CENTILLION-ATMCFG-MIB
81 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.930.2.2.1.1 | NodeatmElanConfig | |||
| 1.3.6.1.4.1.930.2.2.1.1.1 | TableatmElanConfigTable | not-accessible | mandatory | ATM elan table |
| 1.3.6.1.4.1.930.2.2.1.1.1.1 | RowatmElanConfigEntry | not-accessible | mandatory | ATM elan table. Each entry is indexed by one field: elan id. |
| 1.3.6.1.4.1.930.2.2.1.1.1.1.1 | ColumnatmElanIndex | read-write | mandatory | The index to the atm elan table. support total of 32 circuits. |
| 1.3.6.1.4.1.930.2.2.1.1.1.1.2 | ColumnatmElanType | read-write | mandatory | The elan type. |
| 1.3.6.1.4.1.930.2.2.1.1.1.1.3 | ColumnatmElanEnable | read-write | mandatory | Enable bit of the elan. 1 = enable elan 2 = disable elan |
| 1.3.6.1.4.1.930.2.2.1.1.1.1.4 | ColumnatmElanAllCkts | read-only | mandatory | Return all pvc circuits that belong to this elan. Each circuit id is a 32 bit field |
| 1.3.6.1.4.1.930.2.2.1.1.1.1.5 | ColumnatmElanVirtualCard | read-only | mandatory | Virtual card number. |
| 1.3.6.1.4.1.930.2.2.1.1.1.1.6 | ColumnatmElanVirtualPort | read-only | mandatory | Virtual port number. Currently this number is the Elan id |
| 1.3.6.1.4.1.930.2.2.1.1.1.1.7 | ColumnatmElanVirtualSegmentId | read-only | mandatory | Virtual Segment ID of the segment that this Elan is a member of |
| 1.3.6.1.4.1.930.2.2.1.1.1.1.8 | ColumnatmElanStatus | read-write | mandatory | The current status of the entry. Entries may be added by specifying a value of valid, and removed by setting the status to invalid. |
| 1.3.6.1.4.1.930.2.2.1.1.1.1.9 | ColumnatmElanVirtualSegmentType | read-write | mandatory | The virtual segment type. |
| 1.3.6.1.4.1.930.2.2.1.1.1.1.10 | ColumnatmElanBridgeGroupId | read-only | mandatory | Spanning Tree Group ID of the spanning tree group that the virtual segment and this Elan are members of. |
| 1.3.6.1.4.1.930.2.2.1.1.1.1.11 | ColumnatmElanMaxUnknownFrameCount | read-write | mandatory | Maximum Unknown Frame Count. See the description of atmElanMaxUnknownFrameTime below. |
| 1.3.6.1.4.1.930.2.2.1.1.1.1.12 | ColumnatmElanMaxUnknownFrameTime | read-write | mandatory | Maxinum Unknown Frame Time. Within the period of time defined by the Maxinum Unknown Frame Time, a LAN Client will send no more than Maxinum Unknown Frame Coun… |
| 1.3.6.1.4.1.930.2.2.1.1.1.1.13 | ColumnatmElanVcBridgingEnable | read-write | mandatory | This object is used to enable or disable VC Bridging on the vport. The default value for this object is disable. |
| 1.3.6.1.4.1.930.2.2.1.2 | NodeatmCktTable | |||
| 1.3.6.1.4.1.930.2.2.1.2.1 | TableatmPktCktTable | not-accessible | mandatory | ATM virtual circuit table. |
| 1.3.6.1.4.1.930.2.2.1.2.1.1 | RowatmPktCktEntry | not-accessible | mandatory | ATM Packet Circuit table entry. Each entry is indexed by one field: The circuit index. |
| 1.3.6.1.4.1.930.2.2.1.2.1.1.1 | ColumnatmPktCktIndex | read-write | mandatory | The index to the packet circuit table. support total of 256 circuits. |
| 1.3.6.1.4.1.930.2.2.1.2.1.1.2 | ColumnatmPktCktPriority | read-write | mandatory | Priority bit of the circuit. 1 = normal priority 2 = high priority |
| 1.3.6.1.4.1.930.2.2.1.2.1.1.3 | ColumnatmPktCktEnable | read-write | mandatory | Enable bit of the circuit. 1 = enable circuit 2 = disable circuit |
| 1.3.6.1.4.1.930.2.2.1.2.1.1.4 | ColumnatmPktCktType | read-write | mandatory | type bit of the circuit. 1 = virtual circuit 2 = virtual path circuit |
| 1.3.6.1.4.1.930.2.2.1.2.1.1.5 | ColumnatmPktCktCost | read-write | mandatory | The cost of the circuit. range from 0 to 255 with 0 the least cost. |
| 1.3.6.1.4.1.930.2.2.1.2.1.1.6 | ColumnatmPktCktElanIndex | read-write | mandatory | The elan id this circuit belongs to. |
| 1.3.6.1.4.1.930.2.2.1.2.1.1.7 | ColumnatmPktCktCardPort | read-write | deprecated | The atm card/port of the circuit. The card/port takes one byte. This will be replaced by atmPktCktCardPort2 |
| 1.3.6.1.4.1.930.2.2.1.2.1.1.8 | ColumnatmPktCktVpi | read-write | mandatory | The packet circuit vpi number. |
| 1.3.6.1.4.1.930.2.2.1.2.1.1.9 | ColumnatmPktCktVci | read-write | mandatory | The packet circuit vci number. |
| 1.3.6.1.4.1.930.2.2.1.2.1.1.10 | ColumnatmPktCktStatus | read-write | mandatory | The current status of the entry. Entries may be added by specifying a value of valid, and removed by setting the status to invalid. |
| 1.3.6.1.4.1.930.2.2.1.2.1.1.11 | ColumnatmPktCktCardPort2 | read-write | mandatory | This mib is added for 24 ports card. This will replace atmPktCktCardPort. The atm card/port of the circuit. The card and port takes one byte each. |
| 1.3.6.1.4.1.930.2.2.1.2.2 | TableatmCellCktTable | not-accessible | mandatory | ATM virtual circuit table. |
| 1.3.6.1.4.1.930.2.2.1.2.2.1 | RowatmCellCktEntry | not-accessible | mandatory | ATM Cell Circuit table entry. Each entry is indexed by one field: The circuit index. |
| 1.3.6.1.4.1.930.2.2.1.2.2.1.1 | ColumnatmCellCktIndex | read-write | mandatory | The index to the packet circuit table. support total of 256 circuits. |
| 1.3.6.1.4.1.930.2.2.1.2.2.1.2 | ColumnatmCellCktPriority | read-write | mandatory | Priority bit of the circuit. 1 = normal priority 2 = high priority |
| 1.3.6.1.4.1.930.2.2.1.2.2.1.3 | ColumnatmCellCktEnable | read-write | mandatory | Enable bit of the cell circuit. 1 = enable cell circuit 2 = disable cell circuit |
| 1.3.6.1.4.1.930.2.2.1.2.2.1.4 | ColumnatmCellCktType | read-write | mandatory | type bit of the circuit. 1 = virtual circuit 2 = virtual path circuit |
| 1.3.6.1.4.1.930.2.2.1.2.2.1.5 | ColumnatmCellCktNumEndpt | read-write | mandatory | Number of endpoints in the circuit. An endpoint is defined as a combination of card/port/vpi/vci. |
| 1.3.6.1.4.1.930.2.2.1.2.2.1.6 | ColumnatmCellCktEndptList | read-write | mandatory | List of endpoints for the circuit. Each endpoint includes Card (32 bit) Port (32 bit) Vpi (32 bit) Vci (32 bit) |
| 1.3.6.1.4.1.930.2.2.1.2.2.1.7 | ColumnatmCellCktStatus | read-write | mandatory | The current status of the entry. Entries may be added by specifying a value of valid, and removed by setting the status to invalid. |
| 1.3.6.1.4.1.930.2.2.1.3 | NodeatmPortConfig | |||
| 1.3.6.1.4.1.930.2.2.1.3.1 | TableatmPortConfigTable | not-accessible | mandatory | ATM Hardware Port Configuration Table |
| 1.3.6.1.4.1.930.2.2.1.3.1.1 | RowatmPortConfigEntry | not-accessible | mandatory | ATM port configuration table. Each entry is indexed by two fields: The card index and the port index. |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.1 | ColumnatmPortCardIndex | read-write | mandatory | This field indicates the ATM card id. |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.2 | ColumnatmPortPortIndex | read-write | mandatory | This field indicates ATM port id. |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.3 | ColumnatmPortEnable | read-write | mandatory | This field indicates if the ATM port is enabled or disabled. 2=Disable, 1=Enable. When the port is disabled, no cell traffic will be ggenerated nor accepted an… |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.4 | ColumnatmPortLoopTimingEnable | read-write | mandatory | This field indicates if loop timing is enabled or disabled. 2=Disable, 1=Enable. Exception: this field is read-only for 5782 Goldfish Module. That is, the user… |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.5 | ColumnatmPortHecCosetEnable | read-write | mandatory | This field indicates if heccoset is enabled or disabled. 2=Disable, 1=Enable. When the port is disabled, no cell traffic will be ggenerated nor accepted and no… |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.6 | ColumnatmPortHecCorrectionEnable | read-write | mandatory | This field indicates if hec correction is enabled or disabled. 2=Disable, 1=Enable. Exception: this field is read-only for 5782 Goldfish Module. That is, the u… |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.7 | ColumnatmPortHardwareFrameMode | read-only | mandatory | This field indicates the atm frame mode detected by hardware, Sonet, SDH or NotApply (no cable plugged in) or other (value other than sonet and sdh). |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.8 | ColumnatmPortLocalLoopEnable | read-write | mandatory | This field indicates if local loop is enabled or disabled. 2=Disable, 1=Enable. Exception: this field is read-only for 5782 Goldfish Module. That is, the user … |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.9 | ColumnatmPortRemoteLoopEnable | read-write | mandatory | This field indicates if loop timing is enabled or disabled. 2=Disable, 1=Enable. When the port is disabled, no cell traffic will be ggenerated nor accepted and… |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.10 | ColumnatmPortForceHecErrorEnable | read-write | mandatory | This field indicates if forcing cell header checksum error is enabled or disabled. 2=Disable, 1=Enable. Exception: this field is read-only for 5782 Goldfish Mo… |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.11 | ColumnatmPortScramblingEnable | read-write | mandatory | This field indicates if scrambing is enabled or disabled. 2=Disable, 1=Enable. Exception: this field is read-only for 5782 Goldfish Module. That is, the user i… |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.12 | ColumnatmPortSigEntityType | read-write | mandatory | This object indicates the type of the siganlling entity that is associated with this ATM port. The type of a signalling instance can either be no signalling, U… |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.13 | ColumnatmPortSigEntityRole | read-write | mandatory | This object indicates the role of the signalling entity that is associated with this ATM port. When the object atmPortSigEntity is set to a value other than un… |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.14 | ColumnatmPortSigVersion | read-write | mandatory | This object indicates the version of the siganlling entity that is associated with this ATM port. This object is always set to other(1) when the object atmPort… |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.15 | ColumnatmPortSigIlmi | read-write | mandatory | This object is used to enable/disable ILMI. Exception: this field is read-only for 5782 Goldfish Module. That is, the user is not allowed to configure the port… |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.16 | ColumnatmPortAdminFrameMode | read-write | mandatory | When read, this object returns the configured atm frame mode. When set, only modes sonet and sdh are supported. |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.17 | ColumnatmPortSscopStatus | read-only | mandatory | Indicates the operational status of the service specific connection-oriented protocol ( SSCOP ). SSCOP's function is to correct transmission errors or losses b… |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.18 | ColumnatmPortStatusEnquiryEnable | read-write | mandatory | This object is used to enable or disable the Status enquiry for this logical link. The default value for this object is enabled except for the UNI links. Note … |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.19 | ColumnatmPortTimerT309 | read-write | mandatory | Timer value of timer T309.T309 is a SAAL disconnect timer. The T309 timer is started when SAAL disconnect is sent and it is stopped when SAAL disconnect is sen… |
| 1.3.6.1.4.1.930.2.2.1.3.1.1.20 | ColumnatmPortTrafficShapingEnable | read-write | mandatory | This field indicates if traffic shaping for the ATM port is enabled or disabled. When traffic shaping is disabled, the port operates at full wire rate. When tr… |
| 1.3.6.1.4.1.930.2.2.1.4 | NodeatmSysConfig | |||
| 1.3.6.1.4.1.930.2.2.1.4.1 | ScalaratmSysSigEnable | read-write | mandatory | This object is used to enable or disable the ATM signalling task within the switch. Note that by disabling the ATM signalling, the switch will not be able to s… |
| 1.3.6.1.4.1.930.2.2.1.5 | NodeatmPortLogConfig | |||
| 1.3.6.1.4.1.930.2.2.1.5.1 | ScalaratmMaxPortLogConfig | read-only | mandatory | The maximum number of logical links in the atmPortLogConfigTable. |
| 1.3.6.1.4.1.930.2.2.1.5.2 | ScalaratmCurPortLogConfig | read-only | mandatory | The current number of logical links in the atmPortLogConfigTable. |
| 1.3.6.1.4.1.930.2.2.1.5.3 | TableatmPortLogConfigTable | not-accessible | mandatory | ATM Logical link Configuration Table. |
| 1.3.6.1.4.1.930.2.2.1.5.3.1 | RowatmPortLogConfigEntry | not-accessible | mandatory | ATM logical link configuration table. Each entry is indexed by three fields: The card index, port index and the VPI. |
| 1.3.6.1.4.1.930.2.2.1.5.3.1.1 | ColumnatmPortLogConfigCardIndex | read-only | mandatory | This field indicates the ATM card id. |
| 1.3.6.1.4.1.930.2.2.1.5.3.1.2 | ColumnatmPortLogConfigPortIndex | read-only | mandatory | This field indicates ATM port id. |
| 1.3.6.1.4.1.930.2.2.1.5.3.1.3 | ColumnatmPortLogConfigVPI | read-only | mandatory | This field indicates ATM virtual path identifier. |
| 1.3.6.1.4.1.930.2.2.1.5.3.1.4 | ColumnatmPortLogConfigStatus | read-write | mandatory | This object is used to add, modify or delete a logical link. A value of other(1) will be returned for read operations on logical links. The value add(3) is wri… |
| 1.3.6.1.4.1.930.2.2.1.5.3.1.5 | ColumnatmPortLogConfigSigEntityType | read-write | mandatory | This object indicates the type of the signaling entity associated with this ATM port. The type of a signaling can either be no signaling, User-Network Interfac… |
| 1.3.6.1.4.1.930.2.2.1.5.3.1.6 | ColumnatmPortLogConfigSigEntityRole | read-write | mandatory | This object indicates the role of the signaling entity that is associated with this ATM logical port. This object can only be set to user(2) or netw(3). A valu… |
| 1.3.6.1.4.1.930.2.2.1.5.3.1.7 | ColumnatmPortLogConfigSigVersion | read-write | mandatory | This object indicates the version of the signaling entity that is associated with this ATM port. When atmPortLogConfigSigEntityType is set to pnni(4), the sign… |
| 1.3.6.1.4.1.930.2.2.1.5.3.1.8 | ColumnatmPortLogConfigSigIlmi | read-write | mandatory | This object is used to enable or disable ILMI. When atmPortLogConfigSigEntityType is set to uni(2) and atmPortLogConfigSigVersion is set to auto(2), this objec… |
| 1.3.6.1.4.1.930.2.2.1.5.3.1.9 | ColumnatmPortLogConfigAdmWeightCbr | read-write | mandatory | The Administrative weight of this VP for the constant bit rate service category. A value of zero is returned if the link is non-PNNI. |
| 1.3.6.1.4.1.930.2.2.1.5.3.1.10 | ColumnatmPortLogConfigAdmWeightUbr | read-write | mandatory | The Administrative weight of this VP for the unspecified bit rate service category. A value of zero is returned if the link is non-PNNI. |
| 1.3.6.1.4.1.930.2.2.1.5.3.1.11 | ColumnatmPortLogConfigStatusEnquiryEnable | read-write | mandatory | This object is used to enable or disable the Status enquiry. Note that this parametwer is used only if the ATM signalling is enabled. |
| 1.3.6.1.4.1.930.2.2.1.5.3.1.12 | ColumnatmPortLogConfigTimerT309 | read-write | mandatory | Timer value of timer T309.T309 is a SAAL disconnect timer. The T309 timer is started when SAAL disconnect is sent and it is stopped when SAAL disconnect is sen… |