CABH-IETF-CAP-MIB
34 objects
This MIB module supplies the basic management objects for the CableHome Addressing Portal (CAP) portion of the PS database. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC xxxx; see the RFC itself for full legal notices.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | mib-2 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | PhysAddress RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1 | IdentitycabhCapMib | This MIB module supplies the basic management objects for the CableHome Addressing Portal (CAP) portion of the PS database. Copyright (C) The Internet Society … | ||
| 1.3.6.1.2.1.1 | NodecabhCapObjects | |||
| 1.3.6.1.2.1.1.1 | NodecabhCapBase | |||
| 1.3.6.1.2.1.1.1.1 | ScalarcabhCapTcpTimeWait | read-write | current | This object is the maximum inactivity time to wait before assuming TCP session is terminated. It has no relation to the TCP session TIME_WAIT state referred to… |
| 1.3.6.1.2.1.1.1.2 | ScalarcabhCapUdpTimeWait | read-write | current | The inactivity time to wait before destroying CAP mappings for UDP. |
| 1.3.6.1.2.1.1.1.3 | ScalarcabhCapIcmpTimeWait | read-write | current | The inactivity time to wait before destroying CAP mappings for ICMP. |
| 1.3.6.1.2.1.1.1.4 | ScalarcabhCapPrimaryMode | read-write | current | The Primary Packet Handling Mode to be used. |
| 1.3.6.1.2.1.1.1.5 | ScalarcabhCapSetToFactory | read-write | current | Reading this object always returns false(2). When the cabhCapSetToFactory object is set to true(1), the PS must take the following actions: 1. Clear all entrie… |
| 1.3.6.1.2.1.1.1.6 | ScalarcabhCapLastSetToFactory | read-only | current | The value of sysUpTime when cabhCapSetToFactory was last set to true. Zero if never reset. |
| 1.3.6.1.2.1.1.2 | NodecabhCapMap | |||
| 1.3.6.1.2.1.1.2.1 | TablecabhCapMappingTable | not-accessible | current | This table contains IP address mappings between private network addresses, or network addresses and port numbers/ICMP sequence numbers, assigned to devices on … |
| 1.3.6.1.2.1.1.2.1.1 | RowcabhCapMappingEntry | not-accessible | current | List of the private IP (LAN) address - to - cable operator assigned IP (WAN) address mappings stored in the PS and used by the PS to make packet forwarding dec… |
| 1.3.6.1.2.1.1.2.1.1.1 | ColumncabhCapMappingIndex | not-accessible | current | The Index into the CAP Mapping Table. |
| 1.3.6.1.2.1.1.2.1.1.2 | ColumncabhCapMappingWanAddrType | read-create | current | The IP address type assigned on the WAN side |
| 1.3.6.1.2.1.1.2.1.1.3 | ColumncabhCapMappingWanAddr | read-create | current | The IP address assigned by the cable operator's address (DHCP) server, and comprising the WAN-side IP address of the CAP Mapping tuple. This object is populate… |
| 1.3.6.1.2.1.1.2.1.1.4 | ColumncabhCapMappingWanPort | read-create | current | The TCP/UDP port number or ICMP sequence number on the WAN side. A port number of 0 indicates a NAT mapping. A non-zero port number indicates an NAPT mapping. |
| 1.3.6.1.2.1.1.2.1.1.5 | ColumncabhCapMappingLanAddrType | read-create | current | The IP address type assigned on the LAN side. |
| 1.3.6.1.2.1.1.2.1.1.6 | ColumncabhCapMappingLanAddr | read-create | current | The IP address assigned by the DHCP server function of the PS (CableHome DHCP Server, CDS), and comprising the LAN-side IP address of the CAP Mapping tuple. Th… |
| 1.3.6.1.2.1.1.2.1.1.7 | ColumncabhCapMappingLanPort | read-create | current | The TCP/UDP port number or ICMP sequence number on the LAN side. A port number/sequence number of 0 indicates a NAT mapping. A non-zero port number/sequence nu… |
| 1.3.6.1.2.1.1.2.1.1.8 | ColumncabhCapMappingMethod | read-only | current | Indicates how this mapping was created. Static means that it was provisioned, and dynamic means that it was handled by the PS itself. |
| 1.3.6.1.2.1.1.2.1.1.9 | ColumncabhCapMappingProtocol | read-create | current | The protocol for this mapping. |
| 1.3.6.1.2.1.1.2.1.1.10 | ColumncabhCapMappingRowStatus | read-create | current | The RowStatus interlock for the creation and deletion of a cabhCapMappingTable entry. Changing the value of the IP address or port number columns of the CAP Ma… |
| 1.3.6.1.2.1.1.2.2 | TablecabhCapPassthroughTable | not-accessible | current | This table contains MAC addresses for LAN-IP Devices which are configured as passthrough mode. |
| 1.3.6.1.2.1.1.2.2.1 | RowcabhCapPassthroughEntry | not-accessible | current | List of hardware addresses of LAN IP Devices which are configured for passthrough mode. |
| 1.3.6.1.2.1.1.2.2.1.1 | ColumncabhCapPassthroughIndex | not-accessible | current | The index into the CAP Passthrough Table. |
| 1.3.6.1.2.1.1.2.2.1.2 | ColumncabhCapPassthroughMacAddr | read-create | current | Hardware address of the LAN-IP Device to be configured as passthrough mode. |
| 1.3.6.1.2.1.1.2.2.1.3 | ColumncabhCapPassthroughRowStatus | read-create | current | The RowStatus interlock for the creation and deletion of a cabhCapPassthroughTable entry. Any writable object in each row can be modified at any time while the… |
| 1.3.6.1.2.1.2.0 | NodecabhCapNotification | |||
| 1.3.6.1.2.1.3 | NodecabhCapConformance | |||
| 1.3.6.1.2.1.3.1 | NodecabhCapCompliances | |||
| 1.3.6.1.2.1.3.1.1 | CompliancecabhCapBasicCompliance | current | The compliance statement for devices that implement the CableHome Portal Services functionality | |
| 1.3.6.1.2.1.3.2 | NodecabhCapGroups | |||
| 1.3.6.1.2.1.3.2.1 | GroupcabhCapGroup | current | Group of objects for CableHome CAP MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CabhCapPacketMode | INTEGER { napt(1), nat(2), passthrough(3) } | current | The data type established when a binding/mapping is established. |