BAS-SONET-MIB
35 objects
This MIB module defines the configuration and status MIB objects for a Broadband Access System SONET interface.
Imported Objects
| BAS-MIB | basSonet |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3493.2.20.1 | IdentitybasSonetMib | This MIB module defines the configuration and status MIB objects for a Broadband Access System SONET interface. | ||
| 1.3.6.1.4.1.3493.2.20.1.1 | NodebasSonetObjects | |||
| 1.3.6.1.4.1.3493.2.20.1.1.1 | TablebasSonetPathTable | not-accessible | current | A table containing SONET Path specific variables for this POS implementation. |
| 1.3.6.1.4.1.3493.2.20.1.1.1.1 | RowbasSonetPathEntry | not-accessible | current | Management information about a particular POS Link. |
| 1.3.6.1.4.1.3493.2.20.1.1.1.1.1 | ColumnbasSonetPathB3Err | read-only | current | The number of packets received on this link with B3 bit errors. Bit Interleaved Parity 8 is calculated over all bits in the SPE of each frame. |
| 1.3.6.1.4.1.3493.2.20.1.1.1.1.2 | ColumnbasSonetPathG1Err | read-only | current | The number of B3 errors that were detected by the remote terminal in its received signal. |
| 1.3.6.1.4.1.3493.2.20.1.1.1.1.3 | ColumnbasSonetPathPais | read-only | current | The number of times a Path Alarm Indication Signal has been detected. A PAIS occurs if all the H1/H2 pointer bytes in the received SONET frame are 01. |
| 1.3.6.1.4.1.3493.2.20.1.1.1.1.4 | ColumnbasSonetPathPrdi | read-only | current | The number of times a Path Remote Defect Indication has been detected. A PRDI occurs if bits 5,6 and 7 of the G1 byte received with the same value for 5 onsecu… |
| 1.3.6.1.4.1.3493.2.20.1.1.1.1.5 | ColumnbasSonetPathPlop | read-only | current | The number of times a Path Loss of Pointer has been detected. A PLOP occurs if all the H1/H2 pointer bytes in the received SONET frame are not all 01 indicatin… |
| 1.3.6.1.4.1.3493.2.20.1.1.1.1.6 | ColumnbasSonetPathB3Threshold | read-write | current | The number of packets received with B3 errors hits this threshold issue an alarm. |
| 1.3.6.1.4.1.3493.2.20.1.1.1.1.7 | ColumnbasSonetPathRxJ1 | read-only | current | The first J1 byte received in last packet. |
| 1.3.6.1.4.1.3493.2.20.1.1.1.1.8 | ColumnbasSonetPathRxC2 | read-only | current | C2 byte received in last packet. |
| 1.3.6.1.4.1.3493.2.20.1.1.1.1.9 | ColumnbasSonetPathRxG1 | read-only | current | G1 byte received in last packet. |
| 1.3.6.1.4.1.3493.2.20.1.1.2 | TablebasSonetLineTable | not-accessible | current | A table containing SONET Line specific variables for this POS implementation. |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1 | RowbasSonetLineEntry | not-accessible | current | Management information about a particular POS Link. |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.1 | ColumnbasSonetLineTxErr | read-only | current | The sum of all transmit errors that caused the packet to not be transmitted. These errors consist of tx fifo error, link layer errors, minimum packet size viol… |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.2 | ColumnbasSonetLineB1Err | read-only | current | The number of packets received on this link with B1 bit errors. Bit Interleaved Parity 8 is calculated over all bytes of each frame. |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.3 | ColumnbasSonetLineB2Err | read-only | current | The number of packets received on this link with B2 bit errors. Bit Interleaved Parity 8 is calculated over all bytes of each frame except for the first three … |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.4 | ColumnbasSonetLineM1Err | read-only | current | The number of B2 errors that were detected by the remote terminal in its received signal. |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.5 | ColumnbasSonetLineRxFifoOverflow | read-only | current | The number of packets received on this link with an error detected in the receive fifo. |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.6 | ColumnbasSonetLineRxAbort | read-only | current | The number of packets received on this link in which the abort sequence is detected. |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.7 | ColumnbasSonetLineRxRunts | read-only | current | The number of packets received on this link which are smaller than the minimum packet size. |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.8 | ColumnbasSonetLineLoc | read-only | current | The number of times a loss of clock has been detected. LOC occurs if no transitions are detected on the receive SONET clock for 16 periods of the transmit cloc… |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.9 | ColumnbasSonetLineLof | read-only | current | The number of times a loss of frame has been detected. LOF occurs if RX_OOF (out-of-frame) is active continuously for 24 consecutive frames (3 ms). |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.10 | ColumnbasSonetLineLos | read-only | current | The number of times a loss of signal has been detected. A LOS indicates to the framer that there is no signal present from the optical receiver. |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.11 | ColumnbasSonetLineLais | read-only | current | The number of times a Line Alarm Indication Signal has been detected. A LAIS occurs if the 3 LSBs of K2 are received as '111' for 5 consecutive frames |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.12 | ColumnbasSonetLineLrdi | read-only | current | The number of times a Line Remote Defect Indication has been detected. A LRDI occurs if the 3 LSBs of K2 are not received as '110' for 5 consecutive frames. |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.13 | ColumnbasSonetLineB1Threshold | read-write | current | The number of packets received with B1 errors hits this threshold issue an alarm. |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.14 | ColumnbasSonetLineB2Threshold | read-write | current | The number of packets received with B2 errors hits this threshold issue an alarm. |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.15 | ColumnbasSonetLineSFThreshold | read-write | current | The number of packets received with B2 errors hits this threshold issue a signal fail alarm. |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.16 | ColumnbasSonetLineSDThreshold | read-write | current | The number of packets received with B2 errors hits this threshold issue a signal degrade alarm. |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.17 | ColumnbasSonetLineLastCleared | read-only | current | The value of sysUpTime when these Counter32s were last cleared. |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.18 | ColumnbasSonetLineRxK1 | read-only | current | K1 byte received in last packet. |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.19 | ColumnbasSonetLineRxK2 | read-only | current | K2 byte received in last packet. |
| 1.3.6.1.4.1.3493.2.20.1.1.2.1.20 | ColumnbasSonetLineRxGiants | read-only | current | The number of packets received on this link which are larger than the maximum packet size. |