CIENA-CES-OAM-MIB
93 objects
This module defines the EFM OAM statistics objects and also the objects required for EFM OAM related notifications.
Imported Objects
| CIENA-GLOBAL-MIB | cienaGlobalMacAddress cienaGlobalSeverity |
| CIENA-SMI | cienaCesNotifications cienaCesStatistics |
| CIENA-TC | CienaStatsClear |
| SNMPv2-SMI | Counter32 Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1271.2.2.15 | NodecienaCesOamNotifMIBNotificationPrefix | |||
| 1.3.6.1.4.1.1271.2.2.15.0 | NodecienaCesOamNotifMIBNotification | |||
| 1.3.6.1.4.1.1271.2.2.15.0.1 | NotificationcienaCesOamLinkEventTrap | current | A cienaCesOamLinkEventTrap notification is sent whenever a local or remote link event is detected and recorded in the cienaCesOamEventLogTable. To enable the d… | |
| 1.3.6.1.4.1.1271.2.3.5 | IdentitycienaCesOamMibModule | This module defines the EFM OAM statistics objects and also the objects required for EFM OAM related notifications. | ||
| 1.3.6.1.4.1.1271.2.3.5.1 | NodecienaCesOamMIB | |||
| 1.3.6.1.4.1.1271.2.3.5.1.1 | NodecienaCesOamStatistics | |||
| 1.3.6.1.4.1.1271.2.3.5.1.1.1 | TablecienaCesOamStatsTable | not-accessible | current | Statistics for the OAM function on a particular Ethernet-like interface. |
| 1.3.6.1.4.1.1271.2.3.5.1.1.1.1 | RowcienaCesOamStatsEntry | not-accessible | current | An entry in the table, containing statistical information on the Ethernet OAM function for a single Ethernet-like interface. |
| 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.1 | ColumncienaCesOamInformationTx | read-only | current | A count of the number of Information OAMPDUs transmitted on this interface. An Information OAMPDU is indicated by a valid frame with (1) destination MAC addres… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.2 | ColumncienaCesOamInformationRx | read-only | current | A count of the number of Information OAMPDUs received on this interface. An Information OAMPDU is indicated by a valid frame with (1) destination MAC address e… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.3 | ColumncienaCesOamUniqueEventNotificationTx | read-only | current | A count of the number of unique Event OAMPDUs transmitted on this interface. Event notifications may be sent in duplicate to increase the probability of succes… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.4 | ColumncienaCesOamUniqueEventNotificationRx | read-only | current | A count of the number of unique Event OAMPDUs received on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of su… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.5 | ColumncienaCesOamLoopbackControlTx | read-only | current | A count of the number of Loopback Control OAMPDUs transmitted on this interface. An Loopback Control OAMPDU is indicated by a valid frame with (1) destination … |
| 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.6 | ColumncienaCesOamLoopbackControlRx | read-only | current | A count of the number of Loopback Control OAMPDUs transmitted on this interface. An Loopback Control OAMPDU is indicated by a valid frame with (1) destination … |
| 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.7 | ColumncienaCesOamVariableRequestTx | read-only | current | A count of the number of Variable Request OAMPDUs transmitted on this interface. An Variable Request OAMPDU is indicated by a valid frame with (1) destination … |
| 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.8 | ColumncienaCesOamVariableRequestRx | read-only | current | A count of the number of Variable Request OAMPDUs received on this interface. An Variable Request OAMPDU is indicated by a valid frame with (1) destination MAC… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.9 | ColumncienaCesOamVariableResponseTx | read-only | current | A count of the number of Variable Response OAMPDUs transmitted on this interface. An Variable Response OAMPDU is indicated by a valid frame with (1) destinatio… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.10 | ColumncienaCesOamVariableResponseRx | read-only | current | A count of the number of Variable Response OAMPDUs received on this interface. An Variable Response OAMPDU is indicated by a valid frame with (1) destination M… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.11 | ColumncienaCesOamOrgSpecificTx | read-only | current | A count of the number of Organization Specific OAMPDUs transmitted on this interface. An Organization Specific OAMPDU is indicated by a valid frame with (1) de… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.12 | ColumncienaCesOamOrgSpecificRx | read-only | current | A count of the number of Organization Specific OAMPDUs received on this interface. An Organization Specific OAMPDU is indicated by a valid frame with (1) desti… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.13 | ColumncienaCesOamUnsupportedCodesTx | read-only | current | A count of the number of OAMPDUs transmitted on this interface with an unsupported op-code. An unsupported op-code OAMPDU is indicated by a valid frame with (1… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.14 | ColumncienaCesOamUnsupportedCodesRx | read-only | current | A count of the number of OAMPDUs received on this interface with an unsupported op-code. An unsupported op-code OAMPDU is indicated by a valid frame with (1) d… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.15 | ColumncienaCesOamframesLostDueToOam | read-only | current | A count of the number of frames that were dropped by the OAM multiplexer. Since the OAM multiplexer has multiple inputs and a single output, there may be cases… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.16 | ColumncienaCesOamStatsPort | not-accessible | current | An Ethernet port on the switch. |
| 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.17 | ColumncienaCesOamDuplicateEventNotificationTx | read-only | current | A count of the number of duplicate Event OAMPDUs transmitted on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.18 | ColumncienaCesOamDuplicateEventNotificationRx | read-only | current | A count of the number of duplicate Event OAMPDUs received on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2 | TablecienaCesOamEventLogTable | not-accessible | current | This table records a history of the events that have occurred at the Ethernet OAM level. These events can include locally detected events, which may result in … |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2.1 | RowcienaCesOamEventLogEntry | not-accessible | current | An entry in the cienaCesOamEventLogTable. |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2.1.1 | ColumncienaCesOamEventLogPort | not-accessible | current | An Ethernet port on the switch. |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2.1.2 | ColumncienaCesOamEventLogIndex | not-accessible | current | An arbitrary integer for identifying individual events within the event log. |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2.1.3 | ColumncienaCesOamEventLogTimestamp | read-only | current | The value of sysUpTime at the time of the logged event. For locally generated events, the time of the event can be accurately retrieved from sysUpTime. For rem… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2.1.4 | ColumncienaCesOamEventLogOui | read-only | current | The OUI of the entity defining the object type. All IEEE 802.3 defined events (as appearing in [802.3ah] except for the Organizationally Unique Event TLVs) use… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2.1.5 | ColumncienaCesOamEventLogType | read-only | current | The type of event that generated this entry in the event log. When the OUI is the IEEE 802.3 OUI of 0x0180C2, the following event types are defined: erroredSym… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2.1.6 | ColumncienaCesOamEventLogLocation | read-only | current | Whether this event occurred locally, or was received from the OAM peer via Ethernet OAM. |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2.1.7 | ColumncienaCesOamEventLogWindowHi | read-only | current | If the event represents a threshold crossing event, the two objects cienaCesOamEventWindowHi and cienaCesOamEventWindowLo form an unsigned 64-bit integer yield… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2.1.8 | ColumncienaCesOamEventLogWindowLo | read-only | current | If the event represents a threshold crossing event, the two objects cienaCesOamEventWindowHi and cienaCesOamEventWindowLo form an unsigned 64-bit integer yield… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2.1.9 | ColumncienaCesOamEventLogThresholdHi | read-only | current | If the event represents a threshold crossing event, the two objects cienaCesOamEventThresholdHi and cienaCesOamEventThresholdLo form an unsigned 64-bit integer… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2.1.10 | ColumncienaCesOamEventLogThresholdLo | read-only | current | If the event represents a threshold crossing event, the two objects cienaCesOamEventThresholdHi and cienaCesOamEventThresholdLo form an unsigned 64-bit integer… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2.1.11 | ColumncienaCesOamEventLogValue | read-only | current | If the event represents a threshold crossing event, this value indicates the value of the parameter within the given window that generated this event (e.g., 11… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2.1.12 | ColumncienaCesOamEventLogRunningTotal | read-only | current | This value represents the total number of times this occurrence has happened since the last reset (e.g., 3253, when 3253 symbol errors have occurred since the … |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2.1.13 | ColumncienaCesOamEventLogEventTotal | read-only | current | This value represents the total number of times one or more of these occurrences have resulted in an event (e.g., 51 when 3253 symbol errors have occurred sinc… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2.1.14 | ColumncienaCesOamEventNotifChassisIndex | accessible-for-notify | current | This object indicates the chassis index for the port used for trap definition. |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2.1.15 | ColumncienaCesOamEventNotifShelfIndex | accessible-for-notify | current | This object indicates the shelf index for the port used for trap definition. |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2.1.16 | ColumncienaCesOamEventNotifSlotIndex | accessible-for-notify | current | This object indicates the slot index for the port used for trap definition. |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2.1.17 | ColumncienaCesOamEventNotifPortNumber | accessible-for-notify | current | This object indicates the port number for the corresponding PGID used for trap definition. |
| 1.3.6.1.4.1.1271.2.3.5.1.1.2.1.18 | ColumncienaCesOamEventNotifChannelNumber | accessible-for-notify | current | This object indicates the channel number for the corresponding PGID used for trap definition. The value 0 is used if port of concern is not channelized. |
| 1.3.6.1.4.1.1271.2.3.5.1.1.3 | ScalarcienaCesOamStatsClear | read-write | current | Setting this object to 'true' causes the values of all objects maintained within the cienaCesOamStatsTable to reset to the value of zero. When read, this objec… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.4 | TablecienaCesOamTable | not-accessible | current | Primary controls and status for the OAM capabilities of an Ethernet like interface. There is one row in this table for each Ethernet like interface in the syst… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.4.1 | RowcienaCesOamEntry | not-accessible | current | An entry in the table. Contains an Ethernet like interface in the system that supports the Ethernet OAM functions defined in [802.3ah]. |
| 1.3.6.1.4.1.1271.2.3.5.1.1.4.1.1 | ColumncienaCesOamPort | not-accessible | current | An Ethernet port on the switch. |
| 1.3.6.1.4.1.1271.2.3.5.1.1.4.1.2 | ColumncienaCesOamAdminState | read-only | current | This object is used to provision the default administrative OAM mode for this interface. This object represents the desired state of OAM for this interface. Th… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.4.1.3 | ColumncienaCesOamOperStatus | read-only | current | At initialization and failure conditions, two OAM entities on the same full-duplex Ethernet link begin a discovery phase to determine what OAM capabilities may… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.4.1.4 | ColumncienaCesOamMode | read-only | current | This object indicates the mode of OAM operation for this Ethernet like interface. OAM on Ethernet interfaces may be in 'active' mode or 'passive' mode. These t… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.4.1.5 | ColumncienaCesMaxOamPduSize | read-only | current | The largest OAMPDU that the OAM entity supports. OAM entities exchange maximum OAMPDU sizes and negotiate to use the smaller of the two maximum OAMPDU sizes be… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.4.1.6 | ColumncienaCesOamConfigRevision | read-only | current | The configuration revision of the OAM entity as reflected in the latest OAMPDU sent by the OAM entity. The configuration revision is used by OAM entities to in… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.4.1.7 | ColumncienaCesOamFunctionsSupported | read-only | current | The OAM functions supported on this Ethernet like interface. OAM consists of separate functional sets beyond the basic discovery process which is always requir… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.4.1.8 | ColumncienaCesOamPduTimer | read-only | current | The time in milliseconds between Information OAMPDUs being transmitted via the Ethernet port. |
| 1.3.6.1.4.1.1271.2.3.5.1.1.4.1.9 | ColumncienaCesOamLinkLostTimer | read-only | current | The time in milliseconds to wait for an Information OAMPDU via the Ethernet port, from a peer, before declaring the link lost. |
| 1.3.6.1.4.1.1271.2.3.5.1.1.5 | TablecienaCesOamPeerTable | not-accessible | current | Information about the OAM peer for a particular Ethernet like interface. OAM entities communicate with a single OAM peer entity on full-duplex Ethernet links o… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.5.1 | RowcienaCesOamPeerEntry | not-accessible | current | An entry in the table, containing information on the peer OAM entity for a single Ethernet like interface. Note that there is at most one OAM peer for each Eth… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.5.1.1 | ColumncienaCesOamLocalPort | not-accessible | current | An Ethernet port on the local switch. |
| 1.3.6.1.4.1.1271.2.3.5.1.1.5.1.2 | ColumncienaCesOamPeerStatus | read-only | current | This object indicates whether the information in this row should be considered valid. When active(1), the information is valid and represents the current peer … |
| 1.3.6.1.4.1.1271.2.3.5.1.1.5.1.3 | ColumncienaCesOamPeerMacAddress | read-only | current | The MAC address of the peer OAM entity. The MAC address is derived from the most recently received OAMPDU. This value is initialized to all zeros (0x0000000000… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.5.1.4 | ColumncienaCesOamPeerVendorOui | read-only | current | The OUI of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The OUI can be used to identify the vendor of the … |
| 1.3.6.1.4.1.1271.2.3.5.1.1.5.1.5 | ColumncienaCesOamPeerVendorInfo | read-only | current | The Vendor Info of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The vendor information field is within the… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.5.1.6 | ColumncienaCesOamPeerMode | read-only | current | The mode of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The mode of the peer can be determined from the C… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.5.1.7 | ColumncienaCesOamPeerMaxOamPduSize | read-only | current | The maximum size of OAMPDU supported by the peer as reflected in the latest Information OAMPDU received with a Local Information TLV. Ethernet OAM on this inte… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.5.1.8 | ColumncienaCesOamPeerConfigRevision | read-only | current | The configuration revision of the OAM peer as reflected in the latest OAMPDU. This attribute is changed by the peer whenever it has a local configuration chang… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.5.1.9 | ColumncienaCesOamPeerFunctionsSupported | read-only | current | The OAM functions supported on this Ethernet like interface. OAM consists of separate functionality sets above the basic discovery process. This value indicate… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.6 | TablecienaCesOamLoopbackTable | not-accessible | current | This table contains methods to control the loopback state of the local link as well as indicating the status of the loopback function. Loopback can be used to … |
| 1.3.6.1.4.1.1271.2.3.5.1.1.6.1 | RowcienaCesOamLoopbackEntry | not-accessible | current | An entry in the table, containing information on the loopback status for a single Ethernet like interface. There is an entry in this table for every Ethernet l… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.6.1.1 | ColumncienaCesOamLoopbackPort | not-accessible | current | An Ethernet port on the switch. |
| 1.3.6.1.4.1.1271.2.3.5.1.1.6.1.2 | ColumncienaCesOamLoopbackCommand | read-only | current | This attribute initiates or terminates remote loopback with an OAM peer. Value startRemoteLoopback(2) of this attribute indicates the local OAM client to send … |
| 1.3.6.1.4.1.1271.2.3.5.1.1.6.1.3 | ColumncienaCesOamLoopbackStatus | read-only | current | The loopback status of the OAM entity. This status is determined by a combination of the local parser and multiplexer states, the remote parser and multiplexer… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.6.1.4 | ColumncienaCesOamLoopbackIgnoreRx | read-only | current | Since OAM loopback is a disruptive operation (user traffic does not pass), this attribute provides a mechanism to provide controls over whether received OAM lo… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.7 | ScalarcienaCesOamSystemEnableDisable | read-only | current | This object indicates the administratively configurable state of the OAM on the switch. |
| 1.3.6.1.4.1.1271.2.3.5.1.1.8 | TablecienaCesOamEventConfigTable | not-accessible | current | Ethernet OAM includes the ability to generate and receive event notifications to indicate various link problems. This table contains the mechanisms to configur… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.8.1 | RowcienaCesOamEventConfigEntry | not-accessible | current | Event configuration information is available for every Ethernet like interface that supports OAM and the event function of OAM as indicated in the cienaCesOamF… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.8.1.1 | ColumncienaCesOamEventPort | not-accessible | current | An Ethernet port on the switch |
| 1.3.6.1.4.1.1271.2.3.5.1.1.8.1.2 | ColumncienaCesOamErrFramePeriodWindow | read-only | current | The number of frames over which the threshold is defined. The default value of the window is the number of minimum size Ethernet frames that can be received ov… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.8.1.3 | ColumncienaCesOamErrFramePeriodThreshold | read-only | current | The number of frame errors that must occur for this event to be triggered. The default value is one frame error. If cienaCesOamErrFramePeriodThreshold frame er… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.8.1.4 | ColumncienaCesOamErrFramePeriodEvNotifEnable | read-only | current | Indicates whether the occurrence of an Errored Frame Period Event should result in an Event Notification OAMPDU generated by the OAM layer. By default, this ob… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.8.1.5 | ColumncienaCesOamErrFrameWindow | read-only | current | The amount of time (in 100ms increments) over which the threshold is defined. The default value is 10 (1 second). If cienaCesOamErrFrameThreshold frame errors … |
| 1.3.6.1.4.1.1271.2.3.5.1.1.8.1.6 | ColumncienaCesOamErrFrameThreshold | read-only | current | The number of frame errors that must occur for this event to be triggered. The default value is one frame error. If cienaCesOamErrFrameThreshold frame errors o… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.8.1.7 | ColumncienaCesOamErrFrameEvNotifEnable | read-only | current | Indicates whether the occurrence of an Errored Frame Event should result in an Event Notification OAMPDU generated by the OAM layer. By default, this object sh… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.8.1.8 | ColumncienaCesOamErrFrameSecsSummaryWindow | read-only | current | The amount of time (in 100ms intervals) over which the threshold is defined. The default value is 100 (10 seconds). If cienaCesOamErrFrameSecsSummaryThreshold … |
| 1.3.6.1.4.1.1271.2.3.5.1.1.8.1.9 | ColumncienaCesOamErrFrameSecsSummaryThreshold | read-only | current | The number of errored frame seconds that must occur for this event to be triggered. The default value is one errored frame second. If cienaCesOamErrFrameSecsSu… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.8.1.10 | ColumncienaCesOamErrFrameSecsEvNotifEnable | read-only | current | Indicates whether the occurrence of an Errored Frame Seconds Summary Event should result in an Event Notification OAMPDU generated by the OAM layer. By default… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.8.1.11 | ColumncienaCesOamDyingGaspEnable | read-only | current | Indicates whether the local device should attempt to indicate a dying gasp fault via the OAMPDU flags field to its peer OAM entity. If the system does not supp… |
| 1.3.6.1.4.1.1271.2.3.5.1.1.8.1.12 | ColumncienaCesOamCriticalEventEnable | read-only | current | Indicates whether the local device should attempt to indicate a critical event has occurred via the OAMPDU flags field to its peer OAM entity. If the system do… |
| 1.3.6.1.4.1.1271.2.3.5.1.2 | NodecienaCesOamConformance | |||
| 1.3.6.1.4.1.1271.2.3.5.1.2.1 | NodecienaCesOamCompliances | |||
| 1.3.6.1.4.1.1271.2.3.5.1.2.2 | NodecienaCesOamGroups |