BFD-MIB-DRAFT-00
57 objects
Bidirectional Forwarding Management Information Base.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.999 | IdentitybfdMIB | Bidirectional Forwarding Management Information Base. | ||
| 1.3.6.1.2.1.999.0 | NodebfdNotifications | |||
| 1.3.6.1.2.1.999.0.1 | NotificationbfdSessUp | current | This notification is generated when the bfdSessState object for one or more contiguous entries in bfdSessTable are about to enter the up(2) state from some oth… | |
| 1.3.6.1.2.1.999.0.2 | NotificationbfdSessDown | current | This notification is generated when the bfdSessState object for one or more contiguous entries in bfdSessTable are about to enter the down(4) or adminDown(5) s… | |
| 1.3.6.1.2.1.999.1 | NodebfdObjects | |||
| 1.3.6.1.2.1.999.1.1 | NodebfdScalarObjects | |||
| 1.3.6.1.2.1.999.1.1.1 | ScalarbfdAdminStatus | read-write | current | The global administrative status of BFD in this router. T. Nadeau and Z. Ali Page 5 2/9/2004 draft-nadeau-bfd-mib-00.txt February 2004 The value 'enabled' deno… |
| 1.3.6.1.2.1.999.1.1.2 | ScalarbfdOperStatus | read-only | current | The operational status of BFD on this router. |
| 1.3.6.1.2.1.999.1.1.3 | ScalarbfdVersionNumber | read-only | current | The current version number of the BFD protocol. |
| 1.3.6.1.2.1.999.1.1.4 | ScalarbfdSessNotificationsEnable | read-write | current | If this object is set to true(1), then it enables T. Nadeau and Z. Ali Page 16 2/9/2004 draft-nadeau-bfd-mib-00.txt February 2004 the emission of bfdSessUp and… |
| 1.3.6.1.2.1.999.1.2 | TablebfdSessTable | not-accessible | current | The BFD Session Table describes the BFD sessions. |
| 1.3.6.1.2.1.999.1.2.1 | RowbfdSessEntry | not-accessible | current | The BFD Session Entry describes BFD session. |
| 1.3.6.1.2.1.999.1.2.1.1 | ColumnbfdSessIndex | read-only | current | This object contains an index used to represent a unique BFD session on this device. |
| 1.3.6.1.2.1.999.1.2.1.2 | ColumnbfdSessApplicationId | read-only | current | This object contains an index used to indicate a local application which owns or maintains this BFD session. For instance, the MPLS VPN process may maintain a … |
| 1.3.6.1.2.1.999.1.2.1.3 | ColumnbfdSessDiscriminator | read-only | current | This object specifies the local discriminator for this BFD session, used to uniquely identify it. |
| 1.3.6.1.2.1.999.1.2.1.4 | ColumnbfdSessRemoteDiscr | read-only | current | This object specifies the session discriminator chosen by the remote system for this BFD session. |
| 1.3.6.1.2.1.999.1.2.1.5 | ColumnbfdSessUdpPort | read-create | current | The UDP Port for BFD. The default value is the well-known value for this port. |
| 1.3.6.1.2.1.999.1.2.1.6 | ColumnbfdSessState | read-only | current | The perceived state of the BFD session. |
| 1.3.6.1.2.1.999.1.2.1.7 | ColumnbfdSessRemoteHeardFlag | read-only | current | This object specifies status of BFD packet reception from the remote system. Specifically, it is set to true(1) if the local system is actively receiving BFD p… |
| 1.3.6.1.2.1.999.1.2.1.8 | ColumnbfdSessDiag | accessible-for-notify | current | A diagnostic code specifying the local system's reason for the last transition of the session from up(1) to some other state. |
| 1.3.6.1.2.1.999.1.2.1.9 | ColumnbfdSessOperMode | read-only | current | This object specifies current operating mode that BFD session is operating in. A value of AsyncModeWEchoFun(1) ... A value of AsynchModeWOEchoFun(2) ... A valu… |
| 1.3.6.1.2.1.999.1.2.1.10 | ColumnbfdSessDemandModeDesiredFlag | read-create | current | This object indicates that the local system's desire to use Demand mode. Specifically, it is set to true(1) if the local system wishes to use Demand mode or fa… |
| 1.3.6.1.2.1.999.1.2.1.11 | ColumnbfdSessEchoFuncModeDesiredFlag | read-create | current | This object indicates that the local system's desire to use Echo mode. Specifically, it is set to true(1) if the local system wishes to use Echo mode or false(… |
| 1.3.6.1.2.1.999.1.2.1.12 | ColumnbfdSessAddrType | read-create | current | This object specifies IP address of the interface associated with this BFD session. Only values unknown(0), ipv4(1) or ipv6(2) have to be supported. A value of… |
| 1.3.6.1.2.1.999.1.2.1.13 | ColumnbfdSessAddr | read-create | current | This object specifies IP address of the interface associated with this BFD session. It can also be used to enabled BFD on a specific interface. The value is se… |
| 1.3.6.1.2.1.999.1.2.1.14 | ColumnbfdSessDesiredMinTxInterval | read-create | current | This object specifies the minimum interval, in microseconds, that the local system would like to use when transmitting BFD Control packets. |
| 1.3.6.1.2.1.999.1.2.1.15 | ColumnbfdSessDesiredMinRxInterval | read-create | current | This object specifies the minimum interval, in microseconds, between received BFD Control packets the local system is capable of supporting. |
| 1.3.6.1.2.1.999.1.2.1.16 | ColumnbfdSessDesiredMinEchoRxInterval | read-create | current | This object specifies the minimum interval, in microseconds, between received BFD Echo packets that this system is capable of supporting. |
| 1.3.6.1.2.1.999.1.2.1.17 | ColumnbfdSessDetectMult | read-create | current | This object specifies the Detect time multiplier. |
| 1.3.6.1.2.1.999.1.2.1.18 | ColumnbfdSessStorType | read-create | current | This variable indicates the storage type for this object. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in t… |
| 1.3.6.1.2.1.999.1.2.1.19 | ColumnbfdSessRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table has a row in the active(1) state, no objects in this row c… |
| 1.3.6.1.2.1.999.1.3 | TablebfdSessPerfTable | not-accessible | current | This table specifies BFD Session performance counters. |
| 1.3.6.1.2.1.999.1.3.1 | RowbfdSessPerfEntry | not-accessible | current | An entry in this table is created by a BFD-enabled node for every BFD Session. bfdCounterDiscontinuityTime is used to indicate potential discontinuity for all … |
| 1.3.6.1.2.1.999.1.3.1.1 | ColumnbfdSessPerfPktIn | read-only | current | The total number of BFD messages received for this BFD session. |
| 1.3.6.1.2.1.999.1.3.1.2 | ColumnbfdSessPerfPktOut | read-only | current | The total number of BFD messages sent for this BFD session. |
| 1.3.6.1.2.1.999.1.3.1.3 | ColumnbfdSessPerfBadDiscrim | read-only | current | The total number of BFD messages received with a bad local Discriminator value for this BFD session. |
| 1.3.6.1.2.1.999.1.3.1.4 | ColumnbfdSessPerfLastSessDownTime | read-only | current | The value of sysUpTime on the most recent occasion at which the last time communication was lost with the neighbor. If no such down event exist this object con… |
| 1.3.6.1.2.1.999.1.3.1.5 | ColumnbfdSessPerfLastCommLostDiag | read-only | current | The BFD diag code for the last time communication was lost with the neighbor. If no such down event exists this object contains a zero value. |
| 1.3.6.1.2.1.999.1.3.1.6 | ColumnbfdSessPerfSessDownCount | read-only | current | The number of times this session has gone into the down state since the router last rebooted. |
| 1.3.6.1.2.1.999.1.3.1.7 | ColumnbfdSessPerfDiscTime | read-only | current | The value of sysUpTime on the most recent occasion at which any one or more of the session counters suffered a discontinuity. The relevant counters are the spe… |
| 1.3.6.1.2.1.999.1.3.1.8 | ColumnbfdSessPerfPktInHC | read-only | current | This value represents the total number of BFD messages received for this BFD session. It MUST be equal to the least significant 32 bits of bfdSessPerfPktIn if … |
| 1.3.6.1.2.1.999.1.3.1.9 | ColumnbfdSessPerfPktOutHC | read-only | current | This value represents the total number of total number of BFD messages transmitted for this BFD session. It MUST be equal to the least significant 32 bits of b… |
| 1.3.6.1.2.1.999.1.3.1.10 | ColumnbfdSessPerfBadDiscrimHC | read-only | current | This value represents the total number of total number of BFD messages received with a bad local Discriminator value for this BFD session. It MUST be equal to … |
| 1.3.6.1.2.1.999.1.4 | TablebfdSessMapTable | not-accessible | current | The BFD Session Mapping Table maps the complex indexing of the BFD sessions to the flat BFDIndex used in the BfdSessionTable. T. Nadeau and Z. Ali Page 15 2/9/… |
| 1.3.6.1.2.1.999.1.4.1 | RowbfdSessMapEntry | not-accessible | current | The BFD Session Entry describes BFD session that is mapped to this index. |
| 1.3.6.1.2.1.999.1.4.1.1 | ColumnbfdSessMapBfdIndex | read-only | current | This object specifies the BfdIndex referred to by the indexes of this row. In essence, a mapping is provided between these indexes and the BfdSessTable. |
| 1.3.6.1.2.1.999.3 | NodebfdConformance | |||
| 1.3.6.1.2.1.999.3.1 | NodebfdGroups | |||
| 1.3.6.1.2.1.999.3.1.1 | GroupbfdSessionGroup | current | Collection of objects needed for BFD sessions. | |
| 1.3.6.1.2.1.999.3.1.2 | GroupbfdSessionPerfGroup | current | Collection of objects needed to monitor the performance of BFD sessions. | |
| 1.3.6.1.2.1.999.3.1.3 | GroupbfdSessionPerfHCGroup | current | Collection of objects needed to monitor the performance of BFD sessions for which the values of bfdSessPerfPktIn, bfdSessPerfPktOut, or bfdSessPerfBadDiscrim w… | |
| 1.3.6.1.2.1.999.3.1.4 | GroupbfdNotificationGroup | current | Set of notifications implemented in this module. | |
| 1.3.6.1.2.1.999.3.2 | NodebfdCompliances | |||
| 1.3.6.1.2.1.999.3.2.1 | CompliancebfdModuleFullCompliance | current | Compliance statement for agents that provide full support for BFD-MIB. Such devices can then be monitored and also be configured using this MIB module. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BfdDiag | INTEGER { noDiagnostic(1), controlDetectionTimeExpired(2), echoFunctionFailed(3), neighborSignaledSessionDown(4), forwardingPlaneReset(5), pathDown(6), concatenatedPathDown(7), administrativelyDown(8) } | current | A common BFD diagnostic code. |
| BfdInterval | Unsigned32 (1..4294967295) | current | The BFD interval delay in microseconds. |
| BfdSessIndexTC | Unsigned32 (1..4294967295) | current | An index used to uniquely identify BFD sessions. |