Amperion-MIB
277 objects
Amperion Inc. private MIB
Imported Objects
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Opaque TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.13995 | Identityamperion | Amperion Inc. private MIB | ||
| 1.3.6.1.4.1.13995.1 | Nodeds2 | |||
| 1.3.6.1.4.1.13995.1.1 | Nodepowerline | |||
| 1.3.6.1.4.1.13995.1.1.1 | NodeplMibIIExtension | |||
| 1.3.6.1.4.1.13995.1.1.1.2 | NodeplCards | |||
| 1.3.6.1.4.1.13995.1.1.1.2.1 | ScalarplCdNumber | read-only | current | Number of Cards available. Maximum index of plCdTable |
| 1.3.6.1.4.1.13995.1.1.1.2.2 | TableplCdTable | not-accessible | current | Powerline Cards Table. List of attributes of each Card available in the System. Indexed by the number of the Card (from 1 to plCdNumber). |
| 1.3.6.1.4.1.13995.1.1.1.2.2.1 | RowplCdEntry | not-accessible | current | Row of table plCdTable |
| 1.3.6.1.4.1.13995.1.1.1.2.2.1.1 | ColumnplCdIndex | not-accessible | current | Number of powerline card. Maximum: plCdNumber |
| 1.3.6.1.4.1.13995.1.1.1.2.2.1.2 | ColumnplCdType | read-only | current | Type of card: 0 => HE 1 => CPE |
| 1.3.6.1.4.1.13995.1.1.1.2.2.1.3 | ColumnplCdLink | read-write | current | Type of link: 1 => Link 1 2 => Link 2 3 => Link 3 4 => Link 4 5 => Link 5 6 => Link 6 |
| 1.3.6.1.4.1.13995.1.1.1.2.2.1.4 | ColumnplCdShortMacAddress | read-write | current | Short MAC Address of the Card |
| 1.3.6.1.4.1.13995.1.1.1.2.2.1.5 | ColumnplCdLongMacAddress | read-only | current | Long MAC Address of the Card |
| 1.3.6.1.4.1.13995.1.1.1.2.2.1.6 | ColumnplCdHardwareVersion | read-only | current | Hardware Version |
| 1.3.6.1.4.1.13995.1.1.1.2.2.1.7 | ColumnplCdFirmwareVersion | read-only | current | Firmware Version |
| 1.3.6.1.4.1.13995.1.1.1.2.2.1.8 | ColumnplCdDriverVersion | read-only | current | Driver Version |
| 1.3.6.1.4.1.13995.1.1.1.2.2.1.9 | ColumnplCdReset | read-write | current | Reset to Saved Values. Soft Reset. |
| 1.3.6.1.4.1.13995.1.1.1.2.2.1.10 | ColumnplCdFactoryReset | read-write | current | Reset to factory values. Hard Reset. |
| 1.3.6.1.4.1.13995.1.1.1.2.2.1.11 | ColumnplCdSaveAsPermanent | read-write | current | Save MIB values as default values: the information of the Remote List (long MAC address and short MAC address of each user) is saved and will be restored after… |
| 1.3.6.1.4.1.13995.1.1.1.2.2.1.12 | ColumnplCdStatus | read-only | current | Status related to the interface: 0 => OK. |
| 1.3.6.1.4.1.13995.1.1.1.2.2.1.13 | ColumnplCdRemoteList | read-only | current | List of Long MAC Address that can be connected with HE (only HE). Returns a string with the list of long MAC address (not separated by spaces) |
| 1.3.6.1.4.1.13995.1.1.1.2.2.1.14 | ColumnplCdNumRemoteList | read-only | current | Number of CPE in remote list (only HE). This is the maximum value for cpeId in Network table. |
| 1.3.6.1.4.1.13995.1.1.2 | NodeplNetwork | |||
| 1.3.6.1.4.1.13995.1.1.2.1 | TableplNetTable | not-accessible | current | Network Topology. Indexed by number of card and number of remote user (.plCdIndex.cpeId). Maximum values for indexes: plCdNumber and plCdNumRemoteList. Only av… |
| 1.3.6.1.4.1.13995.1.1.2.1.1 | RowplNetEntry | not-accessible | current | Row of table plNetTable |
| 1.3.6.1.4.1.13995.1.1.2.1.1.1 | ColumnplNetShortMacAddress | not-accessible | current | SMAC of remote CPE. |
| 1.3.6.1.4.1.13995.1.1.2.1.1.3 | ColumnplNetLongMacAddress | read-create | current | Long Mac Address of Remote Node. |
| 1.3.6.1.4.1.13995.1.1.2.1.1.8 | ColumnplNetRowStatus | read-create | current | Row Status |
| 1.3.6.1.4.1.13995.1.1.3 | NodeplTransmission | |||
| 1.3.6.1.4.1.13995.1.1.3.2 | TableplInpTable | not-accessible | current | Input Channel Table. Common input characteristics. Indexed by number of card. Maximum value of index: plCdNumber |
| 1.3.6.1.4.1.13995.1.1.3.2.1 | RowplInpEntry | not-accessible | current | Row of table plInpTable |
| 1.3.6.1.4.1.13995.1.1.3.2.1.1 | ColumnplInpTotalOctets | read-only | current | Total number of rx octets (including FEC overhead) |
| 1.3.6.1.4.1.13995.1.1.3.2.1.2 | ColumnplInpGain | read-write | current | Reception gain |
| 1.3.6.1.4.1.13995.1.1.3.2.1.3 | ColumnplInpAGC | read-write | current | To enable or disable Adaptive Rx Gain Control. 0 => AGC disabled 1 => AGC enabled. |
| 1.3.6.1.4.1.13995.1.1.3.2.1.4 | ColumnplInpMaxGain | read-write | current | Maximum reception gain |
| 1.3.6.1.4.1.13995.1.1.3.2.1.5 | ColumnplInpThresholds | read-write | current | SNR Thresholds in dB. Returns a string containing 4 integers. |
| 1.3.6.1.4.1.13995.1.1.3.2.1.6 | ColumnplInpAttenuationGain | read-write | current | Attenuation Gain (only HE) |
| 1.3.6.1.4.1.13995.1.1.3.2.1.7 | ColumnplInpSamsDecode | read-only | current | Number of decoded SAMS (only CPE) |
| 1.3.6.1.4.1.13995.1.1.3.2.1.8 | ColumnplInpSamsGood | read-only | current | Number of used SAMS (only CPE) |
| 1.3.6.1.4.1.13995.1.1.3.2.1.9 | ColumnplInpSamsBad | read-only | current | Number of discarded SAMS (only CPE) |
| 1.3.6.1.4.1.13995.1.1.3.4 | TableplInpNodeTable | not-accessible | current | Input Characteristics Remote equipments connected |
| 1.3.6.1.4.1.13995.1.1.3.4.1 | RowplInpNodeEntry | not-accessible | current | Row of table plInpNodeTable |
| 1.3.6.1.4.1.13995.1.1.3.4.1.1 | ColumnplInpNodeReceivedPkts | read-only | current | Number of Packets received from cpeId user |
| 1.3.6.1.4.1.13995.1.1.3.4.1.2 | ColumnplInpNodeReceivedUnrecPkts | read-only | current | Number of Unrecoverable received packets |
| 1.3.6.1.4.1.13995.1.1.3.4.1.3 | ColumnplInpNodeReceivedCorrectedPkts | read-only | current | Number of Corrected (by FEC) received packets |
| 1.3.6.1.4.1.13995.1.1.3.4.1.4 | ColumnplInpNodeReceivedOctets | read-only | current | Number of Received bytes |
| 1.3.6.1.4.1.13995.1.1.3.4.1.5 | ColumnplInpNodeReceivedCorrectedOctets | read-only | current | Number of Corrected (by FEC) received bytes |
| 1.3.6.1.4.1.13995.1.1.3.4.1.6 | ColumnplInpNodeReceivedPower | read-only | current | Total received power |
| 1.3.6.1.4.1.13995.1.1.3.4.1.7 | ColumnplInpNodePLR | read-only | current | Packet Loss Rate |
| 1.3.6.1.4.1.13995.1.1.3.4.1.8 | ColumnplInpNodeMeanBPC | read-only | current | Mean BPC: sum of current bits configuration |
| 1.3.6.1.4.1.13995.1.1.3.4.1.9 | ColumnplInpNodeSNRChanges | read-only | current | Changes of SNR |
| 1.3.6.1.4.1.13995.1.1.3.4.1.10 | ColumnplInpNodeSNR | read-only | current | String with SNR per carrier: contains 512 bytes if it is a HE or 768 if it is a CPE. |
| 1.3.6.1.4.1.13995.1.1.3.4.1.11 | ColumnplInpNodeBPC | read-only | current | String with BPC per carrier configuration: contains 256 bytes if it is a HE or 384 if it is a CPE. |
| 1.3.6.1.4.1.13995.1.1.3.4.1.12 | ColumnplInpNodeCFR | read-only | current | String with CFR per carrier: contains 512 bytes if it is a HE or 768 if it is a CPE. |
| 1.3.6.1.4.1.13995.1.1.3.4.1.13 | ColumnplInpNodeEnableCarriers | read-write | current | String with enabled (1) and disabled (0) carriers: contains 256 bytes if it is a HE or 384 if it is a CPE. |
| 1.3.6.1.4.1.13995.1.1.3.4.1.14 | ColumnplInpNodeProtocolEnableCarriers | read-only | current | String with enabled (1) and disabled (0) carriers: contains 256 bytes if it is a HE or 384 if it is a CPE. |
| 1.3.6.1.4.1.13995.1.1.3.4.1.15 | ColumnplInpNodeEnableProtocolEnableCarriers | read-write | current | Enable protocol (1) and disable protocol (0). |
| 1.3.6.1.4.1.13995.1.1.4 | NodeplTraps | |||
| 1.3.6.1.4.1.13995.1.1.5 | NodeplRemoteCPE | |||
| 1.3.6.1.4.1.13995.1.2 | Nodeinternal | |||
| 1.3.6.1.4.1.13995.2 | NodeamperionSystem | |||
| 1.3.6.1.4.1.13995.2.1 | ScalarserialNumber | read-only | current | The serial number of the board, which is unique per part number |
| 1.3.6.1.4.1.13995.2.2 | ScalarpartNumber | read-only | current | The part number of the board, which identifies the board type |
| 1.3.6.1.4.1.13995.2.3 | ScalarrombootVersion | read-only | current | The string that identifies the Romboot software |
| 1.3.6.1.4.1.13995.2.4 | Tablealarms | not-accessible | current | Dynamic alarm table - shows all the outstanding alarms on the system |
| 1.3.6.1.4.1.13995.2.4.1 | RowalarmsEntry | not-accessible | current | Row of table alarms |
| 1.3.6.1.4.1.13995.2.4.1.1 | ColumnalarmIndex | not-accessible | current | The alarmIndex uniquely identifies alarms on the system |
| 1.3.6.1.4.1.13995.2.4.1.2 | Columndescription | read-only | current | Textual description of the alarm |
| 1.3.6.1.4.1.13995.2.5 | ScalarproductType | read-only | current | injector/extractor/repeator |
| 1.3.6.1.4.1.13995.2.6 | ScalaruserGpsInfoString | read-write | current | User defined string for the user to put the GPS info of this device |
| 1.3.6.1.4.1.13995.2.8 | ScalarlinuxVersion | read-only | current | The string that identifies the Linux kernel software |
| 1.3.6.1.4.1.13995.2.10 | ScalaramperionSysDescr | read-only | current | A textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-syste… |
| 1.3.6.1.4.1.13995.2.11 | ScalaramperionSysObjectID | read-only | current | The vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the SMI enterprises subtr… |
| 1.3.6.1.4.1.13995.2.12 | ScalaramperionSysUpTime | read-only | current | The time (in hundredths of a second) since the network management portion of the system was last re-initialized. |
| 1.3.6.1.4.1.13995.2.13 | ScalaramperionSysContact | read-write | current | The textual identification of the contact person for this managed node, together with information on how to contact this person. |
| 1.3.6.1.4.1.13995.2.14 | ScalaramperionSysName | read-write | current | An administratively-assigned name for this managed node. By convention, this is the node's fully-qualified domain name. |
| 1.3.6.1.4.1.13995.2.15 | ScalaramperionSysLocation | read-write | current | The physical location of this node (e.g., `telephone closet, 3rd floor'). |
| 1.3.6.1.4.1.13995.2.16 | ScalaramperionSysServices | read-only | current | A value which indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, Then, for each laye… |
| 1.3.6.1.4.1.13995.2.18 | ScalaramperionTrapMgr1 | read-write | current | IP address of Manager receceiving traps |
| 1.3.6.1.4.1.13995.2.19 | ScalaramperionTrapMgr2 | read-write | current | IP address of Manager receceiving traps |
| 1.3.6.1.4.1.13995.2.20 | ScalaramperionTrapMgr3 | read-write | current | amperionTrapMgr3 |
| 1.3.6.1.4.1.13995.3 | NodesoftwareUpgrade | |||
| 1.3.6.1.4.1.13995.3.1 | ScalarserverAddress | read-write | current | Name or IP Address of the primary file server from which to retrieve new software. |
| 1.3.6.1.4.1.13995.3.2 | ScalarprimaryPartitionContents | read-only | current | Description of image in primary partition. |
| 1.3.6.1.4.1.13995.3.3 | ScalarcurrentState | read-only | current | Current state of the software upgrade. |
| 1.3.6.1.4.1.13995.3.4 | ScalarbootPartition | read-write | current | Image in this partition will be used when the system boots. |
| 1.3.6.1.4.1.13995.3.5 | ScalarupgradePartition | read-write | current | Default partition to erase and load with a new image. |
| 1.3.6.1.4.1.13995.3.6 | ScalarcurrentPartition | read-only | current | Partition from which currently running software was loaded. |
| 1.3.6.1.4.1.13995.3.7 | ScalarcommandOptions | read-write | current | Software upgrade options: Reserved for future use |
| 1.3.6.1.4.1.13995.3.8 | ScalarbackupPartitionContents | read-only | current | Description of image in backup partition. |
| 1.3.6.1.4.1.13995.3.9 | ScalarprimaryCRC | read-only | current | CRC status of image in primary partition. |
| 1.3.6.1.4.1.13995.3.10 | ScalarbackupCRC | read-only | current | CRC status of image in backup partition. |
| 1.3.6.1.4.1.13995.3.11 | ScalarlastStatus | read-only | current | Status of current or last software upgrade performed (since last reboot). |
| 1.3.6.1.4.1.13995.3.12 | Scalarfilename | read-write | current | Path to filename to retrieve for software upgrade |
| 1.3.6.1.4.1.13995.3.13 | Scalarserver1Address | read-write | current | Name or IP Address of the alternate file server from which to retrieve new software. |
| 1.3.6.1.4.1.13995.3.14 | Scalarserver2Address | read-write | current | Name or IP Address of the second alternate file server from which to retrieve new software. |
| 1.3.6.1.4.1.13995.3.15 | ScalarupgradeSchedule | read-write | current | Scheduled upgrade date and time in MMDDhhmm format. |
| 1.3.6.1.4.1.13995.3.16 | ScalarrebootSchedule | read-write | current | Scheduled reboot date and time in MMDDhhmm format. |
| 1.3.6.1.4.1.13995.3.17 | Scalarlogin | read-write | current | login to use for software upgrade file server access. |
| 1.3.6.1.4.1.13995.3.18 | Scalarpassword | read-write | current | password to use for software upgrade file server access. |
| 1.3.6.1.4.1.13995.3.19 | NotificationswupgradeCompleted | current | swupgradeCompleted | |
| 1.3.6.1.4.1.13995.4 | NodepsGroup | |||
| 1.3.6.1.4.1.13995.4.1 | ScalaracLineVoltage | read-only | current | State of AC Line voltage (on/off) |
| 1.3.6.1.4.1.13995.4.2 | Scalarplus12v | read-only | current | Regulated 12 volt supply |
| 1.3.6.1.4.1.13995.4.3 | Scalarminus8point5v | read-only | current | Regulated -8.5 volt supply |
| 1.3.6.1.4.1.13995.4.4 | Scalarplus5v | read-only | current | Regulated +5 volt supply |
| 1.3.6.1.4.1.13995.4.5 | Scalarplus3point3v | read-only | current | Regulated +3.3 volt supply |
| 1.3.6.1.4.1.13995.4.6 | ScalarbatteryCaseTemp | read-only | current | Battery Case Temperature |
| 1.3.6.1.4.1.13995.4.7 | ScalarinternalMcuTemp | read-only | current | Internal Micro Controller Unit Temperature |
| 1.3.6.1.4.1.13995.4.8 | ScalarbatteryCurrent | read-only | current | Battery Current |
| 1.3.6.1.4.1.13995.4.9 | ScalarbatteryVoltage | read-only | current | Battery Voltage |
| 1.3.6.1.4.1.13995.4.10 | ScalarmcuSoftwareVersion | read-only | current | Micro Controller Unit Software Version |
| 1.3.6.1.4.1.13995.4.11 | ScalarpowerCycleNpu | read-write | current | Power Cycle the Network Processor Unit |
| 1.3.6.1.4.1.13995.4.12 | ScalarpsMode | read-only | current | Power Supply mode, normal mode is protocol; dump mode is a debug mode which displays debug prints from the MCU |
| 1.3.6.1.4.1.13995.4.13 | ScalarshutdownNpu | read-write | current | Shut down 12v, -8.5v, 3.3v and 5v regulators driving the Network Processor Unit. This should only be used if one of the voltages is too high. |
| 1.3.6.1.4.1.13995.4.14 | NotificationpsImageChecksumError | current | The power supply is notifying the main digital board that its main image crc is incorrect. The main digital board needs to reprogram the new power supply image… | |
| 1.3.6.1.4.1.13995.4.15 | NotificationcriticalBatteryShutdownWarning | current | The power supply is warning the main digital board that we have lost AC Line voltage and the battery is running low. The system will be shutting down in second… | |
| 1.3.6.1.4.1.13995.4.16 | Notificationp12vOutOfRange | current | The power supply is warning the main digital board that the +12v regulator is out of range. If the condition is such that it is too high, the decision may be t… | |
| 1.3.6.1.4.1.13995.4.17 | Notificationm8point5vOutOfRange | current | The power supply is warning the main digital board that the -8.5v regulator is out of range. Note that the -8.5v regulator is the same regulator as the +12v. I… | |
| 1.3.6.1.4.1.13995.4.18 | Notificationp5vOutOfRange | current | The power supply is warning the main digital board that the +5v regulator is out of range. If the condition is such that it is too high, the decision may be to… | |
| 1.3.6.1.4.1.13995.4.19 | Notificationp3point3vOutOfRange | current | The power supply is warning the main digital board that the +3.3v regulator is out of range. If the condition is such that it is too high, the decision may be … | |
| 1.3.6.1.4.1.13995.4.20 | NotificationbatteryVoltsOutOfRange | current | The power supply is warning the main digital board that the battery voltage is out of range. | |
| 1.3.6.1.4.1.13995.4.21 | NotificationmcuTempOutOfRange | current | The power supply is warning the main digital board that the microcontroller unit core temperature is out of range. | |
| 1.3.6.1.4.1.13995.4.22 | NotificationbatteryTempOutOfRange | current | The power supply is warning the main digital board that the battery temperature is out of range | |
| 1.3.6.1.4.1.13995.4.23 | NotificationpsDetectedCommLapse | current | Power Supply notifies main digital board that it did not communnicate to the power supply within the agreed upon periodic interval | |
| 1.3.6.1.4.1.13995.4.24 | NotificationcriticalRequestAborted | current | The power supply is notifying the main digital board that one of the critical requests was aborted due to not receiving it twice in a row. | |
| 1.3.6.1.4.1.13995.4.25 | NotificationpowerSupplyInternalError | current | Power Supply / netmgt (PS thread) detected an internal error condition | |
| 1.3.6.1.4.1.13995.4.26 | NotificationpsBatteryNotConnected | current | Power Supply Battery Not Connected. There is no battery backup for the system. | |
| 1.3.6.1.4.1.13995.4.27 | NotificationpsAcOnOff | current | Power Supply detected AC going ON / OFF | |
| 1.3.6.1.4.1.13995.4.28 | ScalarpsHardwareVersion | read-only | current | Hardware Version of the Power SUpply |
| 1.3.6.1.4.1.13995.4.29 | NotificationpsHardwareError | current | The power supply is notifying the main digital board that it incurred a hardware error | |
| 1.3.6.1.4.1.13995.4.30 | ScalarpsEt | read-only | current | Power Supply elapsed time since powerup |
| 1.3.6.1.4.1.13995.4.31 | ScalarnpuEt | read-only | current | Power Supply elapsed time since powerup |
| 1.3.6.1.4.1.13995.4.32 | ScalarnpuPuTimes | read-only | current | Number of times the Network Processing Unit has been powered up. |
| 1.3.6.1.4.1.13995.4.33 | ScalareventDescription | read-only | current | Description of the Last Event - Used in sending traps |
| 1.3.6.1.4.1.13995.4.34 | NotificationnpuDetectedCommLapse | current | Network processing unit could not communnicate to the power supply | |
| 1.3.6.1.4.1.13995.5 | NodeamperionInterfaces | |||
| 1.3.6.1.4.1.13995.5.1 | ScalaramperionifNumber | read-only | current | The number of network interfaces (regardless of their current state) present on this system. |
| 1.3.6.1.4.1.13995.5.2 | TableamperionifTable | not-accessible | current | A list of interface entries. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.4.1.13995.5.2.1 | RowamperionifEntry | not-accessible | current | Row of table amperionifTable |
| 1.3.6.1.4.1.13995.5.2.1.1 | ColumnamperionWirelessActivate | read-write | current | Command to activate 802.11 parameters on demand. |
| 1.3.6.1.4.1.13995.5.2.1.2 | ColumnamperionifDescr | read-only | current | A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the h… |
| 1.3.6.1.4.1.13995.5.2.1.3 | ColumnamperionifType | read-only | current | The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack. |
| 1.3.6.1.4.1.13995.5.2.1.4 | ColumnamperionifMtu | read-only | current | The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagr… |
| 1.3.6.1.4.1.13995.5.2.1.5 | ColumnamperionifSpeed | read-only | current | An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation ca… |
| 1.3.6.1.4.1.13995.5.2.1.6 | ColumnamperionifPhysAddress | read-only | current | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.… |
| 1.3.6.1.4.1.13995.5.2.1.7 | ColumnamperionifAdminStatus | read-write | current | The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.13995.5.2.1.8 | ColumnamperionifOperStatus | read-only | current | The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. |
| 1.3.6.1.4.1.13995.5.2.1.9 | ColumnamperionifLastChange | read-only | current | The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization o… |
| 1.3.6.1.4.1.13995.5.2.1.10 | ColumnamperionifInOctets | read-only | current | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.13995.5.2.1.11 | ColumnamperionifInUcastPkts | read-only | current | The number of subnetwork-unicast packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.13995.5.2.1.12 | ColumnamperionifInNUcastPkts | read-only | current | The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. |
| 1.3.6.1.4.1.13995.5.2.1.13 | ColumnamperionifInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.13995.5.2.1.14 | ColumnamperionifInErrors | read-only | current | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.4.1.13995.5.2.1.15 | ColumnamperionifInUnknownProtos | read-only | current | The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.13995.5.2.1.16 | ColumnamperionifOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.13995.5.2.1.17 | ColumnamperionifOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not se… |
| 1.3.6.1.4.1.13995.5.2.1.18 | ColumnamperionifOutNUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) addre… |
| 1.3.6.1.4.1.13995.5.2.1.19 | ColumnamperionifOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.13995.5.2.1.20 | ColumnamperionifOutErrors | read-only | current | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.4.1.13995.5.2.1.21 | ColumnamperionifOutQLen | read-only | current | The length of the output packet queue (in packets). |
| 1.3.6.1.4.1.13995.5.2.1.22 | ColumnamperionifSpecific | read-only | current | A reference to MIB definitions specific to the particular media being used to realize the interface. For example, if the interface is realized by an ethernet, … |
| 1.3.6.1.4.1.13995.5.2.1.23 | ColumnamperionWirelessConfigEssid | read-write | current | 802.11 network name |
| 1.3.6.1.4.1.13995.5.2.1.24 | ColumnamperionWirelessConfigMode | read-write | current | 802.11 station operational mode |
| 1.3.6.1.4.1.13995.5.2.1.25 | ColumnamperionWirelessConfigChanFreq | read-write | current | 802.11 Channel ID |
| 1.3.6.1.4.1.13995.5.2.1.26 | ColumnamperionWirelessConfigKey | read-write | current | 802.11 encryption or scrambling keys and encryption mode. |
| 1.3.6.1.4.1.13995.5.2.1.27 | ColumnamperionWirelessLinkQuality | read-only | current | A measure of how good the received signal is. |
| 1.3.6.1.4.1.13995.5.2.1.28 | ColumnamperionWirelessSignalLevel | read-only | current | Received signal strength (how strong the received signal is). |
| 1.3.6.1.4.1.13995.5.2.1.29 | ColumnamperionWirelessNoiseLevel | read-only | current | Background noise level (when no packet is transmited). |
| 1.3.6.1.4.1.13995.5.2.1.30 | ColumnamperionWirelessConfigWifType | read-write | current | 802.11 protocol type. |
| 1.3.6.1.4.1.13995.5.2.1.31 | ColumnamperionWirelessConfigBitRate | read-write | current | The bit transmission rate in Megabits per second. (0 = autonegotiated) |
| 1.3.6.1.4.1.13995.5.2.1.32 | ColumnamperionWirelessConfigWDSPeer | read-write | current | The MAC address of any WDS peer. |
| 1.3.6.1.4.1.13995.5.3 | NotificationinterfaceAdminDown | current | Admin of Interface being set down | |
| 1.3.6.1.4.1.13995.5.4 | NotificationinterfaceAdminUp | current | Interface is being set up | |
| 1.3.6.1.4.1.13995.6 | NodeamperionWireless | |||
| 1.3.6.1.4.1.13995.6.1 | ScalaraccessControlStatus | read-write | current | Status of the access control table |
| 1.3.6.1.4.1.13995.6.3 | TableampMacAcceptTable | not-accessible | current | List of Mac address to be accepted |
| 1.3.6.1.4.1.13995.6.3.1 | RowampMacAcceptEntry | not-accessible | current | Row of table ampMacAcceptTable |
| 1.3.6.1.4.1.13995.6.3.1.1 | ColumnmacAcceptTableMacAddress | read-create | current | Mac address to be accepted |
| 1.3.6.1.4.1.13995.6.3.1.2 | ColumnmacAcceptTableRowStatus | read-create | current | Row Status |
| 1.3.6.1.4.1.13995.6.3.1.3 | ColumnmacAcceptTableIndex | not-accessible | current | Unique index |
| 1.3.6.1.4.1.13995.6.3.1.4 | ColumnmacAcceptTableWirelessIf | read-create | current | The wireless interface (e.g. wlan0) that ACL table is applied to. |
| 1.3.6.1.4.1.13995.7 | TableamperionipAddrTable | not-accessible | current | The table of addressing information relevant to this entity's IP addresses. |
| 1.3.6.1.4.1.13995.7.1 | RowamperionipAddrEntry | not-accessible | current | Row of table amperionipAddrTable |
| 1.3.6.1.4.1.13995.7.1.1 | ColumnamperionipAdEntAddr | not-accessible | current | The IP address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.13995.7.1.2 | ColumnamperionipAdEntIfName | read-only | current | The name which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.13995.7.1.3 | ColumnamperionipAdEntNetMask | read-only | current | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.13995.7.1.4 | ColumnamperionipAdEntBcastAddr | read-only | current | The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this… |
| 1.3.6.1.4.1.13995.7.1.5 | ColumnamperionipAdEntReasmMaxSize | read-only | current | The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. |
| 1.3.6.1.4.1.13995.7.1.6 | ColumnamperionipAdRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.13995.7.1.7 | ColumnamperionipAdEntActivate | read-create | current | Command to activate the new IP address/netmask on demand. |
| 1.3.6.1.4.1.13995.8 | NodequalityOfService | |||
| 1.3.6.1.4.1.13995.8.1 | ScalarserviceClassA | read-write | current | Service Class A (Bandwidth in Kbps) |
| 1.3.6.1.4.1.13995.8.2 | ScalarserviceClassB | read-write | current | Service Class B (Bandwidth in Kbps) |
| 1.3.6.1.4.1.13995.8.3 | ScalarserviceClassC | read-write | current | Service Class C (Bandwidth in Kbps) |
| 1.3.6.1.4.1.13995.8.4 | ScalarserviceClassD | read-write | current | Service Class D (Bandwidth in Kbps) |
| 1.3.6.1.4.1.13995.8.5 | TablesubscriberTable | not-accessible | current | List of subscribers |
| 1.3.6.1.4.1.13995.8.5.1 | RowsubscriberEntry | not-accessible | current | Row of table subscriberTable |
| 1.3.6.1.4.1.13995.8.5.1.1 | Columnindex | not-accessible | current | Subscriber unique identification |
| 1.3.6.1.4.1.13995.8.5.1.2 | Columnname | read-create | current | Subscriber Name |
| 1.3.6.1.4.1.13995.8.5.1.3 | ColumnipAddress | read-create | current | Subscriber IP address |
| 1.3.6.1.4.1.13995.8.5.1.4 | ColumnmacAddress | read-create | current | Subscriber MAC address |
| 1.3.6.1.4.1.13995.8.5.1.5 | ColumnserviceClass | read-create | current | Subscriber Server Class |
| 1.3.6.1.4.1.13995.8.5.1.6 | ColumnrowStatus | read-create | current | A special field used to create new rows. |
| 1.3.6.1.4.1.13995.8.6 | ScalarupstreamDownstreamRatio | read-write | current | Upstream bandwidth to downstream bandwidth ratio |
| 1.3.6.1.4.1.13995.8.7 | ScalarqosStatus | read-write | current | Enable or disable status of Qos |
| 1.3.6.1.4.1.13995.9 | Nodeafe | |||
| 1.3.6.1.4.1.13995.9.1 | NodeafeExtractor | |||
| 1.3.6.1.4.1.13995.9.1.1 | ScalarafeExtTxGain | read-write | current | afeExtTxGain |
| 1.3.6.1.4.1.13995.9.1.2 | ScalarafeExtRxGain | read-write | current | afeExtRxGain |
| 1.3.6.1.4.1.13995.9.1.3 | ScalarafeExtDownstream | read-write | current | afeExtDownstream |
| 1.3.6.1.4.1.13995.9.1.4 | ScalarafeExtUpstream | read-write | current | afeExtUpstream |
| 1.3.6.1.4.1.13995.9.1.5 | ScalarafeExtActivate | read-write | current | afeExtActivate |
| 1.3.6.1.4.1.13995.9.2 | NodeafeInjector | |||
| 1.3.6.1.4.1.13995.9.2.1 | ScalarafeInjTxGain | read-write | current | afeInjTxGain |
| 1.3.6.1.4.1.13995.9.2.2 | ScalarafeInjRxGain | read-write | current | afeInjRxGain |
| 1.3.6.1.4.1.13995.9.2.3 | ScalarafeInjDownstream | read-write | current | afeInjDownstream |
| 1.3.6.1.4.1.13995.9.2.4 | ScalarafeInjUpstream | read-write | current | afeInjUpstream |
| 1.3.6.1.4.1.13995.9.2.5 | ScalarafeInjActivate | read-write | current | afeInjActivate |
| 1.3.6.1.4.1.13995.10 | NodeamperionRoutes | |||
| 1.3.6.1.4.1.13995.10.1 | TableamperionRouteTable | not-accessible | current | This entity's IP Routing table. |
| 1.3.6.1.4.1.13995.10.1.1 | RowamperionRouteEntry | not-accessible | current | Row of table amperionRouteTable |
| 1.3.6.1.4.1.13995.10.1.1.1 | ColumnipRouteDest | read-only | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.13995.10.1.1.2 | ColumnipRouteIfIndex | read-write | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.13995.10.1.1.3 | ColumnipRouteMetric1 | read-write | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If … |
| 1.3.6.1.4.1.13995.10.1.1.4 | ColumnipRouteMetric2 | read-write | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.4.1.13995.10.1.1.5 | ColumnipRouteMetric3 | read-write | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.4.1.13995.10.1.1.6 | ColumnipRouteMetric4 | read-write | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.4.1.13995.10.1.1.7 | ColumnipRouteNextHop | read-write | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.13995.10.1.1.8 | ColumnipRouteType | read-only | current | The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this objec… |
| 1.3.6.1.4.1.13995.10.1.1.9 | ColumnipRouteProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.13995.10.1.1.10 | ColumnipRouteAge | read-write | current | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.4.1.13995.10.1.1.11 | ColumnipRouteMask | read-write | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not s… |
| 1.3.6.1.4.1.13995.10.1.1.12 | ColumnipRouteMetric5 | read-write | current | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If… |
| 1.3.6.1.4.1.13995.10.1.1.13 | ColumnipRouteInfo | read-only | current | A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the rou… |
| 1.3.6.1.4.1.13995.10.1.1.14 | ColumnipDefRouteActivate | read-write | current | Command to activate the new default route. |
| 1.3.6.1.4.1.13995.11 | Nodeplc | |||
| 1.3.6.1.4.1.13995.11.1 | NodeplcExtractor | |||
| 1.3.6.1.4.1.13995.11.1.1 | ScalarplcExtTxGain | read-write | current | plcExtTxGain |
| 1.3.6.1.4.1.13995.11.1.2 | ScalarplcExtRxGain | read-write | current | plcExtRxGain |
| 1.3.6.1.4.1.13995.11.2 | NodeplcInjector | |||
| 1.3.6.1.4.1.13995.11.2.1 | ScalarplcInjTxGain | read-write | current | plcInjTxGain |
| 1.3.6.1.4.1.13995.11.2.2 | ScalarplcInjRxGain | read-write | current | plcInjRxGain |
| 1.3.6.1.4.1.13995.11.3 | NotificationplcUp | current | Extractor's PLC interface came up | |
| 1.3.6.1.4.1.13995.11.4 | NotificationplcDown | current | Extractor's PLC interface went down | |
| 1.3.6.1.4.1.13995.11.5 | ScalarafeCpldResetCount | read-only | current | afe Cpld Reset Count |
| 1.3.6.1.4.1.13995.11.6 | ScalarplcLossCount | read-only | current | plc Loss Count |
| 1.3.6.1.4.1.13995.11.7 | ScalarresetCounters | read-write | current | reset Counters |
| 1.3.6.1.4.1.13995.11.8 | TableoptimizationTable | not-accessible | current | If Injector - This table contains the frequencies(channels) / gains / throughput of all the extractors down stream. If Extractor - This table should contain fr… |
| 1.3.6.1.4.1.13995.11.8.1 | RowoptimizationEntry | not-accessible | current | Row of table optimizationTable |
| 1.3.6.1.4.1.13995.11.8.1.1 | ColumnextrIpaddress | read-only | current | extractor's ipaddress |
| 1.3.6.1.4.1.13995.11.8.1.2 | ColumnextrChannelNumber | read-only | current | Extractor Channel Number |
| 1.3.6.1.4.1.13995.11.8.1.3 | ColumnupstreamFreq | read-only | current | Upstream Frequency |
| 1.3.6.1.4.1.13995.11.8.1.4 | ColumndownstreamFreq | read-only | current | Downstream Frequency |
| 1.3.6.1.4.1.13995.11.8.1.5 | ColumnrxGain | read-only | current | rxGain setting |
| 1.3.6.1.4.1.13995.11.8.1.6 | ColumntxGain | read-only | current | Tx Gain Setting |
| 1.3.6.1.4.1.13995.11.8.1.7 | ColumnplcThroughput | read-only | current | plcThroughput |
| 1.3.6.1.4.1.13995.11.8.1.8 | ColumnupStreamDownStream | read-only | current | This to indicate if this entry pertains to the upstream segment or the downstream segment |
| 1.3.6.1.4.1.13995.11.8.1.9 | ColumngpsInfo | read-only | current | GPS co-ordinates. Currently this is a string which means the machine just picks up whatever GPS info is defined in it's system group and sends it to the extrac… |
| 1.3.6.1.4.1.13995.11.9 | ScalarplcEventDescription | read-only | current | String to be sent in the plc up/down event. Will contain ip address of the unit which just went down or will say 'local system' if current system |
| 1.3.6.1.4.1.13995.12 | NodetempGroup | |||
| 1.3.6.1.4.1.13995.12.1 | ScalartempFanState | read-only | current | The fans may be on or off. |
| 1.3.6.1.4.1.13995.12.2 | ScalartempFanTargetTemp | read-write | current | The target temperature is the average temperature we would like the system to operate at if possible. It is used to calculate how long the fans should stay on … |
| 1.3.6.1.4.1.13995.12.3 | ScalartempHighWarnLimit | read-write | current | The system temperature has exceeded a high temperature warning threshold. Temperature is in degrees Celsius. |
| 1.3.6.1.4.1.13995.12.4 | NotificationtempHighWarnLimitTrap | current | The system temperature has exceeded the High Warning threshold. | |
| 1.3.6.1.4.1.13995.12.5 | ScalartempEventDescription | read-only | current | String to be sent with the temperature trap events. |
| 1.3.6.1.4.1.13995.12.6 | NotificationtempHighErrorLimitTrap | current | The system temperature has exceeded the High Error Threshold. | |
| 1.3.6.1.4.1.13995.12.7 | NotificationtempLowWarnLimitTrap | current | The system temperature has gone below the Low Warning Threshold. | |
| 1.3.6.1.4.1.13995.12.8 | NotificationtempLowErrorLimitTrap | current | The system temperature has gone below the Low Error Threshold. | |
| 1.3.6.1.4.1.13995.12.9 | ScalartempHighErrorLimit | read-write | current | The system temperature has exceeded a high temperature error threshold. Temperature is in degrees Celsius. |
| 1.3.6.1.4.1.13995.12.10 | ScalartempLowWarnLimit | read-write | current | The system temperature has gone below a low temperature warning threshold. Temperature is in degrees Celscius. |
| 1.3.6.1.4.1.13995.12.11 | ScalartempLowErrorLimit | read-write | current | The system temperature has gone below the Low Temperature Error Threshold. The temperature is in degrees Celscius. |
| 1.3.6.1.4.1.13995.12.12 | ScalartempHighWarnHist | read-write | current | Hysteresis value for the High Temperature Warning Condition. Once the system temperature has reached or exceeded the High Temperature Warning threshold, it mus… |
| 1.3.6.1.4.1.13995.12.13 | ScalartempHighErrorHist | read-write | current | Hysteresis value for the High Temperature Error Condition. Once the system temperature has reached or exceeded the High Temperature Error Threshold, it must go… |
| 1.3.6.1.4.1.13995.12.14 | ScalartempLowWarnHist | read-write | current | Hysteresis value for the Low Temperature Warning Condition. Once the system temperature is less than or equal to the LowTemperature Warning threshold, it must … |
| 1.3.6.1.4.1.13995.12.15 | ScalartempLowErrorHist | read-write | current | Hysteresis value for the Low Temperature Error Condition. Once the system temperature is less than or equal to the LowTemperature Error threshold, it must go u… |
| 1.3.6.1.4.1.13995.12.16 | ScalartempSystemTemp | read-only | current | The temperature of the Main Digital Board. The temperature is obtained by reading a chip located on the digital board. |