CENTILLION-ATMMON-MIB
54 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.930.2.2.2.1 | NodeatmPortMonitor | |||
| 1.3.6.1.4.1.930.2.2.2.1.1 | TableatmPortStatTable | not-accessible | mandatory | ATM Port Statistics |
| 1.3.6.1.4.1.930.2.2.2.1.1.1 | RowatmPortStatEntry | not-accessible | mandatory | ATM Port Statistics. Each entry is indexed by two fields: The card number and the port number. |
| 1.3.6.1.4.1.930.2.2.2.1.1.1.1 | ColumnatmStatCardId | read-only | mandatory | This field is the card index |
| 1.3.6.1.4.1.930.2.2.2.1.1.1.2 | ColumnatmStatPortId | read-only | mandatory | This field is the port index |
| 1.3.6.1.4.1.930.2.2.2.1.1.1.3 | ColumnatmSigDetected | read-only | mandatory | This bit field indicates if the port receives signal from the remote ATM port. 1= signal present, 2= no signal. |
| 1.3.6.1.4.1.930.2.2.2.1.1.1.4 | ColumnatmRxBadHecCell | read-only | mandatory | The number of cells received that has a bad ATM cell header (HEC). The error is usually due to a physical layer problem. For example, when the fiber is first c… |
| 1.3.6.1.4.1.930.2.2.2.1.1.1.5 | ColumnatmRxDmaDropCell | read-only | mandatory | The number of cells received but is discarded by the ATM header validation checking. The error is usually due to a incorrectly configured VPI/VCI or other conf… |
| 1.3.6.1.4.1.930.2.2.2.1.1.1.6 | ColumnatmRxGoodCell | read-only | mandatory | The number of cells received that is valid. |
| 1.3.6.1.4.1.930.2.2.2.1.1.1.7 | ColumnatmTxDmaDropCell | read-only | mandatory | The number of outgoing cells dropped due to congestions. |
| 1.3.6.1.4.1.930.2.2.2.1.1.1.8 | ColumnatmTxGoodCell | read-only | mandatory | The number of cells transmitted. |
| 1.3.6.1.4.1.930.2.2.2.1.1.1.9 | ColumnatmSuniFifoOverrun | read-only | mandatory | The number of times that the SUNI FIFO overrun status bit has been read in the true state. |
| 1.3.6.1.4.1.930.2.2.2.2 | NodeatmElanMonitor | |||
| 1.3.6.1.4.1.930.2.2.2.2.1 | TableatmElanPvcStatisticTable | not-accessible | mandatory | Tmp ATM Elan PVC statistics |
| 1.3.6.1.4.1.930.2.2.2.2.1.1 | RowatmElanPvcStatisticEntry | not-accessible | mandatory | ATM Elan PVC statistics. The Elan ID is used as the index of the object. |
| 1.3.6.1.4.1.930.2.2.2.2.1.1.1 | ColumnatmElanId | read-only | mandatory | The Elan index. |
| 1.3.6.1.4.1.930.2.2.2.2.1.1.2 | ColumnatmElanPvcInUcastPkt | read-only | mandatory | The number of unicast packet that is received from this Elan PVC. |
| 1.3.6.1.4.1.930.2.2.2.2.1.1.3 | ColumnatmElanPvcInMcastPkt | read-only | mandatory | The number of multicast packet that is received from this Elan PVC. |
| 1.3.6.1.4.1.930.2.2.2.2.1.1.4 | ColumnatmElanPvcOutUcastPkt | read-only | mandatory | The number of unicast packet that is transmitted from this Elan PVC. |
| 1.3.6.1.4.1.930.2.2.2.2.1.1.5 | ColumnatmElanPvcOutMcastPkt | read-only | mandatory | The number of unicast packet that is transmitted from this Elan PVC. |
| 1.3.6.1.4.1.930.2.2.2.3 | NodeatmPvcStatusMonitor | |||
| 1.3.6.1.4.1.930.2.2.2.3.1 | TableatmPvcStatusTable | not-accessible | mandatory | Tmp ATM InterSwitch PVC status |
| 1.3.6.1.4.1.930.2.2.2.3.1.1 | RowatmPvcStatusEntry | not-accessible | mandatory | ATM PVC status. The PVC circuit ID is used as the index of the object. |
| 1.3.6.1.4.1.930.2.2.2.3.1.1.1 | ColumnatmPvcCktId | read-only | mandatory | This field is the index of the circuit. |
| 1.3.6.1.4.1.930.2.2.2.3.1.1.2 | ColumnatmPvcElanId | read-only | mandatory | This field is the index of the elan this circuit belongs to. |
| 1.3.6.1.4.1.930.2.2.2.3.1.1.3 | ColumnatmPvcRemoteSwitchInfoValid | read-only | mandatory | This field is based on the aging timer of a remote switch. If the local switch has not received any packets from the remote switch for a period of time, then i… |
| 1.3.6.1.4.1.930.2.2.2.3.1.1.4 | ColumnatmPvcRemoteSwitchMacAddress | read-only | mandatory | This field lists the remote switch's MAC address. If the atmInterSwitchPvcRemoteSwitchInfoValid object is 1, then this field contains the valid info. Otherwise… |
| 1.3.6.1.4.1.930.2.2.2.3.1.1.5 | ColumnatmPvcRemoteSwitchPvcStatus | read-only | mandatory | This field is set if the remote switch receives packets from this switch. If atmInterSwitchPvcRemoteSwitchInfoValid objeect is 1, then this field contains the … |
| 1.3.6.1.4.1.930.2.2.2.3.1.1.6 | ColumnatmPvcSTPState | read-only | mandatory | This field indicates the STP port state of the circuit. |
| 1.3.6.1.4.1.930.2.2.2.3.1.1.7 | ColumnatmPvcRemoteElanId | read-only | mandatory | This field indicates the elan ID of the circuit. |
| 1.3.6.1.4.1.930.2.2.2.3.1.1.8 | ColumnatmPvcRemoteMcpIpAddress | read-only | mandatory | This is the remote mcp ip address. |
| 1.3.6.1.4.1.930.2.2.2.4 | NodeatmSigMonitor | |||
| 1.3.6.1.4.1.930.2.2.2.4.1 | ScalarcnCurPtptConns | read-only | mandatory | This counter counts the number of current point-to-point calls of the switch. |
| 1.3.6.1.4.1.930.2.2.2.4.2 | ScalarcnCurPtmptConns | read-only | mandatory | This counter counts the number of current point-to-multipoint calls of the switch. |
| 1.3.6.1.4.1.930.2.2.2.4.3 | ScalarcnCurActiveConns | read-only | mandatory | This counter counts the number of current active calls of the switch. |
| 1.3.6.1.4.1.930.2.2.2.4.4 | TablecnCurPortConnsTable | not-accessible | mandatory | This table contains the point-to-point, point-to-multipoint and active calls per port for all the atm ports in the switch. |
| 1.3.6.1.4.1.930.2.2.2.4.4.1 | RowcnCurPortConnsEntry | not-accessible | mandatory | This entry contains the point-to-point, point-to-multipoint and active calls per port. |
| 1.3.6.1.4.1.930.2.2.2.4.4.1.1 | ColumncnCurPortConnsPtptConns | read-only | mandatory | This entry counts the number of current point-to-point calls per port. |
| 1.3.6.1.4.1.930.2.2.2.4.4.1.2 | ColumncnCurPortConnsPtmptConns | read-only | mandatory | This entry counts the number of current point-to-multipoint calls per port. |
| 1.3.6.1.4.1.930.2.2.2.4.4.1.3 | ColumncnCurPortConnsActiveConns | read-only | mandatory | This entry counts the number of current active calls per port. |
| 1.3.6.1.4.1.930.2.2.2.5 | NodeatmCardMonitor | |||
| 1.3.6.1.4.1.930.2.2.2.5.1 | TableatmCardOperTable | not-accessible | mandatory | ATM Card Operational values |
| 1.3.6.1.4.1.930.2.2.2.5.1.1 | RowatmCardOperEntry | not-accessible | mandatory | ATM Card Operational values. Each entry is indexed by card number |
| 1.3.6.1.4.1.930.2.2.2.5.1.1.1 | ColumnatmCardOperCardId | read-only | mandatory | This field is the card index |
| 1.3.6.1.4.1.930.2.2.2.5.1.1.2 | ColumnatmCardOperExtClockSource | read-only | mandatory | This field indicates the operational external clock source. The following value is read-only: 0 = Local Oscillator, 1..N = ATM port id for external clock sourc… |
| 1.3.6.1.4.1.930.2.2.2.6 | NodeatmStatusEnqMonitor | |||
| 1.3.6.1.4.1.930.2.2.2.6.1 | ScalarcnStsEnqPTPCalls | read-only | mandatory | The number of current point-to-point calls in the status enquiry queue of the switch. |
| 1.3.6.1.4.1.930.2.2.2.6.2 | ScalarcnStsEnqActiveParties | read-only | mandatory | The number of current active parties in the status enquiry queue of the switch. (This includes point- to-multi-point calls). |
| 1.3.6.1.4.1.930.2.2.2.6.3 | ScalarcnStsEnqSent | read-only | mandatory | The total number of status enquiry requests sent. |
| 1.3.6.1.4.1.930.2.2.2.6.4 | ScalarcnStsEnqCfmsRecvd | read-only | mandatory | The number of current status messages (in response to status enquiry) received. |
| 1.3.6.1.4.1.930.2.2.2.6.5 | ScalarcnStsEnqRetried | read-only | mandatory | The total number of status enquiry commands retried. |
| 1.3.6.1.4.1.930.2.2.2.6.6 | ScalarcnStsEnqTimeOuts | read-only | mandatory | The total number of status enquiry commands timed out i.e The number of calls for which status (in response to status enquiry) was not received. |
| 1.3.6.1.4.1.930.2.2.2.6.7 | ScalarcnStsEnqQueueSize | read-only | mandatory | The size of the status enquiry queue. |
| 1.3.6.1.4.1.930.2.2.2.6.8 | ScalarcnStsEnqCallsCleared | read-only | mandatory | The number of calls cleared by status enquiry. |