ATM-X-MIB
159 objects
No module-level DESCRIPTION found.
Imported Objects
| IF-MIB | ifAlias |
| RAD-MIB | alarmSeverity alarmState radAtm |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.164.3.1.6.10 | NodeadslIf | |||
| 1.3.6.1.4.1.164.3.1.6.10.1 | TableadslConfTable | not-accessible | current | A list of ADSL Configuration entries |
| 1.3.6.1.4.1.164.3.1.6.10.1.1 | RowadslConfEntry | not-accessible | current | An entry in adslConfTable |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.1 | ColumnadslConfCnfgIdx | read-only | current | This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati… |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.2 | ColumnadslConfFramingType | read-write | current | ADSL Frame type |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.3 | ColumnadslConfPilotToneRequest | read-write | current | This parameter controls Pilot Tone Request (PTR). |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.4 | ColumnadslConfTrellisCoding | read-write | current | This parameter enables/disables Trellis error detection code. using error detection code may introduce delays. |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.5 | ColumnadslConfTransmissionMode | read-write | current | This parameter controls transmision mode: Echo Cancellation is required when both ATU-C an ATU-R use the same frequency. Frequency Division (different frequenc… |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.6 | ColumnadslConfStandardCompliance | read-write | current | This parameter indicates standard compliance G.Lite enables extended ADSL range, ease of installation, but requires lower rate. |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.7 | ColumnadslConfMaxBitPerBin | read-write | current | This parameter indicates maximum number of bits per ADSL Bin. Each Bin has bandwidth of 4khz. Range of values for this parameter is 0..15 |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.8 | ColumnadslConfTxStartFreqBin | read-write | current | This parameter controls Transmit Start Bin number. For ADSL Annex A - range of values is 6 to 31. For ADSL Annex B - range of values is 33 to 63. Frequency (in… |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.9 | ColumnadslConfTxEndFreqBin | read-write | current | This parameter controls Transmit End Bin number. For ADSL Annex A - range of values is 6 to 31. For ADSL Annex B - range of values is 33 to 63. requency (in kh… |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.10 | ColumnadslConfRxStartFreqBin | read-write | current | This parameter controls Receive Start Bin number. Range of values for this parameter depends on ADSL Annex supported, and transmisson mode (adslTransmissionMod… |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.11 | ColumnadslConfRxEndFreqBin | read-write | current | This parameter controls Receive End Bin number. Range of values for this parameter depends on ADSL Annex supported, and transmisson mode (adslTransmissionMode)… |
| 1.3.6.1.4.1.164.3.1.6.10.1.1.12 | ColumnadslConfTxPowerAttenuation | read-write | current | This parameter controls Transmit Gain in dB units Range is 0 to 12dB. Resolution is 1 dB |
| 1.3.6.1.4.1.164.3.1.6.10.2 | TableadslStatusTable | not-accessible | current | A list of Adsl Status entries |
| 1.3.6.1.4.1.164.3.1.6.10.2.1 | RowadslStatusEntry | not-accessible | current | An entry in adslStatusTable |
| 1.3.6.1.4.1.164.3.1.6.10.2.1.1 | ColumnadslStatusBitRxRate | read-only | current | This parameter indicates actual Receive (Downstream) rate on this channel Range of values for this parameter is 0 -8,064,000 bps |
| 1.3.6.1.4.1.164.3.1.6.11 | NodesdslIf | |||
| 1.3.6.1.4.1.164.3.1.6.11.1 | TablesdslConfTable | not-accessible | current | A list of SDSL Configuration entries |
| 1.3.6.1.4.1.164.3.1.6.11.1.1 | RowsdslConfEntry | not-accessible | current | An entry in sdslConfTable |
| 1.3.6.1.4.1.164.3.1.6.11.1.1.1 | ColumnsdslConfCnfgIdx | read-only | current | This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. For products that support several configurati… |
| 1.3.6.1.4.1.164.3.1.6.11.1.1.2 | ColumnsdslConfRateAquisition | read-write | current | SDSL Rate Aquisition mode Default value = fixed. |
| 1.3.6.1.4.1.164.3.1.6.11.1.1.3 | ColumnsdslConfBaudRate | read-write | current | SDSL baud rate. Not applicable if rate aquisition is AutoNegotiation. Default value = r144kbps |
| 1.3.6.1.4.1.164.3.1.6.11.1.1.4 | ColumnsdslConfMode | read-write | current | SDSL mode - COE (HTU-C) or CPE (HTU-R) Default value = COE |
| 1.3.6.1.4.1.164.3.1.6.12 | NodeshdslIf | |||
| 1.3.6.1.4.1.164.3.1.6.12.0 | NoderadHdsl2ShdslEvents | |||
| 1.3.6.1.4.1.164.3.1.6.12.0.1 | NotificationradHdsl2ShdslLoopBackTrap | current | This notification indicates that a remote loopback has been activated on the Embedded Operations Channel (EOC) of the SHDSL link. | |
| 1.3.6.1.4.1.164.3.1.6.12.1 | TableshdslEndpointCurrTable | not-accessible | current | This table is an extension of hdsl2ShdslEndpointCurrTable of rfc3276 It contains current status and performance information for segment endpoints in HDSL2/SHDS… |
| 1.3.6.1.4.1.164.3.1.6.12.1.1 | RowshdslEndpointCurrEntry | not-accessible | current | An entry in the shdslEndpointCurrTable. Each entry contains status and performance information relating to a single segment endpoint. It is indexed by the ifIn… |
| 1.3.6.1.4.1.164.3.1.6.12.1.1.1 | Columnhdsl2ShdslEndpointCurrRcvGain | read-only | current | The current receive gain in hundredth of dB. |
| 1.3.6.1.4.1.164.3.1.6.12.1.1.2 | Columnhdsl2ShdslEndpointCurrTransPower | read-only | current | The current transmit power in tenth of dBm. |
| 1.3.6.1.4.1.164.3.1.6.12.1.1.3 | Columnhdsl2ShdslEndpointCurrPowerBO | read-only | current | The current transceiver actual power packoff from 0dB to 6dB. |
| 1.3.6.1.4.1.164.3.1.6.12.1.1.4 | Columnhdsl2ShdslEndpointCurrLineStatus | read-only | current | The current line synchronization status. |
| 1.3.6.1.4.1.164.3.1.6.12.1.1.5 | Columnhdsl2ShdslEndpointCurrOpState | read-only | current | The current operational state. |
| 1.3.6.1.4.1.164.3.1.6.12.1.1.6 | Columnhdsl2ShdslEndpointAccumulatedTimeElapsed | read-only | current | The time (in hundredths of a second) since the accumulated counters were last re-initialized: Accumulated counters are hdsl2ShdslEndpointES, hdsl2ShdslEndpoint… |
| 1.3.6.1.4.1.164.3.1.6.12.1.1.7 | Columnhdsl2ShdslEndpointCurrPsd | read-only | current | This object indicates use of symmetric/asymmetric PSD (Power Spectral Density) Mask for the associated SHDSL Line. |
| 1.3.6.1.4.1.164.3.1.6.12.2 | TableshdslEndpointMaintTable | not-accessible | current | This table supports maintenance operations (eg. loopbacks) to be performed on HDSL2/SHDSL segment endpoints. This table contains live data from equipment. As s… |
| 1.3.6.1.4.1.164.3.1.6.12.2.1 | RowshdslEndpointMaintEntry | not-accessible | current | An entry in the hdsl2ShdslEndpointMaintTable. Each entry corresponds to a single segment endpoint, and is indexed by the ifIndex of the HDSL2/SHDSL line, the U… |
| 1.3.6.1.4.1.164.3.1.6.12.2.1.1 | ColumnshdslMaintPowerBackOff | read-write | current | This object configures the receiver at the associated segment endpoint to operate in default or enhanced power backoff mode. powerbackoff may also be disabled |
| 1.3.6.1.4.1.164.3.1.6.12.3 | TableshdslSpanConfProfileTable | not-accessible | current | This table supports definitions of span configuration profiles for SHDSL lines. HDSL2 does not support these configuration options. This table MUST be maintain… |
| 1.3.6.1.4.1.164.3.1.6.12.3.1 | RowshdslSpanConfProfileEntry | not-accessible | current | Each entry corresponds to a single span configuration profile. Each profile contains a set of span configuration parameters. The configuration parameters in a … |
| 1.3.6.1.4.1.164.3.1.6.12.3.1.1 | Columnhdsl2ShdslSpanConfEocCompatible | read-only | current | This object indicate if device supports only standard EOC messages or also proprietary messages. |
| 1.3.6.1.4.1.164.3.1.6.12.3.1.2 | Columnhdsl2ShdslSpanConfAsymmetricPSDRate | read-write | current | This object indicates line rate when rfc3276.hdsl2ShdslSpanConfPSD value is asymmetric(2). Seleceted rate depends on transmission mode - specified in Annex A o… |
| 1.3.6.1.4.1.164.3.1.6.12.4 | Nodehdsl2ShdslIfConf | |||
| 1.3.6.1.4.1.164.3.1.6.12.4.1 | Tablehdsl2ShdslIfConfTable | not-accessible | current | This table enables configuration of HDSL2/SHDSL interfaces per configuration index. Write operation for products supporting Active+Temp configurations, is poss… |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1 | Rowhdsl2ShdslIfConfEntry | not-accessible | current | An entry in the hdsl2ShdslIfConfTable. |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.1 | Columnhdsl2ShdslIfConfIdx | read-only | current | This object indicates the Idx of the Config being accessed. Idx of 255 relates to the Temporary (Scratch) Config. Write operation for products supporting Activ… |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.2 | Columnhdsl2ShdslSideIdx | read-only | current | This object indicates the Side of the managed object: Near-End or Far-End. |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.3 | Columnhdsl2ShdslMaxBw | read-write | current | Maximum BW (Bandwidth) of the Shdsl Line, in Kbps units. Respective Max No. of TSs = Max. Rate/64 This object can be Set only for a Central (xtuC) unit. |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.4 | Columnhdsl2ShdslPwrBackoff | read-write | current | This object configures the receiver at the associated segment endpoint to enable/disable power backoff mode. This object is similar to hdsl2ShdslMaintPowerBack… |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.5 | Columnhdsl2ShdslTxMode | read-write | current | This object configures the Transmission Mode for the SHDSL Line. This object can be Set only for a Central (xtuC) unit. |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.6 | Columnhdsl2ShdslAttenuationThreshold | read-write | current | This object configures the Attentuation alarm threshold. 0=Off Valid values: 0..127 . |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.7 | Columnhdsl2ShdslSnrMarginThreshold | read-write | current | This object configures the SNR margin alarm threshold. 0=Off Valid values: 0..15 . |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.8 | Columnhdsl2ShdslTs0OverDsl | read-write | current | This object configures the way TS0 will be treated over the SHDSL Line. looped - looped inside transparent - sent transparently over the DSL Line. This object … |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.9 | Columnhdsl2ShdslMode | read-write | current | This object is relevant only for the Near-End device. stuC - Central stuR - Remote . |
| 1.3.6.1.4.1.164.3.1.6.12.4.1.1.10 | Columnhdsl2ShdslTsCompactionMode | read-write | current | This object configures how TSs will be compacted over the SHDSL Line. In both mapping cases (2),(3), only the TSs connected on the E1 line will be transferred … |
| 1.3.6.1.4.1.164.3.1.6.13 | NodevoiceIf | |||
| 1.3.6.1.4.1.164.3.1.6.13.1 | TablevoiceIfCadenceCnfgTable | not-accessible | current | Voice port ringing cadence configuration table. Each ringing cycle, indexed by voiceIfCadenceIdx, consists of a number of ring ON-Period/ring OFF-Period pairs.… |
| 1.3.6.1.4.1.164.3.1.6.13.1.1 | RowvoiceIfCadenceCnfgEntry | not-accessible | current | Ringing cadence configuration per voice port. |
| 1.3.6.1.4.1.164.3.1.6.13.1.1.1 | ColumnvoiceIfCadenceCnfgIdx | not-accessible | current | This object indicates the Idx of the Agent Cnfg the following objects refer to. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For… |
| 1.3.6.1.4.1.164.3.1.6.13.1.1.2 | ColumnvoiceIfCadencePortIdx | not-accessible | current | Voice Port Index. May equal to the value of ifIndex. |
| 1.3.6.1.4.1.164.3.1.6.13.1.1.3 | ColumnvoiceIfCadenceIdx | not-accessible | current | Cadence (ringing type) index. |
| 1.3.6.1.4.1.164.3.1.6.13.1.1.4 | ColumnvoiceIfCadencePeriodIdx | not-accessible | current | Periods index (pair number) in a ringing cycle Cadence. This index must be sequential, start from 1. Its maximum value is the number of pairs of certain ringin… |
| 1.3.6.1.4.1.164.3.1.6.13.1.1.5 | ColumnvoiceIfCadenceRowStatus | read-create | current | This attribute allows to create/delete ringing cadence entry in this table. For Vmux-110, only a single cadance can be defined. Delete action of a period entry… |
| 1.3.6.1.4.1.164.3.1.6.13.1.1.6 | ColumnvoiceIfCadenceRingOnPeriod | read-create | current | Duration (in tenth of seconds) of Ringing (ON) period. |
| 1.3.6.1.4.1.164.3.1.6.13.1.1.7 | ColumnvoiceIfCadenceRingOffPeriod | read-create | current | Duration (in tenth of seconds) of Silence (OFF) period. |
| 1.3.6.1.4.1.164.3.1.6.13.2 | TablevoiceIfCnfgTable | not-accessible | current | Voice port configuration table. |
| 1.3.6.1.4.1.164.3.1.6.13.2.1 | RowvoiceIfCnfgEntry | not-accessible | current | Configuration per voice port. |
| 1.3.6.1.4.1.164.3.1.6.13.2.1.1 | ColumnvoiceIfCnfgIdx | not-accessible | current | This object indicates the Idx of the Agent Cnfg the following objects refer to. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For… |
| 1.3.6.1.4.1.164.3.1.6.13.2.1.2 | ColumnvoiceIfPortIdx | not-accessible | current | Index of voice port . |
| 1.3.6.1.4.1.164.3.1.6.13.2.1.3 | ColumnvoiceIfRingingTimeout | read-write | current | Ringing timeout in seconds. |
| 1.3.6.1.4.1.164.3.1.6.13.2.1.4 | ColumnvoiceIfFlashTimeout | read-write | current | A time period in milliseconds. Flash (Register Recall) is detected if On-Hook time is shorter than this timeout. |
| 1.3.6.1.4.1.164.3.1.6.13.2.1.5 | ColumnvoiceIfRxGain | read-write | current | Receive gain in dB. |
| 1.3.6.1.4.1.164.3.1.6.13.2.1.6 | ColumnvoiceIfTxGain | read-write | current | Transmission gain in dB. |
| 1.3.6.1.4.1.164.3.1.6.13.2.1.7 | ColumnvoiceIfSignalingABCD | read-write | current | Octet String. Nibble No. 1 represents ON Hook (same for Rx and Tx). Nibble No. 2 represents OFF Hook (same for Rx and Tx). Nibble No. 3 represents Reverse Pola… |
| 1.3.6.1.4.1.164.3.1.6.13.2.1.8 | ColumnvoiceIfState | read-only | current | Attribute indicating voice port state. |
| 1.3.6.1.4.1.164.3.1.6.13.2.1.9 | ColumnvoiceIfCallState | read-only | current | Attribute indicating the status of the call on this port. In Vmux devices this attribute is used for FXS ports. |
| 1.3.6.1.4.1.164.6.3 | Nodeservices | |||
| 1.3.6.1.4.1.164.6.3.1 | Nodewfq | |||
| 1.3.6.1.4.1.164.6.3.1.1 | TablewfqTable | not-accessible | current | This table allows user to define several WFQ tables per output port. WFQ supports flows with different bandwidth requirements by giving each queue a weight tha… |
| 1.3.6.1.4.1.164.6.3.1.1.1 | RowwfqEntry | not-accessible | current | An entry in the Weighted Fair Queueing table. |
| 1.3.6.1.4.1.164.6.3.1.1.1.1 | ColumnwfqCnfgIdx | not-accessible | current | This object indicates the Idx of the Agent Cnfg the following objects refer. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For Ag… |
| 1.3.6.1.4.1.164.6.3.1.1.1.2 | ColumnwfqPrtIdx | not-accessible | current | This object indicates a unique port or interface number, for which Weighted Fair Queueing table is applicable . For numbering, see product's spec. For some pro… |
| 1.3.6.1.4.1.164.6.3.1.1.1.3 | ColumnwfqTblIdx | not-accessible | current | This object indicates which Weighted Fair Queueing (WFQ) Table is being used. There can be several tables. For FCD-155 User will select which one will be used … |
| 1.3.6.1.4.1.164.6.3.1.1.1.4 | ColumnwfqQueueIdx | not-accessible | current | This object indicates a queue index. For FCD-155, valid queues are 1..3. The 4th queue is not in MIB. Its weight will be RO, Calculated according to the sum of… |
| 1.3.6.1.4.1.164.6.3.1.1.1.5 | ColumnwfqRowStatus | read-create | current | This object enables Creation/Deletion of rows in the WFQ table. For FCD-155, rows are not created nor destroyed by user. |
| 1.3.6.1.4.1.164.6.3.1.1.1.6 | ColumnwfqWeightValue | read-create | current | This object indicates a relative weight value. User should make sure that the sum of values for all queues will not exceed 100% (sum should be BELOW 100% in or… |
| 1.3.6.1.4.1.164.6.3.2 | NodedscpMapping | |||
| 1.3.6.1.4.1.164.6.3.2.1 | TabledscpMappingTable | not-accessible | current | Mapping of DSCP value to a regenerated priority level. |
| 1.3.6.1.4.1.164.6.3.2.1.1 | RowdscpMappingEntry | not-accessible | current | An entry in dscpMappingTable. |
| 1.3.6.1.4.1.164.6.3.2.1.1.1 | ColumndscpMappingCnfgIdx | not-accessible | current | This object indicates the Idx of the Agent Cnfg the following objects refer to. 255=Temporary Cnfg (when relevant, Set is done only to this configuration). For… |
| 1.3.6.1.4.1.164.6.3.2.1.1.2 | ColumndscpMappingDscpIdx | not-accessible | current | DSCP value of the incoming IP packet |
| 1.3.6.1.4.1.164.6.3.2.1.1.3 | ColumndscpMappingRegenPriority | read-write | current | The Regenerated Priority level the incoming DSCP value is mapped to. For FCD-155, valid values are 0,1,2,3 |
| 1.3.6.1.4.1.164.6.3.3 | NodeifTeQos | |||
| 1.3.6.1.4.1.164.6.3.3.1 | TableifTeQosTable | not-accessible | current | The TE QOS Interface Table. |
| 1.3.6.1.4.1.164.6.3.3.1.1 | RowifTeQosEntry | not-accessible | current | An entry in the TE QOS Interface table. |
| 1.3.6.1.4.1.164.6.3.3.1.1.1 | ColumnifTeQosIdx1 | not-accessible | current | This object indicates the 1st Index of the table. |
| 1.3.6.1.4.1.164.6.3.3.1.1.2 | ColumnifTeQosIdx2 | not-accessible | current | This object indicates the 2nd Index of the table. |
| 1.3.6.1.4.1.164.6.3.3.1.1.3 | ColumnifTeQosIdx3 | not-accessible | current | This object indicates the 3rd Index of the table. |
| 1.3.6.1.4.1.164.6.3.3.1.1.4 | ColumnifTeQosParam | read-write | current | This object is used for QOS attributes of the entry's entities. |
| 1.3.6.1.4.1.164.12.2 | NodeatmGen | |||
| 1.3.6.1.4.1.164.12.2.1 | NodeatmPerfHistory | |||
| 1.3.6.1.4.1.164.12.2.1.1 | NodeatmIfPerformance | |||
| 1.3.6.1.4.1.164.12.2.1.1.4 | Tableaal5VccXTable | not-accessible | current | This table is an extension to AAL5 VCC Table. |
| 1.3.6.1.4.1.164.12.2.1.1.4.1 | Rowaal5VccXEntry | not-accessible | current | This list contains the additional AAL5 VCC performance parameters and is indexed by ifIndex values of AAL5 interfaces and the associated VPI/VCI values. |
| 1.3.6.1.4.1.164.12.2.1.1.4.1.1 | Columnaal5VccInFrames | read-only | current | The number of frames received via this interface. |
| 1.3.6.1.4.1.164.12.2.1.1.4.1.2 | Columnaal5VccOutFrames | read-only | current | The total number of frames transmitted out of the interface. |
| 1.3.6.1.4.1.164.12.2.1.1.4.1.3 | Columnaal5VccUnknownProtocolFrames | read-only | current | The number of frames that were discarded due to unsupported protocol encapsulation on this VCC. |
| 1.3.6.1.4.1.164.12.2.1.1.5 | Tableaal5VccCurrentTable | not-accessible | current | The AAL5 Current table. |
| 1.3.6.1.4.1.164.12.2.1.1.5.1 | Rowaal5VccCurrentEntry | not-accessible | current | An entry in the AAL5 Current table. |
| 1.3.6.1.4.1.164.12.2.1.1.5.1.1 | Columnaal5VccCurrentInFrames | read-only | current | The counter associated with the number of received frames, encountered by the AAL5 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.1.5.1.2 | Columnaal5VccCurrentOutFrames | read-only | current | The counter associated with the number of transmitted frames, encountered by the AAL5 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.1.5.1.3 | Columnaal5VccCurrentUnknownProtocolFrames | read-only | current | The counter associated with the number of frames that were discarded due to unsupported protocol encapsulation, encountered by the AAL5 interface in the curren… |
| 1.3.6.1.4.1.164.12.2.1.1.5.1.4 | Columnaal5VccCurrentCrcErrors | read-only | current | The counter associated with the number of AAL5 CPCS PDUs received with CRC-32 errors, encountered by the AAL5 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.1.5.1.5 | Columnaal5VccCurrentLengthError | read-only | current | The counter associated with the number of received frames with length error, encountered by the AAL5 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.2.1.1.5.1.6 | Columnaal5VccCurrentInputCongestionDropped | read-only | current | The counter associated with the number of dropped frames due to congestion, encountered by the AAL5 interface on the Receive direction in the current 15 minute… |
| 1.3.6.1.4.1.164.12.2.1.1.5.1.7 | Columnaal5VccCurrentOutputCongestionDropped | read-only | current | The counter associated with the number of dropped frames due to congestion, encountered by the AAL5 interface on the Transmit direction in the current 15 minut… |
| 1.3.6.1.4.1.164.12.2.1.1.6 | Tableaal5VccIntervalTable | not-accessible | current | The AAL5 Interval table. |
| 1.3.6.1.4.1.164.12.2.1.1.6.1 | Rowaal5VccIntervalEntry | not-accessible | current | An entry in the AAL5 Interval table. |
| 1.3.6.1.4.1.164.12.2.1.1.6.1.1 | Columnaal5VccIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.164.12.2.1.1.6.1.2 | Columnaal5VccIntervalInFrames | read-only | current | The counter associated with the number of received frames, encountered by the AAL5 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.1.6.1.3 | Columnaal5VccIntervalOutFrames | read-only | current | The counter associated with the number of transmitted frames, encountered by the AAL5 interface in in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.2.1.1.6.1.4 | Columnaal5VccIntervalUnknownProtocolFrames | read-only | current | The counter associated with the number of frames that were discarded due to unsupported protocol encapsulation, encountered by the AAL5 interface in one of the… |
| 1.3.6.1.4.1.164.12.2.1.1.6.1.5 | Columnaal5VccIntervalCrcErrors | read-only | current | The counter associated with the number of AAL5 CPCS PDUs received with CRC-32 errors, encountered by the AAL5 interface in one of the previous 96, individual 1… |
| 1.3.6.1.4.1.164.12.2.1.1.6.1.6 | Columnaal5VccIntervalLengthError | read-only | current | The counter associated with the number of received frames with length error, encountered by the AAL5 interface in one of the previous 96, individual 15 minute,… |
| 1.3.6.1.4.1.164.12.2.1.1.6.1.7 | Columnaal5VccIntervalInputCongestionDropped | read-only | current | The counter associated with the number of dropped frames due to a congestion, encountered by the AAL5 interface on the Receive direction in one of the previous… |
| 1.3.6.1.4.1.164.12.2.1.1.6.1.8 | Columnaal5VccIntervalOutputCongestionDropped | read-only | current | The counter associated with the number of dropped frames due to a congestion, encountered by the AAL5 interface on the Transmit direction in one of the previou… |
| 1.3.6.1.4.1.164.12.9 | NodeatmCes | |||
| 1.3.6.1.4.1.164.12.9.1 | NodeatmCesPerformance | |||
| 1.3.6.1.4.1.164.12.9.1.1 | TableatmCesAal1CurrentTable | not-accessible | current | The AAL1 Current table. |
| 1.3.6.1.4.1.164.12.9.1.1.1 | RowatmCesAal1CurrentEntry | not-accessible | current | An entry in the AAL1 Current table. |
| 1.3.6.1.4.1.164.12.9.1.1.1.1 | ColumnatmCesAal1CurrentIfIndex | read-only | current | The index of the AAL1 interface. It may be ifIndex. |
| 1.3.6.1.4.1.164.12.9.1.1.1.2 | ColumnatmCesAal1CurrentSeqErrors | read-only | current | The counter associated with the number of Discarded cells due to wrong sequence number, encountered by an AAL1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.9.1.1.1.3 | ColumnatmCesAal1CurrentHdrErrors | read-only | current | The counter associated with the number of Discarded cells due to bad AAL1 header error (including correctable and uncorrectable CRC, and bad parity), encounter… |
| 1.3.6.1.4.1.164.12.9.1.1.1.4 | ColumnatmCesAal1CurrentPointerReframes | read-only | current | The counter associated with the number of events in which a SDT pointer isn't where it is expected to be, and must be reacquired, encountered by an AAL1 interf… |
| 1.3.6.1.4.1.164.12.9.1.1.1.5 | ColumnatmCesAal1CurrentBufUnderflows | read-only | current | The counter associated with the number of buffer underflow events, encountered by an AAL1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.9.1.1.1.6 | ColumnatmCesAal1CurrentBufOverflows | read-only | current | The counter associated with the number of buffer overflow events, encountered by an AAL1 interface in the current 15 minute interval. |
| 1.3.6.1.4.1.164.12.9.1.2 | TableatmCesAal1IntervalTable | not-accessible | current | The AAL1 Interval table. |
| 1.3.6.1.4.1.164.12.9.1.2.1 | RowatmCesAal1IntervalEntry | not-accessible | current | An entry in the AAL1 Interval table. |
| 1.3.6.1.4.1.164.12.9.1.2.1.1 | ColumnatmCesAal1IntervalIfIndex | read-only | current | The index of the AAL1 interface. It may be ifIndex. |
| 1.3.6.1.4.1.164.12.9.1.2.1.2 | ColumnatmCesAal1IntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that … |
| 1.3.6.1.4.1.164.12.9.1.2.1.3 | ColumnatmCesAal1IntervalSeqErrors | read-only | current | The counter associated with the number of Discarded cells due to wrong sequence number, encountered by an AAL1 interface in one of the previous 96, individual … |
| 1.3.6.1.4.1.164.12.9.1.2.1.4 | ColumnatmCesAal1IntervalHdrErrors | read-only | current | The counter associated with the number of Discarded cells due to bad AAL1 header error (including correctable and uncorrectable CRC, plus bad parity), encounte… |
| 1.3.6.1.4.1.164.12.9.1.2.1.5 | ColumnatmCesAal1IntervalPointerReframes | read-only | current | The counter associated with the number of events in which a SDT pointer isn't where it is expected to be, and must be reacquired, encountered by an AAL1 interf… |
| 1.3.6.1.4.1.164.12.9.1.2.1.6 | ColumnatmCesAal1IntervalBufUnderflows | read-only | current | The counter associated with the number of buffer underflow events, encountered by an AAL1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.9.1.2.1.7 | ColumnatmCesAal1IntervalBufOverflows | read-only | current | The counter associated with the number of buffer overflow events, encountered by an AAL1 interface in one of the previous 96, individual 15 minute, intervals. |
| 1.3.6.1.4.1.164.12.9.2 | NodeatmCesConfiguration | |||
| 1.3.6.1.4.1.164.12.9.2.1 | TableatmCesXConfTable | not-accessible | current | This table is an extension of atmfCESConfTable table. |
| 1.3.6.1.4.1.164.12.9.2.1.1 | RowatmCesXConfEntry | not-accessible | current | Conceptual row in atmfCESConfTable. A new row is created in this table upon each new CES VCC creation. |
| 1.3.6.1.4.1.164.12.9.2.1.1.1 | ColumnatmCesXConfCBRMode | read-create | current | This parameter defines if to use Spaced or Normal CBR. Normal - TD will be allocated from the policing range (described in ACE2002 NMS SRS). The PCR is expande… |
| 1.3.6.1.4.1.164.12.10 | NoderadAtmRouter | |||
| 1.3.6.1.4.1.164.12.10.1 | TableatmIpoaLisIfMappingXTable | not-accessible | current | This table is an extension of a table from RFC 2320: ipoaLisIfMappingTable - The ATM Logical IP Subnet Interface Mapping Table. |
| 1.3.6.1.4.1.164.12.10.1.1 | RowatmIpoaLisIfMappingXEntry | not-accessible | current | Conceptual row in ipoaLisIfMappingTable. |
| 1.3.6.1.4.1.164.12.10.1.1.1 | ColumnatmIpoaLisIfMappingType | read-create | current | This object indicates the Mapping Type. |
| 1.3.6.1.4.1.164.12.10.1.1.2 | ColumnatmIpoaLisIfMappingIPAddress | read-create | current | This parameter is applicable for atmIpoaLisIfMappingTypeIP=static(2). This parameter is the IP Address assigned by the user when applicable. |
| 1.3.6.1.4.1.164.12.10.2 | ScalarradAtmRtrInAtmArpInterval | read-write | current | The time interval (in seconds) between sending of two InATMARP requests. |
| 1.3.6.1.4.1.164.12.10.3 | ScalarradAtmRtrInAtmArpAgingTime | read-write | current | The time (in seconds) that passes until an entry is deleted, unless this entry was previously updated by a new inATMARP request or response. This variable valu… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Dscp | Integer32 (0..63) | current | A Differentiated Services Code-Point that may be used for marking a traffic stream. |