CLARENT-MIB
275 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises IpAddress NetworkAddress |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2858 | Nodeclarent | |||
| 1.3.6.1.4.1.2858.1 | Nodegateway | |||
| 1.3.6.1.4.1.2858.1.1 | ScalargatewayStatus | read-only | mandatory | The number of ports currently in use, as well as the number of calls, call time, and hold time for each port (# sign-delimited string) |
| 1.3.6.1.4.1.2858.1.2 | ScalarportInUseCount | read-only | mandatory | Number of ports currently in use |
| 1.3.6.1.4.1.2858.1.3 | ScalargwnumberOfCalls | read-only | mandatory | Number of calls per port (comma-delimited string) |
| 1.3.6.1.4.1.2858.1.4 | ScalarportCallTime | read-only | mandatory | Call time per port (comma-delimited string) |
| 1.3.6.1.4.1.2858.1.5 | ScalarportHoldTime | read-only | mandatory | Hold time per port (comma-delimited string) |
| 1.3.6.1.4.1.2858.1.6 | ScalartrafficStatus | read-only | mandatory | Traffic information: idle, ingress, egress, fax, and out of service time |
| 1.3.6.1.4.1.2858.1.7 | ScalargwOperState | read-only | mandatory | State of the GW, enabled means running, disabled means not running |
| 1.3.6.1.4.1.2858.1.8 | ScalargwBoardType | read-only | mandatory | Type of boards loaded in Gateway |
| 1.3.6.1.4.1.2858.1.9 | ScalargwNumBoards | read-only | mandatory | Number of boards loaded in Gateway |
| 1.3.6.1.4.1.2858.1.10 | ScalargwPortsPerFirstSpan | read-only | mandatory | number of ports on the first span in a multi-span board |
| 1.3.6.1.4.1.2858.1.11 | ScalargwPortsPerSpan | read-only | mandatory | number of ports on a span in a multi-span board |
| 1.3.6.1.4.1.2858.1.12 | ScalargwSpansPerBoard | read-only | mandatory | number of spans on a board |
| 1.3.6.1.4.1.2858.1.13 | ScalargwPortStatusList | read-only | mandatory | returns an OCTET string of length equal to the number of ports in the system. Each byte indicates the status of the port at that offset. That values are identi… |
| 1.3.6.1.4.1.2858.2 | Nodeccreadvars | |||
| 1.3.6.1.4.1.2858.2.1 | ScalarccStatus | read-only | mandatory | Clarent Command Center status |
| 1.3.6.1.4.1.2858.2.2 | ScalarccOperState | read-only | mandatory | State of the CC, enabled means running, disabled means not running |
| 1.3.6.1.4.1.2858.3 | Noderdc | |||
| 1.3.6.1.4.1.2858.3.1 | ScalarrdcStatus | read-only | mandatory | Roaming Domain Controller status |
| 1.3.6.1.4.1.2858.4 | Nodeclarent-traps | |||
| 1.3.6.1.4.1.2858.4.9901 | NodegatewayIsDown | Clarent Gateway is down | ||
| 1.3.6.1.4.1.2858.4.9902 | NoderestartGWSuccess | Clarent Gateway restarted successfully | ||
| 1.3.6.1.4.1.2858.4.9903 | NoderestartGWFailed | Clarent Gateway failed to restart | ||
| 1.3.6.1.4.1.2858.4.9904 | NodeccIsDown | Clarent Command Center is down | ||
| 1.3.6.1.4.1.2858.4.9905 | NoderestartCCSuccess | Clarent Command Center restarted successfully | ||
| 1.3.6.1.4.1.2858.4.9906 | NoderestartCCFailed | Clarent Command Center failed to restart | ||
| 1.3.6.1.4.1.2858.4.9907 | NodelostCC | Clarent Gateway lost its connection to the specified Command Center | ||
| 1.3.6.1.4.1.2858.4.9908 | NodeconnectCCFailed | Clarent Gateway cannot connect to the specified Command Center | ||
| 1.3.6.1.4.1.2858.4.9911 | NodeportOutOfService | Clarent Gateway port is out of service | ||
| 1.3.6.1.4.1.2858.4.9912 | NodeportInService | Clarent Gateway port is back in service | ||
| 1.3.6.1.4.1.2858.4.9913 | NodedialUpNoVoicePort | Clarent Gateway cannot dial number; no voice port is available | ||
| 1.3.6.1.4.1.2858.4.9914 | NodeconnectNoVoicePort | Clarent Gateway cannot connect to another gateway; not responding | ||
| 1.3.6.1.4.1.2858.4.9915 | NodegatewayConnect | Clarent Gateway, at the specified IP address, connected to Command Center | ||
| 1.3.6.1.4.1.2858.4.9916 | NodegatewayDisconnect | Clarent Gateway, at the specified IP address, disconnected from Command Center | ||
| 1.3.6.1.4.1.2858.4.9917 | NodegwNotRegistered | Clarent Gateway is not registered | ||
| 1.3.6.1.4.1.2858.4.9918 | NodecallRatingFailed | Call rating failed | ||
| 1.3.6.1.4.1.2858.4.9919 | NodeinvalidCCLicense | Invalid Command Center license | ||
| 1.3.6.1.4.1.2858.4.9920 | NodevalidCCTmpLicense | Valid temporary Command Center license | ||
| 1.3.6.1.4.1.2858.4.9921 | Nodess7LinkUp | SS7 link is up | ||
| 1.3.6.1.4.1.2858.4.9922 | Nodess7LinkDown | SS7 link is down | ||
| 1.3.6.1.4.1.2858.4.9927 | NodegwAppShutdown | Clarent Gateway shut down | ||
| 1.3.6.1.4.1.2858.4.9928 | NoderesettingDSPBrd | Resetting DSP board | ||
| 1.3.6.1.4.1.2858.4.9929 | NodeclrHseCreditSChg | Clarent Connect clearinghouse credit status changed | ||
| 1.3.6.1.4.1.2858.4.9930 | NodeccCreditSChg | Clarent Connect credit status changed | ||
| 1.3.6.1.4.1.2858.4.9931 | NodevalidateEGErr | Clarent Gateway validate egress error | ||
| 1.3.6.1.4.1.2858.4.9932 | NodelicRollBack | Clarent Command Center license key change rolled back | ||
| 1.3.6.1.4.1.2858.4.9933 | NodeclarentInfo | Generic Clarent error trap: Severity: Critical(0), Major(1), Minor(2), Warning(3), or Information(4) Class: Configuration(0), Hardware(1), or Software(2) Numbe… | ||
| 1.3.6.1.4.1.2858.4.9934 | NodesoftwareUpdate | Software update: Name of package Package operation: Download(0), Unpack(1), Install(2), Prepare(3), Commit(4), Abort(5), Delete(8) Package operation status Err… | ||
| 1.3.6.1.4.1.2858.4.9935 | NodenumberIntercept | Call placed to the intercept number | ||
| 1.3.6.1.4.1.2858.4.9936 | NodetpIsDown | Clarent ThroughPacket server is down | ||
| 1.3.6.1.4.1.2858.4.9937 | NoderestartTPFailed | Clarent ThroughPacket server failed to restart | ||
| 1.3.6.1.4.1.2858.4.9938 | NodetpRestarted | Clarent ThroughPacket server restarted successfully | ||
| 1.3.6.1.4.1.2858.4.9939 | NodethreshHoldTrap | Clarent ThreshHold Trap, indicates that a particular Threshold has been exceeded or rearmed by the named Application. This trap contains 1) The Severity of the… | ||
| 1.3.6.1.4.1.2858.4.9940 | NodesystemReboot | The system is rebooting in response to a startShutdown command | ||
| 1.3.6.1.4.1.2858.4.9941 | NoderebootCommand | The system has been enabled to receive a startShutdown command | ||
| 1.3.6.1.4.1.2858.4.9942 | NodecDiskSpaceLow | Drive has less than 50MB of free space available. This trap is issued on an hourly basis if the condition persists. | ||
| 1.3.6.1.4.1.2858.4.9943 | NodecNoConnectRoute | Clarent Connect partner does not have a route for this call. This trap is issued no more than once every 5 minutes. | ||
| 1.3.6.1.4.1.2858.4.9944 | NodedbError | Clarent DB error trap contains the following information Severity: Critical(0), Major(1), Minor(2), Warning(3), or Information(4) Database error number Descrip… | ||
| 1.3.6.1.4.1.2858.4.9945 | NodedbClerkStarted | A new database clerk was started. The value of trapNumber represents the total number of clerks running. | ||
| 1.3.6.1.4.1.2858.4.9946 | NoderestartDMFailed | Clarent Distribution Service failed to restart | ||
| 1.3.6.1.4.1.2858.4.9947 | NodedmRestarted | Clarent Distribution Service restarted successfully | ||
| 1.3.6.1.4.1.2858.4.9948 | NodedmIsDown | Clarent Distribution Service is down | ||
| 1.3.6.1.4.1.2858.4.9949 | NodesigGWMTPPause | The Message Transfer Protocol paused | ||
| 1.3.6.1.4.1.2858.4.9950 | NodesigGWMTPResume | The Message Transfer Protocol resumed | ||
| 1.3.6.1.4.1.2858.4.9951 | NodesigGWTaskActive | A signaling task started | ||
| 1.3.6.1.4.1.2858.4.9952 | NodepinSuspended | An account was suspended | ||
| 1.3.6.1.4.1.2858.5 | Nodeclearinghouse | |||
| 1.3.6.1.4.1.2858.6 | NodegwControl | |||
| 1.3.6.1.4.1.2858.6.1 | ScalargwControlVal | read-write | mandatory | Controls Clarent Gateway |
| 1.3.6.1.4.1.2858.6.2 | ScalartrapParm1 | read-write | mandatory | Allows traps to have integer parameters |
| 1.3.6.1.4.1.2858.6.3 | ScalartrapParm2 | read-write | mandatory | Allows traps to have integer parameters |
| 1.3.6.1.4.1.2858.6.4 | ScalartrapParm3 | read-write | mandatory | Allows traps to have integer parameters |
| 1.3.6.1.4.1.2858.6.5 | ScalartrapParm4 | read-write | mandatory | Allows traps to have string parameters |
| 1.3.6.1.4.1.2858.6.6 | Scalarclarentcfg | read-write | mandatory | Private control field |
| 1.3.6.1.4.1.2858.6.7 | ScalarenablePort | read-write | mandatory | Enable the port passed in the varbind. For example, to enable port 9, set the value of this variable to 9. Setting the value of this variable to -1 enables all… |
| 1.3.6.1.4.1.2858.6.8 | ScalardisablePort | read-write | mandatory | Disable the port passed in the varbind. For example, to disable port 11, set the value of this variable to 11. Setting the value of this variable to -1 disable… |
| 1.3.6.1.4.1.2858.6.9 | ScalarhangupPort | read-write | mandatory | Hang up the port passed in the varbind. For example, to hang up port 10, set the value of this variable to 10. Setting the value of this variable to -1 hangs u… |
| 1.3.6.1.4.1.2858.7 | NodeccControl | |||
| 1.3.6.1.4.1.2858.7.1 | ScalarccControlval | read-write | mandatory | Controls Clarent Command Center |
| 1.3.6.1.4.1.2858.8 | Nodegatewayports | |||
| 1.3.6.1.4.1.2858.8.1 | ScalargwNumPhysicalPorts | read-only | mandatory | Number of physical gateway ports present on this system (regardless of their current states) |
| 1.3.6.1.4.1.2858.8.2 | TablegwPortTable | not-accessible | mandatory | A list of gateway port entries. The number of usable ports is governed by the number of licensed ports. |
| 1.3.6.1.4.1.2858.8.2.1 | RowgwPortEntry | not-accessible | mandatory | The status of a port |
| 1.3.6.1.4.1.2858.8.2.1.1 | ColumnportIndex | read-only | mandatory | A unique number for each port, ranging from 0 (zero) to the number of physical ports |
| 1.3.6.1.4.1.2858.8.2.1.2 | ColumnportStatus | read-only | mandatory | Port state |
| 1.3.6.1.4.1.2858.8.2.1.3 | ColumnnumberOfCalls | read-only | mandatory | Number of calls made on the port |
| 1.3.6.1.4.1.2858.8.2.1.4 | ColumnavgHoldTime | read-only | mandatory | Average time per call on the port |
| 1.3.6.1.4.1.2858.8.2.1.5 | ColumnxmitCount | read-only | mandatory | |
| 1.3.6.1.4.1.2858.8.2.1.6 | ColumnrecvCount | read-only | mandatory | |
| 1.3.6.1.4.1.2858.8.2.1.7 | ColumningressTime | read-only | mandatory | Total ingress time, in seconds, on the port |
| 1.3.6.1.4.1.2858.8.2.1.8 | ColumningressCount | read-only | mandatory | Total number of ingress calls on the port |
| 1.3.6.1.4.1.2858.8.2.1.9 | ColumnegressTime | read-only | mandatory | Total egress time, in seconds, on the port |
| 1.3.6.1.4.1.2858.8.2.1.10 | ColumnegressCount | read-only | mandatory | Total number of egress calls on the port |
| 1.3.6.1.4.1.2858.8.2.1.11 | Columnclarentreserved | read-only | mandatory | Reserved |
| 1.3.6.1.4.1.2858.8.2.1.12 | ColumntotalVoiceUsage | read-only | mandatory | Time, in seconds, used for voice calls on the port |
| 1.3.6.1.4.1.2858.8.2.1.13 | Columnvoicecount | read-only | mandatory | Total number of voice calls on the port |
| 1.3.6.1.4.1.2858.8.2.1.14 | ColumntotalFaxUsage | read-only | mandatory | Time, in seconds, used for fax calls on the port |
| 1.3.6.1.4.1.2858.8.2.1.15 | Columnfaxcount | read-only | mandatory | Total number of fax calls on the port |
| 1.3.6.1.4.1.2858.8.2.1.16 | ColumntotalDataUsage | read-only | mandatory | Time, in seconds, used for data transfer/modem calls on the port |
| 1.3.6.1.4.1.2858.8.2.1.17 | Columndatacount | read-only | mandatory | Number of data events on the port |
| 1.3.6.1.4.1.2858.8.2.1.18 | ColumnlinePortState | read-only | mandatory | Line port state |
| 1.3.6.1.4.1.2858.8.2.1.19 | ColumnlinePortLocMState | read-only | mandatory | Local maintenance state of the telephone line to the port |
| 1.3.6.1.4.1.2858.8.2.1.20 | ColumnlinePortRemMState | read-only | mandatory | Remote maintenance state of the telephone line to the port |
| 1.3.6.1.4.1.2858.8.2.1.21 | ColumnipPortState | read-only | mandatory | IP port state |
| 1.3.6.1.4.1.2858.8.2.1.22 | ColumnipPortLocMState | read-only | mandatory | Local maintenance state of the IP connection between gateways |
| 1.3.6.1.4.1.2858.8.2.1.23 | ColumnipPortRemMState | read-only | mandatory | Remote maintenance state of the IP connection between gateways. |
| 1.3.6.1.4.1.2858.8.2.1.24 | ColumnconnectedCalls | read-only | mandatory | Number of calls answered |
| 1.3.6.1.4.1.2858.8.2.1.25 | ColumnremoteChannel | read-only | mandatory | Port number on the remote gateway, if the port is connected |
| 1.3.6.1.4.1.2858.8.2.1.26 | ColumnremoteGWId | read-only | mandatory | ID of the remote gateway, if the port is connected |
| 1.3.6.1.4.1.2858.8.2.1.27 | ColumncurrentHoldTime | read-only | mandatory | Current hold time, in seconds, if the port is connected |
| 1.3.6.1.4.1.2858.8.2.1.28 | ColumncurrentAni | read-only | mandatory | Current ANI, if the port is connected |
| 1.3.6.1.4.1.2858.8.2.1.29 | ColumncurrentDnis | read-only | mandatory | Current DNIS, if the port is connected |
| 1.3.6.1.4.1.2858.9 | Nodegatewaytable | |||
| 1.3.6.1.4.1.2858.9.1 | ScalargwNumAttached | read-only | mandatory | The number of Clarent Gateways currently connected to the Command Center |
| 1.3.6.1.4.1.2858.9.2 | TablegwTable | not-accessible | mandatory | A list of Clarent Gateway entries |
| 1.3.6.1.4.1.2858.9.2.1 | RowgwEntry | not-accessible | mandatory | Clarent Gateway entry |
| 1.3.6.1.4.1.2858.9.2.1.1 | ColumngwId | read-only | mandatory | A unique number for each Clarent Gateway |
| 1.3.6.1.4.1.2858.9.2.1.2 | ColumnserverIpAddr | read-only | mandatory | IP Address of the Clarent Gateway |
| 1.3.6.1.4.1.2858.9.2.1.3 | ColumninServerTable | read-only | mandatory | Whether the gateway is in the SERVER-INFO table |
| 1.3.6.1.4.1.2858.10 | Nodegwtrafficstats | |||
| 1.3.6.1.4.1.2858.10.1 | ScalartotalInterval | read-only | mandatory | Time, in seconds, since any member of the Traffic Stats group was last read |
| 1.3.6.1.4.1.2858.10.2 | ScalartotalEventCount | read-only | mandatory | Total number of events in gateway |
| 1.3.6.1.4.1.2858.10.3 | ScalartotalIngressTime | read-only | mandatory | Total time, in seconds, for ingress traffic |
| 1.3.6.1.4.1.2858.10.4 | ScalartotalIngressCount | read-only | mandatory | Total number of ingress events |
| 1.3.6.1.4.1.2858.10.5 | ScalartotalEgressTime | read-only | mandatory | Total time, in seconds, for egress traffic |
| 1.3.6.1.4.1.2858.10.6 | ScalartotalEgressCount | read-only | mandatory | Total number of egress events |
| 1.3.6.1.4.1.2858.10.7 | ScalartotalFaxTime | read-only | mandatory | Total time, in seconds, for fax traffic |
| 1.3.6.1.4.1.2858.10.8 | ScalartotalFaxCount | read-only | mandatory | Total number of fax events |
| 1.3.6.1.4.1.2858.10.9 | ScalartotalOutSvcTime | read-only | mandatory | Total time, in seconds, that the gateway has been out of service :: Reserved; Not Implemented |
| 1.3.6.1.4.1.2858.10.10 | ScalartotalOutSvcCount | read-only | mandatory | Total number of egress events :: Reserved; Not Implemented |
| 1.3.6.1.4.1.2858.10.11 | ScalartotalDataTime | read-only | mandatory | Total time, in seconds, for data traffic |
| 1.3.6.1.4.1.2858.10.12 | ScalartotalDataCount | read-only | mandatory | Total number of data events |
| 1.3.6.1.4.1.2858.10.13 | ScalartotalVoiceTime | read-only | mandatory | Total time, in seconds, for voice traffic |
| 1.3.6.1.4.1.2858.10.14 | ScalartotalVoiceCount | read-only | mandatory | Total number of voice events |
| 1.3.6.1.4.1.2858.10.15 | ScalartotalConnectCall | read-only | mandatory | Total number of ingress calls that were terminated at a remote gateway |
| 1.3.6.1.4.1.2858.48 | Nodetrap-Parameters | |||
| 1.3.6.1.4.1.2858.48.1 | ScalartrapSeverity | read-only | mandatory | Trap severity |
| 1.3.6.1.4.1.2858.48.2 | ScalartrapClass | read-only | mandatory | Trap class |
| 1.3.6.1.4.1.2858.48.3 | ScalartrapNumber | read-only | mandatory | Class-specific trap number |
| 1.3.6.1.4.1.2858.48.4 | ScalartrapText | read-only | mandatory | Text on a per trap Basis |
| 1.3.6.1.4.1.2858.48.5 | ScalartrapCount | read-only | mandatory | Number of specific traps sent from the agent |
| 1.3.6.1.4.1.2858.48.6 | ScalartrapAppName | read-only | mandatory | Name of the Clarent Application issuing the Trap |
| 1.3.6.1.4.1.2858.48.7 | ScalarthreshHoldName | read-only | mandatory | Name of the Threshold Package being reported on in a ThreshHold Trap |
| 1.3.6.1.4.1.2858.48.8 | ScalarthreshHoldValue | read-only | mandatory | The ThreshHoldValue That is being exceeded or rearmed |
| 1.3.6.1.4.1.2858.48.9 | ScalarcurrentValue | read-only | mandatory | The current value of the paramater that has exceeded or rearmed the threshHold in the ThreshHold Trap |
| 1.3.6.1.4.1.2858.48.10 | ScalarthreshHoldAction | read-only | mandatory | ThreshHold Action |
| 1.3.6.1.4.1.2858.100 | Nodemgt | |||
| 1.3.6.1.4.1.2858.100.1 | NodepackageManagement | |||
| 1.3.6.1.4.1.2858.100.1.1 | ScalarnumPackages | read-only | mandatory | Number of packages on a Clarent Network Element. |
| 1.3.6.1.4.1.2858.100.1.2 | TablepackageTable | not-accessible | mandatory | A list of package entries |
| 1.3.6.1.4.1.2858.100.1.2.1 | RowpackageEntry | not-accessible | mandatory | Package status entry |
| 1.3.6.1.4.1.2858.100.1.2.1.1 | ColumnpackageName | read-only | mandatory | Unique name of the package |
| 1.3.6.1.4.1.2858.100.1.2.1.2 | ColumnpackageStatus | read-only | mandatory | Package status |
| 1.3.6.1.4.1.2858.100.1.2.1.3 | ColumndownloadStatus | read-only | mandatory | Package download status |
| 1.3.6.1.4.1.2858.100.1.2.1.4 | ColumndownloadMessage | read-only | mandatory | Package download status message |
| 1.3.6.1.4.1.2858.100.1.2.1.5 | ColumndownloadError | read-only | mandatory | Package download error |
| 1.3.6.1.4.1.2858.100.1.2.1.6 | ColumnunpackStatus | read-only | mandatory | Package unpack status |
| 1.3.6.1.4.1.2858.100.1.2.1.7 | ColumnunpackMessage | read-only | mandatory | Package unpack status message |
| 1.3.6.1.4.1.2858.100.1.2.1.8 | ColumnunpackError | read-only | mandatory | Package unpack error |
| 1.3.6.1.4.1.2858.100.1.2.1.9 | ColumninstallStatus | read-only | mandatory | Package install status |
| 1.3.6.1.4.1.2858.100.1.2.1.10 | ColumninstallMessage | read-only | mandatory | Package install status message |
| 1.3.6.1.4.1.2858.100.1.2.1.11 | ColumninstallError | read-only | mandatory | Package install error |
| 1.3.6.1.4.1.2858.100.1.2.1.12 | ColumnprepareStatus | read-only | mandatory | Package prepare status |
| 1.3.6.1.4.1.2858.100.1.2.1.13 | ColumnprepareMessage | read-only | mandatory | Package prepare status message |
| 1.3.6.1.4.1.2858.100.1.2.1.14 | ColumnprepareError | read-only | mandatory | Package prepare error |
| 1.3.6.1.4.1.2858.100.1.2.1.15 | ColumncommitStatus | read-only | mandatory | Package commit status |
| 1.3.6.1.4.1.2858.100.1.2.1.16 | ColumncommitMessage | read-only | mandatory | Package commit status message |
| 1.3.6.1.4.1.2858.100.1.2.1.17 | ColumncommitError | read-only | mandatory | Package commit error |
| 1.3.6.1.4.1.2858.100.1.2.1.18 | ColumnabortStatus | read-only | mandatory | Package abort status |
| 1.3.6.1.4.1.2858.100.1.2.1.19 | ColumnabortMessage | read-only | mandatory | Package abort status message |
| 1.3.6.1.4.1.2858.100.1.2.1.20 | ColumnabortError | read-only | mandatory | Package abort error |
| 1.3.6.1.4.1.2858.100.1.2.1.21 | ColumnloadStatus | read-only | mandatory | Package load status |
| 1.3.6.1.4.1.2858.100.1.2.1.22 | ColumnloadMessage | read-only | mandatory | Package load status message |
| 1.3.6.1.4.1.2858.100.1.2.1.23 | ColumnloadError | read-only | mandatory | Package load error |
| 1.3.6.1.4.1.2858.100.1.2.1.24 | ColumndeleteStatus | read-only | mandatory | Package delete status |
| 1.3.6.1.4.1.2858.100.1.2.1.25 | ColumndeleteMessage | read-only | mandatory | Package delete status message |
| 1.3.6.1.4.1.2858.100.1.2.1.26 | ColumndeleteError | read-only | mandatory | Package delete error |
| 1.3.6.1.4.1.2858.100.1.2.1.27 | ColumncommitLevel | read-write | mandatory | Mode of operation in which the package was installed |
| 1.3.6.1.4.1.2858.100.1.3 | ScalardownLoadCommand | read-write | mandatory | Initiate a DOWNLOAD command. In the SET command, specify the package name. |
| 1.3.6.1.4.1.2858.100.1.4 | ScalarunpackCommand | read-write | mandatory | Initiate an UNPACK command. In the SET command, specify the package name. |
| 1.3.6.1.4.1.2858.100.1.5 | ScalarinstallCommand | read-write | mandatory | Initiate an INSTALL command. In the SET command, specify the package name. |
| 1.3.6.1.4.1.2858.100.1.6 | ScalarprepareCommand | read-write | mandatory | Initiate a PREPARE command. In the SET command, specify the package name. |
| 1.3.6.1.4.1.2858.100.1.7 | ScalarcommitCommand | read-write | mandatory | Initiate a COMMIT command. In the SET command, specify the package name. |
| 1.3.6.1.4.1.2858.100.1.8 | ScalarabortCommand | read-write | mandatory | Initiate an ABORT command. In the SET command, specify the package name. |
| 1.3.6.1.4.1.2858.100.1.9 | ScalarloadCommand | read-write | mandatory | Initiate a LOAD command. In the SET command, specify the package name. |
| 1.3.6.1.4.1.2858.100.1.10 | ScalarbaseURL | read-write | mandatory | Use this variable to set/get the BASE URL, which is a well-known URL identifying the location from which packages are downloaded. |
| 1.3.6.1.4.1.2858.100.1.11 | ScalardeleteCommand | read-write | mandatory | Initiate a DELETE command. In the SET command, specify the package name. |
| 1.3.6.1.4.1.2858.100.1.99999 | ScalarpackageOperation | read-write | mandatory | List of allowed package operations |
| 1.3.6.1.4.1.2858.100.2 | NodegwStatisticsManagement | |||
| 1.3.6.1.4.1.2858.100.2.1 | ScalargwEnableStats | read-write | mandatory | Enables statistics messages from the gateway to the Command Center. Specify a value of 1 to enable statistics. The default value is 0 (zero), which disables st… |
| 1.3.6.1.4.1.2858.100.2.2 | ScalargwStatsInterval | read-write | mandatory | Interval, in minutes, between gateway statistic messages from the gateway to the Command Center |
| 1.3.6.1.4.1.2858.100.3 | NodethroughPacket | |||
| 1.3.6.1.4.1.2858.100.3.1 | NodetpStatus | |||
| 1.3.6.1.4.1.2858.100.3.1.1 | Scalartpstatus | read-only | mandatory | Current status of the Clarent ThroughPacket server |
| 1.3.6.1.4.1.2858.100.3.1.2 | ScalartpstatusCode | read-only | mandatory | If tpstatus is inError, interrogate this variable for more information. |
| 1.3.6.1.4.1.2858.100.3.1.3 | ScalartpOperState | read-only | mandatory | State of the TP, enabled means running, disabled means not running |
| 1.3.6.1.4.1.2858.100.3.2 | NodetpConfig | |||
| 1.3.6.1.4.1.2858.100.3.2.1 | ScalarpriCCIPAddress | read-write | mandatory | IP address of the primary Command Center for the Clarent ThroughPacket server |
| 1.3.6.1.4.1.2858.100.3.2.2 | ScalarccPortNumber | read-write | mandatory | Port number of the Command Center for the Clarent ThroughPacket server |
| 1.3.6.1.4.1.2858.100.3.2.3 | ScalarsecCCIPAddress | read-write | mandatory | IP address of the secondary Command Center for the Clarent ThroughPacket server |
| 1.3.6.1.4.1.2858.100.3.2.4 | ScalartpConfigCommand | read-write | mandatory | Use this variable to issue commands to the Clarent ThroughPacket server |
| 1.3.6.1.4.1.2858.100.3.2.5 | ScalartpRunTimeCtrl | read-write | mandatory | Start or stop the Clarent ThroughPacket server |
| 1.3.6.1.4.1.2858.100.3.3 | NodetpStatisticsManagement | |||
| 1.3.6.1.4.1.2858.100.3.3.1 | ScalartpEnableStats | read-write | mandatory | Enables statistics messages from Clarent ThroughPacket to the Command Center. Specify a value of 1 to enable statistics. The default value is 0 (zero), which d… |
| 1.3.6.1.4.1.2858.100.3.3.2 | ScalartpStatsInterval | read-write | mandatory | Interval, in minutes, between statistics messages from Clarent ThroughPacket to the Command Center |
| 1.3.6.1.4.1.2858.100.4 | NodeprocManagement | |||
| 1.3.6.1.4.1.2858.100.4.1 | ScalarautoGWRestart | read-write | mandatory | Enable SNMP Agent to automatically restart the GW |
| 1.3.6.1.4.1.2858.100.4.2 | ScalarautoCCRestart | read-write | mandatory | Enable SNMP Agent to automatically restart the GW |
| 1.3.6.1.4.1.2858.100.4.3 | ScalarautoTPRestart | read-write | mandatory | Enable SNMP Agent to automatically restart the GW |
| 1.3.6.1.4.1.2858.100.4.4 | ScalarautoDMRestart | read-write | mandatory | Enable SNMP Agent to automatically restart the DM |
| 1.3.6.1.4.1.2858.100.4.5 | ScalarautoGKRestart | read-write | mandatory | Enable SNMP Agent to automatically restart the GK |
| 1.3.6.1.4.1.2858.100.4.6 | ScalarautoCAMRestart | read-write | mandatory | Enable SNMP Agent to automatically restart the CAM |
| 1.3.6.1.4.1.2858.100.5 | NodeversionManagement | |||
| 1.3.6.1.4.1.2858.100.5.1 | TableversionTable | not-accessible | mandatory | A list of Version entries |
| 1.3.6.1.4.1.2858.100.5.1.1 | RowversionEntry | not-accessible | mandatory | Version Table Entry containing version component information |
| 1.3.6.1.4.1.2858.100.5.1.1.1 | Columncomponent | read-only | mandatory | Name of Clarent Component that is versioned |
| 1.3.6.1.4.1.2858.100.5.1.1.2 | ColumnmajorVersion | read-only | mandatory | Major Release Version Number |
| 1.3.6.1.4.1.2858.100.5.1.1.3 | ColumnminorVersion | read-only | mandatory | Minor Release Version Number |
| 1.3.6.1.4.1.2858.100.5.1.1.4 | ColumnbuildMajorVersion | read-only | mandatory | Build Major Release Version Number |
| 1.3.6.1.4.1.2858.100.5.1.1.5 | ColumnbuildMinorVersion | read-only | mandatory | Major Release Version Number |
| 1.3.6.1.4.1.2858.100.5.1.1.6 | ColumnversionString | read-only | mandatory | Version in String Format |
| 1.3.6.1.4.1.2858.100.6 | NodecSysManagement | |||
| 1.3.6.1.4.1.2858.100.6.1 | NodecSysStatus | |||
| 1.3.6.1.4.1.2858.100.6.1.1 | ScalarcSystemStatus | read-only | mandatory | Current status of the Clarent Network Element, if state is shutdownAllowed it means that an enableShutdown down operation has been received. At this point a st… |
| 1.3.6.1.4.1.2858.100.6.1.2 | ScalarcSystemError | read-only | mandatory | Error Code reflected from system |
| 1.3.6.1.4.1.2858.100.6.2 | NodecSysControl | |||
| 1.3.6.1.4.1.2858.100.6.2.1 | ScalarcSysOperation | read-write | mandatory | User can reboot the system by issuing an enableShutdown operation followed by a startShutdown operation. When the system is enabled for shutdown the clarent sh… |
| 1.3.6.1.4.1.2858.100.20 | NodecGatekeeper | |||
| 1.3.6.1.4.1.2858.100.20.1 | NodecGkStatus | |||
| 1.3.6.1.4.1.2858.100.20.1.1 | ScalargkPortInUseCount | read-only | mandatory | Number of ports currently in use |
| 1.3.6.1.4.1.2858.100.20.1.2 | ScalargkOpState | read-only | mandatory | Clarent Gatekeeper operational state |
| 1.3.6.1.4.1.2858.100.20.1.3 | ScalargkAltGKList | read-only | mandatory | Alternate gatekeeper list |
| 1.3.6.1.4.1.2858.100.20.1.4 | ScalargkLoadState | read-only | mandatory | Clarent Gatekeeper load state |
| 1.3.6.1.4.1.2858.100.20.1.5 | ScalargkCCConnState | read-only | mandatory | Gatekeeper-to-Command Center connection state |
| 1.3.6.1.4.1.2858.100.20.1.6 | TablegkCallStatsTable | not-accessible | mandatory | List of call statistics for all call port types |
| 1.3.6.1.4.1.2858.100.20.1.6.1 | RowgkCallStatsEntry | not-accessible | mandatory | Entry in the CallStatsTable for a given call port type |
| 1.3.6.1.4.1.2858.100.20.1.6.1.1 | ColumngkCallPortType | read-only | mandatory | List of call port types. Call port types are: TOTAL, a call from any combination of call port types H323H323, an H.323 gateway-to-H.323 gateway call H323CLAREN… |
| 1.3.6.1.4.1.2858.100.20.1.6.1.2 | ColumngkNumberOfCalls | read-only | mandatory | Number of call attempts for a given call port type |
| 1.3.6.1.4.1.2858.100.20.1.6.1.3 | ColumngkCallTime | read-only | mandatory | Amount of time, in seconds, for calls of a given call port type |
| 1.3.6.1.4.1.2858.100.20.1.6.1.4 | ColumngkAverageHoldTime | read-only | mandatory | Average hold time for calls of a given call port type |
| 1.3.6.1.4.1.2858.100.20.1.6.1.5 | ColumngkNumberOfConnectedCalls | read-only | mandatory | Number of call completions for a given call port type |
| 1.3.6.1.4.1.2858.100.20.2 | NodecGkConfig | |||
| 1.3.6.1.4.1.2858.100.20.2.1 | ScalargkName | read-write | mandatory | Clarent Gatekeeper name |
| 1.3.6.1.4.1.2858.100.20.2.2 | ScalargkIPAddr | read-write | mandatory | IP address of Clarent Gatekeeper |
| 1.3.6.1.4.1.2858.100.20.2.3 | ScalargkExternalIPAddr | read-write | mandatory | IP address by which Clarent Gatekeeper is known to outside entities |
| 1.3.6.1.4.1.2858.100.20.2.4 | ScalargkCCUDPPort | read-write | mandatory | UDP port through which Clarent Command Center communicates with Clarent Gatekeeper |
| 1.3.6.1.4.1.2858.100.20.2.5 | ScalargkPrimaryCCCIPAddr | read-write | mandatory | IP address of primary Command Center |
| 1.3.6.1.4.1.2858.100.20.2.6 | ScalargkSecCCCIPAddr | read-write | mandatory | IP address of secondary Command Center |
| 1.3.6.1.4.1.2858.100.20.2.7 | ScalargkServiceLpdFilePath | read-write | mandatory | Location of telephone user interface, or Line Port Director (LPD) file |
| 1.3.6.1.4.1.2858.100.20.2.8 | ScalargkDebugFilePath | read-write | mandatory | Path to Clarent Gatekeeper trace configuration file |
| 1.3.6.1.4.1.2858.100.20.2.9 | ScalargkLogFileEnable | read-write | mandatory | Enable or disable file logging |
| 1.3.6.1.4.1.2858.100.20.2.10 | ScalargkLogFileDir | read-write | mandatory | Directory in which Clarent Gatekeeper saves log files |
| 1.3.6.1.4.1.2858.100.20.2.11 | ScalargkLogFileAppendString | read-write | mandatory | Character string to append to Clarent Gatekeeper log file names |
| 1.3.6.1.4.1.2858.100.20.2.12 | ScalargkLogFileRolloverSize | read-write | mandatory | Size, in kilobytes, to which Clarent Gatekeeper allows a log file to grow before closing a log and starting another |
| 1.3.6.1.4.1.2858.100.20.2.13 | ScalargkLogFileMaxNumFiles | read-write | mandatory | Maximum number of log files Clarent Gatekeeper creates before overwriting existing logs |
| 1.3.6.1.4.1.2858.100.20.2.14 | ScalargkSysLogEnable | read-write | mandatory | Enable or disable logging to a system logging (syslog) daemon process running on another computer |
| 1.3.6.1.4.1.2858.100.20.2.15 | ScalargkSysLogIpAddr | read-write | mandatory | IP address of a system logging (syslog) daemon server |
| 1.3.6.1.4.1.2858.100.20.2.16 | ScalargkGroup | read-write | mandatory | Group to which Clarent Gatekeeper belongs |
| 1.3.6.1.4.1.2858.100.20.2.17 | ScalargkPriority | read-write | mandatory | Priority of this Clarent Gatekeeper in the alternate gatekeeper list |
| 1.3.6.1.4.1.2858.100.20.2.18 | ScalargkRasKeepAliveTimer | read-write | mandatory | Amount of time, in seconds, that an H.323 gateway must register with Clarent Gatekeeper. Default = 25, miniumum = 0, maximum = 120. |
| 1.3.6.1.4.1.2858.100.20.2.19 | ScalargkCCCKeepAliveTimer | read-write | mandatory | How often, in seconds, Clarent Gatekeeper checks its connection with the Command Center. Default = 10, minimum = 5, maximum = 120 |
| 1.3.6.1.4.1.2858.100.20.2.20 | ScalargkAdminState | read-write | mandatory | Command object to shut down Gatekeeper gracefully or forcefully |
| 1.3.6.1.4.1.2858.100.20.2.21 | ScalargkGracefulShutdownPeriod | read-write | mandatory | Number of minutes to wait before shutting down Clarent Gatekeeper gracefully |
| 1.3.6.1.4.1.2858.100.20.3 | NodecGkStatisticsManagement | |||
| 1.3.6.1.4.1.2858.100.20.100 | Nodeclarent-gktraps | |||
| 1.3.6.1.4.1.2858.100.20.100.1 | NodegkIsDown | Clarent Gatekeeper is down | ||
| 1.3.6.1.4.1.2858.100.20.100.2 | NodegkRestartFailed | Clarent Gatekeeper failed to restart | ||
| 1.3.6.1.4.1.2858.100.20.100.3 | NodegkRestarted | Clarent Gatekeeper restarted successfully | ||
| 1.3.6.1.4.1.2858.100.20.100.4 | NodegkNotRegistered | Clarent Gatekeeper cannot register with the Command Center | ||
| 1.3.6.1.4.1.2858.100.20.100.5 | NodegkOpStateChg | Clarent Gatekeeper changed operational state. Operational states are: disabled (0), enabled (1). | ||
| 1.3.6.1.4.1.2858.100.20.100.6 | NodegkLoadStateCritical | Clarent Gatekeeper load state is critical. Load states are: Minimal (0), Light (1), Medium (2), Heavy (3), Dangerously Heavy (4), and Critical (5). | ||
| 1.3.6.1.4.1.2858.100.20.100.7 | NodegkIsRejectingRasMsg | Clarent Gatekeeper started rejecting H.225 RAS messages. Clarent::For Future Release | ||
| 1.3.6.1.4.1.2858.100.20.100.8 | NodegkEndpointUnreachable | Endpoint stopped sending keepalive messages to Clarent Gatekeeper | ||
| 1.3.6.1.4.1.2858.100.20.100.9 | NodegkEndPointURQFailed | Endpoint attempted to unregister but has active calls |