BIANCA-BRICK-IPSEC-MIB
195 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter IpAddress TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3 | Nodeorg | |||
| 1.3.6 | Nodedod | |||
| 1.3.6.1 | Nodeinternet | |||
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.272 | Nodebintec | |||
| 1.3.6.1.4.1.272.4 | Nodebibo | |||
| 1.3.6.1.4.1.272.4.26 | Nodeipsec | |||
| 1.3.6.1.4.1.272.4.26.1 | NodeipsecGlobals | |||
| 1.3.6.1.4.1.272.4.26.1.1 | ScalaripsecGlobPeerIndex | read-write | mandatory | Index of first IPsec peer in ipsecPeerTable. If this object is set to a Value <= 0, IPSec is switched explicitly off. If the peer referenced by this object doe… |
| 1.3.6.1.4.1.272.4.26.1.2 | ScalaripsecGlobDefaultAuthMethod | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.1.3 | ScalaripsecGlobDefaultCertificate | read-write | mandatory | The index of the default certificate in the certTable used for local authentication for ike keyed rules with non pre-shared-key authentication. This may be ove… |
| 1.3.6.1.4.1.272.4.26.1.4 | ScalaripsecGlobDefaultLocalId | read-write | mandatory | The default ID used for local authentication for ike keyed rules. If this is an empty or invaid id string one of the subject alternative names or the subject n… |
| 1.3.6.1.4.1.272.4.26.1.5 | ScalaripsecGlobDefaultIpsecProposal | read-write | mandatory | Index of default ipsec proposal used for traffic entries with empty ipsec proposal, defined for peers with empty default ipsec proposal. |
| 1.3.6.1.4.1.272.4.26.1.6 | ScalaripsecGlobDefaultIkeProposal | read-write | mandatory | Index of default ike proposal used for peers with empty default ike proposal. |
| 1.3.6.1.4.1.272.4.26.1.7 | ScalaripsecGlobDefaultIpsecLifeTime | read-write | mandatory | Index of default lifetime for ike SA's in ipsecLifeTimeTable. This lifetime is used, when there is no valid lifetime entry specified for an IPsec peer entry. |
| 1.3.6.1.4.1.272.4.26.1.8 | ScalaripsecGlobDefaultIkeLifeTime | read-write | mandatory | Index of default lifetime for ipsec SA's in ipsecLifeTimeTable. This lifetime is used, when there is no valid lifetime entry specified for an IPsec SA, its tra… |
| 1.3.6.1.4.1.272.4.26.1.9 | ScalaripsecGlobDefaultIkeGroup | read-write | mandatory | Index of default IKE group used for peer entries with empty or invalid ike group. Possible values: 1 (768 bit MODP), 2 (1024 bit MODP), 5 (1536 bit MODP). |
| 1.3.6.1.4.1.272.4.26.1.10 | ScalaripsecGlobMaxSysLogLevel | read-write | mandatory | Maximum level for syslog messages issued by IPSec. All messages with a level higher than this value are suppressed, independently from other global syslog leve… |
| 1.3.6.1.4.1.272.4.26.1.11 | ScalaripsecGlobDefaultGranularity | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.1.12 | ScalaripsecGlobDefaultPh1Mode | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.1.13 | ScalaripsecGlobDefaultPfsGroup | read-write | mandatory | This object specifies the PFS group to use. PFS is done only for phase 2, i.e. the Phase 1 SAs are not deleted after phase 2 negotiation is completed. Note how… |
| 1.3.6.1.4.1.272.4.26.1.20 | ScalaripsecGlobIkePort | read-write | mandatory | This object specifies the port the IKE key management service listens to. |
| 1.3.6.1.4.1.272.4.26.1.21 | ScalaripsecGlobMaxRetries | read-write | mandatory | This object specifies the maximum number of retries sent by IKE for one message. |
| 1.3.6.1.4.1.272.4.26.1.22 | ScalaripsecGlobRetryTimeout0milli | read-write | mandatory | This object specifies the period of time in milliseconds before an IKE message is repeated for the first time if the answer is missing. After each retry, this … |
| 1.3.6.1.4.1.272.4.26.1.23 | ScalaripsecGlobRetryTimeoutMaxsec | read-write | mandatory | This object specifies the maximum period of time in seconds before an IKE message is repeated if the answer is missing. The retry timeout is not increased beyo… |
| 1.3.6.1.4.1.272.4.26.1.24 | ScalaripsecGlobMaxNegotiationTimeoutsec | read-write | mandatory | This object specifies the maximum number of seconds after which a negotiation is canceled if it is not finished. |
| 1.3.6.1.4.1.272.4.26.1.25 | ScalaripsecGlobMaxIkeSas | read-write | mandatory | This object specifies the maximum number of simultaneous ISAKMP Security associations allowed. If this limit is reached, the entries are removed from the datab… |
| 1.3.6.1.4.1.272.4.26.1.26 | ScalaripsecGlobAntiCloggingLength | read-write | mandatory | This object specifies the length in bits of the local secret used for ISAKMP anti-clogging cookies. |
| 1.3.6.1.4.1.272.4.26.1.27 | ScalaripsecGlobAntiCloggingHash | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.1.28 | ScalaripsecGlobLocalSecretPeriodsec | read-write | mandatory | This object specifies the period of time in seconds after which a new secret for creating local anti-clogging tokens is created. The previous secret is remembe… |
| 1.3.6.1.4.1.272.4.26.1.29 | ScalaripsecGlobIgnoreCrPayloads | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.1.30 | ScalaripsecGlobNoCrPayloads | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.1.31 | ScalaripsecGlobNoKeyHashPayloads | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.1.32 | ScalaripsecGlobNoCrls | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.1.33 | ScalaripsecGlobSendFullCertChains | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.1.34 | ScalaripsecGlobTrustIcmpMsg | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.1.35 | ScalaripsecGlobSpiSize | read-write | mandatory | A compatibility flag that specifies the length of the SPI in bytes, which is used when an ISAKMP SA SPI (Cookie) is sent to the remote peer. This field takes e… |
| 1.3.6.1.4.1.272.4.26.1.36 | ScalaripsecGlobZeroIsakmpCookies | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.1.37 | ScalaripsecGlobMaxKeyLength | read-write | mandatory | This object specifies the maximum length of an encryption key (in bits) that is accepted from the remote end. This limit prevents denial of service attacks whe… |
| 1.3.6.1.4.1.272.4.26.1.38 | ScalaripsecGlobNoInitialContact | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.2 | TableipsecPublicKeyTable | not-accessible | mandatory | This table contains the list of public key pairs and ID's used with IPSec. |
| 1.3.6.1.4.1.272.4.26.2.1 | RowipsecPubKeyEntry | not-accessible | mandatory | This object contains a key pair for a certain public key algorithm and the ids used together with this key. |
| 1.3.6.1.4.1.272.4.26.2.1.1 | ColumnipsecPubKeyIndex | read-only | mandatory | A unique index for this entry. |
| 1.3.6.1.4.1.272.4.26.2.1.2 | ColumnipsecPubKeyDescription | read-write | mandatory | An optional description for this key. |
| 1.3.6.1.4.1.272.4.26.2.1.3 | ColumnipsecPubKeyAlgorithm | read-only | mandatory | |
| 1.3.6.1.4.1.272.4.26.2.1.4 | ColumnipsecPubKeyKeyLength | read-only | mandatory | The size of the public and private keys in bits. |
| 1.3.6.1.4.1.272.4.26.3 | TableipsecSaTable | not-accessible | mandatory | This table contains the list of currently active IPSec security associations. |
| 1.3.6.1.4.1.272.4.26.3.1 | RowipsecSaEntry | not-accessible | mandatory | This object contains an IPSec security association. |
| 1.3.6.1.4.1.272.4.26.3.1.1 | ColumnipsecSaIndex | read-only | mandatory | A unique index for this entry. |
| 1.3.6.1.4.1.272.4.26.3.1.3 | ColumnipsecSaState | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.3.1.4 | ColumnipsecSaCreator | read-only | mandatory | |
| 1.3.6.1.4.1.272.4.26.3.1.5 | ColumnipsecSaDir | read-only | mandatory | |
| 1.3.6.1.4.1.272.4.26.3.1.6 | ColumnipsecSaMode | read-only | mandatory | |
| 1.3.6.1.4.1.272.4.26.3.1.7 | ColumnipsecSaSecProto | read-only | mandatory | |
| 1.3.6.1.4.1.272.4.26.3.1.8 | ColumnipsecSaLocalIp | read-only | mandatory | The local IP address of the outer packet header. For transport mode SAs, this address is the same as the ipsecSaSrcAddress. |
| 1.3.6.1.4.1.272.4.26.3.1.9 | ColumnipsecSaPeerIp | read-only | mandatory | The destination IP address of the outer packet header. For transport mode SAs, this address is the same as the ipsecSaDstAddress. |
| 1.3.6.1.4.1.272.4.26.3.1.10 | ColumnipsecSaSrcAddress | read-only | mandatory | The address of the source network this SA covers (if the SrcRange field is nonzero, this is the first address of a range of addresses). |
| 1.3.6.1.4.1.272.4.26.3.1.11 | ColumnipsecSaSrcMaskLen | read-only | mandatory | The mask length of the source network this SA covers (only meaningful, if the SrcRange field is zero). |
| 1.3.6.1.4.1.272.4.26.3.1.12 | ColumnipsecSaSrcRange | read-only | mandatory | The last address of a range of source addresses (starting with SrcAddress) this SA covers. Overrides SrcMaskLen. |
| 1.3.6.1.4.1.272.4.26.3.1.13 | ColumnipsecSaDstAddress | read-only | mandatory | The address of the destination network this SA covers (if the DstRange field is nonzero, this is the first address of a range of addresses). |
| 1.3.6.1.4.1.272.4.26.3.1.14 | ColumnipsecSaDstMaskLen | read-only | mandatory | The mask length of the destination network this SA covers (only meaningful, if the DstRange field is zero). |
| 1.3.6.1.4.1.272.4.26.3.1.15 | ColumnipsecSaDstRange | read-only | mandatory | The last address of a range of destination addresses (starting with DstAddress) this SA covers. Overrides DstMaskLen. |
| 1.3.6.1.4.1.272.4.26.3.1.17 | ColumnipsecSaSpi | read-only | mandatory | The Security Parameters Index of this SA. |
| 1.3.6.1.4.1.272.4.26.3.1.18 | ColumnipsecSaAuthAlg | read-only | mandatory | |
| 1.3.6.1.4.1.272.4.26.3.1.19 | ColumnipsecSaEncAlg | read-only | mandatory | |
| 1.3.6.1.4.1.272.4.26.3.1.21 | ColumnipsecSaAuthKeyLen | read-only | mandatory | The length of the key used for authentication, if any. |
| 1.3.6.1.4.1.272.4.26.3.1.22 | ColumnipsecSaEncKeyLen | read-only | mandatory | The length of the key used for encryption, if any. |
| 1.3.6.1.4.1.272.4.26.3.1.25 | ColumnipsecSaLifeSeconds | read-only | mandatory | The period in seconds after which this SA will be destroyed. |
| 1.3.6.1.4.1.272.4.26.3.1.26 | ColumnipsecSaLifeKBytes | read-only | mandatory | The amount of data allowed to be protected by this SA until it is destroyed. |
| 1.3.6.1.4.1.272.4.26.3.1.27 | ColumnipsecSaProto | read-only | mandatory | The protocol this SA covers. |
| 1.3.6.1.4.1.272.4.26.3.1.28 | ColumnipsecSaSrcPort | read-only | mandatory | The source port this SA covers, 0 for any. |
| 1.3.6.1.4.1.272.4.26.3.1.29 | ColumnipsecSaDstPort | read-only | mandatory | The destination port this SA covers, 0 for any. |
| 1.3.6.1.4.1.272.4.26.3.1.30 | ColumnipsecSaSeconds | read-only | mandatory | The number of seconds since this SA was created. |
| 1.3.6.1.4.1.272.4.26.3.1.31 | ColumnipsecSaBytes | read-only | mandatory | The amount of data in kilobytes protected by this SA. |
| 1.3.6.1.4.1.272.4.26.3.1.32 | ColumnipsecSaPackets | read-only | mandatory | The number of packets protected by this SA. |
| 1.3.6.1.4.1.272.4.26.3.1.33 | ColumnipsecSaReplayErrors | read-only | mandatory | The number of replayed packets detected for this SA. |
| 1.3.6.1.4.1.272.4.26.3.1.34 | ColumnipsecSaRecvErrors | read-only | mandatory | The number of receive errors (replayed packets not counted) detected for this SA. |
| 1.3.6.1.4.1.272.4.26.3.1.35 | ColumnipsecSaDecryptErrors | read-only | mandatory | The number of decryption errors (ESP only) detected for this SA. |
| 1.3.6.1.4.1.272.4.26.4 | TableikeSaTable | not-accessible | mandatory | This table contains the list of currently active IKE security associations. |
| 1.3.6.1.4.1.272.4.26.4.1 | RowikeSaEntry | not-accessible | mandatory | This object contains an IKE security association. |
| 1.3.6.1.4.1.272.4.26.4.1.1 | ColumnikeSaIndex | read-only | mandatory | A unique index for this entry. |
| 1.3.6.1.4.1.272.4.26.4.1.3 | ColumnikeSaState | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.4.1.4 | ColumnikeSaXchType | read-only | mandatory | |
| 1.3.6.1.4.1.272.4.26.4.1.5 | ColumnikeSaAuthMethod | read-only | mandatory | |
| 1.3.6.1.4.1.272.4.26.4.1.6 | ColumnikeSaAlgs | read-only | mandatory | The names of the encryption and hash algorithm and of the prf. |
| 1.3.6.1.4.1.272.4.26.4.1.7 | ColumnikeSaRole | read-only | mandatory | |
| 1.3.6.1.4.1.272.4.26.4.1.8 | ColumnikeSaLocalId | read-only | mandatory | The local ID used for authentication. |
| 1.3.6.1.4.1.272.4.26.4.1.9 | ColumnikeSaRemoteId | read-only | mandatory | The remote ID used for authentication. |
| 1.3.6.1.4.1.272.4.26.4.1.11 | ColumnikeSaRemoteIp | read-only | mandatory | The remote IP address used in the IKE communication. |
| 1.3.6.1.4.1.272.4.26.4.1.12 | ColumnikeSaCookieI | read-only | mandatory | The cookie of the initiator. |
| 1.3.6.1.4.1.272.4.26.4.1.13 | ColumnikeSaCookieR | read-only | mandatory | The cookie of the responder. |
| 1.3.6.1.4.1.272.4.26.4.1.14 | ColumnikeSaTimes | read-only | mandatory | The creation time and last used time of the SA in human readable format. |
| 1.3.6.1.4.1.272.4.26.4.1.15 | ColumnikeSaNumCerts | read-only | mandatory | The number of certificates received from the remote side when negotiating this SA. |
| 1.3.6.1.4.1.272.4.26.4.1.16 | ColumnikeSaNumNegotiations | read-only | mandatory | This object specifies the number of currently active negotiations for this SA. |
| 1.3.6.1.4.1.272.4.26.4.1.17 | ColumnikeSaBytes | read-only | mandatory | Number of bytes transmitted using this SA. |
| 1.3.6.1.4.1.272.4.26.4.1.18 | ColumnikeSaMajVersion | read-only | mandatory | The IKE major version number. |
| 1.3.6.1.4.1.272.4.26.4.1.19 | ColumnikeSaMinVersion | read-only | mandatory | The IKE minor version number. |
| 1.3.6.1.4.1.272.4.26.5 | TableipsecPeerTable | not-accessible | mandatory | This table contains the list of IPSec peers. |
| 1.3.6.1.4.1.272.4.26.5.1 | RowipsecPeerEntry | not-accessible | mandatory | This object contains the description of an IPSec peer. |
| 1.3.6.1.4.1.272.4.26.5.1.1 | ColumnipsecPeerIndex | read-only | mandatory | A unique index identifying this entry. |
| 1.3.6.1.4.1.272.4.26.5.1.2 | ColumnipsecPeerNextIndex | read-write | mandatory | The index of the next peer in hierarchy. |
| 1.3.6.1.4.1.272.4.26.5.1.3 | ColumnipsecPeerDescription | read-write | mandatory | An optional description for this peer. |
| 1.3.6.1.4.1.272.4.26.5.1.5 | ColumnipsecPeerPeerIds | read-write | mandatory | The IDs of the peer which are accepted for authentication. |
| 1.3.6.1.4.1.272.4.26.5.1.6 | ColumnipsecPeerPeerAddress | read-write | mandatory | The IP-address of the peer. |
| 1.3.6.1.4.1.272.4.26.5.1.7 | ColumnipsecPeerLocalId | read-write | mandatory | The local ID used for authentication. |
| 1.3.6.1.4.1.272.4.26.5.1.8 | ColumnipsecPeerLocalAddress | read-write | mandatory | The local address used for IPSec encrypted packets. |
| 1.3.6.1.4.1.272.4.26.5.1.9 | ColumnipsecPeerLocalCert | read-write | mandatory | The index of the certificate used for local authentication in the certTable. Only useful for automatically keyed traffic with dsa or rsa authentication. |
| 1.3.6.1.4.1.272.4.26.5.1.10 | ColumnipsecPeerIkeProposals | read-write | mandatory | The index of the first IKE proposal which may be used for IKE SA negotiation with this peer. |
| 1.3.6.1.4.1.272.4.26.5.1.11 | ColumnipsecPeerTrafficList | read-write | mandatory | This object specifies the first entry of possibly a chain of traffic entries from the ipsecTrafficTable which should be protected with IPSec using this peer. |
| 1.3.6.1.4.1.272.4.26.5.1.20 | ColumnipsecPeerAuthMethod | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.5.1.21 | ColumnipsecPeerPreSharedKey | read-write | mandatory | The pre-shared-key used with this peer, if pre-shared-keys are used for authentication. This field serves only as an input field and its contents are replaced … |
| 1.3.6.1.4.1.272.4.26.5.1.22 | ColumnipsecPeerIkeGroup | read-write | mandatory | The Group used for Diffie Hellman key agreement algorithm. Possible values: 0: use default value from ipsecGlobals table 1: a 768-bit MODP group 2: a 1024-bit … |
| 1.3.6.1.4.1.272.4.26.5.1.23 | ColumnipsecPeerPfsGroup | read-write | mandatory | The Diffie Hellman group used for additional Perfect Forward Secrecy (PFS) DH exponentiations. Possible values: -1: explicitly do not use PFS (overrides ipsecG… |
| 1.3.6.1.4.1.272.4.26.5.1.24 | ColumnipsecPeerPh1Mode | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.5.1.25 | ColumnipsecPeerIkeLifeTime | read-write | mandatory | This object specifies an index in the ipsecLifeTimeTable. If the lifetime pointed to by this index does not exist or is inappropriate, the default lifetime fro… |
| 1.3.6.1.4.1.272.4.26.5.1.26 | ColumnipsecPeerIpsecLifeTime | read-write | mandatory | This object specifies an index in the ipsecLifeTimeTable. This lifetime overwrites the lifetimes specified for all traffic entries and their proposals referenc… |
| 1.3.6.1.4.1.272.4.26.5.1.29 | ColumnipsecPeerKeepAlive | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.5.1.30 | ColumnipsecPeerGranularity | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.5.1.31 | ColumnipsecPeerDontVerifyPad | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.5.1.42 | ColumnipsecPeerDefaultIpsecProposals | read-write | mandatory | The index of the default IPSec proposal used for encrypting all the traffic bound to the (optional) logical interface created for this peer. |
| 1.3.6.1.4.1.272.4.26.5.1.63 | ColumnipsecPeerPreSharedKeyData | not-accessible | mandatory | Field used for storing the pre-shared-key permanently. |
| 1.3.6.1.4.1.272.4.26.6 | TableikeProposalTable | not-accessible | mandatory | This table contains the list of IKE proposals. The entries may be concatenated on a logical or basis using the NextChoice field to choices of multiple proposal… |
| 1.3.6.1.4.1.272.4.26.6.1 | RowikeProposalEntry | not-accessible | mandatory | This object contains an IKE proposal, i.e. the encryption algorithm and the hash algorithm used to protect traffic sent over an IKE SA. |
| 1.3.6.1.4.1.272.4.26.6.1.1 | ColumnikePropIndex | read-only | mandatory | A unique index identifying this entry. |
| 1.3.6.1.4.1.272.4.26.6.1.2 | ColumnikePropNextChoice | read-write | mandatory | This object specifies the index of the next proposal of a choice of proposals. If this object is 0, this marks the end of a proposal chain. |
| 1.3.6.1.4.1.272.4.26.6.1.3 | ColumnikePropDescription | read-write | mandatory | An optional textual description of the proposal chain beginning at this entry. |
| 1.3.6.1.4.1.272.4.26.6.1.4 | ColumnikePropEncAlg | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.6.1.5 | ColumnikePropHashAlg | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.7 | TableipsecTrafficTable | not-accessible | mandatory | This table contains lists of Traffic and the actions which should be applied to it, together with the necessary parameters. |
| 1.3.6.1.4.1.272.4.26.7.1 | RowipsecTrafficEntry | not-accessible | mandatory | This object contains a description of a type of IP traffic and the action which should be applied to it together with the necessary parameters. |
| 1.3.6.1.4.1.272.4.26.7.1.1 | ColumnipsecTrIndex | read-only | mandatory | A unique index identifying this entry. |
| 1.3.6.1.4.1.272.4.26.7.1.2 | ColumnipsecTrNextIndex | read-write | mandatory | This object specifies the index of the next traffic entry in hierarchy. |
| 1.3.6.1.4.1.272.4.26.7.1.3 | ColumnipsecTrDescription | read-write | mandatory | An optional human readable description for this traffic entry. |
| 1.3.6.1.4.1.272.4.26.7.1.4 | ColumnipsecTrLocalAddress | read-write | mandatory | The source IP-address of this traffic entry. It maybe either a single address, a network address (in combination with ipsecTrSrcMask), or the first address of … |
| 1.3.6.1.4.1.272.4.26.7.1.5 | ColumnipsecTrLocalMaskLen | read-write | mandatory | The length of the network mask for a source network. |
| 1.3.6.1.4.1.272.4.26.7.1.6 | ColumnipsecTrLocalRange | read-write | mandatory | The last address of a source address range. If this field is nonzero, the ipsecTrLocalMaskLen field is ignored and the source is considered as a range of addre… |
| 1.3.6.1.4.1.272.4.26.7.1.7 | ColumnipsecTrRemoteAddress | read-write | mandatory | The destination IP-address of this traffic entry. It maybe either a single address, a network address (in combination with ipsecTrDstMask), or the first addres… |
| 1.3.6.1.4.1.272.4.26.7.1.8 | ColumnipsecTrRemoteMaskLen | read-write | mandatory | The length of the network mask for a destination network. |
| 1.3.6.1.4.1.272.4.26.7.1.9 | ColumnipsecTrRemoteRange | read-write | mandatory | The last address of a destination address range. If this field is nonzero, the ipsecTrRemoteMaskLen field is ignored and the source is considered as a range of… |
| 1.3.6.1.4.1.272.4.26.7.1.10 | ColumnipsecTrProto | read-write | mandatory | The transport protocol defined for this entry. |
| 1.3.6.1.4.1.272.4.26.7.1.11 | ColumnipsecTrLocalPort | read-write | mandatory | The source port defined for this traffic entry. |
| 1.3.6.1.4.1.272.4.26.7.1.12 | ColumnipsecTrRemotePort | read-write | mandatory | The destination port defined for this traffic entry. |
| 1.3.6.1.4.1.272.4.26.7.1.13 | ColumnipsecTrAction | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.7.1.14 | ColumnipsecTrProposal | read-write | mandatory | This object specifies an index in the ipsecProposalTable. This may be the first proposal of possibly a choice of multiple, optionally nested proposals which is… |
| 1.3.6.1.4.1.272.4.26.7.1.15 | ColumnipsecTrForceTunnelMode | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.7.1.16 | ColumnipsecTrLifeTime | read-write | mandatory | This object specifies an index in the ipsecLifeTimeTable. This lifetime overwrites the lifetimes specified for all proposals referenced by this traffic entry. … |
| 1.3.6.1.4.1.272.4.26.7.1.17 | ColumnipsecTrGranularity | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.7.1.18 | ColumnipsecTrKeepAlive | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.8 | TableipsecProposalTable | not-accessible | mandatory | This table contains the list of IPSec proposals. The entries may be concatenated on a logical 'or' or a logical 'and' basis -depending on the setting of the 'B… |
| 1.3.6.1.4.1.272.4.26.8.1 | RowipsecProposalEntry | not-accessible | mandatory | This object contains an IPSec proposal, i.e. a proposed set of security parameters applied to traffic sent over an IPSec security association. |
| 1.3.6.1.4.1.272.4.26.8.1.1 | ColumnipsecPropIndex | read-only | mandatory | A unique index for this entry. |
| 1.3.6.1.4.1.272.4.26.8.1.2 | ColumnipsecPropNext | read-write | mandatory | The index of the next Proposal in the actual chain. |
| 1.3.6.1.4.1.272.4.26.8.1.3 | ColumnipsecPropBoolOp | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.8.1.4 | ColumnipsecPropDescription | read-write | mandatory | An optional human readable description for this proposal. |
| 1.3.6.1.4.1.272.4.26.8.1.6 | ColumnipsecPropProto | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.8.1.7 | ColumnipsecPropEncAlg | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.8.1.8 | ColumnipsecPropAuthAlg | read-write | mandatory | |
| 1.3.6.1.4.1.272.4.26.8.1.10 | ColumnipsecPropLifeTime | read-write | mandatory | The index in the ipsecLifeTimeTable containing the lifetime values ued for an SA created from this proposal. This field may be overwritten by an explicit lifet… |
| 1.3.6.1.4.1.272.4.26.8.1.11 | ColumnipsecPropInSpi | read-write | mandatory | This object specifies the Security Parameters Index (SPI) which should be used for the inbound SA of a manually keyed Proposal. The SPI is used to distinguish … |
| 1.3.6.1.4.1.272.4.26.8.1.12 | ColumnipsecPropOutSpi | read-write | mandatory | This object specifies the Security Parameters Index (SPI) which should be used for the outbound SA of a manually keyed Proposal. The SPI is used to distinguish… |
| 1.3.6.1.4.1.272.4.26.8.1.14 | ColumnipsecPropEncKeyIn | read-write | mandatory | This object serves as an input field for the inbound encryption key used with manually keyed SAs. Its contents are reset to a single asterisk immediately after… |
| 1.3.6.1.4.1.272.4.26.8.1.15 | ColumnipsecPropEncKeyOut | read-write | mandatory | This object serves as an input field for the outbound encryption key used with manually keyed SAs. Its contents are reset to a single asterisk immediately afte… |
| 1.3.6.1.4.1.272.4.26.8.1.17 | ColumnipsecPropAuthKeyIn | read-write | mandatory | This object serves as an input field for the inbound authentication key used with manually keyed SAs. Its contents are reset to a single asterisk immediately a… |
| 1.3.6.1.4.1.272.4.26.8.1.18 | ColumnipsecPropAuthKeyOut | read-write | mandatory | This object serves as an input field for the outbound authentication key used with manually keyed SAs. Its contents are reset to a single asterisk immediately … |
| 1.3.6.1.4.1.272.4.26.8.1.33 | ColumnipsecPropEncKeyDataIn | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.26.8.1.34 | ColumnipsecPropEncKeyDataOut | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.26.8.1.35 | ColumnipsecPropAuthKeyDataIn | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.26.8.1.36 | ColumnipsecPropAuthKeyDataOut | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.26.9 | TableipsecLifeTimeTable | not-accessible | mandatory | This table contains the list of defined lifetimes for IPsec and IKE SAs. |
| 1.3.6.1.4.1.272.4.26.9.1 | RowipsecLifeTimeEntry | not-accessible | mandatory | This object contains a lifetime, i.e. the soft and hard expiry limits for IPsec and IKE SA's. |
| 1.3.6.1.4.1.272.4.26.9.1.1 | ColumnipsecLifeIndex | read-only | mandatory | A unique index identifying this entry. |
| 1.3.6.1.4.1.272.4.26.9.1.2 | ColumnipsecLifeType | read-write | mandatory | This object specifies the type of a lifetime entry. |
| 1.3.6.1.4.1.272.4.26.9.1.3 | ColumnipsecLifeSoftKb | read-write | mandatory | The maximum amount of data (in KB) which may be protected by an SA before it is refreshed. |
| 1.3.6.1.4.1.272.4.26.9.1.4 | ColumnipsecLifeSoftSec | read-write | mandatory | The maximum time (in seconds) after which an SA will be refreshed,. |
| 1.3.6.1.4.1.272.4.26.9.1.5 | ColumnipsecLifeHardKb | read-write | mandatory | The maximum amount of data (in KB) which may be protected by an SA before it is deleted. |
| 1.3.6.1.4.1.272.4.26.9.1.6 | ColumnipsecLifeHardSec | read-write | mandatory | The maximum time (in seconds) after which an SA will be refreshed,. |
| 1.3.6.1.4.1.272.4.26.10 | NodeipsecStats | |||
| 1.3.6.1.4.1.272.4.26.10.1 | ScalaripsecStatsCurrentIkeSas | read-only | mandatory | Current number of IKE SA's. |
| 1.3.6.1.4.1.272.4.26.10.2 | ScalaripsecStatsCurrentIpsecSas | read-only | mandatory | Current number of IPSec SA's. |
| 1.3.6.1.4.1.272.4.26.10.3 | ScalaripsecStatsIp | read-only | mandatory | Number of IP packets processed. |
| 1.3.6.1.4.1.272.4.26.10.4 | ScalaripsecStatsNonIp | read-only | mandatory | Number of non-IP packets processed. |
| 1.3.6.1.4.1.272.4.26.10.5 | ScalaripsecStatsAh | read-only | mandatory | Number of AH packets processed. |
| 1.3.6.1.4.1.272.4.26.10.6 | ScalaripsecStatsEsp | read-only | mandatory | Number of ESP packets processed. |
| 1.3.6.1.4.1.272.4.26.10.7 | ScalaripsecStatsDrop | read-only | mandatory | Number of packets dropped. |
| 1.3.6.1.4.1.272.4.26.10.8 | ScalaripsecStatsPass | read-only | mandatory | Number of packets passed plain. |
| 1.3.6.1.4.1.272.4.26.10.9 | ScalaripsecStatsTrig | read-only | mandatory | Number of packets which triggered an IKE negotiation. |
| 1.3.6.1.4.1.272.4.26.10.10 | ScalaripsecStatsFragPkt | read-only | mandatory | Number of partial packets currently being reassembled. |
| 1.3.6.1.4.1.272.4.26.10.11 | ScalaripsecStatsFragBytes | read-only | mandatory | Total size of the partial packets currently being reassembled. |
| 1.3.6.1.4.1.272.4.26.10.12 | ScalaripsecStatsFragNonfirst | read-only | mandatory | Number of non-first fragments currently queued. |
| 1.3.6.1.4.1.272.4.26.11 | NodeipsecGlobalsContinued | |||
| 1.3.6.1.4.1.272.4.26.11.1 | ScalaripsecGlobContPreIpsecRules | read-write | mandatory | This object specifies an index in the IPsec traffic table containing a list of traffic definitions which has to be considered prior to the traffic lists of the… |
| 1.3.6.1.4.1.272.4.26.11.2 | ScalaripsecGlobContDefaultRule | read-write | mandatory |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING | ||
| HexValue | INTEGER |