AXD301-SPVC-MIB
133 objects
No module-level DESCRIPTION found.
Imported Objects
| AXD301-PCH-MIB MISSING | atmVclVci atmVclVpi atmVplVpi |
| Axd301Comm-OMS MISSING | ats DateAndTime |
| Axd301EqmIf-SWS MISSING | IfIndex ifIndex |
| Axd301Eva-OMS MISSING | currentAlarmCause currentAlarmClass currentAlarmFaultId currentAlarmInformation currentAlarmSeverity currentAlarmX733Cause eventIndex eventSender eventTime |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge |
| RFC1213-MIB | DisplayString |
| SNMPv2-TC | RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.353 | NodeatmForum | |||
| 1.3.6.1.4.1.353.5 | NodeatmForumNetworkManagement | |||
| 1.3.6.1.4.1.353.5.5 | NodeatmSoftPvcMIB | |||
| 1.3.6.1.4.1.353.5.5.1 | NodeatmSoftPvcMIBObjects | |||
| 1.3.6.1.4.1.353.5.5.1.1 | NodeatmSoftPvcBaseGroup | |||
| 1.3.6.1.4.1.353.5.5.1.1.1 | ScalaratmSoftPvcCallFailuresTrapEnable | read-write | mandatory | Allows the generation of traps in response to call failures. By default, this object is set to 'false'. |
| 1.3.6.1.4.1.353.5.5.1.1.2 | ScalaratmSoftPvcCallFailures | read-only | mandatory | The number of times a series of call attempts has failed to establish a Soft PVCC or Soft PVPC. The number of call attempts in a series is determined by atmSof… |
| 1.3.6.1.4.1.353.5.5.1.1.3 | ScalaratmSoftPvcCurrentlyFailingSoftPVccs | read-only | mandatory | The current number of Soft PVCCs for which there is an active row in the atmSoftPVccTable having an atmSoftPVccOperStatus with a value other than 'connected'. |
| 1.3.6.1.4.1.353.5.5.1.1.4 | ScalaratmSoftPvcCurrentlyFailingSoftPVpcs | read-only | mandatory | The current number of Soft PVPCs for which there is an active row in the atmSoftPVpcTable having an atmSoftPVpcOperStatus with a value other than 'connected'. |
| 1.3.6.1.4.1.353.5.5.1.1.5 | ScalaratmSoftPvcNotificationInterval | read-write | mandatory | The minimum interval in seconds between the sending of atmSoftPvcCallFailuresTrap notifications. |
| 1.3.6.1.4.1.353.5.5.1.2 | TableatmSoftPVccTable | not-accessible | mandatory | The (conceptual) table used to manage Soft Permanent Virtual Channel Connections (Soft PVCCs). The Soft PVCC table is applicable only to switches. |
| 1.3.6.1.4.1.353.5.5.1.2.1 | RowatmSoftPVccEntry | not-accessible | mandatory | Each entry in this table represents a Soft Permanent Virtual Channel Connection (Soft PVCC) originating at a switch interface. A Soft PVCC is a VCC that is: - … |
| 1.3.6.1.4.1.353.5.5.1.2.1.1 | ColumnatmSoftPVccLeafReference | not-accessible | mandatory | An arbitrary integer which, in the case of the source VCL having a atmVclCastType of 'point_to_multi_point_root', serves to distinguish between the multiple le… |
| 1.3.6.1.4.1.353.5.5.1.2.1.2 | ColumnatmSoftPVccTargetAddress | read-write | mandatory | The target Atm Address of this Soft PVCC. |
| 1.3.6.1.4.1.353.5.5.1.2.1.3 | ColumnatmSoftPVccTargetSelectType | read-write | mandatory | Indicates whether the target VPI/VCI values are to be used at the destination. If the value 'any' is specified, the destination switch will choose the VPI/VCI … |
| 1.3.6.1.4.1.353.5.5.1.2.1.4 | ColumnatmSoftPVccTargetVpi | read-write | mandatory | The VPI value of the Soft PVCC used at the target interface. This value must be filled in when the atmSoftPVccTargetSelectType is set to 'required'. |
| 1.3.6.1.4.1.353.5.5.1.2.1.5 | ColumnatmSoftPVccTargetVci | read-write | mandatory | The VCI value of the Soft PVCC used at the target interface. This value must be filled in when the atmSoftPVccTargetSelectType is set to 'required'. |
| 1.3.6.1.4.1.353.5.5.1.2.1.6 | ColumnatmSoftPVccLastReleaseCause | read-only | mandatory | Value of the Cause field of the Cause Information Element in the last Release Signalling message received for this SPVCC. Indicates the reason for the Release. |
| 1.3.6.1.4.1.353.5.5.1.2.1.7 | ColumnatmSoftPVccLastReleaseDiagnostic | read-only | mandatory | Value of the first 8 bytes of diagnostic information from the Cause field of the Cause Information Element in the last Release Signalling message received for … |
| 1.3.6.1.4.1.353.5.5.1.2.1.8 | ColumnatmSoftPVccOperStatus | read-only | mandatory | Describes the status of the Soft PVCC. Valid values are: other - none of the types specified below establishmentInProgress - connection or party is not operati… |
| 1.3.6.1.4.1.353.5.5.1.2.1.9 | ColumnatmSoftPVccRestart | read-write | mandatory | When the value is set to 'restart' the Soft PVCC is released if necessary and a new setup procedure is begun. As a result of this action, the atmSoftPVccOperSt… |
| 1.3.6.1.4.1.353.5.5.1.2.1.10 | ColumnatmSoftPVccRetryInterval | read-write | mandatory | Defines the period to wait before attempting to establish the Soft PVCC after the first failed call attempt. Zero represents an infinite interval indicating no… |
| 1.3.6.1.4.1.353.5.5.1.2.1.11 | ColumnatmSoftPVccRetryTimer | read-only | mandatory | Indicates the current value of the retry timer in seconds for this connection. When the value reaches zero an attempt will be made to establish the Soft PVCC. … |
| 1.3.6.1.4.1.353.5.5.1.2.1.12 | ColumnatmSoftPVccRetryThreshold | read-write | mandatory | Indicates the number of consecutive call setup attempts for the same Soft PVCC which need to fail before the atmSoftPvcCallFailures object is incremented. A va… |
| 1.3.6.1.4.1.353.5.5.1.2.1.13 | ColumnatmSoftPVccRetryFailures | read-only | mandatory | Indicates how many attempts to establish the connection have failed. This counter is reset whenever a connection is successfully established or the SPVC is res… |
| 1.3.6.1.4.1.353.5.5.1.2.1.14 | ColumnatmSoftPVccRetryLimit | read-write | mandatory | Sets a maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the connection. If this limit i… |
| 1.3.6.1.4.1.353.5.5.1.2.1.15 | ColumnatmSoftPVccRowStatus | read-write | mandatory | Used to create and delete an SPVCC. When this object is set to 'active' an attempt is made to set up the SPVCC. When this object has the value 'active' and is … |
| 1.3.6.1.4.1.353.5.5.1.3 | TableatmSoftPVpcTable | not-accessible | mandatory | The (conceptual) table used to manage Soft Permanent Virtual Path Connections (Soft PVPCs). The Soft PVPC table is applicable only to switches. |
| 1.3.6.1.4.1.353.5.5.1.3.1 | RowatmSoftPVpcEntry | not-accessible | mandatory | Each entry in this table represents a Soft Permanent Virtual Path Connection (Soft PVPC) originating at a switch interface. A Soft PVPC is a VPC that is: - pro… |
| 1.3.6.1.4.1.353.5.5.1.3.1.1 | ColumnatmSoftPVpcLeafReference | not-accessible | mandatory | An arbitrary integer which, in the case of the source VPL having a atmVplCastType of 'point_to_multi_point_root', serves to distinguish between the multiple le… |
| 1.3.6.1.4.1.353.5.5.1.3.1.2 | ColumnatmSoftPVpcTargetAddress | read-write | mandatory | The target Atm Address of this SPVPC. |
| 1.3.6.1.4.1.353.5.5.1.3.1.3 | ColumnatmSoftPVpcTargetSelectType | read-write | mandatory | Indicates whether the target VPI value are to be used at the destination. If the value 'any' is specified, the destination switch will choose the VPI value. In… |
| 1.3.6.1.4.1.353.5.5.1.3.1.4 | ColumnatmSoftPVpcTargetVpi | read-write | mandatory | The VPI value of the Soft PVPC used at the target interface. This value must be filled in when the atmSoftPVpcTargetSelectType is set to 'required'. This value… |
| 1.3.6.1.4.1.353.5.5.1.3.1.5 | ColumnatmSoftPVpcLastReleaseCause | read-only | mandatory | Value of the Cause field of the Cause Information Element in the last Release Signalling message received for this Soft PVPC. Indicates the reason for the Rele… |
| 1.3.6.1.4.1.353.5.5.1.3.1.6 | ColumnatmSoftPVpcLastReleaseDiagnostic | read-only | mandatory | Value of the first 8 bytes of diagnostic information from the Cause field of the Cause Information Element in the last Release Signalling message received for … |
| 1.3.6.1.4.1.353.5.5.1.3.1.7 | ColumnatmSoftPVpcOperStatus | read-only | mandatory | Describes the status of the Soft PVPC. other - none of the types specified below establishmentInProgress - connection or party is not operational, but setup or… |
| 1.3.6.1.4.1.353.5.5.1.3.1.8 | ColumnatmSoftPVpcRestart | read-write | mandatory | When the value is set to 'restart' the Soft PVCC is released if necessary and a new setup procedure is begun. As a result of this action, the atmSoftPVpcOperSt… |
| 1.3.6.1.4.1.353.5.5.1.3.1.9 | ColumnatmSoftPVpcRetryInterval | read-write | mandatory | Defines the period to wait before attempting to establish the Soft PVPC after the first failed call attempt. Zero represents an infinite interval indicating no… |
| 1.3.6.1.4.1.353.5.5.1.3.1.10 | ColumnatmSoftPVpcRetryTimer | read-only | mandatory | Indicates the current value of the retry timer in seconds for this connection. When the value reaches zero an attempt will be made to establish the Soft PVCC. … |
| 1.3.6.1.4.1.353.5.5.1.3.1.11 | ColumnatmSoftPVpcRetryThreshold | read-write | mandatory | Indicates the number of consecutive call setup attempts for the same Soft PVPC which need to fail before the atmSoftPvcCallFailures object is incremented. A va… |
| 1.3.6.1.4.1.353.5.5.1.3.1.12 | ColumnatmSoftPVpcRetryFailures | read-only | mandatory | Indicates how many attempts to establish the connection have failed. This counter is reset whenever a connection is successfully established or the Soft PVPC i… |
| 1.3.6.1.4.1.353.5.5.1.3.1.13 | ColumnatmSoftPVpcRetryLimit | read-write | mandatory | Sets a maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the connection. If this limit i… |
| 1.3.6.1.4.1.353.5.5.1.3.1.14 | ColumnatmSoftPVpcRowStatus | read-write | mandatory | Used to create and delete an Soft PVPC. When this object is set to 'active' an attempt is made to set up the Soft PVPC. When this object has the value 'active'… |
| 1.3.6.1.4.1.353.5.5.1.4 | TableatmInterfaceSoftPvcAddressTable | not-accessible | mandatory | This table is used to configure ATM addresses at an ATM interface on this node prior to setting up Soft PVPCs or Soft PVPCs at that interface. |
| 1.3.6.1.4.1.353.5.5.1.4.1 | RowatmInterfaceSoftPvcAddressEntry | not-accessible | mandatory | ATM address entry for configuring Soft PVCCs or Soft PVPCs at an ATM interface. |
| 1.3.6.1.4.1.353.5.5.1.4.1.1 | ColumnatmInterfaceSoftPvcAddress | not-accessible | mandatory | Specifies the address that can be used to establish a Soft PVCC or Soft PVPC to this interface. |
| 1.3.6.1.4.1.353.5.5.1.4.1.2 | ColumnatmInterfaceSoftPvcAddressRowStatus | read-write | mandatory | Used to create and delete an ATM address at this interface for setting up Soft PVCCs or Soft PVPCs. |
| 1.3.6.1.4.1.353.5.5.1.5 | TableatmCurrentlyFailingSoftPVccTable | not-accessible | mandatory | A table indicating all Soft Permanent Virtual Channel Connections (Soft PVCCs) for which the atmSoftPVccRowStatus is 'active' and the atmSoftPVccOperStatus is … |
| 1.3.6.1.4.1.353.5.5.1.5.1 | RowatmCurrentlyFailingSoftPVccEntry | not-accessible | mandatory | Each entry in this table represents a Soft Permanent Virtual Channel Connection (Soft PVCC) for which the atmSoftPVccRowStatus is 'active' and the atmSoftPVccO… |
| 1.3.6.1.4.1.353.5.5.1.5.1.1 | ColumnatmCurrentlyFailingSoftPVccTimeStamp | read-only | mandatory | The time at which this Soft PVCC began to fail. |
| 1.3.6.1.4.1.353.5.5.1.6 | TableatmCurrentlyFailingSoftPVpcTable | not-accessible | mandatory | A table indicating all Soft Permanent Virtual Path Connections (Soft PVPCs) for which the atmSoftPVpcRowStatus is 'active' and the atmSoftPVpcOperStatus is oth… |
| 1.3.6.1.4.1.353.5.5.1.6.1 | RowatmCurrentlyFailingSoftPVpcEntry | not-accessible | mandatory | Each entry in this table represents a Soft Permanent Virtual Path Connection (Soft PVPC) for which the atmSoftPVpcRowStatus is 'active' and the atmSoftPVpcOper… |
| 1.3.6.1.4.1.353.5.5.1.6.1.1 | ColumnatmCurrentlyFailingSoftPVpcTimeStamp | read-only | mandatory | The time at which this Soft PVPC began to fail. |
| 1.3.6.1.4.1.37662.11 | Nodespvc | |||
| 1.3.6.1.4.1.37662.11.1 | NodespvcMIBObjects | |||
| 1.3.6.1.4.1.37662.11.1.1 | TableatmScheduledSPVpcTable | not-accessible | mandatory | The (conceptual) table used to manage scheduled Soft Permanent Virtual Path Connections (SPVPCs). The SPVPC table is applicable only to switches. |
| 1.3.6.1.4.1.37662.11.1.1.1 | RowatmScheduledSPVpcEntry | not-accessible | mandatory | Each entry in this table represents a scheduled Soft Permanent Virtual Path Connection (SPVPC) originating at a switch interface. The atmScheduledSPVpcLeafRefe… |
| 1.3.6.1.4.1.37662.11.1.1.1.1 | ColumnatmScheduledSPVpcIndex | not-accessible | mandatory | A unique value to identify this scheduled Soft Permanent VP Connection. |
| 1.3.6.1.4.1.37662.11.1.1.1.2 | ColumnatmScheduledSPVpcIfIndex | read-write | mandatory | The ifIndex value of the ATM interface for the originating side of the Soft Permanent VP connection. |
| 1.3.6.1.4.1.37662.11.1.1.1.3 | ColumnatmScheduledSPVpcVpi | read-write | mandatory | The VPI value at the ATM interfac for the originating side of the Soft Permanent VP connection. |
| 1.3.6.1.4.1.37662.11.1.1.1.4 | ColumnatmScheduledSPVpcLeafReference | read-write | mandatory | An arbitrary integer which, in the case of the source VPL having a atmVplCastType of 'point_to_multi_point_root', serves to distinguish between the multiple le… |
| 1.3.6.1.4.1.37662.11.1.1.1.5 | ColumnatmScheduledSPVpcTargetAddress | read-write | mandatory | The target Atm Address of this SPVPC. This object is only meaningful when atmScheduledSPVpcOperationIndicator is set to create(1). |
| 1.3.6.1.4.1.37662.11.1.1.1.6 | ColumnatmScheduledSPVpcTargetSelectType | read-write | mandatory | Indicates whether the target VPI value are to be used at the destination. If the value 'any' is specified, the destination switch will choose the VPI value. In… |
| 1.3.6.1.4.1.37662.11.1.1.1.7 | ColumnatmScheduledSPVpcTargetVpi | read-write | mandatory | The VPI value of the SPVPC used at the target interface.This value must be filled in when the atmScheduledSPVpcTargetSelectType is set to 'required'. This obje… |
| 1.3.6.1.4.1.37662.11.1.1.1.8 | ColumnatmScheduledSPVpcRetryInterval | read-write | mandatory | Defines the period to wait (in seconds) before attempting to establish the SPVP connection after the first failed call attempt. Zero represents an infinite int… |
| 1.3.6.1.4.1.37662.11.1.1.1.9 | ColumnatmScheduledSPVpcRetryThreshold | read-write | mandatory | Indicates the number of consecutive call setup attempts for the same Soft PVPC which need to fail before the atmSoftPvcCallFailures object is incremented. A va… |
| 1.3.6.1.4.1.37662.11.1.1.1.10 | ColumnatmScheduledSPVpcRetryLimit | read-write | mandatory | Sets a maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the connection. If this limit i… |
| 1.3.6.1.4.1.37662.11.1.1.1.11 | ColumnatmScheduledSPVpcOperationTime | read-write | mandatory | The date and time to do the operation defined in atmScheduledSPVpcOperationIndicator. |
| 1.3.6.1.4.1.37662.11.1.1.1.12 | ColumnatmScheduledSPVpcOperationIndicator | read-write | mandatory | Defines the operation to be taken at timeout. |
| 1.3.6.1.4.1.37662.11.1.1.1.13 | ColumnatmScheduledSPVpcOperStatus | read-only | mandatory | The operational status of the scheduled SPVPC object. If the operation fails at timeout is the value changed from waitingForTimeout(1) to failedAtTimeout(2). |
| 1.3.6.1.4.1.37662.11.1.1.1.14 | ColumnatmScheduledSPVpcRowStatus | read-write | mandatory | Used to schedule SPVPC operations. |
| 1.3.6.1.4.1.37662.11.1.1.1.15 | ColumnatmScheduledSPVpcUserName | read-write | mandatory | User defined name for the Soft PVPC. |
| 1.3.6.1.4.1.37662.11.1.1.1.16 | ColumnatmScheduledSPVpcProviderName | read-write | mandatory | Provider defined name for the Soft PVPC. |
| 1.3.6.1.4.1.37662.11.1.2 | TableatmScheduledSPVccTable | not-accessible | mandatory | The (conceptual) table used to manage scheduled Soft Permanent Virtual Channel Connections (SPVCCs). The SPVCC table is applicable only to switches. When a tim… |
| 1.3.6.1.4.1.37662.11.1.2.1 | RowatmScheduledSPVccEntry | not-accessible | mandatory | Each entry in this table represents a scheduled Soft Permanent Virtual Channel Connection (SPVCC) originating at a switch interface. |
| 1.3.6.1.4.1.37662.11.1.2.1.1 | ColumnatmScheduledSPVccIndex | not-accessible | mandatory | A unique value to identify this scheduled Soft Permanent VC Connection. |
| 1.3.6.1.4.1.37662.11.1.2.1.2 | ColumnatmScheduledSPVccIfIndex | read-write | mandatory | The ifIndex value of the ATM interface for the originating side of the Soft Permanent VC connection. |
| 1.3.6.1.4.1.37662.11.1.2.1.3 | ColumnatmScheduledSPVccVpi | read-write | mandatory | The VPI value at the ATM interfac for the originating side of the Soft Permanent VC connection. |
| 1.3.6.1.4.1.37662.11.1.2.1.4 | ColumnatmScheduledSPVccVci | read-write | mandatory | The VCI value at the ATM interfac for the originating side of the Soft Permanent VC connection. |
| 1.3.6.1.4.1.37662.11.1.2.1.5 | ColumnatmScheduledSPVccLeafReference | read-write | mandatory | An arbitrary integer which, in the case of the source VCL having a atmVclCastType of 'point_to_multi_point_root', serves to distinguish between the multiple le… |
| 1.3.6.1.4.1.37662.11.1.2.1.6 | ColumnatmScheduledSPVccTargetAddress | read-write | mandatory | The target Atm Address of this SPVCC. This object is only meaningful when atmScheduledSPVccOperationIndicator is set to create(1). |
| 1.3.6.1.4.1.37662.11.1.2.1.7 | ColumnatmScheduledSPVccTargetSelectType | read-write | mandatory | Indicates whether the target VPI/VCI values are to be used at the destination. If the value 'any' is specified, the destination switch will choose the VPI/VCI … |
| 1.3.6.1.4.1.37662.11.1.2.1.8 | ColumnatmScheduledSPVccTargetVpi | read-write | mandatory | The VPI value of the SPVCC used at the target interface.This value must be filled in when the atmScheduledSPVccTargetSelectType is set to 'required'. This obje… |
| 1.3.6.1.4.1.37662.11.1.2.1.9 | ColumnatmScheduledSPVccTargetVci | read-write | mandatory | The VCI value of the SPVCC used at the target interface. This value must be filled in when the atmScheduledSPVccTargetSelectType is set to 'required'. This obj… |
| 1.3.6.1.4.1.37662.11.1.2.1.10 | ColumnatmScheduledSPVccRetryInterval | read-write | mandatory | Defines the period to wait (in milliseconds) before attempting to establish the SPVC connection after the first failed call attempt. Zero represents an infinit… |
| 1.3.6.1.4.1.37662.11.1.2.1.11 | ColumnatmScheduledSPVccRetryThreshold | read-write | mandatory | Indicates the number of consecutive call setup attempts for the same Soft PVCC which need to fail before the atmSoftPvcCallFailures object is incremented. A va… |
| 1.3.6.1.4.1.37662.11.1.2.1.12 | ColumnatmScheduledSPVccRetryLimit | read-write | mandatory | Sets a maximum limit on how many consecutive unsuccessful call setup attempts can be made before stopping the attempt to set up the connection. If this limit i… |
| 1.3.6.1.4.1.37662.11.1.2.1.13 | ColumnatmScheduledSPVccOperationTime | read-write | mandatory | The date and time to do the operation defined in atmScheduledSPVccOperationIndicator. |
| 1.3.6.1.4.1.37662.11.1.2.1.14 | ColumnatmScheduledSPVccOperationIndicator | read-write | mandatory | Defines the operation to be taken at timeout. |
| 1.3.6.1.4.1.37662.11.1.2.1.15 | ColumnatmScheduledSPVccOperStatus | read-only | mandatory | The operational status of the scheduled SPVCC object. If the operation fails at timeout is the value changed from waitingForTimeout(1) to failedAtTimeout(2). |
| 1.3.6.1.4.1.37662.11.1.2.1.16 | ColumnatmScheduledSPVccRowStatus | read-write | mandatory | Used to schedule SPVCC operations. |
| 1.3.6.1.4.1.37662.11.1.2.1.17 | ColumnatmScheduledSPVccUserName | read-write | mandatory | User defined name for the Soft PVCC. |
| 1.3.6.1.4.1.37662.11.1.2.1.18 | ColumnatmScheduledSPVccProviderName | read-write | mandatory | Provider defined name for the Soft PVCC. |
| 1.3.6.1.4.1.37662.11.1.3 | ScalarspvcOperationIndicator | not-accessible | mandatory | Indicates which operation succeeded when used in spvcScheduledConnectionEvent and which operation failed when used in spvcScheduledConnectionAlarm. |
| 1.3.6.1.4.1.37662.11.1.4 | ScalaratmScheduledSPVpcIndexNext | read-only | mandatory | This object contains an appropriate value to be used for atmScheduledSPVpcIndex when creating entries in the atmScheduledSPVpcTable. The value 0 indicates that… |
| 1.3.6.1.4.1.37662.11.1.5 | ScalaratmScheduledSPVccIndexNext | read-only | mandatory | This object contains an appropriate value to be used for atmScheduledSPVccIndex when creating entries in the atmScheduledSPVccTable. The value 0 indicates that… |
| 1.3.6.1.4.1.37662.11.1.6 | TableatmSoftPVccLeafRefNextTable | not-accessible | mandatory | This table is used to get a new unique LeafRef when creating a new leaf for a point-to-multipoint Soft PVCC. |
| 1.3.6.1.4.1.37662.11.1.6.1 | RowatmSoftPVccLeafRefNextEntry | not-accessible | mandatory | This table is used to get an unique LeafRef when creating a new leaf for a point-to-multipoint Soft PVCC. The combination of ifIndex, atmVclVpi and atmVclVci s… |
| 1.3.6.1.4.1.37662.11.1.6.1.1 | ColumnatmSoftPVccLeafRefNextValue | read-only | mandatory | Next free LeafRef value for a Soft PVCC. |
| 1.3.6.1.4.1.37662.11.1.7 | TableatmSoftPVccAddTable | not-accessible | mandatory | This table is used for additional attributes for a Soft PVCC not defined in the standard MIB. |
| 1.3.6.1.4.1.37662.11.1.7.1 | RowatmSoftPVccAddEntry | not-accessible | mandatory | Each entry in this table represents additional attributes for a Soft Permanent Virtual Channel Connection (Soft PVCC) that are not defined in the standard atmS… |
| 1.3.6.1.4.1.37662.11.1.7.1.1 | ColumnatmSoftPVccAddUserName | read-write | mandatory | User defined name for the Soft PVCC. |
| 1.3.6.1.4.1.37662.11.1.7.1.2 | ColumnatmSoftPVccAddProviderName | read-write | mandatory | Provider defined name for the Soft PVCC. |
| 1.3.6.1.4.1.37662.11.1.7.1.3 | ColumnatmSoftPVccAddRowStatus | read-write | mandatory | Used to create or delete an entry in the atmSoftPVccAddTable. |
| 1.3.6.1.4.1.37662.11.1.8 | TableatmSoftPVpcAddTable | not-accessible | mandatory | This table is used for additional attributes for a Soft PVPC not defined in the standard MIB. |
| 1.3.6.1.4.1.37662.11.1.8.1 | RowatmSoftPVpcAddEntry | not-accessible | mandatory | Each entry in this table represents additional attributes for a Soft Permanent Virtual Path Connection (Soft PVPC) that are not defined in the standard atmSoft… |
| 1.3.6.1.4.1.37662.11.1.8.1.1 | ColumnatmSoftPVpcAddUserName | read-write | mandatory | User defined name for the Soft PVPC. |
| 1.3.6.1.4.1.37662.11.1.8.1.2 | ColumnatmSoftPVpcAddProviderName | read-write | mandatory | Provider defined name for the Soft PVPC. |
| 1.3.6.1.4.1.37662.11.1.8.1.3 | ColumnatmSoftPVpcAddRowStatus | read-write | mandatory | Used to create or delete an entry in the atmSoftPVpcAddTable. |
| 1.3.6.1.4.1.37662.11.1.9 | ScalaratmSpvcLatestErrorCode | read-only | mandatory | This object contains the error code generated from the latest unsuccessful set-operation towards a SPVC object. To obtain the error code value, the manager iss… |
| 1.3.6.1.4.1.37662.11.1.10 | TableatmSoftPVccTargetTable | not-accessible | mandatory | A table indicating all Soft Permanent Virtual Channel Connections (Soft PVCCs) for which the targets are defined. This table can only be added after an entry h… |
| 1.3.6.1.4.1.37662.11.1.10.1 | RowatmSoftPVccTargetEntry | not-accessible | mandatory | Each entry in this table represents a soft pvcc target. |
| 1.3.6.1.4.1.37662.11.1.10.1.1 | ColumnatmSoftPVccTargetUserName | read-write | mandatory | User defined name for the Soft PVCC. |
| 1.3.6.1.4.1.37662.11.1.10.1.2 | ColumnatmSoftPVccTargetProviderName | read-write | mandatory | Provider defined name for the Soft PVCC. |
| 1.3.6.1.4.1.37662.11.1.10.1.3 | ColumnatmSoftPVccTargetRestart | read-write | mandatory | When the value is set to 'restart' the Soft PVCC is released from target side and a new setup will be sent from originating side. As a result of this action, t… |
| 1.3.6.1.4.1.37662.11.1.10.1.4 | ColumnatmSoftPVccTargetOpState | read-only | mandatory | Describes the status of the Soft PVPC. other - none of the types specified below connected - connection or party is currently operational not_connected - conne… |
| 1.3.6.1.4.1.37662.11.1.10.1.5 | ColumnatmSoftPVccTargetRowStatus | read-write | mandatory | Used to create or delete an entry in the atmSoftPVccTargetTable. |
| 1.3.6.1.4.1.37662.11.1.11 | TableatmSoftPVpcTargetTable | not-accessible | mandatory | A table indicating all Soft Permanent Virtual Channel Connections (Soft PVPCs) for which the targets are defined. This table can only be added after an entry h… |
| 1.3.6.1.4.1.37662.11.1.11.1 | RowatmSoftPVpcTargetEntry | not-accessible | mandatory | Each entry in this table represents a soft pvcc target. |
| 1.3.6.1.4.1.37662.11.1.11.1.1 | ColumnatmSoftPVpcTargetUserName | read-write | mandatory | User defined name for the Soft PVCC. |
| 1.3.6.1.4.1.37662.11.1.11.1.2 | ColumnatmSoftPVpcTargetProviderName | read-write | mandatory | Provider defined name for the Soft PVCC. |
| 1.3.6.1.4.1.37662.11.1.11.1.3 | ColumnatmSoftPVpcTargetRestart | read-write | mandatory | When the value is set to 'restart' the Soft PVPC is released from target side and a new setup will be sent from originating side. As a result of this action, t… |
| 1.3.6.1.4.1.37662.11.1.11.1.4 | ColumnatmSoftPVpcTargetOpState | read-only | mandatory | Describes the status of the Soft PVPC. other - none of the types specified below connected - connection or party is currently operational not_connected - conne… |
| 1.3.6.1.4.1.37662.11.1.11.1.5 | ColumnatmSoftPVpcTargetRowStatus | read-write | mandatory | Used to create or delete an entry in the atmSoftPVpcTargetTable. |
| 1.3.6.1.4.1.37662.11.1004 | NodespvcScheduledConnectionAlarm | An alarm reporting an unsuccessful scheduled operation on a spvc connection. | ||
| 1.3.6.1.4.1.37662.11.1005 | NodespvcFailingAlarm | An alarm reporting that an spvc have reached the state retry-exhausted. The alarm will be cleared when there're no spvc left in retry-exhausted. | ||
| 1.3.6.1.4.1.37662.11.10001 | NodespvcAtmSoftPvcCallFailuresTrapEvent | A notification indicating that one or more series of call attempts in trying to establish a Soft PVPC or Soft PVCC have failed since the last spvcAtmSoftPvcCal… | ||
| 1.3.6.1.4.1.37662.11.10009 | NodespvcScheduledConnectionEvent | An event reporting a successful scheduled operation on a spvc connection. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AtmAddr | OCTET STRING (SIZE(0|20)) | ||
| AtmScheduledSpvcOperationIndicator | INTEGER { create(1), delete(2), restart(3) } | ||
| AtmScheduledSpvcOperStatus | INTEGER { waitingForTimeout(1), failedAtTimeout(2) } | ||
| AtmVcIdentifier | INTEGER (0..65535) | ||
| AtmVpIdentifier | INTEGER (0..4095) |