BKTEL-HFC862-OA-V01-MIB
267 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7501.1.2.116 | Nodeoa | |||
| 1.3.6.1.4.1.7501.1.2.116.1 | NodeoaCommon | |||
| 1.3.6.1.4.1.7501.1.2.116.1.1 | ScalaroaCommonNumberOfModules | read-only | mandatory | Number of modules in table. |
| 1.3.6.1.4.1.7501.1.2.116.1.2 | TableoaCommonTable | not-accessible | mandatory | The table contains all modules of the OA-type in the NE |
| 1.3.6.1.4.1.7501.1.2.116.1.2.1 | RowoaCommonEntry | not-accessible | mandatory | Common-Values for a module. |
| 1.3.6.1.4.1.7501.1.2.116.1.2.1.1 | ColumnoaNESlot | read-only | mandatory | The slot number of the chassis for which this entry contains management information. |
| 1.3.6.1.4.1.7501.1.2.116.1.2.1.2 | ColumnoaCommonType | read-only | mandatory | The type of physical module. modSlotEmpty indicates an empty slot. A Value of modSlotUnknown indicates that the type of module is unknown. |
| 1.3.6.1.4.1.7501.1.2.116.1.2.1.3 | ColumnoaCommonDescr | read-write | mandatory | A textual description of the module. If not available, this Value should be set to a zero length string. |
| 1.3.6.1.4.1.7501.1.2.116.1.2.1.4 | ColumnoaCommonFirmwareId | read-only | mandatory | The firmware Id of the module. |
| 1.3.6.1.4.1.7501.1.2.116.1.2.1.5 | ColumnoaCommonModuleWidth | read-only | optional | The width of the module in multiples of slots (1, 2, ...) |
| 1.3.6.1.4.1.7501.1.2.116.2 | NodeoaStates | |||
| 1.3.6.1.4.1.7501.1.2.116.2.1 | TableoaStatesTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1 | RowoaStatesEntry | not-accessible | mandatory | Alarms for a module. |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.1 | ColumnoaStatesBootloader | read-only | mandatory | The device is running in bootloader mode without a legal application software. |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.2 | ColumnoaStatesCommLoss | read-only | mandatory | The NEC has lost the connection to the device. Reason may be a removed or defective device. Note that this state is set by the NEC and not by the device |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.3 | ColumnoaStatesInitializing | read-only | mandatory | The device is initializing |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.4 | ColumnoaStatesLaserShutdown | read-only | mandatory | Lasers are shutdown, no optical output |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.5 | ColumnoaStatesTemperatureLow | read-only | mandatory | Device internal temperature low |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.6 | ColumnoaStatesTemperatureHigh | read-only | mandatory | Device internal temperature high |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.7 | ColumnoaStatesSystem | read-only | mandatory | Internal error occured |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.8 | ColumnoaStatesInputPwrLow | read-only | mandatory | Optical input power low |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.9 | ColumnoaStatesInputPwrHigh | read-only | mandatory | Optical input power high |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.10 | ColumnoaStatesOutputPwrOrGainLow | read-only | mandatory | Optical output power (or gain) low |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.11 | ColumnoaStatesOutputPwrOrGainHigh | read-only | mandatory | Optical output power (or gain) high |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.12 | ColumnoaStatesReturnLossLow | read-only | mandatory | Return loss low |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.13 | ColumnoaStatesReturnLossHigh | read-only | mandatory | Return loss high |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.14 | ColumnoaStatesRedundancySwitch | read-only | mandatory | This (redundant) device has been activated (redundancy switchover) |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.15 | ColumnoaStatesInputVoltageLow | read-only | mandatory | Input supply voltage low |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.16 | ColumnoaStatesInputVoltageHigh | read-only | mandatory | Input supply voltage high |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.25 | ColumnoaStatesPowerSupplyLeft | read-only | mandatory | The left (looking from front) power supply unit fails. Only valid for devices in 19 inch housing |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.26 | ColumnoaStatesPowerSupplyRight | read-only | mandatory | The right (looking from front) power supply unit fails. Only valid for devices in 19 inch housing |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.27 | ColumnoaStatesFanLeft | read-only | mandatory | The left (looking from front) fan unit fails. Only valid for devices in 19 inch housing |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.28 | ColumnoaStatesFanRight | read-only | mandatory | The right (looking from front) fan unit fails. Only valid for devices in 19 inch housing |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.29 | ColumnoaStatesInternalVoltageLow | read-only | mandatory | One (or more) internal voltages low |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.30 | ColumnoaStatesInternalVoltageHigh | read-only | mandatory | One (or more) internal voltages high |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.31 | ColumnoaStatesLaserCurrentLow | read-only | mandatory | Laser current of one (or more) lasers low |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.32 | ColumnoaStatesLaserCurrentHigh | read-only | mandatory | Laser current of one (or more) lasers high (laser is aging) |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.33 | ColumnoaStatesTecCurrentLow | read-only | mandatory | Laser TEC current limit of one (or more) lasers reached (heating limit) |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.34 | ColumnoaStatesTecCurrentHigh | read-only | mandatory | Laser TEC current limit of one (or more) lasers reached (cooling limit) |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.35 | ColumnoaStatesLaserTempLow | read-only | mandatory | Laser temperature of one (or more) lasers low |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.36 | ColumnoaStatesLaserTempHigh | read-only | mandatory | Laser temperature of one (or more) lasers high |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.37 | ColumnoaStatesLaserVoltageLow | read-only | mandatory | Laser voltage supply of one (or more) lasers low |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.38 | ColumnoaStatesLaserVoltageHigh | read-only | mandatory | Laser voltage supply of one (or more) lasers high |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.39 | ColumnoaStatesRamanBackReflectionRatio | read-only | mandatory | Raman amplifier back reflection ratio high alarm Only used if oaDisplayAmplifierIsRamanType == true(1) |
| 1.3.6.1.4.1.7501.1.2.116.2.1.1.40 | ColumnoaStatesRamanOscSignalMissing | read-only | mandatory | Raman amplifier oscillator signal missing alarm Only used if oaDisplayAmplifierIsRamanType == true(1) |
| 1.3.6.1.4.1.7501.1.2.116.3 | NodeoaConfiguration | |||
| 1.3.6.1.4.1.7501.1.2.116.3.1 | TableoaConfigurationTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.116.3.1.1 | RowoaConfigurationEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.116.3.1.1.1 | ColumnoaConfigNESlotWrite | read-write | optional | By writing this variable a slot can be assigned for devices that dont support hardware slot detection. Reading '-1' means that the slot position is NOT writabl… |
| 1.3.6.1.4.1.7501.1.2.116.3.1.1.2 | ColumnoaConfigRegulationMode | read-write | mandatory | The regulation mode of the device. - regModeConstantOutputPower(1): If the device runs in constant output power mode, then all *OutputPwrOrGain* variables are … |
| 1.3.6.1.4.1.7501.1.2.116.3.1.1.3 | ColumnoaConfigOutputPwrOrGainAdjust | read-write | mandatory | This variable can be used to adjust the desired output power (or gain) value in 0.1 dB units relative to its nominal level. See oaConfigRegulationMode variable… |
| 1.3.6.1.4.1.7501.1.2.116.3.1.1.4 | ColumnoaConfigModeExtIO | read-write | mandatory | The mode and usage of the device's external IO port. |
| 1.3.6.1.4.1.7501.1.2.116.3.1.1.5 | ColumnoaConfigMaskExtIO | read-write | mandatory | The alarm/warning mask that activates the device's external IO port. |
| 1.3.6.1.4.1.7501.1.2.116.3.1.1.6 | ColumnoaConfigSbsEvaluationMode | read-write | mandatory | The SBS threshold evaluation mode. |
| 1.3.6.1.4.1.7501.1.2.116.4 | NodeoaControl | |||
| 1.3.6.1.4.1.7501.1.2.116.4.1 | TableoaControlTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.116.4.1.1 | RowoaControlEntry | not-accessible | mandatory | Alarms for a module. |
| 1.3.6.1.4.1.7501.1.2.116.4.1.1.1 | ColumnoaControlLaserShutdown | read-write | mandatory | Shutdown the laser(s), optical power on/off. |
| 1.3.6.1.4.1.7501.1.2.116.4.1.1.2 | ColumnoaControlReset | read-write | mandatory | Reset the module. |
| 1.3.6.1.4.1.7501.1.2.116.4.1.1.3 | ColumnoaControlModuleLedBlink | read-write | mandatory | Writing this variable to true(1) lets the device's modul LED blink green for 10 seconds. Writing this variable to false(2) stops blinking at once. This variabl… |
| 1.3.6.1.4.1.7501.1.2.116.4.1.1.4 | ColumnoaControlSbsEvaluationStart | read-write | mandatory | Setting to true(1) starts an SBS threshold evaluation process. Always reads as false(2) |
| 1.3.6.1.4.1.7501.1.2.116.5 | NodeoaMeasuringValues | |||
| 1.3.6.1.4.1.7501.1.2.116.5.1 | TableoaMeasuringValuesTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1 | RowoaMeasuringValuesEntry | not-accessible | mandatory | Common-Values for a module. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.1 | ColumnoaTemperatureLoLo | read-only | mandatory | The module temperature low alarm threshold in steps of 0.1 celsius degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.2 | ColumnoaTemperatureLo | read-only | mandatory | The module temperature low warning threshold in steps of 0.1 celsius degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.3 | ColumnoaTemperatureValue | read-only | mandatory | The module temperature in steps of 0.1 celsius degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.4 | ColumnoaTemperatureHi | read-only | mandatory | The module temperature high warning threshold in steps of 0.1 celsius degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.5 | ColumnoaTemperatureHiHi | read-only | mandatory | The module temperature high alarm threshold in steps of 0.1 celsius degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.6 | ColumnoaInputPowerLoLo | read-write | mandatory | Input power low alarm threshold in steps of 0.1dBm. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.7 | ColumnoaInputPowerLo | read-write | mandatory | Input power low warning threshold in steps of 0.1dBm. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.8 | ColumnoaInputPowerValue | read-only | mandatory | Input power in steps of 0.1dBm. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.9 | ColumnoaInputPowerHi | read-write | mandatory | Input power high warning threshold in steps of 0.1dBm. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.10 | ColumnoaInputPowerHiHi | read-write | mandatory | Input power high alarm threshold in steps of 0.1dBm. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.11 | ColumnoaOutputPwrOrGainLoLo | read-write | mandatory | Output power (or gain) low alarm threshold in steps of 0.1dB(m). See oaConfigRegulationMode variable too |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.12 | ColumnoaOutputPwrOrGainLo | read-write | mandatory | Output power (or gain) low warning threshold in steps of 0.1dB(m). See oaConfigRegulationMode variable too |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.13 | ColumnoaOutputPwrOrGainValue | read-only | mandatory | Output power (or gain) in steps of 0.1dB(m). See oaConfigRegulationMode variable too |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.14 | ColumnoaOutputPwrOrGainHi | read-write | mandatory | Output power (or gain) high warning threshold in steps of 0.1dB(m). See oaConfigRegulationMode variable too |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.15 | ColumnoaOutputPwrOrGainHiHi | read-write | mandatory | Output power (or gain) high alarm threshold in steps of 0.1dB(m). See oaConfigRegulationMode variable too |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.16 | ColumnoaReturnLossLoLo | read-write | mandatory | ReturnLoss low alarm threshold in steps of 0.1 dB. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.17 | ColumnoaReturnLossLo | read-write | mandatory | ReturnLoss low warning threshold in steps of 0.1 dB. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.18 | ColumnoaReturnLossValue | read-only | mandatory | ReturnLoss in steps of 0.1 dB. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.19 | ColumnoaReturnLossHi | read-write | mandatory | ReturnLoss high warning threshold in steps of 0.1 dB. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.20 | ColumnoaReturnLossHiHi | read-write | mandatory | ReturnLoss high alarm threshold in steps of 0.1 dB. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.21 | ColumnoaInputVoltageLoLo | read-only | mandatory | The input supply voltage low alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.22 | ColumnoaInputVoltageLo | read-only | mandatory | The input supply voltage low warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.23 | ColumnoaInputVoltageValue | read-only | mandatory | The input supply voltage in steps of 0.1 Volts. Input supply voltage nominal value, see 'oaDisplayInputVoltageNominal' |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.24 | ColumnoaInputVoltageHi | read-only | mandatory | The input supply voltage high warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.25 | ColumnoaInputVoltageHiHi | read-only | mandatory | The input supply voltage high alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.46 | ColumnoaInternalVoltage1LoLo | read-only | optional | The internal voltage low alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.47 | ColumnoaInternalVoltage1Lo | read-only | optional | The internal voltage low warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.48 | ColumnoaInternalVoltage1Value | read-only | optional | The internal voltage in steps of 0.1 Volts. Internal voltage nominal value, see 'oaDisplayInternalVoltage1Nominal' |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.49 | ColumnoaInternalVoltage1Hi | read-only | optional | The internal voltage high warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.50 | ColumnoaInternalVoltage1HiHi | read-only | optional | The internal voltage high alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.51 | ColumnoaInternalVoltage2LoLo | read-only | optional | The internal voltage low alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.52 | ColumnoaInternalVoltage2Lo | read-only | optional | The internal voltage low warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.53 | ColumnoaInternalVoltage2Value | read-only | optional | The internal voltage in steps of 0.1 Volts. Internal voltage nominal value, see 'oaDisplayInternalVoltage2Nominal' |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.54 | ColumnoaInternalVoltage2Hi | read-only | optional | The internal voltage high warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.55 | ColumnoaInternalVoltage2HiHi | read-only | optional | The internal voltage high alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.56 | ColumnoaInternalVoltage3LoLo | read-only | optional | The internal voltage low alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.57 | ColumnoaInternalVoltage3Lo | read-only | optional | The internal voltage low warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.58 | ColumnoaInternalVoltage3Value | read-only | optional | The internal voltage in steps of 0.1 Volts. Internal voltage nominal value, see 'oaDisplayInternalVoltage3Nominal' |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.59 | ColumnoaInternalVoltage3Hi | read-only | optional | The internal voltage high warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.60 | ColumnoaInternalVoltage3HiHi | read-only | optional | The internal voltage high alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.86 | ColumnoaLaser1CurrentRelLoLo | read-only | mandatory | Relative laser no.1 current low alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.87 | ColumnoaLaser1CurrentRelLo | read-only | mandatory | Relative laser no.1 current low warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.88 | ColumnoaLaser1CurrentRelValue | read-only | mandatory | The laser no.1 current relative to the current at begin of life in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.89 | ColumnoaLaser1CurrentRelHi | read-only | mandatory | Relative laser no.1 current high warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.90 | ColumnoaLaser1CurrentRelHiHi | read-only | mandatory | Relative laser no.1 current high alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.91 | ColumnoaLaser1TecRelLoLo | read-only | mandatory | Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.92 | ColumnoaLaser1TecRelLo | read-only | mandatory | Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.93 | ColumnoaLaser1TecRelValue | read-only | mandatory | The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.94 | ColumnoaLaser1TecRelHi | read-only | mandatory | Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.95 | ColumnoaLaser1TecRelHiHi | read-only | mandatory | Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.96 | ColumnoaLaser1TemperatureLoLo | read-only | mandatory | Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.97 | ColumnoaLaser1TemperatureLo | read-only | mandatory | Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.98 | ColumnoaLaser1TemperatureValue | read-only | mandatory | Temperature of laser no.1 in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.99 | ColumnoaLaser1TemperatureHi | read-only | mandatory | Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.100 | ColumnoaLaser1TemperatureHiHi | read-only | mandatory | Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.101 | ColumnoaLaser1VoltageLoLo | read-only | optional | The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.102 | ColumnoaLaser1VoltageLo | read-only | optional | The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.103 | ColumnoaLaser1VoltageValue | read-only | optional | The supply voltage of laser no.1 in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.104 | ColumnoaLaser1VoltageHi | read-only | optional | The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.105 | ColumnoaLaser1VoltageHiHi | read-only | optional | The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.111 | ColumnoaLaser2CurrentRelLoLo | read-only | mandatory | Relative laser no.1 current low alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.112 | ColumnoaLaser2CurrentRelLo | read-only | mandatory | Relative laser no.1 current low warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.113 | ColumnoaLaser2CurrentRelValue | read-only | mandatory | The laser no.1 current relative to the current at begin of life in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.114 | ColumnoaLaser2CurrentRelHi | read-only | mandatory | Relative laser no.1 current high warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.115 | ColumnoaLaser2CurrentRelHiHi | read-only | mandatory | Relative laser no.1 current high alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.116 | ColumnoaLaser2TecRelLoLo | read-only | mandatory | Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.117 | ColumnoaLaser2TecRelLo | read-only | mandatory | Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.118 | ColumnoaLaser2TecRelValue | read-only | mandatory | The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.119 | ColumnoaLaser2TecRelHi | read-only | mandatory | Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.120 | ColumnoaLaser2TecRelHiHi | read-only | mandatory | Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.121 | ColumnoaLaser2TemperatureLoLo | read-only | mandatory | Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.122 | ColumnoaLaser2TemperatureLo | read-only | mandatory | Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.123 | ColumnoaLaser2TemperatureValue | read-only | mandatory | Temperature of laser no.1 in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.124 | ColumnoaLaser2TemperatureHi | read-only | mandatory | Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.125 | ColumnoaLaser2TemperatureHiHi | read-only | mandatory | Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.126 | ColumnoaLaser2VoltageLoLo | read-only | optional | The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.127 | ColumnoaLaser2VoltageLo | read-only | optional | The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.128 | ColumnoaLaser2VoltageValue | read-only | optional | The supply voltage of laser no.1 in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.129 | ColumnoaLaser2VoltageHi | read-only | optional | The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.130 | ColumnoaLaser2VoltageHiHi | read-only | optional | The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.136 | ColumnoaLaser3CurrentRelLoLo | read-only | mandatory | Relative laser no.1 current low alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.137 | ColumnoaLaser3CurrentRelLo | read-only | mandatory | Relative laser no.1 current low warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.138 | ColumnoaLaser3CurrentRelValue | read-only | mandatory | The laser no.1 current relative to the current at begin of life in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.139 | ColumnoaLaser3CurrentRelHi | read-only | mandatory | Relative laser no.1 current high warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.140 | ColumnoaLaser3CurrentRelHiHi | read-only | mandatory | Relative laser no.1 current high alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.141 | ColumnoaLaser3TecRelLoLo | read-only | mandatory | Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.142 | ColumnoaLaser3TecRelLo | read-only | mandatory | Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.143 | ColumnoaLaser3TecRelValue | read-only | mandatory | The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.144 | ColumnoaLaser3TecRelHi | read-only | mandatory | Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.145 | ColumnoaLaser3TecRelHiHi | read-only | mandatory | Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.146 | ColumnoaLaser3TemperatureLoLo | read-only | mandatory | Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.147 | ColumnoaLaser3TemperatureLo | read-only | mandatory | Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.148 | ColumnoaLaser3TemperatureValue | read-only | mandatory | Temperature of laser no.1 in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.149 | ColumnoaLaser3TemperatureHi | read-only | mandatory | Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.150 | ColumnoaLaser3TemperatureHiHi | read-only | mandatory | Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.151 | ColumnoaLaser3VoltageLoLo | read-only | optional | The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.152 | ColumnoaLaser3VoltageLo | read-only | optional | The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.153 | ColumnoaLaser3VoltageValue | read-only | optional | The supply voltage of laser no.1 in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.154 | ColumnoaLaser3VoltageHi | read-only | optional | The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.155 | ColumnoaLaser3VoltageHiHi | read-only | optional | The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.161 | ColumnoaLaser4CurrentRelLoLo | read-only | mandatory | Relative laser no.1 current low alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.162 | ColumnoaLaser4CurrentRelLo | read-only | mandatory | Relative laser no.1 current low warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.163 | ColumnoaLaser4CurrentRelValue | read-only | mandatory | The laser no.1 current relative to the current at begin of life in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.164 | ColumnoaLaser4CurrentRelHi | read-only | mandatory | Relative laser no.1 current high warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.165 | ColumnoaLaser4CurrentRelHiHi | read-only | mandatory | Relative laser no.1 current high alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.166 | ColumnoaLaser4TecRelLoLo | read-only | mandatory | Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.167 | ColumnoaLaser4TecRelLo | read-only | mandatory | Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.168 | ColumnoaLaser4TecRelValue | read-only | mandatory | The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.169 | ColumnoaLaser4TecRelHi | read-only | mandatory | Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.170 | ColumnoaLaser4TecRelHiHi | read-only | mandatory | Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.171 | ColumnoaLaser4TemperatureLoLo | read-only | mandatory | Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.172 | ColumnoaLaser4TemperatureLo | read-only | mandatory | Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.173 | ColumnoaLaser4TemperatureValue | read-only | mandatory | Temperature of laser no.1 in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.174 | ColumnoaLaser4TemperatureHi | read-only | mandatory | Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.175 | ColumnoaLaser4TemperatureHiHi | read-only | mandatory | Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.176 | ColumnoaLaser4VoltageLoLo | read-only | optional | The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.177 | ColumnoaLaser4VoltageLo | read-only | optional | The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.178 | ColumnoaLaser4VoltageValue | read-only | optional | The supply voltage of laser no.1 in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.179 | ColumnoaLaser4VoltageHi | read-only | optional | The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.180 | ColumnoaLaser4VoltageHiHi | read-only | optional | The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.186 | ColumnoaLaser5CurrentRelLoLo | read-only | mandatory | Relative laser no.1 current low alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.187 | ColumnoaLaser5CurrentRelLo | read-only | mandatory | Relative laser no.1 current low warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.188 | ColumnoaLaser5CurrentRelValue | read-only | mandatory | The laser no.1 current relative to the current at begin of life in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.189 | ColumnoaLaser5CurrentRelHi | read-only | mandatory | Relative laser no.1 current high warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.190 | ColumnoaLaser5CurrentRelHiHi | read-only | mandatory | Relative laser no.1 current high alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.191 | ColumnoaLaser5TecRelLoLo | read-only | mandatory | Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.192 | ColumnoaLaser5TecRelLo | read-only | mandatory | Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.193 | ColumnoaLaser5TecRelValue | read-only | mandatory | The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.194 | ColumnoaLaser5TecRelHi | read-only | mandatory | Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.195 | ColumnoaLaser5TecRelHiHi | read-only | mandatory | Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.196 | ColumnoaLaser5TemperatureLoLo | read-only | mandatory | Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.197 | ColumnoaLaser5TemperatureLo | read-only | mandatory | Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.198 | ColumnoaLaser5TemperatureValue | read-only | mandatory | Temperature of laser no.1 in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.199 | ColumnoaLaser5TemperatureHi | read-only | mandatory | Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.200 | ColumnoaLaser5TemperatureHiHi | read-only | mandatory | Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.201 | ColumnoaLaser5VoltageLoLo | read-only | optional | The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.202 | ColumnoaLaser5VoltageLo | read-only | optional | The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.203 | ColumnoaLaser5VoltageValue | read-only | optional | The supply voltage of laser no.1 in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.204 | ColumnoaLaser5VoltageHi | read-only | optional | The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.205 | ColumnoaLaser5VoltageHiHi | read-only | optional | The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.211 | ColumnoaLaser6CurrentRelLoLo | read-only | mandatory | Relative laser no.1 current low alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.212 | ColumnoaLaser6CurrentRelLo | read-only | mandatory | Relative laser no.1 current low warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.213 | ColumnoaLaser6CurrentRelValue | read-only | mandatory | The laser no.1 current relative to the current at begin of life in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.214 | ColumnoaLaser6CurrentRelHi | read-only | mandatory | Relative laser no.1 current high warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.215 | ColumnoaLaser6CurrentRelHiHi | read-only | mandatory | Relative laser no.1 current high alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.216 | ColumnoaLaser6TecRelLoLo | read-only | mandatory | Thermo-electric-cooler current of laser no.1 low alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.217 | ColumnoaLaser6TecRelLo | read-only | mandatory | Thermo-electric-cooler current of laser no.1 low warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.218 | ColumnoaLaser6TecRelValue | read-only | mandatory | The thermo-electric-cooler current of laser no.1 relative to its maximum value in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.219 | ColumnoaLaser6TecRelHi | read-only | mandatory | Thermo-electric-cooler current of laser no.1 high warning threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.220 | ColumnoaLaser6TecRelHiHi | read-only | mandatory | Thermo-electric-cooler current of laser no.1 high alarm threshold in steps of 0.1%. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.221 | ColumnoaLaser6TemperatureLoLo | read-only | mandatory | Temperature of laser no.1 low alarm threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.222 | ColumnoaLaser6TemperatureLo | read-only | mandatory | Temperature of laser no.1 low warning threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.223 | ColumnoaLaser6TemperatureValue | read-only | mandatory | Temperature of laser no.1 in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.224 | ColumnoaLaser6TemperatureHi | read-only | mandatory | Temperature of laser no.1 high warning threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.225 | ColumnoaLaser6TemperatureHiHi | read-only | mandatory | Temperature of laser no.1 high alarm threshold in steps of 0.1 Celsius Degrees. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.226 | ColumnoaLaser6VoltageLoLo | read-only | optional | The supply voltage of laser no.1 low alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.227 | ColumnoaLaser6VoltageLo | read-only | optional | The supply voltage of laser no.1 low warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.228 | ColumnoaLaser6VoltageValue | read-only | optional | The supply voltage of laser no.1 in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.229 | ColumnoaLaser6VoltageHi | read-only | optional | The supply voltage of laser no.1 high warning threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.5.1.1.230 | ColumnoaLaser6VoltageHiHi | read-only | optional | The supply voltage of laser no.1 high alarm threshold in steps of 0.1 Volts. |
| 1.3.6.1.4.1.7501.1.2.116.6 | NodeoaDisplay | |||
| 1.3.6.1.4.1.7501.1.2.116.6.1 | TableoaDisplayTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1 | RowoaDisplayEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.1 | ColumnoaDisplayNumberOfLasers | read-only | mandatory | The number of lasers used by this optical amplifier |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.2 | ColumnoaDisplayNumberOfInternalVoltages | read-only | optional | The number of internal voltages monitored by this optical amplifier |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.3 | ColumnoaDisplayExtIOSupported | read-only | mandatory | Return 'true(1)' if external I/O feature is supported by the device. |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.4 | ColumnoaDisplaySbsSupported | read-only | mandatory | Return 'true(1)' if SBS feature is supported by the device. |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.5 | ColumnoaDisplayReturnLossSupported | read-only | mandatory | Return 'true(1)' if ReturnLoss feature is supported by the device. |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.6 | ColumnoaDisplaySbsEvaluatedThreshold | read-only | mandatory | The evaluated SBS output power or gain threshold in 0.1 dB(m) units. Not supported by all optical amplifiers |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.7 | ColumnoaDisplaySbsLastEvaluationState | read-only | mandatory | The result of last SBS threshold evaluation process. Returns 'evaluationNotSupported(1)' if SBS threshold evaluation is not supported by this optical amplifier |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.8 | ColumnoaDisplaySbsLastEvaluationTime | read-only | mandatory | The time of last successfull SBS threshold evaluation process. Not supported by all optical amplifiers |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.9 | ColumnoaDisplayOutputPwrOrGainNominal | read-only | mandatory | The nominal value of output power (or gain) in 0.1 dB(m) units. See oaConfigRegulationMode variable too |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.10 | ColumnoaDisplayOutputPwrOrGainAdjusted | read-only | mandatory | The adjusted desired value of output power (or gain) in 0.1 dB(m) units. See oaConfigRegulationMode variable too |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.11 | ColumnoaDisplayInputVoltageNominal | read-only | optional | The nominal value of input voltage in 0.1 V units. |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.12 | ColumnoaDisplayInternalVoltage1Nominal | read-only | optional | The nominal value of internal voltage no. 1 in 0.1 V units. |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.13 | ColumnoaDisplayInternalVoltage2Nominal | read-only | optional | The nominal value of internal voltage no. 2 in 0.1 V units. |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.14 | ColumnoaDisplayInternalVoltage3Nominal | read-only | optional | The nominal value of internal voltage no. 3 in 0.1 V units. |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.20 | ColumnoaDisplayLaser1VoltageNominal | read-only | optional | The nominal supply voltage of laser no.1 in 0.1 V units. |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.21 | ColumnoaDisplayLaser2VoltageNominal | read-only | optional | The nominal supply voltage of laser no.2 in 0.1 V units. |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.22 | ColumnoaDisplayLaser3VoltageNominal | read-only | optional | The nominal supply voltage of laser no.3 in 0.1 V units. |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.23 | ColumnoaDisplayLaser4VoltageNominal | read-only | optional | The nominal supply voltage of laser no.4 in 0.1 V units. |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.24 | ColumnoaDisplayLaser5VoltageNominal | read-only | optional | The nominal supply voltage of laser no.5 in 0.1 V units. |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.25 | ColumnoaDisplayLaser6VoltageNominal | read-only | optional | The nominal supply voltage of laser no.6 in 0.1 V units. |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.30 | ColumnoaDisplayLaser1PumpPowerRel | read-only | mandatory | The pump power of laser no.1 in steps of 0.1% |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.31 | ColumnoaDisplayLaser2PumpPowerRel | read-only | mandatory | The pump power of laser no.2 in steps of 0.1% |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.32 | ColumnoaDisplayLaser3PumpPowerRel | read-only | mandatory | The pump power of laser no.3 in steps of 0.1% |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.33 | ColumnoaDisplayLaser4PumpPowerRel | read-only | mandatory | The pump power of laser no.4 in steps of 0.1% |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.34 | ColumnoaDisplayLaser5PumpPowerRel | read-only | mandatory | The pump power of laser no.5 in steps of 0.1% |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.35 | ColumnoaDisplayLaser6PumpPowerRel | read-only | mandatory | The pump power of laser no.6 in steps of 0.1% |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.40 | ColumnoaDisplayLaser1FeaturesSupported | read-only | mandatory | The features supported by laser no.1 A bitfield containing the features supplied by this laser. Note that laserCurrent is always supplied. |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.41 | ColumnoaDisplayLaser2FeaturesSupported | read-only | mandatory | The features supported by laser no.2 |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.42 | ColumnoaDisplayLaser3FeaturesSupported | read-only | mandatory | The features supported by laser no.3 |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.43 | ColumnoaDisplayLaser4FeaturesSupported | read-only | mandatory | The features supported by laser no.4 |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.44 | ColumnoaDisplayLaser5FeaturesSupported | read-only | mandatory | The features supported by laser no.5 |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.45 | ColumnoaDisplayLaser6FeaturesSupported | read-only | mandatory | The features supported by laser no.6 |
| 1.3.6.1.4.1.7501.1.2.116.6.1.1.50 | ColumnoaDisplayAmplifierIsRamanType | read-only | mandatory | Returns true(1) if this amplifier is of RAMAN type |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ExtIOmask | INTEGER { maskAlarmsOnly(1), maskAlarmsAndWarnings(2), maskSpecial(3) } | ||
| ExtIOmode | INTEGER { modeActiveLowOutput(1), modeActiveHighOutput(2), modeRedundantMasterIrreversible(3), modeRedundantMasterFallback(4), modeRedundantSlave(5) } | ||
| LaserFeatures | INTEGER { lasNonExistent(0), lasCurrent(1), lasCurrentLasTec(3), lasCurrentLasTemperature(5), lasCurrentLasTecLasTemperature(7), lasCurrentLasVoltage(9), lasCurrentLasTecLasVoltage(11), lasCurrentLasTemperatureLasVoltage(13), lasCurrentLasTecLasTemperatureLasVoltage(15), lasCurrentLasPumpPower(17), lasCurrentLasTecLasPumpPower(19), lasCurrentLasTemperatureLasPumpPower(21), lasCurrentLasTecLasTemperatureLasPumpPower(23), lasCurrentLasVoltageLasPumpPower(25), lasCurrentLasTecLasVoltageLasPumpPower(27), lasCurrentLasTemperatureLasVoltageLasPumpPower(29), lasCurrentLasTecLasTemperatureLasVoltageLasPumpPower(31) } | ||
| NESlotWriteValue | INTEGER (-1..99) | ||
| RegulationMode | INTEGER { regModeConstantOutputPower(1), regModeConstantGain(2) } | ||
| SbsEvaluationMode | INTEGER { evalModeDefault(1), evalModeFullScan(2) } | ||
| SbsEvaluationState | INTEGER { evaluationNotSupported(1), evaluationDone(2), evaluationInProgress(3), evaluationFailed(4) } |