CABH-CAP-MIB
43 objects
This MIB module supplies the basic management objects for the CableHome Addressing Portal (CAP) portion of the PS.
Imported Objects
| CLAB-DEF-MIB | clabProjCableHome |
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime PhysAddress RowStatus TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.4.3 | IdentitycabhCapMib | This MIB module supplies the basic management objects for the CableHome Addressing Portal (CAP) portion of the PS. | ||
| 1.3.6.1.4.1.4491.2.4.3.1 | NodecabhCapObjects | |||
| 1.3.6.1.4.1.4491.2.4.3.1.1 | NodecabhCapBase | |||
| 1.3.6.1.4.1.4491.2.4.3.1.1.1 | ScalarcabhCapTcpTimeWait | read-write | current | This object is the maximum inactivity time to wait before assuming TCP session is terminated. It has no relation to the TCP session TIME_WAIT state referred to… |
| 1.3.6.1.4.1.4491.2.4.3.1.1.2 | ScalarcabhCapUdpTimeWait | read-write | current | The inactivity time to wait before destroying CAP mappings for UDP. |
| 1.3.6.1.4.1.4491.2.4.3.1.1.3 | ScalarcabhCapIcmpTimeWait | read-write | current | The inactivity time to wait before destroying CAP mappings for ICMP. |
| 1.3.6.1.4.1.4491.2.4.3.1.1.4 | ScalarcabhCapPrimaryMode | read-write | current | The Primary Packet-handling Mode of the Portal Services logical element (PS) of a CableHome compliant residential gateway device. This object configures operat… |
| 1.3.6.1.4.1.4491.2.4.3.1.1.5 | ScalarcabhCapSetToFactory | read-write | current | Reading this object always returns false(2). When the cabhCapSetToFactory object is set to true(1), the PS must take the following actions: 1. Clear all entrie… |
| 1.3.6.1.4.1.4491.2.4.3.1.1.6 | ScalarcabhCapLastSetToFactory | read-only | current | The value of sysUpTime when cabhCapSetToFactory was last set to true. Zero if never reset. |
| 1.3.6.1.4.1.4491.2.4.3.1.1.7 | ScalarcabhCapUpnpPortForwardingEnable | read-write | current | This MIB is effective only when the PS is performing NAPT. If this MIB object is set to false(2), the PS MUST disable the UPnP WANIpConnection Service in the C… |
| 1.3.6.1.4.1.4491.2.4.3.1.1.8 | ScalarcabhCapUpnpTimeWait | read-write | current | The inactivity time to wait before destroying CAP mappings created by UPnP control points. The value of 0 indicates inactivity time wait of infinity, i.e. a UP… |
| 1.3.6.1.4.1.4491.2.4.3.1.2 | NodecabhCapMap | |||
| 1.3.6.1.4.1.4491.2.4.3.1.2.1 | TablecabhCapMappingTable | not-accessible | current | This table contains IP address mappings between private network addresses, or network addresses and port numbers/ICMP Identifiers, assigned to devices on the s… |
| 1.3.6.1.4.1.4491.2.4.3.1.2.1.1 | RowcabhCapMappingEntry | not-accessible | current | List of the private IP (LAN) address - to - cable operator assigned IP (WAN) address mappings stored in the PS and used by the PS to make packet forwarding dec… |
| 1.3.6.1.4.1.4491.2.4.3.1.2.1.1.1 | ColumncabhCapMappingIndex | not-accessible | current | The Index into the CAP Mapping Table. |
| 1.3.6.1.4.1.4491.2.4.3.1.2.1.1.2 | ColumncabhCapMappingWanAddrType | read-create | current | The IP address type assigned on the WAN side. |
| 1.3.6.1.4.1.4491.2.4.3.1.2.1.1.3 | ColumncabhCapMappingWanAddr | read-create | current | The IP address assigned by the cable operator's address (DHCP) server, and comprising the WAN-side IP address of the CAP Mapping tuple. This object is populate… |
| 1.3.6.1.4.1.4491.2.4.3.1.2.1.1.4 | ColumncabhCapMappingWanPort | read-create | current | The TCP/UDP port number or ICMP Identifier on the WAN side. A port number/Identifier of 0 indicates either a NAT or a DMZ mapping. A non-zero port number/Ident… |
| 1.3.6.1.4.1.4491.2.4.3.1.2.1.1.5 | ColumncabhCapMappingLanAddrType | read-create | current | The IP address type assigned on the LAN side. |
| 1.3.6.1.4.1.4491.2.4.3.1.2.1.1.6 | ColumncabhCapMappingLanAddr | read-create | current | The IP address of the LAN-Trans IP Device. This object is populated either dynamically as a result of LAN-to-WAN outbound traffic or statically by the cable op… |
| 1.3.6.1.4.1.4491.2.4.3.1.2.1.1.7 | ColumncabhCapMappingLanPort | read-create | current | The TCP/UDP port number or ICMP Identifier on the LAN side. A port number/Identifier of 0 indicates either a DMZ mapping or a NAT mapping. A non-zero port numb… |
| 1.3.6.1.4.1.4491.2.4.3.1.2.1.1.8 | ColumncabhCapMappingMethod | read-only | current | Indicates how this mapping was created. Static means that it was provisioned, and dynamic means that it was handled by the PS itself. upnp (3) means that the C… |
| 1.3.6.1.4.1.4491.2.4.3.1.2.1.1.9 | ColumncabhCapMappingProtocol | read-create | current | The protocol for this mapping entry. The value of other(1) represents a protocol other than ICMP, TCP, and UDP. Thus, when the value other(1) is specified for … |
| 1.3.6.1.4.1.4491.2.4.3.1.2.1.1.10 | ColumncabhCapMappingRowStatus | read-create | current | The RowStatus interlock for the creation and deletion of a cabhCapMappingTable entry. Changing the value of the IP address or port number columns of the CAP Ma… |
| 1.3.6.1.4.1.4491.2.4.3.1.2.1.1.11 | ColumncabhCapMappingNumPorts | read-create | current | This object represents number of ports available for port translation on both LAN and WAN side. When both cabhCapMappingWanPort and cabhCapMappingLanPort are s… |
| 1.3.6.1.4.1.4491.2.4.3.1.2.1.1.12 | ColumncabhCapMappingRowDescr | read-create | current | A string value that can be used to describe the purpose or attributes of the CAP Mapping entry. |
| 1.3.6.1.4.1.4491.2.4.3.1.2.1.1.13 | ColumncabhCapMappingCreateTime | read-only | current | For dynamic(2) and upnp(3) CAP mapping entries the PS MUST set this MIB with date and time when the entry is created. The PS MUST set the value of this MIB to … |
| 1.3.6.1.4.1.4491.2.4.3.1.2.1.1.14 | ColumncabhCapMappingLastUpdateTime | read-only | current | The PS MUST set the value of this MIB to zero valued 11 byte string for static CAP mapping entries. For dynamic(2) CAP Mapping entries, the PS MUST set the val… |
| 1.3.6.1.4.1.4491.2.4.3.1.2.1.1.15 | ColumncabhCapMappingDuration | read-create | current | When a value greater than zero is assigned to this object, the PS MUST remove the CAP entry after the time duration, represented by this object, elapses starti… |
| 1.3.6.1.4.1.4491.2.4.3.1.2.1.1.16 | ColumncabhCapMappingRemoteHostAddrType | read-only | current | The IP address type for a remote host on the WAN side. |
| 1.3.6.1.4.1.4491.2.4.3.1.2.1.1.17 | ColumncabhCapMappingRemoteHostAddr | read-only | current | The IP address of the remote host for a CAP mapping entry. The packet traversing through the PS is either originated from or is destined to this remote host. T… |
| 1.3.6.1.4.1.4491.2.4.3.1.2.1.1.18 | ColumncabhCapMappingEnable | read-only | current | This MIB allows the PS to enable or disable a particular CAP mapping entry. When this MIB is set to true(1) for a CAP mapping entry, the PS MUST correctly rout… |
| 1.3.6.1.4.1.4491.2.4.3.1.2.2 | TablecabhCapPassthroughTable | not-accessible | current | This table contains hardware addresses of LAN IP Devices for which the PS will bridge traffic at OSI Layer 2. |
| 1.3.6.1.4.1.4491.2.4.3.1.2.2.1 | RowcabhCapPassthroughEntry | not-accessible | current | List of hardware addresses of LAN IP Devices for which the PS will bridge traffic at OSI Layer 2. |
| 1.3.6.1.4.1.4491.2.4.3.1.2.2.1.1 | ColumncabhCapPassthroughIndex | not-accessible | current | The index into the CAP Passthrough Table. |
| 1.3.6.1.4.1.4491.2.4.3.1.2.2.1.2 | ColumncabhCapPassthroughMacAddr | read-create | current | Hardware address of the LAN IP Device for which the PS MUST bridge traffic at OSI Layer 2. |
| 1.3.6.1.4.1.4491.2.4.3.1.2.2.1.3 | ColumncabhCapPassthroughRowStatus | read-create | current | The RowStatus interlock for the creation and deletion of a cabhCapPassthroughTable entry. Any writable object in each row can be modified at any time while the… |
| 1.3.6.1.4.1.4491.2.4.3.2.0 | NodecabhCapNotification | |||
| 1.3.6.1.4.1.4491.2.4.3.3 | NodecabhCapConformance | |||
| 1.3.6.1.4.1.4491.2.4.3.3.1 | NodecabhCapCompliances | |||
| 1.3.6.1.4.1.4491.2.4.3.3.1.1 | CompliancecabhCapBasicCompliance | current | The compliance statement for devices that implement the CableHome Portal Services functionality. | |
| 1.3.6.1.4.1.4491.2.4.3.3.2 | NodecabhCapGroups | |||
| 1.3.6.1.4.1.4491.2.4.3.3.2.1 | GroupcabhCapGroup | current | Group of objects for CableHome CAP MIB. |