CISCO-VSI-MASTER-MIB
79 objects
This MIB module contains objects related to the master side of the the Virtual Switch Interface protocol used for control of ATM switches.
Imported Objects
| CISCO-SMI | ciscoMgmt |
| IF-MIB | InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9.9.162 | IdentityciscoVsiMasterMIB | This MIB module contains objects related to the master side of the the Virtual Switch Interface protocol used for control of ATM switches. | ||
| 1.3.6.1.4.1.9.9.162.1 | NodeciscoVsiMasterObjects | |||
| 1.3.6.1.4.1.9.9.162.1.1 | TablevsiMasterControllerTable | not-accessible | current | A table containing a set of VSI controllers. Each controller represents an instance of the VSI Master control protocol. A controller communicates with a set of… |
| 1.3.6.1.4.1.9.9.162.1.1.1 | RowvsiMasterControllerEntry | not-accessible | current | An entry containing management information applicable to a controller which uses the VSI protocol. Controller entries represent internally generated control st… |
| 1.3.6.1.4.1.9.9.162.1.1.1.1 | ColumnvsiControllerIndex | not-accessible | current | A unique value per VSI controller, greater than 0. This object gets its value from the vsiControllerId, and is used for row selection within the vsiMasterContr… |
| 1.3.6.1.4.1.9.9.162.1.1.1.2 | ColumnvsiControllerId | read-only | current | The controller identifier for the VSI controller. Values are arbitrarily assigned by the VSI protocol implementation being managed via this MIB, with local sig… |
| 1.3.6.1.4.1.9.9.162.1.1.1.3 | ColumnvsiCrossConnects | read-only | current | This object contains a value equal to the number of cross-connects being controlled via VSI protocol via this controller. |
| 1.3.6.1.4.1.9.9.162.1.1.1.4 | ColumnvsiControllerType | read-only | current | A VSI controller represents an instance of a service layer accessible to a network control application. This object serves to identify the type of the network … |
| 1.3.6.1.4.1.9.9.162.1.1.1.5 | ColumnvsiBaseVersionSupported | read-only | current | A VSI Master protocol instance defines internally a set of versions of the protocol that it will support. These versions are numbered, by default, starting fro… |
| 1.3.6.1.4.1.9.9.162.1.1.1.6 | ColumnvsiTopVersionSupported | read-only | current | A VSI Master protocol instance defines internally a set of versions of the protocol that it will support. These versions are numbered, by default, starting fro… |
| 1.3.6.1.4.1.9.9.162.1.1.1.7 | ColumnvsiVersionInUse | read-only | current | The number of the VSI version currently being used by this controller. Protocol selection procedures dictate that this should be the highest value of protocol … |
| 1.3.6.1.4.1.9.9.162.1.1.1.8 | ColumnvsiSpecifiedVersion | read-write | current | When this object is written with a non-zero value, re-synchronization procedures will be initiated, if necessary, in order to constrain the master and slaves t… |
| 1.3.6.1.4.1.9.9.162.1.1.1.9 | ColumnvsiControlInterface | read-only | current | A VSI controller communicates with a set of VSI Slaves across a control interface. The controller is connected to the ATM switch via an ATM link called the Sla… |
| 1.3.6.1.4.1.9.9.162.1.1.1.10 | ColumnvsiLogicalControlInterface | read-only | current | This object describes the instance of a logical interface index bound to the slave end of the Slave Control Link, which is referred to in the description of vs… |
| 1.3.6.1.4.1.9.9.162.1.2 | TablevsiSessionTable | not-accessible | current | A table containing VSI master-slave session status information. Each VSI controller manages a set of VSI slaves, via a protocol instance called a Session. VSI … |
| 1.3.6.1.4.1.9.9.162.1.2.1 | RowvsiSessionEntry | not-accessible | current | A vsiSessionEntry is a set of objects that together represent the status of each instance of VSI protocol and the slave in an ATM switch to which that instance… |
| 1.3.6.1.4.1.9.9.162.1.2.1.1 | ColumnvsiSessionControllerIndex | not-accessible | current | The ID of the controller which controls this master-slave session. This identifies which vsiMasterControllerEntry represents the controller communicating with … |
| 1.3.6.1.4.1.9.9.162.1.2.1.2 | ColumnvsiSessionIndex | not-accessible | current | A VSI controller discovers a set of slaves through VSI protocol. Each of the discovered slaves is bound to a protocol Session and each of these Sessions occupi… |
| 1.3.6.1.4.1.9.9.162.1.2.1.3 | ColumnvsiSessionVpi | read-only | current | The virtual path identifier for this VSI master-slave session. The Slave Control Link, referred to in the description of vsiLogicalControlInterface, supports a… |
| 1.3.6.1.4.1.9.9.162.1.2.1.4 | ColumnvsiSessionVci | read-only | current | The virtual channel identifier for this VSI master-slave session. The Slave Control Link, referred to in the description of vsiLogicalControlInterface, support… |
| 1.3.6.1.4.1.9.9.162.1.2.1.5 | ColumnvsiSessionSwitchId | read-only | current | The identifier of the switch which participates in this VSI master-slave session. The switch terminates the virtual circuit identified by the vpi/vci pair refe… |
| 1.3.6.1.4.1.9.9.162.1.2.1.6 | ColumnvsiSessionSwitchName | read-only | current | The IP hostname for the slave switch which is controlled by this session. This is an ascii string of maximum length 64 characters, learned from the ATM switch. |
| 1.3.6.1.4.1.9.9.162.1.2.1.7 | ColumnvsiSessionSlaveId | read-only | current | The identifier of the slave for this VSI master-slave session. This value is learned from the slave on the switch. |
| 1.3.6.1.4.1.9.9.162.1.2.1.8 | ColumnvsiSessionState | read-only | current | The state of the VSI session. inactive(1): communications data structures for communicating with the slave have been created, but the VSI protocol has not been… |
| 1.3.6.1.4.1.9.9.162.1.2.1.9 | ColumnvsiSessionWindowSize | read-only | current | The maximum number of command messages the VSI master will send before requiring a response from slave. If the value is 0, then flow control is not enabled. |
| 1.3.6.1.4.1.9.9.162.1.2.1.10 | ColumnvsiSessionCmdsPending | read-only | current | The number of unacknowledged command messages. The VSI master sends commands to the slave, without receiving acknowledgement, until the window size threshold h… |
| 1.3.6.1.4.1.9.9.162.1.2.1.11 | ColumnvsiSessionActiveId | read-only | current | ID supplied by the slave to identify the session. This value is interpreted by the master, when a change occurs, to indicate that a resync should be inititated. |
| 1.3.6.1.4.1.9.9.162.1.2.1.12 | ColumnvsiSessionPowerupId | read-only | current | ID supplied by the slave to identify the session at powerup. This is the initial value for vsiSessionActiveId, and its default is zero. Changes in vsiSessionAc… |
| 1.3.6.1.4.1.9.9.162.1.3 | TablevsiLogicalIfTable | not-accessible | current | A table containing information about logical interfaces on the slave switch controlled via VSI. Logical interfaces are an abstraction of exposed, external ATM … |
| 1.3.6.1.4.1.9.9.162.1.3.1 | RowvsiLogicalIfEntry | not-accessible | current | An entry containing information about a single VSI logical interface. Entries are instantiated and removed as signalled by the slave which controls the externa… |
| 1.3.6.1.4.1.9.9.162.1.3.1.1 | ColumnvsiLogicalIfControllerIndex | not-accessible | current | The VSI controller index of the controller through which this logical interface was learned. |
| 1.3.6.1.4.1.9.9.162.1.3.1.2 | ColumnvsiLogicalIfIndex | not-accessible | current | A unique value, greater than zero, for each VSI logical interface. Logical interface numbers are selected by the switch to be unique and persistent. The same n… |
| 1.3.6.1.4.1.9.9.162.1.3.1.3 | ColumnvsiLogicalIfName | read-only | current | The physical descriptor of the logical interface, as reported by the VSI slave. It is distinct from ifName. |
| 1.3.6.1.4.1.9.9.162.1.3.1.4 | ColumnvsiLogicalIfOperState | read-only | current | The VSI operational state of the logical interface as reported to the VSI master by the VSI slave. removed(1): the interface is not a valid interface for this … |
| 1.3.6.1.4.1.9.9.162.1.3.1.5 | ColumnvsiLogicalIfAdminState | read-only | current | The current administrative (configured) state of the interface, as reported to the VSI master by the VSI slave. down(1): the interface is not a valid interface… |
| 1.3.6.1.4.1.9.9.162.1.3.1.6 | ColumnvsiLogicalIfRxCells | read-only | current | The number of cells received via this logical interface as reported to the VSI master by the VSI slave. |
| 1.3.6.1.4.1.9.9.162.1.3.1.7 | ColumnvsiLogicalIfTxCells | read-only | current | The number of cells transmitted via this logical interface as reported to the VSI master by the VSI slave. |
| 1.3.6.1.4.1.9.9.162.1.3.1.8 | ColumnvsiLogicalIfRxCellsDiscarded | read-only | current | The number of received cells discarded by this logical interface as reported to the VSI master by the VSI slave. |
| 1.3.6.1.4.1.9.9.162.1.3.1.9 | ColumnvsiLogicalIfTxCellsDiscarded | read-only | current | The number of transmitted cells discarded by this logical interface as reported to the VSI master by the VSI slave. |
| 1.3.6.1.4.1.9.9.162.1.3.1.10 | ColumnvsiLogicalIfRxHeaderErrors | read-only | current | The number of cells received via this logical interface which had header errors, as reported to the VSI master by the VSI slave. |
| 1.3.6.1.4.1.9.9.162.1.3.1.11 | ColumnvsiLogicalIfRxInvalidAddrs | read-only | current | The number of cells received by this logical interface which had invalid addresses, as reported to the VSI master by the VSI slave. An unknown vpi/vci value se… |
| 1.3.6.1.4.1.9.9.162.1.3.1.12 | ColumnvsiLogicalIfEndPointsInUse | read-only | current | The number of end points in use on this logical interface, as reported to the VSI master by the VSI slave. If this logical interface has not been removed, but … |
| 1.3.6.1.4.1.9.9.162.1.3.1.13 | ColumnvsiLogicalIfAvailIngressChnls | read-only | current | The number of ingress channels available for this logical interface, as reported to the VSI master by the VSI slave. |
| 1.3.6.1.4.1.9.9.162.1.3.1.14 | ColumnvsiLogicalIfAvailEgressChnls | read-only | current | The number of egress channels available for this logical interface, as reported to the VSI master by the VSI slave. |
| 1.3.6.1.4.1.9.9.162.1.3.1.15 | ColumnvsiLogicalIfAvailIngressCellRate | read-only | current | The available ingress cell rate in cells/second for the logical interface, as reported to the VSI master by the VSI slave. |
| 1.3.6.1.4.1.9.9.162.1.3.1.16 | ColumnvsiLogicalIfAvailEgressCellRate | read-only | current | The available egress cell rate in cells/second for the logical interface, as reported to the VSI master by the VSI slave. |
| 1.3.6.1.4.1.9.9.162.1.3.1.17 | ColumnvsiLogicalIfVcMergeSupported | read-only | current | If this object has the value true(1) then VC merge capability is supported for this logical interface. Otherwise VC merge capability is not supported on this l… |
| 1.3.6.1.4.1.9.9.162.1.3.1.18 | ColumnvsiLogicalIfMulticastSupported | read-only | current | If this object has the value true(1) then multicast capability is supported for this logical interface. Otherwise multicast capability is not supported on this… |
| 1.3.6.1.4.1.9.9.162.1.3.1.19 | ColumnvsiLogicalIfVpiTranslated | read-only | current | If this object has the value true(1) then vpi values entering on this logical interface are translated at the other end of the link. This translation may be an… |
| 1.3.6.1.4.1.9.9.162.1.3.1.20 | ColumnvsiLogicalIfStrictSigRange | read-only | current | If this object has the value true(1) then signalling addresses must be in the strict advertised range for the high-address (vpi). Otherwise, signalling address… |
| 1.3.6.1.4.1.9.9.162.1.3.1.21 | ColumnvsiLogicalIfMaxIngressCellRate | read-only | current | The maximum ingress cell rate in cells/second for the logical interface, as reported to the VSI. This value is the limiting value for vsiLogicalIfAvailIngressC… |
| 1.3.6.1.4.1.9.9.162.1.3.1.22 | ColumnvsiLogicalIfMaxEgressCellRate | read-only | current | The maximum egress cell rate in cells/second for the logical interface, as reported to the VSI master by the VSI slave. |
| 1.3.6.1.4.1.9.9.162.1.3.1.23 | ColumnvsiLogicalIfMinVpi | read-only | current | Minimum allowed vpi value for this interface as reported by VSI slave switch. |
| 1.3.6.1.4.1.9.9.162.1.3.1.24 | ColumnvsiLogicalIfMaxVpi | read-only | current | Maximum allowed vpi value for this interface as reported by VSI slave switch. |
| 1.3.6.1.4.1.9.9.162.1.3.1.25 | ColumnvsiLogicalIfMinVci | read-only | current | Minimum allowed vci value for this interface as reported by VSI slave switch. |
| 1.3.6.1.4.1.9.9.162.1.3.1.26 | ColumnvsiLogicalIfMaxVci | read-only | current | Maximum allowed vci value for this interface as reported by VSI slave switch. |
| 1.3.6.1.4.1.9.9.162.1.3.1.27 | ColumnvsiLogicalControlIfIndex | read-only | current | The interface index for the interface which controls this logical interface. This is the ifIndex of the controlling xtagatm interface, and is a direct manifest… |
| 1.3.6.1.4.1.9.9.162.1.3.1.28 | ColumnvsiLogicalIfSessionIndex | read-only | current | All logical interfaces are in the domain of a VSI slave, which communicates with the VSI master through a Session. This object is a selector for an entry in th… |
| 1.3.6.1.4.1.9.9.162.1.4 | TablevsiXCTable | not-accessible | current | A table containing information about crossconnects on the slave switch controlled via VSI. Cross connects represent virtual links across two interfaces. The pa… |
| 1.3.6.1.4.1.9.9.162.1.4.1 | RowvsiXCEntry | not-accessible | current | An entry containing information about one unidirectional or bidirectional crossconnect on the slave switch controlled via VSI. A VSI controller represents an i… |
| 1.3.6.1.4.1.9.9.162.1.4.1.1 | ColumnvsiXCControllerIndex | not-accessible | current | The index of the VSI controller through which this crossconnect was instantiated. This object is the index for a vsiControllerTable entry; the controller index… |
| 1.3.6.1.4.1.9.9.162.1.4.1.2 | ColumnvsiXCLogicalIfLow | not-accessible | current | The VSI logical interface index for the first endpoint of the cross-connect. This object is the selector index for one of the two vsiLogicalIfTable entries tha… |
| 1.3.6.1.4.1.9.9.162.1.4.1.3 | ColumnvsiXCLogicalIfHi | not-accessible | current | The VSI logical interface index for the second endpoint of the cross-connect. This object is the selector index for one of the two vsiLogicalIfTable entries th… |
| 1.3.6.1.4.1.9.9.162.1.4.1.4 | ColumnvsiXCIndex | not-accessible | current | A unique value greater than zero, for each crossconnect within the set of VsiXCTable entries indexed by vsiXCLogicalIfLow and vsiXCLogicalIfHi. The value shoul… |
| 1.3.6.1.4.1.9.9.162.1.4.1.5 | ColumnvsiXCState | read-only | current | The operational state of the cross connect, as reported to the VSI master by the VSI slave. deleted(1): the connection does not exist. reserved(2): connection … |
| 1.3.6.1.4.1.9.9.162.1.4.1.6 | ColumnvsiXCVpiLow | read-only | current | The vpi of that endpoint of the cross-connect which terminates on the logical interface whose index is given by vsiXCLogicalIfLow. |
| 1.3.6.1.4.1.9.9.162.1.4.1.7 | ColumnvsiXCVciLow | read-only | current | The vci of that endpoint of the cross-connect which terminates on the logical interface whose index is given by vsiXCLogicalIfLow. |
| 1.3.6.1.4.1.9.9.162.1.4.1.8 | ColumnvsiXCVpiHi | read-only | current | The vpi of that endpoint of the cross-connect which terminates on the logical interface whose index is given by vsiXCLogicalIfHi. |
| 1.3.6.1.4.1.9.9.162.1.4.1.9 | ColumnvsiXCVciHi | read-only | current | The vci of that endpoint of the cross-connect which terminates on the logical interface whose index is given by vsiXCLogicalIfHi. |
| 1.3.6.1.4.1.9.9.162.2 | NodeciscoVsiMasterNotifications | |||
| 1.3.6.1.4.1.9.9.162.3 | NodeciscoVsiMasterConformance | |||
| 1.3.6.1.4.1.9.9.162.3.1 | NodeciscoVsiMasterGroups | |||
| 1.3.6.1.4.1.9.9.162.3.1.1 | GroupciscoVsiMasterGeneralGroup | current | Objects that apply to all VSI Master implementations. | |
| 1.3.6.1.4.1.9.9.162.3.2 | NodeciscoVsiMasterCompliances | |||
| 1.3.6.1.4.1.9.9.162.3.2.1 | ComplianceciscoVsiMasterModuleCompliance | read-only | current | The basic implentation requirements for agents that support this VSI Master MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VsiControllerIndex | Integer32 (1..2147483647) | current | This textual convention defines the controller index for each Virtual Switch Interface (VSI) controller in the domain of the VSI Master. The value is an internally generated unique number with local significance only. I… |
| VsiLogicalIfIndex | Integer32 (1..2147483647) | current | This textual convention defines a unique value, greater than zero, for each VSI logical interface controlled by the managed system. A logical interface index is an abstract number that is generated and provided by a Sla… |
| VsiSessionIndex | Integer32 (1..2147483647) | current | This textual convention defines a unique value, greater than zero, for each VSI session in the managed system. The value should remain constant after a VSI session is reinitialized. |
| VsiXCIndex | Integer32 (1..2147483647) | current | This textual convention defines a unique value, greater than zero, for each cross connect on a managed system controlled by VSI. The value should remain constant after a crossconnect is initialized, for the duration of … |