CMC-MIB
169 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.44 | Nodecmc | |||
| 1.3.6.1.4.1.44.1 | Nodecmc-prod | |||
| 1.3.6.1.4.1.44.1.1 | Nodecmc-adapt | |||
| 1.3.6.1.4.1.44.1.2 | Nodecmc-system | |||
| 1.3.6.1.4.1.44.1.3 | Nodecmc-soft | |||
| 1.3.6.1.4.1.44.2 | Nodecmc-mgmt | |||
| 1.3.6.1.4.1.44.2.1 | Nodecmc-mib | |||
| 1.3.6.1.4.1.44.2.1.4 | Nodecmc-ip | |||
| 1.3.6.1.4.1.44.2.1.4.1 | ScalarcmcIpInAdminDiscards | read-only | mandatory | The number of incoming datagrams dropped due to administrative prohibitions. |
| 1.3.6.1.4.1.44.2.1.4.3 | ScalarcmcIpOutAdminDiscards | read-only | mandatory | The number of outgoing datagrams dropped due to administrative prohibitions. |
| 1.3.6.1.4.1.44.2.1.4.4 | ScalarcmcIpFiltStatus | read-write | mandatory | The status of IP Filtering. |
| 1.3.6.1.4.1.44.2.1.4.5 | TablecmcIpFilterTable | not-accessible | mandatory | A list of IP Filter table entries. |
| 1.3.6.1.4.1.44.2.1.4.5.1 | RowcmcIpFiltEntry | not-accessible | mandatory | An IP Filter table entry containing objects that describe datagram transmission/reception restrictions. Creation of an IP Filter table entry requires the prese… |
| 1.3.6.1.4.1.44.2.1.4.5.1.1 | ColumncmcIpFiltName | read-write | mandatory | Name of filter entry. This is an ASCII string up to 6 octets long. |
| 1.3.6.1.4.1.44.2.1.4.5.1.2 | ColumncmcIpFiltPriority | read-only | mandatory | The priority of the entry. The highest priority entry (1) is searched first. The second highest priority entry (2) is searched next, and so on. |
| 1.3.6.1.4.1.44.2.1.4.5.1.3 | ColumncmcIpFiltSAddr | read-write | mandatory | Source IP address for the filter entry |
| 1.3.6.1.4.1.44.2.1.4.5.1.4 | ColumncmcIpFiltSMask | read-write | mandatory | Source IP mask for the filter entry. |
| 1.3.6.1.4.1.44.2.1.4.5.1.5 | ColumncmcIpFiltSPort | read-write | mandatory | Source port for the filter entry. |
| 1.3.6.1.4.1.44.2.1.4.5.1.6 | ColumncmcIpFiltDAddr | read-write | mandatory | Destination IP address for the filter entry. |
| 1.3.6.1.4.1.44.2.1.4.5.1.7 | ColumncmcIpFiltDMask | read-write | mandatory | Destination IP mask for the filter entry. |
| 1.3.6.1.4.1.44.2.1.4.5.1.8 | ColumncmcIpFiltDPort | read-write | mandatory | Destination port for the filter entry. |
| 1.3.6.1.4.1.44.2.1.4.5.1.9 | ColumncmcIpFiltProto | read-write | mandatory | Protocol to filter. |
| 1.3.6.1.4.1.44.2.1.4.5.1.10 | ColumncmcIpFiltMode | read-write | mandatory | Mode of the filter entry. |
| 1.3.6.1.4.1.44.2.1.4.5.1.11 | ColumncmcIpFiltErrMsg | read-write | mandatory | Configuration object used to control the transmission of ICMP error messages when datagrams are administratively filtered. |
| 1.3.6.1.4.1.44.2.1.4.5.1.12 | ColumncmcIpFiltType | read-write | mandatory | The type of the IP Filter Table entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the cmcIpFilterTab… |
| 1.3.6.1.4.1.44.2.1.4.5.1.13 | ColumncmcIpFiltMoveOper | read-write | mandatory | Configuration object used to move IP Filter table entries (to obtain a different priority for the entry). Parameters are defined as: Octet 0 describes the move… |
| 1.3.6.1.4.1.44.2.1.4.5.1.14 | ColumncmcIpFiltUseCount | read-write | mandatory | The number of times the IP Filter Table entry has been referenced. |
| 1.3.6.1.4.1.44.2.1.4.5.1.15 | ColumncmcIpFiltDirection | read-write | mandatory | The flow direction for the filter entry. |
| 1.3.6.1.4.1.44.2.1.4.5.1.16 | ColumncmcIpFiltIfIndex | read-write | mandatory | The interface index associated with the filter entry. This value is equivalent to the ifIndex object. |
| 1.3.6.1.4.1.44.2.1.5 | Nodecmc-ipx | |||
| 1.3.6.1.4.1.44.2.1.5.1 | Nodecmc-ipx-ipx | |||
| 1.3.6.1.4.1.44.2.1.5.1.1 | Nodecmc-ipx-ipxSystem | |||
| 1.3.6.1.4.1.44.2.1.5.1.1.1 | TableipxSysTable | not-accessible | mandatory | The IPX System table. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1 | RowipxSysEntry | not-accessible | mandatory | Each entry corresponds to one instance of IPX running on the system. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.1 | ColumnipxSysInstance | read-write | mandatory | The unique identifier of the instance of IPX to which this row corresponds. The value may be written only when creating a new entry in the table. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.2 | ColumnipxSysExistState | read-write | mandatory | The validity of this entry in the IPX system table. Setting this field to off indicates that this entry may be deleted from the system table at the IPX impleme… |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.3 | ColumnipxSysIntNetNumExists | read-only | mandatory | Indicates whether this instance of IPX has an internal network number. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.4 | ColumnipxSysIntNetNum | read-write | mandatory | The IPX internal network number of this instance of IPX. This value is undefined if the value of ipxSysIntNetNumExists is no. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.5 | ColumnipxSysName | read-write | mandatory | The readable name for this system. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.6 | ColumnipxSysMaxPathSplits | read-write | mandatory | The maximum number of path with equal routing metric value which this instance of IPX may split between when forwarding packets. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.7 | ColumnipxSysMaxHops | read-write | mandatory | The maximum number of hops a packet may take. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.8 | ColumnipxSysVersionMajor | read-only | mandatory | The major version number of IPX supported. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.9 | ColumnipxSysVersionMinor | read-only | mandatory | The minor version number of IPX supported. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.10 | ColumnipxSysInReceives | read-only | mandatory | The total number of IPX packets received, including those received in error. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.11 | ColumnipxSysInTooManyHops | read-only | mandatory | The number of IPX packets discarded due to exceeding the maximum hop count. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.12 | ColumnipxSysInHdrErrors | read-only | mandatory | The number of IPX packets discarded due to errors in their headers, including any IPX packet with a size less than the minimum of 30 bytes. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.13 | ColumnipxSysInUnknownSockets | read-only | mandatory | The number of IPX packets discarded because the destination socket was not open. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.14 | ColumnipxSysInFiltered | read-only | mandatory | The number of incoming IPX packets discarded due to filtering. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.15 | ColumnipxSysInCompressDiscards | read-only | mandatory | The number of incoming IPX packets discarded due to decompression errors. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.16 | ColumnipxSysInDiscards | read-only | mandatory | The number of IPX packets received but discarded die to processing decision. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.17 | ColumnipxSysInDelivers | read-only | mandatory | The total number of IPX packets delivered locally, including packets from local applications. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.18 | ColumnipxSysNETBIOSPackets | read-only | mandatory | Number of NETBIOS packets. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.19 | ColumnipxSysForwPackets | read-only | mandatory | The number of IPX packets forwarded. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.20 | ColumnipxSysOutRequests | read-only | mandatory | The number of IPX packets supplied locally for transmission, not including any packets counted in ipxForwPackets. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.21 | ColumnipxSysOutNoRoutes | read-only | mandatory | The number of outgoing IPX packets discarded because no route was found. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.22 | ColumnipxSysOutFiltered | read-only | mandatory | The number of outgoing IPX packets discarded due to filtering. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.23 | ColumnipxSysOutCompressDiscards | read-only | mandatory | The number of outgoing IPX packets discarded due to compression errors. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.24 | ColumnipxSysOutMalformedRequests | read-only | mandatory | The number of IPX packets supplied locally contained errors in their structure. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.25 | ColumnipxSysOutDiscards | read-only | mandatory | The number of outgoing IPX packets discarded due to processing decision. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.26 | ColumnipxSysOutPackets | read-only | mandatory | The total number of IPX packets transmitted. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.27 | ColumnipxSysCircCount | read-only | mandatory | The number of circuits known to this instance of IPX. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.28 | ColumnipxSysDestCount | read-only | mandatory | The number of currently reachable destinations known to this instance of IPX. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.29 | ColumnipxSysServCount | read-only | mandatory | The number of services known to this instance of IPX. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.30 | ColumnipxSysResourceFailures | read-only | mandatory | The number of times this instance of IPX has been unable to obtain needed resources (memory, etc.). |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.31 | ColumnipxSysConfigSockets | read-only | mandatory | The configured maximum number of sockets that may be opened at one time. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.32 | ColumnipxSysMaxOpenSockets | read-only | mandatory | The maximum number of IPX sockets actually open at one time by this system. |
| 1.3.6.1.4.1.44.2.1.5.1.1.1.1.33 | ColumnipxSysOpenSocketFails | read-only | mandatory | The number of IPX soclet open calls which failed. |
| 1.3.6.1.4.1.44.2.1.5.1.2 | Nodecmc-ipx-ipxCircuit | |||
| 1.3.6.1.4.1.44.2.1.5.1.2.1 | TableipxCircTable | not-accessible | mandatory | The Circuit Table. |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1 | RowipxCircEntry | not-accessible | mandatory | Each entry corresponds to one circuit known to the system. |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1.1 | ColumnipxCircSysInstance | read-write | mandatory | The unique identifier of the instance of IPX to which this entry corresponds. This value may be written only when creating a new entry in the table. |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1.2 | ColumnipxCircIndex | read-write | mandatory | The identifier of ths circuit, unique within the instance of IPX. This value may be written only when creating a new table entry. |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1.3 | ColumnipxCircExistState | read-write | mandatory | The validity of this circuit entry. A circuit with this value set to off may be deleted from the table at the IPX implementation's discretion. |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1.4 | ColumnipxCircOperState | read-write | mandatory | The operational state of the circuit. |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1.5 | ColumnipxCircIfIndex | read-write | mandatory | The value of IfIndex for the interface used by this circuit. This value may be written only when creating a new entry in the table. |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1.6 | ColumnipxCircName | read-write | mandatory | The readable name for the circuit. |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1.7 | ColumnipxCircInfo | read-write | mandatory | Additional readable information for the circuit. The content of this field is implementation defined. |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1.8 | ColumnipxCircType | read-write | mandatory | The type of the circuit. |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1.9 | ColumnipxCircLocalMaxPacketSize | read-write | mandatory | The maximum size (including header), in bytes, that the system supports locally in this circuit. |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1.10 | ColumnipxCircCompressState | read-write | mandatory | The compression state on the circuit. This value may be written only when creating a new entry in the table. |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1.11 | ColumnipxCircCompressSlots | read-write | mandatory | The number of compression slots available on this circuit. This value may be written only when creating a new entry in the table. |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1.12 | ColumnipxCircCompressedSent | read-only | mandatory | The number of compressed packets sent. |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1.13 | ColumnipxCircUncompressedSent | read-only | mandatory | The number of packets sent without being compressed even though compression was turned on for this circuit. |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1.14 | ColumnipxCircMediaType | read-only | mandatory | The media type used on this circuit. |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1.15 | ColumnipxCircNetNumber | read-only | mandatory | The IPX network number to which this circuit is bound. |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1.16 | ColumnipxCircStateChanges | read-only | mandatory | The number of times the circuit has changed state. |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1.17 | ColumnipxCircInitFails | read-only | mandatory | The number of times that initialization of this circuit has failed. |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1.18 | ColumnipxCircDelay | read-only | mandatory | The period of time, in milliseconds, that it takes to transmit one byte of data, excluding protocol headers, to a destination on the other end of the circuit, … |
| 1.3.6.1.4.1.44.2.1.5.1.2.1.1.19 | ColumnipxCircThroughput | read-only | mandatory | The amount of data, in bits per second, that may flow through the circuit if there is no other traffic. |
| 1.3.6.1.4.1.44.2.1.5.1.3 | Nodecmc-ipx-ipxForwarding | |||
| 1.3.6.1.4.1.44.2.1.5.1.3.1 | TableipxDestTable | not-accessible | mandatory | The Destination Table contains information about all known destinations. |
| 1.3.6.1.4.1.44.2.1.5.1.3.1.1 | RowipxDestEntry | not-accessible | mandatory | Each entry corresponds to one destination. |
| 1.3.6.1.4.1.44.2.1.5.1.3.1.1.1 | ColumnipxDestSysInstance | read-write | mandatory | The unique identifier of the instance of IPX to which this row corresponds. This value may be written only when creating a new entry with ipxDestProtocol equal… |
| 1.3.6.1.4.1.44.2.1.5.1.3.1.1.2 | ColumnipxDestNetNum | read-write | mandatory | The IPX network number of the destination. This value may be written only when creating a new entry with ipxDestProtocol equal to static. |
| 1.3.6.1.4.1.44.2.1.5.1.3.1.1.3 | ColumnipxDestProtocol | read-write | mandatory | The routing protocol from which knowledge of this destination was obtained. This value may be written only when creating a new entry with ipxDestProtocol equal… |
| 1.3.6.1.4.1.44.2.1.5.1.3.1.1.4 | ColumnipxDestCost | read-write | mandatory | The cost to reach this destination. The meaning of the cost value is dependent on the routing protocol (i.e. Cost = delay in ticks for RIP, Cost = total path d… |
| 1.3.6.1.4.1.44.2.1.5.1.3.1.1.5 | ColumnipxDestHopCount | read-write | mandatory | The number of hops necessary to reach the destination. This value may be written only when creating a new entry with ipxDestProtocol equal to static. |
| 1.3.6.1.4.1.44.2.1.5.1.3.1.1.6 | ColumnipxDestNextHopCircIndex | read-write | mandatory | The unique identifier of the circuit used to read the next hop. This value may be written only when creating a new entry with ipxDestProtocol equal to static. |
| 1.3.6.1.4.1.44.2.1.5.1.3.1.1.7 | ColumnipxDestNextHopNICAddress | read-write | mandatory | The NIC address of the next hop. This value may be written only when creating a new entry with ipxDestProtocol equal to static. |
| 1.3.6.1.4.1.44.2.1.5.1.3.1.1.8 | ColumnipxDestNextHopNetNum | read-write | mandatory | The IPX network number of the next hop. This value may be written only when creating a new entry with ipxDestProtocol equal to static. |
| 1.3.6.1.4.1.44.2.1.5.1.3.1.1.9 | ColumnipxDestType | read-only | mandatory | Indicates whether the destination is a network of a router. |
| 1.3.6.1.4.1.44.2.1.5.1.4 | Nodecmc-ipx-ipxServices | |||
| 1.3.6.1.4.1.44.2.1.5.1.4.1 | TableipxServTable | not-accessible | mandatory | The table of services, indexed by name and type. |
| 1.3.6.1.4.1.44.2.1.5.1.4.1.1 | RowipxServEntry | not-accessible | mandatory | Each entry corresponds to one service. |
| 1.3.6.1.4.1.44.2.1.5.1.4.1.1.1 | ColumnipxServSysInstance | read-write | mandatory | The unique identifier of the instance of IPX to which this entry corresponds. This value may be written only when creating entries with the value of ipxServPro… |
| 1.3.6.1.4.1.44.2.1.5.1.4.1.1.2 | ColumnipxServName | read-write | mandatory | The service name. This value may be written only when creating entries with value of ipxServProtocol equal to static. |
| 1.3.6.1.4.1.44.2.1.5.1.4.1.1.3 | ColumnipxServTypeValue | read-write | mandatory | The service type's hexadecimal value. This value may be written only when creating entries with the value of ipxServProtocol equal to static. |
| 1.3.6.1.4.1.44.2.1.5.1.4.1.1.4 | ColumnipxServType | read-write | mandatory | The service type. This value may be written only when creating entries with the value of ipxServProtocol equal to static. |
| 1.3.6.1.4.1.44.2.1.5.1.4.1.1.5 | ColumnipxServProtocol | read-write | mandatory | The protocol from which knowledge of this service was obtained. This valuemay be written only when creating entries with ipxServProtocol equal to static. |
| 1.3.6.1.4.1.44.2.1.5.1.4.1.1.6 | ColumnipxServNetNum | read-write | mandatory | The IPX network number portion of the IPX address of the service. This value may be written only when creating entries with the value of ipxServProtocol equal … |
| 1.3.6.1.4.1.44.2.1.5.1.4.1.1.7 | ColumnipxServNode | read-write | mandatory | The node portion of the IPX address. This value may be written only when creating entries with the value of ipxServProtocol equal to static. |
| 1.3.6.1.4.1.44.2.1.5.1.4.1.1.8 | ColumnipxServSocket | read-write | mandatory | The socket portion of the IPX address of the service. This value may be written only when creating entries with the value of ipxServProtocol equal to static. |
| 1.3.6.1.4.1.44.2.1.5.2 | Nodecmc-ipx-filter | |||
| 1.3.6.1.4.1.44.2.1.5.2.1 | ScalarcmcIpxFiltStatus | read-write | mandatory | The status of IPX Filtering. |
| 1.3.6.1.4.1.44.2.1.5.2.2 | Nodecmc-ipx-filt-packet | |||
| 1.3.6.1.4.1.44.2.1.5.2.2.1 | TablecmcIpxFilterTable | not-accessible | mandatory | A list of IPX Filter table entries. |
| 1.3.6.1.4.1.44.2.1.5.2.2.1.1 | RowcmcIpxFiltEntry | not-accessible | mandatory | An IPX Filter table entry containing objects that describe ipx packet transmission / reception restrictions. Creation of an IPX Filter table entry requires the… |
| 1.3.6.1.4.1.44.2.1.5.2.2.1.1.1 | ColumncmcIpxFiltName | read-write | mandatory | Name of filter entry. This is an ASCII string up to 6 octets long. This object is required in SET PDUs. |
| 1.3.6.1.4.1.44.2.1.5.2.2.1.1.2 | ColumncmcIpxFiltSAddr | read-write | mandatory | Source IPX address. This object is required in SET PDUs. |
| 1.3.6.1.4.1.44.2.1.5.2.2.1.1.3 | ColumncmcIpxFiltDAddr | read-write | mandatory | Destination IPX address. This object is required in SET PDUs. |
| 1.3.6.1.4.1.44.2.1.5.2.2.1.1.4 | ColumncmcIpxFiltPktType | read-write | mandatory | Protocol to filter. This object is required in SET PDUs. |
| 1.3.6.1.4.1.44.2.1.5.2.2.1.1.5 | ColumncmcIpxFiltMode | read-write | mandatory | Mode of the filter entry. This object is required in SET PDUs. |
| 1.3.6.1.4.1.44.2.1.5.2.2.1.1.6 | ColumncmcIpxFiltType | read-write | mandatory | The type of the IPX Filter Table entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the cmcIpxFilterT… |
| 1.3.6.1.4.1.44.2.1.5.2.2.1.1.7 | ColumncmcIpxFiltMoveOper | read-write | mandatory | Configuration object used to move IPX Filter table entries. Parameters are defined as: Octet 0 describes the move operation [1, 2] = [Before, After] Octet 1 - … |
| 1.3.6.1.4.1.44.2.1.5.2.2.1.1.8 | ColumncmcIpxFiltUseCount | read-write | mandatory | The number of times the IPX Filter Table entry has been referenced. |
| 1.3.6.1.4.1.44.2.1.5.2.2.1.1.9 | ColumncmcIpxFiltDirection | read-write | mandatory | The flow direction for the filter entry. This object must be specified along with an interface. |
| 1.3.6.1.4.1.44.2.1.5.2.2.1.1.10 | ColumncmcIpxFiltIfIndex | read-write | mandatory | The interface index associated with the filter entry. This value is equivalent to the ifIndex object. |
| 1.3.6.1.4.1.44.2.1.5.2.2.1.1.11 | ColumncmcIpxFiltPriority | read-only | mandatory | The priority of the entry. The highest priority entry (1) is searched first. The second highest priority entry (2) is searched next, and so on. |
| 1.3.6.1.4.1.44.2.1.5.2.2.1.1.12 | ColumncmcIpxFiltState | read-write | mandatory | The validity of this entry in the IPX Packet Filter table. Setting this field to off indicates that this entry may be deleted from the table. |
| 1.3.6.1.4.1.44.2.1.5.2.3 | ScalarcmcIpxFiltRIPStatus | read-write | mandatory | The status of IPX RIP Filtering. |
| 1.3.6.1.4.1.44.2.1.5.2.4 | Nodecmc-ipx-filt-rip | |||
| 1.3.6.1.4.1.44.2.1.5.2.4.1 | TablecmcIpxFilterRIPTable | not-accessible | mandatory | A list of IPX Filter RIP table entries. |
| 1.3.6.1.4.1.44.2.1.5.2.4.1.1 | RowcmcIpxFiltRIPEntry | not-accessible | mandatory | An IPX RIP Filter table entry containing objects that describe datagram transmission/ reception restrictions. Creation of an IPX RIP Filter table entry require… |
| 1.3.6.1.4.1.44.2.1.5.2.4.1.1.1 | ColumncmcIpxFiltRIPName | read-write | mandatory | Name of RIP filter entry. This is an ASCII string up to 6 octets long. This object is required in SET PDUs. |
| 1.3.6.1.4.1.44.2.1.5.2.4.1.1.2 | ColumncmcIpxFiltRIPNetworkNum | read-write | mandatory | Network address. This object is required in SET PDUs. |
| 1.3.6.1.4.1.44.2.1.5.2.4.1.1.3 | ColumncmcIpxFiltRIPMoveOper | read-write | mandatory | Configuration object used to move IPX RIP Filter table entries. Parameters are defined as: Octet 0 describes the move operation [1, 2] = [Before, After] Octet … |
| 1.3.6.1.4.1.44.2.1.5.2.4.1.1.4 | ColumncmcIpxFiltRIPMode | read-write | mandatory | Mode of the filter entry. This object is required in SET PDUs. |
| 1.3.6.1.4.1.44.2.1.5.2.4.1.1.5 | ColumncmcIpxFiltRIPType | read-write | mandatory | The type of the IPX RIP Filter Table entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the cmcIpxFil… |
| 1.3.6.1.4.1.44.2.1.5.2.4.1.1.6 | ColumncmcIpxFiltRIPUseCount | read-write | mandatory | The number of times the IPX RIP Filter Table entry has been referenced. |
| 1.3.6.1.4.1.44.2.1.5.2.4.1.1.7 | ColumncmcIpxFiltRIPDirection | read-write | mandatory | The flow direction for the filter entry. This object must be specified along with an interface. |
| 1.3.6.1.4.1.44.2.1.5.2.4.1.1.8 | ColumncmcIpxFiltRIPQueryType | read-write | mandatory | The type of packet entry. This object must be specified along with an interface. |
| 1.3.6.1.4.1.44.2.1.5.2.4.1.1.9 | ColumncmcIpxFiltRIPIfIndex | read-write | mandatory | The interface index associated with the filter entry. |
| 1.3.6.1.4.1.44.2.1.5.2.4.1.1.10 | ColumncmcIpxFiltRIPPriority | read-only | mandatory | The priority of the entry. The highest priority entry (1) is searched first. The second highest priority entry (2) is searched next, and so on. |
| 1.3.6.1.4.1.44.2.1.5.2.4.1.1.11 | ColumncmcIpxFiltRIPState | read-write | mandatory | The validity of this entry in the IPX RIP Filter table. Setting this field to off indicates that this entry may be deleted from the table. |
| 1.3.6.1.4.1.44.2.1.5.2.5 | ScalarcmcIpxFiltSAPStatus | read-write | mandatory | The status of IPX SAP Filtering. |
| 1.3.6.1.4.1.44.2.1.5.2.6 | Nodecmc-ipx-filt-sap | |||
| 1.3.6.1.4.1.44.2.1.5.2.6.1 | TablecmcIpxFilterSAPTable | not-accessible | mandatory | A list of IPX Filter SAP table entries. |
| 1.3.6.1.4.1.44.2.1.5.2.6.1.1 | RowcmcIpxFiltSAPEntry | not-accessible | mandatory | An IPX SAP Filter table entry containing objects that describe datagram transmission/ reception restrictions. Creation of an IPX SAP Filter table entry require… |
| 1.3.6.1.4.1.44.2.1.5.2.6.1.1.1 | ColumncmcIpxFiltSAPName | read-write | mandatory | Name of SAP filter entry. This is an ASCII string up to 6 octets long. This object is required in SET PDUs. |
| 1.3.6.1.4.1.44.2.1.5.2.6.1.1.2 | ColumncmcIpxFiltSAPServerName | read-write | mandatory | Name of SAP server. |
| 1.3.6.1.4.1.44.2.1.5.2.6.1.1.3 | ColumncmcIpxFiltSAPServerType | read-write | mandatory | The types of servers to filter. |
| 1.3.6.1.4.1.44.2.1.5.2.6.1.1.4 | ColumncmcIpxFiltSAPMoveOper | read-write | mandatory | Configuration object used to move IPX SAP Filter table entries. Parameters are defined as: Octet 0 describes the move operation [1, 2] = [Before, After] Octet … |
| 1.3.6.1.4.1.44.2.1.5.2.6.1.1.5 | ColumncmcIpxFiltSAPMode | read-write | mandatory | Mode of the filter entry. This object is required in SET PDUs. |
| 1.3.6.1.4.1.44.2.1.5.2.6.1.1.6 | ColumncmcIpxFiltSAPType | read-write | mandatory | The type of the IPX SAP Filter Table entry. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the cmcIpxFil… |
| 1.3.6.1.4.1.44.2.1.5.2.6.1.1.7 | ColumncmcIpxFiltSAPUseCount | read-write | mandatory | The number of times the IPX SAP Filter Table entry has been referenced. |
| 1.3.6.1.4.1.44.2.1.5.2.6.1.1.8 | ColumncmcIpxFiltSAPDirection | read-write | mandatory | The flow direction for the filter entry. This object must be specified along with an interface. |
| 1.3.6.1.4.1.44.2.1.5.2.6.1.1.9 | ColumncmcIpxFiltSAPQueryType | read-write | mandatory | The type of packet entry. This object must be specified along with an interface. |
| 1.3.6.1.4.1.44.2.1.5.2.6.1.1.10 | ColumncmcIpxFiltSAPIfIndex | read-write | mandatory | The interface index associated with the filter entry. |
| 1.3.6.1.4.1.44.2.1.5.2.6.1.1.11 | ColumncmcIpxFiltSAPPriority | read-only | mandatory | The priority of the entry. The highest priority entry (1) is searched first. The second highest priority entry (2) is searched next, and so on. |
| 1.3.6.1.4.1.44.2.1.5.2.6.1.1.12 | ColumncmcIpxFiltSAPState | read-write | mandatory | The validity of this entry in the IPX SAP Filter table. Setting this field to off indicates that this entry may be deleted from the table. |
| 1.3.6.1.4.1.44.2.6 | Nodecmc-trapA | |||
| 1.3.6.1.4.1.44.2.6.6 | Nodecmc-trapB | |||
| 1.3.6.1.4.1.44.2.6.6.5 | Nodecmc-trapC | |||
| 1.3.6.1.4.1.44.2.6.6.5.3 | Nodecmc-trapD | |||
| 1.3.6.1.4.1.44.2.6.6.5.3.10 | Nodecmc-trapE | |||
| 1.3.6.1.4.1.44.2.6.6.5.3.10.1 | NodecmcConnectionEstablished | A cmcConnectionEstablished(1) trap is generated when a wide area network connection is established on a dynamic link. The variable-binding contains the ifIndex… | ||
| 1.3.6.1.4.1.44.2.6.6.5.3.10.2 | NodecmcConnectionTerminated | A cmcConnectionTerminated(2) trap is generated when a wide area network connection is terminated on a dynamic link. The variable-binding contains the ifIndex v… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IpxAddress | OCTET STRING (SIZE(14)) | ||
| NetNumber | OCTET STRING (SIZE(4)) |