AXIS-MIB
224 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress mgmt OBJECT-TYPE TimeTicks |
| RFC1213-MIB | DisplayString PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1 | Nodemib-2 | |||
| 1.3.6.1.2.1.11 | Nodesnmp | |||
| 1.3.6.1.2.1.11.0 | NodecoldStart | A coldStart trap signifies that the sending protocol entity is reinitializing itself such that the agent's configuration or the protocol entity implementation … | ||
| 1.3.6.1.2.1.11.4 | NodeauthenticationFailure | An authenticationFailure trap signifies that the sending protocol entity is the addressee of a protocol message that is not properly authenticated. While imple… | ||
| 1.3.6.1.4.1.368 | Nodeaxis | |||
| 1.3.6.1.4.1.368.1 | Nodeproducts | |||
| 1.3.6.1.4.1.368.1 | NodetrapPrinter | A printer error has occurred. | ||
| 1.3.6.1.4.1.368.1.1 | Nodenps | |||
| 1.3.6.1.4.1.368.2 | Nodeprint-server | |||
| 1.3.6.1.4.1.368.2 | NodetrapNewIPaddr | The IP address has been changed by RARP or an 'arp -s'. | ||
| 1.3.6.1.4.1.368.2.1 | Nodestatus | |||
| 1.3.6.1.4.1.368.2.1.1 | Nodeports | |||
| 1.3.6.1.4.1.368.2.1.1.1 | ScalarportNumber | read-only | mandatory | The number of ports. |
| 1.3.6.1.4.1.368.2.1.1.2 | TableportTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.368.2.1.1.2.1 | RowportEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.368.2.1.1.2.1.1 | ColumnportIndex | read-only | mandatory | The port's number. |
| 1.3.6.1.4.1.368.2.1.1.2.1.2 | ColumnportDescr | read-only | mandatory | The port descriptor, name and type. |
| 1.3.6.1.4.1.368.2.1.1.2.1.3 | ColumnportOnLine | read-only | mandatory | The port's On-Line status. |
| 1.3.6.1.4.1.368.2.1.1.2.1.4 | ColumnportBusy | read-only | mandatory | The port's Busy status. |
| 1.3.6.1.4.1.368.2.1.1.2.1.5 | ColumnportEndOfForms | read-only | mandatory | The port's End-of-Forms status. |
| 1.3.6.1.4.1.368.2.1.1.2.1.6 | ColumnportFault | read-only | mandatory | The port's Fault status. |
| 1.3.6.1.4.1.368.2.1.1.2.1.7 | ColumnportOutputBytes | read-only | mandatory | The number of bytes sent out on the port during a printout in progress or the last printout. |
| 1.3.6.1.4.1.368.2.1.1.2.1.8 | ColumnportInputBytes | read-only | mandatory | The number of bytes received on the port during a printout in progress or the last printout. |
| 1.3.6.1.4.1.368.2.1.1.2.1.9 | ColumnportPrintouts | read-only | mandatory | The number of printouts started on the port. |
| 1.3.6.1.4.1.368.2.1.1.2.1.10 | ColumnportAvailable | read-only | mandatory | If the port is assigned for a printout. |
| 1.3.6.1.4.1.368.2.1.1.2.1.11 | ColumnportIsInput | read-only | mandatory | If the port is assigned as an input port (bidirectional). |
| 1.3.6.1.4.1.368.2.2 | Nodeadmin | |||
| 1.3.6.1.4.1.368.2.2.1 | ScalaradminUnitStatus | read-write | mandatory | The units's operational status. A other than (1) will reset the unit. |
| 1.3.6.1.4.1.368.2.2.2 | ScalaradminConfigStatus | read-write | mandatory | The units's configuration status. read-only values: (1) reserved for future use. (2) reserved for future use. write-only values : (3) will load permanent value… |
| 1.3.6.1.4.1.368.2.2.3 | ScalaradminOldIntAddr | read-only | mandatory | The Internet Address at power-on or before change by RARP or 'arp -s'. |
| 1.3.6.1.4.1.368.2.3 | Nodesetup | |||
| 1.3.6.1.4.1.368.2.3.1 | Nodeconfig | |||
| 1.3.6.1.4.1.368.2.3.1.2 | ScalarethAddr | read-only | mandatory | The Ethernet Address. |
| 1.3.6.1.4.1.368.2.3.1.7 | ScalarrootPwd | read-write | mandatory | The Root Password. |
| 1.3.6.1.4.1.368.2.3.1.8 | Scalarusers | read-write | mandatory | The User Defintions. |
| 1.3.6.1.4.1.368.2.3.1.13 | ScalarhpJetadmin | read-write | mandatory | HP JetAdmin Support. |
| 1.3.6.1.4.1.368.2.3.1.15 | ScalaraxisPrintSystem | read-write | mandatory | The AXIS Print System enable switch. |
| 1.3.6.1.4.1.368.2.3.1.17 | ScalarbaseUrl | read-write | mandatory | The base URL. |
| 1.3.6.1.4.1.368.2.3.1.60 | ScalardefOut | read-write | mandatory | Internal Printout Destination. |
| 1.3.6.1.4.1.368.2.3.2 | Nodetcpip | |||
| 1.3.6.1.4.1.368.2.3.2.1 | ScalarintAddr | read-write | mandatory | The Internet Address. |
| 1.3.6.1.4.1.368.2.3.2.3 | ScalardefRout | read-write | mandatory | The Default Router. |
| 1.3.6.1.4.1.368.2.3.2.4 | ScalarnetMask | read-write | mandatory | The Net Mask. |
| 1.3.6.1.4.1.368.2.3.2.5 | ScalartcpEnb | read-write | mandatory | The TCP protocol stack enable switch. |
| 1.3.6.1.4.1.368.2.3.2.6 | ScalartcpKey | read-write | mandatory | The TCP protocol stack enable software key. |
| 1.3.6.1.4.1.368.2.3.2.9 | ScalarprosPwd | read-write | mandatory | The PROS password. |
| 1.3.6.1.4.1.368.2.3.2.11 | ScalarprosPrt | read-write | mandatory | The PROS TCP Port. |
| 1.3.6.1.4.1.368.2.3.2.12 | ScalarlpdBanner | read-write | mandatory | The LPD banner page switch. |
| 1.3.6.1.4.1.368.2.3.2.18 | ScalarrtnOpt | read-write | mandatory | The Reverse Telnet option handling switch. |
| 1.3.6.1.4.1.368.2.3.2.601 | ScalarrTelPr1 | read-write | mandatory | The TCP port for reverse Telnet to logical printer 1. |
| 1.3.6.1.4.1.368.2.3.2.602 | ScalarrTelPr2 | read-write | mandatory | The TCP port for reverse Telnet to logical printer 2. |
| 1.3.6.1.4.1.368.2.3.2.603 | ScalarrTelPr3 | read-write | mandatory | The TCP port for reverse Telnet to logical printer 3. |
| 1.3.6.1.4.1.368.2.3.2.604 | ScalarrTelPr4 | read-write | mandatory | The TCP port for reverse Telnet to logical printer 4. |
| 1.3.6.1.4.1.368.2.3.2.605 | ScalarrTelPr5 | read-write | mandatory | The TCP port for reverse Telnet to logical printer 5. |
| 1.3.6.1.4.1.368.2.3.2.606 | ScalarrTelPr6 | read-write | mandatory | The TCP port for reverse Telnet to logical printer 6. |
| 1.3.6.1.4.1.368.2.3.2.607 | ScalarrTelPr7 | read-write | mandatory | The TCP port for reverse Telnet to logical printer 7. |
| 1.3.6.1.4.1.368.2.3.2.608 | ScalarrTelPr8 | read-write | mandatory | The TCP port for reverse Telnet to logical printer 8. |
| 1.3.6.1.4.1.368.2.3.2.670 | ScalardnsEnb | read-write | mandatory | The DNS on/off switch. |
| 1.3.6.1.4.1.368.2.3.2.671 | ScalardnsPrimaryAddr | read-write | mandatory | The Primary DNS Server Address. |
| 1.3.6.1.4.1.368.2.3.2.672 | ScalardnsSecondaryAddr | read-write | mandatory | The Secondary DNS Server Address. |
| 1.3.6.1.4.1.368.2.3.2.673 | ScalaripDomain | read-write | mandatory | The Domain Name. |
| 1.3.6.1.4.1.368.2.3.2.680 | ScalarslpScopeList | read-write | mandatory | The SLP Scope List. |
| 1.3.6.1.4.1.368.2.3.2.692 | ScalarwinsEnb | read-write | mandatory | The WINS on/off switch. |
| 1.3.6.1.4.1.368.2.3.2.693 | ScalarwinsPrimaryAddr | read-write | mandatory | The Primary WINS Server Address. |
| 1.3.6.1.4.1.368.2.3.2.694 | ScalarwinsSecondaryAddr | read-write | mandatory | The Secondary WINS Server Address. |
| 1.3.6.1.4.1.368.2.3.2.695 | ScalarnbtScopeId | read-write | mandatory | The NBT Scope ID. |
| 1.3.6.1.4.1.368.2.3.2.696 | ScalardhcpEnb | read-write | mandatory | The dhcp on/off switch. |
| 1.3.6.1.4.1.368.2.3.2.698 | ScalarbootpEnb | read-write | mandatory | The bootp on/off switch. |
| 1.3.6.1.4.1.368.2.3.2.699 | ScalarrarpEnb | read-write | mandatory | The rarp on/off switch. |
| 1.3.6.1.4.1.368.2.3.3 | Nodesnmpcontrol | |||
| 1.3.6.1.4.1.368.2.3.3.701 | ScalarreadCommunity | read-write | mandatory | The community having read-only access to all objects except WriteCommunity. |
| 1.3.6.1.4.1.368.2.3.3.702 | ScalarwriteCommunity | read-write | mandatory | The community having full access to all objects. |
| 1.3.6.1.4.1.368.2.3.3.705 | ScalartrapAddress | read-write | mandatory | The IP address to send traps to. No traps if set to 0.0.0.0 . |
| 1.3.6.1.4.1.368.2.3.3.706 | ScalartrapCommunity | read-write | mandatory | The community used when sending traps. |
| 1.3.6.1.4.1.368.2.3.3.715 | ScalarenableAuthenTraps | read-write | mandatory | Same as snmpEnableAuthenTraps in MIB-II. |
| 1.3.6.1.4.1.368.2.3.3.716 | ScalarenablePrinterTraps | read-write | mandatory | Enables the enterprise specific 'trapPrinter' traps. |
| 1.3.6.1.4.1.368.2.3.4 | Nodenetware | |||
| 1.3.6.1.4.1.368.2.3.4.400 | ScalarnetwEnb | read-write | mandatory | The NetWare protocol stack enable switch. |
| 1.3.6.1.4.1.368.2.3.4.401 | ScalarpsName | read-write | mandatory | The NetWare print server name. |
| 1.3.6.1.4.1.368.2.3.4.402 | ScalarconfServ | read-write | mandatory | The NetWare configuration file server name. |
| 1.3.6.1.4.1.368.2.3.4.405 | ScalarpsPoll | read-write | mandatory | The NetWare print server poll time. |
| 1.3.6.1.4.1.368.2.3.4.406 | ScalarautoScan | read-write | mandatory | Determines scanning mode of print server. |
| 1.3.6.1.4.1.368.2.3.4.420 | Scalarfr-802-3 | read-write | mandatory | The 802.3 frame support switch for NetWare. |
| 1.3.6.1.4.1.368.2.3.4.421 | Scalarfr-eth-2 | read-write | mandatory | The Ethernet-2 frame support switch for NetWare. |
| 1.3.6.1.4.1.368.2.3.4.422 | Scalarfr-802-2 | read-write | mandatory | The 802.2 frame support switch for NetWare. |
| 1.3.6.1.4.1.368.2.3.4.423 | Scalarfr-snap | read-write | mandatory | The SNAP frame support switch for NetWare. |
| 1.3.6.1.4.1.368.2.3.4.432 | Scalarlogin1 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.368.2.3.4.433 | Scalarlogin2 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.368.2.3.4.434 | Scalarlogin3 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.368.2.3.4.435 | Scalarlogin4 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.368.2.3.4.436 | Scalarlogin5 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.368.2.3.4.437 | Scalarlogin6 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.368.2.3.4.438 | Scalarlogin7 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.368.2.3.4.439 | Scalarlogin8 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.368.2.3.4.440 | Scalarlogin9 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.368.2.3.4.441 | Scalarlogin10 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.368.2.3.4.442 | Scalarlogin11 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.368.2.3.4.443 | Scalarlogin12 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.368.2.3.4.444 | Scalarlogin13 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.368.2.3.4.445 | Scalarlogin14 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.368.2.3.4.446 | Scalarlogin15 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.368.2.3.4.447 | Scalarlogin16 | read-write | mandatory | File server, print queue and logical printer def. . |
| 1.3.6.1.4.1.368.2.3.4.470 | Scalarrprinter1 | read-write | mandatory | Pserver name and printer number on pserver. |
| 1.3.6.1.4.1.368.2.3.4.471 | Scalarrprinter2 | read-write | mandatory | Pserver name and printer number on pserver. |
| 1.3.6.1.4.1.368.2.3.4.472 | Scalarrprinter3 | read-write | mandatory | Pserver name and printer number on pserver. |
| 1.3.6.1.4.1.368.2.3.4.473 | Scalarrprinter4 | read-write | mandatory | Pserver name and printer number on pserver. |
| 1.3.6.1.4.1.368.2.3.4.474 | Scalarrprinter5 | read-write | mandatory | Pserver name and printer number on pserver. |
| 1.3.6.1.4.1.368.2.3.4.475 | Scalarrprinter6 | read-write | mandatory | Pserver name and printer number on pserver. |
| 1.3.6.1.4.1.368.2.3.4.476 | Scalarrprinter7 | read-write | mandatory | Pserver name and printer number on pserver. |
| 1.3.6.1.4.1.368.2.3.4.477 | Scalarrprinter8 | read-write | mandatory | Pserver name and printer number on pserver. |
| 1.3.6.1.4.1.368.2.3.5 | Nodelservlmgr | |||
| 1.3.6.1.4.1.368.2.3.5.800 | ScalarlslmEnb | read-write | mandatory | The Lan Serv/Lan Mgr protocol stack enable switch. |
| 1.3.6.1.4.1.368.2.3.5.801 | ScalarlslmFrameType | read-write | mandatory | Determines which frame type to use. |
| 1.3.6.1.4.1.368.2.3.5.810 | ScalarlPrint1 | read-write | mandatory | The Lan Serv/Lan Mgr printer 1 name. |
| 1.3.6.1.4.1.368.2.3.5.811 | ScalarlLogic1 | read-write | mandatory | The Lan Serv/Lan Mgr printer 1's logical printer. |
| 1.3.6.1.4.1.368.2.3.5.820 | ScalarlPrint2 | read-write | mandatory | The Lan Serv/Lan Mgr printer 1 name. |
| 1.3.6.1.4.1.368.2.3.5.821 | ScalarlLogic2 | read-write | mandatory | The Lan Serv/Lan Mgr printer 1's logical printer. |
| 1.3.6.1.4.1.368.2.3.5.830 | ScalarlPrint3 | read-write | mandatory | The Lan Serv/Lan Mgr printer 3 name. |
| 1.3.6.1.4.1.368.2.3.5.831 | ScalarlLogic3 | read-write | mandatory | The Lan Serv/Lan Mgr printer 3's logical printer. |
| 1.3.6.1.4.1.368.2.3.5.840 | ScalarlPrint4 | read-write | mandatory | The Lan Serv/Lan Mgr printer 4 name. |
| 1.3.6.1.4.1.368.2.3.5.841 | ScalarlLogic4 | read-write | mandatory | The Lan Serv/Lan Mgr printer 4's logical printer. |
| 1.3.6.1.4.1.368.2.3.5.850 | ScalarlPrint5 | read-write | mandatory | The Lan Serv/Lan Mgr printer 5 name. |
| 1.3.6.1.4.1.368.2.3.5.851 | ScalarlLogic5 | read-write | mandatory | The Lan Serv/Lan Mgr printer 5's logical printer. |
| 1.3.6.1.4.1.368.2.3.5.860 | ScalarlPrint6 | read-write | mandatory | The Lan Serv/Lan Mgr printer 6 name. |
| 1.3.6.1.4.1.368.2.3.5.861 | ScalarlLogic6 | read-write | mandatory | The Lan Serv/Lan Mgr printer 6's logical printer. |
| 1.3.6.1.4.1.368.2.3.5.870 | ScalarlPrint7 | read-write | mandatory | The Lan Serv/Lan Mgr printer 7 name. |
| 1.3.6.1.4.1.368.2.3.5.871 | ScalarlLogic7 | read-write | mandatory | The Lan Serv/Lan Mgr printer 7's logical printer. |
| 1.3.6.1.4.1.368.2.3.5.880 | ScalarlPrint8 | read-write | mandatory | The Lan Serv/Lan Mgr printer 8 name. |
| 1.3.6.1.4.1.368.2.3.5.881 | ScalarlLogic8 | read-write | mandatory | The Lan Serv/Lan Mgr printer 8's logical printer. |
| 1.3.6.1.4.1.368.2.3.6 | Nodeapple | |||
| 1.3.6.1.4.1.368.2.3.6.500 | ScalaratlkEnb | read-write | mandatory | The AppleTalk protocol stack enable switch. |
| 1.3.6.1.4.1.368.2.3.6.501 | ScalaratlkKey | read-write | mandatory | The AppleTalk protocol stack software key. |
| 1.3.6.1.4.1.368.2.3.6.502 | ScalaratlkZone | read-write | mandatory | The AppleTalk zone name. |
| 1.3.6.1.4.1.368.2.3.6.503 | ScalaratlkHPZoner | read-write | mandatory | Enable/Disable support for HP Zoner. |
| 1.3.6.1.4.1.368.2.3.6.504 | ScalaratlkFont | read-write | mandatory | How to respond to a FontListQuery. |
| 1.3.6.1.4.1.368.2.3.6.505 | ScalaratlkBinary | read-write | mandatory | Support binary files or not. |
| 1.3.6.1.4.1.368.2.3.6.506 | ScalaratlkBinaryType | read-write | mandatory | Specifies which Binary Communications Protocol to use. |
| 1.3.6.1.4.1.368.2.3.6.510 | ScalaraPrint1 | read-write | mandatory | The AppleTalk printer 1 name. |
| 1.3.6.1.4.1.368.2.3.6.511 | ScalaraType1 | read-write | mandatory | The AppleTalk printer 1 type. |
| 1.3.6.1.4.1.368.2.3.6.512 | ScalaraLogic1 | read-write | mandatory | The AppleTalk printer 1's logical printer. |
| 1.3.6.1.4.1.368.2.3.6.513 | ScalaraBinaryType1 | read-write | mandatory | Specifies which Binary Communications Protocol to use for AppleTalk printer 1. |
| 1.3.6.1.4.1.368.2.3.6.520 | ScalaraPrint2 | read-write | mandatory | The AppleTalk printer 2 name. |
| 1.3.6.1.4.1.368.2.3.6.521 | ScalaraType2 | read-write | mandatory | The AppleTalk printer 2 type. |
| 1.3.6.1.4.1.368.2.3.6.522 | ScalaraLogic2 | read-write | mandatory | The AppleTalk printer 2's logical printer. |
| 1.3.6.1.4.1.368.2.3.6.523 | ScalaraBinaryType2 | read-write | mandatory | Specifies which Binary Communications Protocol to use for AppleTalk printer 2. |
| 1.3.6.1.4.1.368.2.3.6.530 | ScalaraPrint3 | read-write | mandatory | The AppleTalk printer 3 name. |
| 1.3.6.1.4.1.368.2.3.6.531 | ScalaraType3 | read-write | mandatory | The AppleTalk printer 3 type. |
| 1.3.6.1.4.1.368.2.3.6.532 | ScalaraLogic3 | read-write | mandatory | The AppleTalk printer 3's logical printer. |
| 1.3.6.1.4.1.368.2.3.6.533 | ScalaraBinaryType3 | read-write | mandatory | Specifies which Binary Communications Protocol to use for AppleTalk printer 3. |
| 1.3.6.1.4.1.368.2.3.7 | Nodelogicals | |||
| 1.3.6.1.4.1.368.2.3.7.1 | ScalarlogPrNumber | read-only | mandatory | The number of logical printers. |
| 1.3.6.1.4.1.368.2.3.7.2 | TablelogPrTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.368.2.3.7.2.1 | RowlogPrEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.368.2.3.7.2.1.1 | ColumnlogPrIndex | read-only | mandatory | The logical printer's number. |
| 1.3.6.1.4.1.368.2.3.7.2.1.2 | ColumnlogPrOut | read-write | mandatory | The logical printer's output port. |
| 1.3.6.1.4.1.368.2.3.7.2.1.3 | ColumnlogPrScnd | read-write | mandatory | The logical printer's secondary output port. |
| 1.3.6.1.4.1.368.2.3.7.2.1.4 | ColumnlogPrWait | read-write | mandatory | The logical printer's wait for printer available switch. |
| 1.3.6.1.4.1.368.2.3.7.2.1.5 | ColumnlogPrIn | read-write | mandatory | The logical printer's input port. If set to auto, the Print Server will try to use the port specified as output port for both output and input. |
| 1.3.6.1.4.1.368.2.3.7.2.1.7 | ColumnlogPrBef | read-write | mandatory | The logical printer's string-before-job. |
| 1.3.6.1.4.1.368.2.3.7.2.1.8 | ColumnlogPrStr | read-write | mandatory | The logical printer's string-to-string substitution defs. |
| 1.3.6.1.4.1.368.2.3.7.2.1.10 | ColumnlogPrCset | read-write | mandatory | The logical printer's character set conversion table. |
| 1.3.6.1.4.1.368.2.3.7.2.1.11 | ColumnlogPrFilt | read-write | mandatory | The logical printer's data stream filter. |
| 1.3.6.1.4.1.368.2.3.7.2.1.12 | ColumnlogPrAft | read-write | mandatory | The logical printer's string-after-job. |
| 1.3.6.1.4.1.368.2.3.7.2.1.14 | ColumnlogPrDump | read-write | mandatory | The logical printer's hexdump filter. |
| 1.3.6.1.4.1.368.2.3.7.2.1.17 | ColumnlogPrSize | read-write | mandatory | The logical printer's ASCII-to-PostScript conversion page size. |
| 1.3.6.1.4.1.368.2.3.7.2.1.18 | ColumnlogPrOrnt | read-write | mandatory | The logical printer's ASCII-to-PostScript conversion page orientation. |
| 1.3.6.1.4.1.368.2.3.7.2.1.19 | ColumnlogPrForm | read-write | mandatory | The logical printer's ASCII-to-PostScript conversion page format. |
| 1.3.6.1.4.1.368.2.3.7.2.1.20 | ColumnlogPrFont | read-write | mandatory | The logical printer's PostScript font. |
| 1.3.6.1.4.1.368.2.3.8 | Nodeoutput | |||
| 1.3.6.1.4.1.368.2.3.8.20 | ScalarcentrLPT1 | read-write | mandatory | The LPT1 port speed. |
| 1.3.6.1.4.1.368.2.3.8.21 | ScalarbsyTimLPT1 | read-write | mandatory | The LPT1 busy time-out. |
| 1.3.6.1.4.1.368.2.3.8.22 | ScalarmgmInfoLPT1 | read-write | mandatory | Get management information on LPT1. |
| 1.3.6.1.4.1.368.2.3.8.23 | ScalarcomLPT1 | read-write | mandatory | Printer comment for printer on LPT1. |
| 1.3.6.1.4.1.368.2.3.8.24 | ScalarbidirLPT1 | read-write | mandatory | LPT1 bidirectional control. |
| 1.3.6.1.4.1.368.2.3.8.27 | ScalarreadTimCOM1 | read-write | mandatory | The COM1 input time-out. |
| 1.3.6.1.4.1.368.2.3.8.29 | ScalarhandshCOM1 | read-write | mandatory | The COM1 handshake mode. |
| 1.3.6.1.4.1.368.2.3.8.30 | ScalarbaudrCOM1 | read-write | mandatory | The COM1 baudrate. The settings b57600 and b115200 are not valid for all products, please refer to the corresponding User Manual. |
| 1.3.6.1.4.1.368.2.3.8.31 | ScalarstopBitsCOM1 | read-write | mandatory | The COM1 no of stopbits. |
| 1.3.6.1.4.1.368.2.3.8.32 | ScalarparityCOM1 | read-write | mandatory | The COM1 no of parity bits. |
| 1.3.6.1.4.1.368.2.3.8.33 | ScalarnoBitsCOM1 | read-write | mandatory | The COM1 no of bits. |
| 1.3.6.1.4.1.368.2.3.8.34 | ScalarbsyTimCOM1 | read-write | mandatory | The COM1 busy time-out. |
| 1.3.6.1.4.1.368.2.3.8.35 | ScalarmgmInfoCOM1 | read-write | mandatory | Get management information on COM1. |
| 1.3.6.1.4.1.368.2.3.8.36 | ScalarcomCOM1 | read-write | mandatory | Printer comment for printer on COM1. |
| 1.3.6.1.4.1.368.2.3.8.40 | ScalarcentrLPT2 | read-write | mandatory | The LPT2 port speed. |
| 1.3.6.1.4.1.368.2.3.8.41 | ScalarbsyTimLPT2 | read-write | mandatory | The LPT2 busy time-out. |
| 1.3.6.1.4.1.368.2.3.8.42 | ScalarmgmInfoLPT2 | read-write | mandatory | Get management information on LPT2. |
| 1.3.6.1.4.1.368.2.3.8.43 | ScalarcomLPT2 | read-write | mandatory | Printer comment for printer on LPT2. |
| 1.3.6.1.4.1.368.2.3.8.44 | ScalarbidirLPT2 | read-write | mandatory | LPT2 bidirectional control. |
| 1.3.6.1.4.1.368.2.3.9 | Nodepanel | |||
| 1.3.6.1.4.1.368.2.3.10 | Nodends-netware | |||
| 1.3.6.1.4.1.368.2.3.10.900 | Scalarnds-netwEnb | read-write | mandatory | The NetWare protocol stack enable switch. |
| 1.3.6.1.4.1.368.2.3.10.901 | Scalarnds-psName | read-write | mandatory | The print server name. |
| 1.3.6.1.4.1.368.2.3.10.902 | Scalarnds-netwProt | read-write | mandatory | The NetWare protocol switch. |
| 1.3.6.1.4.1.368.2.3.10.910 | Scalarnds-fr-802-3 | read-write | mandatory | The 802.3 frame support switch for NetWare. |
| 1.3.6.1.4.1.368.2.3.10.911 | Scalarnds-fr-eth-2 | read-write | mandatory | The Ethernet-2 frame support switch for NetWare. |
| 1.3.6.1.4.1.368.2.3.10.912 | Scalarnds-fr-802-2 | read-write | mandatory | The 802.2 frame support switch for NetWare. |
| 1.3.6.1.4.1.368.2.3.10.913 | Scalarnds-fr-snap | read-write | mandatory | The SNAP frame support switch for NetWare. |
| 1.3.6.1.4.1.368.2.3.10.920 | ScalarjobCheckDelay | read-write | mandatory | Print queue polling interval. |
| 1.3.6.1.4.1.368.2.3.10.921 | ScalarconfCheckDelay | read-write | mandatory | Configuration scanning interval. |
| 1.3.6.1.4.1.368.2.3.10.926 | ScalarpserverNDS | read-write | mandatory | Initial file server and NDS print server name. |
| 1.3.6.1.4.1.368.2.3.10.930 | ScalarpserverBindery1 | read-write | mandatory | Bindery file server. |
| 1.3.6.1.4.1.368.2.3.10.931 | ScalarpserverBindery2 | read-write | mandatory | Bindery file server. |
| 1.3.6.1.4.1.368.2.3.10.932 | ScalarpserverBindery3 | read-write | mandatory | Bindery file server. |
| 1.3.6.1.4.1.368.2.3.10.933 | ScalarpserverBindery4 | read-write | mandatory | Bindery file server. |
| 1.3.6.1.4.1.368.2.3.10.934 | ScalarpserverBindery5 | read-write | mandatory | Bindery file server. |
| 1.3.6.1.4.1.368.2.3.10.935 | ScalarpserverBindery6 | read-write | mandatory | Bindery file server. |
| 1.3.6.1.4.1.368.2.3.10.936 | ScalarpserverBindery7 | read-write | mandatory | Bindery file server. |
| 1.3.6.1.4.1.368.2.3.10.937 | ScalarpserverBindery8 | read-write | mandatory | Bindery file server. |
| 1.3.6.1.4.1.368.2.3.10.938 | ScalarpserverBindery9 | read-write | mandatory | Bindery file server. |
| 1.3.6.1.4.1.368.2.3.10.939 | ScalarpserverBindery10 | read-write | mandatory | Bindery file server. |
| 1.3.6.1.4.1.368.2.3.10.940 | ScalarpserverBindery11 | read-write | mandatory | Bindery file server. |
| 1.3.6.1.4.1.368.2.3.10.941 | ScalarpserverBindery12 | read-write | mandatory | Bindery file server. |
| 1.3.6.1.4.1.368.2.3.10.942 | ScalarpserverBindery13 | read-write | mandatory | Bindery file server. |
| 1.3.6.1.4.1.368.2.3.10.943 | ScalarpserverBindery14 | read-write | mandatory | Bindery file server. |
| 1.3.6.1.4.1.368.2.3.10.944 | ScalarpserverBindery15 | read-write | mandatory | Bindery file server. |
| 1.3.6.1.4.1.368.2.3.10.945 | ScalarpserverBindery16 | read-write | mandatory | Bindery file server. |
| 1.3.6.1.4.1.368.2.3.10.970 | Scalarnprinter1 | read-write | mandatory | Pserver name and slot number on pserver. |
| 1.3.6.1.4.1.368.2.3.10.971 | Scalarnprinter2 | read-write | mandatory | Pserver name and slot number on pserver. |
| 1.3.6.1.4.1.368.2.3.10.972 | Scalarnprinter3 | read-write | mandatory | Pserver name and slot number on pserver. |
| 1.3.6.1.4.1.368.2.3.10.973 | Scalarnprinter4 | read-write | mandatory | Pserver name and slot number on pserver. |
| 1.3.6.1.4.1.368.2.3.10.974 | Scalarnprinter5 | read-write | mandatory | Pserver name and slot number on pserver. |
| 1.3.6.1.4.1.368.2.3.10.975 | Scalarnprinter6 | read-write | mandatory | Pserver name and slot number on pserver. |
| 1.3.6.1.4.1.368.2.3.10.976 | Scalarnprinter7 | read-write | mandatory | Pserver name and slot number on pserver. |
| 1.3.6.1.4.1.368.2.3.10.977 | Scalarnprinter8 | read-write | mandatory | Pserver name and slot number on pserver. |