ATMEL-MIB
124 objects
No module-level DESCRIPTION found.
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1 | Nodeinternet | |||
| 1.3.6.1.1 | Nodedirectory | |||
| 1.3.6.1.2 | Nodemgmt | |||
| 1.3.6.1.3 | Nodeexperimental | |||
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.12350 | Nodeatmel | |||
| 1.3.6.1.4.1.12350.1 | Nodeatmelmib | |||
| 1.3.6.1.4.1.12350.1 | NodetrapReassociation | This trap message is sent when a STAtion's reassosiation request is received. | ||
| 1.3.6.1.4.1.12350.1.1 | NodeatmelSys | |||
| 1.3.6.1.4.1.12350.1.1.1 | NodesysCtrlGRP | |||
| 1.3.6.1.4.1.12350.1.1.1.1 | ScalarsysDescr | read-only | mandatory | A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-syste… |
| 1.3.6.1.4.1.12350.1.1.1.2 | ScalarsysReset | read-write | mandatory | By setting this attribute enable(1), a reset command to the system is issued. |
| 1.3.6.1.4.1.12350.1.1.1.3 | ScalarsysTrapSwitch | read-write | mandatory | This attribute enables the transmission of SNMP.V1 TRAPs. |
| 1.3.6.1.4.1.12350.1.1.1.4 | ScalarsysLoadDefaults | read-write | mandatory | Setting this attribute to enable(1), will cause the system to load the factory default values of all the operational parameters. |
| 1.3.6.1.4.1.12350.1.1.1.5 | ScalarsysDeviceInfo | read-write | mandatory | First 92 bytes of Hardware device configuration struct. HARD_CONFIGURATION_STUCT{ unsigned long StructVersion; unsigned char MacAddress[6]; unsigned char Chann… |
| 1.3.6.1.4.1.12350.1.1.1.6 | ScalarsysUpload | read-write | mandatory | By setting this attribute enable(1), a Upload configuration command to the system is issued. |
| 1.3.6.1.4.1.12350.1.1.1.7 | ScalarSiteSurveyCommand | read-write | mandatory | By setting this attribute enable(1), a Site Survey command to the system is issued. |
| 1.3.6.1.4.1.12350.1.1.1.8 | ScalarsysDeviceMoreInfo | read-write | mandatory | Last 32 bytes of Hardware device configuration struct. HARD_CONFIGURATION_STUCT{ unsigned long StructVersion; unsigned char MacAddress[6]; unsigned char Channe… |
| 1.3.6.1.4.1.12350.1.1.2 | NodeoperBridgingLevel | |||
| 1.3.6.1.4.1.12350.1.1.2.1 | ScalaroperIPAddress | read-write | mandatory | The IP address of this device used over its Ethernet or Wireless LAN port. |
| 1.3.6.1.4.1.12350.1.1.2.2 | ScalaroperIPMask | read-write | mandatory | The IP Network mask used by the IP entity when accessing devices through any of its LAN Ports (Ethernet or WLAN). |
| 1.3.6.1.4.1.12350.1.1.2.3 | ScalaroperEthernetAddress | read-only | mandatory | The MAC Address of the Ethernet interface. |
| 1.3.6.1.4.1.12350.1.1.2.4 | ScalaroperGateway | read-write | mandatory | Gateway default IP address. |
| 1.3.6.1.4.1.12350.1.1.2.5 | ScalaroperDHCP | read-write | mandatory | When setting this attribute to enable(1), the system will enable DHCP protocol. |
| 1.3.6.1.4.1.12350.1.1.2.6 | ScalaroperPrimaryPort | read-write | mandatory | This attribute indicates the primaty port.Ethernet or Wireless. |
| 1.3.6.1.4.1.12350.1.1.2.7 | ScalaroperConfigurationPort | read-write | mandatory | This attribute indicates the Configuration port.Ethernet or Wireless or Both of them. |
| 1.3.6.1.4.1.12350.1.1.2.8 | ScalaroperTrapPort | read-write | mandatory | This attribute indicates the Trap port. |
| 1.3.6.1.4.1.12350.1.1.3 | NodeoperFiltering | |||
| 1.3.6.1.4.1.12350.1.1.3.1 | ScalaroperIPFilter | read-write | mandatory | When setting this attribute to enable(1), the system will filter out all non IP-traffic. |
| 1.3.6.1.4.1.12350.1.1.3.2 | ScalaroperForwarbBcast | read-write | mandatory | When setting this attribute to disable(2), the system will not forward broadcast traffic to the Wireless Port. |
| 1.3.6.1.4.1.12350.1.1.3.3 | ScalaroperSendBackBcast | read-write | mandatory | When setting this attribute to disable(2), the system will not send back broadcast traffic to the Wireless Port. |
| 1.3.6.1.4.1.12350.1.1.3.4 | ScalaroperSendBackUnicast | read-write | mandatory | When setting this attribute to disable(2), the system will not send back unicast traffic to the Wireless Port. |
| 1.3.6.1.4.1.12350.1.1.4 | NodeoperBridgeOperationalMode | |||
| 1.3.6.1.4.1.12350.1.1.4.1 | ScalarbridgeOperationalMode | read-write | mandatory | The Operational Mode of Bridge. Access Point, Access Point client, Wireless Bridge Point to Point, Wireless Bridge Point to MultiPoint. |
| 1.3.6.1.4.1.12350.1.1.4.2 | ScalarbridgeRemoteBridgeBSSID | read-write | mandatory | The Preferred BSSID if the device is at Access Point client mode or the remote Mac if the device is at Wireless Bridge Point to Point mode. |
| 1.3.6.1.4.1.12350.1.1.5 | Nodedot1dStatic | |||
| 1.3.6.1.4.1.12350.1.1.5.1 | ScalarStaticMacFilterNum | read-write | mandatory | This parameter's value indicates the number of the currently static MAC filters. |
| 1.3.6.1.4.1.12350.1.1.5.2 | Tabledot1dStaticTable | not-accessible | mandatory | A table containing filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from … |
| 1.3.6.1.4.1.12350.1.1.5.2.1 | Rowdot1dStaticEntry | not-accessible | mandatory | Filtering information configured into the bridge by (local or network) management specifying the set of ports to which frames received from a specific port and… |
| 1.3.6.1.4.1.12350.1.1.5.2.1.1 | Columndot1dStaticAddress | read-write | mandatory | The destination MAC address in a frame to which this entry's filtering information applies. This object can take the value of a unicast address, a group addres… |
| 1.3.6.1.4.1.12350.1.1.6 | NodeProtocolFilterGRP | |||
| 1.3.6.1.4.1.12350.1.1.6.1 | ScalarProtocolFilterNum | read-write | mandatory | This parameter's value indicates the number of the currently protocol filters. |
| 1.3.6.1.4.1.12350.1.1.6.2 | TableProtocolFilterTable | not-accessible | mandatory | A table containing filtering information configured into the bridge by (local or network) management specifying the set of protocol filter. |
| 1.3.6.1.4.1.12350.1.1.6.2.1 | RowprotocolFilterEntry | not-accessible | mandatory | Filtering information configured into the bridge by (local or network) management specifying the set of protocol filter. |
| 1.3.6.1.4.1.12350.1.1.6.2.1.1 | ColumnProtocolFilterCode | read-write | mandatory | The protocol code configured into the bridge by (local or network) management specifying the set of protocol filter. |
| 1.3.6.1.4.1.12350.1.1.6.2.1.2 | ColumnProtocolFilterDescription | read-write | mandatory | A textual description of the protocol. |
| 1.3.6.1.4.1.12350.1.1.6.2.1.3 | ColumnProtocolFilterActivity | read-write | mandatory | This object indicates the status of this filter. |
| 1.3.6.1.4.1.12350.1.1.7 | NodeEthStatisticsGRP | |||
| 1.3.6.1.4.1.12350.1.1.7.1 | ScalarEthRxStatistics | read-only | mandatory | Ethernet Rx Statistics EthernetRxStatistics{ unsigned long TotalBytesRx; unsigned long TotalPacketsRx; unsigned long PacketCRCErrorRx; unsigned long MulticastP… |
| 1.3.6.1.4.1.12350.1.1.7.2 | ScalarEthTxStatistics | read-only | mandatory | Ethernet Tx Statistics EthernetTxStatistics{ unsigned long TotalBytesTx; unsigned long TotalPacketsTx; unsigned long PacketCRCErrorTx; unsigned long MulticastP… |
| 1.3.6.1.4.1.12350.1.1.8 | NodeTestModeSettingsGRP | |||
| 1.3.6.1.4.1.12350.1.1.8.1 | ScalarTestModeOnOff | read-write | mandatory | When setting this attribute to enable(1), the device be at test mode. |
| 1.3.6.1.4.1.12350.1.1.8.2 | ScalarTestModeCommandStruct | read-write | mandatory | typedef struct __CONT_PKT_TX { UINT8 Channel; UINT8 Antenna; UINT8 TxPower; UINT8 TxRate; UINT8 TxFilter; UINT8 Reserved; UINT16 IFrameTime; UINT32 FrameLength… |
| 1.3.6.1.4.1.12350.1.1.8.8 | ScalarTestModeRadioConfiguration | read-write | mandatory | Configuration of radio derived from tests. CR17 Reg 1-14, CR20 Reg 1-14, CR21 Reg 1-14, CR1, CR2, CR3, CR28, CR29 |
| 1.3.6.1.4.1.12350.1.1.8.9 | ScalarTestModeStatistics | read-only | mandatory | Statistics derive from tests TestModeStatistics{ unsigned long SuccessFrames; unsigned long FailedFrames; unsigned long PacketsTx; } |
| 1.3.6.1.4.1.12350.1.1.9 | NodeAuthorizedSettingsGRP | |||
| 1.3.6.1.4.1.12350.1.1.9.1 | ScalarAuthorizedUserPass | read-write | mandatory | The community name of User. |
| 1.3.6.1.4.1.12350.1.1.9.2 | ScalarAuthorizedAdminPass | read-write | mandatory | The community name of Administrator. |
| 1.3.6.1.4.1.12350.1.1.9.3 | ScalarAuthorizedManufactPass | read-write | mandatory | The community name of Manufacturer. |
| 1.3.6.1.4.1.12350.1.2 | Nodewireless | |||
| 1.3.6.1.4.1.12350.1.2.1 | NodeOperationalSettingsGRP | |||
| 1.3.6.1.4.1.12350.1.2.1.1 | ScalaroperChannelID | read-write | mandatory | The operating frequency channel. Valid numbers are as defind in ISO/IEC 8802-11:1999, 15.4.6.2. |
| 1.3.6.1.4.1.12350.1.2.1.2 | ScalaroperESSIDLength | read-write | mandatory | The ESSID Length |
| 1.3.6.1.4.1.12350.1.2.1.3 | ScalaroperESSID | read-write | mandatory | The network name. The size of the network name should not be more than 32 characters long. |
| 1.3.6.1.4.1.12350.1.2.1.4 | ScalaroperRTSThreshold | read-write | mandatory | This attribute indicates the number of bytes in an MPDU (frame), above which an RTS/CTS handshake will be performed. Setting this attribute to be larger than t… |
| 1.3.6.1.4.1.12350.1.2.1.5 | ScalaroperFragmentationThreshold | read-write | mandatory | This attribute indicates the number of bytes in an MPDU (frame), above which MPDU fragmentation will be performed. |
| 1.3.6.1.4.1.12350.1.2.1.6 | ScalaroperPreambleType | read-write | mandatory | This parameter's value indicates the Preamble Type of device. Short or Long. |
| 1.3.6.1.4.1.12350.1.2.1.7 | ScalaroperAuthenticationType | read-write | mandatory | This attribute indicates the authentication algorithm used during the authentication sequence. The value of this attribute is one of the following: 1 - Open Sy… |
| 1.3.6.1.4.1.12350.1.2.1.8 | ScalaroperBasicRates | read-write | mandatory | This attribute indicates the basic and supported rates of Access Point.Valid format is as defind in ISO/IEC 8802-11:1999 |
| 1.3.6.1.4.1.12350.1.2.1.9 | ScalaroperAutoRateFallBack | read-write | mandatory | This attribute indicates if Auto Rate Fall Back is enable or disable. |
| 1.3.6.1.4.1.12350.1.2.1.10 | ScalaroperAccessPointName | read-write | mandatory | The AP name. |
| 1.3.6.1.4.1.12350.1.2.1.11 | ScalaroperSSIDBroadcasting | read-write | mandatory | This attribute indicates if SSID is broadcasting or not. |
| 1.3.6.1.4.1.12350.1.2.1.12 | ScalaroperAntennaSettings | read-write | mandatory | . |
| 1.3.6.1.4.1.12350.1.2.1.13 | ScalaroperInterRoaming | read-write | mandatory | . |
| 1.3.6.1.4.1.12350.1.2.1.14 | ScalaroperBeaconPeriod | read-write | mandatory | . |
| 1.3.6.1.4.1.12350.1.2.1.15 | ScalaroperDTIM | read-write | mandatory | . |
| 1.3.6.1.4.1.12350.1.2.2 | NodeprivacyGRP | |||
| 1.3.6.1.4.1.12350.1.2.2.1 | ScalardefaultWEPKey1 | write-only | mandatory | A WEP default secret key value. |
| 1.3.6.1.4.1.12350.1.2.2.2 | ScalardefaultWEPKey2 | write-only | mandatory | A WEP default secret key value. |
| 1.3.6.1.4.1.12350.1.2.2.3 | ScalardefaultWEPKey3 | write-only | mandatory | A WEP default secret key value. |
| 1.3.6.1.4.1.12350.1.2.2.4 | ScalardefaultWEPKey4 | write-only | mandatory | A WEP default secret key value. |
| 1.3.6.1.4.1.12350.1.2.2.5 | ScalarprivacyWEPEnable | read-write | mandatory | This attribute, when enable64(1) or enable128(3), indicates that the 802.11 standard encryption mechanism (WEP) is implemented. WEP64, WEP128 or disable |
| 1.3.6.1.4.1.12350.1.2.2.6 | ScalarprivacyDefaultWEPKeyID | read-write | mandatory | This attribute shall indicate the use of the first, second, third or fourth DefaultWEPKey when set to values of one, two, three or four. |
| 1.3.6.1.4.1.12350.1.2.3 | NodeWLstatisticsGRP | |||
| 1.3.6.1.4.1.12350.1.2.3.1 | ScalarwirelessStatistics | read-only | mandatory | Wireless Statistics. 22 elements(ULONG) WirelessStatistics{ unsigned long UnicastTransmittedPackets; unsigned long BroadcastTransmittedPacets; unsigned long Mu… |
| 1.3.6.1.4.1.12350.1.2.4 | NodeWLSiteSurveyGRP | |||
| 1.3.6.1.4.1.12350.1.2.4.1 | ScalarChannelStatus | read-only | mandatory | . |
| 1.3.6.1.4.1.12350.1.2.5 | NodeAssociatedStationsGRP | |||
| 1.3.6.1.4.1.12350.1.2.5.1 | ScalarAssociatedSTAsNum | read-only | mandatory | This parameter's value indicates the number of the currently associated STAtions. Associated STAtions should not be more than 2007. |
| 1.3.6.1.4.1.12350.1.2.5.2 | ScalarAssociatedSTAsInfo | read-only | mandatory | The associated STAtion's Information. AssociatedSTAsInfo{ unsigned sort Num; unsigned char MacAddress[6]; } |
| 1.3.6.1.4.1.12350.1.2.6 | NodeAuthorizedMacAddressesGRP | |||
| 1.3.6.1.4.1.12350.1.2.6.1 | ScalarAuthorizationMacEnable | read-write | mandatory | When setting this attribute to 1, the Authorization Mac Address Table will be enabled in allow mode. When setting this attribute to 3, the Authorization Mac Ad… |
| 1.3.6.1.4.1.12350.1.2.6.2 | ScalarAuthorizedMac | read-write | mandatory | The Authorized Wireless Mac Addresses AuthorizedMacTableString{ unsigned sort Action; //Set 0x01 or Get 0x02 unsigned sort NumOfAllTableAddresses; unsigned sor… |
| 1.3.6.1.4.1.12350.1.2.7 | NodeWLKnownAPGRP | |||
| 1.3.6.1.4.1.12350.1.2.7.1 | ScalarwirelessKnownAPs | read-only | mandatory | . |
| 1.3.6.1.4.1.12350.1.2.7.2 | ScalarSelectedBSSListNumber | write-only | mandatory | . |
| 1.3.6.1.4.1.12350.1.2.8 | NodeAdvancedPrivacyGRP | |||
| 1.3.6.1.4.1.12350.1.2.8.1 | ScalarDot1xEnable | read-write | mandatory | . |
| 1.3.6.1.4.1.12350.1.2.8.2 | ScalarBroadcastKeyPeriod | read-write | mandatory | . |
| 1.3.6.1.4.1.12350.1.2.8.3 | ScalarServerIP | read-write | mandatory | . |
| 1.3.6.1.4.1.12350.1.2.8.4 | ScalarServerSecret | write-only | mandatory | . |
| 1.3.6.1.4.1.12350.1.3 | Nodetraps | |||
| 1.3.6.1.4.1.12350.1.3.1 | ScalartrapSTAMacAddress | read-only | mandatory | The MAC address of a station device |
| 1.3.6.1.4.1.12350.2 | NodetrapRoamOut | This trap message is used to indicate that a STAtion has roamed out of the Wireless bridge's coverage area. | ||
| 1.3.6.1.4.1.12350.3 | NodetrapAssociation | Indicates the reception of an association request packet and the sender STAtion's successful association with the Access Point. | ||
| 1.3.6.1.4.1.12350.4 | NodetrapDisassociation | This trap message is sent when a disassociation notification packet is received from a STAtion. | ||
| 1.3.6.1.4.1.12350.5 | NodetrapAssociationExpire | This trap message is sent when the association's maximum time interval expires for an associated STAtion. | ||
| 1.3.6.1.4.1.12350.6 | NodetrapReset | This trap message is sent when Access Point Resets. | ||
| 1.3.6.1.4.1.12350.7 | NodetrapSettingPingIPAddress | This trap message is sent when the Access Point IP address is set with the transmition of a ping message. | ||
| 1.3.6.1.4.1.12350.8 | NodetrapStartUp | This trap message is sent when Access Point Starts Up. | ||
| 1.3.6.1.4.1.12350.9 | NodetrapFailedToEraseFlash | This trap message is sent when Access Point Failed To Erase Flash. | ||
| 1.3.6.1.4.1.12350.10 | NodetrapAPClientScanning | Access Point Client is scanning... | ||
| 1.3.6.1.4.1.12350.11 | NodetrapAPClientAuthenticating | Access Point Client is authenticating with the AP. | ||
| 1.3.6.1.4.1.12350.12 | NodetrapAPClientAssociating | Access Point Client is associating with the AP. | ||
| 1.3.6.1.4.1.12350.13 | NodetrapAPClientReAssociating | Access Point Client is reassociating with the AP. | ||
| 1.3.6.1.4.1.12350.14 | NodetrapAPClientAuthenticationFailed | Access Point Client has failed authenticating with the AP. | ||
| 1.3.6.1.4.1.12350.15 | NodetrapAPClientAssociationFailed | Access Point Client has failed associating with the AP. | ||
| 1.3.6.1.4.1.12350.16 | NodetrapAPClientConnected | Access Point Client has been connected with the AP. | ||
| 1.3.6.1.4.1.12350.17 | NodetrapAPClientDisconnected | Access Point Client has been disconnected from the AP. | ||
| 1.3.6.1.4.1.12350.18 | NodetrapAPClientScanFailed | Access Point Client has failed scanning! | ||
| 1.3.6.1.4.1.12350.19 | NodetrapAPClientJoinFailed | Access Point Client has failed joining! | ||
| 1.3.6.1.4.1.12350.20 | NodetrapAPClientJoining | Access Point Client is in join state. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |