MIB Viewer

CNT246-MIB

37 objects
This defines the CNT Transport MIB. The Transport layer provides network link for CNT proprietary traffic.
Imported Objects
SNMPv2-SMICounter32 Counter64 enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks
SNMPv2-TCDisplayString
OIDNameAccessStatusDescription
1.3.6.1.4.1.333.2.4.6Identitycnt2TransportThis defines the CNT Transport MIB. The Transport layer provides network link for CNT proprietary traffic.
1.3.6.1.4.1.333.2.4.6.1Tablecnt2TransportTablenot-accessiblecurrentA list of Transport network link entries.
1.3.6.1.4.1.333.2.4.6.1.1Rowcnt2TransportEntrynot-accessiblecurrentA Transport network link entry.
1.3.6.1.4.1.333.2.4.6.1.1.1Columncnt2TransportSlotIndexread-onlycurrentThe slot index for this Transport entry
1.3.6.1.4.1.333.2.4.6.1.1.2Columncnt2TransportIndexread-onlycurrentThe relative index of the bus number in this Transport entry
1.3.6.1.4.1.333.2.4.6.1.1.3Columncnt2TransportBusread-onlycurrentThe network link bus number
1.3.6.1.4.1.333.2.4.6.1.1.4Columncnt2TransportVidread-onlycurrentThe virtual circuit number VCI. If ATM is used, make sure this Vid is configured the same as the VCI. Failure to do so will cause unexpected results
1.3.6.1.4.1.333.2.4.6.1.1.5Columncnt2TransportLinkTyperead-onlycurrentThe Link type supported by the CNT Transport layer.
1.3.6.1.4.1.333.2.4.6.1.1.6Columncnt2TransportLinkDescread-onlycurrentThe description of the network link suported by the CNT Transport layer
1.3.6.1.4.1.333.2.4.6.1.1.7Columncnt2TransportLinkStatusread-onlycurrentThe network link's status. The link status indicates if there is communication between the local node and the remote node.
1.3.6.1.4.1.333.2.4.6.1.1.8Columncnt2TransportIPtosPrecedenceread-writecurrentThe service precedence of IP Type of Service use by this link. There is an 8 bit field in an IP datagram that specifies the type of service a datagram is reque…
1.3.6.1.4.1.333.2.4.6.1.1.9Columncnt2TransportIPtosDelayread-writecurrentThe IP Type of Service Delay option use by this link. The Delay bit is in bit 3 of the 8 bit IP Type of Service field.
1.3.6.1.4.1.333.2.4.6.1.1.10Columncnt2TransportIPtosThruputread-writecurrentThe IP Type of Service Throughput option use by this link. The Throughput bit is in bit 4 of the 8 bit IP Type of Service field.
1.3.6.1.4.1.333.2.4.6.1.1.11Columncnt2TransportIPtosRelibilityread-writecurrentThe IP Type of Service Relibility option use by this link. The Relibility bit is in bit 5 of the 8 bit IP Type of Service field.
1.3.6.1.4.1.333.2.4.6.1.1.12Columncnt2TransportRemoteIpread-onlycurrentThe remote IP address. This address is set when Transport is configured.
1.3.6.1.4.1.333.2.4.6.1.1.13Columncnt2TransportProtocolread-onlycurrentThe protocol used by this link. At the moment the only protocol is SAP.
1.3.6.1.4.1.333.2.4.6.1.1.14Columncnt2TransportCompressionOptionread-writecurrentReflects whether compression option is turned on/off.
1.3.6.1.4.1.333.2.4.6.1.1.15Columncnt2TransportMaxXmitRateread-writecurrentThe Maximum Transfer Rate of this link.
1.3.6.1.4.1.333.2.4.6.1.1.16Columncnt2TransportResetTimeread-onlycurrentThe time, in seconds, when the stats was last reset.
1.3.6.1.4.1.333.2.4.6.1.1.17Columncnt2TransportInPktsread-onlycurrentThe number of packets transmitted to the link
1.3.6.1.4.1.333.2.4.6.1.1.18Columncnt2TransportInOctetsread-onlycurrentThe number of bytes transmitted to the link
1.3.6.1.4.1.333.2.4.6.1.1.19Columncnt2TransportOutPktsread-onlycurrentThe number of packets transmitted out from the link
1.3.6.1.4.1.333.2.4.6.1.1.20Columncnt2TransportOutOctetsread-onlycurrentThe number of bytes transmitted out from the link
1.3.6.1.4.1.333.2.4.6.1.1.21Columncnt2TransportRexmitread-onlycurrentThe number of packets being retransmitted
1.3.6.1.4.1.333.2.4.6.1.1.22Columncnt2TransportOosHighread-onlycurrentThe number of out of sequence packets received
1.3.6.1.4.1.333.2.4.6.1.1.23Columncnt2TransportStatsResetread-writecurrentSetting this will result the Transport statistic to be reset
1.3.6.1.4.1.333.2.4.6.1.1.24Columncnt2TransportRawOutOctetsread-onlycurrentThe number of bytes transmitted out from the lower interface of Transport layer. This is the amount of data after Compression plus Transport header.
1.3.6.1.4.1.333.2.4.6.1.1.25Columncnt2TransportRawInOctetsread-onlycurrentThe number of bytes received in from the lower interface of Transport layer. This is the amount of data after Compression plus Transport header.
1.3.6.1.4.1.333.2.4.6.1.1.26Columncnt2TransportWindowSizeread-onlycurrentThe current window size, value is number buffers outstanding on the connection
1.3.6.1.4.1.333.2.4.6.1.1.27Columncnt2TransportSegmentSizeread-onlycurrentRange from (0 to 65532) If this value is non-zero, this value is used for segmentation. If equal to 0, then TransportSegmentSizeHi is what being used.
1.3.6.1.4.1.333.2.4.6.1.1.28Columncnt2TransportSegmentSizeHiread-onlycurrentRange from (0 to 65532) If this value is used when TransportSegmentSize is set to 0. This value is passed in from user layer's MTU size.
1.3.6.1.4.1.333.2.4.6.1.1.29Columncnt2TransportRoundTripTimerread-onlycurrentThe current round trip timer. each count is in 50msec.
1.3.6.1.4.1.333.2.4.6.1.1.30Columncnt2TransportHoldCountread-onlycurrentThe current hold count.
1.3.6.1.4.1.333.2.4.6.1.1.31Columncnt2TransportHoldCountRatio1read-onlycurrentIncremented when an ack is received and there is no data on the hold queue and there is no outstanding (unacked) data. It indicates that transmission is idled …
1.3.6.1.4.1.333.2.4.6.1.1.32Columncnt2TransportHoldCountRatio2read-onlycurrentIncremented when an ack is received and there is no data on the hold queue but there is outstanding (unacked) data.
1.3.6.1.4.1.333.2.4.6.1.1.33Columncnt2TransportHoldCountRatio3read-onlycurrentIncremented when an ack is received and there is data on the hold queue ready to be sent.
1.3.6.1.4.1.333.2.4.6.1.1.34Columncnt2TransportTotalDisconnectread-onlycurrentTotal disconnects at Transport Layer.