ATT-CNM-ENHANCED-FRAME-RELAY-MIB
70 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.74 | Nodeatt-2 | |||
| 1.3.6.1.4.1.74.1 | Nodeatt-products | |||
| 1.3.6.1.4.1.74.1.9 | Nodeatt-cnmAgent | |||
| 1.3.6.1.4.1.74.2 | Nodeatt-mgmt | |||
| 1.3.6.1.4.1.74.2.15 | Nodeatt-cnm | |||
| 1.3.6.1.4.1.74.2.15.8 | Nodeatt-cnm-efr | |||
| 1.3.6.1.4.1.74.2.15.8.1 | TableattCNMefrConfigTable | not-accessible | mandatory | A list of entries containing configuration information for all Frame Relay interfaces managed by this system. |
| 1.3.6.1.4.1.74.2.15.8.1.1 | RowattCNMefrConfigEntry | not-accessible | mandatory | An entry containing configuration information for a particular Frame Relay interface. |
| 1.3.6.1.4.1.74.2.15.8.1.1.1 | ColumnattCNMefrConfigIndex | read-only | mandatory | A unique value for each Frame Relay interface. The interface identified by a particular value of this index is the same interface as identified by the same val… |
| 1.3.6.1.4.1.74.2.15.8.1.1.2 | ColumnattCNMefrMgmtType | read-only | mandatory | This variable identifies the PVC management scheme being used to manage this Frame Relay interface. A value of auto-set(1) indicates that the interface automat… |
| 1.3.6.1.4.1.74.2.15.8.1.1.3 | ColumnattCNMefrPollDirection | read-only | mandatory | This variable specifies the role the Frame Relay interface performs in a bi-directional PVC management scheme. A value of receive(1) means that this interface … |
| 1.3.6.1.4.1.74.2.15.8.1.1.4 | ColumnattCNMefrFullStatusPoll | read-only | mandatory | This variable identifies the maximum number of Status Enquiry intervals that pass before issuance of a Full Status Enquiry message. This counter is referred to… |
| 1.3.6.1.4.1.74.2.15.8.1.1.5 | ColumnattCNMefrErrorThreshold | read-only | mandatory | This variable identifies the maximum number of errored events that can occur before declaring the Frame Relay interface down. An errored event is the non-recei… |
| 1.3.6.1.4.1.74.2.15.8.1.1.6 | ColumnattCNMefrMonitoredEvents | read-only | mandatory | This variable specifies a value 'm', that is used with the Error Threshold (attCNMefrErrorThreshold) to determine link problems. A link problem is declared whe… |
| 1.3.6.1.4.1.74.2.15.8.1.1.7 | ColumnattCNMefrIntegrityTimer | read-only | mandatory | This variable identifies the number of seconds between successive Status Enquiry messages. This timer is referred to as T391 in the ANSI standard. This variabl… |
| 1.3.6.1.4.1.74.2.15.8.1.1.8 | ColumnattCNMefrPollVerifyTimer | read-only | mandatory | This variable specifies the maximum number of seconds the Frame Relay interface allows between the receipt of Status Enquiries. The expiration of this timer is… |
| 1.3.6.1.4.1.74.2.15.8.1.1.9 | ColumnattCNMefrLMIFlowControl | read-only | mandatory | If the PVC management scheme being used is LMI, then this variable indicates whether this Frame Relay interface uses XON/XOFF as a means of congestion avoidanc… |
| 1.3.6.1.4.1.74.2.15.8.1.1.10 | ColumnattCNMefrSupportedPVCs | read-only | mandatory | This variable specifies the number of DLCIs currently supported on this Frame Relay interface. |
| 1.3.6.1.4.1.74.2.15.8.1.1.11 | ColumnattCNMefrMeasMaxIntervals | read-only | mandatory | This variable identifies the maximum number of measurement intervals supported for the measurements maintained by this Frame Relay interface in the attCNMefrMe… |
| 1.3.6.1.4.1.74.2.15.8.1.1.12 | ColumnattCNMefrMeasIntervalLen | read-only | mandatory | This variable identifies the number of seconds that make up one complete measurement interval for for the measurements maintained by this Frame Relay interface… |
| 1.3.6.1.4.1.74.2.15.8.2 | TableattCNMefrMeasTable | not-accessible | mandatory | A list of entries containing measurement counts, maintained during the specified measurement interval, for all Frame Relay interfaces managed by this system. |
| 1.3.6.1.4.1.74.2.15.8.2.1 | RowattCNMefrMeasEntry | not-accessible | mandatory | An entry containing measurement counts, maintained during the specified measurement interval, for a particular Frame Relay interface. |
| 1.3.6.1.4.1.74.2.15.8.2.1.1 | ColumnattCNMefrMeasIndex | read-only | mandatory | A unique value for each Frame Relay interface. The interface identified by a particular value of this index is the same interface as identified by the same val… |
| 1.3.6.1.4.1.74.2.15.8.2.1.2 | ColumnattCNMefrMeasInterval | read-only | mandatory | This variable identifies the measurement interval number for which measurement is provided. It is a number between 1 and XX, where 1 identifies the most recent… |
| 1.3.6.1.4.1.74.2.15.8.2.1.3 | ColumnattCNMefrMeasTimeStamp | read-only | mandatory | The time stamp corresponding to the end of the specified measurement interval, as measured in seconds from 00:00:00 UTC (Coordinated Universal Time) January 1,… |
| 1.3.6.1.4.1.74.2.15.8.2.1.4 | ColumnattCNMefrMeasLocalTime | read-only | mandatory | The time stamp corresponding to the end of the specified measurement interval. Any fraction is rounded up. It is given as a printable ASCII string showing the … |
| 1.3.6.1.4.1.74.2.15.8.2.1.5 | ColumnattCNMefrReceivedOctets | read-only | mandatory | The counter associated with the number of bytes received by this Frame Relay interface during the specified measurement interval. |
| 1.3.6.1.4.1.74.2.15.8.2.1.6 | ColumnattCNMefrSentOctets | read-only | mandatory | The counter associated with the number of bytes sent by this Frame Relay interface during the specified measurement interval. |
| 1.3.6.1.4.1.74.2.15.8.2.1.7 | ColumnattCNMefrReceivedFrames | read-only | mandatory | The counter associated with the number of frames received by this Frame Relay interface during the specified measurement interval. |
| 1.3.6.1.4.1.74.2.15.8.2.1.8 | ColumnattCNMefrSentFrames | read-only | mandatory | The counter associated with the number of frames sent by this Frame Relay interface during the specified measurement interval. |
| 1.3.6.1.4.1.74.2.15.8.2.1.9 | ColumnattCNMefrBadFrames | read-only | mandatory | The counter associated with the number of frames received by this Frame Relay interface that are faulty. The interface discards bad frames received. A bad fram… |
| 1.3.6.1.4.1.74.2.15.8.2.1.10 | ColumnattCNMefrReceiverOverruns | read-only | mandatory | The counter associated with the number of receiver overruns occurred at this Frame Relay interface during the specified measurement interval. A receiver overru… |
| 1.3.6.1.4.1.74.2.15.8.2.1.11 | ColumnattCNMefrIngressUtil | read-only | mandatory | The counter associated with the utilization level of the Frame Relay interface, derived as the total bytes received (in the ingress direction) divided by the l… |
| 1.3.6.1.4.1.74.2.15.8.2.1.12 | ColumnattCNMefrEgressUtil | read-only | mandatory | The counter associated with the utilization level of the Frame Relay interface, derived as the total bytes sent (in the egress direction) divided by the line s… |
| 1.3.6.1.4.1.74.2.15.8.3 | TableattCNMefrPVCConfigTable | not-accessible | mandatory | A list of entries containing configuration information for all Frame Relay interfaces managed by this system. |
| 1.3.6.1.4.1.74.2.15.8.3.1 | RowattCNMefrPVCConfigEntry | not-accessible | mandatory | An entry containing configuration information for a particular Frame Relay interface. |
| 1.3.6.1.4.1.74.2.15.8.3.1.1 | ColumnattCNMefrPVCConfigIfIndex | read-only | mandatory | A unique value for each Frame Relay interface. The interface identified by a particular value of this index is the same interface as identified by the same val… |
| 1.3.6.1.4.1.74.2.15.8.3.1.2 | ColumnattCNMefrPVCConfigIndex | read-only | mandatory | The DLCI number on a Frame Relay interface that identifies a unique Data Link Connection. |
| 1.3.6.1.4.1.74.2.15.8.3.1.3 | ColumnattCNMefrPVCServiceType | read-only | mandatory | This variable specifies whether the DLCI is a multicast or PVC (unicast) DLCI. A PVC DLCI is used to connect a specific endpoint to another endpoint, whereas a… |
| 1.3.6.1.4.1.74.2.15.8.3.1.4 | ColumnattCNMefrLocalCIR | read-only | mandatory | This variable specifies the Committed Information Rate (CIR) for data transmitted on this PVC from the local device through the network via this Frame Relay in… |
| 1.3.6.1.4.1.74.2.15.8.3.1.5 | ColumnattCNMefrLocalCommittedBurst | read-only | mandatory | This variable specifies the Committed Burst (Bc) for data transmitted on this PVC from the local device through the network via this Frame Relay interface. |
| 1.3.6.1.4.1.74.2.15.8.3.1.6 | ColumnattCNMefrLocalExcessBurst | read-only | mandatory | This variable specifies the Excess Burst (Be) for data transmitted on this PVC from the local device through the network via this Frame Relay interface. |
| 1.3.6.1.4.1.74.2.15.8.3.1.7 | ColumnattCNMefrRemoteCIR | read-only | mandatory | This variable specifies the Committed Information Rate (CIR) for data transmitted on this PVC from the remote device, through the network, to the local device … |
| 1.3.6.1.4.1.74.2.15.8.3.1.8 | ColumnattCNMefrRemoteCommittedBurst | read-only | mandatory | This variable specifies the Committed Burst (Bc) for data transmitted on this PVC from the remote device, through the network, to the local device via this Fra… |
| 1.3.6.1.4.1.74.2.15.8.3.1.9 | ColumnattCNMefrRemoteExcessBurst | read-only | mandatory | This variable specifies the Excess Burst (Be) for data transmitted on this PVC from the remote device, through the network, to the local device via this Frame … |
| 1.3.6.1.4.1.74.2.15.8.3.1.10 | ColumnattCNMefrMulticastGroup1 | read-only | mandatory | A multicast (group) DLCI that includes this DLCI as one of its members. Any messages addressed to this multicast DLCI will be sent to this PVC and to other PVC… |
| 1.3.6.1.4.1.74.2.15.8.3.1.11 | ColumnattCNMefrMulticastGroup2 | read-only | mandatory | A multicast (group) DLCI that includes this DLCI as one of its members. Any messages addressed to this multicast DLCI will be sent to this PVC and to other PVC… |
| 1.3.6.1.4.1.74.2.15.8.3.1.12 | ColumnattCNMefrMulticastGroup3 | read-only | mandatory | A multicast (group) DLCI that includes this DLCI as one of its members. Any messages addressed to this multicast DLCI will be sent to this PVC and to other PVC… |
| 1.3.6.1.4.1.74.2.15.8.3.1.13 | ColumnattCNMefrMulticastGroup4 | read-only | mandatory | A multicast (group) DLCI that includes this DLCI as one of its members. Any messages addressed to this multicast DLCI will be sent to this PVC and to other PVC… |
| 1.3.6.1.4.1.74.2.15.8.3.1.14 | ColumnattCNMefrPVCMeasMaxIntervals | read-only | mandatory | This variable identifies the maximum number of measurement intervals supported for the measurements maintained by this Frame Relay interface in the attCNMefrPV… |
| 1.3.6.1.4.1.74.2.15.8.3.1.15 | ColumnattCNMefrPVCMeasIntervalLen | read-only | mandatory | This variable identifies the number of seconds that make up one complete measurement interval for for the measurements maintained by this Frame Relay interface… |
| 1.3.6.1.4.1.74.2.15.8.4 | TableattCNMefrPVCMeasTable | not-accessible | mandatory | A list of entries containing PVC-level measurement counts, maintained during the specified measurement interval, for all the Frame Relay interfaces managed by … |
| 1.3.6.1.4.1.74.2.15.8.4.1 | RowattCNMefrPVCMeasEntry | not-accessible | mandatory | An entry containing measurement counts, maintained during the specified measurement interval, for a particular PVC on a specific Frame Relay interface. |
| 1.3.6.1.4.1.74.2.15.8.4.1.1 | ColumnattCNMefrPVCMeasIfIndex | read-only | mandatory | A unique value for each Frame Relay interface. The interface identified by a particular value of this index is the same interface as identified by the same val… |
| 1.3.6.1.4.1.74.2.15.8.4.1.2 | ColumnattCNMefrPVCMeasIndex | read-only | mandatory | The DLCI number on a Frame Relay interface that identifies a unique Data Link Connection. |
| 1.3.6.1.4.1.74.2.15.8.4.1.3 | ColumnattCNMefrPVCMeasInterval | read-only | mandatory | This variable identifies the measurement interval number for which measurement is provided. It is a number between 1 and XX, where 1 identifies the most recent… |
| 1.3.6.1.4.1.74.2.15.8.4.1.4 | ColumnattCNMefrPVCMeasTimeStamp | read-only | mandatory | The time stamp corresponding to the end of the specified measurement interval, as measured in seconds from 00:00:00 UTC (Coordinated Universal Time) January 1,… |
| 1.3.6.1.4.1.74.2.15.8.4.1.5 | ColumnattCNMefrPVCMeasLocalTime | read-only | mandatory | The time stamp corresponding to the end of the specified measurement interval. Any fraction is rounded up. It is given as a printable ASCII string showing the … |
| 1.3.6.1.4.1.74.2.15.8.4.1.6 | ColumnattCNMefrPVCReceivedFrames | read-only | mandatory | The counter associated with the number of frames received by this Frame Relay PVC during the specified measurement interval. |
| 1.3.6.1.4.1.74.2.15.8.4.1.7 | ColumnattCNMefrPVCSentFrames | read-only | mandatory | The counter associated with the number of frames sent by this Frame Relay PVC during the specified measurement interval. |
| 1.3.6.1.4.1.74.2.15.8.4.1.8 | ColumnattCNMefrDiscardEligibilityFrames | read-only | mandatory | The counter associated with the number of ingress frames received by this PVC that exceed the Committed Burst Size but don't exceed the maximum throughput conf… |
| 1.3.6.1.4.1.74.2.15.8.4.1.9 | ColumnattCNMefrBurstSizeExceeded | read-only | mandatory | The counter associated with the number of frames that were discarded due to exceeding the maximum throughput configured for the PVC (the Committed Burst Size p… |
| 1.3.6.1.4.1.74.2.15.8.4.1.10 | ColumnattCNMefrCongestionAtIngress | read-only | mandatory | The counter associated with the number of times frames received by this PVC had to be discarded because buffers were unavailable or congestion control was bein… |
| 1.3.6.1.4.1.74.2.15.8.4.1.11 | ColumnattCNMefrCongestionAtEgress | read-only | mandatory | The counter associated with the number of times frames sent by this PVC had to be discarded because buffers were unavailable or congestion control was being en… |
| 1.3.6.1.4.1.74.2.15.8.5 | TableattCNMefrPVCStatusTable | not-accessible | mandatory | A list of entries containing status information about Data Link Connections on Frame Relay interfaces managed by this system. |
| 1.3.6.1.4.1.74.2.15.8.5.1 | RowattCNMefrPVCStatusEntry | not-accessible | mandatory | An entry containing status information about a particular Data Link Connection on a specific Frame Relay interface. |
| 1.3.6.1.4.1.74.2.15.8.5.1.1 | ColumnattCNMefrPVCStatusIfIndex | read-only | mandatory | A unique value for each Frame Relay interface. The interface identified by a particular value of this index is the same interface as identified by the same val… |
| 1.3.6.1.4.1.74.2.15.8.5.1.2 | ColumnattCNMefrPVCStatusIndex | read-only | mandatory | The DLCI number on a Frame Relay interface that identifies a unique Data Link Connection. |
| 1.3.6.1.4.1.74.2.15.8.5.1.3 | ColumnattCNMefrPVCAdminStatus | read-only | mandatory | The desired state of this Data Link Connection. |
| 1.3.6.1.4.1.74.2.15.8.5.1.4 | ColumnattCNMefrPVCOperStatus | read-only | mandatory | The current operational state of this Data Link Connection. |