CENTILLION-BRIDGE-MIB
43 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.930.3.17 | Nodecndot1dBridge | |||
| 1.3.6.1.4.1.930.3.17.1 | Nodecndot1dBase | |||
| 1.3.6.1.4.1.930.3.17.1.1 | Scalarcndot1dBaseBridgeAddress | read-only | mandatory | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.930.3.17.1.2 | Scalarcndot1dBaseNumPorts | read-only | mandatory | The number of ports controlled by this bridging entity. |
| 1.3.6.1.4.1.930.3.17.1.3 | Scalarcndot1dBaseType | read-only | mandatory | Indicates what type of bridging is being performed If a bridge is actually performing a certain type of bridging this will be indicated by entries in the port … |
| 1.3.6.1.4.1.930.3.17.1.4 | Tablecndot1dBasePortTable | not-accessible | mandatory | A table that contains generic information about every port that is associated with this bridge. Transparent, source-route, and srt ports are included. |
| 1.3.6.1.4.1.930.3.17.1.4.1 | Rowcndot1dBasePortEntry | not-accessible | mandatory | A list of information for each port of the bridge. |
| 1.3.6.1.4.1.930.3.17.1.4.1.1 | Columncndot1dBasePort | read-only | mandatory | The port number of the port for which this entry contains bridge management information. |
| 1.3.6.1.4.1.930.3.17.1.4.1.2 | Columncndot1dBasePortIfIndex | read-only | mandatory | The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port. |
| 1.3.6.1.4.1.930.3.17.1.4.1.3 | Columncndot1dBasePortCircuit | read-only | mandatory | For a port which (potentially) has the same value of cndot1dBasePortVirtualRing as another port on the same bridge, this object contains the name of an object … |
| 1.3.6.1.4.1.930.3.17.2 | Nodecndot1dStp | |||
| 1.3.6.1.4.1.930.3.17.2.1 | Scalarcndot1dStpProtocolSpecification | read-only | mandatory | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE … |
| 1.3.6.1.4.1.930.3.17.2.2 | Scalarcndot1dStpPriority | read-write | mandatory | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID ar… |
| 1.3.6.1.4.1.930.3.17.2.3 | Scalarcndot1dStpTimeSinceTopologyChange | read-only | mandatory | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| 1.3.6.1.4.1.930.3.17.2.4 | Scalarcndot1dStpTopChanges | read-only | mandatory | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| 1.3.6.1.4.1.930.3.17.2.5 | Scalarcndot1dStpDesignatedRoot | read-only | mandatory | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide… |
| 1.3.6.1.4.1.930.3.17.2.6 | Scalarcndot1dStpRootCost | read-only | mandatory | The cost of the path to the root as seen from this bridge. |
| 1.3.6.1.4.1.930.3.17.2.7 | Scalarcndot1dStpRootPort | read-only | mandatory | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| 1.3.6.1.4.1.930.3.17.2.8 | Scalarcndot1dStpMaxAge | read-only | mandatory | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.930.3.17.2.9 | Scalarcndot1dStpHelloTime | read-only | mandatory | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become … |
| 1.3.6.1.4.1.930.3.17.2.10 | Scalarcndot1dStpHoldTime | read-only | mandatory | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.930.3.17.2.11 | Scalarcndot1dStpForwardDelay | read-only | mandatory | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.930.3.17.2.12 | Scalarcndot1dStpBridgeMaxAge | read-write | mandatory | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related … |
| 1.3.6.1.4.1.930.3.17.2.13 | Scalarcndot1dStpBridgeHelloTime | read-write | mandatory | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second.… |
| 1.3.6.1.4.1.930.3.17.2.14 | Scalarcndot1dStpBridgeForwardDelay | read-write | mandatory | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is re… |
| 1.3.6.1.4.1.930.3.17.2.15 | Tablecndot1dStpPortTable | not-accessible | mandatory | A table that contains port-specific information for the Spanning Tree Protocol. |
| 1.3.6.1.4.1.930.3.17.2.15.1 | Rowcndot1dStpPortEntry | not-accessible | mandatory | A list of information maintained by every port about the Spanning Tree Protocol state for that port. |
| 1.3.6.1.4.1.930.3.17.2.15.1.1 | Columncndot1dStpPort | read-only | mandatory | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| 1.3.6.1.4.1.930.3.17.2.15.1.2 | Columncndot1dStpPortPriority | read-write | mandatory | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is … |
| 1.3.6.1.4.1.930.3.17.2.15.1.3 | Columncndot1dStpPortState | read-only | mandatory | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the … |
| 1.3.6.1.4.1.930.3.17.2.15.1.4 | Columncndot1dStpPortEnable | read-write | mandatory | The enabled/disabled status of the port. |
| 1.3.6.1.4.1.930.3.17.2.15.1.5 | Columncndot1dStpPortPathCost | read-write | mandatory | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value o… |
| 1.3.6.1.4.1.930.3.17.2.15.1.6 | Columncndot1dStpPortDesignatedRoot | read-only | mandatory | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po… |
| 1.3.6.1.4.1.930.3.17.2.15.1.7 | Columncndot1dStpPortDesignatedCost | read-only | mandatory | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| 1.3.6.1.4.1.930.3.17.2.15.1.8 | Columncndot1dStpPortDesignatedBridge | read-only | mandatory | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.930.3.17.2.15.1.9 | Columncndot1dStpPortDesignatedPort | read-only | mandatory | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.930.3.17.2.15.1.10 | Columncndot1dStpPortForwardTransitions | read-only | mandatory | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| 1.3.6.1.4.1.930.3.17.3 | Nodecndot1dSr | |||
| 1.3.6.1.4.1.930.3.17.4 | Nodecndot1dTp | |||
| 1.3.6.1.4.1.930.3.17.4.5 | Scalarcndot1dTpSrFrameForward | read-write | mandatory | Indicates whether the system will forward source routed frames if running in transparent bridging mode. If this value is disabled(1), the system will drop all … |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BridgeId | OCTET STRING (SIZE (8)) | ||
| MacAddress | OCTET STRING (SIZE (6)) | ||
| Timeout | INTEGER |