BroadworksMaintenance
109 objects
This is the System Management Information structure for the Broadsoft enterprise.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6431 | Identitybroadsoft | This is the System Management Information structure for the Broadsoft enterprise. | ||
| 1.3.6.1.4.1.6431.1 | Nodebroadworks | |||
| 1.3.6.1.4.1.6431.1.1 | Nodecommon | |||
| 1.3.6.1.4.1.6431.1.1.2 | NodemanagedObjects | |||
| 1.3.6.1.4.1.6431.1.1.2.1 | NodemoServerModule | |||
| 1.3.6.1.4.1.6431.1.1.2.1.1 | ScalarbwServerType | read-only | current | Gives the broadworks server type: { Application Server | Network Server | Media Server | Relay Server } |
| 1.3.6.1.4.1.6431.1.1.2.1.2 | ScalarbwRedundancyType | read-only | current | Gives the broadworks server redundancy type: { Primary | Secondary | NotRedundant } |
| 1.3.6.1.4.1.6431.1.1.2.1.3 | ScalarbwActiveSoftwareVersion | read-only | current | Gives the version of the active software version. An operator can change the active software version by setting this field. |
| 1.3.6.1.4.1.6431.1.1.2.1.4 | ScalarbwAdminState | read-write | current | Server admin state. 0- Lock, 1- Locking, 2- Unlock, 3- ShuttingDown, 4- Stopped, 5- Forced Lock |
| 1.3.6.1.4.1.6431.1.1.2.1.5 | ScalarbwOperationalState | read-only | current | Server operational state. 0- Enabled, 1- Disabled |
| 1.3.6.1.4.1.6431.1.1.2.1.6 | ScalarbwResetServer | read-write | current | Remotely reset the BroadWorks server. The reset action kicks in when the counter is set to 1. |
| 1.3.6.1.4.1.6431.1.1.2.1.7 | TablebwSubComponentTable | not-accessible | current | This table exposes some key BroadWorks server sub components. It may or may not be empty depending on the server |
| 1.3.6.1.4.1.6431.1.1.2.1.7.1 | RowbwSubComponentEntry | not-accessible | current | This row contains information about a software component in the system |
| 1.3.6.1.4.1.6431.1.1.2.1.7.1.1 | ColumnbwSubComponentIndex | read-only | current | This integer represents the a software component index in the system |
| 1.3.6.1.4.1.6431.1.1.2.1.7.1.2 | ColumnbwSubComponentName | read-only | current | The name of an exposed subcomponent |
| 1.3.6.1.4.1.6431.1.1.2.1.7.1.3 | ColumnbwSubComponentInfo | read-only | current | Displays status information about the component |
| 1.3.6.1.4.1.6431.1.1.2.1.8 | ScalarbwTargetSoftwareVersion | read-write | current | Gives the target software version. If the server is reset, the active server software version will be updated. |
| 1.3.6.1.4.1.6431.1.1.2.1.9 | ScalarbwRevertBackupLocation | read-write | current | Gives the location of the backup file to use if using the revert option of the reset command. |
| 1.3.6.1.4.1.6431.1.1.2.2 | NodemoSoftwareVersionModule | |||
| 1.3.6.1.4.1.6431.1.1.2.2.1 | ScalarbwUpdateSoftwareVersionTable | read-write | current | This counter is used to reload the installed software table. To do so, just set this register to 1 (reload) |
| 1.3.6.1.4.1.6431.1.1.2.2.2 | TablebwSoftwareVersionTable | not-accessible | current | This table has an entry per software version installed on the server |
| 1.3.6.1.4.1.6431.1.1.2.2.2.1 | RowbwSoftwareVersionEntry | not-accessible | current | This row contains information on a particular braodworks software version installed on the server |
| 1.3.6.1.4.1.6431.1.1.2.2.2.1.1 | ColumnbwSoftwareVersionIndex | read-only | current | This integer represents the a group index in the system |
| 1.3.6.1.4.1.6431.1.1.2.2.2.1.2 | ColumnbwSoftwareVersionName | read-only | current | The name of a software load installed on the server. |
| 1.3.6.1.4.1.6431.1.1.2.2.2.1.3 | ColumnbwSoftwareVersionInstallDate | read-only | current | Installation date for this software version. |
| 1.3.6.1.4.1.6431.1.1.2.2.2.1.4 | ColumnbwSoftwareVersionStatus | read-only | current | The status of a software version. |
| 1.3.6.1.4.1.6431.1.1.2.2.3 | TablebwSoftwarePatchTable | not-accessible | current | This table has an entry per service packs installed for each sofware versions |
| 1.3.6.1.4.1.6431.1.1.2.2.3.1 | RowbwSoftwarePatchEntry | not-accessible | current | This row contains information on a particular braodworks patch installed on the server |
| 1.3.6.1.4.1.6431.1.1.2.2.3.1.1 | ColumnbwSoftwarePatchIndex | read-only | current | This integer an index of a patch installed in the system |
| 1.3.6.1.4.1.6431.1.1.2.2.3.1.2 | ColumnbwSoftwarePatchVersionName | read-only | obsolete | The name of a software load for which this patch applies. This field was obsoleted in BroadWorks release 14.0. |
| 1.3.6.1.4.1.6431.1.1.2.2.3.1.3 | ColumnbwSoftwarePatchName | read-only | current | Patch name. |
| 1.3.6.1.4.1.6431.1.1.2.2.3.1.4 | ColumnbwSoftwarePatchType | read-only | obsolete | Patch type. This field was obsoleted in BroadWorks release 14.0. |
| 1.3.6.1.4.1.6431.1.1.2.2.3.1.5 | ColumnbwSoftwarePatchInstallDate | read-only | obsolete | This field was obsoleted in BroadWorks release 14.0. |
| 1.3.6.1.4.1.6431.1.1.2.2.3.1.6 | ColumnbwSoftwarePatchState | read-only | current | The state of the patch. |
| 1.3.6.1.4.1.6431.1.1.2.2.3.1.7 | ColumnbwSoftwarePatchOperation | read-write | obsolete | This field was obsoleted in BroadWorks release 14.0. |
| 1.3.6.1.4.1.6431.1.1.2.2.3.1.8 | ColumnbwSoftwarePatchBundle | read-only | current | Patch Bundle name of the patch. |
| 1.3.6.1.4.1.6431.1.1.2.2.4 | TablebwSoftwareThirdPartyTable | not-accessible | current | This table has an entry for third party software version used by the BroadWorks server |
| 1.3.6.1.4.1.6431.1.1.2.2.4.1 | RowbwSoftwareThirdPartyEntry | not-accessible | current | This row contains information on an installed 3rd party software version |
| 1.3.6.1.4.1.6431.1.1.2.2.4.1.1 | ColumnbwSoftwareThirdPartyIndex | read-only | current | This integer represents the a group index in the system |
| 1.3.6.1.4.1.6431.1.1.2.2.4.1.2 | ColumnbwSoftwareThirdPartyName | read-only | current | The name of a software load for which this service pack applies |
| 1.3.6.1.4.1.6431.1.1.2.2.4.1.3 | ColumnbwSoftwareThirdPartyVersion | read-only | current | A 3rd party software version id |
| 1.3.6.1.4.1.6431.1.1.2.2.4.1.4 | ColumnbwSoftwareThirdPartyStatus | read-only | current | The status of a 3rd party software version. |
| 1.3.6.1.4.1.6431.1.1.2.2.5 | TablebwSoftwarePatchHistoryTable | not-accessible | current | This table contains information about all operation performed on patches. |
| 1.3.6.1.4.1.6431.1.1.2.2.5.1 | RowbwSoftwarePatchHistoryEntry | not-accessible | current | Entry of the patch history table containing history of operations applied to patches. |
| 1.3.6.1.4.1.6431.1.1.2.2.5.1.1 | ColumnbwSoftwarePatchHistoryIndex | read-only | current | This integer an index of a patch operation history. |
| 1.3.6.1.4.1.6431.1.1.2.2.5.1.2 | ColumnbwSoftwarePatchHistPatchName | read-only | current | The name of the patch against which the operation was applied. |
| 1.3.6.1.4.1.6431.1.1.2.2.5.1.3 | ColumnbwSoftwarePatchHistTimeStamp | read-only | current | The time stamp of the patch operation. |
| 1.3.6.1.4.1.6431.1.1.2.2.5.1.4 | ColumnbwSoftwarePatchHistNewState | read-only | current | The new state of the patch. |
| 1.3.6.1.4.1.6431.1.1.2.2.6 | TablebwSoftwarePatchImpactedFileTable | not-accessible | current | This table contains information about files modified by the patches applied on the system. |
| 1.3.6.1.4.1.6431.1.1.2.2.6.1 | RowbwSoftwarePatchImpactedFileEntry | not-accessible | current | Entry of the patch impacted file table containing information about files modified by patches. |
| 1.3.6.1.4.1.6431.1.1.2.2.6.1.1 | ColumnbwSoftwarePatchImpactedFileIndex | read-only | current | This integer an index of an impacted file/patch name. |
| 1.3.6.1.4.1.6431.1.1.2.2.6.1.2 | ColumnbwSoftwarePatchImpactedFilePatchName | read-only | current | The name of the patch. |
| 1.3.6.1.4.1.6431.1.1.2.2.6.1.3 | ColumnbwSoftwarePatchImpactedFileFileName | read-only | current | The name of an impacted file. |
| 1.3.6.1.4.1.6431.1.1.2.3 | NodemoDeviceModule | |||
| 1.3.6.1.4.1.6431.1.1.2.3.1 | TablebwManagedObjectsTable | not-accessible | current | Table of all sub-managed objects under BroadWorks control |
| 1.3.6.1.4.1.6431.1.1.2.3.1.1 | RowbwManagedObjectsEntry | not-accessible | current | This row contains information on a particular sub-managed object |
| 1.3.6.1.4.1.6431.1.1.2.3.1.1.1 | ColumnbwManagedObjectsIndex | read-only | current | This integer represents the a managed object index in the system |
| 1.3.6.1.4.1.6431.1.1.2.3.1.1.2 | ColumnbwManagedObjectsName | read-only | current | The name of a managed object controlled by BroadWorks |
| 1.3.6.1.4.1.6431.1.1.2.3.1.1.3 | ColumnbwManagedObjectsProtocol | read-only | current | The protocol supported by a managed object controlled by BroadWorks |
| 1.3.6.1.4.1.6431.1.1.2.3.1.1.4 | ColumnbwManagedObjectsType | read-only | current | The type of a managed object controlled by BroadWorks |
| 1.3.6.1.4.1.6431.1.1.2.3.1.1.5 | ColumnbwManagedObjectsAdminState | read-write | current | The administrative state of a managed object controlled by BroadWorks. 0- Lock, 1- locking, 2- Unlock |
| 1.3.6.1.4.1.6431.1.1.2.3.1.1.6 | ColumnbwManagedObjectsOperationalState | read-only | current | The operational state of a managed object controlled by BroadWorks. 0- Enabled, 1- Disabled |
| 1.3.6.1.4.1.6431.1.1.3 | Nodethresholds | |||
| 1.3.6.1.4.1.6431.1.1.3.1 | NodethCounterModule | |||
| 1.3.6.1.4.1.6431.1.1.3.1.1 | TablebwCounterThresholdTable | not-accessible | current | Table of all the thresholds set against counters in the system |
| 1.3.6.1.4.1.6431.1.1.3.1.1.1 | RowbwCounterThresholdEntry | not-accessible | current | This row contains information on a particular counter threshold |
| 1.3.6.1.4.1.6431.1.1.3.1.1.1.1 | ColumnbwCounterThresholdIndex | read-only | current | This integer represents the index of a counter threshold in the system |
| 1.3.6.1.4.1.6431.1.1.3.1.1.1.2 | ColumnbwCounterThresholdDescription | read-write | current | A description for this threshold. |
| 1.3.6.1.4.1.6431.1.1.3.1.1.1.3 | ColumnbwCounterThresholdName | read-write | current | The name of a counter. |
| 1.3.6.1.4.1.6431.1.1.3.1.1.1.4 | ColumnbwCounterThresholdInitialValue | read-write | current | The initial counter threshold value |
| 1.3.6.1.4.1.6431.1.1.3.1.1.1.5 | ColumnbwCounterThresholdOffsetValue | read-write | current | The offset to be added to the current threshold value once an alarm has been sent |
| 1.3.6.1.4.1.6431.1.1.3.1.1.1.6 | ColumnbwCounterThresholdCurrentValue | read-only | current | The threshold value at which the next alarm will be generated |
| 1.3.6.1.4.1.6431.1.1.3.1.1.1.7 | ColumnbwCounterThresholdSeverity | read-write | current | The severity of the alarm to be sent |
| 1.3.6.1.4.1.6431.1.1.3.1.1.1.8 | ColumnbwCounterThresholdControl | read-write | current | This scalar controls the life cycle of the threshold. Setting this counter to create(3) using an unused index creates a row with the specified index. Setting i… |
| 1.3.6.1.4.1.6431.1.1.3.2 | NodethGaugeModule | |||
| 1.3.6.1.4.1.6431.1.1.3.2.1 | TablebwGaugeThresholdTable | not-accessible | current | Table of all the thresholds set against gauges in the system |
| 1.3.6.1.4.1.6431.1.1.3.2.1.1 | RowbwGaugeThresholdEntry | not-accessible | current | This row contains information on a particular gauge threshold |
| 1.3.6.1.4.1.6431.1.1.3.2.1.1.1 | ColumnbwGaugeThresholdIndex | read-only | current | This integer represents the index of a gauge threshold in the system |
| 1.3.6.1.4.1.6431.1.1.3.2.1.1.2 | ColumnbwGaugeThresholdDescription | read-write | current | A description for this threshold. |
| 1.3.6.1.4.1.6431.1.1.3.2.1.1.3 | ColumnbwGaugeThresholdName | read-write | current | The name of a gauge. |
| 1.3.6.1.4.1.6431.1.1.3.2.1.1.4 | ColumnbwGaugeThresholdNotifyLow | read-write | current | The gauge value at which an alarm will be generated when the gauge value reaches or crosses the NotifyHigh level in a rising direction. Subsequent similar cros… |
| 1.3.6.1.4.1.6431.1.1.3.2.1.1.5 | ColumnbwGaugeThresholdNotifyHigh | read-write | current | The gauge value at which an alarm will be generated when the gauge value reaches or crosses the NotifyLow level in a falling direction. Subsequent similar cros… |
| 1.3.6.1.4.1.6431.1.1.3.2.1.1.6 | ColumnbwGaugeThresholdSeverity | read-write | current | The severity of the alarm to be sent |
| 1.3.6.1.4.1.6431.1.1.3.2.1.1.7 | ColumnbwGaugeThresholdControl | read-write | current | This scalar controls the life cycle of the threshold. Setting this gauge to delete(2) removes the entry. |
| 1.3.6.1.4.1.6431.1.1.3.3 | NodethAlarmModule | |||
| 1.3.6.1.4.1.6431.1.1.3.3.1 | TablebwAlarmThresholdTable | not-accessible | current | Table of all the thresholds set against alarms in the system |
| 1.3.6.1.4.1.6431.1.1.3.3.1.1 | RowbwAlarmThresholdEntry | not-accessible | current | This row contains information on a particular alarm threshold |
| 1.3.6.1.4.1.6431.1.1.3.3.1.1.1 | ColumnbwAlarmThresholdIndex | read-only | current | This integer represents the index of an alarm threshold in the system |
| 1.3.6.1.4.1.6431.1.1.3.3.1.1.2 | ColumnbwAlarmThresholdName | read-write | current | The name of an alarm or DEFAULT if the threshold applies to all alarms in the system |
| 1.3.6.1.4.1.6431.1.1.3.3.1.1.3 | ColumnbwAlarmThresholdMaxNumTrapsPerTimePeriod | read-write | current | The maximum number of traps that the system outputs per sliding time period. If set to 0 (zero), the alarm is suppressed and the system does not output any tra… |
| 1.3.6.1.4.1.6431.1.1.3.3.1.1.4 | ColumnbwAlarmThresholdTimePeriodInSeconds | read-write | current | The time period used for threshold calculation, in seconds. |
| 1.3.6.1.4.1.6431.1.1.3.3.1.1.5 | ColumnbwAlarmThresholdProblemTextVarNum1 | read-write | current | To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name… |
| 1.3.6.1.4.1.6431.1.1.3.3.1.1.6 | ColumnbwAlarmThresholdProblemTextVarNum2 | read-write | current | To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name… |
| 1.3.6.1.4.1.6431.1.1.3.3.1.1.7 | ColumnbwAlarmThresholdProblemTextVarNum3 | read-write | current | To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name… |
| 1.3.6.1.4.1.6431.1.1.3.3.1.1.8 | ColumnbwAlarmThresholdProblemTextVarNum4 | read-write | current | To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name… |
| 1.3.6.1.4.1.6431.1.1.3.3.1.1.9 | ColumnbwAlarmThresholdProblemTextVarNum5 | read-write | current | To further refine a threshold, specify the position number of the variable data within the alarm problem text (1, 2, 3, etc.) that together with the alarm name… |
| 1.3.6.1.4.1.6431.1.1.3.3.1.1.10 | ColumnbwAlarmThresholdMinimumSeverity | read-write | current | This is the minimum alarm severity under which alarms start to be discarded. |
| 1.3.6.1.4.1.6431.1.1.3.3.1.1.11 | ColumnbwAlarmThresholdControl | read-write | current | This scalar controls the life cycle of the threshold. Setting this threshold to create(3) using an unused index creates a row with the specified index. Setting… |
| 1.3.6.1.4.1.6431.1.1.10 | NodereservedModule | |||
| 1.3.6.1.4.1.6431.1.1.10.1 | ScalarbwReservedScalar | read-only | current | This is a reserved counter |
| 1.3.6.1.4.1.6431.1.1.20 | NodebwMtcMibConformance | |||
| 1.3.6.1.4.1.6431.1.1.20.1 | NodebwMtcMibGroups | |||
| 1.3.6.1.4.1.6431.1.1.20.1.1 | GroupbwMoServerGroup | current | This group defines managed object server attributes. | |
| 1.3.6.1.4.1.6431.1.1.20.1.2 | GroupbwMoSoftwareVersionsGroup | current | This group defines the software version attributes for the managed object. | |
| 1.3.6.1.4.1.6431.1.1.20.1.3 | GroupbwMoDeviceGroup | current | This group defines the counters used to manage the access or network devices monitored by this managed object. | |
| 1.3.6.1.4.1.6431.1.1.20.1.4 | GroupbwMoThresholdsGroup | current | This group defines the threshold control for this managed object. | |
| 1.3.6.1.4.1.6431.1.1.20.1.10 | GroupbwMoReserveGroup | current | MIB reserved section. | |
| 1.3.6.1.4.1.6431.1.1.20.2 | NodebwMtcMibCompliancy | |||
| 1.3.6.1.4.1.6431.1.1.20.2.1 | CompliancebwMoBasicCompliance | current | BroadWorks Common managed object MIB compliance |