MIB Viewer

CALIX-EOAM-EXT-MIB

158 objects
A MIB module that extends the support of Ethernet OAM standards. Extensions are made to IEEE 802.3ah MIB for Link OAM or EFM (Ethernet First Mile) functionality, IEEE 802.1ag MIB for Service OAM or CFM (Connection Fault Management) functionality, including ITU-T Y.1731 entities. This version is compatible with Interport SOAM release 3.0.
OIDNameAccessStatusDescription
1.3.6.1.4.1.6321.1.99IdentitycalixEoamExtMIBA MIB module that extends the support of Ethernet OAM standards. Extensions are made to IEEE 802.3ah MIB for Link OAM or EFM (Ethernet First Mile) functionalit…
1.3.6.1.4.1.6321.1.99.1NodecalixEoamExtConfig
1.3.6.1.4.1.6321.1.99.1.1TablecalixSoamExtMegTablenot-accessiblecurrentThis table contains all ITU-T Y.1731 MEG entries in the system.
1.3.6.1.4.1.6321.1.99.1.1.1RowcalixSoamExtMegEntrynot-accessiblecurrentThe ITU-T Y.1731 MEG entry.
1.3.6.1.4.1.6321.1.99.1.1.1.1ColumncalixSoamExtMegIdentifiernot-accessiblecurrentIndex of the MEG entry in the MEG table. There is a common indexing space shared between MAs (IEEE 802.1ag) and MEGs(ITU-T Y.1731).
1.3.6.1.4.1.6321.1.99.1.1.1.2ColumncalixSoamExtMegNameread-createcurrentTextual name of the MEG.
1.3.6.1.4.1.6321.1.99.1.1.1.3ColumncalixSoamExtMegLevelread-createcurrentLevel for the MEG.
1.3.6.1.4.1.6321.1.99.1.1.1.4ColumncalixSoamExtMegCcmIntervalread-createcurrentInterval between CCM transmissions to be used by all MEPs in the MEG.
1.3.6.1.4.1.6321.1.99.1.1.1.5ColumncalixSoamExtMegVidread-createcurrentThe Primary VLAN ID with which the MEG is associated, or 0 if the MEG is not attached to any VID. If the MEG is associated with more than one VID, the dot1agCf…
1.3.6.1.4.1.6321.1.99.1.1.1.6ColumncalixSoamExtMegAutoDiscoveryread-createcurrentSpecifies if MEP autodiscovery feature is enabled or not for this particular MEG.
1.3.6.1.4.1.6321.1.99.1.1.1.7ColumncalixSoamExtMegAutoDiscoveryTimeoutread-createcurrentThe timeout value for removal of peer MEPs added through autodetection if no CCM frames are received from that peer MEP.
1.3.6.1.4.1.6321.1.99.1.1.1.8ColumncalixSoamExtMegCciInterworkingread-createcurrentSpecifies if IEEE 802.1ag compatibility mode is enabled on this MEG.
1.3.6.1.4.1.6321.1.99.1.1.1.9ColumncalixSoamExtMegIdPermissionread-createcurrentEnumerated value indicating what, if anything, is to be included in the Sender ID TLV transmitted by MPs configured in this MEG. The value sendIdDefer is not a…
1.3.6.1.4.1.6321.1.99.1.1.1.10ColumncalixSoamExtMegRowStatusread-createcurrentThe status of the row. This field should be used to create or remove a MEG from the system.
1.3.6.1.4.1.6321.1.99.1.2TablecalixSoamExtMipTablenot-accessiblecurrentThis table contains all MIPs configured in the system.
1.3.6.1.4.1.6321.1.99.1.2.1RowcalixSoamExtMipEntrynot-accessiblecurrentEach MIP in the system shall have an entry in this table.
1.3.6.1.4.1.6321.1.99.1.2.1.1ColumncalixSoamExtMipIdentifiernot-accessiblecurrentUnique numerical identifier for the MIP.
1.3.6.1.4.1.6321.1.99.1.2.1.3ColumncalixSoamExtMipIfIndexread-createcurrentThis attributes specifies the interface index for the port on which the MIP is attached.
1.3.6.1.4.1.6321.1.99.1.2.1.4ColumncalixSoamExtMipAdminStateread-createcurrentAdministrative state of the MIP.
1.3.6.1.4.1.6321.1.99.1.2.1.5ColumncalixSoamExtMipMacAddressread-onlycurrentMAC address of the MIP.
1.3.6.1.4.1.6321.1.99.1.2.1.6ColumncalixSoamExtMipResetStatread-createcurrentTrue indicates MIPs statistics should be cleared.
1.3.6.1.4.1.6321.1.99.1.2.1.7ColumncalixSoamExtMipRowStatusread-createcurrentThe status of the row. This attribute is used to create and delete a MIP in the system.
1.3.6.1.4.1.6321.1.99.1.3TablecalixSoamExtMipStatsTablenot-accessiblecurrentThis table contains Stats for all MIPs configured in the system.
1.3.6.1.4.1.6321.1.99.1.3.1RowcalixSoamExtMipStatsEntrynot-accessiblecurrentStats for a MIP entity.
1.3.6.1.4.1.6321.1.99.1.3.1.1ColumncalixSoamExtMipStatsDirectionread-createcurrentThe direction in which the MHF faces for statistics.
1.3.6.1.4.1.6321.1.99.1.3.1.2ColumncalixSoamExtMipStatsLbmInread-onlycurrentThe number of LBMs received by this MIP.
1.3.6.1.4.1.6321.1.99.1.3.1.3ColumncalixSoamExtMipStatsLbrOutread-onlycurrentThe number of LBRs sent by this MIP.
1.3.6.1.4.1.6321.1.99.1.3.1.4ColumncalixSoamExtMipStatsLtmInread-onlycurrentThe number of LTMs received by this MIP.
1.3.6.1.4.1.6321.1.99.1.3.1.5ColumncalixSoamExtMipStatsLtmForwardedread-onlycurrentThe number of LTM messages forwarded by MIP.
1.3.6.1.4.1.6321.1.99.1.3.1.6ColumncalixSoamExtMipStatsLtrOutread-onlycurrentThe number of LTR responses sent by this MIP.
1.3.6.1.4.1.6321.1.99.1.3.1.7ColumncalixSoamExtMipStatsLbmInvalidSenderIdread-onlycurrentThe total number of received LBM with a bad Sender ID.
1.3.6.1.4.1.6321.1.99.1.3.1.8ColumncalixSoamExtMipStatsDiscardsread-onlycurrentThe total number of discarded OAM frames.
1.3.6.1.4.1.6321.1.99.1.3.1.9ColumncalixSoamExtMipStatsResetStatread-createcurrentTrue indicates MEP statistics should be cleared.
1.3.6.1.4.1.6321.1.99.1.4TablecalixSoamExtMepDmExtTablenot-accessiblecurrentThis table contains extended attributes and counters for the standard MEP table dot1agCfmMepTable, in order to support Delay Measurement and Delay Variation Me…
1.3.6.1.4.1.6321.1.99.1.4.1RowcalixSoamExtMepDmExtEntrynot-accessiblecurrentMEP Extension (DM and DVM) table for a given MEP object.
1.3.6.1.4.1.6321.1.99.1.4.1.1ColumncalixSoamExtMepDmExtActiveread-createcurrentUse to enable delay measurement.
1.3.6.1.4.1.6321.1.99.1.4.1.2ColumncalixSoamExtMepDmExtDestMacAddressread-createcurrentThe Target MAC Address field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column calixSoamExtMepDmExtDes…
1.3.6.1.4.1.6321.1.99.1.4.1.3ColumncalixSoamExtMepDmExtDestMepIdread-createcurrentThe MEP ID of remote MEP to which the DM is to be sent. This address will be used if the value of the column calixSoamExtMepDmExtDestIsMepId is 'True'.
1.3.6.1.4.1.6321.1.99.1.4.1.4ColumncalixSoamExtMepDmExtDestIsMepIdread-createcurrentTrue indicates that MEP ID of the target MEP is used for DM transmission. False indicates that unicast destination MAC address of the target MEP is used for DM…
1.3.6.1.4.1.6321.1.99.1.4.1.5ColumncalixSoamExtMepDmExtClassOfServiceread-createcurrentSpecifies the class of service for which the DMM is requested. A value of 8 indicates a full MEP level (CoS agnostic) request.
1.3.6.1.4.1.6321.1.99.1.4.1.6ColumncalixSoamExtMepDmExtDmPeriodread-createcurrentSpecifies the delay between two consecutive DM messages.
1.3.6.1.4.1.6321.1.99.1.4.1.7ColumncalixSoamExtMepDmExtMaxRtdThrSetread-createcurrentThe maximum round trip delay threshold upon which an alarm is to be raised.
1.3.6.1.4.1.6321.1.99.1.4.1.8ColumncalixSoamExtMepDmExtMaxRtdThrClrread-createcurrentThe maximum round trip delay threshold upon which an alarm is to be cleared.
1.3.6.1.4.1.6321.1.99.1.4.1.9ColumncalixSoamExtMepDmExtAvgRtdThrSetread-createcurrentThe average round trip delay threshold upon which an alarm is to be raised.
1.3.6.1.4.1.6321.1.99.1.4.1.10ColumncalixSoamExtMepDmExtAvgRtdThrClrread-createcurrentThe average round trip delay threshold upon which an alarm is to be cleared.
1.3.6.1.4.1.6321.1.99.1.4.1.11ColumncalixSoamExtMepDmExtMaxRtdVarThrSetread-createcurrentThe maximum round trip delay variation threshold upon which an alarm is to be raised.
1.3.6.1.4.1.6321.1.99.1.4.1.12ColumncalixSoamExtMepDmExtMaxRtdVarThrClrread-createcurrentThe maximum round trip delay variation threshold upon which an alarm is to be cleared.
1.3.6.1.4.1.6321.1.99.1.4.1.13ColumncalixSoamExtMepDmExtAvgRtdVarThrSetread-createcurrentThe average round trip delay variation threshold upon which an alarm is to be raised.
1.3.6.1.4.1.6321.1.99.1.4.1.14ColumncalixSoamExtMepDmExtAvgRtdVarThrClrread-createcurrentThe average round trip delay variation threshold upon which an alarm is to be cleared.
1.3.6.1.4.1.6321.1.99.1.4.1.15ColumncalixSoamExtMepDmExtAvgRoundTripDelayread-onlycurrentThe average round trip delay for the session, expressed in 1/100th of miliseconds.
1.3.6.1.4.1.6321.1.99.1.4.1.16ColumncalixSoamExtMepDmExtMinRoundTripDelayread-onlycurrentThe minimum round trip delay for the session, expressed in 1/100th of miliseconds.
1.3.6.1.4.1.6321.1.99.1.4.1.17ColumncalixSoamExtMepDmExtMaxRoundTripDelayread-onlycurrentThe maximum round trip delay for the session, expressed in 1/100th of miliseconds.
1.3.6.1.4.1.6321.1.99.1.4.1.18ColumncalixSoamExtMepDmExtAvgRoundTripDelayVariationread-onlycurrentThe average round trip delay variation for the session, expressed in 1/100th of miliseconds.
1.3.6.1.4.1.6321.1.99.1.4.1.19ColumncalixSoamExtMepDmExtMinRoundTripDelayVariationread-onlycurrentThe minimum round trip delay variation for the session, expressed in 1/100th of miliseconds.
1.3.6.1.4.1.6321.1.99.1.4.1.20ColumncalixSoamExtMepDmExtMaxRoundTripDelayVariationread-onlycurrentThe maximum round trip delay variation for the session, expressed in 1/100th of miliseconds.
1.3.6.1.4.1.6321.1.99.1.4.1.21ColumncalixSoamExtMepDmExtAvgRoundTripProcessingDelayread-onlycurrentThe average processing delay for the session, expressed in 1/100th of miliseconds.
1.3.6.1.4.1.6321.1.99.1.4.1.22ColumncalixSoamExtMepDmExtMinRoundTripProcessingDelayread-onlycurrentThe minimum round trip delay variation for the session, expressed in 1/100th of miliseconds.
1.3.6.1.4.1.6321.1.99.1.4.1.23ColumncalixSoamExtMepDmExtMaxRoundTripProcessingDelayread-onlycurrentThe maximum round trip delay variation for the session, expressed in 1/100th of miliseconds.
1.3.6.1.4.1.6321.1.99.1.4.1.24ColumncalixSoamExtMepDmExtDataLengthread-createcurrentLength of data TLV in delay measurement frame.
1.3.6.1.4.1.6321.1.99.1.4.1.25ColumncalixSoamExtMepDmExtDataPatternread-createcurrentData pattern copied into data TLV.
1.3.6.1.4.1.6321.1.99.1.5TablecalixSoamExtMepLmExtTablenot-accessiblecurrentThis table contains extended attributes and counters for the standard MEP table dot1agCfmMepTable, in order to support FLM on demand functionality.
1.3.6.1.4.1.6321.1.99.1.5.1RowcalixSoamExtMepLmExtEntrynot-accessiblecurrentMEP Extension (FLM) table for a given MEP object
1.3.6.1.4.1.6321.1.99.1.5.1.1ColumncalixSoamExtMepLmExtActiveread-createcurrentUse to enable frame delay measurement.
1.3.6.1.4.1.6321.1.99.1.5.1.2ColumncalixSoamExtMepLmExtDestMacAddressread-createcurrentThe Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column calixSoamExtMepLmExtDes…
1.3.6.1.4.1.6321.1.99.1.5.1.3ColumncalixSoamExtMepLmExtDestMepIdread-createcurrentThe MEP ID of remote MEP to which the FLM is to be sent. This address will be used if the value of the column calixSoamExtMepLmExtDestIsMepId is 'True'.
1.3.6.1.4.1.6321.1.99.1.5.1.4ColumncalixSoamExtMepLmExtDestIsMepIdread-createcurrentTrue indicates that MEPID is used for FLM transmission. False indicates that unicast destination MAC address is used for FLM transmission.
1.3.6.1.4.1.6321.1.99.1.5.1.5ColumncalixSoamExtMepLmExtLmTyperead-createcurrentSpecifies the type of Frame Loss Measurement: Single or Dual.
1.3.6.1.4.1.6321.1.99.1.5.1.6ColumncalixSoamExtMepLmExtClassOfServiceread-createcurrentSpecifies the class of service for which the FLM is requested. A value of 8 indicates a full MEP level (CoS agnostic) request.
1.3.6.1.4.1.6321.1.99.1.5.1.7ColumncalixSoamExtMepLmExtLmPeriodread-createcurrentSpecifies the delay between two consecutive FLM messages
1.3.6.1.4.1.6321.1.99.1.5.1.8ColumncalixSoamExtMepLmExtMaxNearEndLossThrSetread-createcurrentThe maximum near end frame loss threshold upon which an alarm is to be raised.
1.3.6.1.4.1.6321.1.99.1.5.1.9ColumncalixSoamExtMepLmExtMaxNearEndLossThrClrread-createcurrentThe maximum near end frame loss threshold upon which an alarm is to be cleared.
1.3.6.1.4.1.6321.1.99.1.5.1.10ColumncalixSoamExtMepLmExtAvgNearEndLossThrSetread-createcurrentThe average near end frame loss threshold upon which an alarm is to be raised.
1.3.6.1.4.1.6321.1.99.1.5.1.11ColumncalixSoamExtMepLmExtAvgNearEndLossThrClrread-createcurrentThe average near end frame loss threshold upon which an alarm is to be cleared.
1.3.6.1.4.1.6321.1.99.1.5.1.12ColumncalixSoamExtMepLmExtMaxFarEndLossThrSetread-createcurrentThe maximum far end loss threshold upon which an alarm is to be raised.
1.3.6.1.4.1.6321.1.99.1.5.1.13ColumncalixSoamExtMepLmExtMaxFarEndLossThrClrread-createcurrentThe maximum far end loss threshold upon which an alarm is to be cleared.
1.3.6.1.4.1.6321.1.99.1.5.1.14ColumncalixSoamExtMepLmExtAvgFarEndLossThrSetread-createcurrentThe average far end loss threshold upon which an alarm is to be raised.
1.3.6.1.4.1.6321.1.99.1.5.1.15ColumncalixSoamExtMepLmExtAvgFarEndLossThrClrread-createcurrentThe average far end loss threshold upon which an alarm is to be cleared.
1.3.6.1.4.1.6321.1.99.1.5.1.16ColumncalixSoamExtMepLmExtNearEndLostPktsread-onlycurrentNumber of frames lost at the near end.
1.3.6.1.4.1.6321.1.99.1.5.1.17ColumncalixSoamExtMepLmExtNearEndLossRatioread-onlycurrentFrame loss ratio at near end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
1.3.6.1.4.1.6321.1.99.1.5.1.18ColumncalixSoamExtMepLmExtMaxNearEndLossRatioread-onlycurrentMaximum frame loss ratio at near end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
1.3.6.1.4.1.6321.1.99.1.5.1.19ColumncalixSoamExtMepLmExtMinNearEndLossRatioread-onlycurrentMinimum frame loss ratio at near end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
1.3.6.1.4.1.6321.1.99.1.5.1.20ColumncalixSoamExtMepLmExtAvgNearEndLossRatioread-onlycurrentAverage frame loss ratio at near end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
1.3.6.1.4.1.6321.1.99.1.5.1.21ColumncalixSoamExtMepLmExtFarEndLostPktsread-onlycurrentNumber of frames lost at the far end.
1.3.6.1.4.1.6321.1.99.1.5.1.22ColumncalixSoamExtMepLmExtFarEndLossRatioread-onlycurrentFrame loss ratio at far end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
1.3.6.1.4.1.6321.1.99.1.5.1.23ColumncalixSoamExtMepLmExtMaxFarEndLossRatioread-onlycurrentMaximum frame loss ratio at far end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
1.3.6.1.4.1.6321.1.99.1.5.1.24ColumncalixSoamExtMepLmExtMinFarEndLossRatioread-onlycurrentMinimum frame loss ratio at far end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
1.3.6.1.4.1.6321.1.99.1.5.1.25ColumncalixSoamExtMepLmExtAvgFarEndLossRatioread-onlycurrentAverage frame loss ratio at far end, in 1/1000000th of percentage points. A value of 10000 means 1% loss ratio.
1.3.6.1.4.1.6321.1.99.1.6TablecalixSoamExtMepMcastLoopbackSessionTablenot-accessiblecurrentThis table is used to initiate a multicast loopback request for a given MEP.
1.3.6.1.4.1.6321.1.99.1.6.1RowcalixSoamExtMepMcastLoopbackSessionEntrynot-accessiblecurrentEach MEP can have only one active Multicast Loopback Request at a given time.
1.3.6.1.4.1.6321.1.99.1.6.1.1ColumncalixSoamExtMepMcastLoopbackSessionStatusread-createcurrentSpecifies the status of the Multicast Loopback request for the particular ITU-T Y.1731 MEP. In order to activate a new session, write 'activate' in this variab…
1.3.6.1.4.1.6321.1.99.1.6.1.2ColumncalixSoamExtMepMcastLoopbackSessionRepliesread-onlycurrentIndicates the number of replies received for this multicast loopback session.
1.3.6.1.4.1.6321.1.99.1.7TablecalixSoamExtMepMcastLoopbackResultsTablenot-accessiblecurrentThis table is used to read the results of a multicast loopback request for a given MEP.
1.3.6.1.4.1.6321.1.99.1.7.1RowcalixSoamExtMepMcastLoopbackResultsEntrynot-accessiblecurrentEach MEP can have only one active Multicast Loopback Request at a given time. This table presents the results of the last request indexed by the reply order.
1.3.6.1.4.1.6321.1.99.1.7.1.1ColumncalixSoamExtMepMcastLoopbackResultsIndexnot-accessiblecurrentSpecifies the index of the multicast loopback result.
1.3.6.1.4.1.6321.1.99.1.7.1.2ColumncalixSoamExtMepMcastLoopbackResultsMacAddressread-onlycurrentMAC address for the received reply.
1.3.6.1.4.1.6321.1.99.1.8TablecalixSoamExtMepStatsExtTablenot-accessiblecurrentThis table contains extensions of the dot1agCfmMepTable for MEP Statistics.
1.3.6.1.4.1.6321.1.99.1.8.1RowcalixSoamExtMepStatsExtEntrynot-accessiblecurrentExtended counters and attributes for MEP configuration.
1.3.6.1.4.1.6321.1.99.1.8.1.1ColumncalixSoamExtMepStatsExtCcmRdiSentread-onlycurrentThe total number of sent CCMs with RDI bit set.
1.3.6.1.4.1.6321.1.99.1.8.1.2ColumncalixSoamExtMepStatsExtCcmReceivedread-onlycurrentThe total number of CCMs received from all remote MEPs.
1.3.6.1.4.1.6321.1.99.1.8.1.3ColumncalixSoamExtMepStatsExtCcmInvalidSenderIdread-onlycurrentThe total number of CCMs with invalid Sender ID TLV received from all remote MEPs.
1.3.6.1.4.1.6321.1.99.1.8.1.4ColumncalixSoamExtMepStatsExtCcmInvalidPortStatusread-onlycurrentThe total number of CCMs with invalid Port Status TLV received from all remote MEPs.
1.3.6.1.4.1.6321.1.99.1.8.1.5ColumncalixSoamExtMepStatsExtCcmInvalidIfStatusread-onlycurrentThe total number of CCMs with invalid Interface Status TLV received from all remote MEPs.
1.3.6.1.4.1.6321.1.99.1.8.1.6ColumncalixSoamExtMepStatsExtCcmRdiReceivedread-onlycurrentThe total number of CCMs with RDI bit set received from all remote MEPs.
1.3.6.1.4.1.6321.1.99.1.8.1.7ColumncalixSoamExtMepStatsExtLbmReceivedread-onlycurrentThe total number of LBM messages received.
1.3.6.1.4.1.6321.1.99.1.8.1.8ColumncalixSoamExtMepStatsExtLbmSentread-onlycurrentThe total number of LBM messages sent.
1.3.6.1.4.1.6321.1.99.1.8.1.9ColumncalixSoamExtMepStatsExtLbmInvalidSenderIdread-onlycurrentThe total number of LBM messages received with a bad sender ID.
1.3.6.1.4.1.6321.1.99.1.8.1.10ColumncalixSoamExtMepStatsExtLbrInvalidSenderIdread-onlycurrentThe total number of LBR messages received with a bad sender ID.
1.3.6.1.4.1.6321.1.99.1.8.1.11ColumncalixSoamExtMepStatsExtLtmReceivedread-onlycurrentThe total number of LTM messages received.
1.3.6.1.4.1.6321.1.99.1.8.1.12ColumncalixSoamExtMepStatsExtLtmSentread-onlycurrentThe total number of LTM messages sent.
1.3.6.1.4.1.6321.1.99.1.8.1.13ColumncalixSoamExtMepStatsExtLtrInvalidMacread-onlycurrentThe total number of LTR messages received with a bad MAC address.
1.3.6.1.4.1.6321.1.99.1.8.1.14ColumncalixSoamExtMepStatsExtLtrReceivedread-onlycurrentThe total number of LTR messages received.
1.3.6.1.4.1.6321.1.99.1.8.1.15ColumncalixSoamExtMepStatsExtLtrSentread-onlycurrentThe total number of LTR messages sent.
1.3.6.1.4.1.6321.1.99.1.8.1.16ColumncalixSoamExtMepStatsExtLmmReceivedread-onlycurrentThe total number of LMM messages received.
1.3.6.1.4.1.6321.1.99.1.8.1.17ColumncalixSoamExtMepStatsExtLmmSentread-onlycurrentThe total number of LMM messages sent.
1.3.6.1.4.1.6321.1.99.1.8.1.18ColumncalixSoamExtMepStatsExtLmrReceivedread-onlycurrentThe total number of LMR messages received.
1.3.6.1.4.1.6321.1.99.1.8.1.19ColumncalixSoamExtMepStatsExtLmrSentread-onlycurrentThe total number of LMR messages sent.
1.3.6.1.4.1.6321.1.99.1.8.1.20ColumncalixSoamExtMepStatsExtDmmReceivedread-onlycurrentThe total number of DMM messages received.
1.3.6.1.4.1.6321.1.99.1.8.1.21ColumncalixSoamExtMepStatsExtDmmSentread-onlycurrentThe total number of DMM messages sent.
1.3.6.1.4.1.6321.1.99.1.8.1.22ColumncalixSoamExtMepStatsExtDmrReceivedread-onlycurrentThe total number of DMR messages received.
1.3.6.1.4.1.6321.1.99.1.8.1.23ColumncalixSoamExtMepStatsExtDmrSentread-onlycurrentThe total number of DMR messages sent.
1.3.6.1.4.1.6321.1.99.1.8.1.24ColumncalixSoamExtMepStatsExtResetStatread-createcurrentTrue indicates MEP statistics should be cleared.
1.3.6.1.4.1.6321.1.99.1.9TablecalixSoamExtMepUcastLoopbackResultsTablenot-accessiblecurrentThis table contains Unicast Loopback protocol results for corresponding MEP.
1.3.6.1.4.1.6321.1.99.1.9.1RowcalixSoamExtMepUcastLoopbackResultsEntrynot-accessiblecurrentUnicast Loopback result for corresponding MEP.
1.3.6.1.4.1.6321.1.99.1.9.1.1ColumncalixSoamExtMepUcastLoopbackResultsLbmFirstSeqNumberread-onlycurrentThe Loopback Transaction Identifier of the first LBM sent. This value can be obtained from dot1agCfmMepTransmitLbmSeqNumber of dot1agCfmMepTable table after Lo…
1.3.6.1.4.1.6321.1.99.1.9.1.2ColumncalixSoamExtMepUcastLoopbackResultsDestMacAddressread-onlycurrentThe MAC Address of destination MP.
1.3.6.1.4.1.6321.1.99.1.9.1.3ColumncalixSoamExtMepUcastLoopbackResultsStatusread-onlycurrentSpecifies the state of the current Loopback request.
1.3.6.1.4.1.6321.1.99.1.9.1.4ColumncalixSoamExtMepUcastLoopbackResultsLbmOutread-onlycurrentLoopback Messages sent.
1.3.6.1.4.1.6321.1.99.1.9.1.5ColumncalixSoamExtMepUcastLoopbackResultsLbrInread-onlycurrentLoopback replies received.
1.3.6.1.4.1.6321.1.99.1.10TablecalixSoamExtCfgTablenot-accessiblecurrentThis table contains Unicast Loopback protocol results for corresponding MEP.
1.3.6.1.4.1.6321.1.99.1.10.1RowcalixSoamExtCfgEntrynot-accessiblecurrentGeneral Service OAM Configuration Table.
1.3.6.1.4.1.6321.1.99.1.10.1.1ColumncalixSoamExtCfgIndexread-createcurrentIndex of auto instantited configuration MIB. Must be 1.
1.3.6.1.4.1.6321.1.99.1.10.1.2ColumncalixSoamExtCfgAdminStateread-createcurrentState of Service level Ethernet OAM. Set this to enable to begin transmitting Ethernet OAM frames from configures MEG/MEPs.
1.3.6.1.4.1.6321.1.99.1.10.1.3ColumncalixSoamExtCfgPermissionread-createcurrentDefault permission level determining which optional TLVs to include.
1.3.6.1.4.1.6321.1.99.1.10.1.4ColumncalixSoamExtCfgChassisIdSubtyperead-createcurrentChassis ID Subtype.
1.3.6.1.4.1.6321.1.99.1.10.1.5ColumncalixSoamExtCfgChassisIdread-createcurrentChassis ID.
1.3.6.1.4.1.6321.1.99.1.10.1.6ColumncalixSoamExtCfgManAddressDomainread-createcurrentManagement Domain.
1.3.6.1.4.1.6321.1.99.1.10.1.7ColumncalixSoamExtCfgManAddressread-createcurrentManagement Address.
1.3.6.1.4.1.6321.1.99.1.10.1.8ColumncalixSoamExtCfgCcmOptTlvSenderIdread-createcurrentEnable to include sender ID TLV in CCM messages.
1.3.6.1.4.1.6321.1.99.1.10.1.9ColumncalixSoamExtCfgCcmOptTlvPortStatusread-createcurrentEnable to include Port Status TLV in CCM messages.
1.3.6.1.4.1.6321.1.99.1.10.1.10ColumncalixSoamExtCfgCcmOptTlvIfStatusread-createcurrentEnable to include Interface Status TLV in CCM messages.
1.3.6.1.4.1.6321.1.99.1.10.1.11ColumncalixSoamExtCfgLtmOptTlvSenderIdread-createcurrentEnable to include Sender ID TLV in LTM messages.
1.3.6.1.4.1.6321.1.99.1.10.1.12ColumncalixSoamExtCfgLbmOptTlvSenderIdread-createcurrentEnable to include Sender ID TLV in LBM messages.
1.3.6.1.4.1.6321.1.99.1.10.1.13ColumncalixSoamExtCfgLbmOptTlvIfStatusread-createcurrentEnable to include Interface Status TLV in LBM messages.
1.3.6.1.4.1.6321.1.99.1.10.1.14ColumncalixSoamExtCfgLbmOptTlvDataread-createcurrentEnable to include Data TLV in LBM messages.
1.3.6.1.4.1.6321.1.99.1.10.1.15ColumncalixSoamExtCfgDmmOptTlvDataread-createcurrentEnable to include Data TLV in DMM messages.
1.3.6.1.4.1.6321.1.99.1.11TablecalixLoamExtCfgTablenot-accessiblecurrentThis table contains settings for enabling/disabling the Link OAM feature.
1.3.6.1.4.1.6321.1.99.1.11.1RowcalixLoamExtCfgEntrynot-accessiblecurrentGeneral Link OAM Configuration Table.
1.3.6.1.4.1.6321.1.99.1.11.1.1ColumncalixLoamExtCfgIndexread-createcurrentIndex of auto instantiated configuration MIB. Must be 1.
1.3.6.1.4.1.6321.1.99.1.11.1.2ColumncalixLoamExtCfgAdminStateread-writecurrentState of Service level Ethernet OAM. Set this to enable to begin transmitting Ethernet OAM frames from configures MEG/MEPs.
1.3.6.1.4.1.6321.1.99.1.12TablecalixRfc2544CfgTablenot-accessiblecurrentThis table places a port in RFC2544 Reflector Mode.
1.3.6.1.4.1.6321.1.99.1.12.1RowcalixRfc2544CfgEntrynot-accessiblecurrentOnly one port can be in RFC 2544 Reflector Mode at any given time.
1.3.6.1.4.1.6321.1.99.1.12.1.1ColumncalixRfc2544CfgIndexread-createcurrentIndex of auto instantiated RFC 2544 configuration MIB. Must be 1.
1.3.6.1.4.1.6321.1.99.1.12.1.2ColumncalixRfc2544CfgAdminStateread-createcurrentAdministrative state of the RFC 2544 Reflector.
1.3.6.1.4.1.6321.1.99.1.12.1.3ColumncalixRfc2544CfgIfIndexread-writecurrentThis attributes specifies the interface index for the port in RFC 2544 Reflector Mode.
1.3.6.1.4.1.6321.1.99.1.12.1.4ColumncalixRfc2544CfgVlanIdread-writecurrentVLAN ID of Service.
1.3.6.1.4.1.6321.1.99.1.12.1.5ColumncalixRfc2544CfgMacAddressread-writecurrentDestination MAC address of frames to reflect.
Type Definitions
NameSyntaxStatusDescription
CalixEoamEnableTypeINTEGER { enable (1), disable (2) }currentEnable/disable state.
CalixSoamLmTypeINTEGER { single (1), dual (2) }currentSingle/Dual Frame Loss Measurement Type.