BKTEL-HFC862-BES-V01-MIB
88 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7501.1.2.114 | Nodebes | |||
| 1.3.6.1.4.1.7501.1.2.114.1 | NodebesCommon | |||
| 1.3.6.1.4.1.7501.1.2.114.1.1 | ScalarbesCommonNumberOfModules | read-only | mandatory | Number of modules in table. |
| 1.3.6.1.4.1.7501.1.2.114.1.2 | TablebesCommonTable | not-accessible | mandatory | The table contains all modules of the BES-type in the NE |
| 1.3.6.1.4.1.7501.1.2.114.1.2.1 | RowbesCommonEntry | not-accessible | mandatory | Common-Values for a module. |
| 1.3.6.1.4.1.7501.1.2.114.1.2.1.1 | ColumnbesNESlot | read-only | mandatory | The slot number of the chassis for which this entry contains management information. |
| 1.3.6.1.4.1.7501.1.2.114.1.2.1.2 | ColumnbesCommonType | read-only | mandatory | The type of physical module. modSlotEmpty indicates an empty slot. A Value of modSlotUnknown indicates that the type of module is unknown. |
| 1.3.6.1.4.1.7501.1.2.114.1.2.1.3 | ColumnbesCommonDescr | read-write | mandatory | A textual description of the module. If not available, this Value should be set to a zero length string. |
| 1.3.6.1.4.1.7501.1.2.114.1.2.1.4 | ColumnbesCommonFirmwareId | read-only | mandatory | The firmware Id of the module. |
| 1.3.6.1.4.1.7501.1.2.114.1.2.1.5 | ColumnbesCommonModuleWidth | read-only | optional | The width of the module in multiples of slots (1, 2, ...) |
| 1.3.6.1.4.1.7501.1.2.114.2 | NodebesStates | |||
| 1.3.6.1.4.1.7501.1.2.114.2.1 | TablebesStatesTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.114.2.1.1 | RowbesStatesEntry | not-accessible | mandatory | Alarms for a module. |
| 1.3.6.1.4.1.7501.1.2.114.2.1.1.1 | ColumnbesStatesBootloader | read-only | mandatory | The device is running in bootloader mode without a legal application software. |
| 1.3.6.1.4.1.7501.1.2.114.2.1.1.2 | ColumnbesStatesCommLoss | read-only | mandatory | The NEC has lost the connection to the device. Reason may be a removed or defective device. Note that this state is set by the NEC and not by the device |
| 1.3.6.1.4.1.7501.1.2.114.2.1.1.3 | ColumnbesStatesTemperatureLow | read-only | mandatory | Device temperature low |
| 1.3.6.1.4.1.7501.1.2.114.2.1.1.4 | ColumnbesStatesTemperatureHigh | read-only | mandatory | Device temperature high |
| 1.3.6.1.4.1.7501.1.2.114.2.1.1.5 | ColumnbesStatesInputVoltageLow | read-only | mandatory | Input supply voltage low |
| 1.3.6.1.4.1.7501.1.2.114.2.1.1.6 | ColumnbesStatesInputVoltageHigh | read-only | mandatory | Input supply voltage high |
| 1.3.6.1.4.1.7501.1.2.114.3 | NodebesConfiguration | |||
| 1.3.6.1.4.1.7501.1.2.114.3.1 | TablebesConfigurationTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.114.3.1.1 | RowbesConfigurationEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.114.3.1.1.1 | ColumnbesConfigNESlotWrite | read-write | optional | By writing this variable a slot can be assigned for devices that dont support hardware slot detection. Reading '-1' means that the slot position is NOT writabl… |
| 1.3.6.1.4.1.7501.1.2.114.3.1.1.2 | ColumnbesConfigConfigurationIndex | read-write | mandatory | Index of the active configuration (1..besDisplayNumberOfConfigs) |
| 1.3.6.1.4.1.7501.1.2.114.3.1.1.3 | ColumnbesConfigConfiguration | read-only | mandatory | Description of the active configuration |
| 1.3.6.1.4.1.7501.1.2.114.4 | NodebesControl | |||
| 1.3.6.1.4.1.7501.1.2.114.4.1 | TablebesControlTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.114.4.1.1 | RowbesControlEntry | not-accessible | mandatory | Alarms for a module. |
| 1.3.6.1.4.1.7501.1.2.114.4.1.1.1 | ColumnbesControlReset | read-write | mandatory | Reset the module. |
| 1.3.6.1.4.1.7501.1.2.114.4.1.1.2 | ColumnbesControlModuleLedBlink | read-write | mandatory | Writing this variable to true(1) lets the device's modul LED blink green for 10 seconds. Writing this variable to false(2) stbes blinking at once. This variabl… |
| 1.3.6.1.4.1.7501.1.2.114.5 | NodebesMeasuringValues | |||
| 1.3.6.1.4.1.7501.1.2.114.5.1 | TablebesMeasuringValuesTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.114.5.1.1 | RowbesMeasuringValuesEntry | not-accessible | mandatory | Common-Values for a module. |
| 1.3.6.1.4.1.7501.1.2.114.5.1.1.1 | ColumnbesTemperatureLoLo | read-only | mandatory | Device temperature low alarm threshold in 0.1 celsius degrees. |
| 1.3.6.1.4.1.7501.1.2.114.5.1.1.2 | ColumnbesTemperatureLo | read-only | mandatory | Device temperature low warning threshold in 0.1 celsius degrees. |
| 1.3.6.1.4.1.7501.1.2.114.5.1.1.3 | ColumnbesTemperatureValue | read-only | mandatory | Device temperature in 0.1 celsius degrees. |
| 1.3.6.1.4.1.7501.1.2.114.5.1.1.4 | ColumnbesTemperatureHi | read-only | mandatory | Device temperature high warning threshold in 0.1 celsius degrees. |
| 1.3.6.1.4.1.7501.1.2.114.5.1.1.5 | ColumnbesTemperatureHiHi | read-only | mandatory | Device temperature high alarm threshold in 0.1 celsius degrees. |
| 1.3.6.1.4.1.7501.1.2.114.5.1.1.6 | ColumnbesInputVoltageLoLo | read-only | mandatory | The input supply voltage low alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.114.5.1.1.7 | ColumnbesInputVoltageLo | read-only | mandatory | The input supply voltage low warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.114.5.1.1.8 | ColumnbesInputVoltageValue | read-only | mandatory | The input supply voltage in steps of 0.1 Volts. Input supply voltage nominal value, see 'besDisplayInputVoltageNominal' |
| 1.3.6.1.4.1.7501.1.2.114.5.1.1.9 | ColumnbesInputVoltageHi | read-only | mandatory | The input supply voltage high warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.114.5.1.1.10 | ColumnbesInputVoltageHiHi | read-only | mandatory | The input supply voltage high alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.114.6 | NodebesDisplay | |||
| 1.3.6.1.4.1.7501.1.2.114.6.1 | TablebesDisplayTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1 | RowbesDisplayEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1.1 | ColumnbesDisplayNumberOfPorts | read-only | mandatory | The number of ports |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1.2 | ColumnbesDisplayInputVoltageNominal | read-only | mandatory | The nominal value of input voltage in 0.1 V units. |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1.3 | ColumnbesDisplayNumberOfConfigs | read-only | mandatory | The number of different configurations supplied |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1.4 | ColumnbesDisplayConfiguration1 | read-only | mandatory | Description of configuration no. #1 |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1.5 | ColumnbesDisplayConfiguration2 | read-only | mandatory | Description of configuration no. #2 |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1.6 | ColumnbesDisplayConfiguration3 | read-only | mandatory | Description of configuration no. #3 |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1.7 | ColumnbesDisplayConfiguration4 | read-only | mandatory | Description of configuration no. #4 |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1.8 | ColumnbesDisplayConfiguration5 | read-only | mandatory | Description of configuration no. #5 |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1.9 | ColumnbesDisplayConfiguration6 | read-only | mandatory | Description of configuration no. #6 |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1.10 | ColumnbesDisplayConfiguration7 | read-only | mandatory | Description of configuration no. #7 |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1.11 | ColumnbesDisplayConfiguration8 | read-only | mandatory | Description of configuration no. #8 |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1.12 | ColumnbesDisplayConfiguration9 | read-only | mandatory | Description of configuration no. #9 |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1.13 | ColumnbesDisplayConfiguration10 | read-only | mandatory | Description of configuration no. #10 |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1.14 | ColumnbesDisplayConfiguration11 | read-only | mandatory | Description of configuration no. #11 |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1.15 | ColumnbesDisplayConfiguration12 | read-only | mandatory | Description of configuration no. #12 |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1.16 | ColumnbesDisplayConfiguration13 | read-only | mandatory | Description of configuration no. #13 |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1.17 | ColumnbesDisplayConfiguration14 | read-only | mandatory | Description of configuration no. #14 |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1.18 | ColumnbesDisplayConfiguration15 | read-only | mandatory | Description of configuration no. #15 |
| 1.3.6.1.4.1.7501.1.2.114.6.1.1.19 | ColumnbesDisplayConfiguration16 | read-only | mandatory | Description of configuration no. #16 |
| 1.3.6.1.4.1.7501.1.2.114.56 | NodebesDisplayPorts | |||
| 1.3.6.1.4.1.7501.1.2.114.56.1 | TablebesDisplayPortsTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.114.56.1.1 | RowbesDisplayPortsEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.114.56.1.1.1 | ColumnbesDisplayPortsPortIndex | read-only | mandatory | Port index (1..besDisplayNumberOfPorts) |
| 1.3.6.1.4.1.7501.1.2.114.56.1.1.2 | ColumnbesDisplayPortsPortName | read-only | mandatory | Port name |
| 1.3.6.1.4.1.7501.1.2.114.56.1.1.3 | ColumnbesDisplayPortsType | read-only | mandatory | Port type |
| 1.3.6.1.4.1.7501.1.2.114.56.1.1.4 | ColumnbesDisplayPortsLinkState | read-only | mandatory | Port link status |
| 1.3.6.1.4.1.7501.1.2.114.56.1.1.5 | ColumnbesDisplayPortsStatus | read-only | mandatory | Port status |
| 1.3.6.1.4.1.7501.1.2.114.56.1.1.6 | ColumnbesDisplayPortsDuplexMode | read-only | mandatory | Port duplex mode |
| 1.3.6.1.4.1.7501.1.2.114.56.1.1.7 | ColumnbesDisplayPortsSpeed | read-only | mandatory | Port speed |
| 1.3.6.1.4.1.7501.1.2.114.56.1.1.8 | ColumnbesDisplayPortsFlowControl | read-only | mandatory | Port speed |
| 1.3.6.1.4.1.7501.1.2.114.56.1.1.9 | ColumnbesDisplayPortsFiberTxDistance | read-only | mandatory | Port transmission distance in units of km (Fiber ports only) |
| 1.3.6.1.4.1.7501.1.2.114.56.1.1.10 | ColumnbesDisplayPortsFiberTxWavelen | read-only | mandatory | Port transmission wavelength in units of nm (Fiber ports only) |
| 1.3.6.1.4.1.7501.1.2.114.56.1.1.11 | ColumnbesDisplayPortsFiberRxWavelenMin | read-only | mandatory | Port minimum receive wavelength in units of nm (Fiber ports only) |
| 1.3.6.1.4.1.7501.1.2.114.56.1.1.12 | ColumnbesDisplayPortsFiberRxWavelenMax | read-only | mandatory | Port maximum receive wavelength in units of nm (Fiber ports only) |
| 1.3.6.1.4.1.7501.1.2.114.56.1.1.13 | ColumnbesDisplayPortsFiberSfpData | read-only | mandatory | Port SFP data text (Fiber ports only) |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| NESlotWriteValue | INTEGER (-1..99) | ||
| PortDuplexMode | INTEGER { duplexFull(1), duplexHalf(2) } | ||
| PortFlowControl | INTEGER { flowControlDisabled(1), flowControlEnabled(2) } | ||
| PortLinkState | INTEGER { linkDown(1), linkUp(2) } | ||
| PortSpeed | INTEGER { speedUnknown(0), speed10Mbps(10), speed100Mbps(100), speed1000Mbps(1000) } | ||
| PortStatus | INTEGER { statusUnknown(1), statusInit(2), statusValid(3), statusBusy(4), statusEmpty(5), statusInvalid(6), statusLossOfSignal(7) } | ||
| PortType | INTEGER { typeCopper(1), typeFiber(2) } |