BANYAN-NW-MIB
125 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC1155-SMI | Counter enterprises Gauge IpAddress NetworkAddress OBJECT-TYPE TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.130 | Nodebanyan | |||
| 1.3.6.1.4.1.130.2 | Nodeothers | |||
| 1.3.6.1.4.1.130.2.1 | Nodenetware | |||
| 1.3.6.1.4.1.130.2.1.1 | Nodenwmib1 | |||
| 1.3.6.1.4.1.130.2.1.1.1 | Nodenwfsinfo | |||
| 1.3.6.1.4.1.130.2.1.1.1.1 | ScalarnwName | read-only | mandatory | The name of the NetWare file server. |
| 1.3.6.1.4.1.130.2.1.1.1.2 | ScalarnwCompany | read-only | mandatory | The company name. |
| 1.3.6.1.4.1.130.2.1.1.1.3 | ScalarnwRev | read-only | mandatory | The NetWare software revision for this server. |
| 1.3.6.1.4.1.130.2.1.1.1.4 | ScalarnwRevDate | read-only | mandatory | The release date of the NetWare software revision. |
| 1.3.6.1.4.1.130.2.1.1.1.5 | ScalarnwCopyRight | read-only | mandatory | The copyright for NetWare software. |
| 1.3.6.1.4.1.130.2.1.1.1.6 | ScalarnwConnsSupp | read-only | mandatory | The number of connections supported. |
| 1.3.6.1.4.1.130.2.1.1.1.7 | ScalarnwConnsInUse | read-only | mandatory | The current number of connections in use. |
| 1.3.6.1.4.1.130.2.1.1.1.8 | ScalarnwPeakConnectionsUsed | read-only | mandatory | The highest number of connections used since server came up. |
| 1.3.6.1.4.1.130.2.1.1.1.9 | ScalarnwMaxVolsSupp | read-only | mandatory | Maximum number of volumes supported. |
| 1.3.6.1.4.1.130.2.1.1.1.10 | ScalarnwRevArray | read-only | mandatory | The Revision of the NetWare software displayed in hex. |
| 1.3.6.1.4.1.130.2.1.1.2 | Nodenwperipherals | |||
| 1.3.6.1.4.1.130.2.1.1.2.1 | ScalarnwVolNumber | read-only | mandatory | The number of volumes. |
| 1.3.6.1.4.1.130.2.1.1.2.2 | TablenwVolTable | not-accessible | mandatory | The Table containing entries for each volume. |
| 1.3.6.1.4.1.130.2.1.1.2.2.1 | RownwVolEntry | not-accessible | mandatory | Entry into the volume table. |
| 1.3.6.1.4.1.130.2.1.1.2.2.1.1 | ColumnnwVolIndex | read-only | mandatory | A unique value for each volume on the server, used to order the list. |
| 1.3.6.1.4.1.130.2.1.1.2.2.1.2 | ColumnnwVolName | read-only | mandatory | A string containing the name of the volume. |
| 1.3.6.1.4.1.130.2.1.1.2.2.1.3 | ColumnnwVolDrive | read-only | mandatory | The logical drive number. |
| 1.3.6.1.4.1.130.2.1.1.2.2.1.4 | ColumnnwVolSectorsPerBlk | read-only | mandatory | The number of sectors per block. This is the number of 512-byte sectors contained in each block of the volume. |
| 1.3.6.1.4.1.130.2.1.1.2.2.1.5 | ColumnnwVolStartBlk | read-only | mandatory | The first block available for you to use for data. |
| 1.3.6.1.4.1.130.2.1.1.2.2.1.6 | ColumnnwVolTotalBlks | read-only | mandatory | The total number of blocks for this volume. |
| 1.3.6.1.4.1.130.2.1.1.2.2.1.7 | ColumnnwVolAvailBlks | read-only | mandatory | The number of available blocks for this volume. |
| 1.3.6.1.4.1.130.2.1.1.2.2.1.8 | ColumnnwVolTotalDirSlots | read-only | mandatory | The total number of directory slots for this volume. |
| 1.3.6.1.4.1.130.2.1.1.2.2.1.9 | ColumnnwVolAvailDirSlots | read-only | mandatory | The number of currently available directory slots for this volume. |
| 1.3.6.1.4.1.130.2.1.1.2.2.1.10 | ColumnnwVolMaxDirSlots | read-only | mandatory | The peak number of directory slots for this volume. |
| 1.3.6.1.4.1.130.2.1.1.2.2.1.11 | ColumnnwVolHashing | read-only | mandatory | The flag to indicate whether hashing is in use. |
| 1.3.6.1.4.1.130.2.1.1.2.2.1.12 | ColumnnwVolRemovable | read-only | mandatory | The flag to indicate if the media is removable. |
| 1.3.6.1.4.1.130.2.1.1.2.2.1.13 | ColumnnwVolMounted | read-only | mandatory | The flag to indicate if the volume is mounted. |
| 1.3.6.1.4.1.130.2.1.1.2.2.1.14 | ColumnnwVolPurgeBlks | read-only | mandatory | The number of blocks waiting to be purged. |
| 1.3.6.1.4.1.130.2.1.1.2.2.1.15 | ColumnnwVolNotPurgeBlks | read-only | mandatory | The number of blocks which cannot be purged. |
| 1.3.6.1.4.1.130.2.1.1.3 | Nodenwinterfaces | |||
| 1.3.6.1.4.1.130.2.1.1.3.1 | ScalarnwIfNumber | read-only | mandatory | The number of interfaces for this NetWare file server. |
| 1.3.6.1.4.1.130.2.1.1.3.2 | TablenwIfCfgTable | not-accessible | mandatory | The Table containing entries for interface configuration information. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1 | RownwIfCfgEntry | not-accessible | mandatory | Entry into the interface configuration table. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.1 | ColumnnwIfCfgSignature | read-only | mandatory | The string 'HardwareDriverMLID' followed by 8 spaces is the first entry in the configuration table. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.2 | ColumnnwIfCfgMajVer | read-only | mandatory | The current major version number of the configuration table structure. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.3 | ColumnnwIfCfgMinVer | read-only | mandatory | The current minor version number of the configuration table structure.(0..99 decimal). |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.4 | ColumnnwIfCfgNodeAddress | read-only | mandatory | The node address of the LAN board. An MLID can call ParseDriverParameters to prompt a console operator to configure this address at the command line. Otherwise… |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.5 | ColumnnwIfCfgModeFlags | read-only | mandatory | The mode flags with bit map as follows: bit 0 - set to 1. It indicates if a real driver. bit 1 - set driver uses DMA, bit 2 - reserved for NetWare; must be 0. … |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.6 | ColumnnwIfCfgBoardNo | read-only | mandatory | A unique value for each board in the configuration table used by SNMP to order the list. This corresponds to the logical board number (1- 63) assigned to this … |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.7 | ColumnnwIfCfgBoardInst | read-only | mandatory | The (physical) board instance. The number of the physical card that the logical board is using. If your driver is driving one physical card, all the logical bo… |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.8 | ColumnnwIfCfgMaxDataSz | read-only | mandatory | The largest possible packet size (in bytes) that can be transmitted and/or received by the LAN board. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.9 | ColumnnwIfCfgMaxRcvSz | read-only | mandatory | The maximum size (or best receive size) a packet could be. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.10 | ColumnnwIfCfgRcvSz | read-only | mandatory | The maximum size a protocol stack can send or receive using this board. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.11 | ColumnnwIfCfgCardName | read-only | mandatory | A string containing a name which uniquely identifies the interface card hardware. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.12 | ColumnnwIfCfgShortName | read-only | mandatory | A string describing the LAN board in 8 characters or less. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.13 | ColumnnwIfCfgMediaType | read-only | mandatory | A string describing the MLID's frame type. Examples include `ETHERNET_802.3` and `ETHERNET_II`. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.14 | ColumnnwIfCfgCardId | read-only | mandatory | A reserved field. The Independent Manufacture Support Program (IMSP) assigns a number to each make of LAN board and/or drver if the table version is 1.0. This … |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.15 | ColumnnwIfCfgMediaId | read-only | mandatory | This number identifies the link-level envelope used by the MLID. The ID is associated with a FrameType (nwIfCfgMediaType) string and is assigned with the strin… |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.16 | ColumnnwIfCfgTransportTM | read-only | mandatory | The time (in ticks) it takes the LAN board to transmit a 576 byte packet. This field cannot be 0. Most MLIDs will set this to a value of 1. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.17 | ColumnnwIfCfgMlidMajVer | read-only | mandatory | The current revision level of the MLID. It should match the revision level displayed by the MLID. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.18 | ColumnnwIfCfgMlidMinVer | read-only | mandatory | The current minor version number of the MLID. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.19 | ColumnnwIfCfgFlags | read-only | mandatory | The bus types of physical cards that the MLID supports. Unused bits must be set to 0. EISA 0001h; set if supports EISA type physical card ISA 0002h; set if sup… |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.20 | ColumnnwIfCfgSendRetries | read-only | mandatory | Number of times the MLID should retry send events before aborting the send. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.21 | ColumnnwIfCfgShareFlags | read-only | mandatory | Bits which inform the system which hardware resources a driver/physical card can share with other driver/physical cards. bit 0 set if LAN board is currently sh… |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.22 | ColumnnwIfCfgSlot | read-only | mandatory | If a LAN board is running in Micro Channel or EISA machine, this field holds the slot number where the board is installed. If not used, it should be set to 0. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.23 | ColumnnwIfCfgIoAddr1 | read-only | mandatory | The primary I/O address for the interface card. If not used, it should be set to 0. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.24 | ColumnnwIfCfgIoRange1 | read-only | mandatory | The number of I/O ports used at IOAddr1. If not used, it should be set to 0. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.25 | ColumnnwIfCfgIoAddr2 | read-only | mandatory | The secondary I/O address for the interface card. If not used, it should be set to 0. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.26 | ColumnnwIfCfgIoRange2 | read-only | mandatory | The number of I/O ports used at IOAddr2. If not used, it should be set to 0. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.27 | ColumnnwIfCfgMemAddr1 | read-only | mandatory | The absolute primary memory address used by the LAN board. If not used, this is set to 0. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.28 | ColumnnwIfCfgMemSize1 | read-only | mandatory | The number of paragraphs (16 bytes) the LAN board uses, starting at nwIfCfgMemAddr1. If not used, it is set to 0. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.29 | ColumnnwIfCfgMemAddr2 | read-only | mandatory | The absolute secondary memory address used by the LAN board. If not used, this is set to 0. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.30 | ColumnnwIfCfgMemSize2 | read-only | mandatory | The number of paragraphs (16 bytes) the LAN board uses, starting at nwIfCfgMemAddr2. If not used, it is set to 0. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.31 | ColumnnwIfCfgInt1 | read-only | mandatory | The primary interrupt vector number. FFh = not used. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.32 | ColumnnwIfCfgInt2 | read-only | mandatory | The secondary interrupt vector number. FFh = not used. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.33 | ColumnnwIfCfgDma1 | read-only | mandatory | The primary DMA channel used by the LAN board. FFh = not used. |
| 1.3.6.1.4.1.130.2.1.1.3.2.1.34 | ColumnnwIfCfgDma2 | read-only | mandatory | The secondary DMA channel used by the LAN board. FFh = not used. |
| 1.3.6.1.4.1.130.2.1.1.3.3 | TablenwIfStatsTable | not-accessible | mandatory | The Table containing MLID module statistics. |
| 1.3.6.1.4.1.130.2.1.1.3.3.1 | RownwIfStatsEntry | not-accessible | mandatory | The entry in the table containing MLID module statistics. |
| 1.3.6.1.4.1.130.2.1.1.3.3.1.1 | ColumnnwIfStatsMajVer | read-only | mandatory | The current major version number of the generic portion of the statistics table. The current major version number is 2 for a Netware v3.1x Server. The number i… |
| 1.3.6.1.4.1.130.2.1.1.3.3.1.2 | ColumnnwIfStatsMinVer | read-only | mandatory | The current minor version number of the generic portion of the statistics table. The current minor version number is 0 for a Netware v3.1x Server. The number i… |
| 1.3.6.1.4.1.130.2.1.1.3.3.1.3 | ColumnnwIfStatsValidMask | read-only | mandatory | The bit mask indicating which counters are valid. The first 13 bits (starting with most significant bit) represent fields in this statistics table. The value 0… |
| 1.3.6.1.4.1.130.2.1.1.3.3.1.4 | ColumnnwIfStatsTotalTxPkts | read-only | mandatory | The total number of packets transmitted by this LAN board. |
| 1.3.6.1.4.1.130.2.1.1.3.3.1.5 | ColumnnwIfStatsTotalRxPkts | read-only | mandatory | Total number of incoming packets received by this LAN board. |
| 1.3.6.1.4.1.130.2.1.1.3.3.1.6 | ColumnnwIfStatsNoAvailEcbs | read-only | mandatory | Number of incoming packets that were lost because of unavailable ECBs. |
| 1.3.6.1.4.1.130.2.1.1.3.3.1.7 | ColumnnwIfStatsTxTooBigs | read-only | mandatory | Number of times the send packet was too big for this LAN board to send. |
| 1.3.6.1.4.1.130.2.1.1.3.3.1.8 | ColumnnwIfStatsTxTooSmalls | read-only | mandatory | Number of times the send packet was too small for this LAN board to send. |
| 1.3.6.1.4.1.130.2.1.1.3.3.1.9 | ColumnnwIfStatsRxOverFlows | read-only | mandatory | Number of times the LAN board's receive buffers overflowed. |
| 1.3.6.1.4.1.130.2.1.1.3.3.1.10 | ColumnnwIfStatsRxTooBigs | read-only | mandatory | Number of times the LAN board could not receive a packet because the packet was too big. |
| 1.3.6.1.4.1.130.2.1.1.3.3.1.11 | ColumnnwIfStatsRxTooSmalls | read-only | mandatory | Number of times the LAN board could not receive a packet because the packet was too small. |
| 1.3.6.1.4.1.130.2.1.1.3.3.1.12 | ColumnnwIfStatsTxMiscErrs | read-only | mandatory | The number of transmit errors for the LAN board. This is MLID dependent. |
| 1.3.6.1.4.1.130.2.1.1.3.3.1.13 | ColumnnwIfStatsRxMiscErrs | read-only | mandatory | The number of receive errors for the LAN board. This is MLID dependent. |
| 1.3.6.1.4.1.130.2.1.1.3.3.1.14 | ColumnnwIfStatsTxRetrys | read-only | mandatory | Number of times the LAN board retried a transmit because of a failure. |
| 1.3.6.1.4.1.130.2.1.1.3.3.1.15 | ColumnnwIfStatsRxChkSumErrs | read-only | mandatory | Number of times a checksum error occured for this LAN board. |
| 1.3.6.1.4.1.130.2.1.1.3.3.1.16 | ColumnnwIfStatsRxMismatchs | read-only | mandatory | This is LAN medium-specific. |
| 1.3.6.1.4.1.130.2.1.1.3.3.1.17 | ColumnnwIfStatsBoardNo | read-only | mandatory | A unique value for each board configured, used by SNMP to order the list of interface statistics. This corresponds to the the logical board number (1 - 63) ass… |
| 1.3.6.1.4.1.130.2.1.1.3.3.1.18 | ColumnnwIfStatsCustom | read-only | mandatory | The total number of custom variables which follow this word. |
| 1.3.6.1.4.1.130.2.1.1.3.4 | TablenwIfCustomStatsTable | not-accessible | mandatory | The Table containing custom variables. These are custom counters. |
| 1.3.6.1.4.1.130.2.1.1.3.4.1 | RownwIfCustomStatsEntry | not-accessible | mandatory | The entry in the table containing custom variables indexed by the board number and index of the custom variables. |
| 1.3.6.1.4.1.130.2.1.1.3.4.1.1 | ColumnnwIfCustomStatsBoardNo | read-only | mandatory | A unique value for each board configured, used by SNMP to order the list of custom statistics. This corresponds to the the logical board number (1 - 63) assign… |
| 1.3.6.1.4.1.130.2.1.1.3.4.1.2 | ColumnnwIfCustomStatsIndex | read-only | mandatory | A unique value for each custom variable in the table. (There are a total of nwIfCustom variables). |
| 1.3.6.1.4.1.130.2.1.1.3.4.1.3 | ColumnnwIfCustomStatsDescr | read-only | mandatory | A descriptive text string for the custom variable/counter. |
| 1.3.6.1.4.1.130.2.1.1.3.4.1.4 | ColumnnwIfCustomStatsValue | read-only | mandatory | The value associated with the custom variable/counter. |
| 1.3.6.1.4.1.130.2.1.1.4 | Nodenwprotocols | |||
| 1.3.6.1.4.1.130.2.1.1.4.1 | ScalarnwProtNumber | read-only | mandatory | The number of protocols supported by this server. |
| 1.3.6.1.4.1.130.2.1.1.4.2 | TablenwProtCfgTable | not-accessible | mandatory | The Table containing protocol configuration information. |
| 1.3.6.1.4.1.130.2.1.1.4.2.1 | RownwProtCfgEntry | not-accessible | mandatory | The entry in the protocol configuration table. |
| 1.3.6.1.4.1.130.2.1.1.4.2.1.1 | ColumnnwProtCfgProtNo | read-only | mandatory | A unique value for each protocol configured, used by SNMP to order the list. |
| 1.3.6.1.4.1.130.2.1.1.4.2.1.2 | ColumnnwProtCfgMajVer | read-only | mandatory | The major version number of the configuration table. |
| 1.3.6.1.4.1.130.2.1.1.4.2.1.3 | ColumnnwProtCfgMinVer | read-only | mandatory | The minor version number of the configuration table. |
| 1.3.6.1.4.1.130.2.1.1.4.2.1.4 | ColumnnwProtCfgName | read-only | mandatory | A string used to register the protocol stack with the Link Support Lanyer (LSL). This string cannot have more than 15 characters (not including the length byte… |
| 1.3.6.1.4.1.130.2.1.1.4.2.1.5 | ColumnnwProtCfgRegName | read-only | mandatory | A string containing the name of the protocol stack. It is a length-preceded, zero-terminated string. |
| 1.3.6.1.4.1.130.2.1.1.4.2.1.6 | ColumnnwProtCfgStkMajVer | read-only | mandatory | The major version number of the protocol stack. The number in this field is a decimal number. |
| 1.3.6.1.4.1.130.2.1.1.4.2.1.7 | ColumnnwProtCfgStkMinVer | read-only | mandatory | The minor version number of the protocol stack. The number in this field is a decimal number. |
| 1.3.6.1.4.1.130.2.1.1.4.3 | TablenwProtStatsTable | not-accessible | mandatory | The table containing protocol statistics information. |
| 1.3.6.1.4.1.130.2.1.1.4.3.1 | RownwProtStatsEntry | not-accessible | mandatory | The entry in the protocol statistics table indexed by the protocol statistics number. |
| 1.3.6.1.4.1.130.2.1.1.4.3.1.1 | ColumnnwProtStatsProtNo | read-only | mandatory | A unique value for each protocol supported on the server, used by SNMP to order the list. |
| 1.3.6.1.4.1.130.2.1.1.4.3.1.2 | ColumnnwProtStatsMajVer | read-only | mandatory | The major version number of the protocol stack statistics table. |
| 1.3.6.1.4.1.130.2.1.1.4.3.1.3 | ColumnnwProtStatsMinVer | read-only | mandatory | The minor version number of the protocol stack statistics table. |
| 1.3.6.1.4.1.130.2.1.1.4.3.1.4 | ColumnnwProtStatsValidMask | read-only | mandatory | A bit mask indicating which counters are used. The value 0 indicates Yes; the value 1 indicates No. The bit/counter correlations are determine by shifting left… |
| 1.3.6.1.4.1.130.2.1.1.4.3.1.5 | ColumnnwProtStatsTotalTxPkts | read-only | mandatory | The total number of packets that were requested to be transmitted (whether they were actually transmitted or not). |
| 1.3.6.1.4.1.130.2.1.1.4.3.1.6 | ColumnnwProtStatsTotalRxPkts | read-only | mandatory | The total number of incoming packets that were received. |
| 1.3.6.1.4.1.130.2.1.1.4.3.1.7 | ColumnnwProtStatsIgnoredRxPkts | read-only | mandatory | The total number of incoming packets that were ignored by the stack. |
| 1.3.6.1.4.1.130.2.1.1.4.3.1.8 | ColumnnwProtStatsCustom | read-only | mandatory | The total number of custom counters following this field. |
| 1.3.6.1.4.1.130.2.1.1.4.4 | TablenwProtCustomStatsTable | not-accessible | mandatory | The table of custom statistics for the protocol. |
| 1.3.6.1.4.1.130.2.1.1.4.4.1 | RownwProtCustomStatsEntry | not-accessible | mandatory | The entry in table of custom statistics indexed by the protocol number and the index. |
| 1.3.6.1.4.1.130.2.1.1.4.4.1.1 | ColumnnwProtCustomStatsProtNo | read-only | mandatory | A unique value for each protocol supported, used by SNMP to order the list. |
| 1.3.6.1.4.1.130.2.1.1.4.4.1.2 | ColumnnwProtCustomStatsIndex | read-only | mandatory | A unique value for each statistic in the custom statistics table. |
| 1.3.6.1.4.1.130.2.1.1.4.4.1.3 | ColumnnwProtCustomStatsDescr | read-only | mandatory | A string describing for the custom statistic. |
| 1.3.6.1.4.1.130.2.1.1.4.4.1.4 | ColumnnwProtCustomStatsValue | read-only | mandatory | The value of the custom statistic. |