CARD-MIB
70 objects
The MIB module for cards in coriolis boxes
Imported Objects
| CORIOLIS-MIB | card coriolisMibs |
| RFC-1215 | TRAP-TYPE |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5812.2 | NodemoduleStatusChange | Change in the operational state of a module. 1 means the module went down, 2 means it went up | ||
| 1.3.6.1.4.1.5812.2.1 | IdentitycardMIB | The MIB module for cards in coriolis boxes | ||
| 1.3.6.1.4.1.5812.2.2 | ScalarcardCount | read-only | current | The number of active cards in the device |
| 1.3.6.1.4.1.5812.2.3 | TablecardEEPromTable | not-accessible | current | The table containing various kinds of card information |
| 1.3.6.1.4.1.5812.2.3.1 | RowcardEEPromEntry | not-accessible | current | Entry containing information about a card in the system. |
| 1.3.6.1.4.1.5812.2.3.1.1 | ColumnslotNo | not-accessible | current | This variable is used as an index in all card tables |
| 1.3.6.1.4.1.5812.2.3.1.2 | ColumncardSIDFVer | read-only | current | SID ROM Version of the SID-ROM format which represents the 1st 20 bytes with a 1 byte value. This variable is used only during the boot process when a sanity c… |
| 1.3.6.1.4.1.5812.2.3.1.3 | ColumncardHwType | read-only | current | An object which uniquely identifies the card type. |
| 1.3.6.1.4.1.5812.2.3.1.4 | ColumncardHwSubType | read-only | current | Identifies the functional revision of this card. Example: Suppose a card's hardware could be configured with internal or external timing modes and suppose firm… |
| 1.3.6.1.4.1.5812.2.3.1.5 | ColumncardImageType | read-only | current | An object which identifies the bootrom and system images to running on a card. This object only applies to card types with on-board processor. The values are: … |
| 1.3.6.1.4.1.5812.2.3.1.6 | ColumncardMACaddressNum | read-only | current | Indicates the number of MAC Addresses allocated to this module. Current values range from 0 to 64. This value is 0 when not applicable. |
| 1.3.6.1.4.1.5812.2.3.1.7 | ColumncardMacAddress | read-only | current | Stores the starting MAC Address for this module. All 6 bytes are zero when not applicable. |
| 1.3.6.1.4.1.5812.2.3.1.8 | ColumncardAssemblyClass | read-only | current | Identifies the hardware class. This field is a duplicate of the assembly class portion of the assembly number. It is stored and displayed in Binary Encoded Dec… |
| 1.3.6.1.4.1.5812.2.3.1.9 | ColumncardAssemblyId | read-only | current | Identifies the module type. This field is a duplicate of the assembly identifier portion of the assembly number. It is stored and displayed in Binary Encoded D… |
| 1.3.6.1.4.1.5812.2.3.1.10 | ColumncardAssemblyTabNum | read-only | current | This field is a duplicate of the assembly tab number portion of the assembly number. It is stored and displayed in Binary Encoded Decimal (BCD) format. For Exa… |
| 1.3.6.1.4.1.5812.2.3.1.11 | ColumncardAssemblyRev | read-only | current | Identifies the assembly revision of the module. This field is a duplicate of the assembly revision field. It is stored and displayed in Binary Encoded Decimal … |
| 1.3.6.1.4.1.5812.2.3.1.12 | Columncardbrchecksum | read-only | current | Contains a checksum calculated over the first 16 bytes of SID ROM data. |
| 1.3.6.1.4.1.5812.2.3.1.13 | ColumncardSIDInfoVersion | read-only | current | Reflects the revision level of the information portion of the SID-ROM data. |
| 1.3.6.1.4.1.5812.2.3.1.14 | ColumncardSerialNum | read-only | current | Stores a 12 digit serial number associated with a module. (example: PLX1100-0100). |
| 1.3.6.1.4.1.5812.2.3.1.15 | ColumncardAssemblyNumString | read-only | current | Module's assembly number. |
| 1.3.6.1.4.1.5812.2.3.1.16 | ColumncardAssemblyRevString | read-only | current | Revision level of the card. |
| 1.3.6.1.4.1.5812.2.3.1.17 | ColumncardCLEICode | read-only | current | Stores an ASCII String duplicating CLEI (Common Language Equipment Identifier ) Code encoded into the bar code. 10 ASCII characters of CLEI code |
| 1.3.6.1.4.1.5812.2.3.1.18 | ColumncardCLEIECICode | read-only | current | Stores an ASCII String duplicating CLEI ECI (Equipment Catalog Item) Code encoded into the bar code. Bar Code in numeric form |
| 1.3.6.1.4.1.5812.2.3.1.19 | ColumncardChecksum | read-only | current | Contains a checksum calculated over the previous 252 bytes of SID ROM data. |
| 1.3.6.1.4.1.5812.2.4 | TableslotTable | not-accessible | current | The slot table |
| 1.3.6.1.4.1.5812.2.4.1 | RowslotEntry | not-accessible | current | Entry containing information about a slot in the system. |
| 1.3.6.1.4.1.5812.2.4.1.1 | ColumnslotAdminState | read-write | current | The slot admin state |
| 1.3.6.1.4.1.5812.2.4.1.2 | ColumnslotOperState | read-only | current | The slot oper state. removed - card not in slot and not connected syncWait - card in slot waiting for syncPoint synced - card passed a syncPoint syncFailed - c… |
| 1.3.6.1.4.1.5812.2.4.1.3 | ColumnslotType | read-write | current | The type of slot for this device. The following is a list of different kinds of slots: 1 - MMSlot (9,10 for optiFlow3X and 13,14 for optiFlow5x) 2 - optiFlow3x… |
| 1.3.6.1.4.1.5812.2.4.1.4 | ColumnslotCardType | read-write | current | The type of card in the slot |
| 1.3.6.1.4.1.5812.2.4.1.5 | ColumnslotConnectionSize | read-write | current | The connection size to SM |
| 1.3.6.1.4.1.5812.2.4.1.6 | ColumnslotSMSlot | read-write | current | SM slot that this slot is connected to |
| 1.3.6.1.4.1.5812.2.4.1.7 | ColumnslotInsertState | read-only | current | Whether a card is present in the slot or not |
| 1.3.6.1.4.1.5812.2.4.1.8 | ColumnslotFileState | read-only | current | File locked or not |
| 1.3.6.1.4.1.5812.2.4.1.9 | ColumnslotModuleChangeStatus | accessible-for-notify | current | This variable is sent out in a module change event to communicate what happened to the module.The 'FAILURE' and 'FAILOVER' values are used by the mmr task to r… |
| 1.3.6.1.4.1.5812.2.4.1.10 | ColumnslotModuleTempStatus | accessible-for-notify | current | Indicates the temperature status of the module in the slot |
| 1.3.6.1.4.1.5812.2.4.1.11 | ColumnslotIoCardStatus | accessible-for-notify | current | Indicates the responsiveness status of the module in the slot |
| 1.3.6.1.4.1.5812.2.4.1.12 | ColumnslotFlashThreshold | accessible-for-notify | current | Indicates the flash threshold, applicable for only the active and standby management modules |
| 1.3.6.1.4.1.5812.2.4.1.13 | ColumnslotFlashSectorsOverThreshold | accessible-for-notify | current | Indicates the number of sectors over threshold, applicable for only the active and standby MMs |
| 1.3.6.1.4.1.5812.2.5 | TabletdmIoCardTable | not-accessible | current | The table for TDM IO cards |
| 1.3.6.1.4.1.5812.2.5.1 | RowtdmIoCardEntry | not-accessible | current | Entry containing information about an TDM IO module - DS1/DS3/E1/E3 |
| 1.3.6.1.4.1.5812.2.5.1.1 | ColumntdmIoCardType | read-write | current | The type of the TDM IO module |
| 1.3.6.1.4.1.5812.2.5.1.2 | ColumntdmIoCardOperState | read-only | current | The oper state of the TDM IO module |
| 1.3.6.1.4.1.5812.2.5.1.3 | ColumntdmIoCardMode | read-write | current | Whether this is an unchannelized or channelized module |
| 1.3.6.1.4.1.5812.2.5.1.4 | ColumntdmIoCardConfiguredPorts | read-only | current | Bitmap of ports configured on the module. The bit positions of the 1 bits in the binary form of this number give the ports configured in this card. For example… |
| 1.3.6.1.4.1.5812.2.5.1.5 | ColumntdmIoCardRowStatus | read-write | current | This variable is used to create or delete instances of TDM IO cards. This variable subsumes the admin state variable, and once the row is created, its value re… |
| 1.3.6.1.4.1.5812.2.5.1.6 | ColumntdmIoCardNumPMIntervals | read-write | current | This is the number of performance monitoring intervals for the ports on this card |
| 1.3.6.1.4.1.5812.2.6 | TableetherCardTable | not-accessible | current | The table for ethernet cards |
| 1.3.6.1.4.1.5812.2.6.1 | RowetherCardEntry | not-accessible | current | Entry containing information about an ethernet module |
| 1.3.6.1.4.1.5812.2.6.1.1 | ColumnetherCardOperState | read-only | current | The oper state of the ethernet module |
| 1.3.6.1.4.1.5812.2.6.1.2 | ColumnetherCardActivePortMask | read-only | current | This returns a mask of active ports. An active port is one that has been created via a Port Create MO. A value of 1 in bit position N-1 indicates that port N h… |
| 1.3.6.1.4.1.5812.2.6.1.3 | ColumnetherCardPhyResetState | read-write | current | The phy reset state of the module |
| 1.3.6.1.4.1.5812.2.6.1.4 | ColumnetherCardRowStatus | read-write | current | This variable is used to create or delete instances of ethernet cards. This variable subsumes the admin state variable, and once the row is created, its value … |
| 1.3.6.1.4.1.5812.2.7 | TableatmCardTable | not-accessible | current | The table for atm cards |
| 1.3.6.1.4.1.5812.2.7.1 | RowatmCardEntry | not-accessible | current | Entry containing information about an atm module |
| 1.3.6.1.4.1.5812.2.7.1.1 | ColumnatmCardOperState | read-only | current | The oper state of the atm module |
| 1.3.6.1.4.1.5812.2.7.1.2 | ColumnatmCardActivePortMask | read-only | current | This returns a mask of active ports. An active port is one that has been created via a Port Create MO. A value of 1 in bit position N-1 indicates that port N h… |
| 1.3.6.1.4.1.5812.2.7.1.3 | ColumnatmCardRowStatus | read-write | current | This variable is used to create or delete instances of atm cards. This variable subsumes the admin state variable, and once the row is created, its value retur… |
| 1.3.6.1.4.1.5812.2.8 | TableopticalCardTable | not-accessible | current | The table for optical cards |
| 1.3.6.1.4.1.5812.2.8.1 | RowopticalCardEntry | not-accessible | current | Entry containing information about an optical module |
| 1.3.6.1.4.1.5812.2.8.1.1 | ColumnopticalCardSlotType | read-write | current | The type of module - transmitter or receiver |
| 1.3.6.1.4.1.5812.2.8.1.2 | ColumnopticalCardOpticsType | read-write | current | The type of optics on the module |
| 1.3.6.1.4.1.5812.2.8.1.3 | ColumnopticalCardRowStatus | read-write | current | This variable is used to create or delete instances of optical cards |
| 1.3.6.1.4.1.5812.2.9 | TableposCardTable | not-accessible | current | The table for pos cards |
| 1.3.6.1.4.1.5812.2.9.1 | RowposCardEntry | not-accessible | current | Entry containing information about an pos module |
| 1.3.6.1.4.1.5812.2.9.1.1 | ColumnposCardActivePortMask | read-only | current | Bitmap describing the active ports on this pos module |
| 1.3.6.1.4.1.5812.2.9.1.2 | ColumnposCardPhyResetState | read-write | current | The phy reset state of the module |
| 1.3.6.1.4.1.5812.44 | NodemoduleTempChange | Indicates temperature (hot/normal) in the chassis. | ||
| 1.3.6.1.4.1.5812.45 | NodeioCardStatusChange | Indicates the failure of IO card to respond. | ||
| 1.3.6.1.4.1.5812.46 | NodeemFlashLife | Flash End-of-life alarm. |