CENTRECOM-QOS-MIB
15 objects
Atkk Quality-of-Service objects
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207.8.12.2.5 | IdentityatiQos | Atkk Quality-of-Service objects | ||
| 1.3.6.1.4.1.207.8.12.2.5.1 | NodeatiQosCommon | |||
| 1.3.6.1.4.1.207.8.12.2.5.1.4 | ScalaratiQosMode | read-write | mandatory | Indicates which QoS mode the device should use. ingress(1) applies priority-based QoS based on the incoming packet's destination IP or MAC address, 802.1p prio… |
| 1.3.6.1.4.1.207.8.12.2.5.1.5 | ScalaratiQosUnconfigure | read-write | mandatory | Setting this to true will reset all QoS settings in the device to factory defaults. Reads from this value return an undefined value. |
| 1.3.6.1.4.1.207.8.12.2.5.1.6 | TableatiQosProfileTable | not-accessible | mandatory | This table lists QoS profiles. |
| 1.3.6.1.4.1.207.8.12.2.5.1.6.1 | RowatiQosProfileEntry | not-accessible | mandatory | An individual QoS profile Entry. |
| 1.3.6.1.4.1.207.8.12.2.5.1.6.1.1 | ColumnatiQosProfileIndex | read-write | mandatory | An index that uniquely identifies an entry in the qos table. |
| 1.3.6.1.4.1.207.8.12.2.5.1.6.1.2 | ColumnatiQosProfileName | read-write | mandatory | A unique qos profile name. |
| 1.3.6.1.4.1.207.8.12.2.5.1.6.1.3 | ColumnatiQosProfileMinBw | read-write | mandatory | The minumum percentage of bandwidth that this queue requires. The Switch is required to provide the minumum amount of bandwidth to the queue. The lowest possib… |
| 1.3.6.1.4.1.207.8.12.2.5.1.6.1.4 | ColumnatiQosProfileMaxBw | read-write | mandatory | The maximum percentage of bandwidth that this queue is permitted to use |
| 1.3.6.1.4.1.207.8.12.2.5.1.6.1.5 | ColumnatiQosProfilePriority | read-write | mandatory | The level of priority in which this queue will be serviced by the Switch. |
| 1.3.6.1.4.1.207.8.12.2.5.1.6.1.6 | ColumnatiQosProfileRowStatus | read-write | mandatory | The status of the atiQosProfile entry. This OBJECT can be set to: active(1) createAndGo(4) createAndWait(5) destroy(6) The following values may be read: active… |
| 1.3.6.1.4.1.207.8.12.2.5.1.7 | TableatiQosByVlanMappingTable | not-accessible | mandatory | Table to associate a Vlan with the QoS profile that the Vlan is using. Every Vlan is assigned a Qos Profile and hence there is an entry in this table correspon… |
| 1.3.6.1.4.1.207.8.12.2.5.1.7.1 | RowatiQosByVlanMappingEntry | not-accessible | mandatory | The QoS associated with a particular Vlan. |
| 1.3.6.1.4.1.207.8.12.2.5.1.7.1.1 | ColumnatiQosByVlanMappingQosProfileIndex | read-write | mandatory | Value of atiQosProfileIndex that uniquely identifies a QoS Profile entry in atiQosProfileTable. This indicates the QoS to be given to traffic for this Vlan in … |