AX60
928 objects
This MIB module provides definitions for WORK Microwave A-Series devices.
Imported Objects
| SNMPv2-SMI | Counter32 Gauge32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| WORK | ax60 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.29890.1.8.1.0 | Identityax60MIB | This MIB module provides definitions for WORK Microwave A-Series devices. | ||
| 1.3.6.1.4.1.29890.1.8.1.1 | Nodeax60ModulatorConfig | |||
| 1.3.6.1.4.1.29890.1.8.1.1.1 | Scalarax60MODOutput | read-write | current | Signal output on or off. |
| 1.3.6.1.4.1.29890.1.8.1.1.2 | Scalarax60MODTXFrequency | read-write | current | TX frequency. |
| 1.3.6.1.4.1.29890.1.8.1.1.3 | Scalarax60MODTXLevel | read-write | current | TX level in 1/10 dBm. |
| 1.3.6.1.4.1.29890.1.8.1.1.4 | Scalarax60MODSymbolRate | read-write | current | Symbol rate in sps. |
| 1.3.6.1.4.1.29890.1.8.1.1.5 | Tableax60MODBBChannelsTable | not-accessible | current | A table of BBChannels. Max. 64 entries. |
| 1.3.6.1.4.1.29890.1.8.1.1.5.1 | Rowax60MODBBChannelsEntry | not-accessible | current | An entry in the BBChannels table. |
| 1.3.6.1.4.1.29890.1.8.1.1.5.1.1 | Columnax60MODBBChannelsIndex | read-only | current | BB Channel index. |
| 1.3.6.1.4.1.29890.1.8.1.1.5.1.3 | Columnax60MODBBChannelsModulationFEC | read-write | current | Modulation and FEC Rate. |
| 1.3.6.1.4.1.29890.1.8.1.1.5.1.4 | Columnax60MODBBChannelsPilots | read-write | current | Pilots. |
| 1.3.6.1.4.1.29890.1.8.1.1.5.1.6 | Columnax60MODBBChannelsEncapsulation | read-write | current | Encapsulation. |
| 1.3.6.1.4.1.29890.1.8.1.1.5.1.8 | Columnax60MODBBChannelsMultistreamID | read-write | current | Multistream ID. |
| 1.3.6.1.4.1.29890.1.8.1.1.5.1.9 | Columnax60MODBBChannelsTrafficGenerator | read-write | current | Traffic Generator. |
| 1.3.6.1.4.1.29890.1.8.1.1.5.1.10 | Columnax60MODBBChannelsTimeout | read-write | current | Timeout in ms. |
| 1.3.6.1.4.1.29890.1.8.1.1.5.1.11 | Columnax60BBChannelsScheme | read-only | current | Scheme of Modcods (dependent on MODCOD read-only). |
| 1.3.6.1.4.1.29890.1.8.1.1.5.1.12 | Columnax60MODACMChannelOperation | read-write | current | ACM Channel Operation. |
| 1.3.6.1.4.1.29890.1.8.1.1.5.1.13 | Columnax60MODCODLowerLimit | read-write | current | Modulation lower limit. |
| 1.3.6.1.4.1.29890.1.8.1.1.5.1.14 | Columnax60MODCODUpperLimit | read-write | current | Modulation upper limit. |
| 1.3.6.1.4.1.29890.1.8.1.1.5.1.15 | Columnax60MODACMChannelLevelOffset | read-write | current | Level Offset in 10th dB. |
| 1.3.6.1.4.1.29890.1.8.1.1.5.1.16 | Columnax60MODACMChannelLevelHyst | read-write | current | Level Hysteresis in 10th dB. |
| 1.3.6.1.4.1.29890.1.8.1.1.5.1.17 | Columnax60MODBBChannelsNCRPIDfMPE | read-write | current | NCR PID for MPE. |
| 1.3.6.1.4.1.29890.1.8.1.1.5.1.18 | Columnax60MODBBChannelsMergeTSoIP | read-write | current | Merge TSoIP. |
| 1.3.6.1.4.1.29890.1.8.1.1.5.1.20 | Columnax60MODBBChannelsDVBTableOperation | read-write | current | DVB Table Operation. |
| 1.3.6.1.4.1.29890.1.8.1.1.7 | Scalarax60MODPLScrambling | read-write | current | DVB-S2 PL scrambling code. |
| 1.3.6.1.4.1.29890.1.8.1.1.8 | Scalarax60MODRollOff | read-write | current | Roll-off factor 35%, 25% or 20%, indexed according to DVB-S2. |
| 1.3.6.1.4.1.29890.1.8.1.1.9 | Scalarax60MODSlopeCompensation | read-write | current | Configuration of the gain slope equalizer within the modulator. |
| 1.3.6.1.4.1.29890.1.8.1.1.10 | Scalarax60MODSpectrumInversion | read-write | current | Spectrum inversion. |
| 1.3.6.1.4.1.29890.1.8.1.1.11 | Scalarax60MODTestMode | read-write | current | Test mode. |
| 1.3.6.1.4.1.29890.1.8.1.1.15 | Tableax60MODBBTSTable | not-accessible | current | Table of the BBChannel Traffic Shaper. Max. 64 entries. |
| 1.3.6.1.4.1.29890.1.8.1.1.15.1 | Rowax60MODBBTSEntry | not-accessible | current | An entry in the BBChannel Traffic Shaper table. |
| 1.3.6.1.4.1.29890.1.8.1.1.15.1.1 | Columnax60MODBBTSIndex | read-only | current | BB Channel index. |
| 1.3.6.1.4.1.29890.1.8.1.1.15.1.2 | Columnax60MODBBTSMin | read-write | current | Minimum in sps. |
| 1.3.6.1.4.1.29890.1.8.1.1.15.1.3 | Columnax60MODBBTSMax | read-write | current | Maximum in sps. |
| 1.3.6.1.4.1.29890.1.8.1.1.19 | Nodeax60MODCarrierID | |||
| 1.3.6.1.4.1.29890.1.8.1.1.19.1 | Scalarax60MODCIDOperation | read-write | current | Carrier ID Operation. |
| 1.3.6.1.4.1.29890.1.8.1.1.19.2 | Scalarax60MODCIDLatitude | read-write | current | Carrier ID Latitude in 1/1000000 degrees north. |
| 1.3.6.1.4.1.29890.1.8.1.1.19.3 | Scalarax60MODCIDLongitude | read-write | current | Carrier ID Longitude in 1/1000000 degrees east. |
| 1.3.6.1.4.1.29890.1.8.1.1.19.4 | Scalarax60MODCIDTelephone | read-write | current | Carrier ID Telephone. |
| 1.3.6.1.4.1.29890.1.8.1.1.19.5 | Scalarax60MODCIDUserData | read-write | current | Carrier ID User Data. |
| 1.3.6.1.4.1.29890.1.8.1.1.19.6 | Scalarax60MODCIDSendMask | read-write | current | Carrier ID Send Mask. |
| 1.3.6.1.4.1.29890.1.8.1.1.19.7 | Scalarax60MODCIDGID | read-only | current | Carrier ID Global Unique ID. |
| 1.3.6.1.4.1.29890.1.8.1.1.21 | Scalarax60MOD10MHzOutput | read-write | current | Enables 10MHz Reference Output. |
| 1.3.6.1.4.1.29890.1.8.1.1.22 | Scalarax60MODBBChannelsMultistream | read-write | current | Multistream Operation. |
| 1.3.6.1.4.1.29890.1.8.1.1.24 | Scalarax60MODBBTSOperation | read-write | current | BBChannel Traffic Shaper Operation. |
| 1.3.6.1.4.1.29890.1.8.1.1.25 | Nodeax60MODSingleTSConfig | |||
| 1.3.6.1.4.1.29890.1.8.1.1.25.1 | Scalarax60MODSTSScheme | read-only | current | Scheme of Modcods Single TS (dependent on MODCOD read-only). |
| 1.3.6.1.4.1.29890.1.8.1.1.25.2 | Scalarax60MODSTSModcod | read-write | current | ModCod Single TS. |
| 1.3.6.1.4.1.29890.1.8.1.1.25.3 | Scalarax60MODSTSPilots | read-write | current | Pilots Single TS. |
| 1.3.6.1.4.1.29890.1.8.1.1.25.4 | Scalarax60MODSTSModDatarate | read-only | current | Max. Data Rate Single TS. |
| 1.3.6.1.4.1.29890.1.8.1.1.25.5 | Scalarax60MODSTSClockSync | read-write | current | TX Clock Synchronisation Single TS. |
| 1.3.6.1.4.1.29890.1.8.1.1.25.6 | Scalarax60MODSTSNullPacket | read-write | current | TS Null Packet Deletion Single TS. |
| 1.3.6.1.4.1.29890.1.8.1.1.25.7 | Scalarax60MODSTSStillPicture | read-write | current | Still Picture Single TS. |
| 1.3.6.1.4.1.29890.1.8.1.1.25.8 | Scalarax60MODSTSStillPicturePmtPid | read-write | current | Still Picture PMT PID Single TS. |
| 1.3.6.1.4.1.29890.1.8.1.1.25.9 | Scalarax60MODSTSStillPictureVidPid | read-write | current | Still Picture VID PID Single TS. |
| 1.3.6.1.4.1.29890.1.8.1.1.26 | Nodeax60MODSTSInput | |||
| 1.3.6.1.4.1.29890.1.8.1.1.26.1 | Scalarax60MODSTSActiveTSoverIP | read-write | current | Single TS Input active TSoverIP. |
| 1.3.6.1.4.1.29890.1.8.1.1.26.2 | Scalarax60MODSTSActiveTS | read-write | current | Single TS Input active TS. |
| 1.3.6.1.4.1.29890.1.8.1.1.26.3 | Scalarax60MODSTSTSFaultMode | read-write | current | Single TS Input TS Fault Mode. |
| 1.3.6.1.4.1.29890.1.8.1.1.26.4 | Scalarax60MODSTSActiveStreamLoss | read-write | current | Single TS Input Active Stream Loss. |
| 1.3.6.1.4.1.29890.1.8.1.1.26.5 | Scalarax60MODSTSPassiveStreamLoss | read-write | current | Single TS Input Passive Stream Loss. |
| 1.3.6.1.4.1.29890.1.8.1.1.26.6 | Scalarax60MODSTSDVBNotInSync | read-write | current | Single TS Input DVB Not in Sync Type. |
| 1.3.6.1.4.1.29890.1.8.1.1.26.7 | Scalarax60MODSTSFIFOFull | read-write | current | Single TS Input FIFO Full Type. |
| 1.3.6.1.4.1.29890.1.8.1.1.26.8 | Scalarax60MODSTSActiveTSoverIPInf1 | read-write | current | Single TS Input active TSoverIP INF1 for dual datainterface. |
| 1.3.6.1.4.1.29890.1.8.1.1.26.9 | Scalarax60MODSTSActiveTSoverIPInf2 | read-write | current | Single TS Input active TSoverIP INF2 for dual datainterface. |
| 1.3.6.1.4.1.29890.1.8.1.1.26.10 | Scalarax60MODSTSActiveTSoverIPCombined | read-write | current | Single TS Input active TSoverIP Combined for dual datainterface. |
| 1.3.6.1.4.1.29890.1.8.1.1.26.11 | Scalarax60MODSTSClockPLLLock | read-write | current | Single TS Input Clock PLL Lock Type. |
| 1.3.6.1.4.1.29890.1.8.1.1.26.12 | Scalarax60MODSTSASIPacketSize | read-write | current | Single TS Input ASI TS Packet Size. |
| 1.3.6.1.4.1.29890.1.8.1.1.26.13 | Scalarax60MODSTSTSFaultTime | read-write | current | Single TS Input TS Fault Time in ms. |
| 1.3.6.1.4.1.29890.1.8.1.1.27 | Tableax60MODSTSTSInputTable | not-accessible | current | Table of the Single TS Input. Max. 2 entries. |
| 1.3.6.1.4.1.29890.1.8.1.1.27.1 | Rowax60MODSTSTSInputTableEntry | not-accessible | current | An entry in the Single TS Input Table. |
| 1.3.6.1.4.1.29890.1.8.1.1.27.1.1 | Columnax60MODSTSTSInputIndex | read-only | current | Single TS Input, TS Input Index. |
| 1.3.6.1.4.1.29890.1.8.1.1.27.1.2 | Columnax60MODSTSTSInput | read-write | current | Single TS Input, TS Input. |
| 1.3.6.1.4.1.29890.1.8.1.1.28 | Tableax60MODSTSInputTSoIPTable | not-accessible | current | Table of the Single TS Input TSoIP. Max. 2 entries. |
| 1.3.6.1.4.1.29890.1.8.1.1.28.1 | Rowax60MODSTSInputTSoIPTableEntry | not-accessible | current | An entry in the Single TS Input TSoIP Table. |
| 1.3.6.1.4.1.29890.1.8.1.1.28.1.1 | Columnax60MODSTSInputTSoIPIndex | read-only | current | Single TS Input TSoIP index. |
| 1.3.6.1.4.1.29890.1.8.1.1.28.1.2 | Columnax60MODSTSInputTSoIPProtocol | read-write | current | Single TS Input TSoIP Protocol. |
| 1.3.6.1.4.1.29890.1.8.1.1.28.1.3 | Columnax60MODSTSInputDataTSoIPPort | read-write | current | Single TS Input TSoIP Port. |
| 1.3.6.1.4.1.29890.1.8.1.1.28.1.4 | Columnax60MODSTSInputTSoIPMulticastMode | read-write | current | Single TS Input TSoIP Multicast Mode. |
| 1.3.6.1.4.1.29890.1.8.1.1.28.1.5 | Columnax60MODSTSInputTSoIPMulticastAddr | read-write | current | Single TS Input TSoIP Multicast Address. |
| 1.3.6.1.4.1.29890.1.8.1.1.28.1.6 | Columnax60MODSTSInputTSoIPMulticastFilterMode | read-write | current | Single TS Input TSoIP Multicast Filter Mode. |
| 1.3.6.1.4.1.29890.1.8.1.1.28.1.7 | Columnax60MODSTSInputTSoIPMulticastSourceList | read-write | current | Single TS Input TSoIP Multicast Source List (up to 16 Addresses separated by ';'). |
| 1.3.6.1.4.1.29890.1.8.1.1.28.1.8 | Columnax60MODSTSInputTSoIPIPOutDelay | read-write | current | Single TS Input TSoIP Output Delay. |
| 1.3.6.1.4.1.29890.1.8.1.1.28.1.9 | Columnax60MODSTSInputTSoIPInputSelection | read-write | current | Single TS Input TSoIP Input selection.Same value cannot be selected for different inputs, setting first to 'none' will help. |
| 1.3.6.1.4.1.29890.1.8.1.1.28.1.10 | Columnax60MODSTSInputTSoIPMulticastFilterCheck | read-write | current | Single TS Input TSoIP Input multicast filter check selection. |
| 1.3.6.1.4.1.29890.1.8.1.1.28.1.11 | Columnax60MODSTSInputTSoIPInputName | read-write | current | Single TS Input TSoIP custom Name / Label. Up to 33 Characters. |
| 1.3.6.1.4.1.29890.1.8.1.1.29 | Scalarax60MODTXProcessing | read-write | current | TX Processing |
| 1.3.6.1.4.1.29890.1.8.1.1.30 | Scalarax60MODCCMLegacyMode | read-write | current | CCM Legacy Mode Off (-1) BBChannels (0-63) |
| 1.3.6.1.4.1.29890.1.8.1.1.31 | Tableax60MODBBIStreamInputTable | not-accessible | current | Table of the BBoIP Stream Input. Max. 2 entries. |
| 1.3.6.1.4.1.29890.1.8.1.1.31.1 | Rowax60MODBBIStreamInputTableEntry | not-accessible | current | An entry in the BBoverIP Stream Input Table. |
| 1.3.6.1.4.1.29890.1.8.1.1.31.1.1 | Columnax60MODBBIStreamInputIndex | read-only | current | BBoverIP Stream Input Index. |
| 1.3.6.1.4.1.29890.1.8.1.1.31.1.2 | Columnax60MODBBIStreamInputProtocol | read-write | current | BBoverIP Stream Input Protocol. |
| 1.3.6.1.4.1.29890.1.8.1.1.31.1.3 | Columnax60MODBBIStreamInputPort | read-write | current | BBoverIP Stream Input Port. |
| 1.3.6.1.4.1.29890.1.8.1.1.31.1.4 | Columnax60MODBBIStreamInputBBChannel | read-write | current | BBoverIP Stream Input BB Channel. |
| 1.3.6.1.4.1.29890.1.8.1.1.31.1.5 | Columnax60MODBBIStreamInputControlMessages | read-write | current | BBoverIP Stream Input Control Messages every. |
| 1.3.6.1.4.1.29890.1.8.1.1.31.1.6 | Columnax60MODBBIStreamInputControlPort | read-write | current | BBoverIP Stream Input Control Port. |
| 1.3.6.1.4.1.29890.1.8.1.1.31.1.7 | Columnax60MODBBIStreamInputControlThreshold | read-write | current | BBoverIP Stream Input Control Threshold. |
| 1.3.6.1.4.1.29890.1.8.1.1.31.1.8 | Columnax60MODBBIStreamAdaptionHeader | read-write | current | BBoverIP Stream Adaption Header. |
| 1.3.6.1.4.1.29890.1.8.1.1.31.1.9 | Columnax60MODBBIStreamInputControlTimeout | read-write | current | BBoverIP Stream Input Control Timeout. |
| 1.3.6.1.4.1.29890.1.8.1.1.32 | Scalarax60MODMergeTSoIPwMPE | read-write | current | Merge TSoIP w/ MPE |
| 1.3.6.1.4.1.29890.1.8.1.1.33 | Scalarax60MOD10MHzRefInput | read-write | current | 10MHz Reference Input. |
| 1.3.6.1.4.1.29890.1.8.1.1.34 | Tableax60MODDVBTable | not-accessible | current | Table of the DVB IDs, Names and Periods for each BBChannel. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1 | Rowax60MODDVBTableEntry | not-accessible | current | An entry in the DVB Table (Index correlates to BBChannel). |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.1 | Columnax60MODDVBTableIndex | read-only | current | DVB Table Index correlates to BBChannel. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.2 | Columnax60MODDVBTableINTPID | read-write | current | DVB Table INT PID. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.3 | Columnax60MODDVBTablePMTPID | read-write | current | DVB Table PMT PID. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.4 | Columnax60MODDVBTableTSID | read-write | current | DVB Table TS ID. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.5 | Columnax60MODDVBTableServiceID | read-write | current | DVB Table Service ID. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.6 | Columnax60MODDVBTableOrigNetwID | read-write | current | DVB Table Original Network ID. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.7 | Columnax60MODDVBTableINTNetwID | read-write | current | DVB Table INT Network ID. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.8 | Columnax60MODDVBTableINTPlatfID | read-write | current | DVB Table INT Platform ID. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.9 | Columnax60MODDVBTableProvName | read-write | current | DVB Table Provider Name. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.10 | Columnax60MODDVBTableServName | read-write | current | DVB Table Service Name. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.11 | Columnax60MODDVBTablePlatfName | read-write | current | DVB Table Platform Name. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.12 | Columnax60MODDVBTableOccupiedBandwidth | read-only | current | DVB Table Monitor Occupied Bandwidth in Mbps. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.13 | Columnax60MODDVBTablePATPeriod | read-write | current | DVB Table PAT Period in ms. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.14 | Columnax60MODDVBTablePMTPeriod | read-write | current | DVB Table PMT Period in ms. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.15 | Columnax60MODDVBTableCATPeriod | read-write | current | DVB Table CAT Period in ms. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.16 | Columnax60MODDVBTableNITPeriod | read-write | current | DVB Table NIT Period in ms. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.17 | Columnax60MODDVBTableSDTPeriod | read-write | current | DVB Table SDT Period in ms. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.18 | Columnax60MODDVBTableTDTPeriod | read-write | current | DVB Table TDT Period in ms. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.19 | Columnax60MODDVBTableEITPeriod | read-write | current | DVB Table EIT Period in ms. |
| 1.3.6.1.4.1.29890.1.8.1.1.34.1.20 | Columnax60MODDVBTableINTPeriod | read-write | current | DVB Table INT Period in ms. |
| 1.3.6.1.4.1.29890.1.8.1.1.35 | Scalarax60MODACMPort | read-write | current | Modulator ACM Port (needs OTMP license) |
| 1.3.6.1.4.1.29890.1.8.1.1.36 | Scalarax60MODACMMODCODSettingsEnabled | read-write | current | Whether the ACM MODCOD table is used or not (needs HUB license) |
| 1.3.6.1.4.1.29890.1.8.1.1.37 | Tableax60MODACMMODCODSettingsTable | not-accessible | current | Table for ACM MODCODs |
| 1.3.6.1.4.1.29890.1.8.1.1.37.1 | Rowax60MODACMMODCODSettingsTableEntry | not-accessible | current | An entry in the ACM MODCOD Table (Index correlates with MODCOD) |
| 1.3.6.1.4.1.29890.1.8.1.1.37.1.1 | Columnax60MODACMMODCODSettingsTableIndex | read-only | current | ACM MODCOD Table Index correlates with MODCOD |
| 1.3.6.1.4.1.29890.1.8.1.1.37.1.2 | Columnax60MODACMMODCODSettingsTableMODCODEnabled | read-write | current | Whether this MODCOD is used for ACM or not. |
| 1.3.6.1.4.1.29890.1.8.1.1.38 | Scalarax60MODACMMODCODAllOn | read-write | current | ACM MODCODs all on. |
| 1.3.6.1.4.1.29890.1.8.1.1.39 | Scalarax60MODACMMODCODAllOff | read-write | current | ACM MODCODs all off. |
| 1.3.6.1.4.1.29890.1.8.1.1.40 | Scalarax60MODACMMODCODAllToggle | read-write | current | ACM MODCODs all toggle. |
| 1.3.6.1.4.1.29890.1.8.1.1.41 | Scalarax60MODGlobalFlowControlOperation | read-write | current | Modulator Global Flow Control Operation |
| 1.3.6.1.4.1.29890.1.8.1.1.42 | Tableax60MODTimeSliceTable | not-accessible | current | Modulator Time Slice Table. Max. 256 entries. |
| 1.3.6.1.4.1.29890.1.8.1.1.42.1 | Rowax60MODTimeSliceTableEntry | not-accessible | current | Modulator Time Slice Table |
| 1.3.6.1.4.1.29890.1.8.1.1.42.1.1 | Columnax60MODTimeSliceIndex | read-only | current | Modulator Time Slice Table Index. |
| 1.3.6.1.4.1.29890.1.8.1.1.42.1.2 | Columnax60MODTimeSliceEnableSliceOperation | read-write | current | Modulator Time Slice Enable Operation. |
| 1.3.6.1.4.1.29890.1.8.1.1.42.1.3 | Columnax60MODTimeSliceNumber | read-write | current | Modulator Time Slice Number. |
| 1.3.6.1.4.1.29890.1.8.1.1.42.1.4 | Columnax60MODTimeSliceName | read-write | current | Modulator Time Slice Name. |
| 1.3.6.1.4.1.29890.1.8.1.1.42.1.5 | Columnax60MODTimeSliceGuardInterval | read-write | current | Modulator Time Slice Guard Interval. |
| 1.3.6.1.4.1.29890.1.8.1.1.42.1.6 | Columnax60MODTSliceFrameTransmissionTimeout | read-write | current | Modulator Time Slice Frame Transmission Timeout. |
| 1.3.6.1.4.1.29890.1.8.1.1.42.1.7 | Columnax60MODTSliceTrafficGenerator | read-write | current | Modulator Time Slice Traffic Generator. |
| 1.3.6.1.4.1.29890.1.8.1.1.42.1.8 | Columnax60MODTSliceTGMODCODScheme | read-only | current | Modulator Time Slice MODCOD scheme for ACM operation (dependent on MODCOD read-only) |
| 1.3.6.1.4.1.29890.1.8.1.1.42.1.9 | Columnax60MODTSliceTGMODCOD | read-write | current | Modulator Time Slice MODCOD for CCM operation |
| 1.3.6.1.4.1.29890.1.8.1.1.42.1.10 | Columnax60MODFlowControlOperation | read-write | current | Modulator Flow Control Operation. |
| 1.3.6.1.4.1.29890.1.8.1.1.42.1.11 | Columnax60MODControlPort | read-write | current | Modulator Control Port . |
| 1.3.6.1.4.1.29890.1.8.1.1.42.1.12 | Columnax60MODRepetitionTime | read-write | current | Modulator Repetition Time. |
| 1.3.6.1.4.1.29890.1.8.1.1.42.1.13 | Columnax60MODTimeSliceEnableSliceNCROperation | read-write | current | Modulator Time Slice Enable Operation. |
| 1.3.6.1.4.1.29890.1.8.1.1.43 | Scalarax60MODPPSClkInterruptEnable | read-write | current | Modulator PPS clock interrupt enable operation |
| 1.3.6.1.4.1.29890.1.8.1.1.44 | Scalarax60MODRefPPSAutocorrection | read-write | current | Modulator PPS auto correction (sync) on / off |
| 1.3.6.1.4.1.29890.1.8.1.1.45 | Scalarax60MODWaveform | read-write | current | Waveform |
| 1.3.6.1.4.1.29890.1.8.1.1.46 | Nodeax60MODCCSDS2310 | |||
| 1.3.6.1.4.1.29890.1.8.1.1.46.1 | Scalarax60MODCCSDS2310Modulation | read-write | current | Modulation |
| 1.3.6.1.4.1.29890.1.8.1.1.46.2 | Scalarax60MODCCSDS2310CodingMeth | read-write | current | Coding method |
| 1.3.6.1.4.1.29890.1.8.1.1.46.3 | Scalarax60MODCCSDS2310Plop | read-write | current | PLOP |
| 1.3.6.1.4.1.29890.1.8.1.1.46.4 | Scalarax60MODCCSDS2310AquiRange | read-write | current | Acquisition Sequence in bits |
| 1.3.6.1.4.1.29890.1.8.1.1.46.5 | Scalarax60MODCCSDS2310MaxCLTULen | read-write | current | Max CLTU Length in octects |
| 1.3.6.1.4.1.29890.1.8.1.1.46.6 | Scalarax60MODCCSDS2310RndmizerEn | read-write | current | Randomizer Enable |
| 1.3.6.1.4.1.29890.1.8.1.1.46.7 | Scalarax60MODCCSDS2310TrafficGen | read-write | current | Traffic Generator |
| 1.3.6.1.4.1.29890.1.8.1.1.47 | Scalarax60MODNCRTotalValue | read-write | current | Modulator NCR Total(Absolute) Value |
| 1.3.6.1.4.1.29890.1.8.1.1.48 | Scalarax60MODNCROffset | read-write | current | Modulator NCR Offset Value |
| 1.3.6.1.4.1.29890.1.8.1.1.49 | Scalarax60MODNCRFrameOperation | read-write | current | Modulator NCR Frame on / off |
| 1.3.6.1.4.1.29890.1.8.1.1.50 | Scalarax60MODNCRMODCODScheme | read-only | current | MOD Scheme of NCR Modcods (dependent on MODCOD read-only). |
| 1.3.6.1.4.1.29890.1.8.1.1.51 | Scalarax60MODNCRMODCOD | read-write | current | MOD NCR send Frmae ModCod |
| 1.3.6.1.4.1.29890.1.8.1.1.52 | Scalarax60MODNCRMethod | read-write | current | NCR insertion method |
| 1.3.6.1.4.1.29890.1.8.1.2 | Nodeax60DemodulatorConfig | |||
| 1.3.6.1.4.1.29890.1.8.1.2.1 | Scalarax60DMDRXFrequency | read-write | current | RX frequency in Hz. |
| 1.3.6.1.4.1.29890.1.8.1.2.3 | Scalarax60DMDSymbolRate | read-write | current | Symbol rate in sps. |
| 1.3.6.1.4.1.29890.1.8.1.2.5 | Scalarax60DMDPLScrambling | read-write | current | DVB-S2 PL Scrambling. |
| 1.3.6.1.4.1.29890.1.8.1.2.6 | Scalarax60DMDLNBPower | read-write | current | LNB power supply. |
| 1.3.6.1.4.1.29890.1.8.1.2.7 | Scalarax60DMDMultistream | read-write | current | Multistream on/off/timeslicing. |
| 1.3.6.1.4.1.29890.1.8.1.2.8 | Scalarax60DMDMultistreamISI | read-write | current | Multistream ISI. |
| 1.3.6.1.4.1.29890.1.8.1.2.9 | Nodeax60DMDACMController | |||
| 1.3.6.1.4.1.29890.1.8.1.2.9.1 | Scalarax60DMDACMControllerSendPort | read-write | current | Send ACM data via none / Ethernet / Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.2.9.2 | Scalarax60DMDACMControllerIPv4Address | read-write | current | IP Address ACM Master. |
| 1.3.6.1.4.1.29890.1.8.1.2.9.3 | Scalarax60DMDACMControllerDMDChannel | read-write | current | Demodulator Channel. |
| 1.3.6.1.4.1.29890.1.8.1.2.9.4 | Scalarax60DMDACMControllerResponseTime | read-write | current | Response time in 100ms. |
| 1.3.6.1.4.1.29890.1.8.1.2.9.5 | Scalarax60DMDACMControllerIPv6Address | read-write | current | IPv6 Address ACM Master. |
| 1.3.6.1.4.1.29890.1.8.1.2.9.6 | Scalarax60DMDACMPort | read-write | current | Demodulator ACM Port (needs OTMP license) |
| 1.3.6.1.4.1.29890.1.8.1.2.10 | Scalarax60DMDSatMACFilter | read-write | current | Sat MAC Filter. |
| 1.3.6.1.4.1.29890.1.8.1.2.11 | Scalarax60DMDRXProcessing | read-write | current | RX Processing (default: on). |
| 1.3.6.1.4.1.29890.1.8.1.2.12 | Scalarax60DMDRedundantSatMAC | read-write | current | Redundant Sat MAC. |
| 1.3.6.1.4.1.29890.1.8.1.2.13 | Nodeax60DMDSecondaryCarrier | |||
| 1.3.6.1.4.1.29890.1.8.1.2.13.1 | Scalarax60DMDSCOperation | read-write | current | Secondary Carrier Operation. |
| 1.3.6.1.4.1.29890.1.8.1.2.13.2 | Scalarax60DMDSCRXFrequency | read-write | current | Secondary Carrier RX Frequency in Hz. |
| 1.3.6.1.4.1.29890.1.8.1.2.13.4 | Scalarax60DMDSCSymbolrate | read-write | current | Secondary Carrier DMD Symbol Rate in sps. |
| 1.3.6.1.4.1.29890.1.8.1.2.13.6 | Scalarax60DMDSCPLScrambling | read-write | current | Secondary Carrier DMD PL Scrambling. |
| 1.3.6.1.4.1.29890.1.8.1.2.13.7 | Scalarax60DMDSCLNBPower | read-write | current | Secondary Carrier LNB Power Supply. |
| 1.3.6.1.4.1.29890.1.8.1.2.13.8 | Scalarax60DMDSCTimeout | read-write | current | Secondary Carrier Switching Timeout in s. |
| 1.3.6.1.4.1.29890.1.8.1.2.13.9 | Scalarax60DMDSCDVBMode | read-write | current | Secondary Carrier DVB Mode. |
| 1.3.6.1.4.1.29890.1.8.1.2.13.10 | Scalarax60DMDSCIFInputImpedance | read-write | current | Secondary Carrier IF Input Impedance. |
| 1.3.6.1.4.1.29890.1.8.1.2.13.11 | Scalarax60DMDSCRFSelection | read-write | current | Secondary RF Input, only applicable for S02367 device |
| 1.3.6.1.4.1.29890.1.8.1.2.14 | Nodeax60DMDStreamOutput | |||
| 1.3.6.1.4.1.29890.1.8.1.2.14.2 | Scalarax60DMDSOIPOutput | read-write | current | Stream Output: IP Output Protocol. |
| 1.3.6.1.4.1.29890.1.8.1.2.14.3 | Scalarax60DMDSOIPv4Destination | read-write | current | Stream Output: IPv4 Destination. |
| 1.3.6.1.4.1.29890.1.8.1.2.14.4 | Scalarax60DMDSOIPv6Destination | read-write | current | Stream Output: IPv6 Destination. |
| 1.3.6.1.4.1.29890.1.8.1.2.14.5 | Scalarax60DMDSOSourcePort | read-write | current | Stream Output: UDP Source Port. |
| 1.3.6.1.4.1.29890.1.8.1.2.14.6 | Scalarax60DMDSODestinationPort | read-write | current | Stream Output: UDP Destination Port. |
| 1.3.6.1.4.1.29890.1.8.1.2.14.7 | Scalarax60DMDSOBBFramePadding | read-write | current | Stream Output: BB Frame Padding. |
| 1.3.6.1.4.1.29890.1.8.1.2.14.8 | Scalarax60DMDSORTStreamformat | read-write | current | Stream Output RT: Stream Format. |
| 1.3.6.1.4.1.29890.1.8.1.2.14.9 | Scalarax60DMDSOStreamMode | read-write | current | Stream Output: Frame Mode. |
| 1.3.6.1.4.1.29890.1.8.1.2.14.10 | Scalarax60DMDIqDecimator | read-write | current | IQ Data Output: Decimator. |
| 1.3.6.1.4.1.29890.1.8.1.2.14.11 | Scalarax60DMDASIOutput | read-write | current | ASI Output: Operation. |
| 1.3.6.1.4.1.29890.1.8.1.2.15 | Nodeax60DMDClockSyncronization | |||
| 1.3.6.1.4.1.29890.1.8.1.2.15.1 | Scalarax60DMDCSTriggerMode | read-write | current | RT Clock Syncronization: Trigger Mode. |
| 1.3.6.1.4.1.29890.1.8.1.2.15.2 | Scalarax60DMDCSTermination | read-write | current | RT Clock Syncronization: Termination. |
| 1.3.6.1.4.1.29890.1.8.1.2.15.3 | Scalarax60DMDCSTriggerNow | read-write | current | RT Trigger Now. |
| 1.3.6.1.4.1.29890.1.8.1.2.16 | Scalarax60DMDDVBMode | read-write | current | Waveform |
| 1.3.6.1.4.1.29890.1.8.1.2.17 | Scalarax60DMDIFInputImpedance | read-write | current | IF Input Impedance. |
| 1.3.6.1.4.1.29890.1.8.1.2.18 | Nodeax60DMDMPE | |||
| 1.3.6.1.4.1.29890.1.8.1.2.18.1 | Scalarax60DMDMPEOperation | read-write | current | MPE Operation. |
| 1.3.6.1.4.1.29890.1.8.1.2.18.2 | Tableax60MPEPidTable | not-accessible | current | Table of MPE Pid's. Max. 16 entries. |
| 1.3.6.1.4.1.29890.1.8.1.2.18.2.1 | Rowax60MPEPidEntry | not-accessible | current | A Table of Saved Configurations. |
| 1.3.6.1.4.1.29890.1.8.1.2.18.2.1.1 | Columnax60MPEPidIndex | read-only | current | MPE Pid index. |
| 1.3.6.1.4.1.29890.1.8.1.2.18.2.1.2 | Columnax60MPEPid | read-write | current | MPE Pid. |
| 1.3.6.1.4.1.29890.1.8.1.2.19 | Scalarax60DMDDecaps | read-write | current | RX Processing (default: on). |
| 1.3.6.1.4.1.29890.1.8.1.2.20 | Nodeax60DMDCCSDS1310 | |||
| 1.3.6.1.4.1.29890.1.8.1.2.20.1 | Scalarax60DMDCCSDS1310Modulation | read-write | current | Modulation |
| 1.3.6.1.4.1.29890.1.8.1.2.20.2 | Scalarax60DMDCCSDS1310CodingMeth | read-write | current | Coding method |
| 1.3.6.1.4.1.29890.1.8.1.2.20.3 | Scalarax60DMDCCSDS1310ConvRate | read-write | current | Convolutional Rate |
| 1.3.6.1.4.1.29890.1.8.1.2.20.4 | Scalarax60DMDCCSDS1310RsRate | read-write | current | Reed-Solomon Rate |
| 1.3.6.1.4.1.29890.1.8.1.2.20.5 | Scalarax60DMDCCSDS1310Rsintlver | read-write | current | Reed-Solomon Interleaver Depth |
| 1.3.6.1.4.1.29890.1.8.1.2.20.6 | Scalarax60MODCCSDS1310RndmizerEn | read-write | current | Randomizer Enable |
| 1.3.6.1.4.1.29890.1.8.1.2.20.7 | Scalarax60DMDCCSDS1310TrfLen | read-write | current | Transfer Length in Bytes |
| 1.3.6.1.4.1.29890.1.8.1.2.20.8 | Scalarax60DMDCCSDS1310RsVirtFill | read-write | current | Reed-Solomon virtual fill in symbols |
| 1.3.6.1.4.1.29890.1.8.1.2.21 | Nodeax60DMDOPTCCSDS | |||
| 1.3.6.1.4.1.29890.1.8.1.2.21.1 | Scalarax60DMDOPTCCSDSInputSymbolRate | read-write | current | Input Symbolrate in Msps as index ( _ := decimal point ) |
| 1.3.6.1.4.1.29890.1.8.1.2.21.2 | Scalarax60DMDOPTCCSDSIntleaverDepth | read-write | current | Interleaver Depth |
| 1.3.6.1.4.1.29890.1.8.1.2.21.3 | Scalarax60DMDOPTCCSDSASMErrTolerance | read-write | current | ASM Error Tolerance in bit errors per 32bit ASM |
| 1.3.6.1.4.1.29890.1.8.1.2.21.4 | Scalarax60DMDOPTCCSDSAutoAcquisitionControl | read-write | current | Auto Acquisition Control |
| 1.3.6.1.4.1.29890.1.8.1.2.21.5 | Scalarax60DMDOPTCCSDSManualAcquisition | read-write | current | Manual Acquisition |
| 1.3.6.1.4.1.29890.1.8.1.2.21.6 | Scalarax60DMDOPTCCSDSToleranceAutoset | read-write | current | Auto calculation and application of tolerance settings |
| 1.3.6.1.4.1.29890.1.8.1.2.21.7 | Scalarax60DMDOPTCCSDSBitAlignerToleranceTime | read-write | current | Bit Aligner Time Tolerance in us |
| 1.3.6.1.4.1.29890.1.8.1.2.21.8 | Scalarax60DMDOPTCCSDSBitAlignerFailThld | read-write | current | Bit aligner failure rel. threashold in percent as index ( p := decimal point ) |
| 1.3.6.1.4.1.29890.1.8.1.2.21.9 | Scalarax60DMDOPTCCSDSRSDecodNoDataTimeTolerance | read-write | current | Reed-Solomon Decoder no data time tolerance |
| 1.3.6.1.4.1.29890.1.8.1.2.21.10 | Scalarax60DMDOPTCCSDSRSDecodNumCWFailTolerance | read-write | current | Reed-Solomon decoder number of Code Words failure tolerance |
| 1.3.6.1.4.1.29890.1.8.1.2.21.11 | Scalarax60DMDOPTCCSDSRSDecodFailThld | read-write | current | Reed-Solomon decoder failure rel. threashold in percent as index ( p := decimal point ) |
| 1.3.6.1.4.1.29890.1.8.1.2.21.12 | Scalarax60DMDOPTCCSDSOperationalMode | read-write | current | Operational Mode - normal, generators |
| 1.3.6.1.4.1.29890.1.8.1.2.21.13 | Scalarax60DMDOPTCCSDSTestGenCBPattern | read-write | current | Test Generator CB-Pattern |
| 1.3.6.1.4.1.29890.1.8.1.2.21.14 | Scalarax60DMDOPTCCSDSTXMuteTime | read-write | current | TX Mute time |
| 1.3.6.1.4.1.29890.1.8.1.2.21.15 | Scalarax60DMDOPTCCSDSTXMute | read-write | current | TX Mute trigger |
| 1.3.6.1.4.1.29890.1.8.1.2.21.16 | Scalarax60DMDOPTCCSDSGENReset | read-write | current | Generator reset |
| 1.3.6.1.4.1.29890.1.8.1.2.21.17 | Scalarax60DMDOPTCCSDSGenPRBSReset | read-write | current | Generator PRBS reset |
| 1.3.6.1.4.1.29890.1.8.1.2.21.100 | Nodeax60DMDOPTCCSDS142 | |||
| 1.3.6.1.4.1.29890.1.8.1.2.21.100.1 | Scalarax60DMDOPTCCSDS142SymbolRate | read-write | current | CCSDS142.0 Symbolrate in Msps as index ( _ := decimal point ) |
| 1.3.6.1.4.1.29890.1.8.1.2.21.100.2 | Scalarax60DMDOPTCCSDS142InterleaverRows | read-write | current | Nominal number of de-interleaver rows |
| 1.3.6.1.4.1.29890.1.8.1.2.21.100.3 | Scalarax60DMDOPTCCSDS142SyncLayerBlocks | read-write | current | Number of blocks in sync layer sub-frame |
| 1.3.6.1.4.1.29890.1.8.1.2.21.100.4 | Scalarax60DMDOPTCCSDS142InterleaverDepth | read-write | current | Symbol Interleaving Depth |
| 1.3.6.1.4.1.29890.1.8.1.2.21.100.5 | Scalarax60DMDOPTCCSDS142RepeatationFactor | read-write | current | TGen repetition configuration |
| 1.3.6.1.4.1.29890.1.8.1.2.21.100.6 | Scalarax60DMDOPTCCSDS142InterleaverBlockSize | read-write | current | De-interleaver block symbol size |
| 1.3.6.1.4.1.29890.1.8.1.2.21.100.7 | Scalarax60DMDOPTCCSDS142TFAdaptation | read-write | current | Transfer Frame Adaption enable |
| 1.3.6.1.4.1.29890.1.8.1.2.21.100.8 | Scalarax60DMDOPTCCSDS142IFSFieldCounter | read-write | current | IFS filed counter enable |
| 1.3.6.1.4.1.29890.1.8.1.2.21.100.9 | Scalarax60DMDOPTCCSDS142TFLength | read-write | current | Transfer frame length in bytes |
| 1.3.6.1.4.1.29890.1.8.1.2.21.100.10 | Scalarax60DMDOPTCCSDS142RowScalingFactor | read-write | current | Row-scaling factor |
| 1.3.6.1.4.1.29890.1.8.1.2.21.100.11 | Scalarax60DMDOPTCCSDS142TgenTestPattern | read-write | current | Test generator pattern |
| 1.3.6.1.4.1.29890.1.8.1.2.22 | Scalarax60DMDRFSelection | read-write | current | Primary RF Input, only applicable for S02367 device. |
| 1.3.6.1.4.1.29890.1.8.1.2.23 | Scalarax60DMDTimeSliceNumber | read-write | current | Time Slice Number. |
| 1.3.6.1.4.1.29890.1.8.1.2.24 | Nodeax60DMDCarrierSearch | |||
| 1.3.6.1.4.1.29890.1.8.1.2.24.1 | Scalarax60DMDCSMode | read-write | current | Carrier Search Mode. |
| 1.3.6.1.4.1.29890.1.8.1.2.24.2 | Scalarax60DMDCSFreqRange | read-write | current | Carrier Search Manual Frequency Range +/- in Hz. |
| 1.3.6.1.4.1.29890.1.8.1.3 | Nodeax60EthernetConfig | |||
| 1.3.6.1.4.1.29890.1.8.1.3.2 | Nodeax60EthInterfaceSetup | |||
| 1.3.6.1.4.1.29890.1.8.1.3.2.1 | Scalarax60EthInterfaceIPv4Address | read-write | current | Ethernet Interface IP Address. |
| 1.3.6.1.4.1.29890.1.8.1.3.2.2 | Scalarax60EthInterfaceNetmask | read-write | current | Ethernet Interface Netmask. |
| 1.3.6.1.4.1.29890.1.8.1.3.2.3 | Scalarax60EthInterfaceGateway | read-write | current | Ethernet Interface Gateway. |
| 1.3.6.1.4.1.29890.1.8.1.3.2.4 | Scalarax60EthInterfaceEthMAC | read-only | current | Ethernet Interface Ethernet MAC Address. |
| 1.3.6.1.4.1.29890.1.8.1.3.2.5 | Scalarax60EthInterfaceSatMAC | read-only | current | Ethernet Interface Satellite MAC Address. |
| 1.3.6.1.4.1.29890.1.8.1.3.2.8 | Scalarax60EthInterfaceIPv6Operation | read-write | current | IPv6 Operation. |
| 1.3.6.1.4.1.29890.1.8.1.3.2.9 | Scalarax60EthInterfaceIPv6Address | read-write | current | IPv6 Address (manual setting). |
| 1.3.6.1.4.1.29890.1.8.1.3.2.10 | Scalarax60EthInterfaceIPv6Prefix | read-write | current | IPv6 Prefix (manual setting). |
| 1.3.6.1.4.1.29890.1.8.1.3.2.11 | Scalarax60EthInterfaceIPv6Gateway | read-write | current | IPv6 Gateway (manual setting). |
| 1.3.6.1.4.1.29890.1.8.1.3.2.12 | Scalarax60EthInterfaceJumboFramesOperation | read-write | current | Jumbo Frames Operation. |
| 1.3.6.1.4.1.29890.1.8.1.3.2.13 | Scalarax60EthInterfacePromiscuousMode | read-write | current | Promiscuous Mode. |
| 1.3.6.1.4.1.29890.1.8.1.3.2.14 | Scalarax60EthInterfaceARPProxyMode | read-write | current | ARP Proxy Mode. |
| 1.3.6.1.4.1.29890.1.8.1.3.3 | Tableax60EthSatRoutesTable | not-accessible | current | A table of Satellite Routes. Max. 256 entries. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1 | Rowax60EthSatRoutesEntry | not-accessible | current | An entry in the Satellite Routes table. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.1 | Columnax60EthSatRouteIndex | read-only | current | Satellite Route Index. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.2 | Columnax60EthSatRouteTargetMAC | read-write | current | Satellite Route TargetMAC. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.3 | Columnax60EthSatRouteTargetIP | read-write | current | Satellite Route Target IP. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.4 | Columnax60EthSatRouteNetmask | read-write | current | Satellite Route Network Prefix. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.5 | Columnax60EthSatRouteBBChannel | read-write | current | Satellite Route BB Channel. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.6 | Columnax60EthSatRouteMPEPID | read-write | current | Satellite Route MPE PID. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.7 | Columnax60EthSatRouteCommit | read-write | current | Write any value to make last satroute changes persistent. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.8 | Columnax60EthSatRouteMACHandling | read-write | current | MAC Handling. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.9 | Columnax60EthSatRouteMACPrefix | read-write | current | MAC Prefix only activ if ax60EthSatRouteMACHandling = macprefix(1). |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.10 | Columnax60EthSatRouteOperation | read-write | current | Sat Route Operation. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.11 | Columnax60EthSatRouteName | read-write | current | Sat Route Name. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.12 | Columnax60EthSatRoutePriority | read-write | current | Ethernet Route Index. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.100 | Columnax60EthSatRouteDestIPOperation | read-write | current | Destination IP Operation. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.101 | Columnax60EthSatRouteDestIP | read-write | current | Destination IP. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.102 | Columnax60EthSatRouteDestPrefix | read-write | current | Destination IP Prefix. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.110 | Columnax60EthSatRouteSourceIPOperation | read-write | current | Source IP Operation. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.111 | Columnax60EthSatRouteSourceIP | read-write | current | Source IP. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.112 | Columnax60EthSatRouteSourcePrefix | read-write | current | Source IP Prefix. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.120 | Columnax60EthSatRouteDestMACOperation | read-write | current | Destination MAC Operation. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.121 | Columnax60EthSatRouteDestMAC | read-write | current | Destination MAC. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.122 | Columnax60EthSatRouteDestMask | read-write | current | Destination MAC Mask. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.130 | Columnax60EthSatRouteSourceMACOperation | read-write | current | Source MAC Operation. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.131 | Columnax60EthSatRouteSourceMAC | read-write | current | Source MAC. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.132 | Columnax60EthSatRouteSourceMask | read-write | current | Source MAC Mask. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.133 | Columnax60EthSatRouteARPProxyMode | read-write | current | ARP Proxy Mode for this satroute (needs license APRX). Non Persistent! |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.140 | Columnax60EthSatRouteMODCOD | read-write | current | MODCOD for VCM operation |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.141 | Columnax60EthSatRouteMODCODScheme | read-only | current | MODCOD scheme (dependent on MODCOD read-only) |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.142 | Columnax60EthSatRouteLevelOffset | read-write | current | Level Offset in 10th dB. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.143 | Columnax60EthSatRouteLevelHyst | read-write | current | Level Hysteresis in 10th dB. |
| 1.3.6.1.4.1.29890.1.8.1.3.3.1.599 | Columnax60EthSatRouteDelete | read-write | current | Write value 1 to delete this satellite route |
| 1.3.6.1.4.1.29890.1.8.1.3.4 | Tableax60EthEthRoutesTable | not-accessible | current | A table of Ethernet Routes. Max. 256 entries. |
| 1.3.6.1.4.1.29890.1.8.1.3.4.1 | Rowax60EthEthRoutesEntry | not-accessible | current | An entry in the Ethernet Routes table. |
| 1.3.6.1.4.1.29890.1.8.1.3.4.1.1 | Columnax60EthEthRouteIndex | read-only | current | Ethernet Route Index. |
| 1.3.6.1.4.1.29890.1.8.1.3.4.1.2 | Columnax60EthEthRouteTargetIP | read-write | current | Ethernet Route Target IP. |
| 1.3.6.1.4.1.29890.1.8.1.3.4.1.3 | Columnax60EthEthRouteNetmask | read-write | current | Ethernet Route Netmask. |
| 1.3.6.1.4.1.29890.1.8.1.3.4.1.4 | Columnax60EthEthRouteGateway | read-write | current | Ethernet Route Gateway. |
| 1.3.6.1.4.1.29890.1.8.1.3.4.1.99 | Columnax60EthEthRouteDelete | read-write | current | Write value 1 to delete this ethernet route |
| 1.3.6.1.4.1.29890.1.8.1.3.8 | Scalarax60EthTrfShapOperation | read-write | current | Enable/Disable Traffic Shaper 2. |
| 1.3.6.1.4.1.29890.1.8.1.3.9 | Tableax60EthTrfShapTable | not-accessible | current | A table of Traffic Shaper 2 Rules. Max. 64 entries. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1 | Rowax60EthTrfShapEntry | not-accessible | current | An entry in the Traffic Shaper 2 table. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.1 | Columnax60EthTrfShapIndex | read-only | current | Index in list of Traffic Shaper 2 Rules. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.2 | Columnax60EthTrfShapName | read-write | current | Name of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.3 | Columnax60EthTrfShapPrio | read-write | current | Priority of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.4 | Columnax60EthTrfShapProto | read-write | current | Protocol of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.5 | Columnax60EthTrfShapFrameSizeMin | read-write | current | Min. Frame Size of Traffic Shaping Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.6 | Columnax60EthTrfShapFrameSizeMax | read-write | current | Max. Frame Size of Traffic Shaping Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.7 | Columnax60EthTrfShapMatch | read-write | current | Matching Bitmask of Traffic Shaper 2 Rule. Bit map assignment of the matching criteria. A set bit enables the respective matching criteria: Bit 0: Source Port … |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.8 | Columnax60EthTrfShapSourceIP | read-write | current | Source IPv4 address of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.9 | Columnax60EthTrfShapSourceIPPrefix | read-write | current | Source IPv4 prefix of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.10 | Columnax60EthTrfShapSourceIPv6 | read-write | current | Source IPv6 address of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.11 | Columnax60EthTrfShapSourceIPv6Prefix | read-write | current | Source IPv6 prefix of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.12 | Columnax60EthTrfShapSourcePortMin | read-write | current | Min. Source Port of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.13 | Columnax60EthTrfShapSourcePortMax | read-write | current | Max. Source Port of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.14 | Columnax60EthTrfShapDestinationIP | read-write | current | Destination IPv4 address of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.15 | Columnax60EthTrfShapDestinationIPPrefix | read-write | current | Destination IPv4 prefix of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.16 | Columnax60EthTrfShapDestinationIPv6 | read-write | current | Destination IPv6 address of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.17 | Columnax60EthTrfShapDestinationIPv6Prefix | read-write | current | Destination IPv6 prefix of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.18 | Columnax60EthTrfShapDestinationPortMin | read-write | current | Min. Destination Port of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.19 | Columnax60EthTrfShapDestinationPortMax | read-write | current | Max. Destination Port of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.20 | Columnax60EthTrfShapSourceMAC | read-write | current | Source MAC of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.21 | Columnax60EthTrfShapMinTOS | read-write | current | Min. TOS value of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.22 | Columnax60EthTrfShapMaxTOS | read-write | current | Max. TOS value of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.23 | Columnax60EthTrfShapBWOperMin | read-write | current | Bandwidth Mode Operator Minimum of Traffic Shaper. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.24 | Columnax60EthTrfShapBWMin | read-write | current | Min. Bandwidth of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.25 | Columnax60EthTrfShapBWMax | read-write | current | Max. Bandwidth of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.26 | Columnax60EthTrfShapBWChannel | read-write | current | Channel of Traffic Shaper 2 Rule. All (-1) BBChannels (0-63) |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.27 | Columnax60EthTrfShapBWMODCOD | read-write | current | MODCOD of Traffic Shaper 2 Rule. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.28 | Columnax60EthTrfShapBWMODCODScheme | read-only | current | Scheme of Modcods of Traffic Shaper 2 Rule (dependent on MODCOD read-only). |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.29 | Columnax60EthTrfShapBWOperMax | read-write | current | Bandwidth Mode Operator Minimum of Traffic Shaper. |
| 1.3.6.1.4.1.29890.1.8.1.3.9.1.99 | Columnax60EthTrfShapDelete | read-write | current | Write value 1 to delete this IP Traffic Shaper Rule |
| 1.3.6.1.4.1.29890.1.8.1.3.10 | Nodeax60EthSatRoutesSetup | |||
| 1.3.6.1.4.1.29890.1.8.1.3.10.1 | Scalarax60EthSatRoutesOperation | read-write | current | Whether the route shall operate in CCM, VCM or ACM mode (needs HUB license) |
| 1.3.6.1.4.1.29890.1.8.1.3.10.2 | Scalarax60EthSatRoutesMODCODScheme | read-only | current | Satroutes MODCOD scheme for ACM operation (needs HUB license)(dependent on MODCOD read-only) |
| 1.3.6.1.4.1.29890.1.8.1.3.10.3 | Scalarax60EthSatRoutesMODCOD | read-write | current | Satroutes MODCOD for CCM operation (needs HUB license) |
| 1.3.6.1.4.1.29890.1.8.1.3.10.4 | Scalarax60EthSatRoutesPilots | read-write | current | Pilots for SatRoutes (needs HUB license) |
| 1.3.6.1.4.1.29890.1.8.1.3.10.5 | Scalarax60EthSatRoutesFrameTransmissionTimeout | read-write | current | Timeout in ms until a bb frame is sent even if not completly filled (needs HUB license) |
| 1.3.6.1.4.1.29890.1.8.1.3.10.6 | Scalarax60EthSatRoutesPacketReschedulingTimeout | read-write | current | Timeout in ms until packages are sent with a lower MODCOD (needs HUB license) |
| 1.3.6.1.4.1.29890.1.8.1.3.10.7 | Scalarax60EthSatTrafficGen | read-write | current | Traffic Generator Operation (needs HUB license) |
| 1.3.6.1.4.1.29890.1.8.1.3.10.8 | Scalarax60EthSatTrafficGenModcodScheme | read-only | current | Traffic Generator Scheme of Modcods (needs HUB license)(dependent on MODCOD read-only) |
| 1.3.6.1.4.1.29890.1.8.1.3.10.9 | Scalarax60EthSatTrafficGenModcod | read-write | current | Traffic Generator Modcods (needs HUB license) |
| 1.3.6.1.4.1.29890.1.8.1.3.10.10 | Scalarax60EthSatDVBTablesOperation | read-write | current | DVB Tables Operation (needs HUB license) |
| 1.3.6.1.4.1.29890.1.8.1.3.10.11 | Scalarax60EthSatDVBTablesPlatformname | read-write | current | DVB Tables Platformname (needs HUB license) |
| 1.3.6.1.4.1.29890.1.8.1.3.10.14 | Scalarax60EthSatDVBTableTSID | read-write | current | DVB Table TS ID (needs HUB license) |
| 1.3.6.1.4.1.29890.1.8.1.3.10.15 | Scalarax60EthSatDVBTableServiceID | read-write | current | DVB Table Service ID (needs HUB license) |
| 1.3.6.1.4.1.29890.1.8.1.3.10.16 | Scalarax60EthSatDVBTableOrigNetwID | read-write | current | DVB Table Original Network ID (needs HUB license) |
| 1.3.6.1.4.1.29890.1.8.1.3.10.17 | Scalarax60EthSatDVBTableINTNetwID | read-write | current | DVB Table INT Network ID (needs HUB license) |
| 1.3.6.1.4.1.29890.1.8.1.3.10.18 | Scalarax60EthSatDVBTableINTPlatfID | read-write | current | DVB Table INT Platform ID (needs HUB license) |
| 1.3.6.1.4.1.29890.1.8.1.3.10.26 | Scalarax60EthSatDVBTableNITPeriod | read-write | current | DVB Table NIT Period in ms (needs HUB license) |
| 1.3.6.1.4.1.29890.1.8.1.3.11 | Tableax60EthInterfacesSetupTable | not-accessible | current | A table of Ethernet Interface Setup. Max.2 entries. |
| 1.3.6.1.4.1.29890.1.8.1.3.11.1 | Rowax60EthInterfacesSetupEntry | not-accessible | current | An entry in the Ethernet interfaces Setup table. |
| 1.3.6.1.4.1.29890.1.8.1.3.11.1.1 | Columnax60EthInterfacesSetupIndex | read-only | current | Ethernet Route Index. |
| 1.3.6.1.4.1.29890.1.8.1.3.11.1.2 | Columnax60EthInterfacesIPv4Address | read-write | current | Ethernet Interfaces IP Address. |
| 1.3.6.1.4.1.29890.1.8.1.3.11.1.3 | Columnax60EthInterfacesNetmask | read-write | current | Ethernet Interfaces Netmask. |
| 1.3.6.1.4.1.29890.1.8.1.3.11.1.4 | Columnax60EthInterfacesGateway | read-write | current | Ethernet Interfaces Gateway. |
| 1.3.6.1.4.1.29890.1.8.1.3.11.1.5 | Columnax60EthInterfacesEthMAC | read-only | current | Ethernet Interfaces Ethernet MAC Address. |
| 1.3.6.1.4.1.29890.1.8.1.3.11.1.8 | Columnax60EthInterfacesSatMAC | read-only | current | Ethernet Interfaces Satellite MAC Address. |
| 1.3.6.1.4.1.29890.1.8.1.3.11.1.9 | Columnax60EthInterfacesIPv6Operation | read-write | current | IPv6 Operation. |
| 1.3.6.1.4.1.29890.1.8.1.3.11.1.10 | Columnax60EthInterfacesIPv6Address | read-write | current | IPv6 Address (manual setting). |
| 1.3.6.1.4.1.29890.1.8.1.3.11.1.11 | Columnax60EthInterfacesIPv6Prefix | read-write | current | IPv6 Prefix (manual setting). |
| 1.3.6.1.4.1.29890.1.8.1.3.11.1.12 | Columnax60EthInterfacesIPv6Gateway | read-write | current | IPv6 Gateway (manual setting). |
| 1.3.6.1.4.1.29890.1.8.1.3.11.1.13 | Columnax60EthInterfacesJumboFramesOperation | read-write | current | Jumbo Frames Operation. |
| 1.3.6.1.4.1.29890.1.8.1.3.11.1.14 | Columnax60EthInterfacesPromiscuousMode | read-write | current | Promiscuous Mode. |
| 1.3.6.1.4.1.29890.1.8.1.3.11.1.15 | Columnax60EthInterfacesARPProxyMode | read-write | current | ARP Proxy Mode. |
| 1.3.6.1.4.1.29890.1.8.1.3.12 | Scalarax60EthSatRouteTableUpdate | read-write | current | A trigger set to update ax60EthSatRouteTable after changing sat routes config. |
| 1.3.6.1.4.1.29890.1.8.1.4 | Nodeax60Monitor | |||
| 1.3.6.1.4.1.29890.1.8.1.4.1 | Nodeax60MonitorMOD | |||
| 1.3.6.1.4.1.29890.1.8.1.4.1.1 | Scalarax60MONMODIFSignalLevel | read-only | current | Modulator IF signal level (in 1/10 dBm). |
| 1.3.6.1.4.1.29890.1.8.1.4.1.2 | Scalarax60MONMODTuneVoltageLO | read-only | current | Local oscillator tune voltage (in 1/100V). |
| 1.3.6.1.4.1.29890.1.8.1.4.1.3 | Scalarax60MONMODTuneVoltageClock | read-only | current | Clock oscillator tune voltage (in 1/100V). |
| 1.3.6.1.4.1.29890.1.8.1.4.1.4 | Scalarax60MONMODInputFillLevel | read-only | current | Max. Input FIFO level (in 1/10%). |
| 1.3.6.1.4.1.29890.1.8.1.4.1.5 | Scalarax60MONMODBandwidth3dB | read-only | current | Bandwidth 3 dB (in kHz). |
| 1.3.6.1.4.1.29890.1.8.1.4.1.6 | Scalarax60MONMODBandwidth10dB | read-only | current | Bandwidth 10 dB (in kHz). |
| 1.3.6.1.4.1.29890.1.8.1.4.1.7 | Scalarax60MONMODBandwidth20dB | read-only | current | Bandwidth 20 dB (in kHz). |
| 1.3.6.1.4.1.29890.1.8.1.4.1.8 | Scalarax60MONMODModulatorDroppedFrames | read-only | current | Modulator dropped frames. |
| 1.3.6.1.4.1.29890.1.8.1.4.1.10 | Tableax60MONMODSTSTSoIPTable | not-accessible | current | Table Modulator Monitor Single TS Input, TSoIP. Max. 2 entries. |
| 1.3.6.1.4.1.29890.1.8.1.4.1.10.1 | Rowax60MONMODSTSTSoIPTableEntry | not-accessible | current | An entry in the Modulator Monitor Single TS Input, TSoIP Table. |
| 1.3.6.1.4.1.29890.1.8.1.4.1.10.1.1 | Columnax60MONMODSTSTSoIPIndex | read-only | current | Modulator Monitor Single TS Input, TSoIP Index. |
| 1.3.6.1.4.1.29890.1.8.1.4.1.10.1.2 | Columnax60MONMODSTSTSoIPFullDataRate | read-only | current | Modulator Monitor Single TS Input, TSoIP Full Data Rate in Mbps. |
| 1.3.6.1.4.1.29890.1.8.1.4.1.10.1.3 | Columnax60MONMODSTSTSoIPUserDataRate | read-only | current | Modulator Monitor Single TS Input User, TSoIP Data Rate in Mbps. |
| 1.3.6.1.4.1.29890.1.8.1.4.1.10.1.4 | Columnax60MONMODSTSTSoIPOperation | read-only | current | Modulator Monitor TSoIP Active/Inactive (active(1) / inactive(0)) |
| 1.3.6.1.4.1.29890.1.8.1.4.1.11 | Scalarax60MONMODSTSActiveTSoIP | read-only | current | Modulator Monitor Single TS Input Active TSoIP (1,2) from INF1 and (3,4) from INF2(Only availabe on 92107-112). |
| 1.3.6.1.4.1.29890.1.8.1.4.1.12 | Tableax60MONMODSTSTSInputTable | not-accessible | current | Table Modulator Monitor Single TS Input, TS Input. Max. 2 entries. |
| 1.3.6.1.4.1.29890.1.8.1.4.1.12.1 | Rowax60MONMODSTSTSInputTableEntry | not-accessible | current | An entry in the Modulator Monitor Single TS Input, TS Input Table. |
| 1.3.6.1.4.1.29890.1.8.1.4.1.12.1.1 | Columnax60MONMODSTSTSInputIndex | read-only | current | Modulator Monitor Single TS Input, TS Input Index. |
| 1.3.6.1.4.1.29890.1.8.1.4.1.12.1.2 | Columnax60MONMODSTSTSInputFullDataRate | read-only | current | Modulator Monitor Single TS Input, TS Input Full Data Rate in Mbps. |
| 1.3.6.1.4.1.29890.1.8.1.4.1.12.1.3 | Columnax60MONMODSTSTSInputUserDataRate | read-only | current | Modulator Monitor Single TS Input, TS Input User Data Rate in Mbps. |
| 1.3.6.1.4.1.29890.1.8.1.4.1.13 | Scalarax60MONMODSTSActiveTS | read-only | current | Modulator Monitor Single TS Input Active TS. |
| 1.3.6.1.4.1.29890.1.8.1.4.1.14 | Scalarax60MONMODResetCounters | read-write | current | Reset Throughput entries to zero. |
| 1.3.6.1.4.1.29890.1.8.1.4.1.15 | Scalarax60MONMOD10MHzRefInputClockSelected | read-only | current | 10MHz Ref.Input Clock Selected. |
| 1.3.6.1.4.1.29890.1.8.1.4.1.16 | Scalarax60MONMOD10MHzRefInputStatus | read-only | current | 10MHz Ref.Input Status. |
| 1.3.6.1.4.1.29890.1.8.1.4.1.17 | Scalarax60MONMODSTSFirstBufMin | read-only | current | Minimum Filllevel of First Single TS Buffer |
| 1.3.6.1.4.1.29890.1.8.1.4.1.18 | Scalarax60MONMODSTSFirstBufCur | read-only | current | Current Filllevel of First Single TS Buffer |
| 1.3.6.1.4.1.29890.1.8.1.4.1.19 | Scalarax60MONMODSTSFirstBufMax | read-only | current | Maximum Filllevel of First Single TS Buffer |
| 1.3.6.1.4.1.29890.1.8.1.4.1.20 | Scalarax60MONMODSTSSecondBufMin | read-only | current | Minimum Filllevel of Second Single TS Buffer |
| 1.3.6.1.4.1.29890.1.8.1.4.1.21 | Scalarax60MONMODSTSSecondBufCur | read-only | current | Current Filllevel of Second Single TS Buffer |
| 1.3.6.1.4.1.29890.1.8.1.4.1.22 | Scalarax60MONMODSTSSecondBufMax | read-only | current | Maximum Filllevel of Second Single TS Buffer |
| 1.3.6.1.4.1.29890.1.8.1.4.1.23 | Scalarax60MONMODSRSequenceNumber | read-only | current | Current RTP Sequence Number of Seamless Reconstruction |
| 1.3.6.1.4.1.29890.1.8.1.4.1.24 | Scalarax60MONMODSRStreamDifferencePkt | read-only | current | RTP Sequence Number Difference of both streams in packets |
| 1.3.6.1.4.1.29890.1.8.1.4.1.25 | Scalarax60MONMODSRStreamDifferenceMs | read-only | current | RTP Sequence Number Difference of both streams in milliseconds |
| 1.3.6.1.4.1.29890.1.8.1.4.1.26 | Scalarax60MONMODSRRedudancyState | read-only | current | Current Redundancy State of Seamless Reconstruction |
| 1.3.6.1.4.1.29890.1.8.1.4.1.27 | Scalarax60MONMODSRStreamDifferencePktAB | read-only | current | RTP Sequence Number Difference of streams A and B in packets |
| 1.3.6.1.4.1.29890.1.8.1.4.1.28 | Scalarax60MONMODSRStreamDifferenceMsAB | read-only | current | RTP Sequence Number Difference of streams A and B in milliseconds |
| 1.3.6.1.4.1.29890.1.8.1.4.1.29 | Scalarax60MONMODSRRedudancyStateAB | read-only | current | Current Redundancy State of Seamless Reconstruction of Streams A and B |
| 1.3.6.1.4.1.29890.1.8.1.4.1.30 | Scalarax60MONMODSRStreamDifferencePktCD | read-only | current | RTP Sequence Number Difference of streams C and D in packets |
| 1.3.6.1.4.1.29890.1.8.1.4.1.31 | Scalarax60MONMODSRStreamDifferenceMsCD | read-only | current | RTP Sequence Number Difference of streams C and D in milliseconds |
| 1.3.6.1.4.1.29890.1.8.1.4.1.32 | Scalarax60MONMODSRRedudancyStateCD | read-only | current | Current Redundancy State of Seamless Reconstruction of Streams C and D |
| 1.3.6.1.4.1.29890.1.8.1.4.1.33 | Scalarax60MONMODSRStreamDifferencePktCombined | read-only | current | RTP Sequence Number Difference of Final Combined Seamless Reconstruction in packets |
| 1.3.6.1.4.1.29890.1.8.1.4.1.34 | Scalarax60MONMODSRStreamDifferenceMsCombined | read-only | current | RTP Sequence Number Difference of Final Combined Seamless Reconstruction in milliseconds |
| 1.3.6.1.4.1.29890.1.8.1.4.1.35 | Scalarax60MONMODSRRedudancyStateCombined | read-only | current | Current Redundancy State of Final Combined Seamless Reconstruction |
| 1.3.6.1.4.1.29890.1.8.1.4.2 | Nodeax60MonitorDMD | |||
| 1.3.6.1.4.1.29890.1.8.1.4.2.1 | Scalarax60MONDMDLock | read-only | current | Demodulator Lock State: none / signal lock / full lock. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.2 | Scalarax60MONDMDModulationFEC | read-only | current | DVB-S2/DVB-S2X Mode Demodulator Modulation / FEC Rate. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.3 | Scalarax60MONDMDPilots | read-only | current | DVB-S2/DVB-S2X Mode Demodulator DVB-S2 Pilots. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.5 | Scalarax60MONDMDCoding | read-only | current | Demodulator Coding/Modulation: ACM / CCM. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.6 | Scalarax60MONDMDRollOff | read-only | current | Demodulator detected roll-off. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.7 | Scalarax60MONDMDSpectrumInversion | read-only | current | Demodulator spectrum inversion. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.8 | Scalarax60MONDMDInputLevel | read-only | current | Demodulator RF Input Level in 10th dBm. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.9 | Scalarax60MONDMDEsN0 | read-only | current | Demodulator Es/N0 in 10th dB. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.10 | Scalarax60MONDMDFrequencyOffset | read-only | current | Demodulator Carrier Frequency Offset in Hz. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.11 | Scalarax60MONDMDSymbolRateOffset | read-only | current | Demodulator Symbol Rate Offset in ppm. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.12 | Scalarax60MONDMDLockLosses | read-only | current | Demodulator Lock Losses. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.14 | Scalarax60MONDMDResetErrors | read-write | current | Reset all error counters. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.15 | Scalarax60MONDMDDatarate | read-only | current | Demodulator Data Rate in bps. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.16 | Scalarax60MONDMDEbN0 | read-only | current | Demodulator Eb/N0 in 10th dB. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.17 | Scalarax60MONDMDSC | read-only | current | Demodulator Second Carrier State. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.19 | Scalarax60MONDMDBBFrameLosses | read-only | current | DVB-S2/DVB-S2X Mode Demodulator BB Frame Losses. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.20 | Scalarax60EsN0ModulatedFrame | read-only | current | Es/N0 (modulated frame) in 10th dB. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.22 | Scalarax60MONDMDCurrentTimestamp | read-only | current | Demodulator Option RT Current Timestamp. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.23 | Scalarax60MONDMDCommunication | read-only | current | Demodulator Option RT Communication. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.24 | Scalarax60MONDMDOven | read-only | current | Demodulator Option RT Oven. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.25 | Scalarax60MONDMDPLL | read-only | current | Demodulator Option RT PLL. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.26 | Scalarax60MONDMDExternalReference | read-only | current | Demodulator Option RT External Reference. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.27 | Scalarax60MONDMDLNBvoltage | read-only | current | Demodulator LNB Voltage. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.28 | Scalarax60MONDMDLNBcurrent | read-only | current | Demodulator LNB Current. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.29 | Scalarax60MONDMDXMonLdpcErrorCounter | read-only | current | Extended Monitoring LDCP Error Counter. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.30 | Scalarax60MONDMDXMonEvm | read-only | current | Extended Monitoring EVM. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.31 | Scalarax60MONDMDModulationFECDVBSMode | read-only | current | DVB-S Mode Demodulator Modulation / FEC Rate. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.32 | Scalarax60MONDMDExtLockStat | read-only | current | Extended Lock Status as decimal value. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.33 | Scalarax60MONDMDModcodMargin | read-only | current | MODCOD Margin. in 10th dB. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.50 | Tableax60MONDMDModcodCounterTable | not-accessible | current | A table of Modcods. Max. 255 entries. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.50.1 | Rowax60MONDMDModcodCounterEntry | not-accessible | current | An entry in the Modcods counter table. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.50.1.1 | Columnax60MONDMDEntryModcod | read-only | current | Modcod entry index. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.50.1.2 | Columnax60MONDMDEntryModcodCounter | read-only | current | Modcod counter. |
| 1.3.6.1.4.1.29890.1.8.1.4.2.51 | Nodeax60MONDMDOPTCCSDS | |||
| 1.3.6.1.4.1.29890.1.8.1.4.2.51.1 | Scalarax60MONDMDOPTCCSDSBitAlignment | read-only | current | Bit Alignment status |
| 1.3.6.1.4.1.29890.1.8.1.4.2.51.2 | Scalarax60MONDMDOPTCCSDSASMSync | read-only | current | ASM Synchronisation status |
| 1.3.6.1.4.1.29890.1.8.1.4.2.51.3 | Scalarax60MONDMDOPTCCSDSASMRate | read-only | current | ASM rate in 1/s |
| 1.3.6.1.4.1.29890.1.8.1.4.2.51.4 | Scalarax60MONDMDOPTCCSDSDecodCBRate | read-only | current | Decoder Code Block Rate in 1/s |
| 1.3.6.1.4.1.29890.1.8.1.4.2.51.5 | Scalarax60MONDMDOPTCCSDSDecodCWRate | read-only | current | Decoder Code Word rate in 1/s |
| 1.3.6.1.4.1.29890.1.8.1.4.2.51.6 | Scalarax60MONDMDOPTCCSDSAcqtriggers | read-only | current | Acquisition Triggers - all sources |
| 1.3.6.1.4.1.29890.1.8.1.4.2.51.7 | Scalarax60MONDMDOPTCCSDSAcqRX | read-only | current | Acquisition Triggers - RX Re-Acquisition |
| 1.3.6.1.4.1.29890.1.8.1.4.2.51.8 | Scalarax60MONDMDOPTCCSDSAcqManual | read-only | current | Acquisition Triggers - Manual Triggered |
| 1.3.6.1.4.1.29890.1.8.1.4.2.51.9 | Scalarax60MONDMDOPTCCSDSAcqBitAligner | read-only | current | Acquisition Triggers - Bit Aligner |
| 1.3.6.1.4.1.29890.1.8.1.4.2.51.10 | Scalarax60MONDMDOPTCCSDSLockLosses | read-only | current | Lock Losses |
| 1.3.6.1.4.1.29890.1.8.1.4.2.51.11 | Scalarax60MONDMDOPTCCSDSBBFrameLosses | read-only | current | Baseband Frame Losses |
| 1.3.6.1.4.1.29890.1.8.1.4.2.51.12 | Scalarax60MONDMDOPTCCSDSRSCWErrors | read-only | current | Reed-Solomon Code Word errors |
| 1.3.6.1.4.1.29890.1.8.1.4.2.51.13 | Scalarax60MONDMDOPTCCSDSRSCWSymCorrected | read-only | current | Reed-Solomon corrected symbols |
| 1.3.6.1.4.1.29890.1.8.1.4.2.51.14 | Scalarax60MONDMDOPTCCSDSExtPhyStatus | read-only | current | Extended PHY status |
| 1.3.6.1.4.1.29890.1.8.1.4.2.51.15 | Scalarax60MONDMDOPTCCSDSASMStatus | read-only | current | Extended ASM status |
| 1.3.6.1.4.1.29890.1.8.1.4.2.51.16 | Scalarax60MONDMDOPTCCSDSASMSearchMinBERs | read-only | current | ASM Search min. bit errors in 1/s |
| 1.3.6.1.4.1.29890.1.8.1.4.2.51.17 | Scalarax60MONDMDOPTCCSDSASMSearchMinBERsNext | read-only | current | ASM Search next min. bit errors in 1/s |
| 1.3.6.1.4.1.29890.1.8.1.4.2.51.18 | Scalarax60MONDMDOPTCCSDSPRBSBER | read-only | current | PRBS bit error rate in 1/s |
| 1.3.6.1.4.1.29890.1.8.1.4.3 | Nodeax60MonitorTemperatures | |||
| 1.3.6.1.4.1.29890.1.8.1.4.3.1 | Scalarax60TemperatureDevice | read-only | current | Frontpanel temperature in C in 1 / 1000. |
| 1.3.6.1.4.1.29890.1.8.1.4.3.2 | Scalarax60TemperatureModulatorBoard | read-only | current | Modulator module temperature in C in 1 / 1000. |
| 1.3.6.1.4.1.29890.1.8.1.4.3.3 | Scalarax60TemperatureModulatorChip | read-only | current | Modulator chip temperature in C in 1 / 1000. |
| 1.3.6.1.4.1.29890.1.8.1.4.3.4 | Scalarax60TemperatureCPUBoard | read-only | current | Mainboard temperature in C in 1 / 1000. |
| 1.3.6.1.4.1.29890.1.8.1.4.3.5 | Scalarax60TemperatureCPUChip | read-only | current | Mainboard CPU temperature in C in 1 / 1000. |
| 1.3.6.1.4.1.29890.1.8.1.4.3.7 | Scalarax60TemperatureBridgeBoard | read-only | current | Bridge board temperature in C in 1 / 1000. |
| 1.3.6.1.4.1.29890.1.8.1.4.3.8 | Scalarax60TemperatureBridgeChip | read-only | current | Bridge chip temperature in C in 1 / 1000. |
| 1.3.6.1.4.1.29890.1.8.1.4.3.9 | Scalarax60TemperatureDemodulatorBoard | read-only | current | Demodulator module temperature in C in 1 / 1000. |
| 1.3.6.1.4.1.29890.1.8.1.4.3.10 | Scalarax60TemperatureDemodulatorChip | read-only | current | Demodulator Chip temperature in C in 1 / 1000. |
| 1.3.6.1.4.1.29890.1.8.1.4.3.11 | Scalarax60TemperatureDemodulatorChip2 | read-only | current | Demodulator Chip2 temperature in C in 1 / 1000. |
| 1.3.6.1.4.1.29890.1.8.1.4.3.12 | Scalarax60TemperatureDemodulatorOCXO | read-only | current | Demodulator OCXO temperature in C in 1 / 100. |
| 1.3.6.1.4.1.29890.1.8.1.4.5 | Nodeax60MonitorACM | |||
| 1.3.6.1.4.1.29890.1.8.1.4.5.1 | Tableax60MONACMTable | not-accessible | current | A table of ACM Channels. Max. 64 entries. |
| 1.3.6.1.4.1.29890.1.8.1.4.5.1.1 | Rowax60MONACMEntry | not-accessible | current | An entry in the ACM Channel table. |
| 1.3.6.1.4.1.29890.1.8.1.4.5.1.1.1 | Columnax60MONACMEntryBBChannel | read-only | current | BB Channel index. |
| 1.3.6.1.4.1.29890.1.8.1.4.5.1.1.2 | Columnax60MONACMEntryModcod | read-only | current | Modcod. |
| 1.3.6.1.4.1.29890.1.8.1.4.5.1.1.4 | Columnax60MONACMEntryOperation | read-only | current | Channel Operation. |
| 1.3.6.1.4.1.29890.1.8.1.4.5.1.1.5 | Columnax60MONACMEntryEsNo | read-only | current | Es/N0 in 1/10 dB. |
| 1.3.6.1.4.1.29890.1.8.1.4.5.1.1.6 | Columnax60MONACMEntryMAC | read-only | current | MAC Address. |
| 1.3.6.1.4.1.29890.1.8.1.4.6 | Nodeax60MonitorInterfaces | |||
| 1.3.6.1.4.1.29890.1.8.1.4.6.1 | Scalarax60MONInterfaceEthMAC | read-only | current | Ethernet Interface Ethernet MAC Address. |
| 1.3.6.1.4.1.29890.1.8.1.4.6.2 | Scalarax60MONInterfaceSatMAC | read-only | current | Ethernet Interface Satellite MAC Address. |
| 1.3.6.1.4.1.29890.1.8.1.4.6.3 | Scalarax60MONInterfaceEth2MAC | read-only | current | Ethernet Interface Ethernet 2 MAC Address. |
| 1.3.6.1.4.1.29890.1.8.1.4.9 | Nodeax60MonitorTraffic | |||
| 1.3.6.1.4.1.29890.1.8.1.4.9.1 | Nodeax60MonitorTrafficSat | |||
| 1.3.6.1.4.1.29890.1.8.1.4.9.1.3 | Scalarax60MONTrfSatTxFrames | read-only | current | Transmitted Frames via Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.1.4 | Scalarax60MONTrfSatTxBytes | read-only | current | Transmitted Bytes via Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.1.6 | Scalarax60MONTrfSatTxFramesAccu | read-only | current | Transmitted Frames via Satellite, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.1.7 | Scalarax60MONTrfSatRxBBBytes | read-only | current | Received BB Bytes via Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.1.8 | Scalarax60MONTrfSatRxBBFrames | read-only | current | Received BB Frames via Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.1.9 | Scalarax60MONTrfSatRxBBFramesAccu | read-only | current | Received BB Frames via Satellite, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.1.10 | Scalarax60MONTrfSatRxIQBytes | read-only | current | Received IQ Bytes via Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.1.11 | Scalarax60MONTrfSatRxIQFrames | read-only | current | Received IQ Frames via Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.1.12 | Scalarax60MONTrfSatRxIQFramesAccu | read-only | current | Received IQ Frames via Satellite, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.1.13 | Scalarax60MONTrfSatRxFeedbackFrames | read-only | current | Received Feedback Frames via Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.1.14 | Scalarax60MONTrfSatRxFeedbackFramesAccu | read-only | current | Received Feedback Frames via Satellite, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.1.15 | Scalarax60MONTrfSatRxSumBytes | read-only | current | Received Bytes via Satellite, summe of all. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.1.16 | Scalarax60MONTrfSatRxSumFrames | read-only | current | Received Frames via Satellite, summe of all. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.1.17 | Scalarax60MONTrfSatRxSumFramesAccu | read-only | current | Received Frames via Satellite, accumulated, summe of all. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.1.18 | Scalarax60MONTrfSatRxTSBytes | read-only | current | Received TS Bytes via Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.1.19 | Scalarax60MONTrfSatRxTSFrames | read-only | current | Received TS Frames via Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.1.20 | Scalarax60MONTrfSatRxTSFramesAccu | read-only | current | Received TS Frames via Satellite, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.2 | Nodeax60MonitorTrafficEth | |||
| 1.3.6.1.4.1.29890.1.8.1.4.9.2.1 | Scalarax60MONTrfEthRxFrames | read-only | current | Received Frames via Ethernet. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.2.2 | Scalarax60MONTrfEthRxBytes | read-only | current | Received Bytes via Ethernet. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.2.3 | Scalarax60MONTrfEthTxFrames | read-only | current | Transmitted Frames via Ethernet. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.2.4 | Scalarax60MONTrfEthTxBytes | read-only | current | Transmitted Bytes via Ethernet. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.2.5 | Scalarax60MONTrfEthTxDrop | read-only | current | Dropped Transmit Frames via Ethernet. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.2.6 | Scalarax60MONTrfEthRxFramesAccu | read-only | current | Received Frames via Ethernet, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.2.7 | Scalarax60MONTrfEthTxFramesAccu | read-only | current | Transmitted Frames via Ethernet, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.2.8 | Scalarax60MONTrfEthTxDropAccu | read-only | current | Dropped Transmit Frames via Ethernet, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3 | Nodeax60MonitorTrafficEnc | |||
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.1 | Tableax60MonitorTrafficEncTable | not-accessible | current | Encapsulator Monitor Table. Max. 16 BB channel entries. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.1.1 | Rowax60MonitorTrafficEncEntry | not-accessible | current | An entry in the Encapsulator Monitor Table. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.1.1.1 | Columnax60MONTrfEncEntryBBChannel | read-only | current | BB Channel index. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.1.1.2 | Columnax60MONTrfEncRxFrames | read-only | current | Received Frames in Encapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.1.1.3 | Columnax60MONTrfEncRxBytes | read-only | current | Received BYTES in Encapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.1.1.4 | Columnax60MONTrfEncRxDrop | read-only | current | Dropped Receive Frames in Encapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.1.1.5 | Columnax60MONTrfEncTxFrames | read-only | current | Transmitted Frames in Encapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.1.1.6 | Columnax60MONTrfEncTxBytes | read-only | current | Transmitted Bytes in Encapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.1.1.7 | Columnax60MONTrfEncTxUsed | read-only | current | Used Bandwidth in Encapsulator (in bytes/s). |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.1.1.8 | Columnax60MONTrfEncTxSymbols | read-only | current | Used Bandwidth in Encapsulator (in symbols/s). |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.1.1.9 | Columnax60MONTrfEncRxAccu | read-only | current | Received Frames in Encapsulator, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.1.1.10 | Columnax60MONTrfEncRxDropAccu | read-only | current | Dropped Receive Frames in Encapsulator, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.1.1.11 | Columnax60MONTrfEncTxAccu | read-only | current | Transmitted Frames in Encapsulator, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.2 | Scalarax60MONTrfEncRxFramesSum | read-only | current | Received Frames in Encapsulator, sum of all channels. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.4 | Scalarax60MONTrfEncRxDropSum | read-only | current | Dropped Receive Frames in Encapsulator, sum of all channels. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.5 | Scalarax60MONTrfEncTxFramesSum | read-only | current | Transmitted Frames in Encapsulator, sum of all channels. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.6 | Scalarax60MONTrfEncTxBytesSum | read-only | current | Transmitted Bytes in Encapsulator, sum of all channels. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.7 | Scalarax60MONTrfEncTxUsedSum | read-only | current | Used Bandwidth in Encapsulator (in bytes/s), sum of all channels. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.8 | Scalarax60MONTrfEncTxSymbolsSum | read-only | current | Used Bandwidth in Encapsulator (in symbols/s), sum of all channels. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.9 | Scalarax60MONTrfEncRxAccuSum | read-only | current | Received Frames in Encapsulator, accumulated, sum of all channels. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.10 | Scalarax60MONTrfEncRxDropAccuSum | read-only | current | Dropped Receive Frames in Encapsulator, accumulated, sum of all channels. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.3.11 | Scalarax60MONTrfEncTxAccuSum | read-only | current | Transmitted Frames in Encapsulator, accumulated, sum of all channels. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.4 | Nodeax60MonitorTrafficDec | |||
| 1.3.6.1.4.1.29890.1.8.1.4.9.4.1 | Scalarax60MONTrfDecRxFrames | read-only | current | Received Frames in Decapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.4.2 | Scalarax60MONTrfDecRxBytes | read-only | current | Received Bytes in Decapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.4.3 | Scalarax60MONTrfDecTxFrames | read-only | current | Transmitted Frames in Decapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.4.4 | Scalarax60MONTrfDecTxBytes | read-only | current | Transmitted Bytes in Decapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.4.5 | Scalarax60MONTrfDecTxUnfrag | read-only | current | Transmitted Full Frames in Decapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.4.6 | Scalarax60MONTrfDecTxFrag | read-only | current | Transmitted Fragmented Frames in Decapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.4.7 | Scalarax60MONTrfDecTxFragFrags | read-only | current | Transmitted Frame Fragments in Decapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.4.8 | Scalarax60MONTrfDecTxDrop | read-only | current | Dropped Transmit Frames in Decapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.4.9 | Scalarax60MONTrfDecRxAccu | read-only | current | Received Frames in Decapsulator, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.4.10 | Scalarax60MONTrfDecTxUnfragAccu | read-only | current | Transmitted Full Frames in Decapsulator, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.4.11 | Scalarax60MONTrfDecTxFragAccu | read-only | current | Transmitted Fragmented Frames in Decapsulator, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.4.12 | Scalarax60MONTrfDecTxDropAccu | read-only | current | Dropped Transmit Frames in Decapsulator, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.4.13 | Scalarax60MONTrfDecTxAccu | read-only | current | Transmit Frames in Decapsulator, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5 | Nodeax60MonitorTrafficProc | |||
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.1 | Scalarax60MONTrfProcFrames | read-only | current | Processed Frames. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.2 | Scalarax60MONTrfProcBytes | read-only | current | Processed Bytes. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.3 | Scalarax60MONTrfProcSatIPv4Frames | read-only | current | Processed Satellite IPv4 Frames. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.4 | Scalarax60MONTrfProcSatIPv6Frames | read-only | current | Processed Satellite IPv6 Frames. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.5 | Scalarax60MONTrfProcEthIPv4Frames | read-only | current | Processed Ethernet IPv4 Frames. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.6 | Scalarax60MONTrfProcEthIPv6Frames | read-only | current | Processed Ethernet IPv6 Frames. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.7 | Scalarax60MONTrfProcTtlDrop | read-only | current | Dropped TTL Frames. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.8 | Scalarax60MONTrfProcNorouteDrop | read-only | current | Dropped Unrouted Frames. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.9 | Scalarax60MONTrfProcTsDrop | read-only | current | Frames Dropped by IP Traffic Shaper. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.10 | Scalarax60MONTrfProcAccu | read-only | current | Processed Frames, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.11 | Scalarax60MONTrfProcSatIPv4Accu | read-only | current | Processed Satellite IPv4 Frames, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.12 | Scalarax60MONTrfProcSatIPv6Accu | read-only | current | Processed Satellite IPv6 Frames, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.13 | Scalarax60MONTrfProcEthIPv4Accu | read-only | current | Processed Ethernet IPv4 Frames, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.14 | Scalarax60MONTrfProcEthIPv6Accu | read-only | current | Processed Ethernet IPv6 Frames, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.15 | Scalarax60MONTrfProcTtlDropAccu | read-only | current | Dropped TTL Frames, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.16 | Scalarax60MONTrfProcNorouteDropAccu | read-only | current | Dropped Unrouted Frames, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.17 | Scalarax60MONTrfProcTsDropAccu | read-only | current | Frames dropped by IP Traffic Shaper, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.18 | Scalarax60MONTrfProcTotalDrop | read-only | current | Frames dropped total. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.19 | Scalarax60MONTrfProcTotalDropAccu | read-only | current | Frames dropped total, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.20 | Scalarax60MONTrfProcLicenseDrop | read-only | current | Frames dropped because of License restrictions. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.5.21 | Scalarax60MONTrfProcLicenseDropAccu | read-only | current | Frames dropped because of License restrictions, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.6 | Nodeax60MonitorTrafficDev | |||
| 1.3.6.1.4.1.29890.1.8.1.4.9.6.1 | Scalarax60MONTrfDevEthFrames | read-only | current | Ethernet Frames for Device. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.6.2 | Scalarax60MONTrfDevSatFrames | read-only | current | Satellite Frames for Device. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.6.5 | Scalarax60MONTrfDevEthACM | read-only | current | Ethernet ACM messages for Device. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.6.6 | Scalarax60MONTrfDevSatACM | read-only | current | Satellite ACM messages for Device. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.6.7 | Scalarax60MONTrfDevEthAccu | read-only | current | Ethernet Frames for Device, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.6.8 | Scalarax60MONTrfDevSatAccu | read-only | current | Satellite Frames for Device, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.6.11 | Scalarax60MONTrfDevEthACMAccu | read-only | current | Ethernet ACM messages for Device, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.6.12 | Scalarax60MONTrfDevSatACMAccu | read-only | current | Satellite ACM messages for Device, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.7 | Scalarax60MONTrfWindow | read-write | current | Traffic Monitor Window (in s). |
| 1.3.6.1.4.1.29890.1.8.1.4.9.8 | Scalarax60MONTrfReset | read-write | current | Reset Throughput entries to zero. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.9 | Nodeax60MonitorTrafficStr | |||
| 1.3.6.1.4.1.29890.1.8.1.4.9.9.1 | Scalarax60MONTrfStrTXBBFrames | read-only | current | Transmitted BB Frames via Stream Output. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.9.2 | Scalarax60MONTrfStrTXBBBytes | read-only | current | Transmitted BB Frames Bytes via Stream Output. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.9.3 | Scalarax60MONTrfStrTXBBFramesAccu | read-only | current | Transmitted BB Frames via Stream Output, accumulated |
| 1.3.6.1.4.1.29890.1.8.1.4.9.9.4 | Scalarax60MONTrfStrTXTSFrames | read-only | current | Transmitted TS Frames via Stream Output. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.9.5 | Scalarax60MONTrfStrTXTSBytes | read-only | current | Transmitted TS Frames Bytes via Stream Output. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.9.6 | Scalarax60MONTrfStrTXTSFramesAccu | read-only | current | Transmitted TS Frames via Stream Output, accumulated |
| 1.3.6.1.4.1.29890.1.8.1.4.9.9.7 | Scalarax60MONTrfStrTXIQFrames | read-only | current | Transmitted IQ Frames via Stream Output. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.9.8 | Scalarax60MONTrfStrTXIQBytes | read-only | current | Transmitted IQ Frames Bytes via Stream Output. |
| 1.3.6.1.4.1.29890.1.8.1.4.9.9.9 | Scalarax60MONTrfStrTXIQFramesAccu | read-only | current | Transmitted IQ Frames via Stream Output, accumulated |
| 1.3.6.1.4.1.29890.1.8.1.4.10 | Nodeax60MonitorSystem | |||
| 1.3.6.1.4.1.29890.1.8.1.4.10.1 | Scalarax60MONSysOrdercode | read-only | current | System Ordercode. |
| 1.3.6.1.4.1.29890.1.8.1.4.10.2 | Scalarax60MONSysSerialnumber | read-only | current | System Serialnumber. |
| 1.3.6.1.4.1.29890.1.8.1.4.10.3 | Scalarax60MONSysProductionDate | read-only | current | System Production Date. |
| 1.3.6.1.4.1.29890.1.8.1.4.11 | Nodeax60MonitorACMHost | |||
| 1.3.6.1.4.1.29890.1.8.1.4.11.1 | Tableax60MonitorACMHostTable | not-accessible | current | A table of ACM Host Informations. Max. 255 entries. |
| 1.3.6.1.4.1.29890.1.8.1.4.11.1.1 | Rowax60MonACMHostEntry | not-accessible | current | An entry in the ACM Host Monitor. |
| 1.3.6.1.4.1.29890.1.8.1.4.11.1.1.1 | Columnax60MonACMHostIndex | read-only | current | Monitor ACM Host index. |
| 1.3.6.1.4.1.29890.1.8.1.4.11.1.1.2 | Columnax60MonACMHostIP | read-only | current | Monitor ACM Host IP Address. |
| 1.3.6.1.4.1.29890.1.8.1.4.11.1.1.3 | Columnax60MonACMHostMAC | read-only | current | Monitor ACM Host MAC Address. |
| 1.3.6.1.4.1.29890.1.8.1.4.11.1.1.4 | Columnax60MonACMHostDowngradeTimeout | read-only | current | Monitor ACM Host Downgrade Timeout in ms. |
| 1.3.6.1.4.1.29890.1.8.1.4.11.1.1.5 | Columnax60MonACMHostRemoveTimeout | read-only | current | Monitor ACM Host Remove Timeout in ms. |
| 1.3.6.1.4.1.29890.1.8.1.4.11.1.1.6 | Columnax60MonACMHostESNO | read-only | current | Monitor ACM Host Es/N0. |
| 1.3.6.1.4.1.29890.1.8.1.4.11.1.1.7 | Columnax60MonACMHostModCod | read-only | current | Monitor ACM Host Modcod. |
| 1.3.6.1.4.1.29890.1.8.1.4.11.1.1.8 | Columnax60MonACMHostACMType | read-only | current | Monitor ACM Host ACM Type. |
| 1.3.6.1.4.1.29890.1.8.1.4.11.1.1.9 | Columnax60MonACMHostMulticasts | read-only | current | Monitor ACM Host Multicasts. |
| 1.3.6.1.4.1.29890.1.8.1.4.11.2 | Scalarax60MonitorACMHostTableEntries | read-only | current | Number of Entries in the ACMHostTable |
| 1.3.6.1.4.1.29890.1.8.1.5 | Nodeax60SystemConfig | |||
| 1.3.6.1.4.1.29890.1.8.1.5.2 | Nodeax60MCInterface | |||
| 1.3.6.1.4.1.29890.1.8.1.5.2.8 | Scalarax60MCIPv4Address | read-write | current | Device IP address. |
| 1.3.6.1.4.1.29890.1.8.1.5.2.9 | Scalarax60MCSubnetMask | read-write | current | Device subnet mask. |
| 1.3.6.1.4.1.29890.1.8.1.5.2.10 | Scalarax60MCGateway | read-write | current | Gateway address. |
| 1.3.6.1.4.1.29890.1.8.1.5.2.15 | Scalarax60AccessViaData | read-write | current | Access via Data on/off |
| 1.3.6.1.4.1.29890.1.8.1.5.2.16 | Scalarax60AccessViaSat | read-write | current | Access via Sat on/off |
| 1.3.6.1.4.1.29890.1.8.1.5.2.17 | Scalarax60SNMPAccess | read-only | current | Access via SNMP on/off |
| 1.3.6.1.4.1.29890.1.8.1.5.2.18 | Scalarax60HTTPAccess | read-write | current | Access via HTTP on/off |
| 1.3.6.1.4.1.29890.1.8.1.5.2.19 | Scalarax60HTTPSAccess | read-write | current | Access via HTTPS on/off |
| 1.3.6.1.4.1.29890.1.8.1.5.2.20 | Scalarax60IPv4Access | read-write | current | Access via IPv4 on/off |
| 1.3.6.1.4.1.29890.1.8.1.5.2.21 | Scalarax60IPv6Access | read-write | current | Access via IPv6 on/off |
| 1.3.6.1.4.1.29890.1.8.1.5.2.22 | Scalarax60MCDHCP | read-write | current | DHCP on/off |
| 1.3.6.1.4.1.29890.1.8.1.5.2.24 | Scalarax60NMSOperation | read-write | current | NMS on/off |
| 1.3.6.1.4.1.29890.1.8.1.5.2.25 | Scalarax60NMSIPv4Address | read-write | current | NMS IPv4 Address |
| 1.3.6.1.4.1.29890.1.8.1.5.2.26 | Scalarax60TrafficServerIPv4Address | read-write | current | NCC traffic server IP address |
| 1.3.6.1.4.1.29890.1.8.1.5.2.30 | Nodeax60InmarsatDlt | |||
| 1.3.6.1.4.1.29890.1.8.1.5.2.30.1 | Scalarax60DLTOperation | read-write | current | DLT operation: off(0), on(1), debug mode(2) |
| 1.3.6.1.4.1.29890.1.8.1.5.2.30.2 | Scalarax60DLTAuthServerURL | read-write | current | DLT Authentification Server URL (without https://, max. 64 characters) |
| 1.3.6.1.4.1.29890.1.8.1.5.2.30.3 | Scalarax60DLTAuthServerPort | read-write | current | DLT Authentification Server TCP port (usually 443 or 8443). |
| 1.3.6.1.4.1.29890.1.8.1.5.2.30.4 | Scalarax60DLTAuthServerPath | read-write | current | DLT Authentification Server Path (e.g. /oauth2/v1/token, max. 64 characters) |
| 1.3.6.1.4.1.29890.1.8.1.5.2.30.5 | Scalarax60DLTAuthServerUsername | read-write | current | DLT Authentification Server Login Username (max. 64 characters) |
| 1.3.6.1.4.1.29890.1.8.1.5.2.30.6 | Scalarax60DLTAuthServerPassword | read-write | current | DLT Authentification Server Login Password (max. 64 characters) |
| 1.3.6.1.4.1.29890.1.8.1.5.2.30.7 | Scalarax60DLTAuthServerSelfSignedCertificates | read-write | current | DLT Authentification Server Self-Signed Certificates Handling: Deny(0), Accept(1) |
| 1.3.6.1.4.1.29890.1.8.1.5.2.30.8 | Scalarax60DLTWebsocketServerURL | read-write | current | DLT Websocket Server URL (without wss://, max. 64 characters) |
| 1.3.6.1.4.1.29890.1.8.1.5.2.30.9 | Scalarax60DLTWebsocketServerPort | read-write | current | DLT Websocket Server TCP port |
| 1.3.6.1.4.1.29890.1.8.1.5.2.30.10 | Scalarax60DLTWebsocketServerPath | read-write | current | DLT Websocket Server Path (e.g. /api/v1/websocket/schedule, max. 64 characters) |
| 1.3.6.1.4.1.29890.1.8.1.5.2.30.11 | Scalarax60DLTWebsocketServerSelfSignedCertificates | read-write | current | DLT Websocket Server Self-Signed Certificates Handling: Deny(0), Accept(1) |
| 1.3.6.1.4.1.29890.1.8.1.5.4 | Scalarax60Date | read-write | current | Current date. Use the form yyyymmdd to set. |
| 1.3.6.1.4.1.29890.1.8.1.5.5 | Scalarax60Time | read-write | current | Current time. Use the form hhmmss to set. |
| 1.3.6.1.4.1.29890.1.8.1.5.6 | Scalarax60Banner | read-write | current | Title string shown when the main menu is displayed. (max. 31 characters) |
| 1.3.6.1.4.1.29890.1.8.1.5.7 | Scalarax60FactoryReset | read-write | current | CAUTION: Writing 1 resets the device to as it was when delivered! |
| 1.3.6.1.4.1.29890.1.8.1.5.8 | Nodeax60FirmwareVersions | |||
| 1.3.6.1.4.1.29890.1.8.1.5.8.1 | Scalarax60FWBusbridgeFPGA | read-only | current | Frontpanel Firmware Version. |
| 1.3.6.1.4.1.29890.1.8.1.5.8.2 | Scalarax60FWLinux | read-only | current | Modulator Firmware Version. |
| 1.3.6.1.4.1.29890.1.8.1.5.8.6 | Scalarax60FWDemodulatorFPGA | read-only | current | Demodulator FPGA Version. |
| 1.3.6.1.4.1.29890.1.8.1.5.8.7 | Scalarax60FWModulator | read-only | current | Modulator Version. |
| 1.3.6.1.4.1.29890.1.8.1.5.8.12 | Scalarax60FWBootloader | read-only | current | Encapsulator Version. |
| 1.3.6.1.4.1.29890.1.8.1.5.8.13 | Scalarax60FWModulatorFPGA | read-only | current | Modulator FPGA Version. |
| 1.3.6.1.4.1.29890.1.8.1.5.11 | Scalarax60SerialNumber | read-only | current | Device Serial Number. |
| 1.3.6.1.4.1.29890.1.8.1.5.14 | Tableax60SavedConfigTable | not-accessible | current | Table of Saved Configurations. Max. 64 entries. |
| 1.3.6.1.4.1.29890.1.8.1.5.14.1 | Rowax60SavedConfigEntry | not-accessible | current | A Table of Saved Configurations. |
| 1.3.6.1.4.1.29890.1.8.1.5.14.1.1 | Columnax60SavedConfigIndex | read-only | current | Saved Configuration index. |
| 1.3.6.1.4.1.29890.1.8.1.5.14.1.2 | Columnax60SavedConfigName | read-write | current | Name of saved Configuration (max. 64 characters) |
| 1.3.6.1.4.1.29890.1.8.1.5.14.1.3 | Columnax60SavedConfigComment | read-write | current | Comment for saved Configuration (max. 256 characters) |
| 1.3.6.1.4.1.29890.1.8.1.5.14.1.4 | Columnax60SavedConfigDate | read-only | current | Date of Saved Configuration. |
| 1.3.6.1.4.1.29890.1.8.1.5.15 | Scalarax60SavedConfigLoad | read-write | current | Load Saved Configuration by set Index. |
| 1.3.6.1.4.1.29890.1.8.1.5.16 | Scalarax60SavedConfigDelete | read-write | current | Delete Saved Configuration by set Index. |
| 1.3.6.1.4.1.29890.1.8.1.5.17 | Scalarax60SavedConfigAddNew | read-write | current | Add new Saved Configuration. |
| 1.3.6.1.4.1.29890.1.8.1.5.18 | Nodeax60FileUploadDownload | |||
| 1.3.6.1.4.1.29890.1.8.1.5.18.1 | Scalarax60FileTransferProtocol | read-write | current | File upload / download transfer - protocol type. |
| 1.3.6.1.4.1.29890.1.8.1.5.18.2 | Scalarax60TransferDirection | read-write | current | File upload / download transfer - protocol direction. |
| 1.3.6.1.4.1.29890.1.8.1.5.18.3 | Scalarax60FileType | read-write | current | File upload / download transfer - file type. |
| 1.3.6.1.4.1.29890.1.8.1.5.18.4 | Scalarax60FileServerIPv4Address | read-write | current | File upload / download transfer - server ip address. |
| 1.3.6.1.4.1.29890.1.8.1.5.18.5 | Scalarax60FileServerPort | read-write | current | File upload / download transfer - server port number. |
| 1.3.6.1.4.1.29890.1.8.1.5.18.6 | Scalarax60FileServerUsername | read-write | current | File upload / download transfer - server login username (max. 64 characters) |
| 1.3.6.1.4.1.29890.1.8.1.5.18.7 | Scalarax60FileServerPassword | read-write | current | File upload / download transfer - server login username (max. 64 characters) |
| 1.3.6.1.4.1.29890.1.8.1.5.18.8 | Scalarax60FilenamePath | read-write | current | File upload / download transfer - file path on server (max. 256 characters) |
| 1.3.6.1.4.1.29890.1.8.1.5.18.9 | Scalarax60StartUploadDownload | read-write | current | File upload / download transfer - start upload download (trigger) |
| 1.3.6.1.4.1.29890.1.8.1.5.18.10 | Scalarax60UploadDownloadStatus | read-only | current | File upload / download transfer - file upload download status |
| 1.3.6.1.4.1.29890.1.8.1.5.19 | Scalarax60WarnAlarmReset | read-write | current | Warning Alarm Reset Setting. |
| 1.3.6.1.4.1.29890.1.8.1.5.20 | Scalarax60AlarmTXSignal | read-write | current | TX Signal automatic setting on alarm trigger. |
| 1.3.6.1.4.1.29890.1.8.1.5.21 | Scalarax60MCIPSettingsConfigLoad | read-write | current | Config upload M&C IP settings - can be overwritten(use new settings) or keep old settings(do not overwrite). |
| 1.3.6.1.4.1.29890.1.8.1.5.22 | Scalarax60ManualAlarmReset | read-write | current | Manual Alarm Reset Setting. |
| 1.3.6.1.4.1.29890.1.8.1.5.99 | Nodeax60SNMP | |||
| 1.3.6.1.4.1.29890.1.8.1.5.99.3 | Tableax60TrapSinkServerTable | not-accessible | current | A table of servers to receive traps. Max. 4 entries. |
| 1.3.6.1.4.1.29890.1.8.1.5.99.3.1 | Rowax60TrapSinkServerEntry | not-accessible | current | An entry in the server table. |
| 1.3.6.1.4.1.29890.1.8.1.5.99.3.1.1 | Columnax60TrapSinkDescription | read-write | current | Trap receiver description (max. 31 characters). |
| 1.3.6.1.4.1.29890.1.8.1.5.99.3.1.2 | Columnax60TrapSinkIP | read-write | current | Trap receiver IP address. |
| 1.3.6.1.4.1.29890.1.8.1.5.99.3.1.3 | Columnax60TrapSinkPort | read-write | current | Trap receiver UDP port (usually 162). |
| 1.3.6.1.4.1.29890.1.8.1.5.99.3.1.4 | Columnax60TrapSinkMask | read-write | current | Bit mask for enabled traps. |
| 1.3.6.1.4.1.29890.1.8.1.5.99.3.1.5 | Columnax60TrapSinkCommunity | read-write | current | Trap community (max. 31 characters). |
| 1.3.6.1.4.1.29890.1.8.1.5.99.3.1.99 | Columnax60TrapSinkIndex | read-only | current | Trap index. |
| 1.3.6.1.4.1.29890.1.8.1.6 | Nodeax60Status | |||
| 1.3.6.1.4.1.29890.1.8.1.6.1 | Scalarax60GlobalStatus | read-only | current | Global status. |
| 1.3.6.1.4.1.29890.1.8.1.6.2 | Tableax60AlarmWarningIDTable | not-accessible | current | Alarm Warning ID Table. Max. 24 entries. |
| 1.3.6.1.4.1.29890.1.8.1.6.2.1 | Rowax60AlarmWarningIDTableEntry | not-accessible | current | Alarm Warning ID Table |
| 1.3.6.1.4.1.29890.1.8.1.6.2.1.1 | Columnax60AlarmWarningIDIndex | read-only | current | Alarm Warning ID Table Index. |
| 1.3.6.1.4.1.29890.1.8.1.6.2.1.2 | Columnax60AlarmWarningID | read-only | current | Alarm Warning ID Number. |
| 1.3.6.1.4.1.29890.1.8.1.6.3 | Scalarax60DataInterfaceStatus | read-only | current | Data Interface status. |
| 1.3.6.1.4.1.29890.1.8.1.7 | Nodeax60Alarms | |||
| 1.3.6.1.4.1.29890.1.8.1.7.1 | Scalarax60ClearLOG | read-write | current | Clear all alarm entries. |
| 1.3.6.1.4.1.29890.1.8.1.7.3 | Scalarax60ResetWarnings | read-write | current | Reset all warnings. |
| 1.3.6.1.4.1.29890.1.8.1.7.4 | Scalarax60ResetAlarms | read-write | current | Reset all alarms. |
| 1.3.6.1.4.1.29890.1.8.1.8 | Nodeax60Power | |||
| 1.3.6.1.4.1.29890.1.8.1.8.1 | Scalarax60RebootDevice | read-write | current | Reboot Device |
| 1.3.6.1.4.1.29890.1.8.1.102 | Nodeax60MultiDemodulatorConfig | |||
| 1.3.6.1.4.1.29890.1.8.1.102.1 | Nodeax60MultiDemodulator0Config | |||
| 1.3.6.1.4.1.29890.1.8.1.102.1.1 | Scalarax60MultiDMD0RXFrequency | read-write | current | RX frequency in Hz. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.3 | Scalarax60MultiDMD0SymbolRate | read-write | current | Symbol rate in sps. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.5 | Scalarax60MultiDMD0PLScrambling | read-write | current | DVB-S2 PL Scrambling. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.6 | Scalarax60MultiDMD0LNBPower | read-write | current | LNB power supply. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.7 | Scalarax60MultiDMD0Multistream | read-write | current | Multistream on/off. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.8 | Scalarax60MultiDMD0MultistreamISI | read-write | current | Multistream ISI. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.9 | Nodeax60MultiDMD0ACMController | |||
| 1.3.6.1.4.1.29890.1.8.1.102.1.9.1 | Scalarax60MultiDMD0ACMControllerSendPort | read-write | current | Send ACM data via none / Ethernet / Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.9.2 | Scalarax60MultiDMD0ACMControllerIPv4Address | read-write | current | IP Address ACM Master. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.9.3 | Scalarax60MultiDMD0ACMControllerDMDChannel | read-write | current | Demodulator Channel. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.9.4 | Scalarax60MultiDMD0ACMControllerResponseTime | read-write | current | Response time in 100ms. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.9.5 | Scalarax60MultiDMD0ACMControllerIPv6Address | read-write | current | IPv6 Address ACM Master. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.9.6 | Scalarax60MultiDMD0ControllerACMPort | read-write | current | Demodulator ACM Port (needs OTMP license) |
| 1.3.6.1.4.1.29890.1.8.1.102.1.10 | Scalarax60MultiDMD0SatMACFilter | read-write | current | Sat MAC Filter. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.11 | Scalarax60MultiDMD0RXProcessing | read-write | current | RX Processing (default: on). |
| 1.3.6.1.4.1.29890.1.8.1.102.1.12 | Scalarax60MultiDMD0RedundantSatMAC | read-write | current | Redundant Sat MAC. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.14 | Nodeax60MultiDMD0StreamOutput | |||
| 1.3.6.1.4.1.29890.1.8.1.102.1.14.2 | Scalarax60MultiDMD0SOIPOutput | read-write | current | Stream Output: IP Output Protocol. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.14.3 | Scalarax60MultiDMD0SOIPv4Destination | read-write | current | Stream Output: IPv4 Destination. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.14.4 | Scalarax60MultiDMD0SOIPv6Destination | read-write | current | Stream Output: IPv6 Destination. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.14.5 | Scalarax60MultiDMD0SOSourcePort | read-write | current | Stream Output: UDP Source Port. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.14.6 | Scalarax60MultiDMD0SODestinationPort | read-write | current | Stream Output: UDP Destination Port. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.14.7 | Scalarax60MultiDMD0SOBBFramePadding | read-write | current | Stream Output: BB Frame Padding. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.14.8 | Scalarax60MultiDMD0SORTStreamformat | read-write | current | Stream Output RT: Stream Format. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.14.9 | Scalarax60MultiDMD0SOStreamMode | read-write | current | Stream Output: Frame Mode. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.14.10 | Scalarax60MultiDMD0IqDecimator | read-write | current | IQ Data Output: Decimator. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.14.11 | Scalarax60MultiDMD0ASIOutput | read-write | current | ASI Output: Operation. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.15 | Nodeax60MultiDMD0ClockSyncronization | |||
| 1.3.6.1.4.1.29890.1.8.1.102.1.15.1 | Scalarax60MultiDMD0CSTriggerMode | read-write | current | RT Clock Syncronization: Trigger Mode. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.15.2 | Scalarax60MultiDMD0CSTermination | read-write | current | RT Clock Syncronization: Termination. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.15.3 | Scalarax60MultiDMD0CSTriggerNow | read-write | current | RT Trigger Now. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.16 | Scalarax60MultiDMD0DVBMode | read-write | current | DVB Mode. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.17 | Scalarax60MultiDMD0IFInputImpedance | read-write | current | IF Input Impedance. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.18 | Nodeax60MultiDMD0MPE | |||
| 1.3.6.1.4.1.29890.1.8.1.102.1.18.1 | Scalarax60MultiDMD0MPEOperation | read-write | current | MPE Operation. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.18.2 | Tableax60MultiMPEPid0Table | not-accessible | current | Table of MPE Pid's. Max. 16 entries. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.18.2.1 | Rowax60MultiMPEPid0Entry | not-accessible | current | A Table of Saved Configurations. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.18.2.1.1 | Columnax60MultiMPEPid0Index | read-only | current | MPE Pid index. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.18.2.1.2 | Columnax60MultiMPEPid0 | read-write | current | MPE Pid. |
| 1.3.6.1.4.1.29890.1.8.1.102.1.19 | Scalarax60MultiDMD0Decaps | read-write | current | RX Processing (default: on). |
| 1.3.6.1.4.1.29890.1.8.1.102.1.99 | Scalarax60MultiDMD0ConfigIndex | read-only | current | Demodulator Configs Table Index. |
| 1.3.6.1.4.1.29890.1.8.1.102.2 | Nodeax60MultiDemodulator1Config | |||
| 1.3.6.1.4.1.29890.1.8.1.102.2.1 | Scalarax60MultiDMD1RXFrequency | read-write | current | RX frequency in Hz. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.3 | Scalarax60MultiDMD1SymbolRate | read-write | current | Symbol rate in sps. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.5 | Scalarax60MultiDMD1PLScrambling | read-write | current | DVB-S2 PL Scrambling. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.6 | Scalarax60MultiDMD1LNBPower | read-write | current | LNB power supply. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.7 | Scalarax60MultiDMD1Multistream | read-write | current | Multistream on/off. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.8 | Scalarax60MultiDMD1MultistreamISI | read-write | current | Multistream ISI. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.9 | Nodeax60MultiDMD1ACMController | |||
| 1.3.6.1.4.1.29890.1.8.1.102.2.9.1 | Scalarax60MultiDMD1ACMControllerSendPort | read-write | current | Send ACM data via none / Ethernet / Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.9.2 | Scalarax60MultiDMD1ACMControllerIPv4Address | read-write | current | IP Address ACM Master. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.9.3 | Scalarax60MultiDMD1ACMControllerDMDChannel | read-write | current | Demodulator Channel. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.9.4 | Scalarax60MultiDMD1ACMControllerResponseTime | read-write | current | Response time in 100ms. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.9.5 | Scalarax60MultiDMD1ACMControllerIPv6Address | read-write | current | IPv6 Address ACM Master. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.9.6 | Scalarax60MultiDMD1ControllerACMPort | read-write | current | Demodulator ACM Port (needs OTMP license) |
| 1.3.6.1.4.1.29890.1.8.1.102.2.10 | Scalarax60MultiDMD1SatMACFilter | read-write | current | Sat MAC Filter. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.11 | Scalarax60MultiDMD1RXProcessing | read-write | current | RX Processing (default: on). |
| 1.3.6.1.4.1.29890.1.8.1.102.2.12 | Scalarax60MultiDMD1RedundantSatMAC | read-write | current | Redundant Sat MAC. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.14 | Nodeax60MultiDMD1StreamOutput | |||
| 1.3.6.1.4.1.29890.1.8.1.102.2.14.2 | Scalarax60MultiDMD1SOIPOutput | read-write | current | Stream Output: IP Output Protocol. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.14.3 | Scalarax60MultiDMD1SOIPv4Destination | read-write | current | Stream Output: IPv4 Destination. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.14.4 | Scalarax60MultiDMD1SOIPv6Destination | read-write | current | Stream Output: IPv6 Destination. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.14.5 | Scalarax60MultiDMD1SOSourcePort | read-write | current | Stream Output: UDP Source Port. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.14.6 | Scalarax60MultiDMD1SODestinationPort | read-write | current | Stream Output: UDP Destination Port. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.14.7 | Scalarax60MultiDMD1SOBBFramePadding | read-write | current | Stream Output: BB Frame Padding. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.14.8 | Scalarax60MultiDMD1SORTStreamformat | read-write | current | Stream Output RT: Stream Format. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.14.9 | Scalarax60MultiDMD1SOStreamMode | read-write | current | Stream Output: Frame Mode. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.14.10 | Scalarax60MultiDMD1IqDecimator | read-write | current | IQ Data Output: Decimator. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.14.11 | Scalarax60MultiDMD1ASIOutput | read-write | current | ASI Output: Operation. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.15 | Nodeax60MultiDMD1ClockSyncronization | |||
| 1.3.6.1.4.1.29890.1.8.1.102.2.15.1 | Scalarax60MultiDMD1CSTriggerMode | read-write | current | RT Clock Syncronization: Trigger Mode. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.15.2 | Scalarax60MultiDMD1CSTermination | read-write | current | RT Clock Syncronization: Termination. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.15.3 | Scalarax60MultiDMD1CSTriggerNow | read-write | current | RT Trigger Now. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.16 | Scalarax60MultiDMD1DVBMode | read-write | current | DVB Mode. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.17 | Scalarax60MultiDMD1IFInputImpedance | read-write | current | IF Input Impedance. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.18 | Nodeax60MultiDMD1MPE | |||
| 1.3.6.1.4.1.29890.1.8.1.102.2.18.1 | Scalarax60MultiDMD1MPEOperation | read-write | current | MPE Operation. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.18.2 | Tableax60MultiMPEPid1Table | not-accessible | current | Table of MPE Pid's. Max. 16 entries. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.18.2.1 | Rowax60MultiMPEPid1Entry | not-accessible | current | A Table of Saved Configurations. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.18.2.1.1 | Columnax60MultiMPEPid1Index | read-only | current | MPE Pid index. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.18.2.1.2 | Columnax60MultiMPEPid1 | read-write | current | MPE Pid. |
| 1.3.6.1.4.1.29890.1.8.1.102.2.19 | Scalarax60MultiDMD1Decaps | read-write | current | RX Processing (default: on). |
| 1.3.6.1.4.1.29890.1.8.1.102.2.99 | Scalarax60MultiDMD1ConfigIndex | read-only | current | Demodulator Configs Table Index. |
| 1.3.6.1.4.1.29890.1.8.1.102.3 | Nodeax60MultiDemodulator2Config | |||
| 1.3.6.1.4.1.29890.1.8.1.102.3.1 | Scalarax60MultiDMD2RXFrequency | read-write | current | RX frequency in Hz. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.3 | Scalarax60MultiDMD2SymbolRate | read-write | current | Symbol rate in sps. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.5 | Scalarax60MultiDMD2PLScrambling | read-write | current | DVB-S2 PL Scrambling. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.6 | Scalarax60MultiDMD2LNBPower | read-write | current | LNB power supply. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.7 | Scalarax60MultiDMD2Multistream | read-write | current | Multistream on/off. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.8 | Scalarax60MultiDMD2MultistreamISI | read-write | current | Multistream ISI. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.9 | Nodeax60MultiDMD2ACMController | |||
| 1.3.6.1.4.1.29890.1.8.1.102.3.9.1 | Scalarax60MultiDMD2ACMControllerSendPort | read-write | current | Send ACM data via none / Ethernet / Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.9.2 | Scalarax60MultiDMD2ACMControllerIPv4Address | read-write | current | IP Address ACM Master. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.9.3 | Scalarax60MultiDMD2ACMControllerDMDChannel | read-write | current | Demodulator Channel. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.9.4 | Scalarax60MultiDMD2ACMControllerResponseTime | read-write | current | Response time in 100ms. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.9.5 | Scalarax60MultiDMD2ACMControllerIPv6Address | read-write | current | IPv6 Address ACM Master. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.9.6 | Scalarax60MultiDMD2ControllerACMPort | read-write | current | Demodulator ACM Port (needs OTMP license) |
| 1.3.6.1.4.1.29890.1.8.1.102.3.10 | Scalarax60MultiDMD2SatMACFilter | read-write | current | Sat MAC Filter. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.11 | Scalarax60MultiDMD2RXProcessing | read-write | current | RX Processing (default: on). |
| 1.3.6.1.4.1.29890.1.8.1.102.3.12 | Scalarax60MultiDMD2RedundantSatMAC | read-write | current | Redundant Sat MAC. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.14 | Nodeax60MultiDMD2StreamOutput | |||
| 1.3.6.1.4.1.29890.1.8.1.102.3.14.2 | Scalarax60MultiDMD2SOIPOutput | read-write | current | Stream Output: IP Output Protocol. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.14.3 | Scalarax60MultiDMD2SOIPv4Destination | read-write | current | Stream Output: IPv4 Destination. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.14.4 | Scalarax60MultiDMD2SOIPv6Destination | read-write | current | Stream Output: IPv6 Destination. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.14.5 | Scalarax60MultiDMD2SOSourcePort | read-write | current | Stream Output: UDP Source Port. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.14.6 | Scalarax60MultiDMD2SODestinationPort | read-write | current | Stream Output: UDP Destination Port. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.14.7 | Scalarax60MultiDMD2SOBBFramePadding | read-write | current | Stream Output: BB Frame Padding. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.14.8 | Scalarax60MultiDMD2SORTStreamformat | read-write | current | Stream Output RT: Stream Format. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.14.9 | Scalarax60MultiDMD2SOStreamMode | read-write | current | Stream Output: Frame Mode. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.14.10 | Scalarax60MultiDMD2IqDecimator | read-write | current | IQ Data Output: Decimator. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.14.11 | Scalarax60MultiDMD2ASIOutput | read-write | current | ASI Output: Operation. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.15 | Nodeax60MultiDMD2ClockSyncronization | |||
| 1.3.6.1.4.1.29890.1.8.1.102.3.15.1 | Scalarax60MultiDMD2CSTriggerMode | read-write | current | RT Clock Syncronization: Trigger Mode. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.15.2 | Scalarax60MultiDMD2CSTermination | read-write | current | RT Clock Syncronization: Termination. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.15.3 | Scalarax60MultiDMD2CSTriggerNow | read-write | current | RT Trigger Now. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.16 | Scalarax60MultiDMD2DVBMode | read-write | current | DVB Mode. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.17 | Scalarax60MultiDMD2IFInputImpedance | read-write | current | IF Input Impedance. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.18 | Nodeax60MultiDMD2MPE | |||
| 1.3.6.1.4.1.29890.1.8.1.102.3.18.1 | Scalarax60MultiDMD2MPEOperation | read-write | current | MPE Operation. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.18.2 | Tableax60MultiMPEPid2Table | not-accessible | current | Table of MPE Pid's. Max. 16 entries. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.18.2.1 | Rowax60MultiMPEPid2Entry | not-accessible | current | A Table of Saved Configurations. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.18.2.1.1 | Columnax60MultiMPEPid2Index | read-only | current | MPE Pid index. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.18.2.1.2 | Columnax60MultiMPEPid2 | read-write | current | MPE Pid. |
| 1.3.6.1.4.1.29890.1.8.1.102.3.19 | Scalarax60MultiDMD2Decaps | read-write | current | RX Processing (default: on). |
| 1.3.6.1.4.1.29890.1.8.1.102.3.99 | Scalarax60MultiDMD2ConfigIndex | read-only | current | Demodulator Configs Table Index. |
| 1.3.6.1.4.1.29890.1.8.1.104 | Nodeax60MultiMonitor | |||
| 1.3.6.1.4.1.29890.1.8.1.104.2 | Nodeax60MultiMonitorDMD | |||
| 1.3.6.1.4.1.29890.1.8.1.104.2.1 | Tableax60MultiMonitorDMDTable | not-accessible | current | Multiple Demodulator Monitor Table. Max. 3 entries. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1 | Rowax60MultiMonitorDMDTableEntry | not-accessible | current | An entry in the Multiple Demodulator Monitor Table. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.1 | Columnax60MultiMONDMDLock | read-only | current | Demodulator Lock State: none / signal lock / full lock. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.2 | Columnax60MultiMONDMDModulationFEC | read-only | current | DVB-S2/DVB-S2X Mode Demodulator Modulation / FEC Rate. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.3 | Columnax60MultiMONDMDPilots | read-only | current | DVB-S2/DVB-S2X Mode Demodulator DVB-S2 Pilots. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.5 | Columnax60MultiMONDMDCoding | read-only | current | Demodulator Coding/Modulation: ACM / CCM. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.6 | Columnax60MultiMONDMDRollOff | read-only | current | Demodulator detected roll-off. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.7 | Columnax60MultiMONDMDSpectrumInversion | read-only | current | Demodulator spectrum inversion. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.8 | Columnax60MultiMONDMDInputLevel | read-only | current | Demodulator RF Input Level in 10th dBm. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.9 | Columnax60MultiMONDMDEsN0 | read-only | current | Demodulator Es/N0 in 10th dB. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.10 | Columnax60MultiMONDMDFrequencyOffset | read-only | current | Demodulator Carrier Frequency Offset in Hz. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.11 | Columnax60MultiMONDMDSymbolRateOffset | read-only | current | Demodulator Symbol Rate Offset in ppm. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.12 | Columnax60MultiMONDMDLockLosses | read-only | current | Demodulator Lock Losses. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.15 | Columnax60MultiMONDMDDatarate | read-only | current | Demodulator Data Rate in bps. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.16 | Columnax60MultiMONDMDEbN0 | read-only | current | Demodulator Eb/N0 in 10th dB. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.17 | Columnax60MultiMONDMDSC | read-only | current | Demodulator Second Carrier State. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.19 | Columnax60MultiMONDMDBBFrameLosses | read-only | current | DVB-S2/DVB-S2X Mode Demodulator BB Frame Losses. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.20 | Columnax60MultiEsN0ModulatedFrame | read-only | current | Es/N0 (modulated frame) in 10th dB. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.22 | Columnax60MultiMONDMDCurrentTimestamp | read-only | current | Demodulator Option RT Current Timestamp. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.23 | Columnax60MultiMONDMDCommunication | read-only | current | Demodulator Option RT Communication. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.24 | Columnax60MultiMONDMDOven | read-only | current | Demodulator Option RT Oven. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.25 | Columnax60MultiMONDMDPLL | read-only | current | Demodulator Option RT PLL. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.26 | Columnax60MultiMONDMDExternalReference | read-only | current | Demodulator Option RT External Reference. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.29 | Columnax60MultiMONDMDXMonLdpcErrorCounter | read-only | current | Extended Monitoring LDCP Error Counter. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.30 | Columnax60MultiMONDMDXMonEvm | read-only | current | Extended Monitoring EVM. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.31 | Columnax60MultiMONDMDModulationFECDVBSMode | read-only | current | DVB-S Mode Demodulator Modulation / FEC Rate. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.32 | Columnax60MultiMONDMDExtLockStat | read-only | current | Extended Lock Status as decimal value. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.33 | Columnax60MultiMONDMDModcodMargin | read-only | current | MODCOD Margin. in 10th dB. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.1.1.99 | Columnax60MultiMonitorDMDIndex | read-only | current | Multi Demodulator Monitor Table Index. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.50 | Tableax60MONDMD0ModcodCounterTable | not-accessible | current | A table of Modcods. Max. 255 entries. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.50.1 | Rowax60MONDMD0ModcodCounterEntry | not-accessible | current | An entry in the Modcods counter table. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.50.1.1 | Columnax60MONDMD0EntryModcod | read-only | current | Modcod entry index. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.50.1.2 | Columnax60MONDMD0EntryModcodCounter | read-only | current | Modcod counter. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.51 | Tableax60MONDMD1ModcodCounterTable | not-accessible | current | A table of Modcods. Max. 255 entries. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.51.1 | Rowax60MONDMD1ModcodCounterEntry | not-accessible | current | An entry in the Modcods counter table. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.51.1.1 | Columnax60MONDMD1EntryModcod | read-only | current | Modcod entry index. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.51.1.2 | Columnax60MONDMD1EntryModcodCounter | read-only | current | Modcod counter. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.52 | Tableax60MONDMD2ModcodCounterTable | not-accessible | current | A table of Modcods. Max. 255 entries. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.52.1 | Rowax60MONDMD2ModcodCounterEntry | not-accessible | current | An entry in the Modcods counter table. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.52.1.1 | Columnax60MONDMD2EntryModcod | read-only | current | Modcod entry index. |
| 1.3.6.1.4.1.29890.1.8.1.104.2.52.1.2 | Columnax60MONDMD2EntryModcodCounter | read-only | current | Modcod counter. |
| 1.3.6.1.4.1.29890.1.8.1.104.9 | Nodeax60MultiMonitorTraffic | |||
| 1.3.6.1.4.1.29890.1.8.1.104.9.1 | Nodeax60MultiMonitorTrafficSat | |||
| 1.3.6.1.4.1.29890.1.8.1.104.9.1.1 | Tableax60MultiMonitorTrafficSatTable | not-accessible | current | Multiple Demodulator Satellite Traffic Monitor Table. Max. 3 entries. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.1.1.1 | Rowax60MultiMonitorTrafficSatTableEntry | not-accessible | current | An entry in the Multiple Satellite Traffic Monitor Table. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.1.1.1.7 | Columnax60MultiMONTrfSatRxBBBytes | read-only | current | Received BB Bytes via Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.1.1.1.8 | Columnax60MultiMONTrfSatRxBBFrames | read-only | current | Received BB Frames via Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.1.1.1.9 | Columnax60MultiMONTrfSatRxBBFramesAccu | read-only | current | Received BB Frames via Satellite, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.1.1.1.10 | Columnax60MultiMONTrfSatRxIQBytes | read-only | current | Received IQ Bytes via Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.1.1.1.11 | Columnax60MultiMONTrfSatRxIQFrames | read-only | current | Received IQ Frames via Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.1.1.1.12 | Columnax60MultiMONTrfSatRxIQFramesAccu | read-only | current | Received IQ Frames via Satellite, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.1.1.1.13 | Columnax60MultiMONTrfSatRxFeedbackFrames | read-only | current | Received Feedback Frames via Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.1.1.1.14 | Columnax60MultiMONTrfSatRxFeedbackFramesAccu | read-only | current | Received Feedback Frames via Satellite, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.1.1.1.15 | Columnax60MultiMONTrfSatRxSumBytes | read-only | current | Received Bytes via Satellite, summe of all. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.1.1.1.16 | Columnax60MultiMONTrfSatRxSumFrames | read-only | current | Received Frames via Satellite, summe of all. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.1.1.1.17 | Columnax60MultiMONTrfSatRxSumFramesAccu | read-only | current | Received Frames via Satellite, accumulated, summe of all. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.1.1.1.18 | Columnax60MultiMONTrfSatRxTSBytes | read-only | current | Received TS Bytes via Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.1.1.1.19 | Columnax60MultiMONTrfSatRxTSFrames | read-only | current | Received TS Frames via Satellite. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.1.1.1.20 | Columnax60MultiMONTrfSatRxTSFramesAccu | read-only | current | Received TS Frames via Satellite, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.1.1.1.99 | Columnax60MultiMonitorTrafficSatIndex | read-only | current | Multi Traffic Satellite Monitor Table Index. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.2 | Nodeax60MultiMonitorTrafficEth | |||
| 1.3.6.1.4.1.29890.1.8.1.104.9.2.1 | Tableax60MultiMonitorTrafficEthTable | not-accessible | current | Multiple Demodulator Ethernet Traffic Monitor Table. Max. 3 entries. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.2.1.1 | Rowax60MultiMonitorTrafficEthTableEntry | not-accessible | current | An entry in the Multiple Ethernet Traffic Monitor Table. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.2.1.1.3 | Columnax60MultiMONTrfEthTxFrames | read-only | current | Transmitted Frames via Ethernet. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.2.1.1.4 | Columnax60MultiMONTrfEthTxBytes | read-only | current | Transmitted Bytes via Ethernet. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.2.1.1.5 | Columnax60MultiMONTrfEthTxDrop | read-only | current | Dropped Transmit Frames via Ethernet. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.2.1.1.7 | Columnax60MultiMONTrfEthTxFramesAccu | read-only | current | Transmitted Frames via Ethernet, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.2.1.1.8 | Columnax60MultiMONTrfEthTxDropAccu | read-only | current | Dropped Transmit Frames via Ethernet, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.2.1.1.99 | Columnax60MultiMonitorTrafficEthIndex | read-only | current | Multi Traffic Ethernet Monitor Table Index. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.4 | Nodeax60MultiMonitorTrafficDec | |||
| 1.3.6.1.4.1.29890.1.8.1.104.9.4.1 | Tableax60MultiMonitorTrafficDecTable | not-accessible | current | Multiple Demodulator Decapsulator Traffic Monitor Table. Max. 3 entries. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.4.1.1 | Rowax60MultiMonitorTrafficDecTableEntry | not-accessible | current | An entry in the Multiple Decapsulator Traffic Monitor Table. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.4.1.1.1 | Columnax60MultiMONTrfDecRxFrames | read-only | current | Received Frames in Decapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.4.1.1.2 | Columnax60MultiMONTrfDecRxBytes | read-only | current | Received Bytes in Decapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.4.1.1.3 | Columnax60MultiMONTrfDecTxFrames | read-only | current | Transmitted Frames in Decapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.4.1.1.4 | Columnax60MultiMONTrfDecTxBytes | read-only | current | Transmitted Bytes in Decapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.4.1.1.5 | Columnax60MultiMONTrfDecTxUnfrag | read-only | current | Transmitted Full Frames in Decapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.4.1.1.6 | Columnax60MultiMONTrfDecTxFrag | read-only | current | Transmitted Fragmented Frames in Decapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.4.1.1.7 | Columnax60MultiMONTrfDecTxFragFrags | read-only | current | Transmitted Frame Fragments in Decapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.4.1.1.8 | Columnax60MultiMONTrfDecTxDrop | read-only | current | Dropped Transmit Frames in Decapsulator. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.4.1.1.9 | Columnax60MultiMONTrfDecRxAccu | read-only | current | Received Frames in Decapsulator, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.4.1.1.10 | Columnax60MultiMONTrfDecTxUnfragAccu | read-only | current | Transmitted Full Frames in Decapsulator, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.4.1.1.11 | Columnax60MultiMONTrfDecTxFragAccu | read-only | current | Transmitted Fragmented Frames in Decapsulator, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.4.1.1.12 | Columnax60MultiMONTrfDecTxDropAccu | read-only | current | Dropped Transmit Frames in Decapsulator, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.4.1.1.13 | Columnax60MultiMONTrfDecTxAccu | read-only | current | Transmit Frames in Decapsulator, accumulated. |
| 1.3.6.1.4.1.29890.1.8.1.104.9.4.1.1.99 | Columnax60MultiMonitorTrafficDecIndex | read-only | current | Multi Traffic Decapsulator Monitor Table Index. |