CENTRECOM-SYSTEM-MIB
21 objects
Atkk Switch System objects
Imported Objects
| CENTRECOM-MIB | extSwitchMIB |
| RFC-1212 | OBJECT-TYPE |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | MODULE-IDENTITY |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207.8.12.2.3 | IdentityatiSwitchSystem | Atkk Switch System objects | ||
| 1.3.6.1.4.1.207.8.12.2.3.3 | ScalaratiSaveConfiguration | write-only | mandatory | When this object is set, the device will copy the contents of the configuration database to a buffer and save it to the persistant store specified by the value… |
| 1.3.6.1.4.1.207.8.12.2.3.4 | ScalaratiSaveStatus | read-only | mandatory | This object will return the status of a save operation invoked by setting the atiSaveConfiguration object. A network management application can read this objec… |
| 1.3.6.1.4.1.207.8.12.2.3.5 | ScalaratiCurrentConfigInUse | read-only | mandatory | Shows which NVRAM configuration store was used at last boot |
| 1.3.6.1.4.1.207.8.12.2.3.6 | ScalaratiConfigToUseOnReboot | read-write | mandatory | Controls which NVRAM configuration store will be used on next reboot. |
| 1.3.6.1.4.1.207.8.12.2.3.7 | ScalaratiOverTemperatureAlarm | read-only | mandatory | Alarm status of overtemperature sensor in device enclosure. |
| 1.3.6.1.4.1.207.8.12.2.3.8 | ScalaratiCurrentTemperature | read-only | mandatory | Current temperature in degrees celcius measured inside device enclosure. |
| 1.3.6.1.4.1.207.8.12.2.3.9 | TableatiFanStatusTable | not-accessible | mandatory | Table of operational status of all internal cooling fans. |
| 1.3.6.1.4.1.207.8.12.2.3.9.1 | RowatiFanStatusEntry | not-accessible | mandatory | Entry in table of all internal cooling fans. |
| 1.3.6.1.4.1.207.8.12.2.3.9.1.1 | ColumnatiFanNumber | read-only | mandatory | Identifier of cooling fan, numbered from the front and/or left side of device. |
| 1.3.6.1.4.1.207.8.12.2.3.9.1.2 | ColumnatiFanOperational | read-only | mandatory | Operational status of a cooling fan. |
| 1.3.6.1.4.1.207.8.12.2.3.10 | ScalaratiPrimaryPowerOperational | read-only | mandatory | Operational status of internal power supply of a device. |
| 1.3.6.1.4.1.207.8.12.2.3.11 | ScalaratiRedundantPowerStatus | read-only | mandatory | Operational status of an external redundant power supply to a device. |
| 1.3.6.1.4.1.207.8.12.2.3.12 | ScalaratiRedundantPowerAlarm | read-only | mandatory | Alarm state of an external redundant power supply to a device. Alarm state indicates either fan failure or overtemperature condition. |
| 1.3.6.1.4.1.207.8.12.2.3.13 | ScalaratiPrimarySoftwareRev | read-only | mandatory | The software revision of the primary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. This … |
| 1.3.6.1.4.1.207.8.12.2.3.14 | ScalaratiSecondarySoftwareRev | read-only | mandatory | The software revision of the secondary image stored in this device. This string will have a zero length if the revision is unknown, invalid or not present. Thi… |
| 1.3.6.1.4.1.207.8.12.2.3.15 | ScalaratiImageToUseOnReboot | read-write | mandatory | Controls which image will be used on next reboot. |
| 1.3.6.1.4.1.207.8.12.2.3.16 | ScalaratiSystemID | read-only | mandatory | This represents the System ID of the Switch. |
| 1.3.6.1.4.1.207.8.12.2.3.17 | ScalaratiSystemBoardID | read-only | mandatory | This represents the Board ID of the Switch. |
| 1.3.6.1.4.1.207.8.12.2.3.18 | ScalaratiSystemLeftBoardID | read-only | mandatory | This represents the Left Board ID of the Summit Switch. |
| 1.3.6.1.4.1.207.8.12.2.3.19 | ScalaratiSystemRightBoardID | read-only | mandatory | This represents the Right Board ID of the Summit Switch. |