BIANCA-BRICK-TOKEN-MIB
31 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3 | Nodeorg | |||
| 1.3.6 | Nodedod | |||
| 1.3.6.1 | Nodeinternet | |||
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.272 | Nodebintec | |||
| 1.3.6.1.4.1.272.4 | Nodebibo | |||
| 1.3.6.1.4.1.272.4.11 | Nodetokenring | |||
| 1.3.6.1.4.1.272.4.11.1 | TabletokenringIfTable | not-accessible | mandatory | The tokenringIfTable contains information relating to the interfaces found on the system. Each entry corresponds to a connected TokenRing interface. Entries ca… |
| 1.3.6.1.4.1.272.4.11.1.1 | RowtokenringIfEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.272.4.11.1.1.1 | ColumntokenringIfSlot | read-only | mandatory | Unique Slot of the TokenRing interface. |
| 1.3.6.1.4.1.272.4.11.1.1.2 | ColumntokenringIfState | read-only | mandatory | The TokenRing adapter initialization state |
| 1.3.6.1.4.1.272.4.11.1.1.3 | ColumntokenringIfRingRate | read-write | mandatory | speed of the token ring. |
| 1.3.6.1.4.1.272.4.11.1.1.4 | ColumntokenringIfEarlyTokenRelease | read-write | mandatory | enable or disable early token release. This feature is only valid with the 16 Mbps ring rate |
| 1.3.6.1.4.1.272.4.11.1.1.5 | ColumntokenringIfWrapInterface | read-write | mandatory | enable or disable the wrap interface option. If enabled the ring insertion process is omitted and all user-transmit data appears as receive data. |
| 1.3.6.1.4.1.272.4.11.1.1.6 | ColumntokenringIfMtu | read-write | mandatory | The size of the largest datagram which can be sent/received on the interface, specified in octets. |
| 1.3.6.1.4.1.272.4.11.1.1.7 | ColumntokenringIfOverwritePhysAddress | read-write | mandatory | The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. This overwrites the address defined in the adapter P… |
| 1.3.6.1.4.1.272.4.11.1.1.8 | ColumntokenringIfNAUN | read-only | mandatory | The interface's address of the nearest upstream neighbour. |
| 1.3.6.1.4.1.272.4.11.1.1.9 | ColumntokenringIfLineError | read-only | mandatory | Count of line errors. This counter is incremented whenever 1) a frame is repeated or copied, and 2) the Error Detected Indicator (EDI) is zero in the incoming … |
| 1.3.6.1.4.1.272.4.11.1.1.10 | ColumntokenringIfBurstError | read-only | mandatory | Count of burst errors. This counter is incremented whenever the interface detects the absence of transitions for five half-bit times between SDEL and EDEL, or … |
| 1.3.6.1.4.1.272.4.11.1.1.11 | ColumntokenringIfAriFciError | read-only | mandatory | Count of ARI/FCI errors. This counter is incremented whenever the interface receives an Active Monitor Present (AMP) MAC frame with the ARI/FCI bit equal to ze… |
| 1.3.6.1.4.1.272.4.11.1.1.12 | ColumntokenringIfLostFrameError | read-only | mandatory | Count of lost frames errors. This counter is incremented whenever the interface is in transmit (stripping) mode and fails to receive the end of the frame it tr… |
| 1.3.6.1.4.1.272.4.11.1.1.13 | ColumntokenringIfReceiveCongestionError | read-only | mandatory | Count of receive congestion errors. This counter is incremented whenever the interface in the repeat mode recognizes a frame addressed to it but has no buffer … |
| 1.3.6.1.4.1.272.4.11.1.1.14 | ColumntokenringIfFrameCopiedError | read-only | mandatory | Count of frame copied errors. This counter is incremented whenever the interface in the receive/repeat mode recognizes a frame addressed to its specific addres… |
| 1.3.6.1.4.1.272.4.11.1.1.15 | ColumntokenringIfTokenError | read-only | mandatory | Count of token errors. This counter is only active in the active monitor station. It is incremented when the active monitor detects an error in the token proto… |
| 1.3.6.1.4.1.272.4.11.1.1.16 | ColumntokenringIfDmaBusError | read-only | mandatory | Count of DMA bus errors. This counter is counts the occurences of DMA bus errors that do not exceed the specified abort thresholds |
| 1.3.6.1.4.1.272.4.11.1.1.17 | ColumntokenringIfDmaParityError | read-only | mandatory | Count of DMA parity errors. This counter counts the occurences of DMA parity errors that do not exceed the specified abort thresholds |
| 1.3.6.1.4.1.272.4.11.1.1.18 | ColumntokenringIfSoftError | read-only | mandatory | Count of soft errors that occur during normal operation. A soft error is an error condition that temporarily degrades system performance; however the ring reco… |
| 1.3.6.1.4.1.272.4.11.1.1.19 | ColumntokenringIfSourceRouting | read-write | mandatory | enable or disable source routing. If enabled, a routing information field is added to the frame sent over this interface. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Date | INTEGER | ||
| HexValue | INTEGER |