BRCMROBOMGMT5324MIB
179 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter Gauge IpAddress mgmt NetworkAddress TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.655 | Nodeproduct | |||
| 1.3.6.1.4.1.655.9 | Nodebcm5324 | |||
| 1.3.6.1.4.1.655.9.22 | Nodeoem | |||
| 1.3.6.1.4.1.655.9.22.1 | Nodemgmrsw | |||
| 1.3.6.1.4.1.655.9.22.1.1 | NodebasicSwitchMgt | |||
| 1.3.6.1.4.1.655.9.22.1.1.1 | ScalarswitchHardwareVersion | read-only | mandatory | ASCII string to specify device hardware verion, e.g. 0A.01 |
| 1.3.6.1.4.1.655.9.22.1.1.2 | ScalarswitchSoftwareVersion | read-only | mandatory | The current software/firmware version implemented in this device represented in non-zero integer. e.g. 10000 means version 1.00.00 |
| 1.3.6.1.4.1.655.9.22.1.1.3 | ScalarswitchHwAgingSwitch | read-write | mandatory | Enable the HW aging or not. |
| 1.3.6.1.4.1.655.9.22.1.1.4 | ScalarswitchAgingTime | read-write | mandatory | The timeout period in seconds for aging out dynamically learned forwarding information. 802.1D-1990 recommends a default of 300 seconds. the unit is 1 sec. |
| 1.3.6.1.4.1.655.9.22.1.1.5 | ScalarswitchRestartControl | read-write | mandatory | Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Se… |
| 1.3.6.1.4.1.655.9.22.1.1.6 | ScalarswitchPortNumber | read-only | mandatory | The total port number of this switch (including expansion s). |
| 1.3.6.1.4.1.655.9.22.1.1.7 | ScalarswitchVlanMode | read-write | mandatory | Vlan Mode in this switch. |
| 1.3.6.1.4.1.655.9.22.1.1.8 | ScalarswitchAutoMode | read-write | mandatory | Auto Mode in this switch. |
| 1.3.6.1.4.1.655.9.22.1.2 | NodebasicPortMgt | |||
| 1.3.6.1.4.1.655.9.22.1.2.1 | TableportTable | not-accessible | mandatory | Basic information for each port. |
| 1.3.6.1.4.1.655.9.22.1.2.1.1 | RowportEntry | not-accessible | mandatory | Port information entry. |
| 1.3.6.1.4.1.655.9.22.1.2.1.1.1 | ColumnportIndex | read-only | mandatory | port number, This is defined as ifIndex in the IF-MIB. |
| 1.3.6.1.4.1.655.9.22.1.2.1.1.2 | ColumnportName | read-write | mandatory | Name of each port. |
| 1.3.6.1.4.1.655.9.22.1.2.1.1.3 | ColumnportType | read-only | mandatory | The type of each port. |
| 1.3.6.1.4.1.655.9.22.1.2.1.1.4 | ColumnportLink | read-only | mandatory | This object indicates the link status of each port is up or down. |
| 1.3.6.1.4.1.655.9.22.1.2.1.1.5 | ColumnportEnable | read-write | mandatory | Enable/disable status of the port, default = enable(1). |
| 1.3.6.1.4.1.655.9.22.1.2.1.1.6 | ColumnportAdminMode | read-write | mandatory | To Control the speed & duplex mode for 10/100Mb ports, default = AutoNegotiation (1) (1) AutoNegotiation : detect by AN (i.e. AN enable) if link partner do not… |
| 1.3.6.1.4.1.655.9.22.1.2.1.1.7 | ColumnportSpeedDpxStatus | read-only | mandatory | The operating speed and duplex mode of the switched port. |
| 1.3.6.1.4.1.655.9.22.1.2.1.1.8 | ColumnportFlowControlConfiguration | read-write | mandatory | Flow control configuration, |
| 1.3.6.1.4.1.655.9.22.1.2.1.1.9 | ColumnportFlowCtrlStatus | read-only | mandatory | (1) Flow control mechanism is disabled. (2) BackPressure flow control machanism is used. (3) IEEE 802.3 flow control machanism is used. |
| 1.3.6.1.4.1.655.9.22.1.2.1.1.10 | ColumnportTrunkID | read-only | mandatory | The trunk to which this port belongs. A value of 0 means that this port does not belong to any trunk. A value greater than zero means that this port belongs to… |
| 1.3.6.1.4.1.655.9.22.1.2.2 | TablenetConfigTable | not-accessible | mandatory | This table contains addressing information relevant to this interface corresponding to IfEntry table. The number of entries is given by the value of ifNumber. |
| 1.3.6.1.4.1.655.9.22.1.2.2.1 | RownetConfigEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.655.9.22.1.2.2.1.1 | ColumnnetConfigIndex | read-only | mandatory | This index value uniquely identifies the interface to which this entry is applicable. This is defined as ifIndex in the IF-MIB. |
| 1.3.6.1.4.1.655.9.22.1.2.2.1.2 | ColumnnetConfigOperation | read-only | mandatory | This object indicates the operational status of this device. |
| 1.3.6.1.4.1.655.9.22.1.2.2.1.3 | ColumnnetConfigMacAddr | read-only | mandatory | The MAC address of the specified interface of the device. |
| 1.3.6.1.4.1.655.9.22.1.2.2.1.4 | ColumnnetConfigIpAddr | read-write | mandatory | The Internet address of the specified interface of the device. |
| 1.3.6.1.4.1.655.9.22.1.2.2.1.5 | ColumnnetConfigSNetMask | read-write | mandatory | The internet address subnet mask of the specified interface of the device. |
| 1.3.6.1.4.1.655.9.22.1.2.2.1.6 | ColumnnetConfigDfGateway | read-write | mandatory | The default gateway address which the routed packets are delivered to. |
| 1.3.6.1.4.1.655.9.22.1.3 | NodetrapMgt | |||
| 1.3.6.1.4.1.655.9.22.1.3.1 | ScalarswitchTrapLevel | read-write | mandatory | Trap reporting level for occasional event. The events are categorized into 7 levels based on severity. For example, if the value set to 3, the Trap will be sen… |
| 1.3.6.1.4.1.655.9.22.1.3.2 | TableswitchTrapManagerTable | not-accessible | mandatory | This table contains the information needed for sending traps. |
| 1.3.6.1.4.1.655.9.22.1.3.2.1 | RowswitchTrapManagerEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.655.9.22.1.3.2.1.1 | ColumnswitchTrapManagerIndex | read-only | mandatory | |
| 1.3.6.1.4.1.655.9.22.1.3.2.1.2 | ColumnswitchTrapManagerIpAddr | read-write | mandatory | The Internet address of the management station which trap is sent to . |
| 1.3.6.1.4.1.655.9.22.1.3.2.1.3 | ColumnswitchTrapManagerComm | read-write | mandatory | Community name used for sending the trap to this management station |
| 1.3.6.1.4.1.655.9.22.1.4 | NodeaddrMgt | |||
| 1.3.6.1.4.1.655.9.22.1.4.1 | NodeaddrPortMgt | |||
| 1.3.6.1.4.1.655.9.22.1.4.1.1 | TableaddrPortTable | not-accessible | mandatory | Address table for each port. |
| 1.3.6.1.4.1.655.9.22.1.4.1.1.1 | RowaddrPortEntry | not-accessible | mandatory | Address table entry for each port. |
| 1.3.6.1.4.1.655.9.22.1.4.1.1.1.1 | ColumnaddrPortIndex | read-only | mandatory | Port index. This is defined as ifIndex in the IF-MIB. |
| 1.3.6.1.4.1.655.9.22.1.4.1.1.1.2 | ColumnaddrPortLastSrcAddress | read-only | mandatory | The object is the last source address in this port |
| 1.3.6.1.4.1.655.9.22.1.4.2 | NodeaddrStaticMgt | |||
| 1.3.6.1.4.1.655.9.22.1.4.2.1 | ScalaraddrStaticMaxEntryNumber | read-only | mandatory | The max. count of static address table |
| 1.3.6.1.4.1.655.9.22.1.4.2.3 | ScalaraddrStaticUsedEntryNumber | read-only | mandatory | The used count of address entry. |
| 1.3.6.1.4.1.655.9.22.1.4.2.4 | ScalaraddrStaticMessageStatus | read-only | mandatory | The last status of static operation: (1) ok (2) addresscollision : CHIP address entry collision (3) addressfound : set the same address (4) badvalue : address … |
| 1.3.6.1.4.1.655.9.22.1.4.2.5 | ScalarswitchTrapStaticCollisionAddress1 | read-only | mandatory | The object is the first entry of the collision address in static table setting |
| 1.3.6.1.4.1.655.9.22.1.4.2.6 | ScalarswitchTrapStaticCollisionAddress2 | read-only | mandatory | The object is the second entry of the collision address in static table setting |
| 1.3.6.1.4.1.655.9.22.1.4.2.7 | ScalarswitchTrapStaticCollisionAddressNew | read-only | mandatory | The object is the address would like to set to the occupied entries in static table setting |
| 1.3.6.1.4.1.655.9.22.1.4.2.8 | TableaddrStaticTable | not-accessible | mandatory | The table contain information about static entry in the device. |
| 1.3.6.1.4.1.655.9.22.1.4.2.8.1 | RowaddrStaticEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.655.9.22.1.4.2.8.1.1 | ColumnaddrStaticIndex | read-only | mandatory | This index value uniquely identifies the address in static table. Value range between 1 and the value of addrStaticMaxAddrNumber. |
| 1.3.6.1.4.1.655.9.22.1.4.2.8.1.2 | ColumnaddrStaticSetAddress | read-write | mandatory | To set/modify the static address. If the two entries are occupied by the other static addresses, the set is fail |
| 1.3.6.1.4.1.655.9.22.1.4.3 | TableportMACSecurityConfig | not-accessible | mandatory | The MAC security configuration. |
| 1.3.6.1.4.1.655.9.22.1.4.3.1 | RowportMacSecurityEntry | not-accessible | mandatory | The Static Mac number and Mac Security mode of each port. |
| 1.3.6.1.4.1.655.9.22.1.4.3.1.1 | ColumnportMacIndex | read-only | mandatory | This is defined as ifIndex in the IF-MIB. |
| 1.3.6.1.4.1.655.9.22.1.4.3.1.2 | ColumnportStaticMacNo | read-only | mandatory | The static mac number of port. |
| 1.3.6.1.4.1.655.9.22.1.4.3.1.3 | ColumnportSecurityMode | read-write | mandatory | The security mode of port. |
| 1.3.6.1.4.1.655.9.22.1.4.4 | TableaddrDynamicTable | not-accessible | mandatory | The table contain information about dynamic entry in the device. |
| 1.3.6.1.4.1.655.9.22.1.4.4.1 | RowaddrDynamicEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.655.9.22.1.4.4.1.1 | ColumnaddrDynamicIndex | read-only | mandatory | This index value uniquely identifies the address in dynamic arl table. Value range between 1 and MaxDynamicIndex. |
| 1.3.6.1.4.1.655.9.22.1.4.4.1.2 | ColumnaddrDynamicSetAddress | read-only | mandatory | To show the dynamic address. Format: MAC(6 bytes)+Portid(4 bytes)+VID(2 bytes). |
| 1.3.6.1.4.1.655.9.22.1.5 | NodestatisticMgt | |||
| 1.3.6.1.4.1.655.9.22.1.5.1 | ScalarresetMIBCounter | read-write | mandatory | Clear all MIB counters for all ports to zero |
| 1.3.6.1.4.1.655.9.22.1.5.2 | TablestatisticPortTable | not-accessible | mandatory | A table that contains information about every port that is associated with this transparent bridge. |
| 1.3.6.1.4.1.655.9.22.1.5.2.1 | RowstatisticPortEntry | not-accessible | mandatory | A list of information for each port of a transparent bridge. |
| 1.3.6.1.4.1.655.9.22.1.5.2.1.1 | ColumnstatisticPort | read-only | mandatory | This is defined as ifIndex in the IF-MIB. |
| 1.3.6.1.4.1.655.9.22.1.5.2.1.2 | ColumnstatisticPortSymbolErrorCounts | read-only | mandatory | The number of times a packet contained symbol error |
| 1.3.6.1.4.1.655.9.22.1.5.2.1.3 | ColumnstatisticPortReceiveExcessSizeDiscards | read-only | mandatory | The number of frame that are greater than 1536 bytes |
| 1.3.6.1.4.1.655.9.22.1.5.2.1.4 | ColumnstatisticPortTransmtInDiscards | read-only | mandatory | The number of frame which are discarded due to lack of space on an output queue. |
| 1.3.6.1.4.1.655.9.22.1.5.2.1.5 | ColumnstatisticPortTransmitPauseControlFrameCounts | read-only | mandatory | The counter of PAUSE control packets transmitted by a port |
| 1.3.6.1.4.1.655.9.22.1.5.2.1.6 | ColumnstatisticPortReceivePauseControlFrameCounts | read-only | mandatory | The counter of PAUSE control packets received by a port |
| 1.3.6.1.4.1.655.9.22.1.6 | NodeportMirrorMgt | |||
| 1.3.6.1.4.1.655.9.22.1.6.1 | ScalarportMirrorSwitch | read-write | mandatory | A state to present whether the port monitor function is ON or OF in the device. The default is OFF. |
| 1.3.6.1.4.1.655.9.22.1.6.2 | ScalarmirrorCapturePort | read-write | mandatory | Destination port for mirrored packets. This is defined as ifIndex in the IF-MIB. |
| 1.3.6.1.4.1.655.9.22.1.6.3 | ScalarmirrorIngressPort | read-write | mandatory | Source ports for mirrored ingress packets. |
| 1.3.6.1.4.1.655.9.22.1.6.4 | ScalarmirrorIngressFiterRule | read-write | mandatory | all(1): Mirror all ingress frames DA(2): Mirror all received frame with DA=mirrorIngressMAC SA(2): Mirror all received frame with SA=mirrorIngressMAC |
| 1.3.6.1.4.1.655.9.22.1.6.5 | ScalarmirrorIngressDividerSwitch | read-write | mandatory | Ingress divder enable/disable. |
| 1.3.6.1.4.1.655.9.22.1.6.6 | ScalarmirrorIngressDividerCount | read-write | mandatory | Mirror every n received frame (n= mirrorIngressDividerCount) |
| 1.3.6.1.4.1.655.9.22.1.6.7 | ScalarmirrorIngressMAC | read-write | mandatory | MAC address that will be compared against ingress frame in accordance with mirrorIngressFiterRule |
| 1.3.6.1.4.1.655.9.22.1.6.8 | ScalarmirrorEgressPort | read-write | mandatory | Source ports for mirrored Egress packets. |
| 1.3.6.1.4.1.655.9.22.1.6.9 | ScalarmirrorEgressFiterRule | read-write | mandatory | all(1): Mirror all Egress frames DA(2): Mirror all transmitted frame with DA=mirrorEgressMAC SA(2): Mirror all Transmitted frame with SA=mirrorEgressMAC |
| 1.3.6.1.4.1.655.9.22.1.6.10 | ScalarmirrorEgressDividerSwitch | read-write | mandatory | Egress divder enable/disable. |
| 1.3.6.1.4.1.655.9.22.1.6.11 | ScalarmirrorEgressDividerCount | read-write | mandatory | Mirror every n transmitted frame (n= mirrorEgressDividerCount) |
| 1.3.6.1.4.1.655.9.22.1.6.12 | ScalarmirrorEgressMAC | read-write | mandatory | MAC address that will be compared against egress frame in accordance with mirrorEgressFiterRule |
| 1.3.6.1.4.1.655.9.22.1.7 | Nodedot1xMgt | |||
| 1.3.6.1.4.1.655.9.22.1.7.1 | Scalardot1xEnabled | read-write | mandatory | A switch to select whether the 802.1x is enable/disable/transparent |
| 1.3.6.1.4.1.655.9.22.1.7.2 | ScalarreAuthEnabled | read-write | mandatory | A switch to select whether the re-authentication function is enable/disable |
| 1.3.6.1.4.1.655.9.22.1.7.3 | ScalarreAuthPeriod | read-write | mandatory | A switch to select the period of re-authentication function. |
| 1.3.6.1.4.1.655.9.22.1.7.4 | ScalarreAuthMax | read-write | mandatory | A switch to select the maximun retry times of re-authentication function. |
| 1.3.6.1.4.1.655.9.22.1.7.5 | ScalarmaxReqCount | read-write | mandatory | The number that the authenticator retires on server timeouts before it declares authentication failure. |
| 1.3.6.1.4.1.655.9.22.1.7.6 | ScalarserverTimeout | read-write | mandatory | The timeout after an access-request is sent to the server before backend state machine retries. |
| 1.3.6.1.4.1.655.9.22.1.7.7 | ScalarsuppTimeout | read-write | mandatory | The timeout after an EAPOL authentication-request is sent to supplicant before backend state machine retries. |
| 1.3.6.1.4.1.655.9.22.1.7.8 | ScalarquietPeriod | read-write | mandatory | The timeout after a failure before authenticator re-tries to authenticate a supplicant. |
| 1.3.6.1.4.1.655.9.22.1.7.9 | ScalartxPeriod | read-write | mandatory | The timeout after an EAPOL identify-request is sent to supplicant before authenticator state machine retries. |
| 1.3.6.1.4.1.655.9.22.1.7.10 | ScalarradiusServerIp | read-write | mandatory | The IP address of the radius server. |
| 1.3.6.1.4.1.655.9.22.1.7.11 | ScalarsecurityKey | read-write | mandatory | The key in calculating MD5 encryption for enconding/deconding the Mesage-Authenticator in RADIUS packets. |
| 1.3.6.1.4.1.655.9.22.1.7.12 | ScalarradiusServerPort | read-only | mandatory | The port of radius server. |
| 1.3.6.1.4.1.655.9.22.1.7.13 | ScalarradiusServerACCOUNTPort | read-only | mandatory | The ACCOUNT port of radius server. |
| 1.3.6.1.4.1.655.9.22.1.7.14 | TableportAuthenticationMode | not-accessible | mandatory | The authentication mode of port in 802.1x. |
| 1.3.6.1.4.1.655.9.22.1.7.14.1 | RowportModeEntry | not-accessible | mandatory | For 802.1p frame, mapping the 802.1p pri[2:0] (priority tag) to the priority queue of the system. |
| 1.3.6.1.4.1.655.9.22.1.7.14.1.1 | ColumnportDot1xIndex | read-only | mandatory | This is defined as ifIndex in the IF-MIB. |
| 1.3.6.1.4.1.655.9.22.1.7.14.1.2 | ColumnportAuthMode | read-write | mandatory | The authentocation mode of port. |
| 1.3.6.1.4.1.655.9.22.1.8 | NodetrunkMgt | |||
| 1.3.6.1.4.1.655.9.22.1.8.1 | NodeportTrunkMgt | |||
| 1.3.6.1.4.1.655.9.22.1.8.1.1 | ScalarportTrunkSwitch | read-write | mandatory | A switch to select whether the Trunk function is ON or OFF. The default is OFF. |
| 1.3.6.1.4.1.655.9.22.1.8.1.2 | ScalarportTrunkMaxGroupCount | read-only | mandatory | Max. Trunk group count in this device |
| 1.3.6.1.4.1.655.9.22.1.8.1.3 | ScalarportTrunkMaxPortCount | read-only | mandatory | Max. Trunk port in a group in this device [AC1012SMBD] = 26 |
| 1.3.6.1.4.1.655.9.22.1.8.1.4 | TableportTrunkTable | not-accessible | mandatory | The table contain information for Port Trunking function. |
| 1.3.6.1.4.1.655.9.22.1.8.1.4.1 | RowportTrunkEntry | not-accessible | mandatory | Table entry of port Trunk. |
| 1.3.6.1.4.1.655.9.22.1.8.1.4.1.1 | ColumnportTrunkIndex | read-only | mandatory | Value range between 1 and the value of portTrunkMaxGroupCount |
| 1.3.6.1.4.1.655.9.22.1.8.1.4.1.2 | ColumnportTrunkGet | read-only | mandatory | Get Port map in the specific trunk |
| 1.3.6.1.4.1.655.9.22.1.8.1.4.1.3 | ColumnportTrunkGroupDestory | read-write | mandatory | A state to present whether the Port Trunk group is ON or OFF in the device. The default value is OFF. |
| 1.3.6.1.4.1.655.9.22.1.8.1.4.1.4 | ColumnportTrunkPortAdd | read-write | mandatory | Add ports to the specific Truck group. |
| 1.3.6.1.4.1.655.9.22.1.8.1.4.1.5 | ColumnportTrunkPortRemove | read-write | mandatory | Remove ports from the specific Truck group. |
| 1.3.6.1.4.1.655.9.22.1.9 | NodespanningTreeMgt | |||
| 1.3.6.1.4.1.655.9.22.1.9.1 | ScalarspanningTreeSwitch | read-write | mandatory | A switch to select whether the spanning tree is ON or OFF. The default is ON. If the value is changed, the system will be restarted. |
| 1.3.6.1.4.1.655.9.22.1.9.2 | TablespanningTreeLinkTable | not-accessible | mandatory | A table that contains information about link delay switch of each port. |
| 1.3.6.1.4.1.655.9.22.1.9.2.1 | RowspanningTreeLinkEntry | not-accessible | mandatory | A list of information for delay switch of each port. |
| 1.3.6.1.4.1.655.9.22.1.9.2.1.1 | ColumnspanningTreeLinkIndex | read-only | mandatory | The index of the port number for which this entry contains link delay switch information of each port. This is defined as ifIndex in the IF-MIB. |
| 1.3.6.1.4.1.655.9.22.1.9.2.1.2 | ColumnspanningTreeLinkDelaySwitch | read-write | mandatory | A switch to select whether the spanning tree will do the link delay or not. The default is ON. |
| 1.3.6.1.4.1.655.9.22.1.10 | NodepriorityMgt | |||
| 1.3.6.1.4.1.655.9.22.1.10.1 | ScalarprioritySwitch | read-write | mandatory | A switch to select whether the priority is enable/disable |
| 1.3.6.1.4.1.655.9.22.1.10.2 | TableportPriorityTable | not-accessible | mandatory | Port Priority information for each port. |
| 1.3.6.1.4.1.655.9.22.1.10.2.1 | RowportPriorityEntry | not-accessible | mandatory | Port priority information entry. |
| 1.3.6.1.4.1.655.9.22.1.10.2.1.1 | ColumnportPriorityIndex | read-only | mandatory | This is defined as ifIndex in the IF-MIB. |
| 1.3.6.1.4.1.655.9.22.1.10.2.1.2 | ColumnportPrioritySetting | read-write | mandatory | port priority setting |
| 1.3.6.1.4.1.655.9.22.1.10.2.1.3 | Columnport8021PSetting | read-write | mandatory | port 802.1p priority setting |
| 1.3.6.1.4.1.655.9.22.1.10.3 | Tablepriority8021pSetting | not-accessible | mandatory | Mapping eight kinds of Tag to four Queues. |
| 1.3.6.1.4.1.655.9.22.1.10.3.1 | RowtagMappingEntry | not-accessible | mandatory | For 802.1p frame, mapping the 802.1p pri[2:0] (priority tag) to the priority queue of the system. |
| 1.3.6.1.4.1.655.9.22.1.10.3.1.1 | ColumntagIndex | read-only | mandatory | This is defined as ifIndex in the IF-MIB. |
| 1.3.6.1.4.1.655.9.22.1.10.3.1.2 | ColumntagMappingToQueue | read-write | mandatory | Tag Mapping to Priority Queue |
| 1.3.6.1.4.1.655.9.22.1.10.4 | ScalarpriorityEnableFlowControl | read-write | mandatory | 0: disable flow control. 1: enable flow control. |
| 1.3.6.1.4.1.655.9.22.1.11 | NodeIGMPMgt | |||
| 1.3.6.1.4.1.655.9.22.1.11.1 | ScalarIGMPSwitch | read-write | mandatory | A switch to select whether the IGMP snooping is enable/disable Port Mirroring should be disable when set IGMP enable. |
| 1.3.6.1.4.1.655.9.22.1.11.2 | TablemultiPortGroupTable | not-accessible | mandatory | The information for the multicast group which stored in the multi-port table |
| 1.3.6.1.4.1.655.9.22.1.11.2.1 | RowmultiPortGroupEntry | not-accessible | mandatory | multi-port information entry. |
| 1.3.6.1.4.1.655.9.22.1.11.2.1.1 | ColumnmultiPortGroupIndex | read-only | mandatory | |
| 1.3.6.1.4.1.655.9.22.1.11.2.1.2 | ColumnmultiPortGroupMACAddress | read-only | mandatory | |
| 1.3.6.1.4.1.655.9.22.1.11.2.1.3 | ColumnmultiPortGroupMember | read-write | mandatory | The port number belong to the multicast group |
| 1.3.6.1.4.1.655.9.22.1.12 | NoderatecontrolMgt | |||
| 1.3.6.1.4.1.655.9.22.1.12.1 | ScalarrcDropPacket | read-write | mandatory | A switch to select whether the Drop Packet for Ingress Limit is enable/disable |
| 1.3.6.1.4.1.655.9.22.1.12.2 | TablercIngressPortTable | not-accessible | mandatory | The information for Ingress Rate Control of per port. |
| 1.3.6.1.4.1.655.9.22.1.12.2.1 | RowrcIngressPortEntry | not-accessible | mandatory | Ingress Rate Control information entry. |
| 1.3.6.1.4.1.655.9.22.1.12.2.1.1 | ColumnrcIngressPortIndex | read-only | mandatory | |
| 1.3.6.1.4.1.655.9.22.1.12.2.1.2 | ColumnrcIngressCount | read-write | mandatory | Rate = No Limit , when N=0. Rate = N*64 Kbps , when N=1~28. Rate = (N-27)*1 Mbps , when N=29~127. Rate = (N-115)*8Mb, when N=128~240. (only for gigabit port) |
| 1.3.6.1.4.1.655.9.22.1.12.3 | TablercEngressPortTable | not-accessible | mandatory | The information for Engress Rate Control of per port. |
| 1.3.6.1.4.1.655.9.22.1.12.3.1 | RowrcEngressPortEntry | not-accessible | mandatory | Engress Rate Control information entry. |
| 1.3.6.1.4.1.655.9.22.1.12.3.1.1 | ColumnrcEngressPortIndex | read-only | mandatory | |
| 1.3.6.1.4.1.655.9.22.1.12.3.1.2 | ColumnrcEngressCount | read-write | mandatory | Rate = No Limit , when N=0. Rate = N*64 Kbps , when N=1~28. Rate = (N-27)*1 Mbps , when N=29~127. Rate = (N-115)*8Mb, when N=128~240. (only for gigabit port) |
| 1.3.6.1.4.1.655.9.22.1.13 | NodestormcontrolMgt | |||
| 1.3.6.1.4.1.655.9.22.1.13.1 | ScalarscRate | read-write | mandatory | A switch to select whether the Rate for Storm Control. |
| 1.3.6.1.4.1.655.9.22.1.13.2 | ScalarscBCPKT | read-write | mandatory | A switch to select Rate of Storm Control for Broadcast Packet. |
| 1.3.6.1.4.1.655.9.22.1.13.3 | ScalarscDLFPKT | read-write | mandatory | A switch to select Rate of Storm Control for Flooding Packet. |
| 1.3.6.1.4.1.655.9.22.1.13.4 | TablescPortTable | not-accessible | mandatory | The information for Storm Control of each port. |
| 1.3.6.1.4.1.655.9.22.1.13.4.1 | RowscPortEntry | not-accessible | mandatory | Storm Control information entry for each port. |
| 1.3.6.1.4.1.655.9.22.1.13.4.1.1 | ColumnscPortIndex | read-only | mandatory | |
| 1.3.6.1.4.1.655.9.22.1.13.4.1.2 | ColumnscPortBCPacket | read-write | mandatory | Set the Storm Control of Port for Broadcast Packet. |
| 1.3.6.1.4.1.655.9.22.1.13.4.1.3 | ColumnscPortDLFPacket | read-write | mandatory | Set the Storm Control of Port for Flooding Packet. |
| 1.3.6.1.4.1.655.9.22.1.14 | NodevirtualLanMgt | |||
| 1.3.6.1.4.1.655.9.22.1.14.1 | ScalarvirtualLanSwitch | read-write | mandatory | Vlan Switch. 1)802.1q VLAN ; 2)Port-base VLAN ; 3)None |
| 1.3.6.1.4.1.655.9.22.1.14.2 | ScalarvirtualLanMaxDomainCount | read-only | mandatory | Max. Virtual LAN domain count in this device |
| 1.3.6.1.4.1.655.9.22.1.14.3 | ScalarvirtualLanMaxMemberCount | read-only | mandatory | Max. member in a Virtual LAN domain in this device |
| 1.3.6.1.4.1.655.9.22.1.14.4 | ScalarvirtualLanDestory | read-write | mandatory | To reset the VLAN configuration. The default VLAN can not be destory. all ports belong to the default VLAN. |
| 1.3.6.1.4.1.655.9.22.1.14.5 | TablevirtualLanTable | not-accessible | mandatory | The table contain information for Virtual LAN function. |
| 1.3.6.1.4.1.655.9.22.1.14.5.1 | RowvirtualLanEntry | not-accessible | mandatory | Table entry of port monitor. |
| 1.3.6.1.4.1.655.9.22.1.14.5.1.1 | ColumnvirtualLanIndex | read-only | mandatory | VLAN ID, the value range between 1 and the value of virtualLanMaxDomainCount |
| 1.3.6.1.4.1.655.9.22.1.14.5.1.2 | ColumnvirtualLanDomainName | read-write | mandatory | Domain name |
| 1.3.6.1.4.1.655.9.22.1.14.5.1.3 | ColumnvirtualLanGet | read-only | mandatory | Get Port map in the specific VLAN |
| 1.3.6.1.4.1.655.9.22.1.14.5.1.4 | ColumnvirtualLanDomainDestory | read-write | mandatory | To reset the domain's VLAN configuration. The default VLAN can not be destory. Ports which do not belong to other VLAN are belong to the default VLAN. |
| 1.3.6.1.4.1.655.9.22.1.14.5.1.5 | ColumnvirtualLanPortAdd | read-write | mandatory | Add ports to the specific VLAN |
| 1.3.6.1.4.1.655.9.22.1.14.5.1.6 | ColumnvirtualLanPortRemove | read-write | mandatory | Remove the specific ports from the given VLAN |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MacAddress | OCTET STRING (SIZE (6)) | ||
| PortList | OCTET STRING | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |