BRI-OPT-MIB
200 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises Gauge |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.449 | Nodecodex | |||
| 1.3.6.1.4.1.449.2 | NodecdxProductSpecific | |||
| 1.3.6.1.4.1.449.2.1 | Nodecdx6500 | |||
| 1.3.6.1.4.1.449.2.1.2 | Nodecdx6500Configuration | |||
| 1.3.6.1.4.1.449.2.1.2.1 | Nodecdx6500CfgProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1 | Nodecdx6500PCTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1.26 | Nodecdx6500PPCTISDN | |||
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1 | Nodecdx6500PPCTBRIConfig | |||
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.1 | Tablecdx6500PPCTBRIPortTable | not-accessible | mandatory | This table contains BRI Port configuration parameters |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.1.1 | Rowcdx6500PPCTBRIPortEntry | not-accessible | mandatory | Each PortEntry contains the configuration parameters for one BRI ISDN port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.1.1.1 | Columncdx6500BRICfgPortNumber | read-only | mandatory | Port number of the port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.1.1.2 | Columncdx6500BRICfgPortType | read-only | mandatory | The Port Type of the port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.1.1.3 | Columncdx6500BRICfgSwitchType | read-only | mandatory | Specifies switch type for the central office. VN4 - French VN4 standard 1TR6 - German switch standard BTNR - UK Standard ETSI - Euro-ISDN 5ESS - AT&T switch NI… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.1.1.4 | Columncdx6500BRICfgVmebug | read-only | mandatory | Engineering use only. Enable/disable the running of the OST VMEBUG debugger. NOTE: For this to work the flash must be loaded with the dbg_vmebug file. If the t… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.1.1.5 | Columncdx6500BRICfgTEI | read-only | mandatory | The range is 0..63,127. The range 0..63 indicate a static TEI provided by the Network subscribing. 127: TEI negotiated. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2 | Nodecdx6500PPCTBRIChan | |||
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1 | Tablecdx6500PPCTBRIX25ChanTable | not-accessible | mandatory | This table contains BRI Channel configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1 | Rowcdx6500PPCTBRIX25ChanEntry | not-accessible | mandatory | Each ChanEntry contains the configuration parameters for one BRI ISDN channel. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.1 | Columncdx6500BRIX25ChanCfgPortNumber | read-only | mandatory | The BRI port number. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.2 | Columncdx6500BRIX25ChanCfgChannelNum | read-only | mandatory | Configured ISDN Channel Number. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.3 | Columncdx6500BRIX25ChanCfgChannelType | read-only | mandatory | ISDN channel type. bChannel - a full duplex, 56 or 64 Kbps channel. dChannel - a full duplex, 16 Kbps channel configured only for packet mode. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.4 | Columncdx6500BRIX25ChanCfgAccessType | read-only | mandatory | permanent : Permanent BRI channels switched : Switched BRI channels. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.5 | Columncdx6500BRIX25ChanCfgTimeslot | read-only | mandatory | Physical channel number for permanent switch type only. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.6 | Columncdx6500BRIX25ChanCfgSPID | read-only | mandatory | Service Profile Identifiers (SPID) is to define the services subscribed to by the ISDN device that is accessing the ISDN provider. This value is provided by yo… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.7 | Columncdx6500BRIX25ChanCfgISDNCallAcc | read-only | mandatory | Specifies the ISDN routing for a setup message coming from the network. allCalls : ISDN routing for all setup message coming from the network. addressOnly : IS… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.8 | Columncdx6500BRIX25ChanCfgLocalSubsAddr | read-only | mandatory | Specifies the local subscriber address which is provided by the service provider. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.9 | Columncdx6500BRIX25ChanCfgLocalSubsSubAddr | read-only | mandatory | Specifies the local subscriber subaddress which is provided by the service provider. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.10 | Columncdx6500BRIX25ChanCfgRateAdaption | read-only | mandatory | Rate adaption parameter for this channel. rate56k : Rate of 56 K rate64k : Rate of 64 K. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.11 | Columncdx6500BRIX25ChanCfgProtocolType | read-only | mandatory | Specifies the protocol type run over ISDN B channel. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.12 | Columncdx6500BRIX25ChanCfgLinkAddr | read-only | mandatory | The logical link address must be set to complementary values in devices at each end of the link: dte - link to have logical DTE address (A) dce - link to have … |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.13 | Columncdx6500BRIX25ChanCfgNumPVCChannels | read-only | mandatory | Number of logical channels used for Permanent Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and cons… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.14 | Columncdx6500BRIX25ChanCfgStartPVCChanNum | read-only | mandatory | This is the starting logical channel number for the Permanent Virtual Circuits on this link. Not used if the number of PVCs = 0. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.15 | Columncdx6500BRIX25ChanCfgBNumSVCChannels | read-only | mandatory | Number of logical channels used in Switched Virtual Circuits. The total number of PVC and SVC channels on a link should be kept as small as possible and consis… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.16 | Columncdx6500BRIX25ChanCfgStartSVCChanNum | read-only | mandatory | This is the starting logical channel number for the Switched Virtual Circuits on this link. Not used if the number of SVCs = 0. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.17 | Columncdx6500BRIX25ChanCfgInitialFrame | read-only | mandatory | Specify the initial frame required by other end for link startup: none - do nothing (other end initiates link-up) sabm - send SABM disc - send DISC, then SABM |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.18 | Columncdx6500BRIX25ChanCfgT1TransRetryTimer | read-only | mandatory | T1 link retry timer value in tenths of a second (e.g. 30 = 3.0 seconds). |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.19 | Columncdx6500BRIX25ChanCfgT4PollTimer | read-only | mandatory | This sets the time an idle link is probed for assurance of connection to the remote device. 0 - disable the timer X - X is in tenths of a second (e.g. 40 = 4.0… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.20 | Columncdx6500BRIX25ChanCfgBN2TransTries | read-only | mandatory | The maximum number of attempts allowed to complete a transmission. This is a B channel object |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.21 | Columncdx6500BRIX25ChanCfgFrameSeqCount | read-only | mandatory | Port uses normal or extended frame sequence numbering: norm - normal sequencing (modulo 8) ext - extended sequencing (modulo 128) |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.22 | Columncdx6500BRIX25ChanCfgBKFrameWindow | read-only | mandatory | Frame level window size must be set to the same value in devices at each end of the link. This is a B-channel object. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.23 | Columncdx6500BRIX25ChanCfgPktSeqCount | read-only | mandatory | Port uses normal or extended packet level sequence numbers norm - normal sequencing (Modulo 8) ext - extended sequencing (Modulo 128) The value must be the sam… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.24 | Columncdx6500BRIX25ChanCfgBWPktWindow | read-only | mandatory | Packet level window size must be set to the same value in devices at each end of the link. This is a B-channel object. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.25 | Columncdx6500BRIX25ChanCfgBPPktSize | read-only | mandatory | This is the maximum packet size used on X.25 links. For proper operation, the size must be the same in devices at each end of the link. This is a B-channel obj… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.26 | Columncdx6500BRIX25ChanCfgMaxNegoPktSize | read-only | mandatory | This is the maximum negotiated packet size allowed for inbound and outbound calls on this X.25 link. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.27 | Columncdx6500BRIX25ChanCfgDataQUpperThres | read-only | mandatory | This is the maximum number of data packets a channel on this port will queue for transmission before invoking flow control to the attached channel. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.28 | Columncdx6500BRIX25ChanCfgDataQLowerThres | read-only | mandatory | This is the number of data packets a channel on this port will have queued for transmission when it releases flow control to the attached channel. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.29 | Columncdx6500BRIX25ChanCfgRestartTimer | read-only | mandatory | Restart-Request timeout timer in seconds. If timer expires, request is sent again. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.30 | Columncdx6500BRIX25ChanCfgResetTimer | read-only | mandatory | Reset-Request timeout timer in seconds. If timer expires, request is sent again. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.31 | Columncdx6500BRIX25ChanCfgCallTimer | read-only | mandatory | Call-Request timeout timer in seconds. If timer expires, call is cleared. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.32 | Columncdx6500BRIX25ChanCfgClearTimer | read-only | mandatory | Clear-Request timeout timer in seconds. If timer expires, request is sent again. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.33 | Columncdx6500BRIX25ChanCfgFacToDelFromOutbCalls | read-only | mandatory | Specify facilities deleted from an outbound call before it is forwarded: NONE - no facilities deleted THRO - delete throughput class negotiation NUI - delete n… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.34 | Columncdx6500BRIX25ChanCfgFacToAddToOutbCalls | read-only | mandatory | Specify facilities added to an outbound call before it is forwarded: NONE - no facilities added REV - add reverse charging PACK - add packet size negotiation W… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.35 | Columncdx6500BRIX25ChanCfgFacToBarInOutbCalls | read-only | mandatory | Specify facilities which, if present in an outbound call, will be blocked by the port: NONE - no facility blocked REV - bar reverse charging FAST - bar fast se… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.36 | Columncdx6500BRIX25ChanCfgFacToBarInInbCalls | read-only | mandatory | Specify facilities which, if present in an inbound call, will be blocked by the port: NONE - no facility blocked BCUG - bar Bilateral Closed User Group DGRAM -… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.37 | Columncdx6500BRIX25ChanCfgX25Options | read-only | mandatory | Select X.25 options as follows: NONE - no option specified 1980 - use X.25 1980 NUI - perform network user identification validation check PDN - connected to P… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.38 | Columncdx6500BRIX25ChanCfgNumRoutDgtInCallUsrData | read-only | mandatory | This specifies the number of routing digits in the call user data. It is used on X.25 links attached to a Public Data Network where the private network address… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.39 | Columncdx6500BRIX25ChanCfgNumPreAddrDgstrpOutgCalls | read-only | mandatory | For X.25 links connected to a Public Data Network, this parameter specifies the number of prefix digits to remove from the called address before forwarding the… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.40 | Columncdx6500BRIX25ChanCfgInDigitsToStrip | read-only | mandatory | For X.25 links connected to a Public Data Network, this parameter specifies the number of prefix digits to remove from the incoming calling address before forw… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.41 | Columncdx6500BRIX25ChanCfgRestrictedConnDest | read-only | mandatory | All calls entering this port will be routed to the destination specified in this parameter, irrespective of route selection table entries. For example, to rout… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.42 | Columncdx6500BRIX25ChanCfgPortAddress | read-only | mandatory | On X.25 links: If the X.25 Option REGO, REGSO or REGI is selected, this address is inserted into the calling address field of the outbound or inbound call pack… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.43 | Columncdx6500BRIX25ChanCfgCUGMembership | read-only | mandatory | The port may be a member of up to 8 different Closed User Groups (CUGs). Each CUG membership must be a two digit number (except double dash) and separated by a… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.44 | Columncdx6500BRIX25ChanCfgBillingRecords | read-only | mandatory | This controls whether billing (accounting) records will be created for calls on this port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.45 | Columncdx6500BRIX25ChanCfgSubAddrSize | read-only | mandatory | For ports connected to a Public Data Network, this parameter specifies the number of digits in the subaddress of an X.25 address. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.46 | Columncdx6500BRIX25ChanCfgCallSecurity | read-only | mandatory | For ports used as V.25 bis or SW56K backup, this parameter specifies the type of call security to use prior to the link being detected up. disable - Disable wi… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.47 | Columncdx6500BRIX25ChanCfgProtectionLevel | read-only | mandatory | This specifies the level of data or connection protection which will be applied to calls to or from this port. The actual level for a call will be negotiated t… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.48 | Columncdx6500BRIX25ChanCfgReconnTimeout | read-only | mandatory | This specifies the number of seconds that DCP on the originating side will wait between reconnection attempts. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.49 | Columncdx6500BRIX25ChanCfgReconnTriesLt | read-only | mandatory | This specifies the number of times that DCP on the originating side will attempt to reconnect before clearing the call. For0, it will not attempt to reconnect. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.50 | Columncdx6500BRIX25ChanCfgFacSubsCtl | read-only | mandatory | NONE - Subscription to facilities not enforced. FCN_ON - Flow Control Negotiation enabled. Packet and Window size negotiation facilities in an inbound call wil… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.51 | Columncdx6500BRIX25ChanCfgAlarmPriority | read-only | mandatory | Specify the severity level of LINK UP and LINK DOWN alarms: network - Severity HIGH alarms will be generated access - Severity LOW alarms will be generated |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.52 | Columncdx6500BRIX25ChanCfgChanTEI | read-only | mandatory | Terminal Endpoint Identifier. Value is provided by the service provider. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.53 | Columncdx6500BRIX25ChanCfgX25NetworkType | read-only | mandatory | Specifies the X.25 Network Type: Transpac, PSS, Datanet, Telenet. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.54 | Columncdx6500BRIX25ChanCfgDNumSVCChannels | read-only | mandatory | Specifies the number of logical SVC channels on this port. This is a D-channel object. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.55 | Columncdx6500BRIX25ChanCfgDWPktWindow | read-only | mandatory | Specifies the default packet level window size when it is not negotiated for the individual call. The value must be the same for both ends of the link. This is… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.56 | Columncdx6500BRIX25ChanCfgDPPktSize | read-only | mandatory | Specifies the maximum default packet size (in bytes) for inbound and outbound calls on the link. The value must be the same for both ends of the link. This is … |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.57 | Columncdx6500BRIX25ChanCfgDKFrameWindow | read-only | mandatory | Specifies the number of unacknowledged frames that can be outstanding. When there is a high link delay, set this parameter to a high value to improve throughpu… |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.58 | Columncdx6500BRIX25ChanCfgDN2TransTries | read-only | mandatory | Specifies the maximum number of times a frame is resent before disconnect. This is a D-channel object. |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.59 | Columncdx6500BRIX25ChanCfgT1Timer | read-only | mandatory | Sets the T1 Retry Timer. The values are in tenths of a second. (30 = 3.0 seconds) |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.60 | Columncdx6500BRIX25ChanCfgT2Timer | read-only | mandatory | Sets the T2 timer. The values are in tenths of a second. (40 = 4.0 seconds) |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.61 | Columncdx6500BRIX25ChanCfgLinkType | read-only | mandatory | Engineering use only. Sets the link type: dChannel - Run over the D channel v24Dte - DTE on the V.24 port v24Dce - DCE on the V.24 port |
| 1.3.6.1.4.1.449.2.1.2.1.1.26.1.2.1.1.62 | Columncdx6500BRIX25ChanCfgAddrTrans | read-only | mandatory | Select any of the following address translation options NONE - no option specified Outbound Call Processing: DEDO - delete called address DEGO - delete calling… |
| 1.3.6.1.4.1.449.2.1.3 | Nodecdx6500Statistics | |||
| 1.3.6.1.4.1.449.2.1.3.1 | Nodecdx6500StatProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1 | Nodecdx6500PSTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1.27 | Nodecdx6500BRIStats | |||
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1 | Tablecdx6500BRIPStatsTable | not-accessible | mandatory | A table of BRI port statistics. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1 | Rowcdx6500BRIPStatsTableEntry | not-accessible | mandatory | Each entry contains the statistics for a single BRI port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.1 | Columncdx6500BRIPStatPortNumber | read-only | mandatory | The port number of the BRI port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.2 | Columncdx6500BRIPStatPortType | read-only | mandatory | The Port Type of the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.3 | Columncdx6500BRIPStatPortStatus | read-only | mandatory | Status of this port : Enabled - Port is enabled Disabled - Port is disabled Busyout - Port has been busied out Unknown - Port not recognized Init Failed - Port… |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.4 | Columncdx6500BRIPStatNumConfigChannels | read-only | mandatory | The number of configured channels. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.5 | Columncdx6500BRIPStatSwitchType | read-only | mandatory | Specifies switch type for the central office. VN4 : French VN4 standard 1TR6 : German switch standard BTNR : UK Standard ETSI : Euro-ISDN 5ESS : AT&T switch NI… |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.6 | Columncdx6500BRIPStatTEI | read-only | mandatory | Terminal Endpoint Identifier. The range of values [0 - 63] indicate a static TEI provided by the Network subscribing. 127: TEI negotiated |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.7 | Columncdx6500BRIPStatLastStatsReset | read-only | mandatory | Time when the statistics were last reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.8 | Columncdx6500BRIPStatCharsInTot | read-only | mandatory | Number of characters received since last node, port or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.9 | Columncdx6500BRIPStatCharsInPerSec | read-only | mandatory | Average number of characters received per second since last node, port or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.10 | Columncdx6500BRIPStatCharsOutTot | read-only | mandatory | Number of characters sent since last node, port or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.11 | Columncdx6500BRIPStatCharsOutPerSec | read-only | mandatory | Average number of characters sent per second since last node, port or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.12 | Columncdx6500BRIPStatFramesInTot | read-only | mandatory | Number of frames received since last node, port or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.13 | Columncdx6500BRIPStatFramesInPerSec | read-only | mandatory | Average number of Frames received per second since last node, port or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.14 | Columncdx6500BRIPStatFrameOutTot | read-only | mandatory | Number of frames sent since last node, port or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.15 | Columncdx6500BRIPStatFrameOutPerSec | read-only | mandatory | Average number of Frames sent per second since last node, port or statistics reset. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.16 | Columncdx6500BRIPStatAvFrameSzIn | read-only | mandatory | Average size of the frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.17 | Columncdx6500BRIPStatAvFrameSzOut | read-only | mandatory | Average size of the frames sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.18 | Columncdx6500BRIPStatPortUtilIn | read-only | mandatory | Current inbound port utilization. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.19 | Columncdx6500BRIPStatPortUtilOut | read-only | mandatory | Current outbound port utilization. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.20 | Columncdx6500BRIPStatPortUtilInMax | read-only | mandatory | Maximum inbound port utilization. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.1.1.21 | Columncdx6500BRIPStatPortUtilOutMax | read-only | mandatory | Maximum outbound port utilization. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2 | Tablecdx6500BRIChanStatsTable | not-accessible | mandatory | A table of BRI channel statistics. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1 | Rowcdx6500BRIChanStatsTableEntry | not-accessible | mandatory | Each entry contains the statistics for a single channel. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.1 | Columncdx6500BRICStatsPortNumber | read-only | mandatory | The BRI port number associated with the channels. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.2 | Columncdx6500BRICStatsChannelNum | read-only | mandatory | The ISDN channel Number. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.3 | Columncdx6500BRICStatsChannelType | read-only | mandatory | ISDN channel type. B Channel : a full duplex, 56 or 64 Kbps channel. D Channel : a full duplex, 16 Kbps channel configured only for packet mode. Unknown : unkn… |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.4 | Columncdx6500BRICStatsAccessType | read-only | mandatory | Switched BRI channel type. Permanent channel type : not supported in this version Unknown : unknown access type . |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.5 | Columncdx6500BRICStatsProtocolType | read-only | mandatory | Specifies the protocol type such as X25, FRI. `Unknown' indicates unknown protocol type. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.6 | Columncdx6500BRICStatsCallState | read-only | mandatory | Call State: Disconnected - Call in Idle state Ringing - Trying to establish connection Connected - Call connected Disabled - Call disabled Congested - not supp… |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.7 | Columncdx6500BRICStatsChannelStatus | read-only | mandatory | Disabled - Channel disabled. Enabled - Channel enabled. Busyout - Channel busyout Unknown - unknown status. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.8 | Columncdx6500BRICStatsInCurCallAddr | read-only | mandatory | The address for the current inbound ISDN call. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.9 | Columncdx6500BRICStatsInCurCallSubAddr | read-only | mandatory | The subaddress for the current ISDN call. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.10 | Columncdx6500BRICStatsInAvConnTm | read-only | mandatory | Average connection time for an inbound ISDN call. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.11 | Columncdx6500BRICStatsInCurConnTm | read-only | mandatory | Current connection time for an inbound ISDN call. current time - Time connection started. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.12 | Columncdx6500BRICStatsInMinConnTm | read-only | mandatory | Minimum connection time for an inbound ISDN call. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.13 | Columncdx6500BRICStatsInMaxConnTm | read-only | mandatory | Maximum connection time for an inbound ISDN call. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.14 | Columncdx6500BRICStatsInNumSuccCalls | read-only | mandatory | Total number of successful inbound calls. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.15 | Columncdx6500BRICStatsInNumFailCalls | read-only | mandatory | Total number of unsuccessful inbound calls. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.16 | Columncdx6500BRICStatsOutCurCallAddr | read-only | mandatory | The address of the current ISDN outbound call. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.17 | Columncdx6500BRICStatsOutCurCallSubAddr | read-only | mandatory | The subaddress of the current ISDN outbound call. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.18 | Columncdx6500BRICStatsOutAvConnTm | read-only | mandatory | Average connection time for an outbound call. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.19 | Columncdx6500BRICStatsOutCurConnTm | read-only | mandatory | Current connection time for an outbound call. Current time - Time connection started. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.20 | Columncdx6500BRICStatsOutMinConnTm | read-only | mandatory | Minimum connection time for an outbound call. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.21 | Columncdx6500BRICStatsOutMaxConnTm | read-only | mandatory | Maximum connection time for an outbound call. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.22 | Columncdx6500BRICStatsOutNumSuccCalls | read-only | mandatory | Total number of successful outbound calls. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.23 | Columncdx6500BRICStatsOutNumFailCalls | read-only | mandatory | Total number of unsuccessful outbound calls. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.24 | Columncdx6500BRICStatsMaxSVC | read-only | mandatory | Maximum number of async Switched Virtual Circuit channels. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.25 | Columncdx6500BRICStatsMaxPVC | read-only | mandatory | Maximum number of async Permanent Virtual Circuit channels. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.26 | Columncdx6500BRICStatsCurSVC | read-only | mandatory | Current number of async Switched Virtual Circuit channels. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.27 | Columncdx6500BRICStatsCurPVC | read-only | mandatory | Current number of async Permament Virtual Circuit channels. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.28 | Columncdx6500BRICStatsLastRepReasonCodes | read-only | mandatory | Last Reason codes returned from the network and Last Return code from Transparent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.29 | Columncdx6500BRICStatsLastStatsReset | read-only | mandatory | Time when the node restarted or the stats reset by CTP command . |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.30 | Columncdx6500BRICStatsCharsInTot | read-only | mandatory | Number of characters received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.31 | Columncdx6500BRICStatsCharsOutTot | read-only | mandatory | Number of characters sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.32 | Columncdx6500BRICStatsCharsInPerSec | read-only | mandatory | Average number of characters received per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.33 | Columncdx6500BRICStatsCharsOutPerSec | read-only | mandatory | Average number of characters sent per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.34 | Columncdx6500BRICStatsPktsInTot | read-only | mandatory | Number of packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.35 | Columncdx6500BRICStatsPktsOutTot | read-only | mandatory | Number of packets sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.36 | Columncdx6500BRICStatsPktsInPerSec | read-only | mandatory | Average number of packets received per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.37 | Columncdx6500BRICStatsPktsOutPerSec | read-only | mandatory | Average number of packets sent per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.38 | Columncdx6500BRICStatsFramesInTot | read-only | mandatory | Total number of frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.39 | Columncdx6500BRICStatsFramesOutTot | read-only | mandatory | Total number of frames sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.40 | Columncdx6500BRICStatsFramesInPerSec | read-only | mandatory | Average number of frames received per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.41 | Columncdx6500BRICStatsFramesOutPerSec | read-only | mandatory | Average number of frames sent per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.42 | Columncdx6500BRICStatsInfoFramesIn | read-only | mandatory | Number of Information frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.43 | Columncdx6500BRICStatsInfoFramesOut | read-only | mandatory | Number of Information frames sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.44 | Columncdx6500BRICStatsRNRFramesIn | read-only | mandatory | Number of Receiver Not Ready (RNR) frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.45 | Columncdx6500BRICStatsRNRFramesOut | read-only | mandatory | Number of Receiver Not Ready (RNR) frames sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.46 | Columncdx6500BRICStatsSABMFramesIn | read-only | mandatory | Number of Set Asynchronous Balanced Mode (SABM) frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.47 | Columncdx6500BRICStatsSABMFramesOut | read-only | mandatory | Number of Set Asynchronous Balanced Mode (SABM) frames sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.48 | Columncdx6500BRICStatsDMFramesIn | read-only | mandatory | Number of Disconnect Mode (DM) frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.49 | Columncdx6500BRICStatsDMFramesOut | read-only | mandatory | Number of Disconnect Mode (DM) frames sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.50 | Columncdx6500BRICStatsRRFramesIn | read-only | mandatory | Number of Receiver Ready (RR) frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.51 | Columncdx6500BRICStatsRRFramesOut | read-only | mandatory | Number of Receiver Ready (RR) frames sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.52 | Columncdx6500BRICStatsREJFramesIn | read-only | mandatory | Number of Reject (REJ) frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.53 | Columncdx6500BRICStatsREJFramesOut | read-only | mandatory | Number of Reject (REJ) frames sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.54 | Columncdx6500BRICStatsDISCFramesIn | read-only | mandatory | Number of Disconnect (DISC) frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.55 | Columncdx6500BRICStatsDISCFramesOut | read-only | mandatory | Number of Disconnect (DISC) frames sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.56 | Columncdx6500BRICStatsUAFramesIn | read-only | mandatory | Number of Unnumbered Acknowledgement (UA) frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.57 | Columncdx6500BRICStatsUAFramesOut | read-only | mandatory | Number of Unnumbered Acknowledgement (UA) frames sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.58 | Columncdx6500BRICStatsFRMRFramesIn | read-only | mandatory | Number of Frame Reject (FRMR) frames received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.59 | Columncdx6500BRICStatsFRMRFramesOut | read-only | mandatory | Number of Frame Reject (FRMR) frames sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.60 | Columncdx6500BRICStatsDataPktsIn | read-only | mandatory | Total Number of Data packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.61 | Columncdx6500BRICStatsDataPktsOut | read-only | mandatory | Total Number of Data packets sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.62 | Columncdx6500BRICStatsRRPktsIn | read-only | mandatory | Total Number of Receiver Ready (RR) packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.63 | Columncdx6500BRICStatsRRPktsOut | read-only | mandatory | Total Number of Receiver Ready (RR) packets sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.64 | Columncdx6500BRICStatsRNRPktsIn | read-only | mandatory | Total Number of Receiver Not Ready (RNR) packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.65 | Columncdx6500BRICStatsRNRPktsOut | read-only | mandatory | Total Number of Receiver Not Ready (RNR) packets sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.66 | Columncdx6500BRICStatsRejPktsIn | read-only | mandatory | Total Number of Reject packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.67 | Columncdx6500BRICStatsRejPktsOut | read-only | mandatory | Total Number of Reject packets sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.68 | Columncdx6500BRICStatsCallReqPktsIn | read-only | mandatory | Total Number of Call Request packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.69 | Columncdx6500BRICStatsCallReqPktsOut | read-only | mandatory | Total Number of Call Request packets sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.70 | Columncdx6500BRICStatsCallAccPktsIn | read-only | mandatory | Total Number of Call Accept packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.71 | Columncdx6500BRICStatsCallAccPktsOut | read-only | mandatory | Total Number of Call Acceptt packets sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.72 | Columncdx6500BRICStatsClrReqPktsIn | read-only | mandatory | Total Number of Clear Request packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.73 | Columncdx6500BRICStatsClrReqPktsOut | read-only | mandatory | Total Number of Clear Request packets sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.74 | Columncdx6500BRICStatsClrConfPktsIn | read-only | mandatory | Total Number of Clear Confirmation packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.75 | Columncdx6500BRICStatsClrConfPktsOut | read-only | mandatory | Total Number of Clear Confirmation packets sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.76 | Columncdx6500BRICStatsIntReqPktsIn | read-only | mandatory | Total Number of Interrupt Request packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.77 | Columncdx6500BRICStatsIntReqPktsOut | read-only | mandatory | Total Number of Interrupt Request packets sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.78 | Columncdx6500BRICStatsIntConfPktsIn | read-only | mandatory | Total Number of Interrupt Confirmation packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.79 | Columncdx6500BRICStatsIntConfPktsOut | read-only | mandatory | Total Number of Interrupt Confirmation packets sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.80 | Columncdx6500BRICStatsRstReqPktsIn | read-only | mandatory | Total Number of Reset Request packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.81 | Columncdx6500BRICStatsRstReqPktsOut | read-only | mandatory | Total Number of Reset Request packets sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.82 | Columncdx6500BRICStatsRstConfPktsIn | read-only | mandatory | Total Number of Reset Confirmation packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.83 | Columncdx6500BRICStatsRstConfPktsOut | read-only | mandatory | Total Number of Reset Confirmation packets sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.84 | Columncdx6500BRICStatsRestartReqPktsIn | read-only | mandatory | Total Number of Restart Request packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.85 | Columncdx6500BRICStatsRestartReqPktsOut | read-only | mandatory | Total Number of Restart Request packets sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.86 | Columncdx6500BRICStatsRestartConfPktsIn | read-only | mandatory | Total Number of Restart Confirmation packets received. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.87 | Columncdx6500BRICStatsRestartConfPktsOut | read-only | mandatory | Total Number of Restart Confirmation packets sent. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.88 | Columncdx6500BRICStatsTEI | read-only | mandatory | Terminal Endpoint Identifier provided by the Network subscribing. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.89 | Columncdx6500BRICStatsSAPI | read-only | mandatory | Service Access Point Identifier. A value of 16 is reserved for Packet-mode communication on the D-channel using X.25 level 3. |
| 1.3.6.1.4.1.449.2.1.3.1.1.27.2.1.90 | Columncdx6500BRICStatsNetworkType | read-only | mandatory | Specifies the X.25 Network Type: Transpac, PSS, Datanet, Telenet, Unknown . |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |