Adapter-1030-MIB
93 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3582 | Nodelsi | |||
| 1.3.6.1.4.1.3582.2 | NodelsiRAID | |||
| 1.3.6.1.4.1.3582.2.2 | Nodec1030 | |||
| 1.3.6.1.4.1.3582.2.2.1 | NodelsiAdapter | |||
| 1.3.6.1.4.1.3582.2.2.1.1 | ScalaradpNumber | read-only | mandatory | The present number of rows in the adapter table. |
| 1.3.6.1.4.1.3582.2.2.1.2 | TableadapterTable | not-accessible | optional | A List of adapter Entries containing Information/Properties about the adapters on the Controller. |
| 1.3.6.1.4.1.3582.2.2.1.2.1 | RowadapterEntry | not-accessible | mandatory | An Entry in the adapter table. |
| 1.3.6.1.4.1.3582.2.2.1.2.1.1 | ColumnadapterID | read-only | optional | AdapterID for this Adapter.(Unique) |
| 1.3.6.1.4.1.3582.2.2.1.2.1.2 | ColumnnumLogicalDrives | read-only | optional | Number of Logical Drives Configured on this Adapter. |
| 1.3.6.1.4.1.3582.2.2.1.2.1.3 | ColumninitiatorID | read-only | optional | SCSI ID for this Adapter. |
| 1.3.6.1.4.1.3582.2.2.1.2.1.4 | ColumnfirmwareVersion | read-only | optional | The Firmware Version of the Firmware running on this adapter. |
| 1.3.6.1.4.1.3582.2.2.1.2.1.5 | ColumnbiosVersion | read-only | optional | The Bios Version of the BIOS Present in the Flash ROM on this adapter. |
| 1.3.6.1.4.1.3582.2.2.1.2.1.6 | ColumnsubsystemId | read-only | optional | The PCI sub system ID of this adapter |
| 1.3.6.1.4.1.3582.2.2.1.2.1.7 | ColumnsubsystemVendorId | read-only | optional | The PCI sub system vendor ID of this adapter |
| 1.3.6.1.4.1.3582.2.2.1.2.1.8 | ColumnproductName | read-only | optional | The enriched formation of the adapter retrieved from the firmware |
| 1.3.6.1.4.1.3582.2.2.1.2.1.9 | ColumndriverVersion | read-only | optional | The version of the driver |
| 1.3.6.1.4.1.3582.2.2.1.2.1.10 | ColumnspinupDelay | read-only | optional | This is the Spinup Delay for Spinning Up Physical Drives at Firmware Initialization Time. |
| 1.3.6.1.4.1.3582.2.2.1.2.1.11 | ColumnadapterType | read-only | optional | Type of the adapter. |
| 1.3.6.1.4.1.3582.2.2.1.2.1.12 | ColumnnumDevices | read-only | optional | No of devices attached to the adapter |
| 1.3.6.1.4.1.3582.2.2.2 | NodelsiLogicalDrive | |||
| 1.3.6.1.4.1.3582.2.2.2.1 | ScalarldNumber | read-only | mandatory | The present number of rows in the ld table. |
| 1.3.6.1.4.1.3582.2.2.2.2 | TablelogicaldriveTable | not-accessible | optional | A List of Logical Drive Entries containing Information/Properties about the Logical Drives Configured in the System. |
| 1.3.6.1.4.1.3582.2.2.2.2.1 | RowlogicaldriveEntry | not-accessible | optional | An Entry in the Logical Drive Table. |
| 1.3.6.1.4.1.3582.2.2.2.2.1.1 | ColumnlogicalDriveID | read-only | optional | Logical Drive ID for this Logical Drive Entry(Unique). |
| 1.3.6.1.4.1.3582.2.2.2.2.1.2 | ColumnldAdapterID | read-only | optional | The Adapter ID for this Instance of Adapter/LogicalDrive object. |
| 1.3.6.1.4.1.3582.2.2.2.2.1.3 | ColumnldState | read-only | optional | The State of this Logical Drive. |
| 1.3.6.1.4.1.3582.2.2.2.2.1.4 | ColumnldStatus | read-write | optional | The Status of this Logical Drive. |
| 1.3.6.1.4.1.3582.2.2.2.2.1.5 | ColumnsizeInMB | read-only | optional | The Configured Size of this Logical Drive. |
| 1.3.6.1.4.1.3582.2.2.2.2.1.6 | ColumnraidLevel | read-only | optional | Configured Raid Level for this Logical Drive. |
| 1.3.6.1.4.1.3582.2.2.2.2.1.7 | ColumnstripeSize | read-only | optional | Configured Stripe Size for this Logical Drive in KB. |
| 1.3.6.1.4.1.3582.2.2.2.2.1.8 | ColumnnumberOfStripes | read-only | optional | Configured Number of Stripes for this Logical Drive. |
| 1.3.6.1.4.1.3582.2.2.2.2.1.9 | ColumnresyncProgress | read-only | optional | RESYNCHRONIZATION Progress for this Logical Drive. |
| 1.3.6.1.4.1.3582.2.2.2.2.1.10 | ColumnphysicalDrvs | read-only | optional | Physical drive id(s) which are part of this LD. |
| 1.3.6.1.4.1.3582.2.2.2.2.1.11 | Columnquiesced | read-write | optional | Physical Disk I/O for this Logical Drive are quiesced or not. |
| 1.3.6.1.4.1.3582.2.2.2.2.1.12 | ColumnsparepoolIDs | read-only | optional | Spare pool id(s) which are associated with this LD. |
| 1.3.6.1.4.1.3582.2.2.3 | NodelsiDevice | |||
| 1.3.6.1.4.1.3582.2.2.3.1 | ScalarpdNumber | read-only | mandatory | The present number of rows in the device table. |
| 1.3.6.1.4.1.3582.2.2.3.2 | TabledeviceTable | not-accessible | optional | A List of Physical Device Entries containing Information about the Physical Devices in the System. |
| 1.3.6.1.4.1.3582.2.2.3.2.1 | RowdeviceEntry | not-accessible | optional | An Entry in the Device Table. |
| 1.3.6.1.4.1.3582.2.2.3.2.1.1 | ColumnphysDevID | read-only | optional | The unique Device ID |
| 1.3.6.1.4.1.3582.2.2.3.2.1.2 | ColumnphysAdapterID | read-only | optional | The Adapter ID for this Instance of Adapter/Device Instance. |
| 1.3.6.1.4.1.3582.2.2.3.2.1.3 | ColumntargetID | read-only | optional | SCSI Target ID at which this Device is present. |
| 1.3.6.1.4.1.3582.2.2.3.2.1.4 | Columnbus | read-only | optional | BUS at which this Device is present. |
| 1.3.6.1.4.1.3582.2.2.3.2.1.5 | Columnlun | read-only | optional | Logical Unit ID at which this Device is present. |
| 1.3.6.1.4.1.3582.2.2.3.2.1.6 | ColumnlogicalDriveNumber | read-only | optional | Logical drive where this Device is present. -1 in case it is not part of any LD. |
| 1.3.6.1.4.1.3582.2.2.3.2.1.7 | Columnstate | read-only | optional | Current State of this Device. |
| 1.3.6.1.4.1.3582.2.2.3.2.1.8 | ColumnsizeMB | read-only | optional | Actual Size of this Device in Mega Byte(1024*1024 bytes). |
| 1.3.6.1.4.1.3582.2.2.3.2.1.9 | ColumndeviceType | read-only | optional | Type of this Device. |
| 1.3.6.1.4.1.3582.2.2.3.2.1.10 | ColumnscsiLevel | read-only | optional | ANSI SCSI Level Conformance of this Device. |
| 1.3.6.1.4.1.3582.2.2.3.2.1.11 | ColumnrebuildProgress | read-only | optional | Rebuild Progress(% Completed) for this Physical Drive if the Physical Drive State is Rebuild. |
| 1.3.6.1.4.1.3582.2.2.3.2.1.12 | ColumnerrorCount | read-only | optional | No of errors occurred on this Drive Since it was Configured. This is applicable if the physical disk is part of a Logical drive |
| 1.3.6.1.4.1.3582.2.2.3.2.1.13 | ColumntransferSpeed | read-only | optional | Data transfer rate. |
| 1.3.6.1.4.1.3582.2.2.3.2.1.14 | ColumntransferWidth | read-only | optional | Data transfer width. |
| 1.3.6.1.4.1.3582.2.2.3.2.1.15 | Columnvendor | read-only | optional | Vendor Identification of the device. |
| 1.3.6.1.4.1.3582.2.2.3.2.1.16 | ColumnproductID | read-only | optional | Product Identification of the device. |
| 1.3.6.1.4.1.3582.2.2.3.2.1.17 | ColumnproductRev | read-only | optional | Product Revision Level of the device. |
| 1.3.6.1.4.1.3582.2.2.3.2.1.18 | ColumnphysSpID | read-only | optional | Spare pool membership ID. If not a member then it will be -1. |
| 1.3.6.1.4.1.3582.2.2.4 | NodelsiSparePool | |||
| 1.3.6.1.4.1.3582.2.2.4.1 | ScalarspNumber | read-only | mandatory | The present number of rows in the device table. |
| 1.3.6.1.4.1.3582.2.2.4.2 | TablesparepoolTable | not-accessible | mandatory | A List of Spare Pool Entries containing Information about the sparepools in the System. |
| 1.3.6.1.4.1.3582.2.2.4.2.1 | RowsparepoolEntry | not-accessible | mandatory | An Entry in the SparePool Table. |
| 1.3.6.1.4.1.3582.2.2.4.2.1.1 | ColumnspID | read-only | optional | The unique Sparepool ID |
| 1.3.6.1.4.1.3582.2.2.4.2.1.2 | ColumnldIDs | read-only | optional | The Logical Drive ID(s) where this pool is associated. |
| 1.3.6.1.4.1.3582.2.2.4.2.1.3 | ColumnnoPhyDrvs | read-only | optional | The number of drives attached to this pool. |
| 1.3.6.1.4.1.3582.2.2.4.2.1.4 | ColumndrvIDs | read-only | optional | The physical Drive ID(s) which are associated with this sparepool. |
| 1.3.6.1.4.1.3582.2.2.5 | NoderaidTraps | |||
| 1.3.6.1.4.1.3582.2.2.5.1001 | ScalarrtAdapterNumber | read-only | optional | Adapter ID for which Trap is generated. |
| 1.3.6.1.4.1.3582.2.2.5.1002 | ScalarrtLogicalDriveNumber | read-only | optional | Logical Drive Number for which Trap is generated. |
| 1.3.6.1.4.1.3582.2.2.5.1003 | ScalarrtTargetID | read-only | optional | Device ID of the Physical Drive for which Trap is Generated. |
| 1.3.6.1.4.1.3582.2.2.5.1004 | ScalarrtOldDriveState | read-only | optional | Old State of Logical/Physical Drive, when a State Change Trap is Generated. |
| 1.3.6.1.4.1.3582.2.2.5.1005 | ScalarrtNewDriveState | read-only | optional | New State of Logical/Physical Drive, when a State Change Trap is Generated. |
| 1.3.6.1.4.1.3582.2.2.5.1006 | ScalarrtSenseKey | read-only | optional | Check Condition Sense-Key reported by Physical Drive for which Trap is Generated. |
| 1.3.6.1.4.1.3582.2.2.5.1007 | ScalarrtASC | read-only | optional | Check Condition Additional Sense Code (ASC) reported by Physical Drive for which Trap is Generated. |
| 1.3.6.1.4.1.3582.2.2.5.1008 | ScalarrtASCQ | read-only | optional | Check Condition Additional Sense Code Qualifier (ASCQ) reported by Physical Drive for which Trap is Generated. |
| 1.3.6.1.4.1.3582.2.2.5.1009 | ScalarrtLUN | read-only | optional | LUN for which Trap is Generated. |
| 1.3.6.1.4.1.3582.2.2.5.1010 | ScalarrtProduct | read-only | optional | Product name for which Trap is Generated. |
| 1.3.6.1.4.1.3582.2.2.5.1011 | ScalarrtVendor | read-only | optional | Vendor name for which Trap is Generated. |
| 1.3.6.1.4.1.3582.2.2.5.1012 | ScalarrtSMART | read-only | optional | Sense information for which Trap is Generated. |
| 1.3.6.1.4.1.3582.2.2.5.1013 | ScalarrtOldDriveStatus | read-only | optional | Old Status of LogicalDrive, when a Status Change Trap is Generated. |
| 1.3.6.1.4.1.3582.2.2.5.1014 | ScalarrtNewDriveStatus | read-only | optional | New Status of Logical Drive, when a Status Change Trap is Generated. |
| 1.3.6.1.4.1.3582.2.2.5.9001 | NodertConfigUpdated | Adapter-%d: A New Configuration has been written. | ||
| 1.3.6.1.4.1.3582.2.2.5.9002 | NodertPhysicalDriveStateChange | Adapter-%d, Target-%d: Drive State Changed from %s to %s. | ||
| 1.3.6.1.4.1.3582.2.2.5.9003 | NodertLogicalDriveStateChange | Adapter-%d, Logical Drive-%d: State Changed from %s to %s. | ||
| 1.3.6.1.4.1.3582.2.2.5.9004 | NodertResyncStarted | Adapter-%d, Logical Drive-%d: Resynchronization Started. | ||
| 1.3.6.1.4.1.3582.2.2.5.9005 | NodertResyncCompleted | Adapter-%d, Logical Drive-%d: Resynchronization Completed Successfully. | ||
| 1.3.6.1.4.1.3582.2.2.5.9006 | NodertNewDriveInserted | Adapter-%d, Target-%d: New Device Inserted. | ||
| 1.3.6.1.4.1.3582.2.2.5.9007 | NodertDeviceFailed | Adapter-%d, Target-%d: Device Removed/Failed. | ||
| 1.3.6.1.4.1.3582.2.2.6 | NodeversionInfo | |||
| 1.3.6.1.4.1.3582.2.2.6.1 | ScalarmibRevMajor | read-only | mandatory | The major revision level of the MIB |
| 1.3.6.1.4.1.3582.2.2.6.2 | ScalarmibRevMinor | read-only | mandatory | The minor revision level of the MIB |
| 1.3.6.1.4.1.3582.2.2.6.3 | ScalaragentModuleName | read-only | mandatory | The module name |
| 1.3.6.1.4.1.3582.2.2.6.4 | ScalaragentModuleVersion | read-only | mandatory | The module version in xx.yy.zz format. Where xx is the major version number and yy is the minor version number and zz is the release version number. |
| 1.3.6.1.4.1.3582.2.2.6.5 | ScalarreleaseDate | read-only | mandatory | Module Release Date |