BKTEL-HFC862-NECE-MIB
130 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7501.1.2.100 | Nodenece | |||
| 1.3.6.1.4.1.7501.1.2.100.1 | NodeneceCommon | |||
| 1.3.6.1.4.1.7501.1.2.100.1.1 | ScalarneceCommonNumberOfModules | read-only | mandatory | Number of modules in table. |
| 1.3.6.1.4.1.7501.1.2.100.1.2 | TableneceCommonTable | not-accessible | mandatory | The table contains all modules of the nece-type in the NE |
| 1.3.6.1.4.1.7501.1.2.100.1.2.1 | RowneceCommonEntry | not-accessible | mandatory | Common-Values for a module. |
| 1.3.6.1.4.1.7501.1.2.100.1.2.1.1 | ColumnneceNESlot | read-only | mandatory | The virtual slotID |
| 1.3.6.1.4.1.7501.1.2.100.1.2.1.2 | ColumnneceCommonType | read-only | mandatory | Module model name |
| 1.3.6.1.4.1.7501.1.2.100.1.2.1.3 | ColumnneceCommonDescr | read-write | mandatory | Module alias name |
| 1.3.6.1.4.1.7501.1.2.100.1.2.1.4 | ColumnneceCommonFirmwareId | read-only | mandatory | Module firmware version |
| 1.3.6.1.4.1.7501.1.2.100.1.2.1.5 | ColumnneceCommonModuleWidth | read-only | optional | The width of the module. |
| 1.3.6.1.4.1.7501.1.2.100.2 | NodeneceStates | |||
| 1.3.6.1.4.1.7501.1.2.100.2.1 | TableneceStatesTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.100.2.1.1 | RowneceStatesEntry | not-accessible | mandatory | Alarms for a module. |
| 1.3.6.1.4.1.7501.1.2.100.2.1.1.1 | ColumnneceStatesGpInput1 | read-only | mandatory | State of general purpose input no. 1. |
| 1.3.6.1.4.1.7501.1.2.100.2.1.1.2 | ColumnneceStatesGpInput2 | read-only | mandatory | State of general purpose input no. 2. |
| 1.3.6.1.4.1.7501.1.2.100.2.1.1.3 | ColumnneceStatesGpInput3 | read-only | mandatory | State of general purpose input no. 3. |
| 1.3.6.1.4.1.7501.1.2.100.2.1.1.4 | ColumnneceStatesGpInput4 | read-only | mandatory | State of general purpose input no. 4. |
| 1.3.6.1.4.1.7501.1.2.100.2.1.1.5 | ColumnneceStatesGpInput5 | read-only | mandatory | State of general purpose input no. 5. |
| 1.3.6.1.4.1.7501.1.2.100.2.1.1.6 | ColumnneceStatesGpInput6 | read-only | mandatory | State of general purpose input no. 6. |
| 1.3.6.1.4.1.7501.1.2.100.2.1.1.7 | ColumnneceStatesGpInput7 | read-only | mandatory | State of general purpose input no. 7. |
| 1.3.6.1.4.1.7501.1.2.100.2.1.1.8 | ColumnneceStatesGpInput8 | read-only | mandatory | State of general purpose input no. 8. |
| 1.3.6.1.4.1.7501.1.2.100.2.1.1.9 | ColumnneceStatesGpInput9 | read-only | mandatory | State of general purpose input no. 9. |
| 1.3.6.1.4.1.7501.1.2.100.2.1.1.10 | ColumnneceStatesGpInput10 | read-only | mandatory | State of general purpose input no. 10. |
| 1.3.6.1.4.1.7501.1.2.100.2.1.1.11 | ColumnneceStatesGpInput11 | read-only | mandatory | State of general purpose input no. 11. |
| 1.3.6.1.4.1.7501.1.2.100.2.1.1.12 | ColumnneceStatesGpInput12 | read-only | mandatory | State of general purpose input no. 12. |
| 1.3.6.1.4.1.7501.1.2.100.2.1.1.13 | ColumnneceStatesPowerSupplyLeft | read-only | mandatory | The left (looking from front side) power supply unit fails. Only valid for 2G6 Systems !! Non 2G6 Systems always report clear(5) |
| 1.3.6.1.4.1.7501.1.2.100.2.1.1.14 | ColumnneceStatesPowerSupplyRight | read-only | mandatory | The right (looking from front side) power supply unit fails. Only valid for 2G6 Systems !! Non 2G6 Systems always report clear(5) |
| 1.3.6.1.4.1.7501.1.2.100.2.1.1.15 | ColumnneceStatesFanLeft | read-only | mandatory | The left (looking from front side) fan unit fails. Only valid for 2G6 Systems !! Non 2G6 Systems always report clear(5) |
| 1.3.6.1.4.1.7501.1.2.100.2.1.1.16 | ColumnneceStatesFanRight | read-only | mandatory | The right (looking from front side) fan unit fails. Only valid for 2G6 Systems !! Non 2G6 Systems always report clear(5) |
| 1.3.6.1.4.1.7501.1.2.100.3 | NodeneceConfiguration | |||
| 1.3.6.1.4.1.7501.1.2.100.3.1 | TableneceConfigurationTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1 | RowneceConfigurationEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.1 | ColumnneceConfigGpio1Type | read-only | mandatory | The type of the general purpose port no. 1 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.2 | ColumnneceConfigGpio1Mode | read-write | mandatory | The mode of the general purpose port no. 1 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.3 | ColumnneceConfigGpio1LogicLevel | read-write | mandatory | The logic level of the general purpose port no. 1 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.4 | ColumnneceConfigGpio1Description | read-write | mandatory | A description for the general purpose port no. 1 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.5 | ColumnneceConfigGpio2Type | read-only | mandatory | The type of the general purpose port no. 2 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.6 | ColumnneceConfigGpio2Mode | read-write | mandatory | The mode of the general purpose port no. 2 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.7 | ColumnneceConfigGpio2LogicLevel | read-write | mandatory | The logic level of the general purpose port no. 2 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.8 | ColumnneceConfigGpio2Description | read-write | mandatory | A description for the general purpose port no. 2 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.9 | ColumnneceConfigGpio3Type | read-only | mandatory | The type of the general purpose port no. 3 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.10 | ColumnneceConfigGpio3Mode | read-write | mandatory | The mode of the general purpose port no. 3 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.11 | ColumnneceConfigGpio3LogicLevel | read-write | mandatory | The logic level of the general purpose port no. 3 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.12 | ColumnneceConfigGpio3Description | read-write | mandatory | A description for the general purpose port no. 3 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.13 | ColumnneceConfigGpio4Type | read-only | mandatory | The type of the general purpose port no. 4 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.14 | ColumnneceConfigGpio4Mode | read-write | mandatory | The mode of the general purpose port no. 4 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.15 | ColumnneceConfigGpio4LogicLevel | read-write | mandatory | The logic level of the general purpose port no. 4 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.16 | ColumnneceConfigGpio4Description | read-write | mandatory | A description for the general purpose port no. 4 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.17 | ColumnneceConfigGpio5Type | read-only | mandatory | The type of the general purpose port no. 5 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.18 | ColumnneceConfigGpio5Mode | read-write | mandatory | The mode of the general purpose port no. 5 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.19 | ColumnneceConfigGpio5LogicLevel | read-write | mandatory | The logic level of the general purpose port no. 5 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.20 | ColumnneceConfigGpio5Description | read-write | mandatory | A description for the general purpose port no. 5 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.21 | ColumnneceConfigGpio6Type | read-only | mandatory | The type of the general purpose port no. 6 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.22 | ColumnneceConfigGpio6Mode | read-write | mandatory | The mode of the general purpose port no. 6 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.23 | ColumnneceConfigGpio6LogicLevel | read-write | mandatory | The logic level of the general purpose port no. 6 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.24 | ColumnneceConfigGpio6Description | read-write | mandatory | A description for the general purpose port no. 6 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.25 | ColumnneceConfigGpio7Type | read-only | mandatory | The type of the general purpose port no. 7 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.26 | ColumnneceConfigGpio7Mode | read-write | mandatory | The mode of the general purpose port no. 7 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.27 | ColumnneceConfigGpio7LogicLevel | read-write | mandatory | The logic level of the general purpose port no. 7 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.28 | ColumnneceConfigGpio7Description | read-write | mandatory | A description for the general purpose port no. 7 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.29 | ColumnneceConfigGpio8Type | read-only | mandatory | The type of the general purpose port no. 8 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.30 | ColumnneceConfigGpio8Mode | read-write | mandatory | The mode of the general purpose port no. 8 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.31 | ColumnneceConfigGpio8LogicLevel | read-write | mandatory | The logic level of the general purpose port no. 8 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.32 | ColumnneceConfigGpio8Description | read-write | mandatory | A description for the general purpose port no. 8 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.33 | ColumnneceConfigGpio9Type | read-only | mandatory | The type of the general purpose port no. 9 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.34 | ColumnneceConfigGpio9Mode | read-write | mandatory | The mode of the general purpose port no. 9 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.35 | ColumnneceConfigGpio9LogicLevel | read-write | mandatory | The logic level of the general purpose port no. 9 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.36 | ColumnneceConfigGpio9Description | read-write | mandatory | A description for the general purpose port no. 9 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.37 | ColumnneceConfigGpio10Type | read-only | mandatory | The type of the general purpose port no. 10 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.38 | ColumnneceConfigGpio10Mode | read-write | mandatory | The mode of the general purpose port no. 10 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.39 | ColumnneceConfigGpio10LogicLevel | read-write | mandatory | The logic level of the general purpose port no. 10 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.40 | ColumnneceConfigGpio10Description | read-write | mandatory | A description for the general purpose port no. 10 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.41 | ColumnneceConfigGpio11Type | read-only | mandatory | The type of the general purpose port no. 11 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.42 | ColumnneceConfigGpio11Mode | read-write | mandatory | The mode of the general purpose port no. 11 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.43 | ColumnneceConfigGpio11LogicLevel | read-write | mandatory | The logic level of the general purpose port no. 11 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.44 | ColumnneceConfigGpio11Description | read-write | mandatory | A description for the general purpose port no. 11 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.45 | ColumnneceConfigGpio12Type | read-only | mandatory | The type of the general purpose port no. 12 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.46 | ColumnneceConfigGpio12Mode | read-write | mandatory | The mode of the general purpose port no. 12 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.47 | ColumnneceConfigGpio12LogicLevel | read-write | mandatory | The logic level of the general purpose port no. 12 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.48 | ColumnneceConfigGpio12Description | read-write | mandatory | A description for the general purpose port no. 12 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.49 | ColumnneceConfigNESlotWrite | read-write | optional | By writing this variable a slot can be assigned for devices that dont support hardware slot detection. Reading '-1' means that the slot position is NOT writabl… |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.50 | ColumnneceConfigIpAddress | read-write | mandatory | The ip address of the NEC. NOTE: The NECE executes a reset if this parameter gets changed |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.51 | ColumnneceConfigNetmask | read-write | mandatory | The netmask of the NEC. NOTE: The NECE executes a reset if this parameter gets changed |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.52 | ColumnneceConfigDefaultrouter | read-write | mandatory | The default router of the NEC. NOTE: The NECE executes a reset if this parameter gets changed |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.53 | ColumnneceConfigTrapReceiver1HostIp | read-write | mandatory | The ip address of the host no.1 that should receive traps Address 0.0.0.0 disables the trap. Broad- or multicast addresses are not allowed |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.54 | ColumnneceConfigTrapReceiver1Community | read-write | mandatory | The community name used for traps to host no.1 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.55 | ColumnneceConfigTrapReceiver2HostIp | read-write | mandatory | The ip address of the host no.2 that should receive traps Address 0.0.0.0 disables the trap. Broad- or multicast addresses are not allowed |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.56 | ColumnneceConfigTrapReceiver2to4Community | read-write | mandatory | The community name used for traps to hosts no.2 to no.4 |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.57 | ColumnneceConfigTrapReceiver3HostIp | read-write | mandatory | The ip address of the host no.3 that should receive traps Address 0.0.0.0 disables the trap. Broad- or multicast addresses are not allowed NOTE: The community … |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.58 | ColumnneceConfigTrapReceiver4HostIp | read-write | mandatory | The ip address of the host no.4 that should receive traps Address 0.0.0.0 disables the trap. Broad- or multicast addresses are not allowed NOTE: The community … |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.59 | ColumnneceConfigGetCommunity | read-write | mandatory | The community name that is allowed for GET requests NOTES: - By writing 'neceConfigGetCommunity' AND 'neceConfigSetCommunity' to an empty string of size 0, the… |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.60 | ColumnneceConfigSetCommunity | read-write | mandatory | The community name that is allowed for SET and GET requests NOTES: - By writing 'neceConfigGetCommunity' AND 'neceConfigSetCommunity' to an empty string of siz… |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.61 | ColumnneceConfigTrapReceiverVerify | read-write | mandatory | If TRUE, the NECE verifies if the 'sysDescr' variable is readable on host with ip-address 'neceConfigTrapVerifyReceiverIp' before sending new traps. NOTE: The … |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.62 | ColumnneceConfigTrapVerifyReceiverIp | read-write | mandatory | The ip address of the host that should receive the 'sysDescr' verify request. Broad- or multicast addresses are not allowed. !!! Only valid if neceConfigTrapRe… |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.63 | ColumnneceConfigTrapVerifyTimeout | read-write | mandatory | Timeout in seconds after which the NECE stops trying to verify 'sysDescr'. All pending traps are sent, although no verify response, after that timeout. !!! Onl… |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.64 | ColumnneceConfigTrapAccumulationTime | read-write | mandatory | Time in seconds that the NECE waits before sending all pending traps. NOTE: There are two condition where the NECE sends its pending traps earlier ignoring thi… |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.65 | ColumnneceConfigCableWatchUsed | read-write | mandatory | This parameter is obsolete and no more needed, always returns false(2) |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.66 | ColumnneceConfigHmsTrapsCompliance | read-write | mandatory | Set the compliance mode of the SCTE HMS traps In earlier versions of NECE (<= Sw.Rel. 1.10) the trap compliance to the SCTE HMS MIBs was not fully given. See m… |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.67 | ColumnneceConfigHmsNotificationsEnable | read-write | mandatory | With this control the user can disable all traps of type NOTIFY and there entries in the SCTE HMS tree. NOTE: The NECE executes a reset if this parameter gets … |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.68 | ColumnneceConfigHfcInventoryFormat | read-only | mandatory | Selects the supported format of the hfcInventoryFabricData (T-NOVA-HFC-INVENTORY-MIB) |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.69 | ColumnneceConfigTimezone | read-write | mandatory | The timezone in units of half hours from GMT (Greenwich Mean Time). For example: Berlin => +2 half hours means GMT+1 hour Tokio => +18 half hours means GMT+9 h… |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.70 | ColumnneceConfigNtpServerIp | read-write | mandatory | The ip address of an NTP time server. Setting the ip to 0.0.0.0 disables the time server lookup. NOTE: Not all NECE's support an NTP server. |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.71 | ColumnneceConfigFactoryCommandLine | read-write | mandatory | A factory internal command interface |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.72 | ColumnneceConfigDaylightSavingFrom | read-write | mandatory | Daylight saving start time in a special textformat (see manual for detail) |
| 1.3.6.1.4.1.7501.1.2.100.3.1.1.73 | ColumnneceConfigDaylightSavingTo | read-write | mandatory | Daylight saving end time in a special textformat (see manual for detail) |
| 1.3.6.1.4.1.7501.1.2.100.4 | NodeneceControl | |||
| 1.3.6.1.4.1.7501.1.2.100.4.1 | TableneceControlTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.100.4.1.1 | RowneceControlEntry | not-accessible | mandatory | Alarms for a module. |
| 1.3.6.1.4.1.7501.1.2.100.4.1.1.1 | ColumnneceControlReset | read-write | mandatory | Reset the module. |
| 1.3.6.1.4.1.7501.1.2.100.5 | NodeneceMeasuringValues | |||
| 1.3.6.1.4.1.7501.1.2.100.5.1 | TableneceMeasuringValuesTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.100.5.1.1 | RowneceMeasuringValuesEntry | not-accessible | mandatory | Common-Values for a module. |
| 1.3.6.1.4.1.7501.1.2.100.5.1.1.1 | ColumnneceTemperatureLoLo | read-only | mandatory | Temperature low alarm threshold in steps of 0,1�C. |
| 1.3.6.1.4.1.7501.1.2.100.5.1.1.2 | ColumnneceTemperatureLo | read-only | mandatory | Temperature low warning threshold in steps of 0,1�C. |
| 1.3.6.1.4.1.7501.1.2.100.5.1.1.3 | ColumnneceTemperatureValue | read-only | mandatory | Temperature in steps of 0,1�C. |
| 1.3.6.1.4.1.7501.1.2.100.5.1.1.4 | ColumnneceTemperatureHi | read-only | mandatory | Temperature high warning threshold in steps of 0,1�C. |
| 1.3.6.1.4.1.7501.1.2.100.5.1.1.5 | ColumnneceTemperatureHiHi | read-only | mandatory | Temperature high alarm threshold in steps of 0,1�C. |
| 1.3.6.1.4.1.7501.1.2.100.6 | NodeneceDisplay | |||
| 1.3.6.1.4.1.7501.1.2.100.6.1 | TableneceDisplayTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.100.6.1.1 | RowneceDisplayEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.100.6.1.1.1 | ColumnneceDisplayTrapsSent | read-only | mandatory | Number of traps that the NECE has sent. |
| 1.3.6.1.4.1.7501.1.2.100.6.1.1.2 | ColumnneceDisplayTrapsDiscarded | read-only | mandatory | Number of traps that the NECE has discarded. Discarded traps occur because of trap buffer overflow or timeouts. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| GpioLogicLevel | INTEGER { gpioLevelActiveHigh(1), gpioLevelActiveLow(2) } | ||
| GpioMode | INTEGER { gpioModeInput(1), gpioModeInputIsNotify(2), gpioModeInputIsWarning(3), gpioModeInputIsAlarm(4), gpioModeOutputOnAnyAlarm(5), gpioModeOutputOnAnyWarning(6) } | ||
| GpioType | INTEGER { gpioTypeNotSupported(1), gpioTypeInputOnly(2), gpioTypeInputOrOutput(3), gpioTypeOutputOnly(4) } | ||
| HfcInventoryFormatValue | INTEGER { format_DKS_T12_9(1), format_T_Nova_E531i(2) } | ||
| HmsTrapsComplianceValue | INTEGER { fullCompliant(1), minorCompliant(2) } | ||
| NESlotWriteValue | INTEGER (-1..99) | ||
| TrapAccumulationTimeValue | INTEGER (0..60) | ||
| TrapVerifyTimeoutValue | INTEGER (30..600) |