CIENA-CES-CFM-MIB
412 objects
This module defines the CFM configuration and notification objects.
Imported Objects
| CIENA-GLOBAL-MIB | cienaGlobalMacAddress cienaGlobalSeverity |
| CIENA-SMI | cienaCesConfig cienaCesNotifications cienaCesStatistics |
| CIENA-TC | CienaGlobalState CienaMacAddress CienaStatsClear |
| SNMPv2-SMI | Counter32 Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1271.2.1.4 | IdentitycienaCesCfmMIB | This module defines the CFM configuration and notification objects. | ||
| 1.3.6.1.4.1.1271.2.1.4.1 | NodecienaCesCfmMIBObjects | |||
| 1.3.6.1.4.1.1271.2.1.4.1.2 | NodecienaCesCfmService | |||
| 1.3.6.1.4.1.1271.2.1.4.1.2.1 | TablecienaCesCfmServiceTable | not-accessible | current | The (conceptual) table listing the configuration parameters for the CFM service table. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1 | RowcienaCesCfmServiceEntry | not-accessible | current | An entry (conceptual row) in the cienaCesCfmServiceTable. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.1 | ColumncienaCesCfmServiceIndex | not-accessible | current | A unique identifier for a CFM domain entry. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.2 | ColumncienaCesCfmServiceType | read-only | current | This object is used to specify the service type. The meaning of cienaCesCfmServiceValue depends on the value of this MIB object. This MIB object along with cie… |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.3 | ColumncienaCesCfmServiceValue | read-only | current | This object is used to specify the service value. The meaning of this object depends on the value of cienaCesCfmServiceType. This MIB object along with cienaCe… |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.4 | ColumncienaCesCfmServiceAdminState | read-only | current | This object indicates the administrative state of CFM for this service type. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.5 | ColumncienaCesCfmServiceOperState | read-only | current | This object indicates the operational state of CFM for this service type. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.6 | ColumncienaCesCfmServiceName | read-only | current | This MIB object indicates the CFM service name. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.7 | ColumncienaCesCfmServiceMdLevel | read-only | current | This MIB object indicates the maintenance domain level associated with the CFM service. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.8 | ColumncienaCesCfmServiceFaultState | read-only | current | When this object's state is disabled it suppresses all the corresponding CFM service related traps. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.9 | ColumncienaCesCfmServiceAlarmTime | read-only | current | This MIB object indicates the time interval that a service fault detected by cienaCesCfmServiceType must be present prior to triggering a fault alarm. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.10 | ColumncienaCesCfmServiceCCMInterval | read-only | current | This MIB object identifies the CCM transmission interval index for the service specified by cienaCesCfmServiceType. This determines the frequency at which CCMs… |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.11 | ColumncienaCesCfmServiceResetTime | read-only | current | This MIB object indicates the time interval during which no service faults can be detected before the service will reset a fault alarm. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.12 | ColumncienaCesCfmServiceLastFaultCCM | read-only | current | This MIB object shows the last received CCM fault. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.13 | ColumncienaCesCfmServiceRMEPFailureFlag | read-only | current | This MIB object indicates whether the RMEP failure flag is set. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.14 | ColumncienaCesCfmServiceCCMErrorFlag | read-only | current | This MIB object indicates whether the CCM error flag is set. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.15 | ColumncienaCesCfmServiceCrossConnectErrorFlag | read-only | current | This MIB object indicates whether the cross-connect error flag is set. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.16 | ColumncienaCesCfmServiceNumMEP | read-only | current | This MIB object shows the total number of MEPs. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.17 | ColumncienaCesCfmServiceNumRemoteMEP | read-only | current | This MIB object shows the total number of remote MEPs. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.18 | ColumncienaCesCfmServiceNumActiveMEP | read-only | current | This MIB object shows the number of active MEPs. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.19 | ColumncienaCesCfmServiceNextMepId | read-only | current | This MIB object indicates the next MEP ID for the given service. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.20 | ColumncienaCesCfmServiceAlarmPriority | read-only | current | |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.21 | ColumncienaCesCfmServiceNumCCMForFault | read-only | current | This MIB object indicates the number of CCM frames that must go undelivered for the PBB-TE tunnel before declaring the PBB-TE tunnel as operationally down. Thi… |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.22 | ColumncienaCesCfmServiceDMMInterval | read-only | current | |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.23 | ColumncienaCesCfmServiceLMMInterval | read-only | current | |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.24 | ColumncienaCesCfmServiceCCMLossStatsState | read-only | current | This object indicates the operational state of CCM loss accounting for RMEPs learned by this service type. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.25 | ColumncienaCesCfmServiceCCMLossBucketInterval | read-only | current | This object indicates the interval in minutes that each of the 96 CCM loss history buckets spans. The default is 15 minutes, which means the default history co… |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.26 | ColumncienaCesCfmServiceY1731 | read-only | current | This object indicates whether Y.1731 is enabled for the service. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.27 | ColumncienaCesCfmServiceTlvSenderIdType | read-only | current | This MIB object indicates the sender ID TLV Type. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.28 | ColumncienaCesCfmServiceRMEPHoldTime | read-only | current | This MIB object indicates the remote MEP hold time in milliseconds. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.29 | ColumncienaCesCfmServiceCCMTxState | read-only | current | This MIB object indicates the administrative state of the CCM Tx. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.30 | ColumncienaCesCfmServicePortStatusFlag | read-only | current | This MIB object shows the port status defect flag. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.31 | ColumncienaCesCfmServiceRDIFlag | read-only | current | This MIB object shows the RDI defect flag. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.32 | ColumncienaCesCfmServiceInstabilityFlag | read-only | current | This MIB object shows the instability defect flag. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.33 | ColumncienaCesCfmServiceRMEPAging | read-only | current | Controls automatic remote MEP aging for the service. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.34 | ColumncienaCesCfmServiceRMEPDiscovery | read-only | current | Controls automatic remote MEP discovery for the service. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.35 | ColumncienaCesCfmServiceChargedAgainstGlobalBudget | read-only | current | This MIB object reflects if this service is charged against the global frame budget. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.36 | ColumncienaCesCfmServiceControlModuleFrameBudget | read-only | current | CFM frame budget for the control timing module for the given service. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.37 | ColumncienaCesCfmServiceMulticastDa | read-only | current | This object indicates if multicast DA mode is enabled for the service. This object is relevant when the cienaCesCfmServiceType is PBT. |
| 1.3.6.1.4.1.1271.2.1.4.1.2.1.1.38 | ColumncienaCesCfmServiceCCMRxStats | read-only | current | Controls cfm rx debug stats for the service. |
| 1.3.6.1.4.1.1271.2.1.4.1.3 | NodecienaCesCfmMEP | |||
| 1.3.6.1.4.1.1271.2.1.4.1.3.1 | TablecienaCesCfmMEPTable | not-accessible | current | The (conceptual) table listing the configuration parameters for the CFM MEP table. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1 | RowcienaCesCfmMEPEntry | not-accessible | current | An entry (conceptual row) in the cienaCesCfmMEPTable. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.1 | ColumncienaCesCfmMEPId | not-accessible | current | This MIB object is used as the index in the table and indicates the MEP ID for the given service. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.2 | ColumncienaCesCfmMEPMacAddr | read-only | current | This object indicates the MAC address received on the given service and MEP ID. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.3 | ColumncienaCesCfmMEPAdminState | read-only | current | This object is used to specify the administrative state of the CFM MEP. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.4 | ColumncienaCesCfmMEPOperState | read-only | current | This object is used to specify the operational state of the CFM MEP. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.5 | ColumncienaCesCfmMEPDirection | read-only | current | This object is used to specify the MEP direction of the service. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.6 | ColumncienaCesCfmMEPCCMState | read-only | current | This object indicates the CCM transmission for the service specified by cienaCesCfmServiceType. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.7 | ColumncienaCesCfmMEPCCMPriority | read-only | current | This object indicates the priority of CCM messages transmitted. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.8 | ColumncienaCesCfmMEPLTMPriority | read-only | current | This object indicates the priority received on the given service and port. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.9 | ColumncienaCesCfmMEPLiType | read-only | current | This object indicates the logical interface type on which the MEP is created. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.10 | ColumncienaCesCfmMEPLiIndex | read-only | current | This object indicates the logical interface index for creating the MEP. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.11 | ColumncienaCesCfmMEPServiceName | read-only | current | This object is used to specify the service name assigned to this port. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.12 | ColumncienaCesCfmMEPSubPortName | read-only | current | This object indicates the sub-port, PBB-TE service or MPLS VC name assigned to the given service and port. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.13 | ColumncienaCesCfmMEPVsPbtName | read-only | current | This object indicates the virtual switch or PBB-TE tunnel assigned to the given service and port. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.14 | ColumncienaCesCfmMEPLogicalPortName | read-only | current | This object indicates the logical port name assigned to the given service and port. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.15 | ColumncienaCesCfmMEPSubPortIndex | read-only | current | This object is used to specify the CFM sub-port index. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.16 | ColumncienaCesCfmMEPEncapsulation | read-only | current | This object is used to specify the encapsulation applied to the service and port. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.17 | ColumncienaCesCfmMEPLeadPortSlotIndex | read-only | current | This object is used as to specify the agent slot that the MEP is in. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.18 | ColumncienaCesCfmMEPPBTBvid | read-only | current | This object indicates the BVID assigned to the given service and port. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.19 | ColumncienaCesCfmMEPPBTEtype | read-only | current | This object indicates the Ethertype assigned to the given service and port. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.20 | ColumncienaCesCfmMEPL2XformType | read-only | current | This object indicates the type of MEP L2 transform. no-op(1) type indicates that there is no MEP level transform. auto(2) type indicates that the MEP inherits … |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.21 | ColumncienaCesCfmMEPSignalDegradeMonitoringStatus | read-only | current | This object enables/disables signal degrading monitoring on the mep. |
| 1.3.6.1.4.1.1271.2.1.4.1.3.1.1.22 | ColumncienaCesCfmMEPSignalDegradeTriggerMode | read-only | current | This object sets the signal degrade trigger mode on the mep. nearEnd: In this mode, near end frame loss shall be compared with cienaCesCfmSyntheticLossSessionS… |
| 1.3.6.1.4.1.1271.2.1.4.1.4 | NodecienaCesCfmRemoteMEP | |||
| 1.3.6.1.4.1.1271.2.1.4.1.4.1 | TablecienaCesCfmRemoteMEPTable | not-accessible | current | The (conceptual) table listing the display parameters for the remote MEP table. |
| 1.3.6.1.4.1.1271.2.1.4.1.4.1.1 | RowcienaCesCfmRemoteMEPEntry | not-accessible | current | An entry (conceptual row) in the cienaCesCfmRemoteMEPTable. |
| 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.1 | ColumncienaCesCfmRemoteMEPID | not-accessible | current | This object is used as an index in the table and is used to specify the MEP ID. |
| 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.2 | ColumncienaCesCfmRemoteMEPMacAddr | read-only | current | This object is used to specify the MAC address of the logical port where the remote MEP is configured. |
| 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.3 | ColumncienaCesCfmRemoteMEPAdminState | read-only | current | This object is used to specify the administrative state of the remote MEP state machine. |
| 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.4 | ColumncienaCesCfmRemoteMEPOperState | read-only | current | This object is used to specify the operational state of the remote MEP state machine. |
| 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.5 | ColumncienaCesCfmRemoteMEPTime | read-only | current | This object is used to specify the time at which the remote MEP state machine last entered RMEP_FAILED or RMEP_OK states. |
| 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.6 | ColumncienaCesCfmRemoteMEPKLastMacStatus | read-only | current | This object is used to specify the last MAC status received. |
| 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.7 | ColumncienaCesCfmRemoteMEPFailureFlag | read-only | current | This object is used to specify the remote MEP failure flag. |
| 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.8 | ColumncienaCesCfmRemoteMEPCCMErrorFlag | read-only | current | This object is used to specify the MEP CCM error flag. |
| 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.9 | ColumncienaCesCfmRemoteMEPRDIErrorFlag | read-only | current | This object is used to specify the MEP RDI error flag. |
| 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.10 | ColumncienaCesCfmRemoteMEPSubPortName | read-only | current | The object indicates the subport name of the remote MEP. |
| 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.11 | ColumncienaCesCfmRemoteMEPServiceName | read-only | current | This object is used to specify the service name of the remote MEP. |
| 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.12 | ColumncienaCesCfmRemoteMEPLastPortStatus | read-only | current | This object is used as to specify the remote MEP last port status. |
| 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.13 | ColumncienaCesCfmRemoteMEPLastInterfaceStatus | read-only | current | This object is used as to specify the remote MEP interface status. |
| 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.14 | ColumncienaCesCfmRemoteMEPCCMLevel | read-only | current | This object indicates the remote MEP CCM level. |
| 1.3.6.1.4.1.1271.2.1.4.1.4.1.1.15 | ColumncienaCesCfmRemoteMEPHoldState | read-only | current | This object indicates the hold state for the remote MEP entry. |
| 1.3.6.1.4.1.1271.2.1.4.1.5 | NodecienaCesCfmDelay | |||
| 1.3.6.1.4.1.1271.2.1.4.1.5.1 | TablecienaCesCfmDelayMsgTable | not-accessible | current | The (conceptual) table listing the configuration parameters for the DelayMeasurementMsg. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1 | RowcienaCesCfmDelayMsgEntry | not-accessible | current | An entry (conceptual row) in the cienaCesCfmDelayMsgTable. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.1 | ColumncienaCesCfmDelayMsgLocalMEPId | not-accessible | current | This object is used to specify the local MEP ID. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.2 | ColumncienaCesCfmDelayMsgTargetMEPID | read-only | current | This object is used to specify the MEP ID. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.3 | ColumncienaCesCfmDelayMsgServiceName | read-only | current | This object indicates the service associated with the delay message. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.4 | ColumncienaCesCfmDelayMsgAverageDelayThreshold | read-only | current | This object indicates the threshold for the average delay in microseconds. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.5 | ColumncienaCesCfmDelayMsgAverageJitterThreshold | read-only | current | This object indicates the threshold value for average jitter in microseconds. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.6 | ColumncienaCesCfmDelayMsgMaximumDelayThreshold | read-only | current | This object indicates the threshold for the maximum delay. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.7 | ColumncienaCesCfmDelayMsgMaximumJitterThreshold | read-only | current | This object indicates the threshold value for maximum jitter. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.8 | ColumncienaCesCfmDelayMsgAverageDelay | read-only | current | This object indicates the average delay. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.9 | ColumncienaCesCfmDelayMsgAverageJitter | read-only | current | This object indicates the average jitter. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.10 | ColumncienaCesCfmDelayMsgMaximumDelay | read-only | current | This object indicates the maximum delay. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.11 | ColumncienaCesCfmDelayMsgMaximumJitter | read-only | current | This object indicates the maximum jitter. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.12 | ColumncienaCesCfmDelayMsgMinimumDelay | read-only | current | This object indicates the minimum delay. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.13 | ColumncienaCesCfmDelayMsgMinimumJitter | read-only | current | This object indicates the minimum jitter. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.14 | ColumncienaCesCfmDelayMsgAverageDelayVariation | read-only | current | This object indicates the Average Inter Frame Delay Variation. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.15 | ColumncienaCesCfmDelayMsgMaximumDelayVariation | read-only | current | This object indicates the Maximum Inter Frame Delay Variation. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.16 | ColumncienaCesCfmDelayMsgMinimumDelayVariation | read-only | current | This object indicates the Minimum Inter Frame Delay Variation. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.17 | ColumncienaCesCfmDelayMsgAverageDelayVariationThreshold | read-only | current | This object indicates the threshold value for average Inter Frame Delay Variation. A value of -1 disables the generation of faults. A value of 0 or greater is … |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.18 | ColumncienaCesCfmDelayMsgMaximumDelayVariationThreshold | read-only | current | This object indicates the threshold value for maximum Inter Frame Delay Variation. A value of -1 disables the generation of faults. A value of 0 or greater is … |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.19 | ColumncienaCesCfmDelayMsgPriority | read-only | current | This object specifies the priority that will be encoded in the DMM message. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.20 | ColumncienaCesCfmDelayMsgCount | read-only | current | This object specifies the number of DMM messages that will be transmitted for one Iteration. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.21 | ColumncienaCesCfmDelayMsgIterations | read-only | current | This object specifies the number of iterations the test has to be conducted. A zero value means that test is continuous, and iterations are infinite. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.22 | ColumncienaCesCfmDelayMsgRepeatDelay | read-only | current | This object specifies the delay in minutes between consecutive test iterations. |
| 1.3.6.1.4.1.1271.2.1.4.1.5.1.1.23 | ColumncienaCesCfmDelayMsgDuration | read-only | current | This object specifies the duration of time the test took in seconds to complete one iteration. |
| 1.3.6.1.4.1.1271.2.1.4.1.6 | NodecienaCesCfmFrameLoss | |||
| 1.3.6.1.4.1.1271.2.1.4.1.6.1 | TablecienaCesCfmFrameLossMsgTable | not-accessible | current | The (conceptual) table listing the configuration parameters for the FrameLossMeasurementMsg. |
| 1.3.6.1.4.1.1271.2.1.4.1.6.1.1 | RowcienaCesCfmFrameLossMsgEntry | not-accessible | current | An entry (conceptual row) in the cienaCesCfmFrameLossMsgTable. |
| 1.3.6.1.4.1.1271.2.1.4.1.6.1.1.1 | ColumncienaCesCfmFrameLossMsgLocalMEPId | not-accessible | current | This object is used to specify the local MEP ID at the source. |
| 1.3.6.1.4.1.1271.2.1.4.1.6.1.1.2 | ColumncienaCesCfmFrameLossMsgTargetMEPID | read-only | current | This object is used to specify the MEP ID. |
| 1.3.6.1.4.1.1271.2.1.4.1.6.1.1.3 | ColumncienaCesCfmFrameLossMsgNearLossThreshold | read-only | current | Indicates the threshold value for the near-end frame loss. |
| 1.3.6.1.4.1.1271.2.1.4.1.6.1.1.4 | ColumncienaCesCfmFrameLossMsgFarLossThreshold | read-only | current | This object indicates the threshold value for the far-end frame loss. |
| 1.3.6.1.4.1.1271.2.1.4.1.6.1.1.5 | ColumncienaCesCfmFrameLossMsgServiceName | read-only | current | This object indicates the service associated with the frame loss measurement message (LMM). |
| 1.3.6.1.4.1.1271.2.1.4.1.6.1.1.6 | ColumncienaCesCfmFrameLossMsgFrameLossNear | read-only | current | This object indicates the near-end frame loss. For a MEP, near-end frame loss refers to frame loss associated with the ingress data frames. |
| 1.3.6.1.4.1.1271.2.1.4.1.6.1.1.7 | ColumncienaCesCfmFrameLossMsgFrameLossFar | read-only | current | This object indicates the far-end frame loss. For a MEP, far-end frame loss refers to frame loss associated with the egress data frames. |
| 1.3.6.1.4.1.1271.2.1.4.1.7 | NodecienaCesCfmServiceFaultNotifAttrs | |||
| 1.3.6.1.4.1.1271.2.1.4.1.7.1 | TablecienaCesCfmServiceFaultNotifTable | not-accessible | current | The (conceptual) table listing the configuration parameters for the CFM service table. |
| 1.3.6.1.4.1.1271.2.1.4.1.7.1.1 | RowcienaCesCfmServiceFaultNotifEntry | not-accessible | current | An entry (conceptual row) in the cienaCesCfmServiceFaultNotifTable. |
| 1.3.6.1.4.1.1271.2.1.4.1.7.1.1.1 | ColumncienaCesCfmServiceFaultTime | accessible-for-notify | current | This object indicates the time at which the fault occurred. |
| 1.3.6.1.4.1.1271.2.1.4.1.7.1.1.2 | ColumncienaCesCfmServiceFaultType | accessible-for-notify | current | This object indicates the type of fault. |
| 1.3.6.1.4.1.1271.2.1.4.1.7.1.1.3 | ColumncienaCesCfmServiceFaultDesc | accessible-for-notify | current | This object indicates the description of the fault. |
| 1.3.6.1.4.1.1271.2.1.4.1.7.1.1.4 | ColumncienaCesCfmServiceFaultMep | accessible-for-notify | current | This object indicates the MEP ID of the MEP reporting the fault. |
| 1.3.6.1.4.1.1271.2.1.4.1.7.1.1.5 | ColumncienaCesCfmServiceVsPbtName | accessible-for-notify | current | This object indicates the virtual switch or PBB-TE tunnel assigned to the given service. |
| 1.3.6.1.4.1.1271.2.1.4.1.8 | NodecienaCesCfmMaintenance | |||
| 1.3.6.1.4.1.1271.2.1.4.1.8.1 | TablecienaCesCfmMaintenanceDomainTable | not-accessible | current | The (conceptual) table listing the configuration parameters for the CFM maintenance domain table. |
| 1.3.6.1.4.1.1271.2.1.4.1.8.1.1 | RowcienaCesCfmMaintenanceDomainEntry | not-accessible | current | An entry (conceptual row) in the cienaCesCfmMaintenanceDomainTable. |
| 1.3.6.1.4.1.1271.2.1.4.1.8.1.1.1 | ColumncienaCesCfmMaintenanceDomainIndex | read-only | current | This object indicates the unique index in the table. |
| 1.3.6.1.4.1.1271.2.1.4.1.8.1.1.2 | ColumncienaCesCfmMaintenanceDomainLevel | read-only | current | This object indicates the maintenance domain level. |
| 1.3.6.1.4.1.1271.2.1.4.1.8.1.1.3 | ColumncienaCesCfmMaintenanceDomainName | read-only | current | This object indicates the maintenance domain name. |
| 1.3.6.1.4.1.1271.2.1.4.1.8.1.1.4 | ColumncienaCesCfmMaintenanceDomainServiceCount | read-only | current | This object indicates the number of CFM services mapped to this maintenance domain. |
| 1.3.6.1.4.1.1271.2.1.4.1.9 | NodecienaCesCfmServiceFrameBudget | |||
| 1.3.6.1.4.1.1271.2.1.4.1.9.1 | TablecienaCesCfmServiceFrameBudgetTable | not-accessible | current | The (conceptual) table listing the configuration parameters for the CFM service frame budget table. |
| 1.3.6.1.4.1.1271.2.1.4.1.9.1.1 | RowcienaCesCfmServiceFrameBudgetEntry | not-accessible | current | An entry (conceptual row) in the cienaCesCfmServiceFrameBudgetTable. |
| 1.3.6.1.4.1.1271.2.1.4.1.9.1.1.1 | ColumncienaCesCfmSlotIndex | not-accessible | current | This object indicates the slot number. |
| 1.3.6.1.4.1.1271.2.1.4.1.9.1.1.2 | ColumncienaCesCfmServiceFrameBudgetSlot | read-only | current | This object indicates the CFM frame budget for the slot for the given service. |
| 1.3.6.1.4.1.1271.2.1.4.1.10 | NodecienaCesCfmFrameBudgetGlobal | |||
| 1.3.6.1.4.1.1271.2.1.4.1.10.1 | ScalarcienaCesCfmGlobalControlModuleFrameBudget | read-only | current | Control Module Frame Budget. |
| 1.3.6.1.4.1.1271.2.1.4.1.10.2 | TablecienaCesCfmFrameBudgetGlobalTable | not-accessible | current | The (conceptual) table listing the configuration parameters for the CFM global frame budget table. |
| 1.3.6.1.4.1.1271.2.1.4.1.10.2.1 | RowcienaCesCfmFrameBudgetGlobalEntry | not-accessible | current | An entry (conceptual row) in the cienaCesCfmGlobalFrameBudgetTable. |
| 1.3.6.1.4.1.1271.2.1.4.1.10.2.1.1 | ColumncienaCesCfmFrameBudgetGlobalSlot | read-only | current | This object indicates the global CFM frame budget for the slot. |
| 1.3.6.1.4.1.1271.2.1.4.1.11 | NodecienaCesCfmGlobal | |||
| 1.3.6.1.4.1.1271.2.1.4.1.11.1 | ScalarcienaCesCfmState | read-only | current | This object indicates the globally configured CFM state. |
| 1.3.6.1.4.1.1271.2.1.4.1.11.2 | ScalarcienaCesCfmEtherType | read-only | current | This object indicates the Ethertype value used for CFM frames. |
| 1.3.6.1.4.1.1271.2.1.4.1.11.3 | ScalarcienaCesCfmMEPHoldTime | read-only | current | This object indicates the time to hold a MEP in an inactive state. |
| 1.3.6.1.4.1.1271.2.1.4.1.11.4 | ScalarcienaCesCfmY1731EtherType | read-only | current | This object indicates the optional alternate Ethertype for Y.1731 frames. |
| 1.3.6.1.4.1.1271.2.1.4.1.11.5 | ScalarcienaCesCfmGlobalSLMDefaultCount | read-only | current | The global default count for synthetic loss measurement tests. |
| 1.3.6.1.4.1.1271.2.1.4.1.11.6 | ScalarcienaCesCfmGlobalSLMDefaultInterval | read-only | current | |
| 1.3.6.1.4.1.1271.2.1.4.1.11.7 | ScalarcienaCesCfmGlobalSLMDefaultTimeout | read-only | current | The global default timeout for synthetic loss measurement tests. |
| 1.3.6.1.4.1.1271.2.1.4.1.12 | NodecienaCesCfmSyntheticLoss | |||
| 1.3.6.1.4.1.1271.2.1.4.1.12.1 | TablecienaCesCfmSyntheticLossSessionTable | not-accessible | current | The (conceptual) table listing the configuration parameters for the SyntheticLossMeasurement(SLM) message. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1 | RowcienaCesCfmSyntheticLossSessionEntry | not-accessible | current | An entry in the cienaCesCfmSyntheticLossSessionTable. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.1 | ColumncienaCesCfmSyntheticLossSessionServiceIndex | not-accessible | current | This object specifies the service index of the SLM message. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.2 | ColumncienaCesCfmSyntheticLossSessionLocalMEPId | not-accessible | current | This object specifies the local mep id of the SLM message. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.3 | ColumncienaCesCfmSyntheticLossSessionTargetMEPId | not-accessible | current | This object specifies the target mepid of the SLM message. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.4 | ColumncienaCesCfmSyntheticLossSessionTestId | not-accessible | current | This object specifies the test ID of the SLM message. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.5 | ColumncienaCesCfmSyntheticLossSessionServiceName | read-only | current | This object specifies the service name of the SLM message. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.6 | ColumncienaCesCfmSyntheticLossSessionPriority | read-only | current | This object specifies the priority that will be encoded in the SLM message. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.7 | ColumncienaCesCfmSyntheticLossSessionCount | read-only | current | This object specifies the number of SLM messages that will be transmitted during this session. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.8 | ColumncienaCesCfmSyntheticLossSessionSLMInterval | read-only | current | |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.9 | ColumncienaCesCfmSyntheticLossSessionIterations | read-only | current | This object specifies the number of iterations the test has to be conducted. Each test iteration is defined by <cienaCesCfmSyntheticLossMsgSLMInterval, cienaCe… |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.10 | ColumncienaCesCfmSyntheticLossSessionRepeatDelay | read-only | current | This object specifies the delay in minutes between consecutive test iterations. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.11 | ColumncienaCesCfmSyntheticLossSessionFrameSize | read-only | current | This object specifies the size in bytes of the CFM base frame. If this object specifies zero there is no padding. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.12 | ColumncienaCesCfmSyntheticLossSessionTimeout | read-only | current | This object specifies the timeout interval in milliseconds within which the source should receive a SLR for a corresponding SLM Msg. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.13 | ColumncienaCesCfmSyntheticLossSessionDuration | read-only | current | This object specifies the duration of time the test took in milliseconds to complete one iteration. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.14 | ColumncienaCesCfmSyntheticLossSessionLossNearThreshold | read-only | current | This object represents the Near Loss Threshold Fault for the Synthetic Loss Measurement test. A value of -1 disables the generation of faults. A value of 0 or … |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.15 | ColumncienaCesCfmSyntheticLossSessionLossFarThreshold | read-only | current | This object represents the Far Loss Threshold Fault for the Synthetic Loss Measurement test. A value of -1 disables the generation of faults. A value of 0 or g… |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.16 | ColumncienaCesCfmSyntheticLossSessionNumSLMSent | read-only | current | This object specifies the number of SLM messages sent in the latest test iteration. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.17 | ColumncienaCesCfmSyntheticLossSessionNumSLRReceived | read-only | current | This object specifies the number of SLR messages received in the latest test iteration. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.18 | ColumncienaCesCfmSyntheticLossSessionFrameLossNear | read-only | current | This object specifies the Near Loss Threshold in the latest test iteration. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.19 | ColumncienaCesCfmSyntheticLossSessionFrameLossFar | read-only | current | This object specifies the Far Loss Threshold in the latest test iteration. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.20 | ColumncienaCesCfmSyntheticLossSessionAvgFrameLossNear | read-only | current | This object specifies the average Near Loss Threshold of the test session. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.21 | ColumncienaCesCfmSyntheticLossSessionMinFrameLossNear | read-only | current | This object specifies the minimum Near Loss Threshold of the test session. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.22 | ColumncienaCesCfmSyntheticLossSessionMaxFrameLossNear | read-only | current | This object specifies the maximum Near Loss Threshold of the test session. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.23 | ColumncienaCesCfmSyntheticLossSessionAvgFrameLossFar | read-only | current | This object specifies the average Far Loss Threshold of the test session. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.24 | ColumncienaCesCfmSyntheticLossSessionMinFrameLossFar | read-only | current | This object specifies the minimum Far Loss Threshold of the test session. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.25 | ColumncienaCesCfmSyntheticLossSessionMaxFrameLossFar | read-only | current | This object specifies the maximum Far Loss Threshold of the test session. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.26 | ColumncienaCesCfmSyntheticLossSessionFrameLossRatioNear | read-only | current | This object specifies the Frame Loss Ratio in percentile of loss at Nearend in the last iteration of the completed test. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.27 | ColumncienaCesCfmSyntheticLossSessionFrameLossRatioFar | read-only | current | This object specifies the Frame Loss Ratio in percentile of loss at Farend in the last iteration of the completed test. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.28 | ColumncienaCesCfmSyntheticLossSessionSdSetThreshold | read-only | current | This object represents the signal degrade set threshold value for the synthetic loss measurement test. A value of 0 or greater is compared to the frame loss re… |
| 1.3.6.1.4.1.1271.2.1.4.1.12.1.1.29 | ColumncienaCesCfmSyntheticLossSessionSdClearThreshold | read-only | current | This object represents the signal degrade clear threshold value for the synthetic loss measurement test. A value of 0 or greater is compared to the frame loss … |
| 1.3.6.1.4.1.1271.2.1.4.1.12.2 | TablecienaCesCfmSyntheticLossResponderTable | not-accessible | current | The (conceptual) table lists the Synthetic Loss Measurement (SLM) responders. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.2.1 | RowcienaCesCfmSyntheticLossResponderEntry | not-accessible | current | An entry (conceptual row) in the cienaCesCfmSyntheticLossResponderTable. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.2.1.1 | ColumncienaCesCfmSyntheticLossResponderServiceIndex | not-accessible | current | This object specifies the service index of the SLM responder. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.2.1.2 | ColumncienaCesCfmSyntheticLossResponderLocalMEPId | not-accessible | current | This object specifies the local mep id of the SLM responder. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.2.1.3 | ColumncienaCesCfmSyntheticLossResponderRemoteMEPId | not-accessible | current | This object specifies the remote mep id of the SLM responder. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.2.1.4 | ColumncienaCesCfmSyntheticLossResponderTestId | not-accessible | current | This object specifies the test ID of the SLM responder. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.2.1.5 | ColumncienaCesCfmSyntheticLossResponderServiceName | read-only | current | This object specifies the service name of the SLM responder. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.2.1.6 | ColumncienaCesCfmSyntheticLossResponderLocalMac | read-only | current | This object identifies the MAC address of the local mep. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.2.1.7 | ColumncienaCesCfmSyntheticLossResponderRemoteMac | read-only | current | This object identifies the MAC address of the remote mep. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.2.1.8 | ColumncienaCesCfmSyntheticLossResponderNumSLMReceived | read-only | current | This object specifies the number of SLM frames received by this responder. |
| 1.3.6.1.4.1.1271.2.1.4.1.12.2.1.9 | ColumncienaCesCfmSyntheticLossResponderNumSLRSent | read-only | current | This object specifies the number of SLR frames sent by this responder. |
| 1.3.6.1.4.1.1271.2.2.5 | NodecienaCesCfmNotifMIBNotificationPrefix | |||
| 1.3.6.1.4.1.1271.2.2.5.0 | NodecienaCesCfmNotifMIBNotification | |||
| 1.3.6.1.4.1.1271.2.2.5.0.1 | NotificationcienaCesCfmFaultTrapSet | current | A notification is sent whenever the fault is detected. Setting the cienaCesCfmFaultTrapState object to 'disabled' causes this trap to be suppressed. Variable b… | |
| 1.3.6.1.4.1.1271.2.2.5.0.2 | NotificationcienaCesCfmFaultTrapClear | current | A notification is sent whenever the fault is resolved and cleared. Setting the cienaCesCfmFaultTrapState object to 'disabled' causes this trap to be suppressed… | |
| 1.3.6.1.4.1.1271.2.2.5.0.3 | NotificationcienaCesCfmAverageDelayFaultTrapSet | current | A notification is sent whenever average delay goes above delay-threshold during a delay measurement test. Setting the cienaCesCfmDelayFaultTrapState object to … | |
| 1.3.6.1.4.1.1271.2.2.5.0.4 | NotificationcienaCesCfmAverageDelayFaultTrapClear | current | A notification is sent whenever average delay comes back to normal. Setting the cienaCesCfmDelayFaultTrapState object to 'disabled' causes this trap to be supp… | |
| 1.3.6.1.4.1.1271.2.2.5.0.5 | NotificationcienaCesCfmMaximumDelayFaultTrapSet | current | A notification is sent whenever maximum delay goes above delay-threshold during a delay measurement test. Setting the cienaCesCfmDelayFaultTrapState object to … | |
| 1.3.6.1.4.1.1271.2.2.5.0.6 | NotificationcienaCesCfmMaximumDelayFaultTrapClear | current | A notification is sent whenever maximum delay comes back to normal. Setting the cienaCesCfmDelayFaultTrapState object to 'disabled' causes this trap to be supp… | |
| 1.3.6.1.4.1.1271.2.2.5.0.7 | NotificationcienaCesCfmAverageJitterTrapSet | current | A notification is sent whenever average jitter goes above average jitter-threshold during a jitter measurement test. Setting the cienaCesCfmJitterFaultTrapStat… | |
| 1.3.6.1.4.1.1271.2.2.5.0.8 | NotificationcienaCesCfmAverageJitterTrapClear | current | A notification is sent whenever average jitter comes back to normal. Setting the cienaCesCfmJitterFaultTrapState object to 'disabled' causes this trap to be su… | |
| 1.3.6.1.4.1.1271.2.2.5.0.9 | NotificationcienaCesCfmMaximumJitterTrapSet | current | A notification is sent whenever maximum jitter goes above maximum jitter-threshold during a jitter measurement test. Setting the cienaCesCfmJitterFaultTrapStat… | |
| 1.3.6.1.4.1.1271.2.2.5.0.10 | NotificationcienaCesCfmMaximumJitterTrapClear | current | A notification is sent whenever maximum jitter comes back to normal. Setting the cienaCesCfmJitterFaultTrapState object to 'disabled' causes this trap to be su… | |
| 1.3.6.1.4.1.1271.2.2.5.0.11 | NotificationcienaCesCfmFrameLossNearTrapSet | current | A notification is sent whenever frame-loss-near goes above frame-loss-near threshold during a frame loss measurement test. Setting the cienaCesCfmFrameLossNear… | |
| 1.3.6.1.4.1.1271.2.2.5.0.12 | NotificationcienaCesCfmFrameLossNearTrapClear | current | A notification is sent whenever frame-loss-near returns to normal during a frame loss measurement test. Setting the cienaCesCfmFrameLossNearFaultTrapState obje… | |
| 1.3.6.1.4.1.1271.2.2.5.0.13 | NotificationcienaCesCfmFrameLossFarTrapSet | current | A notification is sent whenever frame-loss-far goes above frame-loss-far threshold during a frame loss measurement test. Setting the cienaCesCfmFrameLossFarFau… | |
| 1.3.6.1.4.1.1271.2.2.5.0.14 | NotificationcienaCesCfmFrameLossFarTrapClear | current | A notification is sent whenever frame-loss-far returns to normal during a frame loss measurement test. Setting the cienaCesCfmFrameLossFarFaultTrapState object… | |
| 1.3.6.1.4.1.1271.2.2.5.0.15 | NotificationcienaCesSyntheticLossSessionNearFaultTrap | current | A notification is sent whenever the fault is detected during a Synthetic Loss Measurement test with a near loss threshold fault. Setting the cienaCesCfmSynthet… | |
| 1.3.6.1.4.1.1271.2.2.5.0.16 | NotificationcienaCesSyntheticLossSessionFarFaultTrap | current | A notification is sent whenever the fault is detected during a Synthetic Loss Measurement test with a far loss threshold fault. Setting the cienaCesCfmSyntheti… | |
| 1.3.6.1.4.1.1271.2.2.5.0.17 | NotificationcienaCesSyntheticLossSessionNearFaultClearTrap | current | A notification is sent whenever the fault is cleared during a Synthetic Loss Measurement test with a near loss threshold fault.Setting the cienaCesCfmSynthetic… | |
| 1.3.6.1.4.1.1271.2.2.5.0.18 | NotificationcienaCesSyntheticLossSessionFarFaultClearTrap | current | A notification is sent whenever the fault is cleared during a Synthetic Loss Measurement test with a far loss threshold fault.Setting the cienaCesCfmSyntheticL… | |
| 1.3.6.1.4.1.1271.2.2.5.0.19 | NotificationcienaCesCfmAverageDelayVariationTrapSet | current | A notification is sent whenever Average Delay Variation goes above Average Delay Variation threshold during a Delay Variation measurement test. Setting the cie… | |
| 1.3.6.1.4.1.1271.2.2.5.0.20 | NotificationcienaCesCfmAverageDelayVariationTrapClear | current | A notification is sent whenever Average Delay Variation comes back below the threshold level during a Delay Variation measurement test. Setting the cienaCesCfm… | |
| 1.3.6.1.4.1.1271.2.2.5.0.21 | NotificationcienaCesCfmMaximumDelayVariationTrapSet | current | A notification is sent whenever Maximum Delay Variation goes above Maximum Delay Variation threshold during a Delay Variation measurement test. Setting the cie… | |
| 1.3.6.1.4.1.1271.2.2.5.0.22 | NotificationcienaCesCfmMaximumDelayVariationTrapClear | current | A notification is sent whenever Maximum Delay Variation comes back below the threshold level during a Delay Variation measurement test. Setting the cienaCesCfm… | |
| 1.3.6.1.4.1.1271.2.2.5.0.23 | NotificationcienaCesCfmSyntheticLossSessionSignalDegradeFaultTrapSet | current | A notification is sent whenever the signal degrade fault is detected during a Synthetic Loss Measurement test. | |
| 1.3.6.1.4.1.1271.2.2.5.0.24 | NotificationcienaCesCfmSyntheticLossSessionSignalDegradeFaultTrapClear | current | A notification is sent whenever the signal degrade fault is cleared during a Synthetic Loss Measurement test. | |
| 1.3.6.1.4.1.1271.2.3.4 | NodecienaCesCfmStatisticsMIBObjects | |||
| 1.3.6.1.4.1.1271.2.3.4.1 | NodecienaCesCfmMibObjects | |||
| 1.3.6.1.4.1.1271.2.3.4.1.1 | NodecienaCesCfmGlobalMIBObjects | |||
| 1.3.6.1.4.1.1271.2.3.4.1.1.1 | ScalarcienaCesCfmGlobalStatsClear | read-write | current | Setting this object clears CFM statistics globally. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.2 | NodecienaCesCfmGlobalFrameBudget | |||
| 1.3.6.1.4.1.1271.2.3.4.1.1.2.1 | ScalarcienaCesCfmGlobalFrameBudgetControlModule | read-only | deprecated | Control Module Frame Budget is deprecated because it is moved from statistics to node definitions. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.2.2 | ScalarcienaCesCfmGlobalFrameBudgetSlot1 | read-only | deprecated | Slot1 Frame Budget. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.2.3 | ScalarcienaCesCfmGlobalFrameBudgetSlot2 | read-only | deprecated | Slot2 Frame Budget. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.2.4 | ScalarcienaCesCfmGlobalFrameBudgetSlot3 | read-only | deprecated | Slot3 Frame Budget. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.2.5 | ScalarcienaCesCfmGlobalFrameBudgetSlot4 | read-only | deprecated | Slot4 Frame Budget. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.2.6 | ScalarcienaCesCfmGlobalFrameBudgetSlot5 | read-only | deprecated | Slot5 Frame Budget. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.2.7 | ScalarcienaCesCfmGlobalFrameBudgetSlot6 | read-only | deprecated | Slot6 Frame Budget. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.2.8 | ScalarcienaCesCfmGlobalFrameBudgetSlot7 | read-only | deprecated | Slot7 Frame Budget. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.2.9 | ScalarcienaCesCfmGlobalFrameBudgetSlot8 | read-only | deprecated | Slot8 Frame Budget. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.2.10 | ScalarcienaCesCfmGlobalFrameBudgetSlot9 | read-only | deprecated | Slot9 Frame Budget. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.2.11 | ScalarcienaCesCfmGlobalFrameBudgetSlot10 | read-only | deprecated | Slot10 Frame Budget. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.3 | NodecienaCesCfmGlobalStats | |||
| 1.3.6.1.4.1.1271.2.3.4.1.1.3.1 | ScalarcienaCesCfmGlobalStatsTxTotalFrames | read-only | current | The number of CFM frames sent. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.3.2 | ScalarcienaCesCfmGlobalStatsTxFloodedframes | read-only | current | The number of flooded frames sent. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.3.3 | ScalarcienaCesCfmGlobalStatsTxFloodignoredInvalidLevel | read-only | current | This counter is incremented when the frame's destination MAC is not the expected multicast destination MAC for the frame's MD level. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.3.4 | ScalarcienaCesCfmGlobalStatsTxFloodignoredHighLevelMepExist | read-only | current | This counter is incremented when there is a MEP at a higher MD level than the frame's MD level that blocks the frame from being flooded. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.3.5 | ScalarcienaCesCfmGlobalStatsTxFloodignoredSTPState | read-only | current | This counter is incremented when the STP state of the ingress or egress port is something other than forwarding. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.3.6 | ScalarcienaCesCfmGlobalStatsRxTotalFrames | read-only | current | The number of frames received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.3.7 | ScalarcienaCesCfmGlobalStatsRxDropInvalidEtype | read-only | current | The number of frames dropped when the mode is administratively disabled. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.3.8 | ScalarcienaCesCfmGlobalStatsRxDropInvalidOpCode | read-only | current | The number of received invalid opcode frames dropped. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.3.9 | ScalarcienaCesCfmGlobalStatsRxDropL2DAHeaderLevelMismatch | read-only | current | The number of frames dropped when the system is not in STP forwarding mode. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.3.10 | ScalarcienaCesCfmGlobalStatsRxTotalMalformedFrames | read-only | current | The number of malformed CFM frames received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4 | NodecienaCesCfmGlobalCCMStats | |||
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.1 | ScalarcienaCesCfmGlobalCCMStatsTxTotalCCM | read-only | current | The total number of CCM frames sent. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.2 | ScalarcienaCesCfmGlobalCCMStatsTxTotalCCMFlooded | read-only | current | The total number of flooded CCM frames sent. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.3 | ScalarcienaCesCfmGlobalCCMStatsRxTotalCCM | read-only | current | The number of valid frames received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.5 | ScalarcienaCesCfmGlobalCCMStatsRxTotalCCMSequenceErrors | read-only | current | The number of errored CCM frames received in sequence. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.6 | ScalarcienaCesCfmGlobalCCMStatsRxInvalidMAID | read-only | current | The number of MD level CFM frames received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.7 | ScalarcienaCesCfmGlobalCCMStatsRxInvalidCCMInterval | read-only | current | The number of MAID Xcon CFM frames received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.8 | ScalarcienaCesCfmGlobalCCMStatsRxInvalidFirstTlvOffset | read-only | current | The number of frames dropped when the mode is administratively disabled. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.9 | ScalarcienaCesCfmGlobalCCMStatsRxInvalidPortStatusTlv | read-only | current | The number of CCM frames received with invalid port status TLV. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.11 | ScalarcienaCesCfmGlobalCCMStatsRxInvalidInterfaceStatusTlv | read-only | current | The number of invalid CCM frames received with invalid interface status TLV. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.12 | ScalarcienaCesCfmGlobalCCMStatsRxInvalidLogicalInterface | read-only | current | The number of invalid CCM frames received with invalid logical interface status TLV. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.13 | ScalarcienaCesCfmGlobalCCMStatsRxInvalidServiceInstance | read-only | current | The number of invalid CCM frames received on invalid service instance. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.14 | ScalarcienaCesCfmGlobalCCMStatsRxInvalidPBTEncapTunnel | read-only | current | The number of invalid CCM frames received on invalid PBB-TE encapsulation tunnel. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.15 | ScalarcienaCesCfmGlobalCCMStatsRxDropAdminDisable | read-only | current | The number of CCM frames dropped because of a disabled administrative state. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.16 | ScalarcienaCesCfmGlobalCCMStatsRxDropSTPstatenotForwarding | read-only | current | The number of CCM frames dropped because STP state was not forwarding. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.17 | ScalarcienaCesCfmGlobalCCMStatsRxDropCCMBlockedbyOppMep | read-only | current | The number of invalid CCM frames dropped because CCM was blocked by opposite MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.18 | ScalarcienaCesCfmGlobalCCMStatsRxDropCCMLeakage | read-only | current | The number of CCM frames dropped because of CCM leakage. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.19 | ScalarcienaCesCfmGlobalCCMStatsRxDropCCMTooLong | read-only | current | The number of invalid CCM received frames dropped because CCM was too long. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.20 | ScalarcienaCesCfmGlobalCCMStatsRxDropCCMServiceDisabled | read-only | current | The number of CCM frames received and dropped because the service was disabled. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.21 | ScalarcienaCesCfmGlobalCCMStatsRxTotalErrorCCM | read-only | current | The number of CCM frames received with Error CCM fault. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.22 | ScalarcienaCesCfmGlobalCCMStatsRxTotalMalformedCCM | read-only | current | The number of malformed CCM frames received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.23 | ScalarcienaCesCfmGlobalCCMStatsRxTotalMEPCCM | read-only | current | The number of CCM frames received by CFM MEPs. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.4.24 | ScalarcienaCesCfmGlobalCCMStatsRxTotalMIPCCM | read-only | current | The number of CCM frames received by CFM MIPs. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.5 | NodecienaCesCfmGlobalLoopbackStats | |||
| 1.3.6.1.4.1.1271.2.3.4.1.1.5.1 | ScalarcienaCesCfmGlobalLoopbackStatsTxTotalLBM | read-only | current | The number of loopback message frames sent. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.5.2 | ScalarcienaCesCfmGlobalLoopbackStatsTxTotalLBR | read-only | current | The total number of loopback reply frames sent. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.5.3 | ScalarcienaCesCfmGlobalLoopbackStatsRxTotalLBM | read-only | current | The total number of loopback message frames received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.5.4 | ScalarcienaCesCfmGlobalLoopbackStatsRxTotalLBR | read-only | current | The total number of loopback reply frames received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.5.5 | ScalarcienaCesCfmGlobalLoopbackStatsRxTotalInOrderLBR | read-only | current | The total number of in order loopback reply frames received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.5.6 | ScalarcienaCesCfmGlobalLoopbackStatsRxTotalOutOfOrderLBR | read-only | current | The total number of out of order loopback reply frames received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.5.7 | ScalarcienaCesCfmGlobalLoopbackStatsRxTotalContentMismatchLBR | read-only | current | The total number of content mismatch loopback reply frames sent. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.5.8 | ScalarcienaCesCfmGlobalLoopbackStatsRxTotalUnexpectedLBR | read-only | current | The total number of unexpected loopback reply frames received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.5.9 | ScalarcienaCesCfmGlobalLoopbackStatsRxLBMInvalidFirstTLVOffset | read-only | current | The total number of loopback message frames received with invalid TLV offset. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.5.10 | ScalarcienaCesCfmGlobalLoopbackStatsRxLBRInvalidFirstTLVOffset | read-only | current | The total number of loopback reply frames received with invalid first TLV offset. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.5.11 | ScalarcienaCesCfmGlobalLoopbackStatsRxUnresolvedLBM | read-only | current | The total number of unresolved loopback message frames received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.5.12 | ScalarcienaCesCfmGlobalLoopbackStatsRxUnresolvedLBR | read-only | current | The total number of unresolved loopback reply frames received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.5.13 | ScalarcienaCesCfmGlobalLoopbackStatsRxTotalMalformedLBM | read-only | current | The total number of malformed loopback messages received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.6 | NodecienaCesCfmGlobalLinkTraceStats | |||
| 1.3.6.1.4.1.1271.2.3.4.1.1.6.1 | ScalarcienaCesCfmGlobalLinkTraceStatsTxTotalLTM | read-only | current | The number of linktrace messages transmitted. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.6.2 | ScalarcienaCesCfmGlobalLinkTraceStatsTxTotalLTR | read-only | current | The number of linktrace replies transmitted. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.6.3 | ScalarcienaCesCfmGlobalLinkTraceStatsRxTotalLTM | read-only | current | The number of linktrace messages received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.6.4 | ScalarcienaCesCfmGlobalLinkTraceStatsRxTotalLTR | read-only | current | The number of linktrace replies received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.6.5 | ScalarcienaCesCfmGlobalLinkTraceStatsRxTotalUnexpectedLTR | read-only | current | The number of unexpected linktrace replies received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.6.6 | ScalarcienaCesCfmGlobalLinkTraceStatsRxLTMInvalidFirstTLVOffset | read-only | current | The number of linktrace messages received with an invalid first TLV offset. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.6.7 | ScalarcienaCesCfmGlobalLinkTraceStatsRxLTRInvalidFirstTLVOffset | read-only | current | The number of linktrace replies received with an invalid first TLV offset. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.6.8 | ScalarcienaCesCfmGlobalLinkTraceStatsRxLTRInvalidRelayAction | read-only | current | The number of linktrace replies received with an invalid relay action. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.6.9 | ScalarcienaCesCfmGlobalLinkTraceStatsRxUnresolvedLTM | read-only | current | The number of linktrace messages received that could not be resolved. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.6.10 | ScalarcienaCesCfmGlobalLinkTraceStatsRxUnresolvedLTR | read-only | current | The number of linktrace replies received that could not be resolved. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.7 | NodecienaCesCfmGlobalDelayMeasurementStats | |||
| 1.3.6.1.4.1.1271.2.3.4.1.1.7.1 | ScalarcienaCesCfmGlobalDelayMeasurementStatsTxTotalDMM | read-only | current | The number of DMM frames transmitted. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.7.2 | ScalarcienaCesCfmGlobalDelayMeasurementStatsTxTotalDMR | read-only | current | The number of DMR frames transmitted. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.7.3 | ScalarcienaCesCfmGlobalDelayMeasurementStatsRxTotalDMM | read-only | current | The number of DMM frames received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.7.4 | ScalarcienaCesCfmGlobalDelayMeasurementStatsRxTotalDMR | read-only | current | The number of DMR frames received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.8 | NodecienaCesCfmGlobalLossMeasurementStats | |||
| 1.3.6.1.4.1.1271.2.3.4.1.1.8.1 | ScalarcienaCesCfmGlobalLossMeasurementStatsTxTotalLMM | read-only | current | The number of LMM frames transmitted. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.8.2 | ScalarcienaCesCfmGlobalLossMeasurementStatsTxTotalLMR | read-only | current | The number of LMR frames transmitted. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.8.3 | ScalarcienaCesCfmGlobalLossMeasurementStatsRxTotalLMM | read-only | current | The number of LMM frames received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.8.4 | ScalarcienaCesCfmGlobalLossMeasurementStatsRxTotalLMR | read-only | current | The number of LMR frames received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.9 | NodecienaCesCfmGlobalSyntheticLossMeasurementStats | |||
| 1.3.6.1.4.1.1271.2.3.4.1.1.9.1 | ScalarcienaCesCfmGlobalSyntheticLossMeasurementStatsTxTotalSLM | read-only | current | The total number of synthetic loss messages transmitted. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.9.2 | ScalarcienaCesCfmGlobalSyntheticLossMeasurementStatsTxTotalSLR | read-only | current | The total number of synthetic loss replies transmitted. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.9.3 | ScalarcienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalSLM | read-only | current | The total number of synthetic loss messages received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.9.4 | ScalarcienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalSLR | read-only | current | The total number of synthetic loss replies received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.9.5 | ScalarcienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalValidSLM | read-only | current | The total number of valid synthetic loss messages received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.9.6 | ScalarcienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalValidSLR | read-only | current | The total number of valid synthetic loss replies received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.9.7 | ScalarcienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalInvalidSLM | read-only | current | The total number of invalid synthetic loss messages received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.9.8 | ScalarcienaCesCfmGlobalSyntheticLossMeasurementStatsRxTotalInvalidSLR | read-only | current | The total number of invalid synthetic loss replies received. |
| 1.3.6.1.4.1.1271.2.3.4.1.1.9.9 | ScalarcienaCesCfmGlobalSyntheticLossMeasurementStatsRxDropSLM | read-only | current | The total number of synthetic loss messages dropped due to lack of responder resources. |
| 1.3.6.1.4.1.1271.2.3.4.1.2 | NodecienaCesCfmServiceStats | |||
| 1.3.6.1.4.1.1271.2.3.4.1.2.1 | TablecienaCesCfmServiceStatsTable | not-accessible | current | The (conceptual) table listing the statistics for a given CFM service. |
| 1.3.6.1.4.1.1271.2.3.4.1.2.1.1 | RowcienaCesCfmServiceStatsEntry | not-accessible | current | An entry (conceptual row) in the CienaCesCfmServiceTable. |
| 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.1 | ColumncienaCesCfmServiceStatsTotalTx | read-only | current | The total CFM frames sent for the service. |
| 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.2 | ColumncienaCesCfmServiceStatsTotalRx | read-only | current | The total CFM frames received for the service. |
| 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.3 | ColumncienaCesCfmServiceStatsTotalTxLTM | read-only | current | The total number of linktrace messages transmitted for the CFM service. |
| 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.4 | ColumncienaCesCfmServiceStatsTotalTxLTR | read-only | current | The total number of linktrace replies transmitted for the CFM service. |
| 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.5 | ColumncienaCesCfmServiceStatsTotalRxLTM | read-only | current | The total number of link trace messages received for the CFM service. |
| 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.6 | ColumncienaCesCfmServiceStatsTotalRxLTR | read-only | current | The total number of linktrace replies received for the CFM service. |
| 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.7 | ColumncienaCesCfmServiceStatsTotalRxUnexpectedLTR | read-only | current | The total number of unexpected linktrace replies received for the CFM service. |
| 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.8 | ColumncienaCesCfmServiceStatsTotalTxLBM | read-only | current | The total number of loopback messages transmitted for the CFM service. |
| 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.9 | ColumncienaCesCfmServiceStatsTotalTxLBR | read-only | current | The total number of loopback replies transmitted for the CFM service. |
| 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.10 | ColumncienaCesCfmServiceStatsTotalRxLBM | read-only | current | The total number of loopback messages received for the CFM service. |
| 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.11 | ColumncienaCesCfmServiceStatsTotalRxInorderLBR | read-only | current | The total number of in-order loopback replies received. |
| 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.12 | ColumncienaCesCfmServiceStatsTotalRxOutOforderLBR | read-only | current | The total number of out-of-order loopback replies received. |
| 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.13 | ColumncienaCesCfmServiceStatsTotalRxContentMismatchLBR | read-only | current | The total number of content mismatched loopback replies received. |
| 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.14 | ColumncienaCesCfmServiceStatsTotalRxUnexpectedLBR | read-only | current | The total number of unexpectecd loopback replies received. |
| 1.3.6.1.4.1.1271.2.3.4.1.2.1.1.15 | ColumncienaCesCfmServiceStatsClear | read-write | current | To clear statistics for a given service, set this object to clear(1). During GET this object returns none(0) |
| 1.3.6.1.4.1.1271.2.3.4.1.3 | NodecienaCesCfmMepStats | |||
| 1.3.6.1.4.1.1271.2.3.4.1.3.1 | TablecienaCesCfmMepStatsTable | not-accessible | current | The (conceptual) table listing the configuration parameters for the CFM MEP table. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1 | RowcienaCesCfmMepStatsEntry | not-accessible | current | An entry (conceptual row) in the cienaCesCfmMepStatsTable. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.1 | ColumncienaCesCfmMepInterfaceType | read-only | current | This object is used as the index in the table and indicates the MEP interface for the given service. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.2 | ColumncienaCesCfmMepInterfaceIndex | read-only | current | This object is used as the index in the table and indicates the MEP interface index for the given service. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.3 | ColumncienaCesCfmMepStatsTxTotalCCM | read-only | current | The total number of CCM messages transmitted by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.4 | ColumncienaCesCfmMepStatsRxTotalCCM | read-only | current | The total number of CCM messages received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.5 | ColumncienaCesCfmMepStatsTxLoopbackMessages | read-only | current | The total number of loopback messages transmitted by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.6 | ColumncienaCesCfmMepStatsTxLoopbackReply | read-only | current | The total number of loopback replies transmitted by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.7 | ColumncienaCesCfmMepStatsRxLoopbackMessages | read-only | current | The total number of loopback messages received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.8 | ColumncienaCesCfmMepStatsRxInorderLoopbackReply | read-only | current | The total number of in-order loopback replies received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.9 | ColumncienaCesCfmMepStatsRxOutoforderLoopbackReply | read-only | current | The total number of out-of-order loopback replies received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.10 | ColumncienaCesCfmMepStatsRxContentMismatchLoopbackReply | read-only | current | The total number of content mismatched loopback replies received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.11 | ColumncienaCesCfmMepStatsRxUnexpectedLoopbackReply | read-only | current | The total number of unexpected loopback replies received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.12 | ColumncienaCesCfmMepStatsTxLinktraceMessage | read-only | current | The total number of linktrace messages transmitted by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.13 | ColumncienaCesCfmMepStatsTxLinktraceReply | read-only | current | The total number of linktrace replies transmitted by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.14 | ColumncienaCesCfmMepStatsRxLinktraceMessage | read-only | current | The total number of linktrace messages received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.15 | ColumncienaCesCfmMepStatsRxLinktraceReply | read-only | current | The total number of linktrace replies received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.16 | ColumncienaCesCfmMepStatsRxUnexpectedLinktraceReply | read-only | current | The total number of unexpected linktrace replies received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.17 | ColumncienaCesCfmMepStatsTxDelayMeasurementMessage | read-only | current | The total number of DMM messages transmitted by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.18 | ColumncienaCesCfmMepStatsTxDelayMeasurementReply | read-only | current | The total number of DMM replies transmitted by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.19 | ColumncienaCesCfmMepStatsRxDelayMeasurementMessage | read-only | current | The total number of DMM messages received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.20 | ColumncienaCesCfmMepStatsRxDelayMeasurementReply | read-only | current | The total number of DMM replies received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.21 | ColumncienaCesCfmMepStatsTxLossMeasurementMessage | read-only | current | The total number of LMM messages transmitted by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.22 | ColumncienaCesCfmMepStatsTxLossMeasurementReply | read-only | current | The total number of LMM replies transmitted by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.23 | ColumncienaCesCfmMepStatsRxLossMeasurementMessage | read-only | current | The total number of LMM messages received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.24 | ColumncienaCesCfmMepStatsRxLossMeasurementReply | read-only | current | The total number of LMM replies received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.25 | ColumncienaCesCfmMepStatsLastLBMTargetRemoteMepId | read-only | current | This object indicates the remote MEP ID of the last loopback message. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.26 | ColumncienaCesCfmMepStatsLastLBMTargetMacAddress | read-only | current | This object indicates the target MAC address for the last loopback message. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.27 | ColumncienaCesCfmMepStatsLastLBMPriority | read-only | current | This object indicates the last loopback message priority. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.28 | ColumncienaCesCfmMepStatsLastLBMCount | read-only | current | This object indicates the last loopback message count. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.29 | ColumncienaCesCfmMepStatsLastLBMFirstSeqNum | read-only | current | This object indicates the last loopback message first sequence number. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.30 | ColumncienaCesCfmMepStatsLastLTMTargetRemoteMepId | read-only | current | This object indicates the last linktrace message target remote MEP ID. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.31 | ColumncienaCesCfmMepStatsLastLTMTargetMacAddress | read-only | current | This object indicates the target MAC address of the the last linktrace message. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.32 | ColumncienaCesCfmMepStatsLastLTMPriority | read-only | current | This object indicates the last linktrace message priority of the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.33 | ColumncienaCesCfmMepStatsLastLTMSeqNum | read-only | current | This object indicates the last linktrace message sequence number of the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.34 | ColumncienaCesCfmMepStatsLastLTMInitialTTL | read-only | current | This object indicates the last linktrace message initial TTL of the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.35 | ColumncienaCesCfmMepStatsLastDMMTargetRemoteMepId | read-only | current | This object indicates the last DMM target remote MEP ID for the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.36 | ColumncienaCesCfmMepStatsLastDMMTargetMacAddress | read-only | current | This object indicates the last DMM target MAC address for the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.37 | ColumncienaCesCfmMepStatsLastDMMPriority | read-only | current | This object indicates the last DMM priority for the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.38 | ColumncienaCesCfmMepStatsLastDMMRepeatInterval | read-only | current | This object indicates the last DMM repeat interval for the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.39 | ColumncienaCesCfmMepStatsLastDMMNumOfDmmToSend | read-only | current | This object indicates the number of DMMs to send for the last DMM for the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.40 | ColumncienaCesCfmMepStatsLastLMMTargetRemoteMepId | read-only | current | This object indicates the last LMM target remote MEP ID for the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.41 | ColumncienaCesCfmMepStatsLastLMMTargetMacAddress | read-only | current | This object indicates the last LMM target MAC Address for the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.42 | ColumncienaCesCfmMepStatsLastLMMPriority | read-only | current | This object indicates the last LMM priority for the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.43 | ColumncienaCesCfmMepStatsLastLMMRepeatInterval | read-only | current | This object indicates the last LMM repeat interval for the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.44 | ColumncienaCesCfmMepStatsLastLMMNumOfLmmToSend | read-only | current | This object indicates the number of LMMs to send for the last LMM for the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.45 | ColumncienaCesCfmMepStatsNextLBMSeqNumber | read-only | current | This object indicates the next LBM sequence number received on the given service and port. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.46 | ColumncienaCesCfmMepStatsNextLTMSeqNumber | read-only | current | This object indicates the next LTM sequence number received on the given service and port. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.47 | ColumncienaCesCfmMepStatsTxSyntheticLossMeasurementMessage | read-only | current | The total number of synthetic loss messages transmitted by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.48 | ColumncienaCesCfmMepStatsTxSyntheticLossMeasurementReply | read-only | current | The total number of synthetic loss replies transmitted by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.49 | ColumncienaCesCfmMepStatsRxSyntheticLossMeasurementMessage | read-only | current | The total number of synthetic loss messages received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.50 | ColumncienaCesCfmMepStatsRxSyntheticLossMeasurementReply | read-only | current | The total number of synthetic loss replies received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.51 | ColumncienaCesCfmMepStatsRxValidSyntheticLossMeasurementMessage | read-only | current | The total number valid of synthetic loss messages received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.52 | ColumncienaCesCfmMepStatsRxValidSyntheticLossMeasurementReply | read-only | current | The total number valid of synthetic loss replies received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.53 | ColumncienaCesCfmMepStatsRxInvalidSyntheticLossMeasurementMessage | read-only | current | The total number invalid of synthetic loss messages received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.54 | ColumncienaCesCfmMepStatsRxInvalidSyntheticLossMeasurementReply | read-only | current | The total number invalid of synthetic loss replies received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.55 | ColumncienaCesCfmMepStatsRxCCMWithErrorCCMFault | read-only | current | The total number of CCMs with Error CCM fault received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.56 | ColumncienaCesCfmMepStatsRxCCMWithXCONFault | read-only | current | The total number of CCMs with XCON fault received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.57 | ColumncienaCesCfmMepStatsRxCCMWithRMEPLOCFault | read-only | current | The total number of CCMs with RMEP LOC fault received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.58 | ColumncienaCesCfmMepStatsRxCCMWithRDI0 | read-only | current | The total number of CCMs with RDI bit 0 received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.59 | ColumncienaCesCfmMepStatsRxCCMWithRDI1 | read-only | current | The total number of CCMs with RDI bit set received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.60 | ColumncienaCesCfmMepStatsRxCCMWithSequenceNumberMismatch | read-only | current | The total number of CCMs with sequence number mismatch received by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.61 | ColumncienaCesCfmMepStatsRxCCMDroppedWithMalformedTlv | read-only | current | The total number of CCMs received by the CFM MEP which were dropped because of malformed TLV. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.1.1.62 | ColumncienaCesCfmMepStatsToTxLoopbackMessages | read-only | current | The total number of loopback messages left to be transmitted by the CFM MEP. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.2 | TablecienaCesCfmRemoteMepStatsTable | not-accessible | current | The (conceptual) table listing the configuration parameters for the CFM remote MEP table. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.2.1 | RowcienaCesCfmRemoteMepStatsEntry | not-accessible | current | An entry (conceptual row) in the cienaCesCfmMepStatsTable. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.2.1.1 | ColumncienaCesCfmRemoteMepStatsRxTotalCCM | read-only | current | This object is used to show the number of MEP CCM frames received. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.2.1.2 | ColumncienaCesCfmRemoteMepStatsLastSeqNum | read-only | current | This object is used to show the last sequence number. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.2.1.3 | ColumncienaCesCfmRemoteMepStatsCCMSeqErrors | read-only | current | This object is used to show the number of MEP CCM frames sequence errors. |
| 1.3.6.1.4.1.1271.2.3.4.1.3.2.1.4 | ColumncienaCesCfmRemoteMepStatsClear | read-write | current | Setting this object to clear(1) resets the statistics for the remote MEP for this service. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CfmDisplayString | OCTET STRING (SIZE(1..2)) | current | Specifies the CFM display string. |
| CfmFrameLossRatio | Unsigned32 (0..1000000) | current | Denotes Frame Loss Ratio in accuracy of four digits. So a value of 1000 here would mean 0.1% loss. |
| CienaCesCfmInterfaceType | INTEGER { subport(1), encapPbt(2), decapPbt(3), pbtService(4), mplsVc(5), unknown(99) } | current | Interface type of the PM instance. |
| EthType | OCTET STRING (SIZE(1..2)) | current | Specifies the Ethertype. |