ATT-CNM-DS3-MIB
31 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.74 | Nodeatt-2 | |||
| 1.3.6.1.4.1.74.1 | Nodeatt-products | |||
| 1.3.6.1.4.1.74.1.9 | Nodeatt-cnmAgent | |||
| 1.3.6.1.4.1.74.2 | Nodeatt-mgmt | |||
| 1.3.6.1.4.1.74.2.15 | Nodeatt-cnm | |||
| 1.3.6.1.4.1.74.2.15.4 | Nodeatt-cnm-ds3 | |||
| 1.3.6.1.4.1.74.2.15.4.1 | TableattCNMds3ConfigTable | not-accessible | mandatory | A list of entries containing configuration information for all DS3 interfaces managed by this system. |
| 1.3.6.1.4.1.74.2.15.4.1.1 | RowattCNMds3ConfigEntry | not-accessible | mandatory | An entry containing configuration information for a particular DS3 interface. |
| 1.3.6.1.4.1.74.2.15.4.1.1.1 | ColumnattCNMds3ConfigIndex | read-only | mandatory | A unique value for each DS3 interface. The interface identified by a particular value of this index is the same interface as identified by the same value of an… |
| 1.3.6.1.4.1.74.2.15.4.1.1.2 | ColumnattCNMds3LineType | read-only | mandatory | This variable indicates the variety of DS3 C-bit application supported by this interface. For SMDS, this variable will have the value ds3ClearChannel, denoting… |
| 1.3.6.1.4.1.74.2.15.4.1.1.3 | ColumnattCNMds3ZeroCoding | read-only | mandatory | This variable describes the variety of zero code suppression/substitution used on the DS3 interface its characteristics. |
| 1.3.6.1.4.1.74.2.15.4.1.1.4 | ColumnattCNMds3ErrorsMaxIntervals | read-only | mandatory | This variable identifies the maximum number of measurement intervals supported for the error counts maintained by this DS3 interface in the attCNMds3ErrorsTabl… |
| 1.3.6.1.4.1.74.2.15.4.1.1.5 | ColumnattCNMds3ErrorsIntervalLen | read-only | mandatory | This variable identifies the number of seconds that make up one complete measurement interval for the error counts maintained by this DS3 interface in the attC… |
| 1.3.6.1.4.1.74.2.15.4.2 | TableattCNMds3StatusTable | not-accessible | mandatory | A list of entries containing status information for all DS3 interfaces managed by this system. |
| 1.3.6.1.4.1.74.2.15.4.2.1 | RowattCNMds3StatusEntry | not-accessible | mandatory | An entry containing status information for a particular DS3 interface. |
| 1.3.6.1.4.1.74.2.15.4.2.1.1 | ColumnattCNMds3StatusIndex | read-only | mandatory | A unique value for each DS3 interface. The interface identified by a particular value of this index is the same interface as identified by the same value of an… |
| 1.3.6.1.4.1.74.2.15.4.2.1.2 | ColumnattCNMds3LineStatus | read-only | mandatory | This variable indicates the most Line Status of this interface. This object is a bit map represented as a sum, therefore, it can represent multiple failures (a… |
| 1.3.6.1.4.1.74.2.15.4.3 | TableattCNMds3ErrorsTable | not-accessible | mandatory | A list of entries containing protocol error counts, maintained during the specified measurement interval, for all DS3 interfaces managed by this system. |
| 1.3.6.1.4.1.74.2.15.4.3.1 | RowattCNMds3ErrorsEntry | not-accessible | mandatory | An entry containing protocol error counts, maintained during the specified measurement interval, for a particular DS3 interface. |
| 1.3.6.1.4.1.74.2.15.4.3.1.1 | ColumnattCNMds3ErrorsIndex | read-only | mandatory | A unique value for each DS3 interface. The interface identified by a particular value of this index is the same interface as identified by the same value of an… |
| 1.3.6.1.4.1.74.2.15.4.3.1.2 | ColumnattCNMds3ErrorsInterval | read-only | mandatory | This variable identifies the measurement interval number for which measurement is provided. It is a number between 1 and XX, where 1 identifies the most recent… |
| 1.3.6.1.4.1.74.2.15.4.3.1.3 | ColumnattCNMds3ErrorsTimeStamp | read-only | mandatory | The time stamp corresponding to the end of the specified measurement interval, as measured in seconds from 00:00:00 UTC (Coordinated Universal Time) January 1,… |
| 1.3.6.1.4.1.74.2.15.4.3.1.4 | ColumnattCNMds3ErrorsLocalTime | read-only | mandatory | The time stamp corresponding to the end of the specified measurement interval. Any fraction is rounded up. It is given as a printable ASCII string showing the … |
| 1.3.6.1.4.1.74.2.15.4.3.1.5 | ColumnattCNMds3LCVs | read-only | mandatory | The counter associated with the number of Line Code Violations encountered by a DS3 interface during the specified measurement interval. For a B3ZS-coded signa… |
| 1.3.6.1.4.1.74.2.15.4.3.1.6 | ColumnattCNMds3LESs | read-only | mandatory | The counter associated with the number of Line Errored Seconds encountered by a DS3 interface during the specified measurement interval. A Line Errored Second … |
| 1.3.6.1.4.1.74.2.15.4.3.1.7 | ColumnattCNMds3LSESs | read-only | mandatory | The counter associated with the number of Line Severely Errored Seconds encountered by a DS3 interface during the specified measurement interval. A Line Severe… |
| 1.3.6.1.4.1.74.2.15.4.3.1.8 | ColumnattCNMds3CVs | read-only | mandatory | The counter associated with the number of Code Violations encountered by a DS3 interface during the specified measurement interval. For SMDS, a DS3 Code Violat… |
| 1.3.6.1.4.1.74.2.15.4.3.1.9 | ColumnattCNMds3ESs | read-only | mandatory | The counter associated with the number of Errored Seconds encountered by a DS3 interface during the specified measurement interval. For SMDS DS3 signals, this … |
| 1.3.6.1.4.1.74.2.15.4.3.1.10 | ColumnattCNMds3SESs | read-only | mandatory | The counter associated with the number of Severely Errored Seconds encountered by a DS3 interface during the specified measurement interval. For SMDS DS3 signa… |
| 1.3.6.1.4.1.74.2.15.4.3.1.11 | ColumnattCNMds3SEFSs | read-only | mandatory | The counter associated with the number of Severely Errored Framing Seconds encountered by a DS3 interface during the specified measurement interval. A Severely… |
| 1.3.6.1.4.1.74.2.15.4.3.1.12 | ColumnattCNMds3UASs | read-only | mandatory | The counter associated with the number of Unavailable Seconds encountered by a DS3 interface during the specified measurement interval. An Unavailable Second i… |