BCSSIMULCRYPTSCS-MIB
55 objects
The Simulcrypt SCS MIB module for Motorola BCS products.
Imported Objects
| BCS-IDENT-MIB | bcs |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1166.7.7 | IdentitybcsSimulcryptScs | The Simulcrypt SCS MIB module for Motorola BCS products. | ||
| 1.3.6.1.4.1.1166.7.7.1 | NodebcsSimScsConfig | |||
| 1.3.6.1.4.1.1166.7.7.1.1 | NodebcsSimScsConfigGeneral | |||
| 1.3.6.1.4.1.1166.7.7.1.1.1 | ScalarbcsSimScsNetworkId | read-write | current | This parameter specifies the network ID used for this Simulcrypt system. The network ID is a Simulcrypt system parameter, please see Simulcrypt system specific… |
| 1.3.6.1.4.1.1166.7.7.1.1.2 | ScalarbcsSimScsMaxNetworkDelay | read-write | current | Worst case propagation delay, in milliseconds, introduced by network topology. Will be factored into negotiations of the actual Simulcrypt crypto-period. SEM N… |
| 1.3.6.1.4.1.1166.7.7.1.1.3 | ScalarbcsSimScsNominalCryptoPeriod | read-write | current | This value specifies the nominal crypto-period in seconds. This value is used as a target for this device during crypto- period negotiations. The actual negoti… |
| 1.3.6.1.4.1.1166.7.7.1.1.4 | ScalarbcsSimScsAccessCriteriaSource | read-write | current | This value specifies which vendor will provide the access criteria information. SEM Note: Once written, a save must be performed via the semSaveConfig paramete… |
| 1.3.6.1.4.1.1166.7.7.1.1.5 | ScalarbcsSimScsEcmgTimeout | read-write | current | This parameter specifies how long the SCS should wait for a response from the ECMG. This value is specified in seconds. SEM Note: Once written, a save must be … |
| 1.3.6.1.4.1.1166.7.7.1.1.6 | ScalarbcsSimScsEcmIdInitial | read-write | current | Each ECM ID and Super CAS ID combination in the Simulcrypt system must be globally unique. To simplify configuration, each SCS is given a starting ECM ID to as… |
| 1.3.6.1.4.1.1166.7.7.1.1.7 | ScalarbcsSimScsEcmChannelTestPeriodicity | read-write | current | Periodicity for the channel test procedure.Default set to 20sec. @Range(min=1, max=3600) @Config(config=yes, reboot=no) @Save(semSaveConfig, value=2, default=y… |
| 1.3.6.1.4.1.1166.7.7.1.1.8 | ScalarbcsSimScsEcmNetworkDelay | read-write | current | The network delay value to account for delays while waiting on an ECM response.Default set to 500msec. @Range(min=0, max=30000) @Config(config=yes, reboot=no) … |
| 1.3.6.1.4.1.1166.7.7.1.1.9 | ScalarbcsSimScsEcmReplyTimeout | read-write | current | Time to wait before timing out while waiting on a response to a channel/stream management message (i.e.: channel_setup, channel_test, stream_setup).Default set… |
| 1.3.6.1.4.1.1166.7.7.1.2 | TablebcsSimScsEcmgConnectionTable | not-accessible | current | This table persists the Simulcrypt SCS to ECMG connections or channels. The device will send Simulcrypt control words to a maximum of bcsSimScsMaxEcmg. |
| 1.3.6.1.4.1.1166.7.7.1.2.1 | RowbcsSimScsEcmgConnectionEntry | not-accessible | current | A single entry in the bcsSimScsEcmgConnectionTable table. |
| 1.3.6.1.4.1.1166.7.7.1.2.1.1 | ColumnbcsSimScsEcmgConnectIndex | not-accessible | current | The Simulcrypt ECMG Connection table index. |
| 1.3.6.1.4.1.1166.7.7.1.2.1.2 | ColumnbcsSimScsEcmgConnectEnabled | read-write | current | Each row in the bcsSimScsEcmgConnectionTable represents a potential SCS<=>ECMG connection that will be attempted during simulcrypt SCS initialization. This set… |
| 1.3.6.1.4.1.1166.7.7.1.2.1.3 | ColumnbcsSimScsEcmgConnectSuperCasId | read-write | current | The Super CAS ID of the ECMG that will be connected to by the Simulcrypt SCS. The Super CAS ID is the 32 bit concatenation of the CAS ID and the Sub CAS ID. Th… |
| 1.3.6.1.4.1.1166.7.7.1.2.1.4 | ColumnbcsSimScsEcmgConnectIpAddr | read-write | current | The IP address that the ECMG is listening on. Used to open a socket between the SCS and the ECMG. SEM Note: Once written, a save must be performed via the semS… |
| 1.3.6.1.4.1.1166.7.7.1.2.1.5 | ColumnbcsSimScsEcmgConnectPort | read-write | current | The remote port that the ECMG is listening on. Used to open a socket between the SCS and the ECMG. SEM Note: Once written, a save must be performed via the sem… |
| 1.3.6.1.4.1.1166.7.7.1.3 | TablebcsSimScsEcmgRedundancyConfigTable | not-accessible | current | This table configures parameters associated with the ECMG redudancy feature. @Commit(param=bcsSimScsEcmgRedundancyConfigApplyChange, value=2) @Save(semSaveConf… |
| 1.3.6.1.4.1.1166.7.7.1.3.1 | RowbcsSimScsEcmgRedundancyConfigEntry | not-accessible | current | A single entry in bcsSimScsEcmgRedundancyConfigTable. |
| 1.3.6.1.4.1.1166.7.7.1.3.1.1 | ColumnbcsSimScsEcmgRedundancyConfigIndex | not-accessible | current | Index into the table. |
| 1.3.6.1.4.1.1166.7.7.1.3.1.2 | ColumnbcsSimScsEcmgRedundancyConfigAutoSwitchBack | read-write | current | If enabled (2), programs (which were taken away earlier from this ECMG upon its failure) will be automatically switched back to this ECMG after its recovery. I… |
| 1.3.6.1.4.1.1166.7.7.1.3.1.3 | ColumnbcsSimScsEcmgRedundancyConfigManualSwitchBack | read-write | current | When autoswitchback is enabled manual switch back is notActive.When manual switch back Button get pressed Manual switch back state get changed from manualSwitc… |
| 1.3.6.1.4.1.1166.7.7.1.3.1.4 | ColumnbcsSimScsEcmgRedundancyConfigMaxStreams | read-write | current | Maximum number of streams supported.The default value is 128. @Config(config=yes, reboot=yes) |
| 1.3.6.1.4.1.1166.7.7.1.4 | TablebcsSimScsEcmgRedundancyConfigApplyTable | not-accessible | current | Table of Apply Change for the data for bcsSimScsEcmgRedundancyConfigTable. A row of this table corresponds to a row in bcsSimScsEcmgRedundancyConfigTable. |
| 1.3.6.1.4.1.1166.7.7.1.4.1 | RowbcsSimScsEcmgRedundancyConfigApplyEntry | not-accessible | current | ECMG Redundancy Configuration Apply Table Entry. |
| 1.3.6.1.4.1.1166.7.7.1.4.1.1 | ColumnbcsSimScsEcmgRedundancyConfigApplyIndex | not-accessible | current | ECMG index - also maps to the bcsSimScsEcmgRedundancyConfigTable index |
| 1.3.6.1.4.1.1166.7.7.1.4.1.2 | ColumnbcsSimScsEcmgRedundancyConfigApplyChange | read-write | current | The Apply for a row of data in bcsSimScsEcmgRedundancyConfigTable. A row in this table corresponds to the same row index in the bcsSimScsEcmgRedundancyConfigTa… |
| 1.3.6.1.4.1.1166.7.7.2 | NodebcsSimScsStatus | |||
| 1.3.6.1.4.1.1166.7.7.2.1 | NodebcsSimScsStatusGeneral | |||
| 1.3.6.1.4.1.1166.7.7.2.1.1 | ScalarbcsSimScsMibSupportStatus | read-only | current | Indicates whether the device is capable of supporting and/or enabled to support the functionality of the bcsSimulcryptScs MIB. |
| 1.3.6.1.4.1.1166.7.7.2.1.2 | ScalarbcsSimScsMaxEcmg | read-only | current | The maximum number of ECMGs this device can support. |
| 1.3.6.1.4.1.1166.7.7.2.1.3 | ScalarbcsSimScsMaxPrograms | read-only | current | The maximum number of programs this device can support. |
| 1.3.6.1.4.1.1166.7.7.2.1.4 | ScalarbcsSimScsMaxProgramEcmg | read-only | current | The maximum number of ECMGs that can be associated with a program in this device. |
| 1.3.6.1.4.1.1166.7.7.2.1.5 | ScalarbcsSimScsEcmgRedundancyConfigInvalidApplyText | read-only | current | When bcsSimScsEcmgRedundancyConfigApplyChange is set to 'applyNotInProgressInvalidData' this entry may contain a text description of what was wrong with the da… |
| 1.3.6.1.4.1.1166.7.7.2.2 | TablebcsSimScsEcmgStatusTable | not-accessible | current | It contains status information for the SCS to ECMG connections. There can be up to bcsSimScsMaxEcmg active SCS to ECMG connections at a time. |
| 1.3.6.1.4.1.1166.7.7.2.2.1 | RowbcsSimScsEcmgStatusEntry | not-accessible | current | A single entry in the bcsSimScsEcmgStatusTable table. |
| 1.3.6.1.4.1.1166.7.7.2.2.1.1 | ColumnbcsSimScsEcmgStatusIndex | not-accessible | current | This index is used to traverse the bcsSimScsEcmgTable table. The index varies from 1..bcsSimScsMaxEcmg. In the event that some connections are not active this … |
| 1.3.6.1.4.1.1166.7.7.2.2.1.2 | ColumnbcsSimScsEcmgTcpState | read-only | current | This column specifies TCP connection state of this SCS <==> ECMG connection. |
| 1.3.6.1.4.1.1166.7.7.2.2.1.3 | ColumnbcsSimScsEcmgChannelId | read-only | current | This column specifies channel ID. |
| 1.3.6.1.4.1.1166.7.7.2.2.1.4 | ColumnbcsSimScsEcmgChannelState | read-only | current | This column specifies ECMG channel state of this SCS <==> ECMG connection. |
| 1.3.6.1.4.1.1166.7.7.2.2.1.5 | ColumnbcsSimScsEcmgSuperCasId | read-only | current | This column specifies super CAS Id of the ECMG that the SCS is connected to on this connection. |
| 1.3.6.1.4.1.1166.7.7.2.3 | TablebcsSimScsProgramTable | not-accessible | current | It contains status information for the SCS programs. There can be up to bcsSimScsMaxPrograms Simulcrypt programs active in the SCS at a time. Each program can … |
| 1.3.6.1.4.1.1166.7.7.2.3.1 | RowbcsSimScsProgramEntry | not-accessible | current | A single entry in the bcsSimScsProgramTable table. |
| 1.3.6.1.4.1.1166.7.7.2.3.1.1 | ColumnbcsSimScsProgramIndex | not-accessible | current | This index is used to traverse the bcsSimScsProgramTable table. Limited by bcsSimScsMaxPrograms. |
| 1.3.6.1.4.1.1166.7.7.2.3.1.2 | ColumnbcsSimScsProgramEcmgIndex | not-accessible | current | ECMG index. This index is used to traverse the bcsSimScsProgramTable table. Limited by bcsSimScsMaxProgramEcmg. |
| 1.3.6.1.4.1.1166.7.7.2.3.1.3 | ColumnbcsSimScsProgramState | read-only | current | This column displays the service state of this program. (1) - program configured, no event running (2) - program configured, event running normally (3) - progr… |
| 1.3.6.1.4.1.1166.7.7.2.3.1.4 | ColumnbcsSimScsProgramCryptoPeriod | read-only | current | This column displays the actual crypto-period in seconds that is in use for this program. |
| 1.3.6.1.4.1.1166.7.7.2.3.1.5 | ColumnbcsSimScsProgramChannelId | read-only | current | This column displays the channel ID. |
| 1.3.6.1.4.1.1166.7.7.2.3.1.6 | ColumnbcsSimScsProgramEcmgSuperCasId | read-only | current | This column displays the Super CAS-ID of the 1st ECMG on this service. |
| 1.3.6.1.4.1.1166.7.7.2.3.1.7 | ColumnbcsSimScsProgramEcmgStreamState | read-only | current | This column displays the stream state for an ECMG on this service. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ApplyDataToDeviceTYPE | INTEGER { applyNotInProgress (1), apply (2), applyNotInProgressValidData (3), applyNotInProgressInvalidData (4) } | ||
| EnableDisableTYPE | INTEGER { disabled (1), enabled (2) } | ||
| ManualSwitchBackTYPE | INTEGER { manualSwitchBackNotInProgress (1), manualSwitchBack (2) } |