CDD-564
269 objects
Module for CDD-564 Satellite Demod
Imported Objects
| ComtechEFData | comtechEFData |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6247.25 | Identitycdd564 | Module for CDD-564 Satellite Demod | ||
| 1.3.6.1.4.1.6247.25.1 | Nodecdd564Objects | |||
| 1.3.6.1.4.1.6247.25.1.1 | Nodecdd564Administration | |||
| 1.3.6.1.4.1.6247.25.1.1.1 | Nodecdd564AccessLists | |||
| 1.3.6.1.4.1.6247.25.1.1.1.1 | Tablecdd564AccessListTable | not-accessible | current | The table for the access list. |
| 1.3.6.1.4.1.6247.25.1.1.1.1.1 | Rowcdd564AccessListEntry | not-accessible | current | The entry for the access list table. |
| 1.3.6.1.4.1.6247.25.1.1.1.1.1.1 | Columncdd564AccessListIndex | read-only | current | The index for the access list from 1..4. |
| 1.3.6.1.4.1.6247.25.1.1.1.1.1.2 | Columncdd564AccessIPAddress | read-write | current | The IP addresses that can access the unit. The value of 0.0.0.0 means not defined. |
| 1.3.6.1.4.1.6247.25.1.1.1.1.1.3 | Columncdd564AccessSubnetMaskLength | read-write | current | The subnet mask length of the IP address for the access list. Subnet mask can be from 8..32. The value of 0 means not defined. |
| 1.3.6.1.4.1.6247.25.1.1.1.2 | Scalarcdd564AccessListEnforcement | read-write | current | Enable or disable enforcement of the the access list. Note: Be sure that you have added the SNMP browser's/manager's IP Address to the access list before enabl… |
| 1.3.6.1.4.1.6247.25.1.1.2 | Nodecdd564Features | |||
| 1.3.6.1.4.1.6247.25.1.1.2.1 | Scalarcdd564PingReply | read-write | current | Enable or disable ping reply from unit. |
| 1.3.6.1.4.1.6247.25.1.1.2.2 | Scalarcdd564Telnet | read-write | current | Enable or disable telnet access to unit. |
| 1.3.6.1.4.1.6247.25.1.1.2.3 | Scalarcdd564IGMP | read-write | current | Enable or disable the Internet Group Management Protocol (IGMP). |
| 1.3.6.1.4.1.6247.25.1.1.2.4 | Scalarcdd564ForwardMulticasts | read-write | current | Enable or disable forwarding all multicasts received from the Satellite interface to the Ethernet interface. |
| 1.3.6.1.4.1.6247.25.1.1.2.5 | Tablecdd564FeaturesTable | not-accessible | current | The table (per demodulator) of FAST Features. |
| 1.3.6.1.4.1.6247.25.1.1.2.5.1 | Rowcdd564FeaturesEntry | not-accessible | current | The entry for the FAST Feature (per demod) table. |
| 1.3.6.1.4.1.6247.25.1.1.2.5.1.1 | Columncdd564FeatureIndex | read-only | current | The index for the FAST Feature (per demod) table. |
| 1.3.6.1.4.1.6247.25.1.1.2.5.1.2 | Columncdd564HeaderCompression | read-write | current | Availability of header compression is based on FAST features Note: To use header compression, it must be FAST available and enabled on both the transmit and re… |
| 1.3.6.1.4.1.6247.25.1.1.2.6 | Scalarcdd564WorkingMode | read-write | current | Configure the system's working mode. The CDM-IP can operate in any of these modes. 1. Router - Small Network Mode - The system functions as router and uses the… |
| 1.3.6.1.4.1.6247.25.1.1.3 | Nodecdd5643xDESEncryption | |||
| 1.3.6.1.4.1.6247.25.1.1.3.1 | Tablecdd5643xDESRxKeyTable | not-accessible | current | The table (one row per demod) for triple DES (3xDES) receive decrypt keys. |
| 1.3.6.1.4.1.6247.25.1.1.3.1.1 | Rowcdd5643xDESRxKeyEntry | not-accessible | current | The entry (per demod) of the 3xDES receive decrypt key table. |
| 1.3.6.1.4.1.6247.25.1.1.3.1.1.1 | Columncdd5643xDESRxKeyIndex | read-only | current | The index (per demod) of the 3xDES receive decrypt key table. |
| 1.3.6.1.4.1.6247.25.1.1.3.1.1.2 | Columncdd5643xDESRxKey1 | read-write | current | The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters). |
| 1.3.6.1.4.1.6247.25.1.1.3.1.1.3 | Columncdd5643xDESRxKey2 | read-write | current | The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters). |
| 1.3.6.1.4.1.6247.25.1.1.3.1.1.4 | Columncdd5643xDESRxKey3 | read-write | current | The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters). |
| 1.3.6.1.4.1.6247.25.1.1.3.1.1.5 | Columncdd5643xDESRxKey4 | read-write | current | The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters). |
| 1.3.6.1.4.1.6247.25.1.1.3.1.1.6 | Columncdd5643xDESRxKey5 | read-write | current | The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters). |
| 1.3.6.1.4.1.6247.25.1.1.3.1.1.7 | Columncdd5643xDESRxKey6 | read-write | current | The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters). |
| 1.3.6.1.4.1.6247.25.1.1.3.1.1.8 | Columncdd5643xDESRxKey7 | read-write | current | The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters). |
| 1.3.6.1.4.1.6247.25.1.1.3.1.1.9 | Columncdd5643xDESRxKey8 | read-write | current | The 3xDES receive decrypt key. The key length is 192 bits (24 bytes or 48 characters). |
| 1.3.6.1.4.1.6247.25.1.1.4 | Nodecdd564SMTP | |||
| 1.3.6.1.4.1.6247.25.1.1.4.1 | Scalarcdd564SMTPServerIPAddress | read-write | current | The IP address of the SMTP server for sending problem reports. This IP adderess should correspond to a local Mail server. |
| 1.3.6.1.4.1.6247.25.1.1.4.2 | Scalarcdd564SMTPDomain | read-write | current | The SMTP Domain for sending problem reports. This value should be comtechefdata.com. |
| 1.3.6.1.4.1.6247.25.1.1.4.3 | Scalarcdd564SMTPUserName | read-write | current | The user name for sending problem reports. This value should be cdmipsupport. |
| 1.3.6.1.4.1.6247.25.1.1.5 | Nodecdd564SNMP | |||
| 1.3.6.1.4.1.6247.25.1.1.5.1 | Scalarcdd564SNMPTrapDestinationIPAddress | read-write | current | The IP address were SNMP notifications (traps) are to be sent. This IP address should correspond to a SNMP manager or browser. |
| 1.3.6.1.4.1.6247.25.1.1.5.2 | Scalarcdd564SNMPTrapCommunity | read-write | current | The community that will be included in SNMP notifications (traps) that are sent from unit. |
| 1.3.6.1.4.1.6247.25.1.1.5.3 | Scalarcdd564SNMPTrapVersion | read-write | current | The SNMP version that will be used when sending traps from the unit. SNMPv1 will send V1 traps. SNMPv2 will send V2 notifications. |
| 1.3.6.1.4.1.6247.25.1.1.5.4 | Scalarcdd564SNMPAuthenticationFailureCommunity | accessible-for-notify | current | The community that did not match valid SNMP Read or Write community. Note: This is ONLY used in the Authentication Failure trap. |
| 1.3.6.1.4.1.6247.25.1.1.5.5 | Scalarcdd564SNMPAuthenticationFailureIPAddress | accessible-for-notify | current | The IP address that did not send a valid SNMP Read or Write community. Note: This is ONLY used in the Authentication Failure trap. |
| 1.3.6.1.4.1.6247.25.1.1.5.6 | Scalarcdd564SNMPTrapDestinationIPAddress2 | read-write | current | The secondary IP address were SNMP notifications (traps) are to be sent. This IP address should correspond to a secondary SNMP manager or browser. |
| 1.3.6.1.4.1.6247.25.1.2 | Nodecdd564Interfaces | |||
| 1.3.6.1.4.1.6247.25.1.2.1 | Nodecdd564EthernetInterface | |||
| 1.3.6.1.4.1.6247.25.1.2.1.1 | Scalarcdd564MACAddress | read-only | current | The MAC address assigned to the Ethernet interface. |
| 1.3.6.1.4.1.6247.25.1.2.1.2 | Scalarcdd564EthernetSpeed | read-write | current | The speed of the Ethernet interface. |
| 1.3.6.1.4.1.6247.25.1.2.1.3 | Scalarcdd564IPAddress | read-write | current | The IP address assigned to the Ethernet interface. |
| 1.3.6.1.4.1.6247.25.1.2.1.4 | Scalarcdd564SubnetMaskLen | read-write | current | The subnet mask length of the IP address. |
| 1.3.6.1.4.1.6247.25.1.2.2 | Nodecdd564DemodulatorInterfaces | |||
| 1.3.6.1.4.1.6247.25.1.2.2.2 | Scalarcdd564HDLCAddressMode | read-only | current | The size of HDLC address used for sending packets over satellite interface can range from 0 - 2 bytes. The satellite interface will operate in one of the follo… |
| 1.3.6.1.4.1.6247.25.1.2.2.3 | Tablecdd564HDLCAddressTable | not-accessible | current | The table for the Demodulator HDLC Addresses. |
| 1.3.6.1.4.1.6247.25.1.2.2.3.1 | Rowcdd564HDLCAddressEntry | not-accessible | current | The entry of the HDLC Address table. |
| 1.3.6.1.4.1.6247.25.1.2.2.3.1.1 | Columncdd564HDLCAddressIndex | read-only | current | The Demod number corresponding to 1 of 4 demodulators. |
| 1.3.6.1.4.1.6247.25.1.2.2.3.1.3 | Columncdd564HDLCAddress1 | read-write | current | The HDLC address #1 for the satellite interface. The valid values are: 1. Small network, 1 to 254 (0x1 - 0xFE). 2. Large network, 1 to 32766 (0x1 - 0x0x7FFE). … |
| 1.3.6.1.4.1.6247.25.1.2.2.3.1.4 | Columncdd564HDLCAddress2 | read-write | current | The HDLC address #2 for the satellite interface. The valid values are: 1. Small network, 1 to 254 (0x1 - 0xFE). 2. Large network, 1 to 32766 (0x1 - 0x0x7FFE). … |
| 1.3.6.1.4.1.6247.25.1.2.2.3.1.5 | Columncdd564HDLCAddress3 | read-write | current | The HDLC address #3 for the satellite interface. The valid values are: 1. Small network, 1 to 254 (0x1 - 0xFE). 2. Large network, 1 to 32766 (0x1 - 0x0x7FFE). … |
| 1.3.6.1.4.1.6247.25.1.2.2.3.1.6 | Columncdd564HDLCAddress4 | read-write | current | The HDLC address #4 for the satellite interface. The valid values are: 1. Small network, 1 to 254 (0x1 - 0xFE). 2. Large network, 1 to 32766 (0x1 - 0x0x7FFE). … |
| 1.3.6.1.4.1.6247.25.1.3 | Nodecdd564Routes | |||
| 1.3.6.1.4.1.6247.25.1.3.1 | Tablecdd564RouteTable | not-accessible | current | The route table used in Router mode. |
| 1.3.6.1.4.1.6247.25.1.3.1.1 | Rowcdd564RouteEntry | not-accessible | current | The entry for the the route table. |
| 1.3.6.1.4.1.6247.25.1.3.1.1.1 | Columncdd564RouteIndex | read-write | current | The index for the route table. |
| 1.3.6.1.4.1.6247.25.1.3.1.1.2 | Columncdd564RouteName | read-write | current | The name of the route. All routes must be named. |
| 1.3.6.1.4.1.6247.25.1.3.1.1.3 | Columncdd564RouteDestAddress | read-write | current | The destination IP address for the route. |
| 1.3.6.1.4.1.6247.25.1.3.1.1.4 | Columncdd564RouteDestMaskLen | read-write | current | The subnet mask lenght for the destination IP address. |
| 1.3.6.1.4.1.6247.25.1.3.1.1.5 | Columncdd564RouteNextHopAddress | read-write | current | The next hop IP address for the route. |
| 1.3.6.1.4.1.6247.25.1.3.1.1.6 | Columncdd564RouteMulticast | read-write | current | If the route is a multicast, packets can be: 1. forwarded 2. filtered If the route is unicast, the field is not applicable. |
| 1.3.6.1.4.1.6247.25.1.3.1.1.7 | Columncdd564RouteInterface | read-write | current | Routes are destined to the Ethernet interface. |
| 1.3.6.1.4.1.6247.25.1.3.1.1.8 | Columncdd564RouteRowStatus | read-write | current | This value is used for status of route: active(1) - The route is active. These values are used to create or delete route: createAndGo(4) - The route is to be c… |
| 1.3.6.1.4.1.6247.25.1.4 | Nodecdd564Protocols | |||
| 1.3.6.1.4.1.6247.25.1.4.1 | Nodecdd564IGMPConfig | |||
| 1.3.6.1.4.1.6247.25.1.4.1.1 | Nodecdd564IGMPServer | |||
| 1.3.6.1.4.1.6247.25.1.4.1.1.1 | Scalarcdd564IGMPQueryPeriod | read-write | current | The IGMP query period, in seconds. |
| 1.3.6.1.4.1.6247.25.1.4.1.1.2 | Scalarcdd564IGMPMaxResponseTime | read-write | current | The IGMP maximum response time, in seconds. |
| 1.3.6.1.4.1.6247.25.1.4.1.1.3 | Scalarcdd564IGMPMaxMissBeforeLeavingGroup | read-write | current | The maximum number of missed responses before leaving the IGMP group. |
| 1.3.6.1.4.1.6247.25.1.4.1.3 | Tablecdd564IGMPTable | not-accessible | current | The table for IGMP groups. |
| 1.3.6.1.4.1.6247.25.1.4.1.3.1 | Rowcdd564IGMPEntry | not-accessible | current | The entry for the IGMP group table. |
| 1.3.6.1.4.1.6247.25.1.4.1.3.1.1 | Columncdd564IGMPIndex | read-only | current | The index for the IGMP group table. |
| 1.3.6.1.4.1.6247.25.1.4.1.3.1.2 | Columncdd564IGMPTTL | read-only | current | The TTL for the multicast group. |
| 1.3.6.1.4.1.6247.25.1.4.1.3.1.3 | Columncdd564IGMPClientState | read-only | current | The state for the multicast group. |
| 1.3.6.1.4.1.6247.25.1.4.1.3.1.4 | Columncdd564IGMPSrc | read-only | current | The interface from which the multicast group was received. |
| 1.3.6.1.4.1.6247.25.1.4.1.3.1.5 | Columncdd564IGMPGroupIPAddress | read-only | current | The multicast group address. |
| 1.3.6.1.4.1.6247.25.1.5 | Nodecdd564Maint | |||
| 1.3.6.1.4.1.6247.25.1.5.1 | Nodecdd564UnitInformation | |||
| 1.3.6.1.4.1.6247.25.1.5.1.1 | Scalarcdd564BootInfo | read-only | current | The version and revision information for the boot application. |
| 1.3.6.1.4.1.6247.25.1.5.1.2 | Scalarcdd564Bulk1Info | read-only | current | The version and revision information for the bulk application in image 1. |
| 1.3.6.1.4.1.6247.25.1.5.1.3 | Scalarcdd564Bulk2Info | read-only | current | The version and revision information for the bulk application in image 2. |
| 1.3.6.1.4.1.6247.25.1.5.1.4 | Scalarcdd564FPGARx1Info | read-only | current | The version and revision information for the Rx FPGA in image 1. |
| 1.3.6.1.4.1.6247.25.1.5.1.5 | Scalarcdd564FPGARx2Info | read-only | current | The version and revision information for the Rx FPGA in image 2. |
| 1.3.6.1.4.1.6247.25.1.5.2 | Nodecdd564BulkDatabase | |||
| 1.3.6.1.4.1.6247.25.1.5.2.1 | Scalarcdd564BootImage | read-write | current | Specifies which image will be booted: latest - boots the latest image determined by the most recent build date image 1 - boots image from bulk #1 image 2 - boo… |
| 1.3.6.1.4.1.6247.25.1.5.2.2 | Scalarcdd564UpgradeImage | read-write | current | Specifies which image will be overwritten during an upgrade: oldest - overwrites the oldest image determined by build date. image 1 - overwrites image 1 image … |
| 1.3.6.1.4.1.6247.25.1.5.3 | Nodecdd564ParamDatabase | |||
| 1.3.6.1.4.1.6247.25.1.5.3.1 | Scalarcdd564ParamImage | read-write | current | Specifies if configuration should be read from: paramFile - parameter file stored in flash factoryDefaults - the factory defaults |
| 1.3.6.1.4.1.6247.25.1.5.3.2 | Scalarcdd564SaveParamToFlash | read-write | current | This is a SET command to save the configuration to the parameter file in flash. |
| 1.3.6.1.4.1.6247.25.1.5.3.3 | Scalarcdd564ReloadParamFromFlash | read-write | current | This is a SET command to reload the configuration from the parameter file in flash. |
| 1.3.6.1.4.1.6247.25.1.5.3.4 | Scalarcdd564RestoreFactoryDefaults | read-write | current | This is a SET command that restore the configuration to the factory defaults. *** Imporant *** Setting this command ERASES the parameter file in flash. |
| 1.3.6.1.4.1.6247.25.1.5.4 | Nodecdd564RebootUnit | |||
| 1.3.6.1.4.1.6247.25.1.5.4.1 | Scalarcdd564Reboot | read-write | current | The is a SET command that will reboot the unit. *** Important *** The command will reboot the unit without saving the configuration to the parameter file in fl… |
| 1.3.6.1.4.1.6247.25.1.6 | Nodecdd564Statistics | |||
| 1.3.6.1.4.1.6247.25.1.6.1 | Nodecdd564IPRoutingStatistics | |||
| 1.3.6.1.4.1.6247.25.1.6.1.1 | Nodecdd564IPRoutingEthernet | |||
| 1.3.6.1.4.1.6247.25.1.6.1.1.1 | Scalarcdd564TotalPacketsToEthernet | read-only | current | The total number of IP packets routed to the Ethernet interface. |
| 1.3.6.1.4.1.6247.25.1.6.1.1.2 | Scalarcdd564TotalUnicastsToEthernet | read-only | current | The total number of Unicast packets routed to the Ethernet interface. |
| 1.3.6.1.4.1.6247.25.1.6.1.1.3 | Scalarcdd564TotalMulticastsToEthernet | read-only | current | The total number of Multicast packets routed to the Ethernet interface. |
| 1.3.6.1.4.1.6247.25.1.6.1.1.4 | Scalarcdd564TotalBroadcastsToEthernet | read-only | current | The total number of Broadcast packets routed to the Ethernet interface. |
| 1.3.6.1.4.1.6247.25.1.6.1.1.5 | Scalarcdd564TotalPacketsFromEthernet | read-only | current | The total number of IP packets received from the Ethernet interface. |
| 1.3.6.1.4.1.6247.25.1.6.1.2 | Nodecdd564IPRoutingSatellite | |||
| 1.3.6.1.4.1.6247.25.1.6.1.2.1 | Scalarcdd564TotalPacketsFromSatellite | read-only | current | The total number of IP packets received from the satellite interfaces. |
| 1.3.6.1.4.1.6247.25.1.6.1.3 | Nodecdd564IPRoutingEndstation | |||
| 1.3.6.1.4.1.6247.25.1.6.1.3.1 | Scalarcdd564TotalPacketsFromEndstation | read-only | current | The total number of packets received from the Endstation to be sent out one of the interfaces. |
| 1.3.6.1.4.1.6247.25.1.6.1.3.2 | Scalarcdd564TotalPacketsToEndstation | read-only | current | The total number of packets sent to the Endstation from one of the interfaces. |
| 1.3.6.1.4.1.6247.25.1.6.1.4 | Nodecdd564IPRoutingMisc | |||
| 1.3.6.1.4.1.6247.25.1.6.1.4.1 | Scalarcdd564IGMPPacketsReceived | read-only | current | The total number of IGMP packets received by the endstation. |
| 1.3.6.1.4.1.6247.25.1.6.1.4.2 | Scalarcdd564IPOptionPacketsReceived | read-only | current | The total number of packets received with IP Options in the IP header. |
| 1.3.6.1.4.1.6247.25.1.6.1.5 | Nodecdd564IPRoutingDropped | |||
| 1.3.6.1.4.1.6247.25.1.6.1.5.1 | Scalarcdd564TotalDroppedPackets | read-only | current | The total number of packets dropped by the router. |
| 1.3.6.1.4.1.6247.25.1.6.1.5.2 | Scalarcdd564DroppedPacketsBadIPHeader | read-only | current | The total number of packets dropped by the router because of a bad checksum in the IP header. |
| 1.3.6.1.4.1.6247.25.1.6.1.5.3 | Scalarcdd564DroppedPacketsBadBufferLength | read-only | current | The total number of packets dropped by the router because of a bad packet buffer length. |
| 1.3.6.1.4.1.6247.25.1.6.1.5.4 | Scalarcdd564DroppedPacketsBadIPVersion | read-only | current | The total number of packets dropped by the router because of the packet is not IPv4. Note: IPv6 packets are not support by the router. |
| 1.3.6.1.4.1.6247.25.1.6.1.5.5 | Scalarcdd564DroppedPacketsTTLExpired | read-only | current | The total number of packets dropped by the router because the TTL (time to live) in the IP header had expired (i.e. reached zero). |
| 1.3.6.1.4.1.6247.25.1.6.1.5.6 | Scalarcdd564DroppedPacketsNoRoute | read-only | current | The total number of packets dropped by the router because the packet did not match any route in the route table and could not be forwarded. |
| 1.3.6.1.4.1.6247.25.1.6.1.5.7 | Scalarcdd564DroppedPacketsNoARPEntry | read-only | current | The total number of packets dropped by the router because the ARP table did not have an ARP entry for the packet's next hop. |
| 1.3.6.1.4.1.6247.25.1.6.1.5.8 | Scalarcdd564DroppedPacketsFilteredMulticast | read-only | current | The total number of multicast packets dropped by the router because the multicast address is not being forwarded. |
| 1.3.6.1.4.1.6247.25.1.6.1.5.9 | Scalarcdd564DroppedPacketsMulticastDisableGroup | read-only | current | The total number of multicast packets dropped by the router because the multicast group is not being forwarded. |
| 1.3.6.1.4.1.6247.25.1.6.1.5.10 | Scalarcdd564DroppedPacketsFiltered | read-only | current | The total number of packets dropped by the router for the following reasons: 1. Boot 2. Flow Descriptor 3. Unknown Reason Code 4. Flow Correlator 5. Management… |
| 1.3.6.1.4.1.6247.25.1.6.1.5.11 | Scalarcdd564DroppedPacketsRouterQueueFull | read-only | current | The total number of packets dropped by the router because the router queue is full. |
| 1.3.6.1.4.1.6247.25.1.6.1.6 | Scalarcdd564IPRoutingClearCounters | read-write | current | This is a SET command to clear the IP routing counters. |
| 1.3.6.1.4.1.6247.25.1.6.2 | Nodecdd564EthernetStatistics | |||
| 1.3.6.1.4.1.6247.25.1.6.2.1 | Nodecdd564EthernetTxStats | |||
| 1.3.6.1.4.1.6247.25.1.6.2.1.1 | Scalarcdd564EtherTxGoodFrames | read-only | current | The number of transmitted good frames from the Ethernet interface. |
| 1.3.6.1.4.1.6247.25.1.6.2.1.2 | Scalarcdd564EtherTxMaxCollisions | read-only | current | The number of frames that were NOT transmitted because they encountered the maximum configured collisions. This counter should only increment when network is h… |
| 1.3.6.1.4.1.6247.25.1.6.2.1.3 | Scalarcdd564EtherTxLateCollisions | read-only | current | The number of frames that were NOT transmitted because they encountered collision outside the normal collision window. |
| 1.3.6.1.4.1.6247.25.1.6.2.1.4 | Scalarcdd564EtherTxDMAUnderrun | read-only | current | The number of frames that were either NOT transmitted or retransmitted due to Transmit DMA underrun. Underruns occur due to lack of PCI bandwidth resulting in … |
| 1.3.6.1.4.1.6247.25.1.6.2.1.5 | Scalarcdd564EtherTxLostCarrierSense | read-only | current | The number of frames transmitted by the device despite the fact that it detected the de-assertion of Transmit Lost Carrier Sense (CRS) during the transmission. |
| 1.3.6.1.4.1.6247.25.1.6.2.1.6 | Scalarcdd564EtherTxDeferred | read-only | current | The number of frames deferred before transmission due to activity on the link. |
| 1.3.6.1.4.1.6247.25.1.6.2.1.7 | Scalarcdd564EtherTxSingleCollisions | read-only | current | The number of transmitted frames that encountered only 1 collision. |
| 1.3.6.1.4.1.6247.25.1.6.2.1.8 | Scalarcdd564EtherTxMultipleCollisions | read-only | current | The number of transmitted frames that encountered more than 1 collision. |
| 1.3.6.1.4.1.6247.25.1.6.2.1.9 | Scalarcdd564EtherTxTotalCollisions | read-only | current | The total number of collisions that were encountered while attempting to transmit. This count includes late collisions and collisions from frames that encounte… |
| 1.3.6.1.4.1.6247.25.1.6.2.1.10 | Scalarcdd564EtherTxFlowControlPauseFrames | read-only | current | The number of flow control frames transmitted by the device. This count includes both the XOFF and XON frames transmitted by the device. |
| 1.3.6.1.4.1.6247.25.1.6.2.2 | Nodecdd564EthernetRxStats | |||
| 1.3.6.1.4.1.6247.25.1.6.2.2.1 | Scalarcdd564EtherRxGoodFrames | read-only | current | The number of frames properly received from the link. It is updated only after actual reception from the link is completed and all data bytes are stored in mem… |
| 1.3.6.1.4.1.6247.25.1.6.2.2.2 | Scalarcdd564EtherRxCRCErrorFrames | read-only | current | The number of aligned frames discarded due to CRC Errors. |
| 1.3.6.1.4.1.6247.25.1.6.2.2.3 | Scalarcdd564EtherRxAllignmentErrors | read-only | current | The number of frames that are both misaligned [in other words, CRS de-asserts on a non-octet boundary] and contain a CRC error. |
| 1.3.6.1.4.1.6247.25.1.6.2.2.4 | Scalarcdd564EtherRxResourceErrors | read-only | current | The number of good frames discarded due to unavailable resources. |
| 1.3.6.1.4.1.6247.25.1.6.2.2.5 | Scalarcdd564EtherRxFIFOOverrunErrors | read-only | current | The number of frames known to be lost because the internal receive FIFO overflowed [also known as receive overrun]. This can occur if the device is unable to g… |
| 1.3.6.1.4.1.6247.25.1.6.2.2.6 | Scalarcdd564EtherRxCollisionDetectErrors | read-only | current | The number of frames that encountered collision during reception. This is always zero. |
| 1.3.6.1.4.1.6247.25.1.6.2.2.7 | Scalarcdd564EtherRxShortFrames | read-only | current | The number of received frames that are shorter than the minimum frame length. |
| 1.3.6.1.4.1.6247.25.1.6.2.2.8 | Scalarcdd564EtherRxFlowControlPauseFrames | read-only | current | The number of flow control frames received by the device. This count includes both XOFF and XON frames received. |
| 1.3.6.1.4.1.6247.25.1.6.2.3 | Scalarcdd564EthernetClearCounters | read-write | current | Reset all ethernet transmit & receive counters. |
| 1.3.6.1.4.1.6247.25.1.6.3 | Nodecdd564SatelliteStatistics | |||
| 1.3.6.1.4.1.6247.25.1.6.3.1 | Tablecdd564SatelliteRxStatsTable | not-accessible | current | The table for Satellite interface statistics. |
| 1.3.6.1.4.1.6247.25.1.6.3.1.1 | Rowcdd564SatelliteRxStatsEntry | not-accessible | current | The entry for the Satellite interface statistics table. |
| 1.3.6.1.4.1.6247.25.1.6.3.1.1.1 | Columncdd564RxStatsIndex | read-only | current | The Rx index for the satellite interface, where index can be from 1 to 4. |
| 1.3.6.1.4.1.6247.25.1.6.3.1.1.2 | Columncdd564RxGoodFrames | read-only | current | The total number of good frames received over satellite interface. |
| 1.3.6.1.4.1.6247.25.1.6.3.1.1.3 | Columncdd564RxHeaderBytes | read-only | current | The count of HDLC header bytes received over the satellite interface. HDLC header = Control + HDLC address + Flow ID + CRC |
| 1.3.6.1.4.1.6247.25.1.6.3.1.1.4 | Columncdd564RxPayloadBytes | read-only | current | The count of payload bytes that were received over satellite interface, excluding any frame overhead. |
| 1.3.6.1.4.1.6247.25.1.6.3.1.1.5 | Columncdd564RxBadHDLCAddressErrors | read-only | current | The count of received frames that did not match any of the Rx HDLC addresses. |
| 1.3.6.1.4.1.6247.25.1.6.3.1.1.6 | Columncdd564RxPktProcCRCErrors | read-only | current | The Packet Processor CRC check is the second CRC check performed after the HDLC CRC check. It is the checksum calculated after Decryption and Payload Decompres… |
| 1.3.6.1.4.1.6247.25.1.6.3.1.1.7 | Columncdd564RxAbortOctetErrors | read-only | current | The count of aborted frames and octet error frames. Aborted frame: A frame is aborted when the frame is not complete and is terminated prematurely with the Abo… |
| 1.3.6.1.4.1.6247.25.1.6.3.1.1.8 | Columncdd564RxOverrunErrors | read-only | current | The count of received frames that exceeded the maximum frame length of 2K bytes or overflowed the buffer which stores complete HDLC frames. |
| 1.3.6.1.4.1.6247.25.1.6.3.1.1.9 | Columncdd564RxHDLCCRCErrors | read-only | current | The HDLC CRC is the first stage of the CRC check, before 3xDES and paylod Decompression. It indicates any errors due to the satellite link only. |
| 1.3.6.1.4.1.6247.25.1.6.3.1.1.10 | Columncdd564RxInvalidFlowIDErrors | read-only | current | The number of frames received where the flow ID did not match to a valid flow descriptor. |
| 1.3.6.1.4.1.6247.25.1.6.3.1.1.11 | Columncdd564RxSARReassembleErrors | read-only | current | The number of frames corresponding to a packet which had undergone segmentation and encountered an error in reassembly. |
| 1.3.6.1.4.1.6247.25.1.6.3.1.1.12 | Columncdd564RxHeaderDecompressionErrors | read-only | current | The number of frames with a compressed IP header that encountered an error in decompressing (rebuilding) the full IP header. |
| 1.3.6.1.4.1.6247.25.1.6.3.1.1.13 | Columncdd564RxMemoryAlignmentErrors | read-only | current | The number of frames which were incorrectly transferred (frame too small) from the Rx FPGA. |
| 1.3.6.1.4.1.6247.25.1.6.3.1.1.14 | Columncdd564RxCRCErrors | read-only | current | The number of frames with a CRC error detected by the Rx FPGA. |
| 1.3.6.1.4.1.6247.25.1.6.3.2 | Scalarcdd564SatelliteClearCounters | read-write | current | This is a SET command for clearing all the Satellite statistic counters. |
| 1.3.6.1.4.1.6247.25.1.7 | Nodecdd564Config | |||
| 1.3.6.1.4.1.6247.25.1.7.1 | Nodecdd564Rx | |||
| 1.3.6.1.4.1.6247.25.1.7.1.1 | Tablecdd564RxTable | not-accessible | current | The table of Demodulators. |
| 1.3.6.1.4.1.6247.25.1.7.1.1.1 | Rowcdd564RxEntry | not-accessible | current | The entry for the Demodulator table. |
| 1.3.6.1.4.1.6247.25.1.7.1.1.1.1 | Columncdd564RxTableIndex | read-only | current | The index for the Rx table, where index can be from 1 to 4. |
| 1.3.6.1.4.1.6247.25.1.7.1.1.1.2 | Columncdd564RxFEC | read-write | current | Rx FEC type where: 0 = Uncoded 6 = Turbo |
| 1.3.6.1.4.1.6247.25.1.7.1.1.1.3 | Columncdd564RxDemodulation | read-write | current | Rx demodulation type, where: 1 = QPSK 3 = 8-PSK 4 = 16-QAM |
| 1.3.6.1.4.1.6247.25.1.7.1.1.1.4 | Columncdd564RxCodeRate | read-write | current | Rx code rate, where 4 = Rate 3/4 5 = Rate 7/8 6 = Rate 0.95 7 = Rate 1/1 (Uncoded) |
| 1.3.6.1.4.1.6247.25.1.7.1.1.1.5 | Columncdd564RxDataRate | read-write | current | Rx data rate in bps (Varies based on chart below.) Units = bps Resolution = 1 bps FEC Type Modulation Code Rate Data Rate High Rate Turbo QPSK Rate 3/4 16.0 Kb… |
| 1.3.6.1.4.1.6247.25.1.7.1.1.1.6 | Columncdd564RxFrequency | read-write | current | Rx frequency for L-Band and IF-Band modes. L-Band is 950 MHz to 1950 MHz. IF-Band is 50 MHz to 90 MHz and 100 MHz to 180 MHz. Units = Hz. Resolution = 100 Hz. |
| 1.3.6.1.4.1.6247.25.1.7.1.1.1.7 | Columncdd564RxAcquisitionSweepWidth | read-write | current | Rx +/- acquisition sweep range of demodulator, in KHz, ranging from: +/- 1 to +/- 32 KHz (rates < 625 ksym/second) or +/- 1 to 200 KHz (rates >= 625 ksym/secon… |
| 1.3.6.1.4.1.6247.25.1.7.1.1.1.8 | Columncdd564RxDescrambling | read-write | current | Rx descrambler state, where: 0 = Off 1 = On (default descrambler type) 2 = On - IESS-315 (Turbo only) |
| 1.3.6.1.4.1.6247.25.1.7.1.1.1.9 | Columncdd564RxBufferSize | read-write | current | Rx buffer size, where: 0 = Buffer disabled (Clock mode = Rx satellite) |
| 1.3.6.1.4.1.6247.25.1.7.1.1.1.10 | Columncdd546RxSpectrumInversion | read-write | current | Rx spectrum inversion, where: 0 = Normal 1 = Rx spectrum inverted |
| 1.3.6.1.4.1.6247.25.1.7.1.1.1.11 | Columncdd564RxDataInversion | read-write | current | Invert receive data, where: 0 = Normal 1 = Inverted |
| 1.3.6.1.4.1.6247.25.1.7.1.1.1.12 | Columncdd564RxEbNoAlarmPoint | read-write | current | Rx Eb/No alarm point in 0.1 dB, with a range between 0.1 dB and 16 dB. Units = 0.1 dB Resolution = 0.1 dB |
| 1.3.6.1.4.1.6247.25.1.7.1.1.1.13 | Columncdd564RxRecenterBuffer | read-write | current | This is a SET command that recenters the receive Plesiochronous/Doppler buffer. |
| 1.3.6.1.4.1.6247.25.1.7.1.1.1.14 | Columncdd564RxSymbolRate | read-only | current | Rx symbol rate in symbols per second (sym) Units = sym Resolution = 1 sym |
| 1.3.6.1.4.1.6247.25.1.7.2 | Nodecdd564AlarmMask | |||
| 1.3.6.1.4.1.6247.25.1.7.2.1 | Tablecdd564AlarmMaskTable | not-accessible | current | Description. |
| 1.3.6.1.4.1.6247.25.1.7.2.1.1 | Rowcdd564AlarmMaskEntry | not-accessible | current | Description. |
| 1.3.6.1.4.1.6247.25.1.7.2.1.1.1 | Columncdd564AlarmMaskIndex | read-only | current | The index for the Demodulator. |
| 1.3.6.1.4.1.6247.25.1.7.2.1.1.2 | Columncdd564AGCAlarmMask | read-write | current | Rx AGC alarm mask, where: 0 = Unmasked 1 = Masked |
| 1.3.6.1.4.1.6247.25.1.7.2.1.1.3 | Columncdd564EbNoAlarmMask | read-write | current | Eb/No alarm mask, where: 0 = Unmasked 1 = Masked |
| 1.3.6.1.4.1.6247.25.1.7.2.1.1.5 | Columncdd564LNBAlarmMask | read-write | current | LNB alarm mask, where: 0 = Unmasked 1 = Masked |
| 1.3.6.1.4.1.6247.25.1.7.3 | Nodecdd564Reference | |||
| 1.3.6.1.4.1.6247.25.1.7.3.1 | Scalarcdd564ReferenceFrequency | read-write | current | External reference frequency, where: 0 = Internal 10 MHz |
| 1.3.6.1.4.1.6247.25.1.7.3.2 | Scalarcdd564InternalReferenceAdjust | read-write | current | Internal Reference Adjust, from -999 to +999. Units = KHz |
| 1.3.6.1.4.1.6247.25.1.7.4 | Nodecdd564LNB | |||
| 1.3.6.1.4.1.6247.25.1.7.4.1 | Tablecdd564LNBTable | not-accessible | current | The table for LNBs. |
| 1.3.6.1.4.1.6247.25.1.7.4.1.1 | Rowcdd564LNBEntry | not-accessible | current | The entry for the LNBs table. |
| 1.3.6.1.4.1.6247.25.1.7.4.1.1.1 | Columncdd564LNBIndex | read-only | current | The index for the LNB.. |
| 1.3.6.1.4.1.6247.25.1.7.4.1.1.2 | Columncdd564LNBDCPower | read-write | current | LNB power control, where: 0 = Off 1 = On, 13V LNB voltage 2 = On, 18V LNB voltage 3 = On, 24V LNB voltage |
| 1.3.6.1.4.1.6247.25.1.7.4.1.1.3 | Columncdd564LNB10MHzReference | read-write | current | LNB 10MHz frequency reference, where: 0 = Disable LNB 10MHz reference 1 = Enable LNB 10MHz reference |
| 1.3.6.1.4.1.6247.25.1.7.4.1.1.4 | Columncdm564LLNBLowCurrentLimit | read-write | current | LNB lower alarm limit for current, between 10 and 400 mA. |
| 1.3.6.1.4.1.6247.25.1.7.4.1.1.5 | Columncdd564LNBHighCurrentLimit | read-write | current | LNB upper alarm limit for current, between 50 and 600 mA. |
| 1.3.6.1.4.1.6247.25.1.7.4.1.1.6 | Columncdd564LNBLOFrequency | read-write | current | LNB receieve LO frequency, in the range of 3000 to 65000 MHz. Setting a 0 disables the feature. Terminal Frequency = LNB_LO +/- Rx_Frequency (depending on High… |
| 1.3.6.1.4.1.6247.25.1.7.4.1.1.7 | Columncdd564LNBLOMix | read-write | current | LO frequency mix, where: 0 = Low-side mix 1 = High-side mix |
| 1.3.6.1.4.1.6247.25.1.8 | Nodecdd564Monitor | |||
| 1.3.6.1.4.1.6247.25.1.8.1 | Nodecdd564UnitMonitor | |||
| 1.3.6.1.4.1.6247.25.1.8.1.1 | Scalarcdd564SerialNumber | read-only | current | Unit's 9-digit serial number. |
| 1.3.6.1.4.1.6247.25.1.8.1.2 | Scalarcdd564SoftwareRevision | read-only | current | Unit returns the value of the internal software revision installed in the unit, in the form of x.x.x. |
| 1.3.6.1.4.1.6247.25.1.8.1.3 | Scalarcdd564ModelNumber | read-only | current | Unit's model number. |
| 1.3.6.1.4.1.6247.25.1.8.1.4 | Scalarcdd564UnitAlarm | read-only | current | Modem Unit Faults: Value Description of unit fault 0 No faults 1 +5 Volt power supply 2 +12 Volt power supply 3 -5 Volt power supply 4 +23 Volt power supply 5 … |
| 1.3.6.1.4.1.6247.25.1.8.1.5 | Scalarcdd564Temperature | read-only | current | Unit returns the value of the internal temperature, in degrees Celsius. |
| 1.3.6.1.4.1.6247.25.1.8.2 | Nodecdd564RxMonitor | |||
| 1.3.6.1.4.1.6247.25.1.8.2.1 | Tablecdd564RxMonitorTable | not-accessible | current | The table for monitoring demodulators. |
| 1.3.6.1.4.1.6247.25.1.8.2.1.1 | Rowcdd564RxMonitorEntry | not-accessible | current | The entry for the demoduator monitor table. |
| 1.3.6.1.4.1.6247.25.1.8.2.1.1.1 | Columncdd564RxMonitorIndex | read-only | current | The index for the demodulator monitor table. |
| 1.3.6.1.4.1.6247.25.1.8.2.1.1.2 | Columncdd564RxAlarm | read-only | current | Modem RX Traffic Faults Value Description of status parameter 0 Rx Traffic OK 1 Demodulator unlocked 3 AGC Alarm - signal out of range 10 Buffer underflow 11 B… |
| 1.3.6.1.4.1.6247.25.1.8.2.1.1.3 | Columncdd564RxEbNo | read-only | current | Unit returns the value of Eb/No, between 0 and 16 db. Units = 0.1 dB Resolution 0.1 dB Returns 999 if demod is unlocked. For values greater than 16 dB, the rep… |
| 1.3.6.1.4.1.6247.25.1.8.2.1.1.4 | Columncdd564RxSignalLevel | read-only | current | Unit returns the value of the Rx signal level, in dBm, between -20 and -99 dBm, Returns -100 if signal is less than -99dBm. Returns -19 if signal is greater th… |
| 1.3.6.1.4.1.6247.25.1.8.2.1.1.5 | Columncdd564RxFreqOffset | read-only | current | Unit returns the value of the measured frequency offset of the carrier being demodulated in Hz. Units = Hz. Resolution 100 Hz. Range = -200,000 Hz to 0 Hz and … |
| 1.3.6.1.4.1.6247.25.1.8.2.1.1.7 | ColumncddRxBERMultiplier | read-only | current | Estimated corrected BER. The BER is calculated by multiplying the Multiplier by 10E-10. Calculuation: RxBER = (Multiplier) * 0.0000000001 Returns 2147483647 (m… |
| 1.3.6.1.4.1.6247.25.1.8.3 | Nodecdd564LNBMonitor | |||
| 1.3.6.1.4.1.6247.25.1.8.3.1 | Tablecdd564LNBMonitorTable | not-accessible | current | The table for monitoring LNBs. |
| 1.3.6.1.4.1.6247.25.1.8.3.1.1 | Rowcdd564LNBMonitorEntry | not-accessible | current | The entry for the LNBs monitoring table. |
| 1.3.6.1.4.1.6247.25.1.8.3.1.1.1 | Columncdd564LNBMonitorIndex | read-only | current | The index for the LNBs monitoring table. |
| 1.3.6.1.4.1.6247.25.1.8.3.1.1.2 | Columncdd564LNBAlarm | read-only | current | LNB alarms Value Description of status parameter 0 No LNB faults 7 LNB current 9 LNB voltage |
| 1.3.6.1.4.1.6247.25.1.8.3.1.1.3 | Columncdd564LNBCurrent | read-only | current | Indicates the value of the LNB current, between 0 and 999 mA. |
| 1.3.6.1.4.1.6247.25.1.8.3.1.1.4 | Columncdd564LNBVoltage | read-only | current | Indicates the value of the LNB voltage, between 0 and 30 volts. Units = 0.1 volts If not available, response is 0. |
| 1.3.6.1.4.1.6247.25.1.8.3.1.1.5 | Columncdd564LNBTerminalRxFreq | read-only | current | Terminal Rx frequency = LNB LO +/- Rx_Frequency (depending on LO mix) Units = 100 Hz Resolution = 100 Hz Returns 0 if LNB_LO is zero. |
| 1.3.6.1.4.1.6247.25.1.8.4 | Nodecdd564StoredEvents | |||
| 1.3.6.1.4.1.6247.25.1.8.4.1 | Tablecdd564StoredEventsTable | not-accessible | current | The table of stored events for all four demods. |
| 1.3.6.1.4.1.6247.25.1.8.4.1.1 | Rowcdd564StoredEventsEntry | not-accessible | current | The entry for stored events table for all 4 demods. |
| 1.3.6.1.4.1.6247.25.1.8.4.1.1.1 | Columncdd564EventDemod | read-only | current | The demodulator index for which event log is being returned. |
| 1.3.6.1.4.1.6247.25.1.8.4.1.1.2 | Columncdd564EventIndex | read-only | current | The index for a demod's stored events table. |
| 1.3.6.1.4.1.6247.25.1.8.4.1.1.3 | Columncdd564EventDescription | read-only | current | Event description string with the following format seprated by commas: 1. Date in form dd/mm/yy, where: dd = day of the month (01 to 31) mm = month (01 to 12) … |
| 1.3.6.1.4.1.6247.25.1.8.4.2 | Scalarcdd564ClearAllStoredEvents | read-write | current | This is a SET command to clear the event log for one of the four demods (1 - 4). |
| 1.3.6.1.4.1.6247.25.1.8.5 | Nodecdd564StoredStatistics | |||
| 1.3.6.1.4.1.6247.25.1.8.5.1 | Tablecdd564StoredStatisticsTable | not-accessible | current | The table of stored statistics for all four demods. |
| 1.3.6.1.4.1.6247.25.1.8.5.1.1 | Rowcdd564StoredStatisticsEntry | not-accessible | current | The entry for stored statistics table for all four demods. |
| 1.3.6.1.4.1.6247.25.1.8.5.1.1.1 | Columncdd564StatisticDemod | read-only | current | The demod index for which statistics table is being returned. |
| 1.3.6.1.4.1.6247.25.1.8.5.1.1.2 | Columncdd564StatisticIndex | read-only | current | The index in one of the four demod's stored statistics table. |
| 1.3.6.1.4.1.6247.25.1.8.5.1.1.3 | Columncdd564StatisticDate | read-only | current | The date of the statistic in the form dd/mm/yy, where: dd = day of the month (01 to 31) mm = month (01 to 12) yy = year (00 to 99) |
| 1.3.6.1.4.1.6247.25.1.8.5.1.1.4 | Columncdd564StatisticTime | read-only | current | The time of the statistic in the form hh:mm:ss, indicating the time from midnight, where: hh = hours (00 to 23) mm = minutes (00 to 59) ss = seconds (00 to 59) |
| 1.3.6.1.4.1.6247.25.1.8.5.1.1.5 | Columncdd564StatisticAvgEbNo | read-only | current | Minimum Eb/No during sample period. Units = 0.1 dB. Returns 999 if demod was unlocked during sample period. |
| 1.3.6.1.4.1.6247.25.1.8.5.1.1.6 | Columncdd564StatisticMinEbNo | read-only | current | Minimum Eb/No during sample period. Units = 0.1 dB. Returns 999 if demod was unlocked during sample period. |
| 1.3.6.1.4.1.6247.25.1.8.5.2 | Tablecdd564StoredStatisticsConfigTable | not-accessible | current | The configuration for the stored statistics (per Demod). |
| 1.3.6.1.4.1.6247.25.1.8.5.2.1 | Rowcdd564StoredStatisticsConfigEntry | not-accessible | current | The entry for the stored statistics configuration table. |
| 1.3.6.1.4.1.6247.25.1.8.5.2.1.1 | Columncdd564StoredStatisticsConfigIndex | read-only | current | The index for the Demodulator. |
| 1.3.6.1.4.1.6247.25.1.8.5.2.1.2 | Columncdd564StatisticsSampleInterval | read-write | current | Used to set the sample interval for the statistics logging function, where the enumerated lists goes from 0 to 9 in 10 minute steps. Setting 0 disables the sta… |
| 1.3.6.1.4.1.6247.25.1.8.5.3 | Scalarcdd564ClearAllStoredStatistics | read-write | current | This is a SET command to clear the statistics log for one of the four demods (1 - 4). |
| 1.3.6.1.4.1.6247.25.1.9 | Nodecdd564Util | |||
| 1.3.6.1.4.1.6247.25.1.9.4 | Scalarcdd564RTCDate | read-write | current | A date in the form dd/mm/yy, where dd = day of the month (01 to 31) mm = month (01 to 12) yy = year (00 to 99) |
| 1.3.6.1.4.1.6247.25.1.9.5 | Scalarcdd564RTCTime | read-write | current | A time in the form hh:mm:ss, indicating the time from midnight, where: hh = hours (00 to 23) mm = minutes (00 to 59) ss = seconds (00 to 59) |
| 1.3.6.1.4.1.6247.25.1.9.6 | Tablecdd564CircuitIDTable | not-accessible | current | The table for Circuit IDs (Per Demod). |
| 1.3.6.1.4.1.6247.25.1.9.6.1 | Rowcdd564CircuitIDEntry | not-accessible | current | The entry for the circuit ID table. |
| 1.3.6.1.4.1.6247.25.1.9.6.1.1 | Columncdd564CircuitIDIndex | read-only | current | The index for the Demodulator. |
| 1.3.6.1.4.1.6247.25.1.9.6.1.2 | Columncdd564CircuitID | read-write | current | Sets or queries the user-defined Circuit ID string, which is a fixed length of 24 characters. Valid characters include: Space ( ) * + - , . / 0 thru 9 and A th… |
| 1.3.6.1.4.1.6247.25.2 | Nodecdd564Notifications | |||
| 1.3.6.1.4.1.6247.25.2.0 | Nodecdd564NotificationsPrefix | |||
| 1.3.6.1.4.1.6247.25.2.0.1 | Notificationcdd564UnitAlarmNotification | current | Trap for Unit alarms. | |
| 1.3.6.1.4.1.6247.25.2.0.2 | Notificationcdd564RxAlarmNotification | current | Trap for Rx alarms. | |
| 1.3.6.1.4.1.6247.25.2.0.3 | Notificationcdd564LNBAlarmNotification | current | Trap for LNB alarms. | |
| 1.3.6.1.4.1.6247.25.3 | Nodecdd564Conformance | |||
| 1.3.6.1.4.1.6247.25.3.1 | Nodecdd564Groups | |||
| 1.3.6.1.4.1.6247.25.3.1.1 | Groupcdd564ObjectsGroup | current | CDD-564 Objects Group. | |
| 1.3.6.1.4.1.6247.25.3.1.2 | Groupcdd564NotificationsGroup | current | CDD-564 Trap Group. | |
| 1.3.6.1.4.1.6247.25.3.2 | Nodecdd564Compliances | |||
| 1.3.6.1.4.1.6247.25.3.2.1 | Compliancecdd564Compliance | current | CDD-564 Compliance. |