CIRCUIT-MIB
80 objects
The MIB module for transport channels
Imported Objects
| CORIOLIS-MIB | circuit coriolisMibs |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | IpAddress |
| SNMPv2-SMI | Counter64 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5812.6.1 | IdentitycircuitMIB | The MIB module for transport channels | ||
| 1.3.6.1.4.1.5812.6.2 | ScalarcircuitLoadBalanceInterval | read-write | current | The default load balancing schedule is to examine 1 circuit every 3 minutes at the GNE. Regardless of whether the circuit is moved to a better ring path or not… |
| 1.3.6.1.4.1.5812.6.3 | ScalarcircuitLoadBalanceNumPerInterval | read-write | current | Indicates the number of circuits being loadbalanced in a fixed interval. The maximum value is 10 circuits per second. |
| 1.3.6.1.4.1.5812.6.4 | ScalarcircuitOldIpAddrToSwap | read-write | current | When a chassis running several circuits has to be moved to a new location with a new different IpAddress, then all the associated circuits has to be properly m… |
| 1.3.6.1.4.1.5812.6.5 | ScalarcircuitNewIpAddrToSwap | read-write | current | When a chassis running several circuits has to be moved to a new location with a new different IpAddress, then all the associated circuits has to be properly m… |
| 1.3.6.1.4.1.5812.6.6 | ScalarcircuitEventInterval | read-write | current | For any circuit related events, events are generated at a specific time interval. circuitEventInterval specifies that. The default value is 1 second. |
| 1.3.6.1.4.1.5812.6.7 | ScalarcircuitEventNumPerInterval | read-write | current | This object specifies the number of events generated per interval. The default is 10 per second. |
| 1.3.6.1.4.1.5812.6.8 | TablecircuitTable | not-accessible | current | A table containing information about the transport channels in the system |
| 1.3.6.1.4.1.5812.6.8.1 | RowcircuitEntry | not-accessible | current | Entry in the table for a single transport channel |
| 1.3.6.1.4.1.5812.6.8.1.1 | ColumncircuitSrcIpAddr | read-write | current | IP address of the source circuit endpoint. |
| 1.3.6.1.4.1.5812.6.8.1.2 | ColumncircuitSrcInterfaceNum | read-write | current | The interface number of the source circuit endpoint. |
| 1.3.6.1.4.1.5812.6.8.1.3 | ColumncircuitSrcConnectionID | read-write | current | Connection Identifier of the source circuit endpoint. Based on the protocol type, further information may be required to completely specify a circuit on a chan… |
| 1.3.6.1.4.1.5812.6.8.1.4 | ColumncircuitSrcDescString | read-only | current | Textual description of the source side of the circuit endpoint. |
| 1.3.6.1.4.1.5812.6.8.1.5 | ColumncircuitDestIpAddr | read-write | current | IP address of the destination circuit endpoint. |
| 1.3.6.1.4.1.5812.6.8.1.6 | ColumncircuitDestInterfaceNum | read-write | current | The interface number of the destination circuit endpoint. |
| 1.3.6.1.4.1.5812.6.8.1.7 | ColumncircuitDestConnectionID | read-write | current | Connection Identifier of the destination circuit endpoint. Based on the protocol type, further information may be required to completely specify a circuit on a… |
| 1.3.6.1.4.1.5812.6.8.1.8 | ColumncircuitDestDescString | read-only | current | Textual description of the destination side of the circuit endpoint. |
| 1.3.6.1.4.1.5812.6.8.1.9 | ColumncircuitName | read-write | current | CircuitName is a unique name given to a circuit. |
| 1.3.6.1.4.1.5812.6.8.1.10 | ColumncircuitID | read-only | current | CircuitID is a unique ID given to a circuit. It is equal to the TC-ID in the PM. |
| 1.3.6.1.4.1.5812.6.8.1.11 | ColumncircuitRowStatus | read-write | current | Indicates if a row has been created or deleted. See SNMPv2-TC for complete description. |
| 1.3.6.1.4.1.5812.6.8.1.12 | ColumncircuitReasonText | read-only | current | Provides the reason for the error indicated. |
| 1.3.6.1.4.1.5812.6.8.1.13 | ColumncircuitFailLocIpAddr | read-only | current | IP address of location where circuit failure code is encountered. |
| 1.3.6.1.4.1.5812.6.8.1.14 | ColumncircuitFailLocSlot1 | read-only | current | Slot number where circuit failure code is encountered. |
| 1.3.6.1.4.1.5812.6.8.1.15 | ColumncircuitFailLocPort1 | read-only | current | Port number where circuit failure code is encountered. |
| 1.3.6.1.4.1.5812.6.8.1.16 | ColumncircuitFailLocInterfaceNum1 | read-only | current | Interface number where circuit failure code is encountered. |
| 1.3.6.1.4.1.5812.6.8.1.17 | ColumncircuitFailLocConnectionID1 | read-only | current | Connection Identifier of the failed circuit endpoint. |
| 1.3.6.1.4.1.5812.6.8.1.18 | ColumncircuitFailLocSlot2 | read-only | current | Slot number where circuit failure code is encountered. |
| 1.3.6.1.4.1.5812.6.8.1.19 | ColumncircuitFailLocPort2 | read-only | current | Port number where circuit failure code is encountered. |
| 1.3.6.1.4.1.5812.6.8.1.20 | ColumncircuitFailLocInterfaceNum2 | read-only | current | Interface number where circuit failure code is encountered. |
| 1.3.6.1.4.1.5812.6.8.1.21 | ColumncircuitFailLocConnectionID2 | read-only | current | Connection Identifier of the failed circuit endpoint. |
| 1.3.6.1.4.1.5812.6.8.1.22 | ColumncircuitEndPoint1Protocol | read-write | current | Protocol determines the connectionID. |
| 1.3.6.1.4.1.5812.6.8.1.23 | ColumncircuitFwdTDType | read-write | current | Specifies the traffic descriptor type associated with the forward traffic descriptor parameters. The forward direction is 'into the network' from the circuit e… |
| 1.3.6.1.4.1.5812.6.8.1.24 | ColumncircuitFwdTDParam1 | read-write | current | Parameter 1 of the forward traffic descriptor of type circuitFwdTdType. For type Ethernet, this value corresponds to CIR. For type Frame Relay, this value corr… |
| 1.3.6.1.4.1.5812.6.8.1.25 | ColumncircuitFwdTDParam2 | read-write | current | Parameter 2 of the forward traffic descriptor of type circuitFwdTdType. For type Ethernet, this value corresponds to Bc. For type Frame Relay, this value corre… |
| 1.3.6.1.4.1.5812.6.8.1.26 | ColumncircuitFwdTDParam3 | read-write | current | Parameter 3 of the forward traffic descriptor of type circuitFwdTdType. For type Ethernet, this value corresponds to Be. For type Frame Relay, this value corre… |
| 1.3.6.1.4.1.5812.6.8.1.27 | ColumncircuitFwdTDParam4 | read-write | current | Parameter 4 of the forward traffic descriptor of type circuitFwdTdType. |
| 1.3.6.1.4.1.5812.6.8.1.28 | ColumncircuitEndPoint2Protocol | read-write | current | Protocol determines the connectionID. |
| 1.3.6.1.4.1.5812.6.8.1.29 | ColumncircuitBwdTDType | read-write | current | Specifies the traffic descriptor type associated with the backward traffic descriptor parameters. The backward direction is 'out of the network' from the circu… |
| 1.3.6.1.4.1.5812.6.8.1.30 | ColumncircuitBwdTDParam1 | read-write | current | Parameter 1 of the backward traffic descriptor of type circuitBwdTdType. For type Ethernet, this value corresponds to CIR. For type Frame Relay, this value cor… |
| 1.3.6.1.4.1.5812.6.8.1.31 | ColumncircuitBwdTDParam2 | read-write | current | Parameter 2 of the backward traffic descriptor of type circuitBwdTdType. For type Ethernet, this value corresponds to Bc. For type Frame Relay, this value corr… |
| 1.3.6.1.4.1.5812.6.8.1.32 | ColumncircuitBwdTDParam3 | read-write | current | Parameter 3 of the backward traffic descriptor of type circuitBwdTdType. For type Ethernet, this value corresponds to Be. For type Frame Relay, this value corr… |
| 1.3.6.1.4.1.5812.6.8.1.33 | ColumncircuitBwdTDParam4 | read-write | current | Parameter 4 of the backward traffic descriptor of type circuitBwdTdType. |
| 1.3.6.1.4.1.5812.6.8.1.34 | ColumncircuitClassOfService | read-write | current | Specifies the class of service for Data or non-TDM circuits. This value is in the range of 0-7 where 1 has the highest priority and 7 has the lowest. |
| 1.3.6.1.4.1.5812.6.8.1.35 | ColumncircuitAdminState | read-write | current | Administrative state of the circuit. Circuits in the disabled state do not consume network resources such as bandwidth. The network continuously attempts to es… |
| 1.3.6.1.4.1.5812.6.8.1.36 | ColumncircuitOperState | read-only | current | Aperational state of the circuit. Circuits in the disabled state do not consume network resources such as bandwidth. The network continuously attempts to estab… |
| 1.3.6.1.4.1.5812.6.8.1.37 | ColumncircuitTimeSinceStatusChange | read-only | current | Gives the time (in seconds) since the most recent status change. |
| 1.3.6.1.4.1.5812.6.8.1.38 | ColumncircuitSetupPriority | read-only | current | If there are insufficient network resources for establishing all transport channels, this field specifies the priority of the transport channel. |
| 1.3.6.1.4.1.5812.6.8.1.39 | ColumncircuitHoldPriority | read-only | current | If a number of transport channels of a low Setup Priority need to be cleared in order to release resources allowing for a higher priority (Setup) transport cha… |
| 1.3.6.1.4.1.5812.6.8.1.40 | ColumncircuitIsRedundancyReqd | read-write | current | Specifies if the circuit is to be established over rings that are logically configured as 'protected'. A protected ring could physically be in a fault state wh… |
| 1.3.6.1.4.1.5812.6.8.1.41 | ColumncircuitPreferredEP1OptSlot | read-write | current | If the circuit spans one or two rings, this is the slot number of the first preferred ring. Preferred rings allow a manual overide of the routed circuit path. |
| 1.3.6.1.4.1.5812.6.8.1.42 | ColumncircuitPreferredEP1OptPort | read-write | current | If the circuit spans one or two rings, this is the port number of the first preferred ring. |
| 1.3.6.1.4.1.5812.6.8.1.43 | ColumncircuitPreferredEP1OptVport | read-write | current | If the circuit spans one or two rings, this is the lambda number of the first preferred ring. |
| 1.3.6.1.4.1.5812.6.8.1.44 | ColumncircuitPreferredEP2OptSlot | read-write | current | If the circuit spans two rings, this is the slot number of the second preferred ring. Preferred rings allow a manual overide of the routed circuit path. |
| 1.3.6.1.4.1.5812.6.8.1.45 | ColumncircuitPreferredEP2OptPort | read-write | current | If the circuit spans two rings, this is the port number of the second preferred ring. |
| 1.3.6.1.4.1.5812.6.8.1.46 | ColumncircuitPreferredEP2OptVport | read-write | current | If the circuit spans two rings, this is the lambda number of the second preferred ring. |
| 1.3.6.1.4.1.5812.6.8.1.47 | ColumncircuitUseAlternateRing | read-write | current | Allows operator to specify whether an alternate ring can be used if the preferred ring(s) fail. This requires the ability to load-balance back onto the preferr… |
| 1.3.6.1.4.1.5812.6.8.1.48 | ColumncircuitInFrames | read-only | current | Number of frames received at the ingress point and passed on to the circuit. |
| 1.3.6.1.4.1.5812.6.8.1.49 | ColumncircuitInDEFrames | read-only | current | Number of frames received at the ingress point and passed on to the circuit. |
| 1.3.6.1.4.1.5812.6.8.1.50 | ColumncircuitInOctets | read-only | current | Number of octets received at the ingress point and passed on to the circuit. |
| 1.3.6.1.4.1.5812.6.8.1.51 | ColumncircuitInDEOctets | read-only | current | Number of octets received at the ingress point and passed on to the circuit. |
| 1.3.6.1.4.1.5812.6.8.1.52 | ColumncircuitInCLP0Cells | read-only | current | Number of cells received at the ingress point and passed on to the circuit. |
| 1.3.6.1.4.1.5812.6.8.1.53 | ColumncircuitInCLP1Cells | read-only | current | Number of cells received at the ingress point and passed on to the circuit. |
| 1.3.6.1.4.1.5812.6.8.1.54 | ColumncircuitInFramesDiscard | read-only | current | Number of frames received at the ingress point but are discarded due to the non-conformance of the contract, i.e., it exceeds the traffic contract (BE). |
| 1.3.6.1.4.1.5812.6.8.1.55 | ColumncircuitInDEFramesDiscard | read-only | current | Number of frames received at the ingress point but are discarded due to the non-conformance of the contract, i.e., it exceeds the traffic contract (BE). |
| 1.3.6.1.4.1.5812.6.8.1.56 | ColumncircuitInOctetsDiscard | read-only | current | Number of octets received at the ingress point but are discarded due to the non-conformance of the contract, i.e., it exceeds the traffic contract (BE). |
| 1.3.6.1.4.1.5812.6.8.1.57 | ColumncircuitInDEOctetsDiscard | read-only | current | Number of octets received at the ingress point but are discarded due to the non-conformance of the contract, i.e., it exceeds the traffic contract (BE). |
| 1.3.6.1.4.1.5812.6.8.1.58 | ColumncircuitInCLP0CellsDiscard | read-only | current | Number of octets received at the ingress point but are discarded due to the non-conformance of the contract, i.e., it exceeds the traffic contract (BE). |
| 1.3.6.1.4.1.5812.6.8.1.59 | ColumncircuitInCLP1CellsDiscard | read-only | current | Number of octets received at the ingress point but are discarded due to the non-conformance of the contract, i.e., it exceeds the traffic contract (BE). |
| 1.3.6.1.4.1.5812.6.8.1.60 | ColumncircuitInFramesTagged | read-only | current | Number of tagged frames received. A tagged frame represents non-conforming frames to the contract (when CIR < frame contract < BE). In these frames, the DE (Di… |
| 1.3.6.1.4.1.5812.6.8.1.61 | ColumncircuitInOctetsTagged | read-only | current | Number of tagged octets received. A tagged octet represents non-conforming octet to the contract (when CIR < octet contract < BE).In these octets, the DE (Disc… |
| 1.3.6.1.4.1.5812.6.8.1.62 | ColumncircuitInCLP0CellsTagged | read-only | current | Number of tagged octets received. A tagged octet represents non-conforming octet to the contract (when CIR < octet contract < BE).In these octets, the DE (Disc… |
| 1.3.6.1.4.1.5812.6.8.1.63 | ColumncircuitOutFrames | read-only | current | Number of frames sent out through the circuit. |
| 1.3.6.1.4.1.5812.6.8.1.64 | ColumncircuitOutDEFrames | read-only | current | Number of frames sent out through the circuit. |
| 1.3.6.1.4.1.5812.6.8.1.65 | ColumncircuitOutOctets | read-only | current | Number of octets sent out through the circuit. |
| 1.3.6.1.4.1.5812.6.8.1.66 | ColumncircuitOutDEOctets | read-only | current | Number of octets sent out through the circuit. |
| 1.3.6.1.4.1.5812.6.8.1.67 | ColumncircuitOutCLP0Cells | read-only | current | Number of cells sent out through the circuit. |
| 1.3.6.1.4.1.5812.6.8.1.68 | ColumncircuitOutCLP1Cells | read-only | current | Number of cells sent out through the circuit. |
| 1.3.6.1.4.1.5812.24 | NodecircuitInactive | Indicates that the circuit became inactive and specifies the reason for it becoming inactive | ||
| 1.3.6.1.4.1.5812.25 | NodecircuitActive | Indicates that the circuit became active | ||
| 1.3.6.1.4.1.5812.26 | NodecircuitLoadBalancing | Indicates that the circuit underwent load balancing |