MIB Viewer

CL-PKTC-EUE-EDVA-MIB

58 objects
This MIB module contains configuration MIB objects for the PacketCable E-DVA.
OIDNameAccessStatusDescription
1.3.6.1.4.1.4491.2.2.10.1.1IdentitypktcEDVAMIBThis MIB module contains configuration MIB objects for the PacketCable E-DVA.
1.3.6.1.4.1.4491.2.2.10.1.1.0NodepktcEDVANotification
1.3.6.1.4.1.4491.2.2.10.1.1.1NodepktcEDVAObjects
1.3.6.1.4.1.4491.2.2.10.1.1.1.1NodepktcEDVAProfile
1.3.6.1.4.1.4491.2.2.10.1.1.1.1.1ScalarpktcEDVAProfileVersionread-onlycurrentThis MIB Object represents the E-DVA Profile Version for this MIB module. The eUE MUST set this MIB Object to a value of '1.0'.
1.3.6.1.4.1.4491.2.2.10.1.1.1.2ScalarpktcEDVALineNumberCountread-onlycurrentThis object MUST identify the number of physical, telephony endpoints on an E-DVA.
1.3.6.1.4.1.4491.2.2.10.1.1.1.3NodepktcEDVANetDiscProfile
1.3.6.1.4.1.4491.2.2.10.1.1.1.3.1TablepktcEDVANetDiscTablenot-accessiblecurrentThis data table represents the Network Disconnect time for each line provided by the E-DVA.
1.3.6.1.4.1.4491.2.2.10.1.1.1.3.1.1RowpktcEDVANetDiscEntrynot-accessiblecurrentEach entry in this data table describes the Network Disconnect Time for the associated line.
1.3.6.1.4.1.4491.2.2.10.1.1.1.3.1.1.1ColumnpktcEDVANetDiscread-writecurrentThis object specifies the time in milliseconds that the E-DVA must remove DC bias when a call has been cleared by the network. A value of zero (0) indicates th…
1.3.6.1.4.1.4491.2.2.10.1.1.1.4NodepktcEDVAAnsSupProfile
1.3.6.1.4.1.4491.2.2.10.1.1.1.4.1TablepktcEDVAAnsSupTablenot-accessiblecurrentThis data table represents the Answer Supervision for each line provided by the E-DVA.
1.3.6.1.4.1.4491.2.2.10.1.1.1.4.1.1RowpktcEDVAAnsSupEntrynot-accessiblecurrentEach entry in this data table describes the Answer Supervision for the associated line.
1.3.6.1.4.1.4491.2.2.10.1.1.1.4.1.1.1ColumnpktcEDVAAnsSupread-writecurrentThis object specifies the Answer Supervision state. Answer Supervision (also called battery reversal, reverse DC bias, or Reverse Loop Current Feed) is signale…
1.3.6.1.4.1.4491.2.2.10.1.1.1.5NodepktcEDVADtmfProfile
1.3.6.1.4.1.4491.2.2.10.1.1.1.5.1ScalarpktcEDVADtmfRelayread-writecurrentThis MIB Object represents the DTMF Relay status for the E-DVA. The E-DVA must support the use of DTMF for both dialed digits and for the relay of digits as pa…
1.3.6.1.4.1.4491.2.2.10.1.1.1.6NodepktcEDVAEndPointCfgProfile
1.3.6.1.4.1.4491.2.2.10.1.1.1.6.1TablepktcEDVAEndPntConfigTablenot-accessiblecurrentThis table describes configuration data pertaining for each end point (telephony line). The number of entries in this table represents the number of provisione…
1.3.6.1.4.1.4491.2.2.10.1.1.1.6.1.1RowpktcEDVAEndPntConfigEntrynot-accessiblecurrentThis Object represents the conceptual row in the pktcEDVAEndPntConfigTable. Each entry describes the configuration data for the associated line.
1.3.6.1.4.1.4491.2.2.10.1.1.1.6.1.1.1ColumnpktcEDVAEndPntDtmfMinPlayoutread-writecurrentThis object defines the minimum playout time for the DTMF digit when IETF RFC 4734 DTMF Relay is used for the egress gateway. If the value set via this pktcEDV…
1.3.6.1.4.1.4491.2.2.10.1.1.1.6.1.1.2ColumnpktcEDVAEndPntHookStateread-onlycurrentThis object indicates the state of an endpoint with respect to the hook state and, potentially, to the 'significant activities', which should not be interrupte…
1.3.6.1.4.1.4491.2.2.10.1.1.1.6.1.1.3ColumnpktcEDVAEndPntFaxDetectionread-writecurrentThis MIB object is used to configure the distinctive fax calling tone (CNG) detection feature on an MTA endpoint with reference to the analog interface. When s…
1.3.6.1.4.1.4491.2.2.10.1.1.1.6.1.1.4ColumnpktcEDVAEndPntQosPreconditionsread-writecurrentThis MIB object is used to configure the QoS preconditions for the end point. The QoS precondition procedures are defined in RFC 3312. When using QoS precondit…
1.3.6.1.4.1.4491.2.2.10.1.1.1.7NodepktcEDVAPrLossProfile
1.3.6.1.4.1.4491.2.2.10.1.1.1.7.1TablepktcEDVAPrLossTablenot-accessiblecurrentThe DVA supports two provisioned loss parameters, one for the D/A direction (towards the subscriber) and one for A/D direction (from the subscriber) direction.…
1.3.6.1.4.1.4491.2.2.10.1.1.1.7.1.1RowpktcEDVAPrLossEntrynot-accessiblecurrentThe DVA supports two provisioned loss parameters, one for the D/A direction (towards the subscriber) and one for A/D direction (from the subscriber) direction.…
1.3.6.1.4.1.4491.2.2.10.1.1.1.7.1.1.1ColumnpktcEDVAPrLossDAread-writecurrentThis object specifies the provisioned loss parameter for the D/A direction (towards the subscriber) in dB. The E-DVA MUST implement this element per the Packet…
1.3.6.1.4.1.4491.2.2.10.1.1.1.7.1.1.2ColumnpktcEDVAPrLossADread-writecurrentThis object specifies the provisioned loss parameter for the A/D direction (from the subscriber)in dB. The E-DVA MUST implement this element per the PacketCabl…
1.3.6.1.4.1.4491.2.2.10.1.1.1.8NodepktcEDVAMWIProfile
1.3.6.1.4.1.4491.2.2.10.1.1.1.8.1TablepktcEDVAMWISignalTypesTablenot-accessiblecurrentThis table represents the Signal Types for the Message Waiting Indicator (MWI) generated by each line provided by the E-DVA.
1.3.6.1.4.1.4491.2.2.10.1.1.1.8.1.1RowpktcEDVAMWISignalTypesEntrynot-accessiblecurrentEach entry in this data table describes the MWI Signal Type for the associated line. Each line can use any of the Signal types, defined by the entry, to indica…
1.3.6.1.4.1.4491.2.2.10.1.1.1.8.1.1.1ColumnpktcEDVAMwiOnHookread-writecurrentThis object defines the type of the Message Waiting Indicator (MWI) used when the E-DVA is on-hook. The value of 'mwiFskInd(1)' indicates that the E-DVA MUST u…
1.3.6.1.4.1.4491.2.2.10.1.1.1.8.1.1.2ColumnpktcEDVAMwiOffHookread-writecurrentThis object defines the type of the Message Waiting Indicator (MWI) used when the E-DVA is off-hook. The value of 'mwiToneInd(1)' indicates that the E-DVA MUST…
1.3.6.1.4.1.4491.2.2.10.1.1.1.9NodepktcEDVACodecProfile
1.3.6.1.4.1.4491.2.2.10.1.1.1.9.1ScalarpktcEDVACodecPktread-writecurrentThis object specifies the packetization period of any codec payload. The E-DVA MUST implement this element per the PacketCable Residential SIP Telephony E-DVA …
1.3.6.1.4.1.4491.2.2.10.1.1.1.9.2ScalarpktcEDVACodecT38read-writecurrentThis object specifies whether fax relay is enabled/disabled. A value of 'true' (ON) enables fax relay on the E-DVA. The E-DVA MUST implement this element per t…
1.3.6.1.4.1.4491.2.2.10.1.1.1.9.3ScalarpktcEDVACodecV152read-writecurrentThis object specifies whether modem relay is enabled/disable. A value of 'true' (ON) enables modem relay on the E-DVA. The E-DVA MUST implement this element pe…
1.3.6.1.4.1.4491.2.2.10.1.1.1.9.4ScalarpktcEDVACodecPubRepAddrTyperead-writecurrentThis object specifies the domain for the address specified in pktcEDVACodecPubRepAddr. If the element pktcEDVACodecPubRepAddr contains a valid IP address, this…
1.3.6.1.4.1.4491.2.2.10.1.1.1.9.5ScalarpktcEDVACodecPubRepAddrread-writecurrentThis object specifies the network address that receives the call statistics report from the E-DVA. Publish reports must be sent at the end of each call if enab…
1.3.6.1.4.1.4491.2.2.10.1.1.1.9.6ScalarpktcEDVACodecRTCPXRread-writecurrentThis object specifies if extended reports for the sake of voice metrics are included within RTCP packets. A value of 'true' (ON) enables RTCP extended reports.…
1.3.6.1.4.1.4491.2.2.10.1.1.1.9.7ScalarpktcEDVACodecRTCPRateread-writecurrentThis object specifies the interval at which RTCP packets are sent from the E-DVA. A value of zero for RTCP_RATE disables RTCP transmission. The E-DVA MUST impl…
1.3.6.1.4.1.4491.2.2.10.1.1.1.10NodepktcEDVAAnnounceProfile
1.3.6.1.4.1.4491.2.2.10.1.1.1.10.1ScalarpktcEDVAToneIdentifierread-writedeprecatedThis MIB Object specifies the tone identifier for an E-DVA.
1.3.6.1.4.1.4491.2.2.10.1.1.1.10.2ScalarpktcEDVAAudioAnnounceIdread-writedeprecatedThis MIB Object specifies the audio announcement identifier for an E-DVA.
1.3.6.1.4.1.4491.2.2.10.1.1.1.11NodepktcEDVALocInfoProfile
1.3.6.1.4.1.4491.2.2.10.1.1.1.11.1ScalarpktcEDVALocationInfoPrefread-writecurrentThis object specifies the preference for the format type of location information (Presence Information Data Format - Location Object, or PIDF-LO) the UE should…
1.3.6.1.4.1.4491.2.2.10.1.1.1.11.2ScalarpktcEDVALocationInfoTyperead-writecurrentThis object specifies the format of the Location Information supplied to the UE and contained in the pktcEDVALocationInfo MIB Object. When the location informa…
1.3.6.1.4.1.4491.2.2.10.1.1.1.11.3ScalarpktcEDVALocationInforead-writecurrentThis object contains the Location Information data which specifies the location of the UE. The information on the UE location can be delivered to the UE via DH…
1.3.6.1.4.1.4491.2.2.10.1.1.2NodepktcEDVAConformance
1.3.6.1.4.1.4491.2.2.10.1.1.2.1NodepktcEDVACompliances
1.3.6.1.4.1.4491.2.2.10.1.1.2.1.1CompliancepktcEDVACompliancenot-accessiblecurrentThe compliance statement for implementations of the EDVA MIB.
1.3.6.1.4.1.4491.2.2.10.1.1.2.1.2CompliancepktcEDVADeprecatedCompliancedeprecatedThe compliance statement for deprecated objects of the EDVA MIB.
1.3.6.1.4.1.4491.2.2.10.1.1.2.2NodepktcEDVAGroups
1.3.6.1.4.1.4491.2.2.10.1.1.2.2.1GrouppktcEDVAProfileGroupcurrentThe eUE RST Profile Group.
1.3.6.1.4.1.4491.2.2.10.1.1.2.2.2GrouppktcEDVAGroupcurrentThe E-DVA Group.
1.3.6.1.4.1.4491.2.2.10.1.1.2.2.3GrouppktcEDVADeprecatedGroupdeprecatedThe E-DVA Group of deprecated objects.
Type Definitions
NameSyntaxStatusDescription
PktcEUETCLocInfoOCTET STRINGcurrentThis TEXTUAL CONVENTION is being defined to be identify the objects which contain the Location Information of PacketCable UEs. The particular format of the object with the Location Information should be defined by the a…
PktcEUETCLocInfoTypeINTEGER { locInfoCivic(1), locInfoGeo(2) }currentThis TEXTUAL CONVENTION is being defined to identify the type of the objects which contain the Location Information of PacketCable UEs. If the Location Information provided to a UE is presented as a Civic Address, then …