CENTILLION-SYSTEM-EVENT-LOG-MIB
21 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.930.2.1.5.1 | ScalarsysEvtLogDuration | read-write | mandatory | This value indicates the remaining duration of Event Logging. The unit is in seconds. The maximum value is equal to 1000 days (86,400,000 seconds). A set value… |
| 1.3.6.1.4.1.930.2.1.5.2 | ScalarsysEvtLogPreFilterEntityMap | read-write | mandatory | The bit array that contains the bit map of all possible entities for event logging pre-filter control. There are total of 64 entities. Each entity represented … |
| 1.3.6.1.4.1.930.2.1.5.3 | ScalarsysEvtLogPreFilterSeverity | read-write | mandatory | This value indicates the severity level for event log pre-filtering control. An event message with less severity level will not be logged into event message bu… |
| 1.3.6.1.4.1.930.2.1.5.4 | TablesysEvtLogSlotPreFilterTable | not-accessible | mandatory | A slot table for controlling pre-filter setting for all slots. This table is managed by Event Log application only. Table entries cannot be created or deleted. |
| 1.3.6.1.4.1.930.2.1.5.4.1 | RowsysEvtLogSlotPreFilterEntry | not-accessible | mandatory | An entry of the slot pre-filter table. |
| 1.3.6.1.4.1.930.2.1.5.4.1.1 | ColumnsysEvtLogSlotPreFilterCardId | read-only | mandatory | The slot index varies by system. It is chassis dependent. For C100, valid number is 1-6. For BH left, valid number is 2-7. For BH right, valid number is 8-13. … |
| 1.3.6.1.4.1.930.2.1.5.4.1.2 | ColumnsysEvtLogSlotPreFilterControl | read-write | mandatory | This value indicates the pre-filter setting for the specified slot. |
| 1.3.6.1.4.1.930.2.1.5.5 | TablesysEvtLogPortPreFilterTable | not-accessible | mandatory | A port table for controlling pre-filter setting for all ports. This table is managed by Event Log application only. Table entries cannot be created or deleted. |
| 1.3.6.1.4.1.930.2.1.5.5.1 | RowsysEvtLogPortPreFilterEntry | not-accessible | mandatory | An entry for port table for controlling pre-filter setting for all ports. |
| 1.3.6.1.4.1.930.2.1.5.5.1.1 | ColumnsysEvtLogPortPreFilterCardId | read-only | mandatory | The slot index varies by system. It is chassis dependent. For C100, valid number is 1-6. For BH left, valid number is 2-7. For BH right, valid number is 8-13. … |
| 1.3.6.1.4.1.930.2.1.5.5.1.2 | ColumnsysEvtLogPortPreFilterPortId | read-only | mandatory | The port index of the specified slot. |
| 1.3.6.1.4.1.930.2.1.5.5.1.3 | ColumnsysEvtLogPortPreFilterControl | read-write | mandatory | This value indicates the pre-filter setting for the specified port. Note: A module must be properly configured before any port of the module can be set with a … |
| 1.3.6.1.4.1.930.2.1.5.6 | ScalarsysEvtLogDestMap | read-write | mandatory | This value is a bit map of each destination that Event Log can forward messages to, where bit 0 for console CLI bit 1 for Syslogd bit 2 for Tftpsave The value … |
| 1.3.6.1.4.1.930.2.1.5.7 | NodesysEvtLogSysLogCfg | |||
| 1.3.6.1.4.1.930.2.1.5.7.1 | ScalarsysEvtLogSysLogHostIp | read-write | mandatory | The IP address of Unix system that runs Syslogd. The event messages are redirect to Syslogd only when this IP address is valid and the bit value of Syslogd of … |
| 1.3.6.1.4.1.930.2.1.5.7.2 | ScalarsysEvtLogSysLogSeverity | read-write | mandatory | This value indicates the severity level for Event Log to forward events to SysLogd in Unix system. An event message with less severity level will not be forwar… |
| 1.3.6.1.4.1.930.2.1.5.7.3 | ScalarsysEvtLogSysLogFacility | read-write | mandatory | This value indicates the facility number for the event messages to be logged by syslogd. The supported values are from local0 to local7 only (refer to syslogd … |
| 1.3.6.1.4.1.930.2.1.5.8 | NodesysEvtLogTftpsaveCfg | |||
| 1.3.6.1.4.1.930.2.1.5.8.1 | ScalarsysEvtLogTftpsaveHostIp | read-write | mandatory | The IP address of TFTP server system. The event messages file is transfered from event log buffer to server system only when this IP is valid and the event mes… |
| 1.3.6.1.4.1.930.2.1.5.8.2 | ScalarsysEvtLogTftpsaveFileName | read-write | mandatory | This octet string indicates the file name for the Tftpsave option of event log function. The filename will be appended with an extension nnn, where nnn ranges … |
| 1.3.6.1.4.1.930.2.1.5.8.3 | ScalarsysEvtLogTftpsaveMaxMsgCount | read-write | mandatory | This value indicates how many messages in the event log buffer will trigger the TFTP file transfer for logged messages to TFTP host. the default value is maxim… |