CABH-IETF-CTP-MIB
45 objects
This MIB module defines the diagnostic controls offered by the CableHome Test Portal (CTP). Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC xxxx; see the RFC itself for full legal notices.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | mib-2 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1 | IdentitycabhCtpMib | This MIB module defines the diagnostic controls offered by the CableHome Test Portal (CTP). Copyright (C) The Internet Society (2003). This version of this MIB… | ||
| 1.3.6.1.2.1.1 | NodecabhCtpObjects | |||
| 1.3.6.1.2.1.1.1 | NodecabhCtpBase | |||
| 1.3.6.1.2.1.1.1.1 | ScalarcabhCtpSetToFactory | read-write | current | Setting this object to true(1) causes all the tables in the CTP MIB to be cleared, and all CTP MIB objects with default values set back to those default values… |
| 1.3.6.1.2.1.1.1.2 | ScalarcabhCtpLastSetToFactory | read-only | current | The value of sysUpTime when cabhCtpSetToFactory was last set to true. Zero if never reset. |
| 1.3.6.1.2.1.1.2 | NodecabhCtpConnSpeed | |||
| 1.3.6.1.2.1.1.2.1 | ScalarcabhCtpConnSrcIpType | read-write | current | The IP Address type used as the source address for the Connection Speed Test. |
| 1.3.6.1.2.1.1.2.2 | ScalarcabhCtpConnSrcIp | read-write | current | The IP Address used as the source address for the Connection Speed Test. The type of this address is specified by cabhCtpConnSrcIpType. The default value is th… |
| 1.3.6.1.2.1.1.2.3 | ScalarcabhCtpConnDestIpType | read-write | current | The IP Address Type for the CTP Connection Speed Tool destination address. |
| 1.3.6.1.2.1.1.2.4 | ScalarcabhCtpConnDestIp | read-write | current | The IP Address used as the destination address for the Connection Speed Test. The type of this address is specified by cabhCtpConnDestIpType |
| 1.3.6.1.2.1.1.2.5 | ScalarcabhCtpConnProto | read-write | current | The protocol used in the Connection Speed Test. TCP testing is optional. |
| 1.3.6.1.2.1.1.2.6 | ScalarcabhCtpConnNumPkts | read-write | current | The number of packets the CTP is to send when triggered to execute the Connection Speed Tool. |
| 1.3.6.1.2.1.1.2.7 | ScalarcabhCtpConnPktSize | read-write | current | The size of the test frames. |
| 1.3.6.1.2.1.1.2.8 | ScalarcabhCtpConnTimeOut | read-write | current | The timeout value for the response. A value of zero indicates no time out and can be used for TCP only. |
| 1.3.6.1.2.1.1.2.9 | ScalarcabhCtpConnControl | read-write | current | The control for the Connection Speed Tool. Setting this object to start(1) causes the Connection Speed Tool to execute. Setting this object to abort(2) causes … |
| 1.3.6.1.2.1.1.2.10 | ScalarcabhCtpConnStatus | read-only | current | The status of the Connection Speed Tool. |
| 1.3.6.1.2.1.1.2.11 | ScalarcabhCtpConnPktsSent | read-only | current | The number of packets the CTP sent after it was triggered to execute the Connection Speed Tool. |
| 1.3.6.1.2.1.1.2.12 | ScalarcabhCtpConnPktsRecv | read-only | current | The number of packets the CTP received after it executed the Connection Speed Tool. |
| 1.3.6.1.2.1.1.2.13 | ScalarcabhCtpConnRTT | read-only | current | The resulting round trip time for the set of packets sent to and received from the target LAN IP Device. |
| 1.3.6.1.2.1.1.2.14 | ScalarcabhCtpConnThroughput | read-only | current | The average round-trip throughput measured in kilobits per second. |
| 1.3.6.1.2.1.1.3 | NodecabhCtpPing | |||
| 1.3.6.1.2.1.1.3.1 | ScalarcabhCtpPingSrcIpType | read-write | current | The IP Address Type for CTP Ping Tool source address. |
| 1.3.6.1.2.1.1.3.2 | ScalarcabhCtpPingSrcIp | read-write | current | The IP Address used as the source address for the Ping Test. The type of this address is specified by cabhCtpPingSrcIpType. The default value is the value of C… |
| 1.3.6.1.2.1.1.3.3 | ScalarcabhCtpPingDestIpType | read-write | current | The IP Address Type for the CTP Ping Tool destination address. |
| 1.3.6.1.2.1.1.3.4 | ScalarcabhCtpPingDestIp | read-write | current | The Destination IP Address used as the destination address for the Ping Test. |
| 1.3.6.1.2.1.1.3.5 | ScalarcabhCtpPingNumPkts | read-write | current | The number of packets to send to each host. |
| 1.3.6.1.2.1.1.3.6 | ScalarcabhCtpPingPktSize | read-write | current | The size of the test frames. |
| 1.3.6.1.2.1.1.3.7 | ScalarcabhCtpPingTimeBetween | read-write | current | The time between sending one ping and the next. |
| 1.3.6.1.2.1.1.3.8 | ScalarcabhCtpPingTimeOut | read-write | current | The time out for ping response (ICMP reply) for a single transmitted ping message (ICMP request). |
| 1.3.6.1.2.1.1.3.9 | ScalarcabhCtpPingControl | read-write | current | The control for the Ping Tool. Setting this object to start(1) causes the Ping Tool to execute. Setting this object to abort(2) causes the Ping Tool to stop ru… |
| 1.3.6.1.2.1.1.3.10 | ScalarcabhCtpPingStatus | read-only | current | The status of the Ping Tool. |
| 1.3.6.1.2.1.1.3.11 | ScalarcabhCtpPingNumSent | read-only | current | The number of Pings sent |
| 1.3.6.1.2.1.1.3.12 | ScalarcabhCtpPingNumRecv | read-only | current | The number of pings received. |
| 1.3.6.1.2.1.1.3.13 | ScalarcabhCtpPingAvgRTT | read-only | current | The resulting average of round trip times for acknowledged packets. |
| 1.3.6.1.2.1.1.3.14 | ScalarcabhCtpPingMaxRTT | read-only | current | The resulting maximum of round trip times for acknowledged packets. |
| 1.3.6.1.2.1.1.3.15 | ScalarcabhCtpPingMinRTT | read-only | current | The resulting minimum of round trip times for acknowledged packets. |
| 1.3.6.1.2.1.1.3.16 | ScalarcabhCtpPingNumIcmpError | read-only | current | Number of ICMP errors. |
| 1.3.6.1.2.1.1.3.17 | ScalarcabhCtpPingIcmpError | read-only | current | The last ICMP error. |
| 1.3.6.1.2.1.2 | NodecabhCtpNotification | |||
| 1.3.6.1.2.1.2.0 | NodecabhCtpNotifications | |||
| 1.3.6.1.2.1.3 | NodecabhCtpConformance | |||
| 1.3.6.1.2.1.3.1 | NodecabhCtpCompliances | |||
| 1.3.6.1.2.1.3.1.3 | CompliancecabhCtpBasicCompliance | current | The compliance statement for devices that implement Portal Service feature. | |
| 1.3.6.1.2.1.3.2 | NodecabhCtpGroups | |||
| 1.3.6.1.2.1.3.2.1 | GroupcabhCtpGroup | current | Group of objects for CableHome CTP MIB. |