MIB Viewer

CHIPAGENT-MIB

110 objects
No module-level DESCRIPTION found.
Imported Objects
RFC-1212OBJECT-TYPE
RFC1155-SMICounter DisplayString enterprises Gauge IpAddress NetworkAddress TimeTicks
OIDNameAccessStatusDescription
1.3.6.1.4.1.49Nodechipcom
1.3.6.1.4.1.49.2Nodechipmib02
1.3.6.1.4.1.49.2.1NodechipGen
1.3.6.1.4.1.49.2.1.1ScalarchipGenProductread-onlymandatoryThe product type represented by this agent.
1.3.6.1.4.1.49.2.1.2ScalarchipGenServiceDateread-onlymandatoryThe date that the product was last serviced in the format yymmdd. If this date is unknown, the value of this object is '000000'.
1.3.6.1.4.1.49.2.1.3ScalarchipGenNetmanread-onlymandatoryThe IP (source) Address of the last authenticated SNMP PDU received by this entity before this request. An IP Address of 00.00.00.00 represents the default val…
1.3.6.1.4.1.49.2.1.4ScalarchipGenDiagnosticsread-onlymandatoryThe result of this product's diagnostic test(s). If any test fails, this will have the failed(2) value. Note, many products do not operate after a diagnostic f…
1.3.6.1.4.1.49.2.1.5ScalarchipGenSerialread-onlymandatoryThe serial number of this product.
1.3.6.1.4.1.49.2.1.6ScalarchipGenIDread-writemandatoryA unique ID used for grouping disparate agents together. For example, a concentrator may contain multiple agents. This ID is could be assigned by the managemen…
1.3.6.1.4.1.49.2.1.7ScalarchipGenVersread-onlymandatoryThe version identifier(s) for this agent.
1.3.6.1.4.1.49.2.1.8ScalarchipGenAuthFailureAddrread-onlymandatoryThe source IP Address of the last SNMP request that caused an authentication failure trap to be generated. This object is also included in the SNMP authenticat…
1.3.6.1.4.1.49.2.1.9ScalarchipGenTimeLastChangedread-onlymandatoryA snapshot of sysUpTime when the last trap was generated. This attribute can be used to save polling by a management station. If there have been no traps gener…
1.3.6.1.4.1.49.2.2NodechipEcho
1.3.6.1.4.1.49.2.2.1ScalarchipEchoStartread-writemandatorySetting chipEchoStart to startEcho(2) causes the device to begin an ICMP echo sequence using the parameters indicated by the rest of the chipEcho group.
1.3.6.1.4.1.49.2.2.2ScalarchipEchoAddrread-writemandatoryThe IP Address to which the device will ping. The default value is the loopback address 127.0.0.1 .
1.3.6.1.4.1.49.2.2.3ScalarchipEchoPatternread-writemandatoryThe actual pattern to be contained in the ICMP echo packet.
1.3.6.1.4.1.49.2.2.4ScalarchipEchoNumberread-writemandatoryThe number of ICMP echo packets (pings) to send.
1.3.6.1.4.1.49.2.2.5ScalarchipEchoSizeread-writemandatoryThe size of the ICMP echo packet (ping) to send when chipEchoStart is set. The valid range is between 64 and 1500 octets.
1.3.6.1.4.1.49.2.2.6ScalarchipEchoResponseCountsread-onlymandatoryThe count of ICMP echo response packets received since the last PING was initiated.
1.3.6.1.4.1.49.2.3NodechipProducts
1.3.6.1.4.1.49.2.3.1Nodeonline
1.3.6.1.4.1.49.2.3.1.1NodeolAgents
1.3.6.1.4.1.49.2.3.1.2NodeolConc
1.3.6.1.4.1.49.2.3.1.3NodeolEnv
1.3.6.1.4.1.49.2.3.1.4NodeolModules
1.3.6.1.4.1.49.2.3.1.4.4NodeolSpecMods
1.3.6.1.4.1.49.2.3.1.4.4.3Nodeol50nnMCTL
1.3.6.1.4.1.49.2.3.1.4.4.4Nodeol51nnMMGT
1.3.6.1.4.1.49.2.3.1.4.4.5Nodeol51nnMFIB
1.3.6.1.4.1.49.2.3.1.4.4.6Nodeol51nnMUTP
1.3.6.1.4.1.49.2.3.1.4.4.7Nodeol51nnMTP
1.3.6.1.4.1.49.2.3.1.4.4.8Nodeol51nnMBNC
1.3.6.1.4.1.49.2.3.1.4.4.9Nodeol51nnBEE
1.3.6.1.4.1.49.2.3.1.4.4.10Nodeol51nnRES
1.3.6.1.4.1.49.2.3.1.4.4.11Nodeol51nnREE
1.3.6.1.4.1.49.2.3.1.4.4.12Nodeol51nnMAUIF
1.3.6.1.4.1.49.2.3.1.4.4.13Nodeol51nnMAUIM
1.3.6.1.4.1.49.2.3.1.4.4.14Nodeol5208MTP
1.3.6.1.4.1.49.2.3.1.4.4.15Nodeol51nnMFP
1.3.6.1.4.1.49.2.3.1.4.4.16Nodeol51nnMFBP
1.3.6.1.4.1.49.2.3.1.4.4.17Nodeol51nnMTPL
1.3.6.1.4.1.49.2.3.1.4.4.18Nodeol51nnMTPPL
1.3.6.1.4.1.49.2.3.1.4.4.19Nodeol52nnMTP
1.3.6.1.4.1.49.2.3.1.4.4.20Nodeol52nnMFR
1.3.6.1.4.1.49.2.3.1.4.4.21Nodeol51nnMTS
1.3.6.1.4.1.49.2.3.1.4.4.22Nodeol51nnMFL
1.3.6.1.4.1.49.2.3.1.4.4.23Nodeol50nnMRCTL
1.3.6.1.4.1.49.2.3.1.4.4.24Nodeol51nnMFB
1.3.6.1.4.1.49.2.3.1.4.4.25Nodeol53nnMMGT
1.3.6.1.4.1.49.2.3.1.4.4.26Nodeol53nnMFBMIC
1.3.6.1.4.1.49.2.3.1.4.4.27Nodeol53nnMFIBST
1.3.6.1.4.1.49.2.3.1.4.4.28Nodeol53nnMSTP
1.3.6.1.4.1.49.2.3.1.4.4.29Nodeol51nnMTPCL
1.3.6.1.4.1.49.2.3.1.4.4.30Nodeol52nnBTT
1.3.6.1.4.1.49.2.3.1.4.4.31Nodeol51nnIx
1.3.6.1.4.1.49.2.3.1.4.4.32Nodeol52nnMMGT
1.3.6.1.4.1.49.2.3.1.4.4.33Nodeol50nnMHCTL
1.3.6.1.4.1.49.2.3.1.5NodeolNets
1.3.6.1.4.1.49.2.3.1.5.1NodeolNet
1.3.6.1.4.1.49.2.3.1.5.2NodeolEnet
1.3.6.1.4.1.49.2.3.1.5.3NodeolTRnet
1.3.6.1.4.1.49.2.3.1.5.4NodeolFDDInet
1.3.6.1.4.1.49.2.3.1.6NodeolGroups
1.3.6.1.4.1.49.2.3.1.7NodeolAlarm
1.3.6.1.4.1.49.2.3.1.7.1NodeolThresh
1.3.6.1.4.1.49.2.3.1.7.1.1NodeolThreshControl
1.3.6.1.4.1.49.2.3.2Nodeoebm
1.3.6.1.4.1.49.2.3.3Nodemidnight
1.3.6.1.4.1.49.2.3.4NodeworkGroupHub
1.3.6.1.4.1.49.2.3.4.1NodehubSysGroup
1.3.6.1.4.1.49.2.3.4.2NodehardwareGroup
1.3.6.1.4.1.49.2.3.4.3NodesoftwareGroup
1.3.6.1.4.1.49.2.3.4.4NodehubGroup
1.3.6.1.4.1.49.2.3.4.5NodeboardGroup
1.3.6.1.4.1.49.2.3.4.6NodeportGroup
1.3.6.1.4.1.49.2.3.4.7NodealarmGroup
1.3.6.1.4.1.49.2.3.5Nodeemm
1.3.6.1.4.1.49.2.3.6NodechipBridge
1.3.6.1.4.1.49.2.3.7Nodetrmm
1.3.6.1.4.1.49.2.3.8Nodefmm
1.3.6.1.4.1.49.2.3.9Nodefocus1
1.3.6.1.4.1.49.2.3.10Nodeoeim
1.3.6.1.4.1.49.2.4NodechipExperiment
1.3.6.1.4.1.49.2.4.1NodechipExpTokenRing
1.3.6.1.4.1.49.2.4.1.1Nodedot5
1.3.6.1.4.1.49.2.4.14Nodedot1dBridge
1.3.6.1.4.1.49.2.5NodechipTTY
1.3.6.1.4.1.49.2.5.1ScalarchipTTYNumberread-onlymandatoryThe number of terminal ports on this agent product.
1.3.6.1.4.1.49.2.5.2TablechipTTYTablenot-accessiblemandatoryA table of TTY specific information associated with this agent.
1.3.6.1.4.1.49.2.5.2.1RowchipTTYEntrynot-accessiblemandatoryA profile of a specific TTY interface associated with this agent.
1.3.6.1.4.1.49.2.5.2.1.1ColumnchipTTYIndexread-onlymandatoryThe TTY to which this entry refers.
1.3.6.1.4.1.49.2.5.2.1.2ColumnchipTTYBaudread-writemandatoryThe baud rate for this TTY. It should be noted that all serial ports do not support all of the above baud rates.
1.3.6.1.4.1.49.2.5.2.1.3ColumnchipTTYParityread-writemandatoryThe parity setting for this TTY.
1.3.6.1.4.1.49.2.5.2.1.4ColumnchipTTYStopread-writemandatoryThe number of stop bits for this TTY.
1.3.6.1.4.1.49.2.5.2.1.5ColumnchipTTYDataread-writemandatoryThe number of data bits for this TTY.
1.3.6.1.4.1.49.2.5.2.1.6ColumnchipTTYTimeoutread-writemandatoryThe number of minutes to wait before this agent logs out an inactive login session on this TTY. NOTE: In some implementations, this is a single variable that i…
1.3.6.1.4.1.49.2.5.2.1.7ColumnchipTTYPromptread-writemandatoryThe terminal prompt to display on this TTY. NOTE: In some implementations, this is a single variable that is used by all of the terminal and telnet sessions.
1.3.6.1.4.1.49.2.5.2.1.8ColumnchipTTYDTRread-writemandatoryThis value dictates the behavior of the RS-232 Data Terminal Ready (DTR) signal at the time a session ends due to a logout, timeout, or shutdown. This is used …
1.3.6.1.4.1.49.2.5.2.1.9ColumnchipTTYTerminalTyperead-writemandatoryA string which indicates the type of terminal that is attached to the serial port. It should be noted that the string is passed to a telnet server whenever the…
1.3.6.1.4.1.49.2.6NodechipTFTP
1.3.6.1.4.1.49.2.6.1ScalarchipTFTPStartread-writemandatorySetting chipTFTPStart to tftpGet(2) initiates a file transfer to the agent (download); tftpPut(3) initiates a file transfer to the server (upload).
1.3.6.1.4.1.49.2.6.2ScalarchipTFTPSlotread-writemandatoryThe slot number of the module that is to be involved in the TFTP transfer with the TFTP server (chipTFTPIpAddress).
1.3.6.1.4.1.49.2.6.3ScalarchipTFTPIpAddressread-writemandatoryThe IP Address of the TFTP server.
1.3.6.1.4.1.49.2.6.4ScalarchipTFTPFileNameread-writemandatoryThe file name of the file to retrieve (tftpGet), or the name of the file to create (tftpPut).
1.3.6.1.4.1.49.2.6.5ScalarchipTFTPFileTyperead-writemandatoryThe type of file image to upload/download. The file type indicates to the agent what kind of file it is receiving. flashCode(1) indicates a code upgrade of the…
1.3.6.1.4.1.49.2.6.6ScalarchipTFTPResultread-onlymandatoryThe result of the last TFTP operation.
1.3.6.1.4.1.49.2.7NodechipDownload
1.3.6.1.4.1.49.2.7.1ScalarchipDownloadUDKSerialread-writemandatoryA string representing the serial number of the Upgrade Distribution Kit.
1.3.6.1.4.1.49.2.7.2ScalarchipDownloadKeyread-writemandatoryThe key code provided by your VAR. Available by calling technical support at +1 508 460 6195.
1.3.6.1.4.1.49.2.7.3ScalarchipDownloadDateTimeread-onlymandatoryThe date of the last successful download in the format hh:mm day DD Mon YY