MIB Viewer

CIENA-CES-EXT-LAG-MIB

59 objects
This MIB module is an extension to the ieee8023-lag-mib. This MIB defines the mgmt objects for the creation and deletion of LAGs.
OIDNameAccessStatusDescription
1.3.6.1.4.1.1271.2.1.3IdentitycienaCesExtLagMIBThis MIB module is an extension to the ieee8023-lag-mib. This MIB defines the mgmt objects for the creation and deletion of LAGs.
1.3.6.1.4.1.1271.2.1.3.1NodecienaCesExtLagMIBObjects
1.3.6.1.4.1.1271.2.1.3.1.1NodecienaCesExtLag
1.3.6.1.4.1.1271.2.1.3.1.1.1ScalarcienaCesMaxLagsread-onlycurrentThe maximum number of LAGs that this device supports.
1.3.6.1.4.1.1271.2.1.3.1.1.2ScalarcienaCesNumLagsread-onlycurrentThe current number of LAGs that are configured on this device.
1.3.6.1.4.1.1271.2.1.3.1.1.3TablecienaCesExtLagTablenot-accessiblecurrentThe (conceptual) table listing all the LAGs.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1RowcienaCesExtLagEntrynot-accessiblecurrentAn entry (conceptual row) in the cienaCesExtLagTable.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.1ColumncienaCesExtAggIdread-onlycurrentObject that specifies a unique entry in the cienaCesExtLagTable. A management station wishing to create a LAG should use a pseudo-random value for this object …
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.2ColumncienaCesExtAggNameread-onlycurrentThe name assigned to this LAG by the management station. This object can only be set while creating the LAG. The LAG cannot be renamed once it is created.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.3ColumncienaCesExtAggIndexread-onlycurrentThe unique identifier allocated to this LAG by the local system. This attribute identifies an LAG instance among the subordinate managed objects of the contain…
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.4ColumncienaCesExtAggModeread-onlycurrentThis object specifies the mode in which the given aggregation is operating.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.5ColumncienaCesExtLagProtectionRevertStateread-onlycurrentThis object specifies that if the primary port goes from operationally disabled to operationally enabled it shall become active, and one of the secondary ports…
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.6ColumncienaCesExtLagProtectionRevertTimerread-onlycurrentThis object specifies the revert protection timer value.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.7ColumncienaCesExtAggTotalAddedPortsread-onlycurrentThis object specifies the total number of member ports present in the LAG group.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.8ColumncienaCesExtAggTotalProtectionPortsread-onlycurrentThis object specifies the total number of protection member ports present in the LAG group.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.9ColumncienaCesExtLagProtectionModeread-onlycurrentThis object specifies the LACP protection-mode in which the given aggregation is operating.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.10ColumncienaCesExtAggICLread-onlycurrentThis object specifies the inter-chassis link name that the multi-chassis LAG is using.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.11ColumncienaCesExtAggRoleread-onlycurrentThis object specifies if the MC-LAG node is primary or backup
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.12ColumncienaCesExtAggRgNodeIdread-onlycurrentThis object specifies the MC-LAG RG node ID.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.13ColumncienaCesExtAggRgDynamicPriorityread-onlycurrentThis object specifies the MC-LAG RG node dynamically assigned priority.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.14ColumncienaCesExtAggRgOperKeyread-onlycurrentThis object specifies the MC-LAG RG node operational key.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.15ColumncienaCesExtAggRedundancyStateread-onlycurrentThis object specifies the oper state of the MC-LAG node
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.16ColumncienaCesExtAggConnectStateread-onlycurrentThis object specifies the Connect State of the MC-LAG node.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.17ColumncienaCesExtAggRgMismatchStatusread-onlycurrentThis object specifies the Mismatch Status of the MC-LAG node.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.18ColumncienaCesExtAggPeerSystemMacread-onlycurrentThis object specifies the MC-LAG peer node system MAC address.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.19ColumncienaCesExtAggPeerRgNodeIdread-onlycurrentThis object specifies the MC-LAG peer RG node ID.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.20ColumncienaCesExtAggPeerRgDynamicPriorityread-onlycurrentThis object specifies the MC-LAG peer RG node dynamically assigned priority.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.21ColumncienaCesExtAggPeerRgOperKeyread-onlycurrentThis object specifies the MC-LAG peer RG node operational key.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.22ColumncienaCesExtAggPeerRgNumAddedPortsread-onlycurrentThis object specifies number of ports added to the MC-LAG peer RG node.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.23ColumncienaCesExtAggPeerRgNumAvailablePortsread-onlycurrentThis object specifies number of ports available to the MC-LAG peer RG node.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.24ColumncienaCesExtAggDisconnectRxread-onlycurrentThis object specifies the number of Disconnect messages received by the MC-LAG node.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.25ColumncienaCesExtAggDisconnectTxread-onlycurrentThis object specifies the number of Disconnect messages transmitted by the MC-LAG node.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.26ColumncienaCesExtAggConfigMismatchRxread-onlycurrentThis object specifies the number of mismatch config messages received by the MC-LAG node.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.27ColumncienaCesExtAggKeyMismatchCountread-onlycurrentThis object specifies the number of messages received with mismatching key by the MC-LAG node.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.28ColumncienaCesExtAggOutOfSequenceRxread-onlycurrentThis object specifies the number of out of sequence messages received by the MC-LAG node.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.29ColumncienaCesExtAggPeerUnreachableCountread-onlycurrentThis object specifies the number of times peer was unreachable.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.30ColumncienaCesExtAggUnknownRxread-onlycurrentThis object specifies the number unknown messages received by the MC-LAG node.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.31ColumncienaCesExtAggTotalRxread-onlycurrentThis object specifies the total number of messages received by the MC-LAG node.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.32ColumncienaCesExtAggTotalTxread-onlycurrentThis object specifies the total number of messages transmitted by MC-LAG node.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.33ColumncienaCesExtAggTotalDownTimeread-onlycurrentThis object specifies total time for which the MC-LAG node has been operationally down.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.34ColumncienaCesExtAggUpTimeread-onlycurrentThis object specifies time for which the MC-LAG node has been operationally up.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.35ColumncienaCesExtAggTimeInProtectStateread-onlycurrentThis object specifies time for which the MC-LAG node has been in protection state.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.36ColumncienaCesExtAggLastTimeProtectedread-onlycurrentThis object specifies time of day of the last MC-LAG protection switching.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.37ColumncienaCesExtAggNumberOfSwitchoversread-onlycurrentThis object specifies the number of MC-LAG protection switching.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.38ColumncienaCesExtAggMultiChassisread-onlycurrentThis object specifies if the LAG is an MC-LAG
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.39ColumncienaCesExtAggMinimumLinkAggregationread-onlycurrentThis object enables minimum link aggregation mode for the LAG group
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.40ColumncienaCesExtAggMinimumLinkThresholdread-onlycurrentThis object specifies minimum link threshold value for minimum link aggregation mode.
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.41ColumncienaCesExtAggAdminStateread-onlycurrentThis object displays current value of Admin state of the LAG group
1.3.6.1.4.1.1271.2.1.3.1.1.3.1.42ColumncienaCesExtAggOperStateread-onlycurrentThis object displays current value of Oper State of the LAG group
1.3.6.1.4.1.1271.2.1.3.1.1.4TablecienaCesLagProtectionTablenot-accessiblecurrentThe (conceptual) table listing the protection ports for each aggregation.
1.3.6.1.4.1.1271.2.1.3.1.1.4.1RowcienaCesLagProtectionEntrynot-accessiblecurrentAn entry (conceptual row) in the cienaCesLagProtectionTable.
1.3.6.1.4.1.1271.2.1.3.1.1.4.1.1ColumncienaCesLagProtectionPortread-onlycurrentThis object specifies the protection port number. It is also used as an index in the table.
1.3.6.1.4.1.1271.2.1.3.1.1.5ScalarcienaCesExtAggMarkerTimeoutread-onlycurrentThis object specifies time for which Marker PDUs are sent periodically.
1.3.6.1.4.1.1271.2.1.3.2NodecienaCesExtLagMIBConformance
1.3.6.1.4.1.1271.2.1.3.2.1NodecienaCesExtLagMIBCompliances
1.3.6.1.4.1.1271.2.1.3.2.2NodecienaCesExtLagMIBGroups
1.3.6.1.4.1.1271.2.2.21NodecienaCesExtLagMIBNotificationPrefix
1.3.6.1.4.1.1271.2.2.21.0NodecienaCesExtLagMIBNotifications
1.3.6.1.4.1.1271.2.2.21.0.1NotificationcienaCesExtLagMclagStateChangecurrentThis notification is sent when MC-LAG oper state changes. Var binding cienaCesExtAggId represents the MC-LAG PGID.