CHANNEL-CHANGE-MIB
54 objects
This module defines a MIB for managing the Channel Change Control Function within an OLT/ONU.
Imported Objects
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1 | Nodefsan | |||
| 1.3.6.1.4.1.1.1 | NodefsVdsl | |||
| 1.3.6.1.4.1.1.1.1 | IdentitychannelChangeMib | This module defines a MIB for managing the Channel Change Control Function within an OLT/ONU. | ||
| 1.3.6.1.4.1.1.1.1.1 | NodechannelChangeMibObjects | |||
| 1.3.6.1.4.1.1.1.1.1.1 | TablechannelTable | not-accessible | current | This defines the channels and associated ATM replication points (ATM VCCs) within the OLT/ONU. Note that the channel table supports both IP multicast addresses… |
| 1.3.6.1.4.1.1.1.1.1.1.1 | RowchannelEntry | not-accessible | current | An entry in the channelTable represents a single channel. |
| 1.3.6.1.4.1.1.1.1.1.1.1.1 | ColumnchannelId | not-accessible | current | The channelId shall be a Class D IP address allocated to the multicast channel regardless of whether the channel is delivering video over UDP/IP multicast or A… |
| 1.3.6.1.4.1.1.1.1.1.1.1.2 | ColumnentitlementIndex | read-create | current | The value of this object is the key for performing conditional access. The value zero (0) is reserved and is allocated to a channel which is free and does not … |
| 1.3.6.1.4.1.1.1.1.1.1.1.3 | ColumnnetworkPortId | read-create | current | The value of this object shall be equal to the ifIndex of the network interface in the OLT/ONU carrying the multicast channels. This is so that this object alo… |
| 1.3.6.1.4.1.1.1.1.1.1.1.4 | Columnvpi | read-create | current | The value of this object is equal to the VPI allocated to the replication point (ATM VCC) in the OLT/ONU for this channel. |
| 1.3.6.1.4.1.1.1.1.1.1.1.5 | Columnvci | read-create | current | The value of this object is equal to the VCI allocated to the replication point (ATM VCC) in the OLT/ONU for this channel. |
| 1.3.6.1.4.1.1.1.1.1.1.1.7 | ColumnchannelAdminStatus | read-create | current | This object is used to control the management state of this channel. When this object is set to locked(1) all existing customers connected to this channel shal… |
| 1.3.6.1.4.1.1.1.1.1.1.1.8 | ColumnchannelRowStatus | read-create | current | This object is used to manage row creation and deletion. When the channelAdminStatus is locked(1) the value of this object should be notInService(2). When the … |
| 1.3.6.1.4.1.1.1.1.1.2 | TablecustomerTable | not-accessible | current | This defines the customers for broadcast entertainment services. |
| 1.3.6.1.4.1.1.1.1.1.2.1 | RowcustomerEntry | not-accessible | current | An entry in the customerTable represents a single customer. |
| 1.3.6.1.4.1.1.1.1.1.2.1.1 | ColumnonuId | not-accessible | current | Describes uniquely the ONU to which the customer is attached. The value of this object shall be the ifIndex of the interface in the OLT that connects to the as… |
| 1.3.6.1.4.1.1.1.1.1.2.1.2 | ColumncustomerPortId | not-accessible | current | Describes uniquely the port within the ONU/OLT to which the customer is attached. The value of this object shall be the ifIndex of the port to which the custom… |
| 1.3.6.1.4.1.1.1.1.1.2.1.3 | ColumnmaxMulticastTraffic | read-create | current | This object defines the maximum amount of bandwidth in kilobit/s allocated to broadcast entertainment services. The value shall be an integer multiple of 10kbp… |
| 1.3.6.1.4.1.1.1.1.1.2.1.4 | ColumnmaxMulticastStreams | read-create | current | This object defines the maximum number of multicast streams that can be active simultaneously across a DSL UNI. A value of zero (0) is used to indicate that th… |
| 1.3.6.1.4.1.1.1.1.1.2.1.5 | ColumnuntimedEntitlements1 | read-create | current | This object is used as a bitmap to store untimed entitlements to premium channels. Note that the first bit of the first octet is reserved. Bits 1 to 2047 corre… |
| 1.3.6.1.4.1.1.1.1.1.2.1.6 | ColumnuntimedEntitlements2 | read-create | current | In order to support a greater number of channels this object is used in the same way as untimedEntitlements1 but bits 0 to 2048 correspond to entitlements for … |
| 1.3.6.1.4.1.1.1.1.1.2.1.7 | ColumngrantEntitlement | read-create | current | When granting entitlements to a single channel for many customers SNMP Setting the untimedEntitlement1/2 object leads to lots of management traffic due to the … |
| 1.3.6.1.4.1.1.1.1.1.2.1.8 | ColumnrevokeEntitlement | read-create | current | When revoking entitlements to a single channel for many customers SNMP Setting the untimedEntitlement1/2 object leads to lots of management traffic due to the … |
| 1.3.6.1.4.1.1.1.1.1.2.1.9 | ColumncustomerAdminStatus | read-create | current | This object is used to control the management state of this customer. When this object is set to locked(1) all existing channels being delivered to this custom… |
| 1.3.6.1.4.1.1.1.1.1.2.1.10 | ColumncustomerRowStatus | read-create | current | This object is used to manage row creation and deletion. When the channelAdminStatus is locked(1) the value of this object should be notInService(2). When the … |
| 1.3.6.1.4.1.1.1.1.1.3 | TabletimedEntitlementTable | not-accessible | current | This table is used to store entitlements to channels that have a relatively short duration, such as PPV channels. |
| 1.3.6.1.4.1.1.1.1.1.3.1 | RowtimedEntitlementEntry | not-accessible | current | An entry corresponds to timed entitlement for a single channel identified by the channelId. The same entry may be applicable to one or more customers as define… |
| 1.3.6.1.4.1.1.1.1.1.3.1.1 | ColumntimedEntitlementId | read-create | current | Describes uniquely a timed entitlement. |
| 1.3.6.1.4.1.1.1.1.1.3.1.2 | ColumntimedEntitlementChannelId | read-create | current | This has the value of the channelId of the channelEntry for which this timedEntitlementEntry is for. |
| 1.3.6.1.4.1.1.1.1.1.3.1.3 | ColumnstartTime | read-create | current | This is the time, expressed in UTC, from which time the channel is allowed to be viewed. When this time is less than or equal to the current time, the bit in t… |
| 1.3.6.1.4.1.1.1.1.1.3.1.4 | ColumnstopTime | read-create | current | This is the time, expressed in UTC, after which time the channel is not allowed to be viewed. When this time is less than the current time, the bit in the unti… |
| 1.3.6.1.4.1.1.1.1.1.3.1.5 | ColumnentitlementRowStatus | read-create | current | This object is used to manage row creation and deletion. |
| 1.3.6.1.4.1.1.1.1.1.4 | TablecustomerTimedEntitlementTable | not-accessible | current | This table defines the timed entitlements used by a customer as defined by the associated timedEntitlementEntry. |
| 1.3.6.1.4.1.1.1.1.1.4.1 | RowcustomerTimedEntitlementEntry | not-accessible | current | An entry corresponds to a timed entitlement for a customer. |
| 1.3.6.1.4.1.1.1.1.1.4.1.1 | ColumncustOnuId | not-accessible | current | Describes uniquely the ONU to which the customer is attached. The value of this object shall be the ifIndex of the interface in the OLT that connects to the as… |
| 1.3.6.1.4.1.1.1.1.1.4.1.2 | ColumncustPortId | not-accessible | current | Describes uniquely the port within the ONU/OLT to which the customer is attached. The value of this object shall be the ifIndex of the port to which the custom… |
| 1.3.6.1.4.1.1.1.1.1.4.1.3 | ColumncustTimedEntitlementId | read-create | current | This has the value of the timedEntitlementId for the timedEntitlementEntry that defined the timed entitlement to a channel for this customer. |
| 1.3.6.1.4.1.1.1.1.1.4.1.4 | ColumncustTimedEntitlementRowStatus | read-create | current | This object is used to manage row creation and deletion. |
| 1.3.6.1.4.1.1.1.1.1.5 | ScalarrejectedOnuId | read-write | current | Identifies the ONU from which the rejected channel change request originated. |
| 1.3.6.1.4.1.1.1.1.1.6 | ScalarrejectedCustomerPortId | read-write | current | Identifies the DSL portfrom which the rejected channel change request originated. |
| 1.3.6.1.4.1.1.1.1.1.7 | ScalarcaFailedNotificationStatus | read-write | current | This object is used to enable and disable the sending of the channelChangeCAFailed trap. |
| 1.3.6.1.4.1.1.1.1.2 | NodechannelChangeMibNotifications | |||
| 1.3.6.1.4.1.1.1.1.2.0 | NodechannelChangeMibNotificationPrefix | |||
| 1.3.6.1.4.1.1.1.1.2.0.1 | NotificationchannelChangeCAFailed | current | This trap is generated when conditional access fails for a requested channel change. The trap identifies the customer that issued the request. | |
| 1.3.6.1.4.1.1.1.1.3 | NodechannelChangeMibConformance | |||
| 1.3.6.1.4.1.1.1.1.3.1 | NodechannelChangeMibCompliances | |||
| 1.3.6.1.4.1.1.1.1.3.1.1 | CompliancechannelChangeMibCompliance | current | The compliance statement for SNMP entities that support the channel change function as specified in FS-VDSL SA specification. For a system to conform to this M… | |
| 1.3.6.1.4.1.1.1.1.3.2 | NodechannelChangeMibGroups | |||
| 1.3.6.1.4.1.1.1.1.3.2.1 | GroupchannelChangeBasicGroup | current | A collection of objects required as a minimum to manage the Channel Change Control function. | |
| 1.3.6.1.4.1.1.1.1.3.2.2 | GroupchannelChangeCACGroup | current | A collection of objects required to support CAC. | |
| 1.3.6.1.4.1.1.1.1.3.2.3 | GroupchannelChangeBasicCAGroup | current | A collection of objects required to support CA with only untimed entitlements. This group is sufficient to support conditional access for up to 2047 channels. | |
| 1.3.6.1.4.1.1.1.1.3.2.4 | GroupchannelChangeCA4095ChannelsGroup | current | This group is required in addition to the channelChangeBasicCAGroup to support CA for up to 4095 channels. | |
| 1.3.6.1.4.1.1.1.1.3.2.5 | GroupchannelChangeCATimedEntitlementsGroup | current | This group is required in addition to the channelChangeBasicCAGroup, and if applicable the channelChangeCA4095ChannelsGroup, to support timed entitlements. | |
| 1.3.6.1.4.1.1.1.1.3.2.6 | GroupchannelChangeCANotificationsGroup | current | This group contains the notification used to inform management that a conditional access request failed. This group is optional if CA is implemented by the Cha… |