BASEBRDD-MIB-MIB
636 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.412 | Nodedmtf | |||
| 1.3.6.1.4.1.412.2 | NodedmtfStdMifs | |||
| 1.3.6.1.4.1.412.2.1 | NodedmtfServiceLayerMIF | |||
| 1.3.6.1.4.1.412.2.1.1 | TabledMTFComponentIDTable | not-accessible | mandatory | This group defines the attributes common to all components. This group is required. |
| 1.3.6.1.4.1.412.2.1.1.1 | RowdMTFComponentIDEntry | not-accessible | mandatory | This group defines the attributes common to all components. This group is required. |
| 1.3.6.1.4.1.412.2.1.1.1.1 | ColumnmanufacturerAtt1 | read-only | mandatory | Manufacturer of this system. |
| 1.3.6.1.4.1.412.2.1.1.1.2 | ColumnproductAtt2 | read-only | mandatory | Product name for this system. |
| 1.3.6.1.4.1.412.2.1.1.1.3 | ColumnversionAtt3 | read-only | mandatory | Version number of this system. |
| 1.3.6.1.4.1.412.2.1.1.1.4 | ColumnserialNumberAtt4 | read-only | mandatory | Serial number for this system. |
| 1.3.6.1.4.1.412.2.1.1.1.5 | ColumninstallationAtt5 | read-only | mandatory | The time and date when this component was installed. |
| 1.3.6.1.4.1.412.2.1.1.1.6 | ColumnverifyAtt6 | read-only | mandatory | A code that provides a level of verification that the component is still installed and working. |
| 1.3.6.1.4.1.412.2.4 | NodedmtfSystemsMIF | |||
| 1.3.6.1.4.1.412.2.4.1 | TabledMTFGeneralInformationTable | not-accessible | mandatory | This group defines general information about this system. |
| 1.3.6.1.4.1.412.2.4.1.1 | RowdMTFGeneralInformationEntry | not-accessible | mandatory | This group defines general information about this system. |
| 1.3.6.1.4.1.412.2.4.1.1.1 | ColumnsystemNameAtt1 | read-write | mandatory | A name to identify this system. |
| 1.3.6.1.4.1.412.2.4.1.1.2 | ColumnsystemLocationAtt2 | read-write | mandatory | The physical location of this system. |
| 1.3.6.1.4.1.412.2.4.1.1.3 | ColumnsystemPrimaryUserNameAtt3 | read-write | mandatory | The name of the primary user or owner of this system. |
| 1.3.6.1.4.1.412.2.4.1.1.4 | ColumnsystemPrimaryUserPhoneAtt4 | read-write | mandatory | The phone number of the primary user of this system. |
| 1.3.6.1.4.1.412.2.4.1.1.5 | ColumnsystemBootupTimeAtt5 | read-only | mandatory | The time at which the system was last booted. |
| 1.3.6.1.4.1.412.2.4.1.1.6 | ColumnsystemDateTimeAtt6 | read-write | mandatory | The actual system date and time. |
| 1.3.6.1.4.1.412.2.4.2 | TabledMTFOperatingSystemTable | not-accessible | mandatory | This group defines general information about operating systems installed on this system. |
| 1.3.6.1.4.1.412.2.4.2.1 | RowdMTFOperatingSystemEntry | not-accessible | mandatory | This group defines general information about operating systems installed on this system. |
| 1.3.6.1.4.1.412.2.4.2.1.0 | ColumndMTFOperatingSystemState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.2.1.1 | ColumnoperatingSystemIndexAtt1 | read-only | mandatory | The index into the operating system table. |
| 1.3.6.1.4.1.412.2.4.2.1.2 | ColumnoperatingSystemNameAtt2 | read-only | mandatory | The name of this operating system. |
| 1.3.6.1.4.1.412.2.4.2.1.3 | ColumnoperatingSystemVersionAtt3 | read-only | mandatory | The version number of this operating system. |
| 1.3.6.1.4.1.412.2.4.2.1.4 | ColumnprimaryOperatingSystemAtt4 | read-only | mandatory | If true, this is the primary operating system. |
| 1.3.6.1.4.1.412.2.4.2.1.5 | ColumnoperatingSystemBootDeviceStorageTypeAtt5 | read-only | mandatory | An index into the Disks Table to indicate the device from which this operating system was booted. To fully access the Disks Table, this index must be combined … |
| 1.3.6.1.4.1.412.2.4.2.1.6 | ColumnoperatingSystemBootDeviceIndexAtt6 | read-only | mandatory | An index into the Disks Table. |
| 1.3.6.1.4.1.412.2.4.2.1.7 | ColumnoperatingSystemBootPartitionIndexAtt7 | read-only | mandatory | An index into the Partition table indicating the partition from which this operating system booted. |
| 1.3.6.1.4.1.412.2.4.2.1.8 | ColumnoperatingSystemDescriptionAtt8 | read-only | mandatory | A description of this operating system. |
| 1.3.6.1.4.1.412.2.4.3 | TabledMTFSystemBIOSTable | not-accessible | mandatory | This group defines the attributes for the System BIOS. |
| 1.3.6.1.4.1.412.2.4.3.1 | RowdMTFSystemBIOSEntry | not-accessible | mandatory | This group defines the attributes for the System BIOS. |
| 1.3.6.1.4.1.412.2.4.3.1.0 | ColumndMTFSystemBIOSState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.3.1.1 | ColumnbIOSIndexAtt1 | read-only | mandatory | The index into the system BIOS table. |
| 1.3.6.1.4.1.412.2.4.3.1.2 | ColumnbIOSManufacturerAtt2 | read-only | mandatory | The name of the company that wrote this System BIOS. |
| 1.3.6.1.4.1.412.2.4.3.1.3 | ColumnbIOSVersionAtt3 | read-only | mandatory | The version number or version string of this BIOS. |
| 1.3.6.1.4.1.412.2.4.3.1.4 | ColumnbIOSROMSizeAtt4 | read-only | mandatory | The physical size of this BIOS ROM device in kilobytes. |
| 1.3.6.1.4.1.412.2.4.3.1.5 | ColumnbIOSStartingAddressAtt5 | read-only | mandatory | The starting physical address for the memory which the BIOS occupies. |
| 1.3.6.1.4.1.412.2.4.3.1.6 | ColumnbIOSEndingAddressAtt6 | read-only | mandatory | The ending physical address for the memory which the BIOS occupies. |
| 1.3.6.1.4.1.412.2.4.3.1.7 | ColumnbIOSLoaderVersionAtt7 | read-only | mandatory | The BIOS flash loader version number or string. |
| 1.3.6.1.4.1.412.2.4.3.1.8 | ColumnbIOSReleaseDateAtt8 | read-only | mandatory | The BIOS release date. |
| 1.3.6.1.4.1.412.2.4.3.1.9 | ColumnprimaryBIOSAtt9 | read-only | mandatory | If true, this is the primary System BIOS. |
| 1.3.6.1.4.1.412.2.4.5 | TabledMTFProcessorTable | not-accessible | mandatory | This group defines the attributes for each and every processor installed in this system. |
| 1.3.6.1.4.1.412.2.4.5.1 | RowdMTFProcessorEntry | not-accessible | mandatory | This group defines the attributes for each and every processor installed in this system. |
| 1.3.6.1.4.1.412.2.4.5.1.0 | ColumndMTFProcessorState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.5.1.1 | ColumnprocessorIndexAtt1 | read-only | mandatory | An index into the processor table. |
| 1.3.6.1.4.1.412.2.4.5.1.2 | ColumnprocessorTypeAtt2 | read-only | mandatory | The type of processor currently in the system. |
| 1.3.6.1.4.1.412.2.4.5.1.3 | ColumnprocessorFamilyAtt3 | read-only | mandatory | The family of processors to which this processor belongs. |
| 1.3.6.1.4.1.412.2.4.5.1.4 | ColumnprocessorVersionInformationAtt4 | read-only | mandatory | The version number or string for this processor. |
| 1.3.6.1.4.1.412.2.4.5.1.5 | ColumnmaximumSpeedAtt5 | read-only | mandatory | The maximum processor speed supported by this system in MHz. |
| 1.3.6.1.4.1.412.2.4.5.1.6 | ColumncurrentSpeedAtt6 | read-only | mandatory | The current speed (in MHz) of this processor. |
| 1.3.6.1.4.1.412.2.4.5.1.7 | ColumnprocessorUpgradeAtt7 | read-only | mandatory | The method by which this processor can be upgraded, if upgrades are supported. |
| 1.3.6.1.4.1.412.2.4.5.1.8 | ColumnfRUGroupIndexAtt8 | read-only | mandatory | If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a … |
| 1.3.6.1.4.1.412.2.4.5.1.9 | ColumnoperationalGroupIndexAtt9 | read-only | mandatory | The index into the Operational State Table for this device if applicable. |
| 1.3.6.1.4.1.412.2.4.5.1.10 | Columnlevel1CacheIndexAtt10 | read-only | mandatory | An index into the System Cache table that identifies the entry that describes the L1 cache for this processor. If more than one processor points to the same ca… |
| 1.3.6.1.4.1.412.2.4.5.1.11 | Columnlevel2CacheIndexAtt11 | read-only | mandatory | An index into the System Cache table that identifies the entry that describes the L2 cache for this processor If more than one processor points to the same cac… |
| 1.3.6.1.4.1.412.2.4.5.1.12 | Columnlevel3CacheIndexAtt12 | read-only | mandatory | An index into the System Cache table that identifies the entry that describes the L3 cache for this processor. If more than one processor points to the same ca… |
| 1.3.6.1.4.1.412.2.4.9 | TabledMTFSystemCacheTable | not-accessible | mandatory | This group defines the attributes for different System Caches installed in this system. |
| 1.3.6.1.4.1.412.2.4.9.1 | RowdMTFSystemCacheEntry | not-accessible | mandatory | This group defines the attributes for different System Caches installed in this system. |
| 1.3.6.1.4.1.412.2.4.9.1.0 | ColumndMTFSystemCacheState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.9.1.1 | ColumnsystemCacheIndexAtt1 | read-only | mandatory | An index into the System Cache table. |
| 1.3.6.1.4.1.412.2.4.9.1.2 | ColumnsystemCacheLevelAtt2 | read-only | mandatory | Is this the primary System Cache, or a subsidiary cache? |
| 1.3.6.1.4.1.412.2.4.9.1.3 | ColumnsystemCacheSpeedAtt3 | read-only | mandatory | The speed of this System Cache module in nanoseconds. |
| 1.3.6.1.4.1.412.2.4.9.1.4 | ColumnsystemCacheSizeAtt4 | read-only | mandatory | The size of this System Cache module in kilobytes. |
| 1.3.6.1.4.1.412.2.4.9.1.5 | ColumnsystemCacheWritePolicyAtt5 | read-only | mandatory | Is this a write-back or a write-through cache? |
| 1.3.6.1.4.1.412.2.4.9.1.6 | ColumnsystemCacheErrorCorrectionAtt6 | read-only | mandatory | The error correction scheme supported by this cache component. |
| 1.3.6.1.4.1.412.2.4.9.1.7 | ColumnfRUGroupIndexAtt7-1 | read-only | mandatory | If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a … |
| 1.3.6.1.4.1.412.2.4.9.1.8 | ColumnoperationalGroupIndexAtt8-2 | read-only | mandatory | The index into the Operational State Table for this device. |
| 1.3.6.1.4.1.412.2.4.9.1.9 | ColumnsystemCacheTypeAtt9 | read-only | mandatory | This defines the system cache type. |
| 1.3.6.1.4.1.412.2.4.9.1.10 | ColumnlineSizeAtt10 | read-only | mandatory | The size, in bytes, of a single cache bucket or line. |
| 1.3.6.1.4.1.412.2.4.9.1.11 | ColumnvolatilityAtt11 | read-only | mandatory | This defines the volatility of the cache. |
| 1.3.6.1.4.1.412.2.4.9.1.12 | ColumnreplacementPolicyAtt12 | read-only | mandatory | The algorithm used by the cache to determine which cache lines or buckets should be re-used. |
| 1.3.6.1.4.1.412.2.4.9.1.13 | ColumnreadPolicyAtt13 | read-only | mandatory | The policy that shall be employed by the cache for handling read requests. |
| 1.3.6.1.4.1.412.2.4.9.1.14 | ColumnflushTimerAtt14 | read-only | mandatory | The maximum amount of time, in seconds, dirty lines or buckets may remain in the cache before they are flushed. A value of zero indicated that a cache flush is… |
| 1.3.6.1.4.1.412.2.4.9.1.15 | ColumnassociativityAtt15 | read-only | mandatory | This defines the system cache associativity (direct-mapped, 2-way, 4-way, etc). |
| 1.3.6.1.4.1.412.2.4.10 | TabledMTFParallelPortsTable | not-accessible | mandatory | This group defines the attributes for parallel ports in this system. |
| 1.3.6.1.4.1.412.2.4.10.1 | RowdMTFParallelPortsEntry | not-accessible | mandatory | This group defines the attributes for parallel ports in this system. |
| 1.3.6.1.4.1.412.2.4.10.1.0 | ColumndMTFParallelPortsState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.10.1.1 | ColumnparallelPortIndexAtt1 | read-only | mandatory | An index into the parallel ports table. |
| 1.3.6.1.4.1.412.2.4.10.1.2 | ColumnparallelBaseIOAddressAtt2 | read-only | mandatory | Base I/O address for this parallel port. |
| 1.3.6.1.4.1.412.2.4.10.1.3 | ColumniRQUsedAtt3-1 | read-only | mandatory | IRQ number that is being used by this parallel port. |
| 1.3.6.1.4.1.412.2.4.10.1.4 | ColumnlogicalNameAtt4-1 | read-only | mandatory | The logical name of the I/O device on this parallel port, under this operating environment. |
| 1.3.6.1.4.1.412.2.4.10.1.5 | ColumnconnectorTypeAtt5-1 | read-only | mandatory | The connector used to interface with the I/O device on this parallel port. |
| 1.3.6.1.4.1.412.2.4.10.1.6 | ColumnconnectorPinoutAtt6 | read-only | mandatory | The pinout used by the I/O device on this parallel port. |
| 1.3.6.1.4.1.412.2.4.10.1.7 | ColumndMASupportAtt7 | read-only | mandatory | If true, DMA is supported. |
| 1.3.6.1.4.1.412.2.4.10.1.8 | ColumnparallelPortCapabilitiesAtt8 | read-only | mandatory | Capabilities of this parallel port. This is a bit field mask with the bits defined as follows: Bit 0 (2^0) set = XT/AT compatible, Bit 1 (2^1) set = PS/2 compa… |
| 1.3.6.1.4.1.412.2.4.10.1.9 | ColumnoperationalGroupIndexAtt9-1 | read-only | mandatory | The index into the Operational State Table for this device. |
| 1.3.6.1.4.1.412.2.4.10.1.10 | ColumnparallelPortSecuritySettingsAtt10 | read-only | mandatory | Attribute describing the current hardware security settings on this device |
| 1.3.6.1.4.1.412.2.4.11 | TabledMTFSerialPortsTable | not-accessible | mandatory | This group defines the attributes for serial ports in this system. |
| 1.3.6.1.4.1.412.2.4.11.1 | RowdMTFSerialPortsEntry | not-accessible | mandatory | This group defines the attributes for serial ports in this system. |
| 1.3.6.1.4.1.412.2.4.11.1.0 | ColumndMTFSerialPortsState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.11.1.1 | ColumnserialPortIndexAtt1 | read-only | mandatory | An index into the serial ports table. |
| 1.3.6.1.4.1.412.2.4.11.1.2 | ColumnserialBaseIOAddressAtt2 | read-only | mandatory | Base I/O address for this serial port. |
| 1.3.6.1.4.1.412.2.4.11.1.3 | ColumniRQUsedAtt3 | read-only | mandatory | IRQ number that is being used by this serial port. |
| 1.3.6.1.4.1.412.2.4.11.1.4 | ColumnlogicalNameAtt4 | read-only | mandatory | The logical name of this serial port under this operating environment. |
| 1.3.6.1.4.1.412.2.4.11.1.5 | ColumnconnectorTypeAtt5 | read-only | mandatory | The connector used to interface with the I/O device on this serial port. |
| 1.3.6.1.4.1.412.2.4.11.1.6 | ColumnmaximumSpeedAtt6 | read-only | mandatory | Maximum transfer speed of the device on this serial port in bits per second. |
| 1.3.6.1.4.1.412.2.4.11.1.7 | ColumnserialPortCapabilitiesAtt7 | read-only | mandatory | The capabilities of this Serial port. |
| 1.3.6.1.4.1.412.2.4.11.1.8 | ColumnoperationalGroupIndexAtt8-1 | read-only | mandatory | The index into the Operational State Table for this device. |
| 1.3.6.1.4.1.412.2.4.11.1.9 | ColumnserialPortSecuritySettingsAtt9 | read-only | mandatory | Attribute describing the current hardware security settings on this device |
| 1.3.6.1.4.1.412.2.4.16 | TabledMTFPowerSupplyTable | not-accessible | mandatory | This group defines various attributes for power supplies in this system. |
| 1.3.6.1.4.1.412.2.4.16.1 | RowdMTFPowerSupplyEntry | not-accessible | mandatory | This group defines various attributes for power supplies in this system. |
| 1.3.6.1.4.1.412.2.4.16.1 | NodedMTFPowerSupplyEvt1 | powerSupplyStatusChange | ||
| 1.3.6.1.4.1.412.2.4.16.1.0 | ColumndMTFPowerSupplyState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.16.1.1 | ColumnpowerSupplyIndexAtt1 | read-only | mandatory | The index number of the current power supply. |
| 1.3.6.1.4.1.412.2.4.16.1.2 | ColumnfRUGroupIndexAtt2-1 | read-only | mandatory | If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a … |
| 1.3.6.1.4.1.412.2.4.16.1.3 | ColumnoperationalGroupIndexAtt3-1 | read-only | mandatory | The index into the Operational State table for this device. |
| 1.3.6.1.4.1.412.2.4.16.1.4 | ColumnpowerUnitIndexAtt4 | read-only | mandatory | This is the ID of the Power Unit (logical power supply) to which this Power Supply belongs. This value matches up with the Power Unit Table Index attribute def… |
| 1.3.6.1.4.1.412.2.4.16.1.5 | ColumnpowerSupplyTypeAtt5 | read-only | mandatory | This attribute describes the type of Power Supply, e.g. Linear, Switching, Battery, etc. |
| 1.3.6.1.4.1.412.2.4.16.1.6 | ColumninputVoltageCapabilityDescriptionAtt6 | read-only | mandatory | An expanded description of the Input Voltage Capability for this Power Supply. |
| 1.3.6.1.4.1.412.2.4.16.1.7 | Columnrange1InputVoltageLowAtt7 | read-only | mandatory | The low voltage of Input Voltage Range 1 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.16.1.8 | Columnrange1InputVoltageHighAtt8 | read-only | mandatory | The high voltage of Input Voltage Range 1 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.16.1.9 | Columnrange1VoltageProbeIndexAtt9 | read-only | mandatory | Index into the Voltage Probe table identifying the voltage probe monitoring this input range. 0 indicates no probe provided. |
| 1.3.6.1.4.1.412.2.4.16.1.10 | Columnrange1ElectricalCurrentProbeIndexAtt10 | read-only | mandatory | Index into the Elelctrical Current Probe table identifying the Electrical current probe monitoring this input range. 0 indicates no probe provided. |
| 1.3.6.1.4.1.412.2.4.16.1.11 | Columnrange2InputVoltageLowAtt11 | read-only | mandatory | The low voltage of Input Voltage Range 2 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.16.1.12 | Columnrange2InputVoltageHighAtt12 | read-only | mandatory | The high voltage of Input Voltage Range 2 for this Power Supply, in millivolts. A value of 0x80000000 denotes 'unknown' |
| 1.3.6.1.4.1.412.2.4.16.1.13 | Columnrange2VoltageProbeIndexAtt13 | read-only | mandatory | Index into the Voltage Probe table identifying the voltage probe monitoring this input range. 0 indicates no probe provided. |
| 1.3.6.1.4.1.412.2.4.16.1.14 | Columnrange2CurrentProbeIndexAtt14 | read-only | mandatory | Index into the Current Probe table identifying the current probe monitoring this input range. 0 indicates no probe provided. |
| 1.3.6.1.4.1.412.2.4.16.1.15 | ColumnactiveInputVoltageRangeAtt15 | read-only | mandatory | The value of this attribute indicates which input voltage range of this Power Supply is currently active. |
| 1.3.6.1.4.1.412.2.4.16.1.16 | ColumninputVoltageRangeSwitchingAtt16 | read-only | mandatory | This attribute describes the kind of input voltage range switching that is implemented in this power supply. |
| 1.3.6.1.4.1.412.2.4.16.1.17 | Columnrange1InputFrequencyLowAtt17 | read-only | mandatory | The frequency at the low end of this power supply's Input Frequency Range 1. A value of zero implies DC. A value of 0x80000000 denotes 'unknown' |
| 1.3.6.1.4.1.412.2.4.16.1.18 | Columnrange1InputFrequencyHighAtt18 | read-only | mandatory | The frequency at the high end of this power supply's Input Frequency Range 1. A value of zero implies DC. A value of 0x80000000 denotes 'unknown' |
| 1.3.6.1.4.1.412.2.4.16.1.19 | Columnrange2InputFrequencyLowAtt19 | read-only | mandatory | The frequency at the low end of this power supply's Input Frequency Range 2. A value of zero implies DC. A value of 0x80000000 denotes 'unknown' |
| 1.3.6.1.4.1.412.2.4.16.1.20 | Columnrange2InputFrequencyHighAtt20 | read-only | mandatory | The frequency at the high end of this power supply's Input Frequency Range 2. A value of zero implies DC. A value of 0x80000000 denotes 'unknown' |
| 1.3.6.1.4.1.412.2.4.16.1.21 | ColumntotalOutputPowerAtt21 | read-only | mandatory | This attribute value represents the total output power of this power supply in milliWatts. 0x80000000 denotes 'unknown' |
| 1.3.6.1.4.1.412.2.4.16.2 | NodedMTFPowerSupplyEvt2 | powerControlRequest | ||
| 1.3.6.1.4.1.412.2.4.16.6 | RowdMTFPowerSupplyEvSys | not-accessible | mandatory | The major functional aspect of the product causing the fault. |
| 1.3.6.1.4.1.412.2.4.16.7 | RowdMTFPowerSupplyEvSub | not-accessible | mandatory | The minor functional aspect of the product causing the fault. |
| 1.3.6.1.4.1.412.2.4.17 | TabledMTFCoolingDeviceTable | not-accessible | mandatory | This group defines various attributes for cooling devices in this system. |
| 1.3.6.1.4.1.412.2.4.17.1 | RowdMTFCoolingDeviceEntry | not-accessible | mandatory | This group defines various attributes for cooling devices in this system. |
| 1.3.6.1.4.1.412.2.4.17.1 | NodedMTFCoolingDeviceEvt1 | coolingDeviceStatusChange | ||
| 1.3.6.1.4.1.412.2.4.17.1.0 | ColumndMTFCoolingDeviceState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.17.1.1 | ColumncoolingDeviceTableIndexAtt1 | read-only | mandatory | An index into the cooling device table. |
| 1.3.6.1.4.1.412.2.4.17.1.2 | ColumnfRUGroupIndexAtt2 | read-only | mandatory | If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a … |
| 1.3.6.1.4.1.412.2.4.17.1.3 | ColumnoperationalGroupIndexAtt3 | read-only | mandatory | The index into the Operational State table for this device. |
| 1.3.6.1.4.1.412.2.4.17.1.4 | ColumncoolingUnitIndexAtt4 | read-only | mandatory | This is the ID of the Cooling Unit (logical cooling device) of which this Cooling Device is a part. This value matches up with the Cooling Unit Table Index att… |
| 1.3.6.1.4.1.412.2.4.17.1.5 | ColumncoolingDeviceTypeAtt5 | read-only | mandatory | The type of Cooling Device that this is e.g. Fan, Heat Pipe, etc. |
| 1.3.6.1.4.1.412.2.4.17.1.6 | ColumntemperatureProbeIndexAtt6 | read-only | mandatory | Index into the Temperature Probe table identifying the temperatu e probe monitoring this cooling device. 0 indicates no probe provided. |
| 1.3.6.1.4.1.412.2.4.17.2 | NodedMTFCoolingDeviceEvt2 | temperatureFault | ||
| 1.3.6.1.4.1.412.2.4.17.6 | RowdMTFCoolingDeviceEvSys | not-accessible | mandatory | The major functional aspect of the product causing the fault. |
| 1.3.6.1.4.1.412.2.4.17.7 | RowdMTFCoolingDeviceEvSub | not-accessible | mandatory | The minor functional aspect of the product causing the fault. |
| 1.3.6.1.4.1.412.2.4.18 | TabledMTFSystemSlotsTable | not-accessible | mandatory | This group defines the attributes for the different system expansion slots supported in this system. |
| 1.3.6.1.4.1.412.2.4.18.1 | RowdMTFSystemSlotsEntry | not-accessible | mandatory | This group defines the attributes for the different system expansion slots supported in this system. |
| 1.3.6.1.4.1.412.2.4.18.1.0 | ColumndMTFSystemSlotsState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.18.1.1 | ColumnslotIndexAtt1 | read-only | mandatory | An index into the system slot table. This is the hardware ID number for each expansion slot, whether it is occupied or not (starting with 1). |
| 1.3.6.1.4.1.412.2.4.18.1.2 | ColumnslotTypeAtt2 | read-only | mandatory | The bus type supported in this slot. This is a bit field with the following definitions: Bit 0 (2^0), if 1, it is a long-length card; if 0, it is a short-lengt… |
| 1.3.6.1.4.1.412.2.4.18.1.3 | ColumnslotWidthAtt3 | read-only | mandatory | The maximum bus width of cards accepted in this slot. |
| 1.3.6.1.4.1.412.2.4.18.1.4 | ColumncurrentUsageAtt4 | read-only | mandatory | Is this slot is currently in use? |
| 1.3.6.1.4.1.412.2.4.18.1.5 | ColumnslotDescriptionAtt5 | read-only | mandatory | The card currently occupying this slot. |
| 1.3.6.1.4.1.412.2.4.18.1.6 | ColumnslotCategoryAtt6 | read-only | mandatory | The word 'slot' is used to refer to bus slots. The last case (motherboard) refers to situations where a functional element is integrated onto, say, a motherboa… |
| 1.3.6.1.4.1.412.2.4.18.1.7 | ColumnvirtualSlotAtt7 | read-only | mandatory | This attribute indicates whether this is a 'virtual slot' or not. A 'virtual slot' is an expansion site that is permanently occupied because of the level of in… |
| 1.3.6.1.4.1.412.2.4.18.1.8 | ColumnresourceUserIDAtt8 | read-only | mandatory | Value used to locate the rows in the System Resources 2 table for the resources associated with this slot or expansion site. 0 = 'unspecified . |
| 1.3.6.1.4.1.412.2.4.29 | TabledMTFFRUTable | not-accessible | mandatory | A Field Replaceable Unit (FRU), is defined as a hardware component which is designed to be separately removable for replacement or repair. For the purposes of … |
| 1.3.6.1.4.1.412.2.4.29.1 | RowdMTFFRUEntry | not-accessible | mandatory | A Field Replaceable Unit (FRU), is defined as a hardware component which is designed to be separately removable for replacement or repair. For the purposes of … |
| 1.3.6.1.4.1.412.2.4.29.1.0 | ColumndMTFFRUState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.29.1.1 | ColumnfRUIndexAtt1 | read-only | mandatory | The index into the Field Replaceable Unit table. |
| 1.3.6.1.4.1.412.2.4.29.1.2 | ColumndeviceGroupIndexAtt2 | read-only | mandatory | The group ID of the group referencing this Field Replaceable Unit instance. |
| 1.3.6.1.4.1.412.2.4.29.1.3 | ColumndescriptionAtt3 | read-only | mandatory | A clear description of this Field Replaceable Unit. |
| 1.3.6.1.4.1.412.2.4.29.1.4 | ColumnmanufacturerAtt4 | read-only | mandatory | The name of the company manufacturing or providing this Field Replaceable Unit. |
| 1.3.6.1.4.1.412.2.4.29.1.5 | ColumnmodelAtt5 | read-only | mandatory | The manufacturer's model number for this Field Replaceable Unit. |
| 1.3.6.1.4.1.412.2.4.29.1.6 | ColumnpartNumberAtt6 | read-only | mandatory | A part number by which a replacement part can be ordered for this Field Replaceable Unit. |
| 1.3.6.1.4.1.412.2.4.29.1.7 | ColumnfRUSerialNumberAtt7 | read-only | mandatory | The manufacturer's serial number for this Field Replaceable Unit. |
| 1.3.6.1.4.1.412.2.4.29.1.8 | ColumnrevisionLevelAtt8 | read-only | mandatory | The revision level of this Field Replaceable Unit. |
| 1.3.6.1.4.1.412.2.4.29.1.9 | ColumnwarrantyStartDateAtt9 | read-only | mandatory | The start date of the service warranty for this Field Replaceabl Unit. |
| 1.3.6.1.4.1.412.2.4.29.1.10 | ColumnwarrantyDurationAtt10 | read-only | mandatory | The total duration of this Field Replaceable Unit warranty in months. |
| 1.3.6.1.4.1.412.2.4.29.1.11 | ColumnsupportPhoneNumberAtt11 | read-only | mandatory | The phone number(s) for support for this Field Replaceable Unit. |
| 1.3.6.1.4.1.412.2.4.29.1.12 | ColumnfRUInternetUniformResourceLocatorAtt12 | read-only | mandatory | The Internet Uniform Resource Locator string that can be used through a World Wide Web browser to obtain further information about this FRU |
| 1.3.6.1.4.1.412.2.4.30 | TabledMTFOperationalStateTable | not-accessible | mandatory | This group provides the operational state, usage, and availabili y status,and administrative state indicators for specific Device Group instances |
| 1.3.6.1.4.1.412.2.4.30.1 | RowdMTFOperationalStateEntry | not-accessible | mandatory | This group provides the operational state, usage, and availabili y status,and administrative state indicators for specific Device Group instances |
| 1.3.6.1.4.1.412.2.4.30.1.0 | ColumndMTFOperationalStateState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.30.1.1 | ColumnoperationalStateInstanceIndexAtt1 | read-only | mandatory | The Index into the Operational State table. |
| 1.3.6.1.4.1.412.2.4.30.1.2 | ColumndeviceGroupIndexAtt2-1 | read-only | mandatory | The group ID of the group referencing this instance. |
| 1.3.6.1.4.1.412.2.4.30.1.3 | ColumnoperationalStatusAtt3 | read-only | mandatory | The operational status of the Device Group instance. |
| 1.3.6.1.4.1.412.2.4.30.1.4 | ColumnusageStateAtt4 | read-only | mandatory | The usage state of the Device Group instance. |
| 1.3.6.1.4.1.412.2.4.30.1.5 | ColumnavailabilityStatusAtt5 | read-only | mandatory | The availability status of the Device Group instance. |
| 1.3.6.1.4.1.412.2.4.30.1.6 | ColumnadministrativeStateAtt6 | read-only | mandatory | The administrative state of the Device Group instance. |
| 1.3.6.1.4.1.412.2.4.30.1.7 | ColumnfatalErrorCountAtt7 | read-only | mandatory | The accumulated Fatal or Non-recoverable error count for this Device Group instance. |
| 1.3.6.1.4.1.412.2.4.30.1.8 | ColumnmajorErrorCountAtt8 | read-only | mandatory | The accumulated Major or Critical error count for this Device Group instance. |
| 1.3.6.1.4.1.412.2.4.30.1.9 | ColumnwarningErrorCountAtt9 | read-only | mandatory | The accumulated Warning or Non-Critical error count for this Device Group instance. |
| 1.3.6.1.4.1.412.2.4.30.1.10 | ColumncurrentErrorStatusAtt10 | read-only | mandatory | This attribute presents the current error status for this Device Group instance. The most critical error status in effect should be presented. I.e. if a part o… |
| 1.3.6.1.4.1.412.2.4.30.1.11 | ColumndevicePredictedFailureStatusAtt11 | read-only | mandatory | Enumeration describing the current Device Predicted Failure Status (e.g.: the S.M.A.R.T. status of the device). |
| 1.3.6.1.4.1.412.2.4.33 | TabledMTFPhysicalMemoryArrayTable | not-accessible | mandatory | This group represents an array of physical memory as a collectio of one or more Memory Devices associated in sets and partitions. |
| 1.3.6.1.4.1.412.2.4.33.1 | RowdMTFPhysicalMemoryArrayEntry | not-accessible | mandatory | This group represents an array of physical memory as a collectio of one or more Memory Devices associated in sets and partitions. |
| 1.3.6.1.4.1.412.2.4.33.1 | NodedMTFPhysicalMemoryArrayEvt1 | memoryError | ||
| 1.3.6.1.4.1.412.2.4.33.1.0 | ColumndMTFPhysicalMemoryArrayState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.33.1.1 | ColumnmemoryArrayTableIndexAtt1 | read-only | mandatory | A unique number that identifies this row. |
| 1.3.6.1.4.1.412.2.4.33.1.2 | ColumnmemoryArrayLocationAtt2 | read-only | mandatory | The physical location of the Memory Array, whether on the system board or an add-on board. |
| 1.3.6.1.4.1.412.2.4.33.1.3 | ColumnmemoryArrayUseAtt3 | read-only | mandatory | What this Memory Array is used for. |
| 1.3.6.1.4.1.412.2.4.33.1.4 | ColumnmaximumMemoryCapacityAtt4 | read-only | mandatory | The maximum memory capacity, in kilobytes, on this array. 0x80000000denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.33.1.5 | ColumnnumberOfMemoryDeviceSocketsAtt5 | read-only | mandatory | The number of SIMM slots or sockets available for Memory Devices in this array. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.33.1.6 | ColumnnumberOfMemoryDeviceSocketsUsedAtt6 | read-only | mandatory | The number of SIMM slots or sockets in use for Memory Devices in this array. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.33.1.7 | ColumnmemoryErrorCorrectionAtt7 | read-only | mandatory | The main hardware error correction or detection method supported by this Memory Array. |
| 1.3.6.1.4.1.412.2.4.33.1.8 | ColumnarrayErrorTypeAtt8 | read-only | mandatory | The type of error that is associated with the current status reported in Operational State for this Memory Array. |
| 1.3.6.1.4.1.412.2.4.33.1.9 | ColumnlastErrorUpdateAtt9 | read-only | mandatory | System state during which last error status was collected. |
| 1.3.6.1.4.1.412.2.4.33.1.10 | ColumnerrorOperationAtt10 | read-only | mandatory | The memory access operation that caused the current error. |
| 1.3.6.1.4.1.412.2.4.33.1.11 | ColumnerrorDataSizeAtt11 | read-only | mandatory | The size of the data transfer that caused the error, in bits. Zero indicates no error, 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.33.1.12 | ColumnerrorDataAtt12 | read-only | mandatory | Data captured during the erroneous Memory Array access. The data occupy the first n bytes of the octet string required to hold 'Error Data Size' bits of the da… |
| 1.3.6.1.4.1.412.2.4.33.1.13 | ColumnvendorSyndromeAtt13 | read-only | mandatory | Vendor-specific syndrome or CRC data associated with the erroneous access. |
| 1.3.6.1.4.1.412.2.4.33.1.14 | ColumnerrorAddressAtt14 | read-only | mandatory | Physical address of the error based on the addressing of the bus that the Memory Array is connected to. 0x8000 0000 0000 0000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.33.1.15 | ColumnerrorResolutionAtt15 | read-only | mandatory | Range in bytes that the error can be determined to be within, when an Error Address is given. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.33.1.16 | ColumnfRUGroupIndexAtt16 | read-only | mandatory | If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a … |
| 1.3.6.1.4.1.412.2.4.33.1.17 | ColumnoperationalGroupIndexAtt17 | read-only | mandatory | The index into the Operational State Table for this Memory Array. The Operational State row is used to hold the overall error count and error status for this a… |
| 1.3.6.1.4.1.412.2.4.33.2 | NodedMTFPhysicalMemoryArrayEvt2 | initializationFailure | ||
| 1.3.6.1.4.1.412.2.4.33.6 | RowdMTFPhysicalMemoryArrayEvSys | not-accessible | mandatory | The major functional aspect of the product causing the fault. |
| 1.3.6.1.4.1.412.2.4.33.7 | RowdMTFPhysicalMemoryArrayEvSub | not-accessible | mandatory | The minor functional aspect of the product causing the fault. |
| 1.3.6.1.4.1.412.2.4.34 | TabledMTFMemoryArrayMappedAddressesTable | not-accessible | mandatory | This table presents ranges of physical addresses that are mapped to a given Memory Array. |
| 1.3.6.1.4.1.412.2.4.34.1 | RowdMTFMemoryArrayMappedAddressesEntry | not-accessible | mandatory | This table presents ranges of physical addresses that are mapped to a given Memory Array. |
| 1.3.6.1.4.1.412.2.4.34.1.0 | ColumndMTFMemoryArrayMappedAddressesState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.34.1.1 | ColumnmemoryArrayMappedAddressesTableIndexAtt1 | read-only | mandatory | A unique number that identifies this row. |
| 1.3.6.1.4.1.412.2.4.34.1.2 | ColumnmemoryArrayIndexAtt2 | read-only | mandatory | The ID of the Memory Array that this address range is mapped to. Multiple address ranges may be mapped to a Memory Array. |
| 1.3.6.1.4.1.412.2.4.34.1.3 | ColumnmappedRangeStartingAddressAtt3 | read-only | mandatory | The physical starting address, in kilobytes, of a range of memory mapped to the specified Memory Array. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.34.1.4 | ColumnmappedRangeEndingAddressAtt4 | read-only | mandatory | The physical ending address of the last kilobyte of a range of addresses mapped to the specified Memory Array. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.34.1.5 | ColumnpartitionIDAtt5 | read-only | mandatory | Identifies a Memory Partition associated with the Memory Array specified by Memory Array Table Index. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.34.1.6 | ColumnpartitionWidthAtt6 | read-only | mandatory | The number of Memory Devices that form a single row of memory for the partition. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.34.1.7 | ColumnoperationalGroupIndexAtt7 | read-only | mandatory | The index into the Operational State Table for this Memory Range. Generally, there will be a 1:1 correspondence between a mapped range and a partition. In whic… |
| 1.3.6.1.4.1.412.2.4.35 | TabledMTFMemoryDeviceTable | not-accessible | mandatory | This group presents information about individual memory devices in the system. A memory device can be a SIMM, a SIPP, or a single chip, or an entire card-based… |
| 1.3.6.1.4.1.412.2.4.35.1 | RowdMTFMemoryDeviceEntry | not-accessible | mandatory | This group presents information about individual memory devices in the system. A memory device can be a SIMM, a SIPP, or a single chip, or an entire card-based… |
| 1.3.6.1.4.1.412.2.4.35.1.0 | ColumndMTFMemoryDeviceState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.35.1.1 | ColumnmemoryDeviceTableIndexAtt1 | read-only | mandatory | A unique number that identifies this row. |
| 1.3.6.1.4.1.412.2.4.35.1.2 | ColumnmemoryArrayIndexAtt2-1 | read-only | mandatory | The ID of the Memory Array that this Memory Device is a part of. |
| 1.3.6.1.4.1.412.2.4.35.1.3 | ColumndeviceLocatorAtt3 | read-only | mandatory | A string identifying the physically labeled socket or board position where the memory device is located. Eg. 'SIMM 3' or 'IC12'. |
| 1.3.6.1.4.1.412.2.4.35.1.4 | ColumnbankLocatorAtt4 | read-only | mandatory | A string identifying the physically labeled bank where the memory device is located. Eg. 'Bank 0' or 'A'. |
| 1.3.6.1.4.1.412.2.4.35.1.5 | ColumnsizeAtt5 | read-only | mandatory | Size of this memory device, in bytes. |
| 1.3.6.1.4.1.412.2.4.35.1.6 | ColumnformFactorAtt6 | read-only | mandatory | Implementation form factor for this memory device. |
| 1.3.6.1.4.1.412.2.4.35.1.7 | ColumntotalWidthAtt7 | read-only | mandatory | Total width of this memory device, including check or error correction bits, in bits. If there are no error correction bits, the value in this attribute should… |
| 1.3.6.1.4.1.412.2.4.35.1.8 | ColumndataWidthAtt8 | read-only | mandatory | Data width of this memory device, in bits. A data width of 0 and a Total Width of 8 would indicate that the device is solely being used to provide eight error … |
| 1.3.6.1.4.1.412.2.4.35.1.9 | ColumnmemoryTypeAtt9 | read-only | mandatory | Type of memory used in this memory device. |
| 1.3.6.1.4.1.412.2.4.35.1.10 | ColumntypeDetailAtt10 | read-only | mandatory | Additional detail on the device type. |
| 1.3.6.1.4.1.412.2.4.35.1.11 | ColumndeviceSetAtt11 | read-only | mandatory | This attribute is used to identify when the Memory Device is one of a set of Memory Devices that must be populated with all devices of the same type and size, … |
| 1.3.6.1.4.1.412.2.4.35.1.12 | ColumndeviceErrorTypeAtt12 | read-only | mandatory | The type of error that is associated with the current status reported in Operational State for this Memory Device. |
| 1.3.6.1.4.1.412.2.4.35.1.13 | ColumnerrorGranularityAtt13 | read-only | mandatory | Specifies whether the current error's location can be resolved to the partition or device level. |
| 1.3.6.1.4.1.412.2.4.35.1.14 | ColumnlastErrorUpdateAtt14 | read-only | mandatory | System state during which the last error update was collected. |
| 1.3.6.1.4.1.412.2.4.35.1.15 | ColumnerrorOperationAtt15 | read-only | mandatory | The memory access operation that caused the current error. |
| 1.3.6.1.4.1.412.2.4.35.1.16 | ColumnerrorDataSizeAtt16 | read-only | mandatory | The size of the data transfer that caused the error,in bits. Zero indicates no error, 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.35.1.17 | ColumnerrorDataAtt17 | read-only | mandatory | Data captured during the erroneous Memory Array access. The data occupies the first n bytes of the octet string required to hold 'Error Data Size' bits of the … |
| 1.3.6.1.4.1.412.2.4.35.1.18 | ColumnvendorSyndromeAtt18 | read-only | mandatory | Vendor-specific syndrome or CRC data associated with the erroneous access. |
| 1.3.6.1.4.1.412.2.4.35.1.19 | ColumndeviceErrorAddressAtt19 | read-only | mandatory | Physical address of the error relative to the start of the device, in bytes. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.35.1.20 | ColumnarrayErrorAddressAtt20 | read-only | mandatory | Physical address of the kilobyte where the error is located, relative to the bus for the Memory Array. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.35.1.21 | ColumnerrorResolutionAtt21 | read-only | mandatory | Range in bytes that the error can be determined to be within,whe an Error Address is given. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.35.1.22 | ColumnfRUGroupIndexAtt22 | read-only | mandatory | If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a … |
| 1.3.6.1.4.1.412.2.4.35.1.23 | ColumnoperationalGroupIndexAtt23 | read-only | mandatory | The index into the Operational State Table for this device. |
| 1.3.6.1.4.1.412.2.4.36 | TabledMTFMemoryDeviceMappedAddressesTable | not-accessible | mandatory | This table presents ranges of physical addresses that are mapped to a given Memory Device Set. |
| 1.3.6.1.4.1.412.2.4.36.1 | RowdMTFMemoryDeviceMappedAddressesEntry | not-accessible | mandatory | This table presents ranges of physical addresses that are mapped to a given Memory Device Set. |
| 1.3.6.1.4.1.412.2.4.36.1.0 | ColumndMTFMemoryDeviceMappedAddressesState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.36.1.1 | ColumnmemoryDeviceMappedAddressesTableIndexAtt1 | read-only | mandatory | A unique number that identifies this row. |
| 1.3.6.1.4.1.412.2.4.36.1.2 | ColumnmemoryDeviceSetIDAtt2 | read-only | mandatory | The row in the Memory Device table that this address range is for. This matches with a Memory Device Table Index. There may be multiple rows in Memory Device M… |
| 1.3.6.1.4.1.412.2.4.36.1.3 | ColumnpartitionAtt3 | read-only | mandatory | Identifies the Memory partition in the Memory Array Mapped Addresses table that this Memory Device is part of. Partition number should be positive. 0x80000000 … |
| 1.3.6.1.4.1.412.2.4.36.1.4 | ColumnmappedRangeStartingAddressAtt4 | read-only | mandatory | The physical starting address, in kilobytes, of a range of memory mapped to the specified Memory Device set. The address is specified relative to the bus that … |
| 1.3.6.1.4.1.412.2.4.36.1.5 | ColumnmappedRangeEndingAddressAtt5 | read-only | mandatory | The physical ending address of the last kilobyte of a range of addresses mapped to the specified Memory Device. The address is specified relative to the bus th… |
| 1.3.6.1.4.1.412.2.4.36.1.6 | ColumnpartitionRowPositionAtt6 | read-only | mandatory | This specifies the position of the device in a row of the partition. For example, if it takes two 8-bit memory devices to form a 16-bit row, then a value of '2… |
| 1.3.6.1.4.1.412.2.4.36.1.7 | ColumninterleavePositionAtt7 | read-only | mandatory | The position of this device in an interleave. 0 indicates non-interleaved. 1 indicates the first position 2 the second, and so on. For example, in a 2:1 interl… |
| 1.3.6.1.4.1.412.2.4.36.1.8 | ColumndataDepthAtt8 | read-only | mandatory | The maximum number of consecutive rows accessed from this device in a single interleaved transfer. For example, if a device transfers two rows each time it is … |
| 1.3.6.1.4.1.412.2.4.37 | TabledMTFSystemResources2Table | not-accessible | mandatory | This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system. |
| 1.3.6.1.4.1.412.2.4.37.1 | RowdMTFSystemResources2Entry | not-accessible | mandatory | This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system. |
| 1.3.6.1.4.1.412.2.4.37.1.0 | ColumndMTFSystemResources2State | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.37.1.1 | ColumnsystemResourcesIndexAtt1 | read-only | mandatory | A number that uniquely identifies the rows in this table. |
| 1.3.6.1.4.1.412.2.4.37.1.2 | ColumnresourceUserAtt2 | read-only | mandatory | A unique number for each different 'resource user' that has resources specified in this table. |
| 1.3.6.1.4.1.412.2.4.37.1.3 | ColumnresourceSetAtt3 | read-only | mandatory | A number used as the ID of a set of Memory, I/O, DMA and/or INT resources for the resource user. |
| 1.3.6.1.4.1.412.2.4.37.1.4 | ColumnresourceAssignmentAtt4 | read-only | mandatory | Describes the state of the assignment of this set of resources. (Note: This value must be the same for all resources within a given set.) |
| 1.3.6.1.4.1.412.2.4.37.1.5 | ColumnresourceTypeAtt5 | read-only | mandatory | The type of resource described by this row. |
| 1.3.6.1.4.1.412.2.4.37.1.6 | ColumnresourceNumberAtt6 | read-only | mandatory | DMA or IRQ number - 0 for Memory and I/O ranges. This is the interrupt or DMA number relative to the bus that the interrupt is sourced from. |
| 1.3.6.1.4.1.412.2.4.37.1.7 | ColumnresourceInfoIDAtt7 | read-only | mandatory | ID of the row in the 'Info' table for this type of system resource. E.g. if this Resource Type is 'I/O' then this would be an index into the 'System Resource I… |
| 1.3.6.1.4.1.412.2.4.37.1.8 | ColumnstartAddressAtt8 | read-only | mandatory | Starting physical address for this memory range, or the minimum base address if this attribute is being used to describe a programmable range. 0 for IRQ and DM… |
| 1.3.6.1.4.1.412.2.4.37.1.9 | ColumnendAddressAtt9 | read-only | mandatory | Ending physical address (address of last byte) for this memory range, or the maximum configurable base address if this attribute is being used to describe a pr… |
| 1.3.6.1.4.1.412.2.4.37.1.10 | ColumnresourceSizeAtt10 | read-only | mandatory | jNumber of consecutive bytes that a memory or I/O resource consumes. 0 for IRQ and DMA resources. |
| 1.3.6.1.4.1.412.2.4.37.1.11 | ColumnbaseAlignmentAtt11 | read-only | mandatory | Alignment of Start Address, in bytes. Indicates the granularity of the increments in which a programmable range can be set. |
| 1.3.6.1.4.1.412.2.4.37.1.12 | ColumnshareableAtt12 | read-only | mandatory | Indicates whether the resource is shareable. |
| 1.3.6.1.4.1.412.2.4.37.1.13 | ColumnsharedAtt13 | read-only | mandatory | Indicates whether this resource, or a portion of this resource, is shared with another device. |
| 1.3.6.1.4.1.412.2.4.38 | TabledMTFSystemResourceDeviceInfoTable | not-accessible | mandatory | This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system. |
| 1.3.6.1.4.1.412.2.4.38.1 | RowdMTFSystemResourceDeviceInfoEntry | not-accessible | mandatory | This group describes the base level of Memory, I/O, DMA, and INT (interrupt) resources that are used by a device in the system. |
| 1.3.6.1.4.1.412.2.4.38.1.0 | ColumndMTFSystemResourceDeviceInfoState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.38.1.1 | ColumnresourceUserAtt1 | read-only | mandatory | A number that uniquely identifies this device. This number may be derived from the 'device number' that is assigned by 'Plug N Play', or may be uniquely assign… |
| 1.3.6.1.4.1.412.2.4.38.1.2 | ColumndeviceIDAtt2 | read-only | mandatory | Physical Device ID from Config manager info. Equal to the CISTPL-MANFID field for PCMCIA devices. 0xFFFFFFFF = Unknown |
| 1.3.6.1.4.1.412.2.4.38.1.3 | ColumndeviceSerialNumberAtt3 | read-only | mandatory | Device Serial Number from Config manager info. 0 = Undefined |
| 1.3.6.1.4.1.412.2.4.38.1.4 | ColumnlogicalDeviceIDClassCodeAtt4 | read-only | mandatory | Logical device ID for PnP ISA devices, Class code for PCI devices, CISTPL-FUNCID for PCMCIA devices. 0xFFFFFFFF = Undefined, 0 = reserved |
| 1.3.6.1.4.1.412.2.4.38.1.5 | ColumndeviceFlagsAtt5 | read-only | mandatory | Device flags from config manager info. Bit 0: 1 = device has been initialized, Bit 1: 1 = device is enabled, Bit 2: 1 = device config has been locked, Bit 3: 1… |
| 1.3.6.1.4.1.412.2.4.38.1.6 | ColumndeviceNumberAtt6 | read-only | mandatory | Device Number for PCI Devices, Logical Device number for PnP Devices. 0 otherwise. |
| 1.3.6.1.4.1.412.2.4.38.1.7 | ColumnfunctionNumberAtt7 | read-only | mandatory | Function Number for PCI & EISA Devices. 0 otherwise. |
| 1.3.6.1.4.1.412.2.4.38.1.8 | ColumnbusTypeAtt8 | read-only | mandatory | Bus number (0-255) for PCI Devices, Slot number for EISA and PnP Devices, Card logical socket number for PCMCIA devices. Zero otherwise. |
| 1.3.6.1.4.1.412.2.4.38.1.9 | ColumncMReservedAtt9 | read-only | mandatory | Data from the Reserved field of the Configuration Manager bus access structure, or 0. |
| 1.3.6.1.4.1.412.2.4.39 | TabledMTFSystemResourceMemoryInfoTable | not-accessible | mandatory | This group presents additional information about memory resource that have been defined in the System Resources table. |
| 1.3.6.1.4.1.412.2.4.39.1 | RowdMTFSystemResourceMemoryInfoEntry | not-accessible | mandatory | This group presents additional information about memory resource that have been defined in the System Resources table. |
| 1.3.6.1.4.1.412.2.4.39.1.0 | ColumndMTFSystemResourceMemoryInfoState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.39.1.1 | ColumnsystemResourceMemoryInfoIndexAtt1 | read-only | mandatory | A number the uniquely identifies rows in this table. |
| 1.3.6.1.4.1.412.2.4.39.1.2 | ColumniSAPCMCIARangeDescriptorAtt2 | read-only | mandatory | For PnP ISA/PCMCIA memory range descriptor compatibility. |
| 1.3.6.1.4.1.412.2.4.39.1.3 | ColumneISARangeDescriptorAtt3 | read-only | mandatory | For PnP EISA memory range descriptor compatibility. |
| 1.3.6.1.4.1.412.2.4.39.1.4 | ColumndecodeSupportAtt4 | read-only | mandatory | For PnP memory range descriptor compatibility. |
| 1.3.6.1.4.1.412.2.4.39.1.5 | ColumncacheableAtt5 | read-only | mandatory | Indicates whether it is allowable for this memory range to be cached or not. |
| 1.3.6.1.4.1.412.2.4.39.1.6 | ColumncacheTypeAtt6 | read-only | mandatory | Indicates Cache Type that is compatible with this resource. |
| 1.3.6.1.4.1.412.2.4.39.1.7 | ColumnreadWriteAtt7 | read-only | mandatory | Indicates the read-write accessibility of this memory resource. |
| 1.3.6.1.4.1.412.2.4.40 | TabledMTFSystemResourceIOInfoTable | not-accessible | mandatory | This group presents additional information about I/O resources that have been defined in the System Resources table. |
| 1.3.6.1.4.1.412.2.4.40.1 | RowdMTFSystemResourceIOInfoEntry | not-accessible | mandatory | This group presents additional information about I/O resources that have been defined in the System Resources table. |
| 1.3.6.1.4.1.412.2.4.40.1.0 | ColumndMTFSystemResourceIOInfoState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.40.1.1 | ColumnsystemResourceIOInfoIndexAtt1 | read-only | mandatory | A number the uniquely identifies rows in this table. |
| 1.3.6.1.4.1.412.2.4.40.1.2 | ColumniODecodeAtt2 | read-only | mandatory | Number of bits used for I/O decode |
| 1.3.6.1.4.1.412.2.4.41 | TabledMTFSystemResourceIRQInfoTable | not-accessible | mandatory | This group presents additional information about I/O resources that have been defined in the System Resources table. |
| 1.3.6.1.4.1.412.2.4.41.1 | RowdMTFSystemResourceIRQInfoEntry | not-accessible | mandatory | This group presents additional information about I/O resources that have been defined in the System Resources table. |
| 1.3.6.1.4.1.412.2.4.41.1.0 | ColumndMTFSystemResourceIRQInfoState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.41.1.1 | ColumnsystemResourceIRQInfoIndexAtt1 | read-only | mandatory | A number the uniquely identifies rows in this table. |
| 1.3.6.1.4.1.412.2.4.41.1.2 | ColumntriggerTypeAtt2 | read-only | mandatory | The trigger type for this interrupt. |
| 1.3.6.1.4.1.412.2.4.41.1.3 | ColumntriggerLevelAtt3 | read-only | mandatory | The trigger level for this interrupt. |
| 1.3.6.1.4.1.412.2.4.42 | TabledMTFSystemResourceDMAInfoTable | not-accessible | mandatory | This group presents additional information about DMA resources that have been defined in the System Resources table. |
| 1.3.6.1.4.1.412.2.4.42.1 | RowdMTFSystemResourceDMAInfoEntry | not-accessible | mandatory | This group presents additional information about DMA resources that have been defined in the System Resources table. |
| 1.3.6.1.4.1.412.2.4.42.1.0 | ColumndMTFSystemResourceDMAInfoState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.42.1.1 | ColumnsystemResourceDMAInfoIndexAtt1 | read-only | mandatory | A number the uniquely identifies rows in this table. |
| 1.3.6.1.4.1.412.2.4.42.1.2 | ColumndMATransferWidthAtt2 | read-only | mandatory | Width of DMA transfers supported |
| 1.3.6.1.4.1.412.2.4.42.1.3 | ColumndMAAddressSizeAtt3 | read-only | mandatory | The width of the DMA address. |
| 1.3.6.1.4.1.412.2.4.42.1.4 | ColumndMAMaximumTransferSizeAtt4 | read-only | mandatory | The maximum number of bytes that can be transferred by this DMA Channel. |
| 1.3.6.1.4.1.412.2.4.42.1.5 | ColumndMATransferPreferenceAtt5 | read-only | mandatory | DMA transfer type preference. |
| 1.3.6.1.4.1.412.2.4.42.1.6 | ColumnbusMasterAtt6 | read-only | mandatory | Indicates whether the device is using DMA is a bus master. |
| 1.3.6.1.4.1.412.2.4.42.1.7 | ColumnbyteModeAtt7 | read-only | mandatory | Indicates whether DMA may execute in 'count by byte' mode. |
| 1.3.6.1.4.1.412.2.4.42.1.8 | ColumnwordModeAtt8 | read-only | mandatory | Indicates whether DMA may execute in 'count by word' mode. |
| 1.3.6.1.4.1.412.2.4.42.1.9 | ColumnchannelTimingAtt9 | read-only | mandatory | DMA channel speed support. |
| 1.3.6.1.4.1.412.2.4.42.1.10 | ColumntypeCTimingAtt10 | read-only | mandatory | Indicates whether C type (burst) timing is supported. |
| 1.3.6.1.4.1.412.2.4.49 | TabledMTFSystemHardwareSecurityTable | not-accessible | mandatory | This group describes the system-wide hardware security settings. |
| 1.3.6.1.4.1.412.2.4.49.1 | RowdMTFSystemHardwareSecurityEntry | not-accessible | mandatory | This group describes the system-wide hardware security settings. |
| 1.3.6.1.4.1.412.2.4.49.1.1 | ColumnpowerOnPasswordStatusAtt1 | read-only | mandatory | The current power-on password setting on the system. |
| 1.3.6.1.4.1.412.2.4.49.1.2 | ColumnkeyboardPasswordStatusAtt2 | read-only | mandatory | The current keyboard password setting on the system |
| 1.3.6.1.4.1.412.2.4.49.1.3 | ColumnadministratorPasswordStatisAtt3 | read-only | mandatory | The current administrator password setting on the system. This password is required to make hardware configuration changes to the system. |
| 1.3.6.1.4.1.412.2.4.49.1.4 | ColumnfrontPanelResetStatusAtt4 | read-only | mandatory | The present status of the front panel reset button capability. If Enabled, the machine can be reset via the front panel reset button. If Disabled, the reset bu… |
| 1.3.6.1.4.1.412.2.4.51 | TabledMTFSystemPowerControlsTable | not-accessible | mandatory | This group defines attributes for controlling the main power supply to the system. |
| 1.3.6.1.4.1.412.2.4.51.1 | RowdMTFSystemPowerControlsEntry | not-accessible | mandatory | This group defines attributes for controlling the main power supply to the system. |
| 1.3.6.1.4.1.412.2.4.51.1.1 | ColumnpowerControlRequestAtt1 | read-write | mandatory | Reading the value of this attribute gives the value of the last valid power control request that was written into it. Writing a valid value into it causes the … |
| 1.3.6.1.4.1.412.2.4.51.1.2 | ColumntimedPowerOnAvailableAtt2 | read-only | mandatory | Defines whether a timed power-on facility is available. |
| 1.3.6.1.4.1.412.2.4.51.1.3 | ColumntimeToNextScheduledPowerOnAtt3 | read-write | mandatory | The number of seconds until the next timed power-on is scheduled to occur. A value of 0 means that if the system is powered off, no automatic timed poweron wil… |
| 1.3.6.1.4.1.412.2.4.53 | TabledMTFVoltageProbeTable | not-accessible | mandatory | This group defines the attributes for the voltage probes in this system. |
| 1.3.6.1.4.1.412.2.4.53.1 | RowdMTFVoltageProbeEntry | not-accessible | mandatory | This group defines the attributes for the voltage probes in this system. |
| 1.3.6.1.4.1.412.2.4.53.1 | NodedMTFVoltageProbeEvt1 | powerSupplyStatusChange | ||
| 1.3.6.1.4.1.412.2.4.53.1.0 | ColumndMTFVoltageProbeState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.53.1.1 | ColumnvoltageProbeIndexAtt1 | read-only | mandatory | Index into this voltage probe table. |
| 1.3.6.1.4.1.412.2.4.53.1.2 | ColumnvoltageProbeLocationAtt2 | read-only | mandatory | Identifies the physical location of the voltage probe. |
| 1.3.6.1.4.1.412.2.4.53.1.3 | ColumnvoltageProbeDescriptionAtt3 | read-only | mandatory | Additional descriptive information about the voltage probe or probe's location. |
| 1.3.6.1.4.1.412.2.4.53.1.4 | ColumnvoltageStatusAtt4 | read-only | mandatory | Defines the status of the voltage monitored by this voltage probe. |
| 1.3.6.1.4.1.412.2.4.53.1.5 | ColumnvoltageProbeVoltageLevelAtt5 | read-only | mandatory | The current voltage level of this voltage probe in millivolts. 0x8000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.6 | ColumnmonitoredVoltageNominalLevelAtt6 | read-only | mandatory | The nominal voltage level of the voltage monitored by this probe in millivolts. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.7 | ColumnmonitoredVoltageNormalMaximumAtt7 | read-only | mandatory | The normal maximum voltage level of the voltage monitored by this probe in millivolts. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.8 | ColumnmonitoredVoltageNormalMinimumAtt8 | read-only | mandatory | The normal minimum voltage level of the voltage monitored by this probe in millivolts. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.9 | ColumnvoltageProbeMaximumAtt9 | read-only | mandatory | The maximum voltage level specified to be readable by this probe in millivolts. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.10 | ColumnvoltageProbeMinimumAtt10 | read-only | mandatory | The minimum voltage level specified to be readable by this probe in millivolts. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.11 | ColumnvoltageLevelLowerThresholdNonCriticalAtt11 | read-write | mandatory | The lower non-critical threshold for the voltage level set by the user, in millivolts. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.12 | ColumnvoltageLevelUpperThresholdNonCriticalAtt12 | read-write | mandatory | The upper non-critical threshold for the voltage probe, in millivolts. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.13 | ColumnvoltageLevelLowerThresholdCriticalAtt13 | read-write | mandatory | The lower critical threshold for the voltage probe, in millivolt . 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.14 | ColumnvoltageLevelUpperThresholdCriticalAtt14 | read-write | mandatory | The upper critical threshold for the voltage probe, in millivolt . 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.15 | ColumnvoltageLevelLowerThresholdNonRecoverableAtt15 | read-write | mandatory | The lower non-recoverable threshold for the voltage probe, in millivolts. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.16 | ColumnvoltageLevelUpperThresholdNonRecoverableAtt16 | read-write | mandatory | The upper non-recoverable threshold for the voltage probe, in millivolts. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.17 | ColumnvoltageProbeResolutionAtt17 | read-write | mandatory | The resolution for the reading from this voltage probe, in tenths of millivolts. '0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.18 | ColumnvoltageProbeToleranceAtt18 | read-write | mandatory | The tolerance for the reading from this voltage probe, in plus/minus millivolts. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.19 | ColumnvoltageProbeAccuracyAtt19 | read-write | mandatory | The accuracy for the reading from this voltage probe, in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.53.1.20 | ColumnfRUGroupIndexAtt20-2 | read-only | mandatory | Index into the FRU table |
| 1.3.6.1.4.1.412.2.4.53.1.21 | ColumnoperationalGroupIndexAtt21-2 | read-only | mandatory | Index into the Operational State table |
| 1.3.6.1.4.1.412.2.4.53.6 | RowdMTFVoltageProbeEvSys | not-accessible | mandatory | The major functional aspect of the product causing the fault. |
| 1.3.6.1.4.1.412.2.4.53.7 | RowdMTFVoltageProbeEvSub | not-accessible | mandatory | The minor functional aspect of the product causing the fault. |
| 1.3.6.1.4.1.412.2.4.54 | TabledMTFTemperatureProbeTable | not-accessible | mandatory | This group defines the attributes for the temperature probes in this system. |
| 1.3.6.1.4.1.412.2.4.54.1 | RowdMTFTemperatureProbeEntry | not-accessible | mandatory | This group defines the attributes for the temperature probes in this system. |
| 1.3.6.1.4.1.412.2.4.54.1 | NodedMTFTemperatureProbeEvt1 | coolingDeviceStatusChange | ||
| 1.3.6.1.4.1.412.2.4.54.1.0 | ColumndMTFTemperatureProbeState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.54.1.1 | ColumntemperatureProbeTableIndexAtt1 | read-only | mandatory | Index into this temperature probe table. |
| 1.3.6.1.4.1.412.2.4.54.1.2 | ColumntemperatureProbeLocationAtt2 | read-only | mandatory | Identifies the physical location of the temperature probe. |
| 1.3.6.1.4.1.412.2.4.54.1.3 | ColumntemperatureProbeDescriptionAtt3 | read-only | mandatory | Additional descriptive information about the temperature probe or probe's location. |
| 1.3.6.1.4.1.412.2.4.54.1.4 | ColumntemperatureStatusAtt4 | read-only | mandatory | Defines the status of the temperature monitored by this temperat re probe. |
| 1.3.6.1.4.1.412.2.4.54.1.5 | ColumntemperatureProbeTemperatureReadingAtt5 | read-only | mandatory | The present temperature reading of this temperature probe in 1/10th degrees C. 0x8000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.6 | ColumnmonitoredTemperatureNominalReadingAtt6 | read-only | mandatory | The nominal temperature reading of the temperature monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.7 | ColumnmonitoredTemperatureNormalMaximumAtt7 | read-only | mandatory | The normal maximum temperature reading of the temperature monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.8 | ColumnmonitoredTemperatureNormalMinimumAtt8 | read-only | mandatory | The normal minimum temperature reading of the temperature monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.9 | ColumntemperatureProbeMaximumAtt9 | read-only | mandatory | The maximum temperature reading specified to be readable by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.10 | ColumntemperatureProbeMinimumAtt10 | read-only | mandatory | The minimum temperature reading specified to be readable by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.11 | ColumntemperatureReadingLowerThresholdNonCriticalAtt11 | read-write | mandatory | The lower non-critical threshold for the temperature reading set by the user, in 1/10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.12 | ColumntemperatureReadingUpperThresholdNonCriticalAtt12 | read-write | mandatory | The upper non-critical threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.13 | ColumntemperatureReadingLowerThresholdCriticalAtt13 | read-write | mandatory | The lower critical threshold for the temperature probe, in 1/10 degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.14 | ColumntemperatureReadingUpperThresholdCriticalAtt14 | read-write | mandatory | The upper critical threshold for the temperature probe, in /10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.15 | ColumntemperatureReadingLowerThresholdNonRecoverableAtt15 | read-write | mandatory | The lower non-recoverable threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.16 | ColumntemperatureReadingUpperThresholdNonRecoverableAtt16 | read-write | mandatory | The upper non-recoverable threshold for the temperature probe, in 1/10th degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.17 | ColumntemperatureProbeResolutionAtt17 | read-write | mandatory | The resolution for the reading from this temperature probe, in tenths of 1/10th degrees C. '0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.18 | ColumntemperatureProbeToleranceAtt18 | read-write | mandatory | The tolerance for the reading from this temperature probe, in plus/minus 1/10 degrees C. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.54.1.19 | ColumntemperatureProbeAccuracyAtt19 | read-write | mandatory | The accuracy for the reading from this temperature probe, in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown' or'unsupport d'. |
| 1.3.6.1.4.1.412.2.4.54.1.20 | ColumnfRUGroupIndexAtt20-1 | read-only | mandatory | Index into the FRU table. A value of -1 indicates that this device is not an FRU. |
| 1.3.6.1.4.1.412.2.4.54.1.21 | ColumnoperationalGroupIndexAtt21-1 | read-only | mandatory | Index into the Operational State table |
| 1.3.6.1.4.1.412.2.4.54.6 | RowdMTFTemperatureProbeEvSys | not-accessible | mandatory | The major functional aspect of the product causing the fault. |
| 1.3.6.1.4.1.412.2.4.54.7 | RowdMTFTemperatureProbeEvSub | not-accessible | mandatory | The minor functional aspect of the product causing the fault. |
| 1.3.6.1.4.1.412.2.4.55 | TabledMTFElectricalCurrentProbeTable | not-accessible | mandatory | This group defines the attributes for the current probes in this system. |
| 1.3.6.1.4.1.412.2.4.55.1 | RowdMTFElectricalCurrentProbeEntry | not-accessible | mandatory | This group defines the attributes for the current probes in this system. |
| 1.3.6.1.4.1.412.2.4.55.1 | NodedMTFElectricalCurrentProbeEvt1 | powerSupplyStatusChange | ||
| 1.3.6.1.4.1.412.2.4.55.1.0 | ColumndMTFElectricalCurrentProbeState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.55.1.1 | ColumnelectricalCurrentProbeTableIndexAtt1 | read-only | mandatory | Index into this electrical current probe table. |
| 1.3.6.1.4.1.412.2.4.55.1.2 | ColumnelectricalCurrentProbeLocationAtt2 | read-only | mandatory | Identifies the physical location of the electrical current probe. |
| 1.3.6.1.4.1.412.2.4.55.1.3 | ColumnelectricalCurrentProbeDescriptionAtt3 | read-only | mandatory | Additional descriptive information about the electrical current probe or probe's location. |
| 1.3.6.1.4.1.412.2.4.55.1.4 | ColumnelectricalCurrentStatusAtt4 | read-only | mandatory | Defines the status of the electrical current monitored by this electrical current probe. |
| 1.3.6.1.4.1.412.2.4.55.1.5 | ColumnelectricalCurrentProbeReadingAtt5 | read-only | mandatory | The present electrical current reading of this probe in milliamp . 0x8000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.55.1.6 | ColumnmonitoredElectricalCurrentNominalReadingAtt6 | read-only | mandatory | The nominal electrical current reading of the current monitored by this probe in milliamps. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.55.1.7 | ColumnmonitoredElectricalCurrentNormalMaximumAtt7 | read-only | mandatory | The normal maximum electrical current reading of the current monitored by this probe in milliamps. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.55.1.8 | ColumnmonitoredElectricalCurrentNormalMinimumAtt8 | read-only | mandatory | The normal minimum electrical current reading of the current monitored by this probe in milliamps. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.55.1.9 | ColumnelectricalCurrentProbeMaximumAtt9 | read-only | mandatory | The maximum electrical current reading specified to be readable by this probe in milliamps. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.55.1.10 | ColumnelectricalCurrentProbeMinimumAtt10 | read-only | mandatory | The minimum electrical current reading specified to be readable by this probe in milliamps. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.55.1.11 | ColumnelectricalCurrentReadingLowerThresholdNonCriticalAtt11 | read-write | mandatory | The lower non-critical threshold for the electrical current reading set by the user, in milliamps. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.55.1.12 | ColumnelectricalCurrentReadingUpperThresholdNonCriticalAtt12 | read-write | mandatory | The upper non-critical threshold for the electrical current reading, in milliamps. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.55.1.13 | ColumnelectricalCurrentReadingLowerThresholdCriticalAtt13 | read-write | mandatory | The lower critical threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.55.1.14 | ColumncurrentReadingUpperThresholdCriticalAtt14 | read-write | mandatory | The upper critical threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.55.1.15 | ColumnelectricalCurrentReadingLowerThresholdNonRecoverabAtt15 | read-write | mandatory | The lower non-recoverable threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.55.1.16 | ColumnelectricalCurrentReadingUpperThresholdNonRecoverabAtt16 | read-write | mandatory | The upper non-recoverable threshold for the electrical current probe, in milliamps. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.55.1.17 | ColumnelectricalCurrentProbeResolutionAtt17 | read-write | mandatory | The resolution for the reading from this electrical current probe, in tenths of milliamps. '0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.55.1.18 | ColumnelectricalCurrentProbeToleranceAtt18 | read-write | mandatory | The tolerance for the reading from this electrical current probe, in plus/minus milliamps. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.55.1.19 | ColumnelectricalCurrentProbeAccuracyAtt19 | read-write | mandatory | The accuracy for the reading from this electrical current probe, in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown'. |
| 1.3.6.1.4.1.412.2.4.55.1.20 | ColumnfRUGroupIndexAtt20 | read-only | mandatory | Index into the FRU table |
| 1.3.6.1.4.1.412.2.4.55.1.21 | ColumnoperationalGroupIndexAtt21 | read-only | mandatory | Index into the Operational State table |
| 1.3.6.1.4.1.412.2.4.55.2 | NodedMTFElectricalCurrentProbeEvt2 | coolingDeviceStatusChange | ||
| 1.3.6.1.4.1.412.2.4.55.6 | RowdMTFElectricalCurrentProbeEvSys | not-accessible | mandatory | The major functional aspect of the product causing the fault. |
| 1.3.6.1.4.1.412.2.4.55.7 | RowdMTFElectricalCurrentProbeEvSub | not-accessible | mandatory | The minor functional aspect of the product causing the fault. |
| 1.3.6.1.4.1.412.2.4.63 | TabledMTFPhysicalContainerGlobalTableTable | not-accessible | mandatory | This group of attributes describes the fields in a row ofthe Physical Container Global Table. This table lists all of the containers (e.g. chassis, sub-chassis… |
| 1.3.6.1.4.1.412.2.4.63.1 | RowdMTFPhysicalContainerGlobalTableEntry | not-accessible | mandatory | This group of attributes describes the fields in a row ofthe Physical Container Global Table. This table lists all of the containers (e.g. chassis, sub-chassis… |
| 1.3.6.1.4.1.412.2.4.63.1 | NodedMTFPhysicalContainerGlobalTableEvt1 | securitySettingsChange | ||
| 1.3.6.1.4.1.412.2.4.63.1.0 | ColumndMTFPhysicalContainerGlobalTableState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.63.1.1 | ColumncontainerOrChassisTypeAtt1 | read-only | mandatory | The type of container or chassis. |
| 1.3.6.1.4.1.412.2.4.63.1.2 | ColumnassetTagAtt2 | read-write | mandatory | The Container asset tag string. This asset tag string is writeable by the system administrator. |
| 1.3.6.1.4.1.412.2.4.63.1.3 | ColumnchassisLockPresentAtt3 | read-only | mandatory | If true, a chassis lock is present on the Container. |
| 1.3.6.1.4.1.412.2.4.63.1.4 | ColumnbootupStateAtt4 | read-only | mandatory | The current state of this system when it booted. |
| 1.3.6.1.4.1.412.2.4.63.1.5 | ColumnpowerStateAtt5 | read-only | mandatory | The current state of the power supply or battery(s) for this system. |
| 1.3.6.1.4.1.412.2.4.63.1.6 | ColumnthermalStateAtt6 | read-only | mandatory | The current thermal state of this Container. |
| 1.3.6.1.4.1.412.2.4.63.1.7 | ColumnfRUGroupIndexAtt7 | read-only | mandatory | If this is a Field Replaceable Unit or if it is part of another FRU, this provides an index into the FRU table; 'value = -1' indicates that the group is not a … |
| 1.3.6.1.4.1.412.2.4.63.1.8 | ColumnoperationalGroupIndexAtt8 | read-only | mandatory | The index into the Operational State table for this device if applicable. |
| 1.3.6.1.4.1.412.2.4.63.1.9 | ColumncontainerIndexAtt9 | read-only | mandatory | A unique index for the Physical Container in Physical Container Global Table. |
| 1.3.6.1.4.1.412.2.4.63.1.10 | ColumncontainerNameAtt10 | read-write | mandatory | This is any 64-octet long name that the user or system administr tor wishes to give this specific physical container. |
| 1.3.6.1.4.1.412.2.4.63.1.11 | ColumncontainerLocationAtt11 | read-write | mandatory | This attribute is a string name for the location of the containe . This attribute is Read-Write and may be set to any appropriate value by the user. The string… |
| 1.3.6.1.4.1.412.2.4.63.1.12 | ColumncontainerSecurityStatusAtt12 | read-only | mandatory | This attribute describes whether the Container is physically secure or not. This includes the state of the door lock, or the boot devices or the keyboard or mo… |
| 1.3.6.1.4.1.412.2.4.63.2 | NodedMTFPhysicalContainerGlobalTableEvt2 | powerSupplyStatusChange | ||
| 1.3.6.1.4.1.412.2.4.63.3 | NodedMTFPhysicalContainerGlobalTableEvt3 | coolingDeviceStatusChange | ||
| 1.3.6.1.4.1.412.2.4.63.4 | NodedMTFPhysicalContainerGlobalTableEvt4 | physicalDeviceStatusChange | ||
| 1.3.6.1.4.1.412.2.4.63.5 | NodedMTFPhysicalContainerGlobalTableEvt5 | logicalDeviceStatusChange | ||
| 1.3.6.1.4.1.412.2.4.63.6 | RowdMTFPhysicalContainerGlobalTableEvSys | not-accessible | mandatory | The major functional aspect of the product causing the fault. |
| 1.3.6.1.4.1.412.2.4.63.6 | NodedMTFPhysicalContainerGlobalTableEvt6 | containerSecurityBreach | ||
| 1.3.6.1.4.1.412.2.4.63.7 | RowdMTFPhysicalContainerGlobalTableEvSub | not-accessible | mandatory | The minor functional aspect of the product causing the fault. |
| 1.3.6.1.4.1.412.2.4.63.7 | NodedMTFPhysicalContainerGlobalTableEvt7 | configurationError | ||
| 1.3.6.1.4.1.412.2.4.66 | TabledMTFPowerUnitGlobalTableTable | not-accessible | mandatory | This global table describes all of the Power Units in this system component. The unique index of each Power Unit is the key into this table. A Power Unit is co… |
| 1.3.6.1.4.1.412.2.4.66.1 | RowdMTFPowerUnitGlobalTableEntry | not-accessible | mandatory | This global table describes all of the Power Units in this system component. The unique index of each Power Unit is the key into this table. A Power Unit is co… |
| 1.3.6.1.4.1.412.2.4.66.1.0 | ColumndMTFPowerUnitGlobalTableState | read-write | mandatory | |
| 1.3.6.1.4.1.412.2.4.66.1.1 | ColumnpowerUnitIndexAtt1 | read-only | mandatory | The unique index given to each Power Unit being described by this table. This unique index is the key into this table. |
| 1.3.6.1.4.1.412.2.4.66.1.2 | ColumnpowerUnitRedundancyStatusAtt2 | read-only | mandatory | Gives the redundancy status of the Power Unit. 'Fully Redundant means that all of the configured redundancy is still available; 'Degraded Redundancy' means tha… |
| 1.3.6.1.4.1.412.3 | NodedmtfDynOids | |||
| 1.3.6.1.4.1.412.3.386845712 | NodedmiDynOid386845712 | |||
| 1.3.6.1.4.1.412.3.386845712.73111109 | NodedmiDynOid73111109 | |||
| 1.3.6.1.4.1.412.3.386845712.73111109.3922453424 | NodedmiDynOid3922453424 | |||
| 1.3.6.1.4.1.412.3.386845712.73111109.3922453424.1737102472 | TableiNTELMIFTOMIBTable | not-accessible | mandatory | This group maps the DMI attributes to SNMP. |
| 1.3.6.1.4.1.412.3.386845712.73111109.3922453424.1737102472.1 | RowiNTELMIFTOMIBEntry | not-accessible | mandatory | This group maps the DMI attributes to SNMP. |
| 1.3.6.1.4.1.412.3.386845712.73111109.3922453424.1737102472.1.1 | ColumndellBaseBoardMIBAtt1 | read-only | mandatory | The MIB name that defines this MIF |
| 1.3.6.1.4.1.412.3.386845712.73111109.3922453424.1737102472.1.2 | ColumnmIBOIDAtt2 | read-only | mandatory | The MIB OID that corresponds to this MIF |
| 1.3.6.1.4.1.412.3.386845712.73111109.3922453424.1737102472.1.3 | ColumndisableTrapsAtt3 | read-only | mandatory | Setting this value to 1 disables trap generation. |
| 1.3.6.1.4.1.674 | Nodedell | |||
| 1.3.6.1.4.1.674.10891 | Nodeserver2 | |||
| 1.3.6.1.4.1.674.10891.300 | TabledellTemperatureProbeTable | not-accessible | mandatory | This group defines the attributes for the temperature probes this system. |
| 1.3.6.1.4.1.674.10891.300.1 | RowdellTemperatureProbeEntry | not-accessible | mandatory | This group defines the attributes for the temperature probes this system. |
| 1.3.6.1.4.1.674.10891.300.1 | NodedellTemperatureProbeEvt1 | coolingDeviceStatusChange | ||
| 1.3.6.1.4.1.674.10891.300.1.0 | ColumndellTemperatureProbeState | read-write | mandatory | |
| 1.3.6.1.4.1.674.10891.300.1.1 | ColumntempParentIndexAtt1 | read-only | mandatory | An index into the chassis table. |
| 1.3.6.1.4.1.674.10891.300.1.2 | ColumntempIndexAtt2 | read-only | mandatory | index into this temperature probe table. |
| 1.3.6.1.4.1.674.10891.300.1.3 | ColumntempTypeAtt3 | read-only | mandatory | Defines the type of the temperature probe. |
| 1.3.6.1.4.1.674.10891.300.1.4 | ColumntempStatusAtt4 | read-only | mandatory | Current status of the temperature probe. |
| 1.3.6.1.4.1.674.10891.300.1.5 | ColumntempReadingAtt5 | read-only | mandatory | The reading of the temperature probe in tenths of degrees. |
| 1.3.6.1.4.1.674.10891.300.1.6 | ColumntempMinWarnAtt6 | read-write | mandatory | The lower warning threshold for the temperature probe set by the user. |
| 1.3.6.1.4.1.674.10891.300.1.7 | ColumntempMaxWarnAtt7 | read-write | mandatory | The upper warning threshold for the temperature probe set by the user. |
| 1.3.6.1.4.1.674.10891.300.1.8 | ColumntempMinFailAtt8 | read-only | mandatory | The lower failure threshold for the temperature probe. |
| 1.3.6.1.4.1.674.10891.300.1.9 | ColumntempMaxFailAtt9 | read-only | mandatory | The upper failure threshold for the temperature probe. |
| 1.3.6.1.4.1.674.10891.300.1.10 | ColumntempLocationAtt10 | read-only | mandatory | The location of this temperature probe within the system. |
| 1.3.6.1.4.1.674.10891.300.6 | RowdellTemperatureProbeEvSys | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.300.7 | RowdellTemperatureProbeEvSub | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.300.8 | RowdellTemperatureProbeEvSol | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.301 | TabledellFanSensorTable | not-accessible | mandatory | This group defines the attributes for the fan probes this system. |
| 1.3.6.1.4.1.674.10891.301.1 | RowdellFanSensorEntry | not-accessible | mandatory | This group defines the attributes for the fan probes this system. |
| 1.3.6.1.4.1.674.10891.301.1 | NodedellFanSensorEvt1 | coolingDeviceStatusChange | ||
| 1.3.6.1.4.1.674.10891.301.1.0 | ColumndellFanSensorState | read-write | mandatory | |
| 1.3.6.1.4.1.674.10891.301.1.1 | ColumnfansParentIndexAtt1 | read-only | mandatory | An index into the chassis table. |
| 1.3.6.1.4.1.674.10891.301.1.2 | ColumnfansIndexAtt2 | read-only | mandatory | index into this fan probe table. |
| 1.3.6.1.4.1.674.10891.301.1.3 | ColumnfansTypeAtt3 | read-only | mandatory | Defines the type of the fan probe. |
| 1.3.6.1.4.1.674.10891.301.1.4 | ColumnfansStatusAtt4 | read-only | mandatory | Current status of the fan probe. |
| 1.3.6.1.4.1.674.10891.301.1.5 | ColumnfansReadingAtt5 | read-only | mandatory | The reading of the fan probe in RPM (or boolean). |
| 1.3.6.1.4.1.674.10891.301.1.6 | ColumnfansWarningMinAtt6 | read-write | mandatory | The lower warning threshold for the fan probe set by the user. |
| 1.3.6.1.4.1.674.10891.301.1.7 | ColumnfansMaxWarnAtt7 | read-write | mandatory | The upper warning threshold for the fan probe set by the user. |
| 1.3.6.1.4.1.674.10891.301.1.8 | ColumnfansMinFailAtt8 | read-only | mandatory | The lower failure threshold for the fan probe. |
| 1.3.6.1.4.1.674.10891.301.1.9 | ColumnfansMaxFailAtt9 | read-only | mandatory | The upper failure threshold for the fan probe. |
| 1.3.6.1.4.1.674.10891.301.1.10 | ColumnfansLocationAtt10 | read-only | mandatory | The location of this fan probe within the system. |
| 1.3.6.1.4.1.674.10891.301.6 | RowdellFanSensorEvSys | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.301.7 | RowdellFanSensorEvSub | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.301.8 | RowdellFanSensorEvSol | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.302 | TabledellVoltageProbeTable | not-accessible | mandatory | The Voltage group contains the data on all the voltage probes in a system. |
| 1.3.6.1.4.1.674.10891.302.1 | RowdellVoltageProbeEntry | not-accessible | mandatory | The Voltage group contains the data on all the voltage probes in a system. |
| 1.3.6.1.4.1.674.10891.302.1 | NodedellVoltageProbeEvt1 | powerSupplyStatusChange | ||
| 1.3.6.1.4.1.674.10891.302.1.0 | ColumndellVoltageProbeState | read-write | mandatory | |
| 1.3.6.1.4.1.674.10891.302.1.1 | ColumnvoltParentIndexAtt1 | read-only | mandatory | The chassis this voltage probe is connected to. |
| 1.3.6.1.4.1.674.10891.302.1.2 | ColumnvoltIndexAtt2 | read-only | mandatory | the index of the voltage probe within the chassis. |
| 1.3.6.1.4.1.674.10891.302.1.3 | ColumnvoltTypeAtt3 | read-only | mandatory | The type of voltage probe |
| 1.3.6.1.4.1.674.10891.302.1.4 | ColumnvoltStatusAtt4 | read-only | mandatory | Status of the voltage probe. |
| 1.3.6.1.4.1.674.10891.302.1.5 | ColumnvoltReadingAtt5 | read-only | mandatory | Current reading of the voltage probe, in millivolts. |
| 1.3.6.1.4.1.674.10891.302.1.6 | ColumnvoltMinWarnAtt6 | read-write | mandatory | lower warning threshold value for this voltage probe. |
| 1.3.6.1.4.1.674.10891.302.1.7 | ColumnvoltMaxWarnAtt7 | read-write | mandatory | upper warning threshold value for this voltage probe. |
| 1.3.6.1.4.1.674.10891.302.1.8 | ColumnvoltMinFailAtt8 | read-only | mandatory | lower failure threshold value for this voltage probe. |
| 1.3.6.1.4.1.674.10891.302.1.9 | ColumnvoltMaxFailAtt9 | read-only | mandatory | upper failure threshold value for this voltage probe. |
| 1.3.6.1.4.1.674.10891.302.1.10 | ColumnvoltLocationAtt10 | read-only | mandatory | the location of this voltage probe within the system. |
| 1.3.6.1.4.1.674.10891.302.6 | RowdellVoltageProbeEvSys | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.302.7 | RowdellVoltageProbeEvSub | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.302.8 | RowdellVoltageProbeEvSol | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.303 | TabledellCurrentProbeTable | not-accessible | mandatory | The Current group contains the data on all the Current probes in a system. |
| 1.3.6.1.4.1.674.10891.303.1 | RowdellCurrentProbeEntry | not-accessible | mandatory | The Current group contains the data on all the Current probes in a system. |
| 1.3.6.1.4.1.674.10891.303.1 | NodedellCurrentProbeEvt1 | powerSupplyStatusChange | ||
| 1.3.6.1.4.1.674.10891.303.1.0 | ColumndellCurrentProbeState | read-write | mandatory | |
| 1.3.6.1.4.1.674.10891.303.1.1 | ColumnampParentIndexAtt1 | read-only | mandatory | The chassis this current probe is connected to. |
| 1.3.6.1.4.1.674.10891.303.1.2 | ColumnampIndexAtt2 | read-only | mandatory | the index of the current probe within the chassis. |
| 1.3.6.1.4.1.674.10891.303.1.3 | ColumnampTypeAtt3 | read-only | mandatory | The type of current probe |
| 1.3.6.1.4.1.674.10891.303.1.4 | ColumnampStatusAtt4 | read-only | mandatory | Status of the current probe. |
| 1.3.6.1.4.1.674.10891.303.1.5 | ColumnampReadingAtt5 | read-only | mandatory | Current reading of the current probe in milliamps. |
| 1.3.6.1.4.1.674.10891.303.1.6 | ColumnampMinWarnAtt6 | read-write | mandatory | lower warning threshold value for this current probe. |
| 1.3.6.1.4.1.674.10891.303.1.7 | ColumnampMaxWarnAtt7 | read-write | mandatory | upper warning threshold value for this current probe. |
| 1.3.6.1.4.1.674.10891.303.1.8 | ColumnampMinFailAtt8 | read-only | mandatory | lower failure threshold value for this current probe. |
| 1.3.6.1.4.1.674.10891.303.1.9 | ColumnampMaxFailAtt9 | read-only | mandatory | upper failure threshold value for this current probe. |
| 1.3.6.1.4.1.674.10891.303.1.10 | ColumnampLocationAtt10 | read-only | mandatory | the location of this current probe within the system. |
| 1.3.6.1.4.1.674.10891.303.6 | RowdellCurrentProbeEvSys | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.303.7 | RowdellCurrentProbeEvSub | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.303.8 | RowdellCurrentProbeEvSol | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.304 | TabledellRedundantPowerSupplyTable | not-accessible | mandatory | The Power Supply group contains the data on all the redundant power supplies in a system. |
| 1.3.6.1.4.1.674.10891.304.1 | RowdellRedundantPowerSupplyEntry | not-accessible | mandatory | The Power Supply group contains the data on all the redundant power supplies in a system. |
| 1.3.6.1.4.1.674.10891.304.1.0 | ColumndellRedundantPowerSupplyState | read-write | mandatory | |
| 1.3.6.1.4.1.674.10891.304.1.1 | ColumnpwrSupplyParentIndexAtt1 | read-only | mandatory | The chassis this power supply is connected to. |
| 1.3.6.1.4.1.674.10891.304.1.2 | ColumnpwrSupplyIndexAtt2 | read-only | mandatory | The index within the chassis of this power supply. |
| 1.3.6.1.4.1.674.10891.304.1.3 | ColumnpwrSupplyTypeAtt3 | read-only | mandatory | The type of power supply. |
| 1.3.6.1.4.1.674.10891.304.1.4 | ColumnpwrSupplyStatusAtt4 | read-only | mandatory | The current status of this power supply. |
| 1.3.6.1.4.1.674.10891.304.1.5 | ColumnpwrSupplyOnlineAtt5 | read-write | mandatory | The current online status of this power supply. Setting this value to FALSE will turn off the power supply, setting it to TRUE will turn on the power supply. |
| 1.3.6.1.4.1.674.10891.304.1.6 | ColumnpwrLocationAtt6 | read-only | mandatory | the location of this power supply within the system. |
| 1.3.6.1.4.1.674.10891.305 | TabledellGlobalPowerUnitTable | not-accessible | mandatory | This group contains the global status for the power supplies in the system. |
| 1.3.6.1.4.1.674.10891.305.1 | RowdellGlobalPowerUnitEntry | not-accessible | mandatory | This group contains the global status for the power supplies in the system. |
| 1.3.6.1.4.1.674.10891.305.1 | NodedellGlobalPowerUnitEvt1 | powerSupplyRedundancyChange | ||
| 1.3.6.1.4.1.674.10891.305.1.0 | ColumndellGlobalPowerUnitState | read-write | mandatory | |
| 1.3.6.1.4.1.674.10891.305.1.1 | ColumnpwrUnitStatusAtt1 | read-only | mandatory | The current redundancy status of the power unit. |
| 1.3.6.1.4.1.674.10891.305.1.2 | ColumnpwrUnitGlobalLevelAtt2 | read-only | mandatory | The current global power level usage, in percent. |
| 1.3.6.1.4.1.674.10891.305.1.3 | ColumnpwrUnitGlobalMaxWarnAtt3 | read-write | mandatory | Warning threshold, in percent |
| 1.3.6.1.4.1.674.10891.305.1.4 | ColumnpwrUnitLevel33vAtt4 | read-only | mandatory | The current 3.3v power level usage, in percent. |
| 1.3.6.1.4.1.674.10891.305.1.5 | ColumnpwrUnitMaxWarn33vAtt5 | read-write | mandatory | Warning threshold, in percent |
| 1.3.6.1.4.1.674.10891.305.1.6 | ColumnpwrUnitLevel5vAtt6 | read-only | mandatory | The current 5v power level usage, in percent. |
| 1.3.6.1.4.1.674.10891.305.1.7 | ColumnpwrUnitMaxWarn5vAtt7 | read-write | mandatory | Warning threshold, in percent |
| 1.3.6.1.4.1.674.10891.305.1.8 | ColumnpwrUnitLevel12vAtt8 | read-only | mandatory | The current 12v power level usage, in percent. |
| 1.3.6.1.4.1.674.10891.305.1.9 | ColumnpwrUnitMaxWarn12vAtt9 | read-write | mandatory | Warning threshold, in percent |
| 1.3.6.1.4.1.674.10891.305.1.10 | ColumnpwrUnitUidAtt10 | read-only | mandatory | The unique ID for this power supply unit. |
| 1.3.6.1.4.1.674.10891.305.1.11 | ColumnpwrUnitIndexAtt11 | read-only | mandatory | The index into the power supply unit table. |
| 1.3.6.1.4.1.674.10891.305.2 | NodedellGlobalPowerUnitEvt2 | powerSupplyStatusChange | ||
| 1.3.6.1.4.1.674.10891.305.6 | RowdellGlobalPowerUnitEvSys | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.305.7 | RowdellGlobalPowerUnitEvSub | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.305.8 | RowdellGlobalPowerUnitEvSol | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.306 | TabledellSystemChassisExtensionTable | not-accessible | mandatory | Global status of devices in chassis. |
| 1.3.6.1.4.1.674.10891.306.1 | RowdellSystemChassisExtensionEntry | not-accessible | mandatory | Global status of devices in chassis. |
| 1.3.6.1.4.1.674.10891.306.1 | NodedellSystemChassisExtensionEvt1 | memoryECCError | ||
| 1.3.6.1.4.1.674.10891.306.1.0 | ColumndellSystemChassisExtensionState | read-write | mandatory | |
| 1.3.6.1.4.1.674.10891.306.1.1 | ColumnchassIndexAtt1 | read-only | mandatory | Physical container index |
| 1.3.6.1.4.1.674.10891.306.1.2 | ColumnchassGlobStatusAtt2 | read-only | mandatory | Global status of all devices in chassis. |
| 1.3.6.1.4.1.674.10891.306.1.3 | ColumnchassTempStatusAtt3 | read-only | mandatory | Global status of temperature probes. |
| 1.3.6.1.4.1.674.10891.306.1.4 | ColumnchassTempProbesAtt4 | read-only | mandatory | This contains the statuses of all temp probes in the system, one probe per octet. The value of each octet is the value of the status field. |
| 1.3.6.1.4.1.674.10891.306.1.5 | ColumnchassFansStatusAtt5 | read-only | mandatory | Global status of fan sensors. |
| 1.3.6.1.4.1.674.10891.306.1.6 | ColumnchassFansProbesAtt6 | read-only | mandatory | This contains the statuses of all fan probes in the system, one probe per octet. The value of each octet is the value of the status field. |
| 1.3.6.1.4.1.674.10891.306.1.7 | ColumnchassVoltStatusAtt7 | read-only | mandatory | Global status of voltage probes. |
| 1.3.6.1.4.1.674.10891.306.1.8 | ColumnchassVoltProbesAtt8 | read-only | mandatory | This contains the statuses of all volt probes in the system, one probe per octet. The value of each octet is the value of the status field. |
| 1.3.6.1.4.1.674.10891.306.1.9 | ColumnchassAmpStatusAtt9 | read-only | mandatory | Global status of current probes. |
| 1.3.6.1.4.1.674.10891.306.1.10 | ColumnchassAmpProbesAtt10 | read-only | mandatory | This contains the statuses of all amp probes in the system, one probe per octet. The value of each octet is the value of the status field. |
| 1.3.6.1.4.1.674.10891.306.1.11 | ColumnchassPsStatusAtt11 | read-only | mandatory | Global status of power supplies. |
| 1.3.6.1.4.1.674.10891.306.1.12 | ColumnchassPwrSuppliesAtt12 | read-only | mandatory | This contains the statuses of all power supplies in the system, one probe per octet. The value of each octet is the value of the status field. |
| 1.3.6.1.4.1.674.10891.306.1.13 | ColumnchassServiceTagAtt13 | read-only | mandatory | This is the service tag for this chassis, if it exists. |
| 1.3.6.1.4.1.674.10891.306.1.14 | ColumnchassUidAtt14 | read-only | mandatory | This is the Unique ID for this chassis, if it exists. |
| 1.3.6.1.4.1.674.10891.306.1.15 | ColumnchassBackPlaneUidAtt15 | read-only | mandatory | This is the Unique ID for the backplane in this chassis. |
| 1.3.6.1.4.1.674.10891.306.1.16 | ColumnchassIdentifyAtt16 | read-write | mandatory | This attribute is used to visually identify a disk pod or other chassis by causing its lights to flash. Setting this value to non-zero turns on the identify, s… |
| 1.3.6.1.4.1.674.10891.306.1.17 | ColumnchassFanControlAtt17 | read-write | mandatory | This attribute is used to control the fan speed in a chassis. If the value is 0, then fan control is notavailable. A value of 2 indicates maximum cooling. Aval… |
| 1.3.6.1.4.1.674.10891.306.1.18 | ColumnchassLEDConfigAtt18 | read-write | mandatory | This attribute is used to configure which fault conditionscause the fault LED to flash. If the value is 0, thenthis feature is not available. A value of 16 ind… |
| 1.3.6.1.4.1.674.10891.306.1.19 | ColumnchassFaultClearAtt19 | read-write | mandatory | This attribute is used to clear the hard drive fault LED.If this value is non-zero, then it is available. Writingany value to this attribut will clear the hard… |
| 1.3.6.1.4.1.674.10891.306.1.20 | ColumnchassThermalShutdownAtt20 | read-write | mandatory | This attribute is used to enable thermal shutdown of a chassis. If the value is -1, then thermal shutdown is notenabled. A value of 5 will shutdown on failures… |
| 1.3.6.1.4.1.674.10891.306.1.21 | ColumnchassMemStatusAtt21 | read-only | mandatory | Global status of Memory Devices. |
| 1.3.6.1.4.1.674.10891.306.1.22 | ColumnchassMemDevicesAtt22 | read-only | mandatory | This contains the statuses of all memory devices in the system, one device per octet. The value of each octet is the value of the status field. |
| 1.3.6.1.4.1.674.10891.306.6 | RowdellSystemChassisExtensionEvSys | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.306.7 | RowdellSystemChassisExtensionEvSub | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.306.8 | RowdellSystemChassisExtensionEvSol | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.307 | TabledellEsmLogTable | not-accessible | mandatory | ESM Event Log. |
| 1.3.6.1.4.1.674.10891.307.1 | RowdellEsmLogEntry | not-accessible | mandatory | ESM Event Log. |
| 1.3.6.1.4.1.674.10891.307.1.0 | ColumndellEsmLogState | read-write | mandatory | |
| 1.3.6.1.4.1.674.10891.307.1.1 | ColumnesmLogIndexAtt1 | read-only | mandatory | KEY: The index to this log. |
| 1.3.6.1.4.1.674.10891.307.1.2 | ColumnesmLogDataAtt2 | read-write | mandatory | The event log data for the ESM. |
| 1.3.6.1.4.1.674.10891.308 | TabledellPOSTLogTable | not-accessible | mandatory | POST Codes Event Log. |
| 1.3.6.1.4.1.674.10891.308.1 | RowdellPOSTLogEntry | not-accessible | mandatory | POST Codes Event Log. |
| 1.3.6.1.4.1.674.10891.308.1.0 | ColumndellPOSTLogState | read-write | mandatory | |
| 1.3.6.1.4.1.674.10891.308.1.1 | ColumnpostLogIndexAtt1 | read-only | mandatory | KEY: The index into the post log. |
| 1.3.6.1.4.1.674.10891.308.1.2 | ColumnpostLogDataAtt2 | read-only | mandatory | The event log data. |
| 1.3.6.1.4.1.674.10891.309 | TabledellSecurityTable | not-accessible | mandatory | Security Group - contains user database: Used by both DSA and Baseboard components. |
| 1.3.6.1.4.1.674.10891.309.1 | RowdellSecurityEntry | not-accessible | mandatory | Security Group - contains user database: Used by both DSA and Baseboard components. |
| 1.3.6.1.4.1.674.10891.309.1.0 | ColumndellSecurityState | read-write | mandatory | |
| 1.3.6.1.4.1.674.10891.309.1.1 | ColumnuserIndexAtt1 | read-only | mandatory | Keyed ID for this group. |
| 1.3.6.1.4.1.674.10891.309.1.2 | ColumnuserNameAtt2 | read-only | mandatory | User name. First user name is 'create', allows creation. |
| 1.3.6.1.4.1.674.10891.309.1.3 | ColumnuserControlAtt3 | read-write | mandatory | User control. Used for creating/deleting/editing users. |
| 1.3.6.1.4.1.674.10891.309.1.4 | ColumnrequestAtt4 | read-write | mandatory | Request field used for sets. |
| 1.3.6.1.4.1.674.10891.310 | TabledellDialupTable | not-accessible | mandatory | Dialup Control - contains information used by the ESM dialup interface. |
| 1.3.6.1.4.1.674.10891.310.1 | RowdellDialupEntry | not-accessible | mandatory | Dialup Control - contains information used by the ESM dialup interface. |
| 1.3.6.1.4.1.674.10891.310.1.1 | ColumndialupCapabilityAtt1 | read-only | mandatory | Specifies if this system supports dialup. |
| 1.3.6.1.4.1.674.10891.310.1.2 | ColumncallbackNumberAtt2 | read-write | mandatory | The number to callback when a dialup connection is established. |
| 1.3.6.1.4.1.674.10891.311 | TabledellFirmwareTable | not-accessible | mandatory | Firmware Information - Contains version/status of firmware. |
| 1.3.6.1.4.1.674.10891.311.1 | RowdellFirmwareEntry | not-accessible | mandatory | Firmware Information - Contains version/status of firmware. |
| 1.3.6.1.4.1.674.10891.311.1.0 | ColumndellFirmwareState | read-write | mandatory | |
| 1.3.6.1.4.1.674.10891.311.1.1 | ColumnfirmwareChassisIndexAtt1 | read-only | mandatory | Firmware chassis index |
| 1.3.6.1.4.1.674.10891.311.1.2 | ColumnfirmwareIndexAtt2 | read-only | mandatory | Index into the firmware information table |
| 1.3.6.1.4.1.674.10891.311.1.3 | ColumnfirmwareTypeAtt3 | read-write | mandatory | The type of this firmware. |
| 1.3.6.1.4.1.674.10891.311.1.4 | ColumnfirmwareVersionAtt4 | read-only | mandatory | Version level of this firmware |
| 1.3.6.1.4.1.674.10891.311.1.5 | ColumnfirmwareStatusAtt5 | read-only | mandatory | Current status of this firmware, if applicable |
| 1.3.6.1.4.1.674.10891.312 | TabledellSystemResetTable | not-accessible | mandatory | This group defines whether System Control functions are availabl and enabled. |
| 1.3.6.1.4.1.674.10891.312.1 | RowdellSystemResetEntry | not-accessible | mandatory | This group defines whether System Control functions are availabl and enabled. |
| 1.3.6.1.4.1.674.10891.312.1 | NodedellSystemResetEvt1 | systemUp | ||
| 1.3.6.1.4.1.674.10891.312.1.1 | ColumnautomaticCapabilitiesAtt1 | read-only | mandatory | Indicates which Automatic Capabilities are available for the current operating system. Encoding is as follows: 0x1 = Supports Reboot 0x2 = Supports Power Cycle… |
| 1.3.6.1.4.1.674.10891.312.1.2 | ColumnautomaticSettingsAtt2 | read-write | mandatory | Indicates which Automatic Settings are enabled by the user. Encoding is as follows: 0x1 = Enabled w/ Reboot 0x2 = Enabled w/ Power Cycle 0x4 = Enabled w/ Notif… |
| 1.3.6.1.4.1.674.10891.312.1.3 | ColumnnotificationNumberAtt3 | read-write | mandatory | The number to dial when the watchdog timer elapses. |
| 1.3.6.1.4.1.674.10891.312.1.4 | ColumnmanualCapabilitiesAtt4 | read-only | mandatory | Describes which system reset actions may occur.Bit encodings: 0x1 = Reboot 0x2 = Power Off 0x4 = Power Cycle 0x8 = Shutdown OS |
| 1.3.6.1.4.1.674.10891.312.1.5 | ColumnmanualControlAtt5 | read-write | mandatory | Setting this value will immediately perform one of the following functions. Encoding as follows: Bit encoding: 0x1 = Reboot 0x2 = Power Off 0x4 = Power Cycle 0… |
| 1.3.6.1.4.1.674.10891.312.1.6 | ColumnautomaticSystemResetTimerAtt6 | read-write | mandatory | Automatic System Reset Timer in seconds. Minimum value is 20 seconds. |
| 1.3.6.1.4.1.674.10891.312.6 | RowdellSystemResetEvSys | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.312.7 | RowdellSystemResetEvSub | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.312.8 | RowdellSystemResetEvSol | not-accessible | mandatory | |
| 1.3.6.1.4.1.674.10891.400 | TabledELLSystemsManagementSoftwareTable | not-accessible | mandatory | This group defines the attributes of the management software which instruments this component. |
| 1.3.6.1.4.1.674.10891.400.1 | RowdELLSystemsManagementSoftwareEntry | not-accessible | mandatory | This group defines the attributes of the management software which instruments this component. |
| 1.3.6.1.4.1.674.10891.400.1.1 | ColumnproductAtt1 | read-only | mandatory | The name of the Systems Management Software product that instruments this component. |
| 1.3.6.1.4.1.674.10891.400.1.2 | ColumnversionAtt2 | read-only | mandatory | The version for the Systems Management Software. |
| 1.3.6.1.4.1.674.10891.400.1.3 | ColumnbuildNumberAtt3 | read-only | mandatory | The build number of this Systems Management Software product. |
| 1.3.6.1.4.1.674.10891.400.1.4 | ColumndescriptionAtt4 | read-only | mandatory | A description of this Systems Management Software product. |
| 1.3.6.1.4.1.674.10891.400.1.5 | ColumnsupportedProtocolsAtt5 | read-only | mandatory | This is a bit map field which is used to list protocols which can be used to access the systems management information. This is a bit map where a value of 1 in… |
| 1.3.6.1.4.1.674.10891.400.1.6 | ColumnpreferredProtocolAtt6 | read-only | mandatory | This is a field which is used to indicate which protocol is the preferred method for gathering management information. This is value is set by the instrumentat… |
| 1.3.6.1.4.1.674.10891.400.1.7 | ColumndMIRPCTypesAtt7 | read-only | mandatory | This field describes the RPC type, if any, for instance DCE:ncac -ip-tcp or ONC:tcpip. A semi-colon may seperate multiple supports, such as DCE:ncasn-ip-tcp;ON… |
| 1.3.6.1.4.1.674.10891.402 | TabledELLSystemsSummaryInformationTable | not-accessible | mandatory | This group provides minimal summarization information about a system. |
| 1.3.6.1.4.1.674.10891.402.1 | RowdELLSystemsSummaryInformationEntry | not-accessible | mandatory | This group provides minimal summarization information about a system. |
| 1.3.6.1.4.1.674.10891.402.1.1 | ColumnoperatingSystemAtt1 | read-only | mandatory | This is the operating system which is installed and running on the system. |
| 1.3.6.1.4.1.674.10891.402.1.2 | ColumnsystemClassAtt2 | read-only | mandatory | This is the system type which is installed and running the instrumentation. |
| 1.3.6.1.4.1.674.10891.403 | TabledellMemoryPrefailureTable | not-accessible | mandatory | This group provides information about a memory prefailure condition described in the operational state of the memory device. |
| 1.3.6.1.4.1.674.10891.403.1 | RowdellMemoryPrefailureEntry | not-accessible | mandatory | This group provides information about a memory prefailure condition described in the operational state of the memory device. |
| 1.3.6.1.4.1.674.10891.403.1.0 | ColumndellMemoryPrefailureState | read-write | mandatory | |
| 1.3.6.1.4.1.674.10891.403.1.1 | ColumnmemoryDeviceIndexAtt1 | read-only | mandatory | This is the index into the memory device table. |
| 1.3.6.1.4.1.674.10891.403.1.2 | ColumnresetMemoryDeviceErrorCountAndPrefailureStatusAtt2 | read-write | mandatory | Writing a non-zero value to this field will reset the memory device prefailure status and error count. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DmiCompId | INTEGER | ||
| DmiGroupId | INTEGER | ||
| DmiInteger | INTEGER | ||
| DmiOctetstring | OCTET STRING |