CLIENT-MIB
101 objects
No module-level DESCRIPTION found.
Imported Objects
| HOST-RESOURCES-MIB | Boolean DateAndTime InternationalDisplayString KBytes ProductID |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter TimeTicks |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2 | Nodeibm | |||
| 1.3.6.1.4.1.2.6 | NodeibmProd | |||
| 1.3.6.1.4.1.2.6.50 | NodeclientMgmtSubAgent | |||
| 1.3.6.1.4.1.2.6.50.1 | NodeclntSystem | |||
| 1.3.6.1.4.1.2.6.50.1.1 | TableclntSystemTable | not-accessible | mandatory | The (conceptual) table of client system information. |
| 1.3.6.1.4.1.2.6.50.1.1.1 | RowclntSystemEntry | not-accessible | mandatory | A (conceptual) entry for one logical entry of client system information. |
| 1.3.6.1.4.1.2.6.50.1.1.1.1 | ColumnclntSystemIndex | read-only | mandatory | A unique value for each client node known to the host. |
| 1.3.6.1.4.1.2.6.50.1.1.1.2 | ColumnclntSysName | read-only | mandatory | An administratively assigned name for the client node. By convention, this is the client's fully qualified domain name. |
| 1.3.6.1.4.1.2.6.50.1.1.1.3 | ColumnclntSysDescr | read-only | mandatory | A textual description of the client. This value should include the full name and version identification of the system's hardware type, software operating syste… |
| 1.3.6.1.4.1.2.6.50.1.1.1.4 | ColumnclntCommunity | read-only | mandatory | Name of the community defined by the client. |
| 1.3.6.1.4.1.2.6.50.1.1.1.5 | ColumnclntIpAddress | read-only | mandatory | An administratively assigned address for the client node. This is the Internet Address for the client. |
| 1.3.6.1.4.1.2.6.50.1.1.1.6 | ColumnclntAppnCpNetId | read-only | mandatory | An administratively assigned address for the client node. This is the control point name and network ID. |
| 1.3.6.1.4.1.2.6.50.1.1.1.7 | ColumnclntMemorySize | read-only | mandatory | The amount of physical main memory contained by the client. |
| 1.3.6.1.4.1.2.6.50.1.1.1.8 | ColumnclntSystemUpTime | read-only | mandatory | The amount of time since the client was last initialized. |
| 1.3.6.1.4.1.2.6.50.1.1.1.9 | ColumnclntSystemStatus | read-only | mandatory | A status indication for the client. |
| 1.3.6.1.4.1.2.6.50.1.1.1.10 | ColumnclntSupportMibII | read-only | mandatory | An indication that the client supports MIB-2 objects. |
| 1.3.6.1.4.1.2.6.50.1.1.1.11 | ColumnclntSupportHostMib | read-only | mandatory | An indication that the client supports Host Resources MIB objects. |
| 1.3.6.1.4.1.2.6.50.1.1.1.12 | ColumnclntSupportAppnMib | read-only | mandatory | An indication that the client supports APPN MIB objects. |
| 1.3.6.1.4.1.2.6.50.1.1.1.13 | ColumnclntSupportDmiMib | read-only | mandatory | An indication that the client supports DMI MIB objects. |
| 1.3.6.1.4.1.2.6.50.1.1.1.14 | ColumnclntLastHwRefresh | read-only | mandatory | The last date at which the hardware information was refreshed for the client. If this information is not known, then this variable shall have the value corresp… |
| 1.3.6.1.4.1.2.6.50.1.1.1.15 | ColumnclntLastSwRefresh | read-only | mandatory | The last date at which the software information was refreshed for the client. If this information is not known, then this variable shall have the value corresp… |
| 1.3.6.1.4.1.2.6.50.1.1.1.16 | ColumnclntSysContact | read-only | mandatory | The textual identification of the contact person for the client, together with information on how to contact the person. |
| 1.3.6.1.4.1.2.6.50.1.1.1.17 | ColumnclntSysLocation | read-only | mandatory | The physical location of the client (e.g., building, floor, telephone...). |
| 1.3.6.1.4.1.2.6.50.1.1.1.18 | ColumnclntMachineType | read-only | mandatory | The machine type of the client. |
| 1.3.6.1.4.1.2.6.50.1.1.1.19 | ColumnclntMachineModel | read-only | mandatory | The machine model of the client. |
| 1.3.6.1.4.1.2.6.50.1.1.1.20 | ColumnclntUserProfile | read-only | mandatory | The user profile for the client. |
| 1.3.6.1.4.1.2.6.50.1.1.1.21 | ColumnclntOwner | read-only | mandatory | The owner of the client. |
| 1.3.6.1.4.1.2.6.50.1.1.1.22 | ColumnclntOwnerPhone | read-only | mandatory | The owner's phone number for the client. |
| 1.3.6.1.4.1.2.6.50.1.1.1.23 | ColumnclntOwnerOffice | read-only | mandatory | The owner's office information for the client. |
| 1.3.6.1.4.1.2.6.50.2 | NodeclntHardware | |||
| 1.3.6.1.4.1.2.6.50.2.1 | TableclntStorageTable | not-accessible | mandatory | The (conceptual) table of logical storage areas on the client. An entry shall be placed in the storage table for each logical area of storage that is allocated… |
| 1.3.6.1.4.1.2.6.50.2.1.1 | RowclntStorageEntry | not-accessible | mandatory | A (conceptual) entry for one logical storage area on the client. The clntSystemIndex represents an entry in the clntSystemTable that corresponds to the clntSto… |
| 1.3.6.1.4.1.2.6.50.2.1.1.1 | ColumnclntStorageIndex | read-only | mandatory | A unique value for each logical storage area contained by the client. |
| 1.3.6.1.4.1.2.6.50.2.1.1.2 | ColumnclntStorageType | read-only | mandatory | The type of storage represented by this entry. |
| 1.3.6.1.4.1.2.6.50.2.1.1.3 | ColumnclntStorageDescr | read-only | mandatory | A description of the type and instance of the storage described by this entry. |
| 1.3.6.1.4.1.2.6.50.2.1.1.4 | ColumnclntStorageAllocationUnits | read-only | mandatory | The size, in bytes, of the data objects allocated from this pool. If this entry is monitoring sectors, blocks, buffers, or packets, for example, this number wi… |
| 1.3.6.1.4.1.2.6.50.2.1.1.5 | ColumnclntStorageSize | read-only | mandatory | The size of the storage represented by this entry, in units of clntStorageAllocationUnits. |
| 1.3.6.1.4.1.2.6.50.2.1.1.6 | ColumnclntStorageUsed | read-only | mandatory | The amount of the storage represented by this entry that is allocated, in units of clntStorageAllocationUnits. |
| 1.3.6.1.4.1.2.6.50.2.1.1.7 | ColumnclntStorageAllocationFailures | read-only | mandatory | The number of requests for storage represented by this entry that could not be honored due to not enough storage. It should be noted that as this object has a … |
| 1.3.6.1.4.1.2.6.50.2.2 | TableclntDeviceTable | not-accessible | mandatory | The (conceptual) table of devices contained by the client. |
| 1.3.6.1.4.1.2.6.50.2.2.1 | RowclntDeviceEntry | not-accessible | mandatory | A (conceptual) entry for one device contained by the client. |
| 1.3.6.1.4.1.2.6.50.2.2.1.1 | ColumnclntDeviceIndex | read-only | mandatory | A unique value for each device contained by the client. The value for each device must remain constant at least from one re-initialization of the agent to the … |
| 1.3.6.1.4.1.2.6.50.2.2.1.2 | ColumnclntDeviceType | read-only | mandatory | An indication of the type of device. If this value is 'hrDeviceProcessor { hrDeviceTypes 3 }' then an entry exists in the clntProcessorTable which corresponds … |
| 1.3.6.1.4.1.2.6.50.2.2.1.3 | ColumnclntDeviceDescr | read-only | mandatory | A textual description of this device, including the device's manufacturer and revision, and optionally, its serial number. |
| 1.3.6.1.4.1.2.6.50.2.2.1.4 | ColumnclntDeviceID | read-only | mandatory | The product ID for this device. |
| 1.3.6.1.4.1.2.6.50.2.2.1.5 | ColumnclntDeviceStatus | read-only | mandatory | The current operational state of the device described by this row of the table. A value unknown(1) indicates that the current state of the device is unknown. r… |
| 1.3.6.1.4.1.2.6.50.2.2.1.6 | ColumnclntDeviceErrors | read-only | mandatory | The number of errors detected on this device. It should be noted that as this object has a SYNTAX of Counter, that it does not have a defined initial value. Ho… |
| 1.3.6.1.4.1.2.6.50.2.3 | TableclntProcessorTable | not-accessible | mandatory | The (conceptual) table of processors contained by the client. Note that this table is potentially sparse: a (conceptual) entry exists only if the correspondent… |
| 1.3.6.1.4.1.2.6.50.2.3.1 | RowclntProcessorEntry | not-accessible | mandatory | A (conceptual) entry for one processor contained by the client. The clntSystemIndex, which represents an entry in the clntSystemTable, and the clntDeviceIndex,… |
| 1.3.6.1.4.1.2.6.50.2.3.1.1 | ColumnclntProcessorFrwID | read-only | mandatory | The product ID of the firmware associated with the processor. |
| 1.3.6.1.4.1.2.6.50.2.3.1.2 | ColumnclntProcessorLoad | read-only | mandatory | The average, over the last minute, of the percentage of time that this processor was not idle. |
| 1.3.6.1.4.1.2.6.50.2.4 | TableclntNetworkTable | not-accessible | mandatory | The (conceptual) table of network devices contained by the client. Note that this table is potentially sparse: a (conceptual) entry exists only if the correspo… |
| 1.3.6.1.4.1.2.6.50.2.4.1 | RowclntNetworkEntry | not-accessible | mandatory | A (conceptual) entry for one network device contained by the client. The clntSystemIndex, which represents an entry in the clntSystemTable, and the clntDeviceI… |
| 1.3.6.1.4.1.2.6.50.2.4.1.1 | ColumnclntNetworkIfIndex | read-only | mandatory | The value of ifIndex which corresponds to this network device. |
| 1.3.6.1.4.1.2.6.50.2.5 | TableclntPrinterTable | not-accessible | mandatory | The (conceptual) table of printers local to the client. Note that this table is potentially sparse: a (conceptual) entry exists only if the correspondent value… |
| 1.3.6.1.4.1.2.6.50.2.5.1 | RowclntPrinterEntry | not-accessible | mandatory | A (conceptual) entry for one printer local to the client. The clntSystemIndex, which represents an entry in the clntSystemTable, and the clntDeviceIndex, which… |
| 1.3.6.1.4.1.2.6.50.2.5.1.1 | ColumnclntPrinterStatus | read-only | mandatory | The current status of this printer device. When in the idle(3), printing(4), or warmup(5) state, the corresponding clntDeviceStatus should be running(2) or war… |
| 1.3.6.1.4.1.2.6.50.2.5.1.2 | ColumnclntPrinterDetectedErrorState | read-only | mandatory | This object represents any error conditions detected by the printer. The error conditions are encoded as bits in an octet string, with the following definition… |
| 1.3.6.1.4.1.2.6.50.2.6 | TableclntDiskStorageTable | not-accessible | mandatory | The (conceptual) table of long-term storage devices contained by the client. In particular, disk devices accessed remotely over a network are not included here… |
| 1.3.6.1.4.1.2.6.50.2.6.1 | RowclntDiskStorageEntry | not-accessible | mandatory | A (conceptual) entry for one long-term storage device contained by the client. The clntSystemIndex, which represents an entry in the clntSystemTable, and the c… |
| 1.3.6.1.4.1.2.6.50.2.6.1.1 | ColumnclntDiskStorageAccess | read-only | mandatory | An indication if this long-term storage device is readable and writable or only readable. This should reflect the media type, any write protect mechanism, and … |
| 1.3.6.1.4.1.2.6.50.2.6.1.2 | ColumnclntDiskStorageMedia | read-only | mandatory | An indication of the type of media used in this long-term storage device. |
| 1.3.6.1.4.1.2.6.50.2.6.1.3 | ColumnclntDiskStorageRemoveble | read-only | mandatory | Denotes whether or not the disk media may be removed from the drive. |
| 1.3.6.1.4.1.2.6.50.2.6.1.4 | ColumnclntDiskStorageCapacity | read-only | mandatory | The total size for this long-term storage device. |
| 1.3.6.1.4.1.2.6.50.2.7 | TableclntPartitionTable | not-accessible | mandatory | The (conceptual) table of partitions for long-term storage devices contained by the client. In particular, partitions accessed remotely over a network are not … |
| 1.3.6.1.4.1.2.6.50.2.7.1 | RowclntPartitionEntry | not-accessible | mandatory | A (conceptual) entry for one partition. The clntSystemIndex, which represents an entry in the clntSystemTable, and the clntDeviceIndex, which represents an ent… |
| 1.3.6.1.4.1.2.6.50.2.7.1.1 | ColumnclntPartitionIndex | read-only | mandatory | A unique value for each partition on this long- term storage device. The value for each long-term storage device must remain constant at least from one re-init… |
| 1.3.6.1.4.1.2.6.50.2.7.1.2 | ColumnclntPartitionLabel | read-only | mandatory | A textual description of this partition. |
| 1.3.6.1.4.1.2.6.50.2.7.1.3 | ColumnclntPartitionID | read-only | mandatory | A descriptor which uniquely represents this partition to the responsible operating system. On some systems, this might take on a binary representation. |
| 1.3.6.1.4.1.2.6.50.2.7.1.4 | ColumnclntPartitionSize | read-only | mandatory | The size of this partition. |
| 1.3.6.1.4.1.2.6.50.2.7.1.5 | ColumnclntPartitionFSIndex | read-only | mandatory | The index of the file system mounted on this partition. If no file system is mounted on this partition, then this value shall be zero. Note that multiple parti… |
| 1.3.6.1.4.1.2.6.50.2.8 | TableclntFSTable | not-accessible | mandatory | The (conceptual) table of file systems local to this client or remotely mounted from a file server. File systems that are in only one user's environment on a m… |
| 1.3.6.1.4.1.2.6.50.2.8.1 | RowclntFSEntry | not-accessible | mandatory | A (conceptual) entry for one file system local to this client or remotely mounted from a file server. File systems that are in only one user's environment on a… |
| 1.3.6.1.4.1.2.6.50.2.8.1.1 | ColumnclntFSIndex | read-only | mandatory | A unique value for each file system local to this client. The value for each file system must remain constant at least from one re-initialization of the agent … |
| 1.3.6.1.4.1.2.6.50.2.8.1.2 | ColumnclntFSMountPoint | read-only | mandatory | The path name of the root of this file system. |
| 1.3.6.1.4.1.2.6.50.2.8.1.3 | ColumnclntFSRemoteMountPoint | read-only | mandatory | A description of the name and/or address of the server that this file system is mounted from. This may also include parameters such as the mount point on the r… |
| 1.3.6.1.4.1.2.6.50.2.8.1.4 | ColumnclntFSType | read-only | mandatory | The value of this object identifies the type of this file system. |
| 1.3.6.1.4.1.2.6.50.2.8.1.5 | ColumnclntFSAccess | read-only | mandatory | An indication if this file system is logically configured by the operating system to be readable and writable or only readable. This does not represent any loc… |
| 1.3.6.1.4.1.2.6.50.2.8.1.6 | ColumnclntFSBootable | read-only | mandatory | A flag indicating whether this file system is bootable. |
| 1.3.6.1.4.1.2.6.50.2.8.1.7 | ColumnclntFSStorageIndex | read-only | mandatory | The index of the clntStorageEntry that represents information about this file system. If there is no such information available, then this value shall be zero.… |
| 1.3.6.1.4.1.2.6.50.2.8.1.8 | ColumnclntFSLastFullBackupDate | read-write | mandatory | The last date at which this complete file system was copied to another storage device for backup. This information is useful for ensuring that backups are bein… |
| 1.3.6.1.4.1.2.6.50.2.8.1.9 | ColumnclntFSLastPartialBackupDate | read-write | mandatory | The last date at which a portion of this file system was copied to another storage device for backup. This information is useful for ensuring that backups are … |
| 1.3.6.1.4.1.2.6.50.3 | NodeclntSoftware | |||
| 1.3.6.1.4.1.2.6.50.3.1 | TableclntSWInstalledTable | not-accessible | mandatory | The (conceptual) table of software installed on the client. |
| 1.3.6.1.4.1.2.6.50.3.1.1 | RowclntSWInstalledEntry | not-accessible | mandatory | A (conceptual) entry for a piece of software installed on the client. The clntSystemIndex represents an entry in the clntSystemTable that corresponds to the cl… |
| 1.3.6.1.4.1.2.6.50.3.1.1.1 | ColumnclntSWInstalledIndex | read-only | mandatory | A unique value for each piece of software installed on the client. |
| 1.3.6.1.4.1.2.6.50.3.1.1.2 | ColumnclntSWInstalledManf | read-only | mandatory | A textual description of the manufacturer for this installed piece of software. If this information is not known, this string should have a length of zero. |
| 1.3.6.1.4.1.2.6.50.3.1.1.3 | ColumnclntSWInstalledID | read-only | mandatory | The product ID of this installed piece of software. |
| 1.3.6.1.4.1.2.6.50.3.1.1.4 | ColumnclntSWInstalledVersion | read-only | mandatory | The version of this installed piece of software. If this information is not known, this string should have a length of zero. |
| 1.3.6.1.4.1.2.6.50.3.1.1.5 | ColumnclntSWInstalledDateTime | read-only | mandatory | The last modification date of this application as it would appear in a directory listing. If this information is not known, then this variable shall have the v… |
| 1.3.6.1.4.1.2.6.50.3.1.1.6 | ColumnclntSWInstalledType | read-only | mandatory | The type of this software. |
| 1.3.6.1.4.1.2.6.50.3.1.1.7 | ColumnclntSWInstalledPath | read-only | mandatory | The path where this piece of software is installed. This should be the fully qualified path on the client. |
| 1.3.6.1.4.1.2.6.50.3.1.1.8 | ColumnclntSWInstalledOption | read-only | mandatory | The option of the software installed. |
| 1.3.6.1.4.1.2.6.50.3.1.1.9 | ColumnclntSWInstalledLoad | read-only | mandatory | The load of the software installed. |
| 1.3.6.1.4.1.2.6.50.3.1.1.10 | ColumnclntSWInstalledStatus | read-only | mandatory | The current state of the software installed. |
| 1.3.6.1.4.1.2.6.50.3.1.1.11 | ColumnclntSWInstalledSoftwareName | read-only | mandatory | The Software Name of this installed piece of software. If this information is not known, this string should have a length of zero. |
| 1.3.6.1.4.1.2.6.50.3.1.1.12 | ColumnclntSWInstalledSerialNumber | read-only | mandatory | The Serial Number of this installed piece of software. If this information is not known, this string should have a length of zero. |
| 1.3.6.1.4.1.2.6.50.3.3 | TableclntSWFixTable | not-accessible | mandatory | The (conceptual) table of software fixes on the client. |
| 1.3.6.1.4.1.2.6.50.3.3.1 | RowclntSWFixEntry | not-accessible | mandatory | A (conceptual) entry for each software fix on the client. The clntSystemIndex, which represents an entry in the clntSystemTable, and the clntSWInstalledIndex, … |
| 1.3.6.1.4.1.2.6.50.3.3.1.1 | ColumnclntSWFixIndex | read-only | mandatory | A unique value for each software fix installed on this client. |
| 1.3.6.1.4.1.2.6.50.3.3.1.2 | ColumnclntSWFixID | read-only | mandatory | A value which identifies a fix to a piece of installed software. |