CNTAU-MIB
446 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.333 | Nodecnt | |||
| 1.3.6.1.4.1.333.1 | Nodecntau | |||
| 1.3.6.1.4.1.333.1.1 | NodecntInformationalMsg | A cnt level one trap signifies that an event has occured that is informational in severity. The network will not be affected by this error. | ||
| 1.3.6.1.4.1.333.1.1 | Nodecntsystem | |||
| 1.3.6.1.4.1.333.1.1.1 | ScalarcntSysNodeAddress | read-only | mandatory | Node address of this CNT platform. This value contains the region (1 byte), the bus (1 byte), and the node (2 bytes). |
| 1.3.6.1.4.1.333.1.1.2 | ScalarcntSysTimeofDay | read-only | mandatory | The date and time from Battery-Backed-up RAM (BBRAM). |
| 1.3.6.1.4.1.333.1.1.3 | TablecntSysMsgTable | not-accessible | mandatory | List of entries in the global mail box. This mail box contains any message that have been entered by any software residing in the node. |
| 1.3.6.1.4.1.333.1.1.3.1 | RowcntMsgEntry | not-accessible | mandatory | A mail box entry. |
| 1.3.6.1.4.1.333.1.1.3.1.1 | ColumncntMsgIndex | read-only | mandatory | The relative index of this mail box message. |
| 1.3.6.1.4.1.333.1.1.3.1.2 | ColumncntMsgSeverity | read-only | mandatory | The severity of this mail box message. |
| 1.3.6.1.4.1.333.1.1.3.1.3 | ColumncntMsgTaskName | read-only | mandatory | The name of the module that sent this message to the mail box. |
| 1.3.6.1.4.1.333.1.1.3.1.4 | ColumncntMsgNumber | read-only | mandatory | The number of this message. Each module numbers its message type as another way of describing it. This message can then be cross-referenced in the CNT system m… |
| 1.3.6.1.4.1.333.1.1.3.1.5 | ColumncntMsgCpuNumber | read-only | mandatory | The CPU of the module that sent this message to the mail box. |
| 1.3.6.1.4.1.333.1.1.3.1.6 | ColumncntMsgNodeNumber | read-only | mandatory | The node number of the module that sent this message to the mail box. |
| 1.3.6.1.4.1.333.1.1.3.1.7 | ColumncntMsgDateTime | read-only | mandatory | The date and time that this message was sent to the mail box. |
| 1.3.6.1.4.1.333.1.1.3.1.8 | ColumncntMsgContent | read-only | mandatory | The textual contents of the message sent to the mail box. |
| 1.3.6.1.4.1.333.1.1.3.1.9 | ColumncntMsgSeqNumber | read-only | mandatory | The sequence number for this message. |
| 1.3.6.1.4.1.333.1.1.4 | NodecntSysHardware | |||
| 1.3.6.1.4.1.333.1.1.4.1 | ScalarcntHwBBramType | read-only | mandatory | The type of battery backed up memory. |
| 1.3.6.1.4.1.333.1.1.4.2 | ScalarcntHwBBramStatus | read-only | mandatory | The status of the batteries used in the BBRAM. A failing status indicates that one or more of the batteries are failing. |
| 1.3.6.1.4.1.333.1.1.4.3 | ScalarcntHwFailedCpu | read-only | mandatory | The CPU number where a failure occurred. If this value is zero then there are no failures. |
| 1.3.6.1.4.1.333.1.1.4.4 | ScalarcntHwMonCpu | read-only | mandatory | The CPU number of the monitor that noticed the CPU failure. |
| 1.3.6.1.4.1.333.1.1.4.5 | ScalarcntHwFailStatus | read-only | mandatory | Status that the failing CPU recorded at the time of the failure. |
| 1.3.6.1.4.1.333.1.1.4.6 | ScalarcntHwMonFailStatus | read-only | mandatory | Status that the monitoring CPU recorded at the time of the failure. |
| 1.3.6.1.4.1.333.1.1.4.7 | ScalarcntHwFailDate | read-only | mandatory | Time and date when the processor failed. |
| 1.3.6.1.4.1.333.1.1.4.8 | ScalarcntHwReset1Why | read-only | mandatory | The reason for the last reset. |
| 1.3.6.1.4.1.333.1.1.4.9 | ScalarcntHwReset1Date | read-only | mandatory | The time and date of the last reset. |
| 1.3.6.1.4.1.333.1.1.4.10 | ScalarcntHwReset2Why | read-only | mandatory | The reason for the second-to-last reset. |
| 1.3.6.1.4.1.333.1.1.4.11 | ScalarcntHwReset2Date | read-only | mandatory | The time and date of the second-to-last reset. |
| 1.3.6.1.4.1.333.1.1.4.12 | ScalarcntHwReset3Why | read-only | mandatory | The reason for the third-to-last reset. |
| 1.3.6.1.4.1.333.1.1.4.13 | ScalarcntHwReset3Date | read-only | mandatory | The time and date of the third-to-last reset. |
| 1.3.6.1.4.1.333.1.1.4.14 | ScalarcntHwPowerSupply | read-only | mandatory | The status of the power supply or power supplies. This value will indicate good only if all power supplies in the node are working. If any fan or power supply … |
| 1.3.6.1.4.1.333.1.1.4.15 | TablecntHwCpuTable | not-accessible | mandatory | A list of CPU statistics entries. All possible CPUs for a box are accessible whether or not they even exist. |
| 1.3.6.1.4.1.333.1.1.4.15.1 | RowcntHwCpuEntry | not-accessible | mandatory | A CPU statistics entry. |
| 1.3.6.1.4.1.333.1.1.4.15.1.1 | ColumncntCpuNum | read-only | mandatory | The cpu index. |
| 1.3.6.1.4.1.333.1.1.4.15.1.2 | ColumncntCpuType | read-only | mandatory | The type of the CPU requested. |
| 1.3.6.1.4.1.333.1.1.4.15.1.3 | ColumncntCpuSemCount | read-only | mandatory | The number of semaphores for this CPU. |
| 1.3.6.1.4.1.333.1.1.4.15.1.4 | ColumncntCpuSemLost | read-only | mandatory | The number of semaphores lost for this CPU. |
| 1.3.6.1.4.1.333.1.1.4.15.1.5 | ColumncntCpuStatus | read-only | mandatory | The current known status of this CPU. |
| 1.3.6.1.4.1.333.1.1.4.15.1.6 | ColumncntCpuMonStatus | read-only | mandatory | The current status of this CPU as known by the monitoring CPU. |
| 1.3.6.1.4.1.333.1.1.4.15.1.7 | ColumncntCpuPollStatus | read-only | mandatory | The status of the current polling request for this CPU. |
| 1.3.6.1.4.1.333.1.1.4.15.1.8 | ColumncntCpuPolls | read-only | mandatory | The number of polls sent for this CPU. |
| 1.3.6.1.4.1.333.1.1.4.15.1.9 | ColumncntCpuResetDelayTime | read-only | mandatory | The reset delay time, in seconds. |
| 1.3.6.1.4.1.333.1.1.4.15.1.10 | ColumncntCpuMonBy | read-only | mandatory | The system number for the CPU monitoring this CPU. |
| 1.3.6.1.4.1.333.1.1.4.15.1.11 | ColumncntCpuPort | read-only | mandatory | The port number for this CPU. |
| 1.3.6.1.4.1.333.1.1.4.15.1.12 | ColumncntCpuUnclaims | read-only | mandatory | The number of unclaimed grant interrupts on the system controller CPU. |
| 1.3.6.1.4.1.333.1.1.4.15.1.13 | ColumncntCpuXtraInts | read-only | mandatory | The number of spurious interrupts. |
| 1.3.6.1.4.1.333.1.1.4.15.1.14 | ColumncntCpuLevel7s | read-only | mandatory | The number of unidentified level seven interrupts. |
| 1.3.6.1.4.1.333.1.1.4.15.1.15 | ColumncntCpuMsgRets | read-only | mandatory | The number of undeliverable MDM interprocessor messages. |
| 1.3.6.1.4.1.333.1.1.4.15.1.16 | ColumncntCpuMsgHolds | read-only | mandatory | The number of messages held which were being returned to the failed processor. |
| 1.3.6.1.4.1.333.1.1.4.15.1.17 | ColumncntCpuResetFlag | read-only | mandatory | The value of the reset flag. |
| 1.3.6.1.4.1.333.1.1.4.15.1.18 | ColumncntCpuUtil | read-only | mandatory | The CPU utilization, in percent utilized. |
| 1.3.6.1.4.1.333.1.1.4.15.1.19 | ColumncntCpuLastFailDate | read-only | mandatory | The date and time of the last failure. |
| 1.3.6.1.4.1.333.1.1.4.15.1.20 | ColumncntCpuLastChgDate | read-only | mandatory | The date and time of the last change. |
| 1.3.6.1.4.1.333.1.1.4.16 | ScalarcntHwStatusLED | read-only | mandatory | Two digit, LCD display. During system initialization it indicates the processor that is being initialized. Successful initialization is indicated by a display … |
| 1.3.6.1.4.1.333.1.1.5 | NodecntSysBuild | |||
| 1.3.6.1.4.1.333.1.1.5.1 | ScalarcntRevDate | read-only | mandatory | The BBRAM revision date of the system description (!RV2) file. |
| 1.3.6.1.4.1.333.1.1.5.2 | ScalarcntCustomer | read-only | mandatory | Customer name and other identifying information. |
| 1.3.6.1.4.1.333.1.1.5.3 | ScalarcntMachineType | read-only | mandatory | The machine type of this node. |
| 1.3.6.1.4.1.333.1.1.5.4 | ScalarcntSerialNumber | read-only | mandatory | The machine serial number of this node. |
| 1.3.6.1.4.1.333.1.1.5.5 | ScalarcntWorkOrderNumber | read-only | mandatory | The original manufacturing build work order number of this node. |
| 1.3.6.1.4.1.333.1.1.5.6 | ScalarcntChassisNumber | read-only | mandatory | The machine chassis number of this node. |
| 1.3.6.1.4.1.333.1.1.5.7 | ScalarcntModelNumber | read-only | mandatory | The machine model number of this node. |
| 1.3.6.1.4.1.333.1.1.5.8 | ScalarcntReleaseLevel | read-only | mandatory | The original software release level installed in this node. |
| 1.3.6.1.4.1.333.1.1.5.9 | ScalarcntRevEditDate | read-only | mandatory | The date that this version of the system description (!RV2) file was edited dynamically. |
| 1.3.6.1.4.1.333.1.1.5.10 | ScalarcntRevEditTime | read-only | mandatory | The time that this version of the system description (!RV2) file was edited dynamically. |
| 1.3.6.1.4.1.333.1.1.5.11 | TablecntFeatureTable | not-accessible | mandatory | The list of manufacturing features originally installed in this node. |
| 1.3.6.1.4.1.333.1.1.5.11.1 | RowcntFeatureEntry | not-accessible | mandatory | A node feature entry. |
| 1.3.6.1.4.1.333.1.1.5.11.1.1 | ColumncntFeatureIndex | read-only | mandatory | The feature index. |
| 1.3.6.1.4.1.333.1.1.5.11.1.2 | ColumncntFeatureName | read-only | mandatory | The name of this feature. |
| 1.3.6.1.4.1.333.1.1.5.11.1.3 | ColumncntFeatureQuantity | read-only | mandatory | The quantity of this feature. |
| 1.3.6.1.4.1.333.1.1.5.11.1.4 | ColumncntFeatureDescr | read-only | mandatory | A description of this feature. |
| 1.3.6.1.4.1.333.1.1.5.12 | TablecntSlotTable | not-accessible | mandatory | The list of VME slots in this node. |
| 1.3.6.1.4.1.333.1.1.5.12.1 | RowcntSlotEntry | not-accessible | mandatory | A node slot entry. |
| 1.3.6.1.4.1.333.1.1.5.12.1.1 | ColumncntSlotIndex | read-only | mandatory | The slot index. |
| 1.3.6.1.4.1.333.1.1.5.12.1.2 | ColumncntSlotName | read-only | mandatory | The board name in this slot. |
| 1.3.6.1.4.1.333.1.1.5.12.1.3 | ColumncntSlotPartNumber | read-only | mandatory | The part number for the board in this slot. |
| 1.3.6.1.4.1.333.1.1.5.12.1.4 | ColumncntSlotSerialNumber | read-only | mandatory | The serial number for the board in this slot. |
| 1.3.6.1.4.1.333.1.1.5.12.1.5 | ColumncntSlotRevLevel | read-only | mandatory | The revision number of the board in this slot. |
| 1.3.6.1.4.1.333.1.1.5.12.1.6 | ColumncntSlotInterface | read-only | mandatory | The interface name of the board in this slot. |
| 1.3.6.1.4.1.333.1.1.5.12.1.7 | ColumncntSlotCpuNumber | read-only | mandatory | The cpu number of the board in this slot. |
| 1.3.6.1.4.1.333.1.1.5.12.1.8 | ColumncntSlotVMEbusGrant | read-only | mandatory | The VME bus grant priority of the board in this slot. |
| 1.3.6.1.4.1.333.1.1.5.13 | TablecntIOTable | not-accessible | mandatory | The list of VME I/O boards in this node. |
| 1.3.6.1.4.1.333.1.1.5.13.1 | RowcntIOEntry | not-accessible | mandatory | A node board entry. |
| 1.3.6.1.4.1.333.1.1.5.13.1.1 | ColumncntIOIndex | read-only | mandatory | The I/O board index. |
| 1.3.6.1.4.1.333.1.1.5.13.1.2 | ColumncntIOName | read-only | mandatory | The I/O board name. |
| 1.3.6.1.4.1.333.1.1.5.13.1.3 | ColumncntIOPartNumber | read-only | mandatory | The part number for this I/O board. |
| 1.3.6.1.4.1.333.1.1.5.13.1.4 | ColumncntIOSerialNumber | read-only | mandatory | The serial number for this I/O board. |
| 1.3.6.1.4.1.333.1.1.5.13.1.5 | ColumncntIORevLevel | read-only | mandatory | The revision number of this I/O board. |
| 1.3.6.1.4.1.333.1.1.5.13.1.6 | ColumncntIOInterface | read-only | mandatory | The interface name of this I/O board. |
| 1.3.6.1.4.1.333.1.1.5.13.1.7 | ColumncntIOCpuNumber | read-only | mandatory | The cpu number of this I/O board. |
| 1.3.6.1.4.1.333.1.1.5.14 | TablecntPowerTable | not-accessible | mandatory | The list of power supplies in this node. |
| 1.3.6.1.4.1.333.1.1.5.14.1 | RowcntPowerEntry | not-accessible | mandatory | A node power supply entry. |
| 1.3.6.1.4.1.333.1.1.5.14.1.1 | ColumncntPowerIndex | read-only | mandatory | The power supply index. |
| 1.3.6.1.4.1.333.1.1.5.14.1.2 | ColumncntPowerName | read-only | mandatory | The power supply name. |
| 1.3.6.1.4.1.333.1.1.5.14.1.3 | ColumncntPowerPartNumber | read-only | mandatory | The part number for this power supply. |
| 1.3.6.1.4.1.333.1.1.5.14.1.4 | ColumncntPowerSerialNumber | read-only | mandatory | The serial number for this power supply. |
| 1.3.6.1.4.1.333.1.1.5.14.1.5 | ColumncntPowerRevLevel | read-only | mandatory | The revision number of this power supply. |
| 1.3.6.1.4.1.333.1.1.5.15 | TablecntSCRTable | not-accessible | mandatory | The list of SCRs in this node. |
| 1.3.6.1.4.1.333.1.1.5.15.1 | RowcntSCREntry | not-accessible | mandatory | A node SCR entry. |
| 1.3.6.1.4.1.333.1.1.5.15.1.1 | ColumncntSCRIndex | read-only | mandatory | The SCR index. |
| 1.3.6.1.4.1.333.1.1.5.15.1.2 | ColumncntSCRNumber | read-only | mandatory | A SCR number installed in this node. |
| 1.3.6.1.4.1.333.1.1.5.16 | ScalarcntSerialAlfaNumber | read-only | mandatory | The machine serial number of this node. |
| 1.3.6.1.4.1.333.1.1.6 | NodecntSysMemory | |||
| 1.3.6.1.4.1.333.1.1.6.1 | ScalarcntMemBBramAddress | read-only | mandatory | The starting address of battery-backed-up RAM. BBRAM is used to store the software and configuration files. |
| 1.3.6.1.4.1.333.1.1.6.2 | ScalarcntMemBBramSpace | read-only | mandatory | The amount of BBRAM memory in bytes installed in this node. |
| 1.3.6.1.4.1.333.1.1.6.3 | ScalarcntMemBBramFree | read-only | mandatory | The amount of BBRAM memory in bytes available in this node. |
| 1.3.6.1.4.1.333.1.1.6.4 | ScalarcntMemSramAddress | read-only | mandatory | The starting address of static ram. SRAM is used as buffer space. |
| 1.3.6.1.4.1.333.1.1.6.5 | ScalarcntMemSramSpace | read-only | mandatory | The amount of SRAM memory in bytes installed in this node. |
| 1.3.6.1.4.1.333.1.1.6.6 | ScalarcntMemSramFree | read-only | mandatory | The amount of SRAM memory in bytes available in this node. |
| 1.3.6.1.4.1.333.1.1.7 | TablecntSysCpuTable | not-accessible | mandatory | List of cpu entries. |
| 1.3.6.1.4.1.333.1.1.7.1 | RowcntSysCpuEntry | not-accessible | mandatory | A cpu entry. |
| 1.3.6.1.4.1.333.1.1.7.1.1 | ColumncntCpuIndex | read-only | mandatory | The cpu index. |
| 1.3.6.1.4.1.333.1.1.7.1.2 | ColumncntCpuMemSpace | read-only | mandatory | The amount of memory in bytes installed in this cpu. |
| 1.3.6.1.4.1.333.1.1.7.1.3 | ColumncntCpuMemFree | read-only | mandatory | The amount of memory in bytes available in this cpu. |
| 1.3.6.1.4.1.333.1.1.7.1.4 | TablecntCpuTaskTable | not-accessible | mandatory | List of cpu task entries. |
| 1.3.6.1.4.1.333.1.1.7.1.4.1 | RowcntCpuTaskEntry | not-accessible | mandatory | A cpu task list entry. |
| 1.3.6.1.4.1.333.1.1.7.1.4.1.1 | ColumncntCpuTaskIndex | read-only | mandatory | The relative index of the task on this cpu. |
| 1.3.6.1.4.1.333.1.1.7.1.4.1.2 | ColumncntCpuTaskName | read-only | mandatory | The operating system name for a loaded and possibly executing task on this cpu. |
| 1.3.6.1.4.1.333.1.2 | NodecntPossibleErrMsg | A cnt level two trap signifies that an event has occured that is possibly severe in nature. The scope of this failure is dependent on the network design. | ||
| 1.3.6.1.4.1.333.1.2 | Nodecntinterfaces | |||
| 1.3.6.1.4.1.333.1.2.1 | TablecntifTable | not-accessible | mandatory | A list of CNT interface entries. |
| 1.3.6.1.4.1.333.1.2.1.1 | RowcntifEntry | not-accessible | mandatory | An CNT interface entry. |
| 1.3.6.1.4.1.333.1.2.1.1.1 | ColumncntifIndex | read-only | mandatory | An index value that uniquely identifies an interface on a CNT node. The interface identified by a particular value of this index is the same interface as ident… |
| 1.3.6.1.4.1.333.1.2.1.1.2 | ColumncntifType | read-only | mandatory | The type of interface. For standardized interface types in mib-2, this number is redundant. CNT specific interface types are appended to the end of the standar… |
| 1.3.6.1.4.1.333.1.2.1.1.3 | ColumncntifCpu | read-only | mandatory | The cpu number where the device driver for this interface resides. |
| 1.3.6.1.4.1.333.1.2.1.1.4 | ColumncntifSubIndex | read-only | mandatory | A value that uniquely indexes an interface in a multiply-interfaced device driver. |
| 1.3.6.1.4.1.333.1.2.2 | ScalarcntIfsState | read-only | mandatory | A 32 bit-map of the interface states. The bits are ordered from 1 to 32 with the most significant bit on the left. if the bit is set, the corresponding interfa… |
| 1.3.6.1.4.1.333.1.3 | NodecntSevereErrMsg | A cnt level three trap signifies that an event has occured that is unrecoverable. Some aspect of the CNT network will not function as expected. Related aspects… | ||
| 1.3.6.1.4.1.333.1.4 | NodecntCriticalErrMsg | A cnt level four trap signifies that an event has occured that is critical and possibly fatal. Some aspect of the cnt network will not function or is seriously… | ||
| 1.3.6.1.4.1.333.1.5 | Nodecnticmp | |||
| 1.3.6.1.4.1.333.1.5.1 | ScalarcnticmpInDuNets | read-only | mandatory | The number of times a destination unreachable message was received for an unreachable network. |
| 1.3.6.1.4.1.333.1.5.2 | ScalarcnticmpInDuHosts | read-only | mandatory | The number of times a destination unreachable message was received for an unreachable host. |
| 1.3.6.1.4.1.333.1.5.3 | ScalarcnticmpInDuProtos | read-only | mandatory | The number of times a destination unreachable message was received due to an unreachable protocol. |
| 1.3.6.1.4.1.333.1.5.4 | ScalarcnticmpInDuPorts | read-only | mandatory | The number of times a destination unreachable message was received due to an unreachable port. |
| 1.3.6.1.4.1.333.1.5.5 | ScalarcnticmpInDuFrags | read-only | mandatory | The number of times a destination unreachable message was received due to a fragmentation requirement but the Don't Fragment flag is set. |
| 1.3.6.1.4.1.333.1.5.6 | ScalarcnticmpInDuSources | read-only | mandatory | The number of times a destination unreachable message was received due to a source route that is not usable. |
| 1.3.6.1.4.1.333.1.5.7 | ScalarcnticmpInTmXceeds | read-only | mandatory | The number of times a time exceeded message was received for an expired datagram. |
| 1.3.6.1.4.1.333.1.5.8 | ScalarcnticmpInTmFrags | read-only | mandatory | The number of times a time exceeded message was received for a datagram that could not be reassembled before its lifetime expired. |
| 1.3.6.1.4.1.333.1.5.9 | ScalarcnticmpInReNets | read-only | mandatory | The number of times a redirect message was received due to a shorter path to a destination network having been found. |
| 1.3.6.1.4.1.333.1.5.10 | ScalarcnticmpInReHosts | read-only | mandatory | The number of times a redirect message was received due to a shorter path to a destination host having been found. |
| 1.3.6.1.4.1.333.1.5.11 | ScalarcnticmpInReServnets | read-only | mandatory | The number of times a redirect message was received due to a shorter path to a destination network with the requested type of service having been found. |
| 1.3.6.1.4.1.333.1.5.12 | ScalarcnticmpInReServhosts | read-only | mandatory | The number of times a redirect message was received due to a shorter path to a destination host with the requested type of service having been found. |
| 1.3.6.1.4.1.333.1.5.13 | ScalarcnticmpOutDuNets | read-only | mandatory | The number of times a destination unreachable message was sent to a requester when it attempted to send a datagram to an unreachable network. |
| 1.3.6.1.4.1.333.1.5.14 | ScalarcnticmpOutDuHosts | read-only | mandatory | The number of times a destination unreachable message was sent to a requester when it attempted to send a datagram to an unreachable host. |
| 1.3.6.1.4.1.333.1.5.15 | ScalarcnticmpOutDuProtos | read-only | mandatory | The number of times a destination unreachable message was sent to a requester when it attempted to send a datagram to an unreachable protocol. |
| 1.3.6.1.4.1.333.1.5.16 | ScalarcnticmpOutDuPorts | read-only | mandatory | The number of times a destination unreachable message was sent to a requester when it attempted to send a datagram to an unreachable port. |
| 1.3.6.1.4.1.333.1.5.17 | ScalarcnticmpOutDuFrags | read-only | mandatory | The number of times a destination unreachable message was sent to a requester when it attempted to send a datagram requiring fragmentation but the Don't Fragme… |
| 1.3.6.1.4.1.333.1.5.18 | ScalarcnticmpOutDuSources | read-only | mandatory | The number of times a destination unreachable message was sent due to a source route that is not usable. |
| 1.3.6.1.4.1.333.1.5.19 | ScalarcnticmpOutTmXceeds | read-only | mandatory | The number of times a time exceeded message was sent for an expired datagram. |
| 1.3.6.1.4.1.333.1.5.20 | ScalarcnticmpOutTmFrags | read-only | mandatory | The number of times a time exceeded message was sent for a datagram that could not be reassembled before its lifetime expired. |
| 1.3.6.1.4.1.333.1.5.21 | ScalarcnticmpOutReNets | read-only | mandatory | The number of times a redirect message was sent due to a shorter path to a destination network having been found. |
| 1.3.6.1.4.1.333.1.5.22 | ScalarcnticmpOutReHosts | read-only | mandatory | The number of times a redirect message was sent due to a shorter path to a destination host having been found. |
| 1.3.6.1.4.1.333.1.5.23 | ScalarcnticmpOutReServnets | read-only | mandatory | The number of times a redirect message was sent due to a shorter path to a destination network with the requested type of service having been found. |
| 1.3.6.1.4.1.333.1.5.24 | ScalarcnticmpOutReServhosts | read-only | mandatory | The number of times a redirect message was sent due to a shorter path to a destination host with the requested type of service having been found. |
| 1.3.6.1.4.1.333.1.10 | Nodecnttransmission | |||
| 1.3.6.1.4.1.333.1.10.1 | Nodecntdot3 | |||
| 1.3.6.1.4.1.333.1.10.1.1 | Tablecntdot3Table | not-accessible | mandatory | Status information and control variables for a collection of ethernet software device drivers in a particular CNT system. |
| 1.3.6.1.4.1.333.1.10.1.1.1 | Rowcntdot3Entry | not-accessible | mandatory | Status information and control variables for a particular CNT ethernet software device driver. |
| 1.3.6.1.4.1.333.1.10.1.1.1.1 | Columncntdot3Index | read-only | mandatory | An index value that uniquely identifies an interface to a CNT ethernet-like medium. The interface identified by a particular value of this index is the same in… |
| 1.3.6.1.4.1.333.1.10.1.1.1.2 | Columncntdot3SoftwareID | read-only | mandatory | The binary software revision number in the header of the ethernet driver. |
| 1.3.6.1.4.1.333.1.10.1.1.1.3 | Columncntdot3BufsAllocated | read-only | mandatory | The number of CNT buffers allocated by the ethernet device driver at initialization. |
| 1.3.6.1.4.1.333.1.10.1.1.1.4 | Columncntdot3BufTooManys | read-only | mandatory | The number of buffers sent by a higher layer that were returned to that layer without transmission due to a full queue of waiting outbound buffers. |
| 1.3.6.1.4.1.333.1.10.1.1.1.5 | Columncntdot3BufNotAvails | read-only | mandatory | The number of requests made to the free pool of ethernet buffers that failed due to a lack buffers in that pool. |
| 1.3.6.1.4.1.333.1.10.1.1.1.6 | Columncntdot3BufPriority | read-only | mandatory | The priority value assigned to inbound ethernet buffers. |
| 1.3.6.1.4.1.333.1.10.1.1.1.7 | Columncntdot3PICBusErrs | read-only | mandatory | The number of times a failure was detected when attempting to access the VME bus. |
| 1.3.6.1.4.1.333.1.10.1.1.1.8 | Columncntdot3PICDMAErrs | read-only | mandatory | The number of times ethernet local memory had a parity error during a DMA memory cycle. These errors would normally indicate a hardware problem. |
| 1.3.6.1.4.1.333.1.10.1.1.1.9 | Columncntdot3PICMemSeqErrs | read-only | mandatory | The number of times the hardware could not successfully arbitrate multiple requests to access ethernet local memory. These errors would normally indicate a har… |
| 1.3.6.1.4.1.333.1.10.1.1.1.10 | Columncntdot3PICMemParityErrs | read-only | mandatory | The number of ethernet local memory parity errors. These errors would normally indicate a hardware problem. |
| 1.3.6.1.4.1.333.1.10.1.1.1.11 | Columncntdot3PICSpuriousInts | read-only | mandatory | The number of interrupts generated by the PIC that were not mapped to any particular hardware event. |
| 1.3.6.1.4.1.333.1.10.1.1.1.12 | Columncntdot3LanceInts | read-only | mandatory | The number of LANCE hardware interrupts detected by the controlling CPU. |
| 1.3.6.1.4.1.333.1.10.1.1.1.13 | Columncntdot3LanceParityErrs | read-only | mandatory | The number of parity errors detected when the LANCE was accessing local memory. These errors would normally indicate a hardware problem. |
| 1.3.6.1.4.1.333.1.10.1.1.1.14 | Columncntdot3LanceMemErrs | read-only | mandatory | The number of times the LANCE detected a local memory access failure. |
| 1.3.6.1.4.1.333.1.10.1.1.1.15 | Columncntdot3LanceMissedPkts | read-only | mandatory | The number of packets on the ethernet medium that were detected by the LANCE but failed to be captured in the inbound queue. |
| 1.3.6.1.4.1.333.1.10.1.1.1.16 | Columncntdot3LanceUnderFlows | read-only | mandatory | The number of message truncated by the LANCE transmitter due to data late from memory. An underflow indication by the LANCE indicates that the silo was emptied… |
| 1.3.6.1.4.1.333.1.10.1.1.1.17 | Columncntdot3LanceOverFlows | read-only | mandatory | The number of times the LANCE receiver lost all or part of the incoming packet due to an inability to store the packet in a memory buffer before the internal s… |
| 1.3.6.1.4.1.333.1.10.1.1.1.18 | Columncntdot3LanceTxWaitQ | read-only | mandatory | The number of buffers in local memory and on the ethernet device driver's software queue awaiting transmission by the LANCE. |
| 1.3.6.1.4.1.333.1.10.1.1.1.19 | Columncntdot3DMAChan1RxErr | read-only | mandatory | The error code reported by the DMA controller channel 1. This channel is used to write inbound ethernet messages. |
| 1.3.6.1.4.1.333.1.10.1.1.1.20 | Columncntdot3DMAChan3RxErr | read-only | mandatory | The error code reported by the DMA controller channel 3. This channel is used to write inbound ethernet messages. |
| 1.3.6.1.4.1.333.1.10.1.1.1.21 | Columncntdot3DMAChan0TxErr | read-only | mandatory | The error code reported by the DMA controller channel 0. This channel is used to write outbound ethernet messages. |
| 1.3.6.1.4.1.333.1.10.1.1.1.22 | Columncntdot3DMAChan2TxErr | read-only | mandatory | The error code reported by the DMA controller channel 2. This channel is used to write outbound ethernet messages. |
| 1.3.6.1.4.1.333.1.10.1.1.1.23 | Columncntdot3DMAChan1RxErrs | read-only | mandatory | The number of errors reported by the DMA controller channel 1. This channel is used to write inbound ethernet messages. |
| 1.3.6.1.4.1.333.1.10.1.1.1.24 | Columncntdot3DMAChan3RxErrs | read-only | mandatory | The number of errors reported by the DMA controller channel 1. This channel is used to write inbound ethernet messages. |
| 1.3.6.1.4.1.333.1.10.1.1.1.25 | Columncntdot3DMAChan0TxErrs | read-only | mandatory | The number of errors reported by the DMA controller channel 1. This channel is used to write outbound ethernet messages. |
| 1.3.6.1.4.1.333.1.10.1.1.1.26 | Columncntdot3DMAChan2TxErrs | read-only | mandatory | The number of errors reported by the DMA controller channel 1. This channel is used to write outbound ethernet messages. |
| 1.3.6.1.4.1.333.1.10.1.1.1.27 | Columncntdot3DMARxWaitQ | read-only | mandatory | The number of successfully received ethernet messages awaiting transmission by the DMA to global memory buffers. |
| 1.3.6.1.4.1.333.1.10.1.1.1.28 | Columncntdot3DMATxWaitQ | read-only | mandatory | The number of buffers waiting in an outbound queue ready to transmitted to local memory from global memory. Buffers must be moved from global memory to local m… |
| 1.3.6.1.4.1.333.1.10.1.1.1.29 | Columncntdot3LPXParityErrs | read-only | mandatory | The number of local memory parity errors during an LPX memory cycle. |
| 1.3.6.1.4.1.333.1.10.1.1.1.30 | Columncntdot3Chan1Misreads | read-only | mandatory | The number of times a mismatch was detected between the DMA channel 1 table and the DMA Memory Access Register. |
| 1.3.6.1.4.1.333.1.10.2 | Nodecntfddi | |||
| 1.3.6.1.4.1.333.1.10.2.1 | NodecntFddiSMT | |||
| 1.3.6.1.4.1.333.1.10.2.1.1 | ScalarcntFddiSMTNumber | read-only | mandatory | The number of SMT implementations on this network management application entity. |
| 1.3.6.1.4.1.333.1.10.2.1.2 | TablecntFddiSMTTable | not-accessible | mandatory | A list of SMT entries. The number of entries is given by the value of snmpFddiSMTNumber. |
| 1.3.6.1.4.1.333.1.10.2.1.2.1 | RowcntFddiSMTEntry | not-accessible | mandatory | An SMT entry containing information common to a given SMT. |
| 1.3.6.1.4.1.333.1.10.2.1.2.1.1 | ColumncntFddiSMTIndex | read-only | mandatory | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. |
| 1.3.6.1.4.1.333.1.10.2.1.2.1.2 | ColumncntFddiSMTManufacturerData | read-only | optional | 32 octets of manufacturer data. The first component is the three octet Organizationally Unique Identifier (OUI) assigned by IEEE. The second component is the F… |
| 1.3.6.1.4.1.333.1.10.2.1.2.1.3 | ColumncntFddiSMTUserData | read-only | optional | 32 octets of user defined information. |
| 1.3.6.1.4.1.333.1.10.2.1.2.1.4 | ColumncntFddiSMTReportLimit | read-only | optional | Gives the limit on the number of Status Report Frames that shall be queued for transmission after supported Condition becomes inactive or after any supported E… |
| 1.3.6.1.4.1.333.1.10.2.1.2.1.5 | ColumncntFddiSMTMsgTimeStamp | read-only | mandatory | This timestamp is used in some SMT frames as an indication of the time the message was created at the sending station. When read, the accessed value shall be g… |
| 1.3.6.1.4.1.333.1.10.2.1.2.1.6 | ColumncntFddiSMTTransitionTimeStamp | read-only | mandatory | This timestamp holds the time of occurrence of the last condition or event in the station. It is used in the SMT Status Report Frame (SRF). It is set to a new … |
| 1.3.6.1.4.1.333.1.10.2.1.2.1.7 | ColumncntFddiSMTSetCount | read-only | optional | This count is updated each time a parameter is changed on behalf of a request from either the local management interface or the remote interface via SMT Parame… |
| 1.3.6.1.4.1.333.1.10.2.1.2.1.8 | ColumncntFddiSMTLastSetStationID | read-only | optional | This object identifies the last station to set MIB information in the FDDI MIB. |
| 1.3.6.1.4.1.333.1.10.2.2 | NodecntFddiMAC | |||
| 1.3.6.1.4.1.333.1.10.2.2.1 | ScalarcntFddiMACNumber | read-only | mandatory | The total number of MAC implementations across all SMTs on this network management application entity. |
| 1.3.6.1.4.1.333.1.10.2.2.2 | TablecntFddiMACTable | not-accessible | mandatory | A list of MAC entries. The number of entries is given by the value of snmpFddiMACNumber. |
| 1.3.6.1.4.1.333.1.10.2.2.2.1 | RowcntFddiMACEntry | not-accessible | mandatory | A MAC entry containing information common to a given MAC. |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.1 | ColumncntFddiMACSMTIndex | read-only | mandatory | The value of the SMT index associated with this MAC. |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.2 | ColumncntFddiMACIndex | read-only | mandatory | A unique value for each MAC on the managed entity. The MAC identified by a particular value of this index is that identified by the same value of an ifIndex ob… |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.3 | ColumncntFddiMACBridgeFunction | read-only | optional | Gives the bridge type for a MAC that has a bridge capability. |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.4 | ColumncntFddiMACDownstreamNbr | read-only | optional | The MAC's downstream neighbor's long individual MAC address. It may be determined by the Neighbor Information Frame Request/ Response protocol. It is optional … |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.5 | ColumncntFddiMACOldDownstreamNbr | read-only | optional | This object identifies this MAC's previous downstream neighbor. |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.6 | ColumncntFddiMACRootConcentratorMac | read-only | optional | A MAC in a concentrator is a root concentrator MAC if its transmit path exits the concentrator via a Port in a peer node; or if the MAC exits via a Port in a t… |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.7 | ColumncntFddiMACLongAlias | read-only | optional | A possibly null set of 48 bit addresses (aliases) for this MAC. |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.8 | ColumncntFddiMACShortAlias | read-only | optional | A possibly null set of 16 bit addresses (aliases) for this MAC. |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.9 | ColumncntFddiMACLongGrpAddr | read-only | optional | A possibly null set of 48 bit group addresses (aliases) for this MAC. |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.10 | ColumncntFddiMACShortGrpAddr | read-only | optional | A possibly null set of 16 bit group addresses (aliases) for this MAC. |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.11 | ColumncntFddiMACTPri0 | read-only | optional | Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2). |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.12 | ColumncntFddiMACTPri1 | read-only | optional | Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2). |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.13 | ColumncntFddiMACTPri2 | read-only | optional | Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2). |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.14 | ColumncntFddiMACTPri3 | read-only | optional | Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2). |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.15 | ColumncntFddiMACTPri4 | read-only | optional | Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2). |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.16 | ColumncntFddiMACTPri5 | read-only | optional | Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2). |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.17 | ColumncntFddiMACTPri6 | read-only | optional | Reference: Mac 2.2.1. It is reported as the unsigned twos-complement of the number (as described in the MAC specification; ref. MAC 7.3.5.2). |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.18 | ColumncntFddiMACCopies | read-only | optional | The count of frames successfully received into the station's receive buffers by this MAC. Note that this count does not include the frames that are not copied.… |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.19 | ColumncntFddiMACTransmits | read-only | optional | The count of frames transmitted by the MAC. |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.20 | ColumncntFddiMACTokens | read-only | optional | The total count of the number of times the station has received a token (total of non-restricted and restricted) on this MAC. This count is used for determinat… |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.21 | ColumncntFddiMACTvxExpires | read-only | optional | A count of the times that TVX expired. |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.22 | ColumncntFddiMACNotCopies | read-only | optional | The count of frames that should have been copied but were not. This might occur due to local buffer congestion. Because of implementation considerations, this … |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.23 | ColumncntFddiMACLates | read-only | optional | Reference: MAC 2.2.1, LateCt. |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.24 | ColumncntFddiMACRingOps | read-only | optional | The count of the number of times the ring has entered the 'Ring Operational' state from 'Ring Not Operational' state. Because of implementation considerations,… |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.25 | ColumncntFddiMACBaseFrames | read-only | optional | The value of FddiMACFrameCt at the sample time prior to the sample time when the FrameErrorThreshold was reached. It is used in reporting the condition to give… |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.26 | ColumncntFddiMACBaseErrs | read-only | optional | The value of FddiMACErrorCt at the sample time prior to the sample time when the FrameErrorThreshold was reached. It is used in reporting the condition to give… |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.27 | ColumncntFddiMACBaseLosts | read-only | optional | The value of FddiMACLostCt at the sample time prior to the sample time when the FrameErrorThreshold was reached. It is used in reporting the condition to give … |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.28 | ColumncntFddiMACBaseTimeFrameError | read-only | optional | The value of the station timer at the sample time prior to the sample time when the FrameErrorThreshold was reached. It is used in reporting the condition to g… |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.29 | ColumncntFddiMACBaseNotCopies | read-only | optional | The value of FddiMACNotCopiedCt at the sample time prior to the sample time when the NotCopiedThreshold was reached. It is used in reporting the condition to g… |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.30 | ColumncntFddiMACBaseTimeNotCopied | read-only | optional | The value of the station timer at the sample time prior to the sample time when the NotCopiedThreshold was reached. It is used in reporting the condition to gi… |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.31 | ColumncntFddiMACNotCopiedThreshold | read-only | optional | A threshold for determining when a MAC Condition report should be generated. It is used to determine when a station has an unacceptable count of frames 'not-co… |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.32 | ColumncntFddiMACBaseCopies | read-only | optional | The value of FddiMACCopiedCt at the sample time prior to the sample time when the NotCopiedThreshold was reached. It is used in reporting the condition to give… |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.33 | ColumncntFddiMACNotCopiedRatio | read-only | optional | This attribute is the value of the ratio: FddiMACNotCopiedCt FddiMACCopiedCt + FddiMACNotCopiedCt |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.34 | ColumncntFddiMACNotCopiedCondition | read-only | optional | Indicates the NotCopiedCondition is active when set. Cleared when the condition clears and on power up. |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.35 | ColumncntFddiMACLLCServiceAvailable | read-only | optional | Indicates whether the LLC Service is enabled. |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.36 | ColumncntFddiMACMasterSlaveLoopStatus | read-only | optional | Indicates this MAC's Master/Slave Loop Status. This status would be obtained with the Root MAC Information Protocol. |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.37 | ColumncntFddiMACRootMACDownStreamPORTType | read-only | optional | Indicates the PC-Type of the first PORT that is downstream of the Root MAC associated with this MAC. The Root MAC information would be determined in the Root M… |
| 1.3.6.1.4.1.333.1.10.2.2.2.1.38 | ColumncntFddiMACRootMACCurrentPath | read-only | optional | Indicates the current path of the Root MAC on the same logical ring as this MAC. This Root MAC information would be determined in the Root MAC Information Prot… |
| 1.3.6.1.4.1.333.1.10.2.3 | NodecntFddiPATH | |||
| 1.3.6.1.4.1.333.1.10.2.3.1 | ScalarcntFddiPATHNumber | read-only | mandatory | The total number of PATH implementations across all SMTs on this network management application entity. |
| 1.3.6.1.4.1.333.1.10.2.3.2 | TablecntFddiPATHTable | not-accessible | mandatory | A list of PATH entries. The number of entries is given by the value of snmpFddiPATHNumber. |
| 1.3.6.1.4.1.333.1.10.2.3.2.1 | RowcntFddiPATHEntry | not-accessible | mandatory | A PATH entry containing information common to a given PATH. |
| 1.3.6.1.4.1.333.1.10.2.3.2.1.1 | ColumncntFddiPATHSMTIndex | read-only | mandatory | The value of the SMT index associated with this PATH. |
| 1.3.6.1.4.1.333.1.10.2.3.2.1.2 | ColumncntFddiPATHIndex | read-only | mandatory | A unique value for each PATH within a given SMT. Its value ranges between 1 and the sum of the values of snmpFddiSMTNonMasterCt and snmpFddiSMTMasterCt on the … |
| 1.3.6.1.4.1.333.1.10.2.3.2.1.3 | ColumncntFddiPATHTraceMaxExpiration | read-only | mandatory | Reference: SMT 9.4.4.2.2 TraceMax. |
| 1.3.6.1.4.1.333.1.10.2.3.2.1.4 | ColumncntFddiPATHTVXLowerBound | read-only | optional | The lower bound of TVX supported for this PATH. |
| 1.3.6.1.4.1.333.1.10.2.3.2.1.5 | ColumncntFddiPATHTMaxLowerBound | read-only | optional | The lower bound of TMax supported for this PATH class. |
| 1.3.6.1.4.1.333.1.10.2.3.2.1.6 | ColumncntFddiPATHType | read-only | mandatory | This object describes the type of PATH: 1 = Primary, 2 = Secondary, 3 = Local. |
| 1.3.6.1.4.1.333.1.10.2.3.2.1.7 | ColumncntFddiPATHPORTOrder | read-only | mandatory | Tells whether the PORTs on this path are numbered in ascending of descending order. |
| 1.3.6.1.4.1.333.1.10.2.3.2.1.8 | ColumncntFddiPATHRingLatency | read-only | optional | Gives the total accumulated latency of the ring associated with this PATH. May be measured directly by the station or may be calculated by a management station. |
| 1.3.6.1.4.1.333.1.10.2.3.2.1.9 | ColumncntFddiPATHTraceStatus | read-only | optional | Gives the current trace status of the PATH. |
| 1.3.6.1.4.1.333.1.10.2.3.2.1.10 | ColumncntFddiPATHSba | read-only | mandatory | The Synchronous Bandwidth Allocation for this PATH within the station in octet units. In stations that don't support synchronous service, this attribute is rea… |
| 1.3.6.1.4.1.333.1.10.2.3.2.1.11 | ColumncntFddiPATHSbaOverhead | read-only | mandatory | The Synchronous Bandwidth Allocation overhead for this PATH (bytes/frame). In stations that don't support synchronous service, this attribute is read only and … |
| 1.3.6.1.4.1.333.1.10.2.3.2.1.12 | ColumncntFddiPATHStatus | read-only | mandatory | The current status of the PATH. |
| 1.3.6.1.4.1.333.1.10.2.3.2.1.13 | ColumncntFddiPATHTRmode | read-only | optional | Used by RMT to limit the duration of restricted dialogs on a PATH. |
| 1.3.6.1.4.1.333.1.10.2.4 | NodecntFddiPORT | |||
| 1.3.6.1.4.1.333.1.10.2.4.1 | ScalarcntFddiPORTNumber | read-only | mandatory | The total number of PORT implementations across all SMTs on this network management application entity. |
| 1.3.6.1.4.1.333.1.10.2.4.2 | TablecntFddiPORTTable | not-accessible | mandatory | A list of PORT entries. The number of entries is given by the value of snmpFddiPORTNumber. |
| 1.3.6.1.4.1.333.1.10.2.4.2.1 | RowcntFddiPORTEntry | not-accessible | mandatory | A PORT entry containing information common to a given PORT. |
| 1.3.6.1.4.1.333.1.10.2.4.2.1.1 | ColumncntFddiPORTSMTIndex | read-only | mandatory | The value of the SMT index associated with this PORT. |
| 1.3.6.1.4.1.333.1.10.2.4.2.1.2 | ColumncntFddiPORTIndex | read-only | mandatory | A unique value for each PORT within a given SMT. Its value ranges between 1 and the sum of the values of snmpFddiSMTNonMasterCt and snmpFddiSMTMasterCt on the … |
| 1.3.6.1.4.1.333.1.10.2.4.2.1.3 | ColumncntFddiPORTFotxClass | read-only | optional | The Fiber Optic Transmitter Class. |
| 1.3.6.1.4.1.333.1.10.2.4.2.1.4 | ColumncntFddiPORTMaintLineState | read-only | optional | The current maintenance line status of this PORT. |
| 1.3.6.1.4.1.333.1.10.2.4.2.1.5 | ColumncntFddiPORTEBErrs | read-only | optional | The count of the times an Elasticity Buffer Error has occurred. |
| 1.3.6.1.4.1.333.1.10.2.4.2.1.6 | ColumncntFddiPORTBaseLerEstimate | read-only | mandatory | The value of FddiPORTLerEstimate at the sample time prior to when the sample time that the PORT LER Event was generated (the condition became active). |
| 1.3.6.1.4.1.333.1.10.2.4.2.1.7 | ColumncntFddiPORTBaseLemRejects | read-only | mandatory | The value of FddiPORTLerRejectCt at the sample time prior to when the sample time that the PORT LER Event was generated (the condition became active). |
| 1.3.6.1.4.1.333.1.10.2.4.2.1.8 | ColumncntFddiPORTBaseLems | read-only | mandatory | The value of FddiPORTLerCt at the sample time prior to when the sample time that the PORT LER Event was generated (the condition became active). |
| 1.3.6.1.4.1.333.1.10.2.4.2.1.9 | ColumncntFddiPORTBaseLerTimeStamp | read-only | mandatory | The value of FddiSMTMsgTimestamp at the sample time prior to when the sample time that the PORT LER Event was generated (the condition became active). |
| 1.3.6.1.4.1.333.1.11 | Nodecntsnmp | |||
| 1.3.6.1.4.1.333.1.11.1 | Nodecntsnmpconfig | |||
| 1.3.6.1.4.1.333.1.11.1.1 | ScalarcntMibVersion | read-only | mandatory | The version identifier of the mib file that the agent has loaded from BBRAM. |
| 1.3.6.1.4.1.333.1.11.1.2 | ScalarcntMibObjectCount | read-only | mandatory | Number of objects in the MIB description file, !MIB, in this CNT platform. This file contains objects from RFC 1213, RFC 1284, RFC 1285, and CNT's enterprise. … |
| 1.3.6.1.4.1.333.1.11.1.3 | ScalarcntConfigVersion | read-only | mandatory | Version number of this SNMP agent from the configuration record. |
| 1.3.6.1.4.1.333.1.11.1.4 | ScalarcntProxyStatus | read-only | mandatory | This flag indicates whether this SNMP agent is acting as a proxy, is being proxied, or is a normally behaving SNMP agent. |
| 1.3.6.1.4.1.333.1.11.1.5 | ScalarcntProxyCount | read-only | mandatory | If this node is configured to operate as a proxy agent, this number reflects the number of proxied nodes that this node is configured to manage in !NDE. |
| 1.3.6.1.4.1.333.1.11.1.6 | ScalarcntSnmpBufferCount | read-only | mandatory | Number of buffers reserved for this SNMP agent for outgoing message from the configuration record. |
| 1.3.6.1.4.1.333.1.11.1.7 | ScalarcntIfPollInterval | read-only | mandatory | Number of seconds for the SNMP agent to wait between checks of the CNT platform's interfaces for operation status. These interface checks result in the link do… |
| 1.3.6.1.4.1.333.1.11.1.8 | ScalarcntIfNextPoll | read-only | mandatory | Number of seconds for the next internal SNMP agent interface poll. These interface checks result in the link down and link up traps. This value is from the con… |
| 1.3.6.1.4.1.333.1.11.1.9 | ScalarcntDoDIPCount | read-only | mandatory | The number of DoD IP addresses (internet records in !CFG) configured in this node that the agent detected upon startup. This will not equal the number of inter… |
| 1.3.6.1.4.1.333.1.11.1.10 | ScalarcntDot3Count | read-only | mandatory | The number of ethernet interfaces that are manageable by this agent on this node. |
| 1.3.6.1.4.1.333.1.11.1.11 | ScalarcntFddiCount | read-only | mandatory | The number of FDDI interfaces that are manageable by this agent on this node. |
| 1.3.6.1.4.1.333.1.11.1.12 | ScalarcntFddiPortCount | read-only | mandatory | The number of FDDI ports that are manageable by this agent on this node. |
| 1.3.6.1.4.1.333.1.11.1.13 | ScalarcntDataLinkCount | read-only | mandatory | The number of Data Link Layers Instances that are manageable by this agent on this node. |
| 1.3.6.1.4.1.333.1.11.1.14 | ScalarcntLLC1Count | read-only | mandatory | The number of Data Link Layers Instances of type Logical Link Control 1 (ISO 8802/2) that are manageable by this agent on this node. |
| 1.3.6.1.4.1.333.1.11.1.15 | ScalarcntCofiVersion | read-only | mandatory | The version of the the COmmon File Interface (COFI) module that is loaded into this node. COFI is required by the snmp agent for access to some CNT system obje… |
| 1.3.6.1.4.1.333.1.11.2 | Nodecntsnmpstat | |||
| 1.3.6.1.4.1.333.1.11.2.1 | ScalarcntMib2Requests | read-only | mandatory | The number of requests received by the agent for mib-2 objects. |
| 1.3.6.1.4.1.333.1.11.2.2 | ScalarcntFddiRequests | read-only | mandatory | The number of requests received by the agent for FDDI objects in the experimental or transmission subtree. |
| 1.3.6.1.4.1.333.1.11.2.3 | ScalarcntDot3Requests | read-only | mandatory | The number of requests received by the agent for 802.3 objects in the experimental or transmission subtree. |
| 1.3.6.1.4.1.333.1.11.2.4 | ScalarcntCntRequests | read-only | mandatory | The number of requests received by the agent for objects in the Computer Network Technology Corp. private enterprise subtree. |
| 1.3.6.1.4.1.333.1.11.2.5 | ScalarcntRowAdditions | read-only | mandatory | The number of table row additions that have been successful through SNMP requests from a network management station. |
| 1.3.6.1.4.1.333.1.11.2.6 | ScalarcntRowModifies | read-only | mandatory | The number of table row modifications that have been successful through SNMP requests from a network management station. |
| 1.3.6.1.4.1.333.1.11.2.7 | ScalarcntRowDeletions | read-only | mandatory | The number of table row deletions that have been successful through SNMP requests from a network management station. |
| 1.3.6.1.4.1.333.1.11.2.8 | ScalarcntRowErrors | read-only | mandatory | The number of table row additions that were attempted through SNMP requests from a network management station, but were not complete in a single request. These… |
| 1.3.6.1.4.1.333.1.11.2.9 | ScalarcntBadVersions | read-only | mandatory | The number of table row additions that were attempted through SNMP requests from a network management station, but were not complete in a single request. These… |
| 1.3.6.1.4.1.333.1.11.2.10 | ScalarcntNoBuffers | read-only | mandatory | The number of times the agent needed a buffer and did not have one. The agent uses buffers when making requests to the MEs. |
| 1.3.6.1.4.1.333.1.11.2.11 | ScalarcntMailTimeouts | read-only | mandatory | The number of timeouts received from the MEs when a mib request was given. |
| 1.3.6.1.4.1.333.1.11.2.12 | ScalarcntCachedResponses | read-only | mandatory | The number of requests to the MEs that were cached. Each cached message contains as many mib objects as the request to the ME. |
| 1.3.6.1.4.1.333.1.11.2.13 | ScalarcntUsedCaches | read-only | mandatory | The number of objects for which the cached mib objects were used. |
| 1.3.6.1.4.1.333.1.11.3 | Nodecntsnmptrap | |||
| 1.3.6.1.4.1.333.1.11.3.1 | ScalarcntTrapDestCount | read-only | mandatory | The number of trap destinations that the agent will forward the configured traps to. |
| 1.3.6.1.4.1.333.1.11.3.2 | ScalarcntLastTrapMsg | read-only | mandatory | Textual description of the last trap message sent from this SNMP agent. The object identifier for cntSysLastTrapMsg is sent along with each trap. |
| 1.3.6.1.4.1.333.1.11.3.3 | TablecntTrapTable | not-accessible | mandatory | A list of trap entries. There is a maximum of six trap entries. These values, except TrapIf, are set in the configuration record. |
| 1.3.6.1.4.1.333.1.11.3.3.1 | RowcnttrapEntry | not-accessible | mandatory | A trap entry containing the information needed to send out a trap. |
| 1.3.6.1.4.1.333.1.11.3.3.1.1 | ColumncnttrapIndex | read-only | mandatory | Trap table index. |
| 1.3.6.1.4.1.333.1.11.3.3.1.2 | ColumncnttrapAddress | read-only | mandatory | Trap destination address. |
| 1.3.6.1.4.1.333.1.11.3.3.1.3 | ColumncntsnmpTrapFlags | read-only | mandatory | Flag setting specifying which types of traps to send to this destination. This value is derived from 'or'ing the following values: cold start(0x01), link down(… |
| 1.3.6.1.4.1.333.1.11.3.3.1.4 | ColumncntTrapFlags | read-only | mandatory | Flag settings reserved for future enterprise specific trap enabling. |
| 1.3.6.1.4.1.333.1.11.3.3.1.5 | ColumncnttrapIf | read-only | mandatory | Trap source address. |
| 1.3.6.1.4.1.333.1.11.4 | Nodecntsnmpproxy | |||
| 1.3.6.1.4.1.333.1.11.4.1 | TablecntProxyTable | not-accessible | mandatory | A list of proxy entries. This table contains an entry for each proxied node from this proxy agent. If this node is not configured as a proxy agent then this ta… |
| 1.3.6.1.4.1.333.1.11.4.1.1 | RowcntproxyEntry | not-accessible | mandatory | A proxy entry containing the information needed to carry an SNMP request to a proxied node. |
| 1.3.6.1.4.1.333.1.11.4.1.1.1 | ColumncntproxyIndex | read-only | mandatory | Proxy table index. |
| 1.3.6.1.4.1.333.1.11.4.1.1.2 | ColumncntproxyAddress | read-only | mandatory | Proxied node destination DoD IP address that is used by the NMS. |
| 1.3.6.1.4.1.333.1.11.4.1.1.3 | ColumncntproxyNode | read-only | mandatory | Proxied node destination CNT node address that is used by the local CNT router to access the destination. |
| 1.3.6.1.4.1.333.1.12 | Nodecntdiagnostics | |||
| 1.3.6.1.4.1.333.1.12.1 | TablecntTraceTable | not-accessible | mandatory | List of entries in the global trace area. |
| 1.3.6.1.4.1.333.1.12.1.1 | RowcnttraceEntry | not-accessible | mandatory | A trace entry. |
| 1.3.6.1.4.1.333.1.12.1.1.1 | ColumncnttraceIndex | read-only | mandatory | The index which uniquely identifies the trace row instance in a CNT node. |
| 1.3.6.1.4.1.333.1.12.1.1.2 | ColumncnttraceType | read-only | mandatory | The type of trace entry. |
| 1.3.6.1.4.1.333.1.12.1.1.3 | ColumncnttraceCpu | read-only | mandatory | The CPU number of the module that entered this trace entry. |
| 1.3.6.1.4.1.333.1.12.1.1.4 | ColumncnttraceData | read-only | mandatory | The remaining 14 octets of trace information. |
| 1.3.6.1.4.1.333.1.12.2 | NodecntMailQueue | |||
| 1.3.6.1.4.1.333.1.12.2.1 | TablecntMDMTable | not-accessible | mandatory | A list of Message Distribution Manager (MDM) interprocessor queue global table entries. |
| 1.3.6.1.4.1.333.1.12.2.1.1 | RowcntMDMEntry | not-accessible | mandatory | A Message Distribution Manager (MDM) queue global table entry. |
| 1.3.6.1.4.1.333.1.12.2.1.1.1 | ColumncntmdmQIndex | read-only | mandatory | The relative index of the MDM entry in the system's global table. |
| 1.3.6.1.4.1.333.1.12.2.1.1.2 | ColumncntmdmQName | read-only | mandatory | The MDM queue name for this entry in the system global table. |
| 1.3.6.1.4.1.333.1.12.2.1.1.3 | ColumncntmdmQProcessId | read-only | mandatory | The MDM processor number for this entry in the system global table. |
| 1.3.6.1.4.1.333.1.12.2.1.1.4 | ColumncntmdmQTaskId | read-only | mandatory | The MDM task identifier for this entry in the system global table. |
| 1.3.6.1.4.1.333.1.12.2.2 | ScalarcntmdmQList | read-only | mandatory | The MDM queue name list in one long string. |
| 1.3.6.1.4.1.333.1.13 | Nodecntdatalink | |||
| 1.3.6.1.4.1.333.1.13.1 | ScalarcntdlNumber | read-only | mandatory | The number of network data link layers present on this system. |
| 1.3.6.1.4.1.333.1.13.2 | TablecntdlTable | not-accessible | mandatory | A list of data link layer entries. The number of entries is given by the value of cntdlNumber. |
| 1.3.6.1.4.1.333.1.13.2.1 | RowcntdlEntry | not-accessible | mandatory | A data link layer entry containing objects for a particular data link layer. |
| 1.3.6.1.4.1.333.1.13.2.1.1 | ColumncntdlIndex | read-only | mandatory | A unique value for each data link layer. It's value ranges between one and the value of dlNumber. The value for each data link layer must remain constant at le… |
| 1.3.6.1.4.1.333.1.13.2.1.2 | ColumncntdlDescr | read-only | mandatory | A textual string containing information about the data link layer. This string should include the name of the manufacturer, the product name and the version of… |
| 1.3.6.1.4.1.333.1.13.2.1.3 | ColumncntdlType | read-only | mandatory | The type of this data link layer. |
| 1.3.6.1.4.1.333.1.13.2.1.4 | ColumncntdlTypeofService | read-only | mandatory | The type of this data link layer service. |
| 1.3.6.1.4.1.333.1.13.2.1.5 | ColumncntdlMtu | read-only | mandatory | The size of the largest datagram which can be sent/received on this data link layer, specified in octets. |
| 1.3.6.1.4.1.333.1.13.2.1.6 | ColumncntdlPortAddrLen | read-only | mandatory | The length of all port addresses used by this data link layer service. |
| 1.3.6.1.4.1.333.1.13.2.1.7 | ColumncntdlMaxPort | read-only | mandatory | The maximum number of ports supported by this data link layer service. |
| 1.3.6.1.4.1.333.1.13.2.1.8 | ColumncntdlActivePort | read-only | mandatory | The current number of active ports. |
| 1.3.6.1.4.1.333.1.13.2.1.9 | ColumncntdlInOctets | read-only | mandatory | The total number of octets received on this data link layer. |
| 1.3.6.1.4.1.333.1.13.2.1.10 | ColumncntdlInUcastPkts | read-only | mandatory | The number of unicast packets delivered to a higher layer protocol. |
| 1.3.6.1.4.1.333.1.13.2.1.11 | ColumncntdlInNUcastPkts | read-only | mandatory | The number of non-unicast packets delivered to a higher layer protocol. |
| 1.3.6.1.4.1.333.1.13.2.1.12 | ColumncntdlInDiscards | read-only | mandatory | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher layer pr… |
| 1.3.6.1.4.1.333.1.13.2.1.13 | ColumncntdlInErrors | read-only | mandatory | The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
| 1.3.6.1.4.1.333.1.13.2.1.14 | ColumncntdlInUnknownProtos | read-only | mandatory | The number of packets received via the data link layer which were discareded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.333.1.13.2.1.15 | ColumncntdlOutOctets | read-only | mandatory | The total number of octets transmitted by this this data link layer service. |
| 1.3.6.1.4.1.333.1.13.2.1.16 | ColumncntdlOutUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted to a unicast address, including those that were discarded or not sent. |
| 1.3.6.1.4.1.333.1.13.2.1.17 | ColumncntdlOutNUcastPkts | read-only | mandatory | The total number of packets that higher-level protocols requested be transmitted to a non-unicast address, including those that were discarded or not sent. |
| 1.3.6.1.4.1.333.1.13.2.1.18 | ColumncntdlOutDiscards | read-only | mandatory | The number of outbound packets which were chose to be discarded even though no errors had been detected to prevent their being transmitted. |
| 1.3.6.1.4.1.333.1.13.2.1.19 | ColumncntdlOutErrors | read-only | mandatory | The number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.4.1.333.1.13.2.1.20 | ColumncntdlOutQLen | read-only | mandatory | The length of the output packet queue, in packets. |
| 1.3.6.1.4.1.333.1.13.2.1.21 | TablecntdlPortTable | not-accessible | mandatory | A list of data link layer entries. The number of entries is given by the value of dlActivePorts. |
| 1.3.6.1.4.1.333.1.13.2.1.21.1 | RowcntdlPortEntry | not-accessible | mandatory | A data link layer entry containing objects for a particular port. |
| 1.3.6.1.4.1.333.1.13.2.1.21.1.1 | ColumncntdlPortIndex | read-only | mandatory | The port entry's index. |
| 1.3.6.1.4.1.333.1.13.2.1.21.1.2 | ColumncntdlState | read-only | mandatory | The state of this port. |
| 1.3.6.1.4.1.333.1.13.2.1.21.1.3 | ColumncntdlSourcePort | read-only | mandatory | The source port number. |
| 1.3.6.1.4.1.333.1.13.2.1.21.1.4 | ColumncntdlDestPort | read-only | mandatory | The destination port number. |
| 1.3.6.1.4.1.333.1.13.2.1.21.1.5 | ColumncntdlPortType | read-only | mandatory | The port type. This value is not redundant to dlType since a link layer service may support multiple port types. For example, LLC1 has both llc1 and snap ports. |
| 1.3.6.1.4.1.333.1.13.3 | Nodecntllc1 | |||
| 1.3.6.1.4.1.333.1.13.3.1 | Tablecntllc1ConfigTable | not-accessible | mandatory | A list of the LLC1 configuration entries. |
| 1.3.6.1.4.1.333.1.13.3.1.1 | Rowcntllc1ConfigEntry | not-accessible | mandatory | A LLC1 configuration entry. |
| 1.3.6.1.4.1.333.1.13.3.1.1.1 | Columncntllc1ConfigIndex | read-only | mandatory | The index that uniquely identifies an instance of a LLC1 process in a CNT node. |
| 1.3.6.1.4.1.333.1.13.3.1.1.2 | Columncntllc1DriverType | read-only | mandatory | The physical layer device driver type that has identified to this llc1 service. |
| 1.3.6.1.4.1.333.1.13.3.1.1.3 | Columncntllc1Addr | read-only | mandatory | The MAC address for the physical layer over which this link layer is operating. |
| 1.3.6.1.4.1.333.1.13.3.1.1.4 | Columncntllc1InitFlag | read-only | mandatory | The initialization flag indicating whether or not this module has finished initializing the data link layer stack. |
| 1.3.6.1.4.1.333.1.13.3.1.1.5 | Columncntllc1TraceFlag | read-only | mandatory | The trace flags in bit-oriented form. The values are as follows: .... ...1 - phase 2 entry point .... ..1. - phase 3 entry point .... .1.. - messages in .... 1… |
| 1.3.6.1.4.1.333.1.13.3.1.1.6 | Columncntllc1BufCnt | read-only | mandatory | The number of free buffers in the free pool. |
| 1.3.6.1.4.1.333.1.13.3.1.1.7 | Columncntllc1BusId | read-only | mandatory | The bus number for this network interface. |
| 1.3.6.1.4.1.333.1.13.3.1.1.8 | Columncntllc1CpuNum | read-only | mandatory | The CPU number where this data link layer is running, 1 through 8. |
| 1.3.6.1.4.1.333.1.13.3.1.1.9 | Columncntllc1BufPriority | read-only | mandatory | The assigned buffer priority for messages received from the physical layer. |
| 1.3.6.1.4.1.333.1.13.3.1.1.10 | Columncntllc1WaitTimeOut | read-only | mandatory | The wait timeout in seconds for XID/TEST frames sent to a peer llc1 data link layer. |
| 1.3.6.1.4.1.333.1.13.3.2 | Tablecntllc1StatsTable | not-accessible | mandatory | A list of LLC1 statistics entries. |
| 1.3.6.1.4.1.333.1.13.3.2.1 | Rowcntllc1StatsEntry | not-accessible | mandatory | A LLC1 statistics entry. |
| 1.3.6.1.4.1.333.1.13.3.2.1.1 | Columncntllc1StatIndex | read-only | mandatory | The index that uniquely identifies an instance of a LLC1 process in a CNT node. |
| 1.3.6.1.4.1.333.1.13.3.2.1.2 | Columncntllc1InXids | read-only | mandatory | The number of LLC XID frames received from a peer data link layer. |
| 1.3.6.1.4.1.333.1.13.3.2.1.3 | Columncntllc1InTests | read-only | mandatory | The number of LLC TEST frames received from a peer data link layer. |
| 1.3.6.1.4.1.333.1.13.3.2.1.4 | Columncntllc1InUIs | read-only | mandatory | The number of LLC UI frames received from a peer data link layer. |
| 1.3.6.1.4.1.333.1.13.3.2.1.5 | Columncntllc1InNoDsaps | read-only | mandatory | The number of unknown DSAPs received from a peer data link layer. |
| 1.3.6.1.4.1.333.1.13.3.2.1.6 | Columncntllc1InXidOks | read-only | mandatory | The number of successful LLC XID frames from a peer data link layer. |
| 1.3.6.1.4.1.333.1.13.3.2.1.7 | Columncntllc1InTestOks | read-only | mandatory | The number of successful LLC TEST frames from a peer data link layer. |
| 1.3.6.1.4.1.333.1.13.3.2.1.8 | Columncntllc1InSnapIps | read-only | mandatory | The number of SNAP IP packets received from a peer SNAP. |
| 1.3.6.1.4.1.333.1.13.3.2.1.9 | Columncntllc1InSnapArps | read-only | mandatory | The number of SNAP ARP packets received from a peer SNAP. |
| 1.3.6.1.4.1.333.1.13.3.2.1.10 | Columncntllc1InSnapNoProts | read-only | mandatory | The number of unknown SNAP protocols received from a peer SNAP. |
| 1.3.6.1.4.1.333.1.13.3.2.1.11 | Columncntllc1InSnapNoTypes | read-only | mandatory | The number of unknown SNAP ethertypes received from a peer SNAP. |
| 1.3.6.1.4.1.333.1.13.3.2.1.12 | Columncntllc1OutSnapIps | read-only | mandatory | The number of SNAP IP packets sent to a peer SNAP. |
| 1.3.6.1.4.1.333.1.13.3.2.1.13 | Columncntllc1OutSnapArps | read-only | mandatory | The number of SNAP ARP packets sent to a peer SNAP. |
| 1.3.6.1.4.1.333.1.13.3.2.1.14 | Columncntllc1OutXids | read-only | mandatory | The number of LLC XID requests sent to a peer data link layer. |
| 1.3.6.1.4.1.333.1.13.3.2.1.15 | Columncntllc1OutXidResps | read-only | mandatory | The number of LLC XID responses received from a peer data link layer. |
| 1.3.6.1.4.1.333.1.13.3.2.1.16 | Columncntllc1OutTests | read-only | mandatory | The number of LLC TEST requests sent to a peer data link layer. |
| 1.3.6.1.4.1.333.1.13.3.2.1.17 | Columncntllc1OutTestResps | read-only | mandatory | The number of LLC TEST responses sent to a peer data link layer. |
| 1.3.6.1.4.1.333.1.13.3.2.1.18 | Columncntllc1OutRetOks | read-only | mandatory | The number of packets passed successfully to the physical layer. |
| 1.3.6.1.4.1.333.1.13.3.2.1.19 | Columncntllc1OutFragPkts | read-only | mandatory | The number of packet sent with fragments. |
| 1.3.6.1.4.1.333.1.13.3.3 | Tablecntllc1ErrorTable | not-accessible | mandatory | A list of LLC1 error entries. |
| 1.3.6.1.4.1.333.1.13.3.3.1 | Rowcntllc1ErrorEntry | not-accessible | mandatory | A LLC1 error entry. |
| 1.3.6.1.4.1.333.1.13.3.3.1.1 | Columncntllc1ErrorIndex | read-only | mandatory | The index that uniquely identifies an instance of a LLC1 process in a CNT node. |
| 1.3.6.1.4.1.333.1.13.3.3.1.2 | Columncntllc1ArpMailErrs | read-only | mandatory | The number of errors encountered when mailing to ARP. |
| 1.3.6.1.4.1.333.1.13.3.3.1.3 | Columncntllc1IpMailErrs | read-only | mandatory | The number of errors encountered when mailing to IP. |
| 1.3.6.1.4.1.333.1.13.3.3.1.4 | Columncntllc1OutXmitErrs | read-only | mandatory | The number of times and error was received from the physical layer when a transmission was attempted by this data link layer. |
| 1.3.6.1.4.1.333.1.13.3.3.1.5 | Columncntllc1OutMcastErrs | read-only | mandatory | The number of times and error was received from the physical layer when a multicast message was attempted by this data link layer. |
| 1.3.6.1.4.1.333.1.13.3.3.1.6 | Columncntllc1XidErrs | read-only | mandatory | The number of times and error was received from the physical layer when an LLC XID message was attempted by this data link layer. |
| 1.3.6.1.4.1.333.1.13.3.3.1.7 | Columncntllc1TestErrs | read-only | mandatory | The number of times and error was received from the physical layer when an LLC TEST message was attempted by this data link layer. |
| 1.3.6.1.4.1.333.1.13.3.3.1.8 | Columncntllc1InBadTypes | read-only | mandatory | The number of messages received from a peer data link layer with invalid or unsupported LLC type fields. |
| 1.3.6.1.4.1.333.1.13.3.3.1.9 | Columncntllc1OutMismIpSizes | read-only | mandatory | The number of messages received from a ULP that has an included IP header that indicates the message size is smaller than the actual size of the message. |
| 1.3.6.1.4.1.333.1.13.3.3.1.10 | Columncntllc1OutBadIpSizes | read-only | mandatory | The number of messages received from a ULP that has an included IP header that indicates the message size is larger than the actual size of the message. |
| 1.3.6.1.4.1.333.1.13.3.3.1.11 | Columncntllc1InMismIpSizes | read-only | mandatory | The number of messages received from a physical layer that has an included IP header that indicates the message size is smaller than the actual size of the mes… |
| 1.3.6.1.4.1.333.1.13.3.3.1.12 | Columncntllc1InBadIpSizes | read-only | mandatory | The number of messages received from a physical layer that has an included IP header that indicates the message size is larger than the actual size of the mess… |
| 1.3.6.1.4.1.333.1.13.3.3.1.13 | Columncntllc1InLateXids | read-only | mandatory | The number of times an LLC XID request was sent to a peer data link layer and the return reponse was late or invalid. |
| 1.3.6.1.4.1.333.1.13.3.3.1.14 | Columncntllc1InLateTests | read-only | mandatory | The number of times an LLC TEST request was sent to a peer data link layer and the return reponse was late or invalid. |
| 1.3.6.1.4.1.333.1.13.3.3.1.15 | Columncntllc1OutTooBigs | read-only | mandatory | The number of times this link layer service could not build the outgoing message due to a Maximum Transmission Unit (MTU) limitation. |
| 1.3.6.1.4.1.333.1.13.3.3.1.16 | Columncntllc1OutNoRooms | read-only | mandatory | The number of times this data link layer service could not build the outgoing message due to lack of space in the s_message area of the buffer. |
| 1.3.6.1.4.1.333.1.13.3.3.1.17 | Columncntllc1OutRetBads | read-only | mandatory | The number of times the physical layer returned an error upon return of the message to this data link layer service. |
| 1.3.6.1.4.1.333.1.14 | Nodecntlua | |||
| 1.3.6.1.4.1.333.1.14.1 | ScalarcntLuaCount | read-only | mandatory | The number of Logical Unit Adaptors (LUAs) present on this system. |
| 1.3.6.1.4.1.333.1.14.2 | TablecntLuaTable | not-accessible | mandatory | A list of entries describing an individual Logical Unit Adaptor (LUA). A specific lua object is terminated with the channel number. |
| 1.3.6.1.4.1.333.1.14.2.1 | RowcntluaEntry | not-accessible | mandatory | An individual LUA entry. |
| 1.3.6.1.4.1.333.1.14.2.1.1 | ColumncntluaIf | read-only | mandatory | The corresponding SNMP interface index for this LUA. |
| 1.3.6.1.4.1.333.1.14.2.1.2 | ColumncntluaNumber | read-only | mandatory | The LUA number (0-255). |
| 1.3.6.1.4.1.333.1.14.2.1.3 | ColumncntSubChanCount | read-only | mandatory | The number of subchannels on the LUA (0-255). |
| 1.3.6.1.4.1.333.1.14.2.1.4 | TablecntSubChanTable | not-accessible | mandatory | A list of entries describing an individual subchannel. A specific subchannel object is referenced from the LUA table with instance object identifiers .lua.subc… |
| 1.3.6.1.4.1.333.1.14.2.1.4.1 | RowcntsubchanEntry | not-accessible | mandatory | An individual subchannel entry. |
| 1.3.6.1.4.1.333.1.14.2.1.4.1.1 | ColumncntsctIndex | read-only | mandatory | The relative subchannel index for this lua. |
| 1.3.6.1.4.1.333.1.14.2.1.4.1.2 | ColumncntsctNumber | read-only | mandatory | The sub-channel number (0-255). |
| 1.3.6.1.4.1.333.1.14.2.1.4.1.3 | ColumncntsctTxStatus | read-only | mandatory | Bit value for the transmit status. Bit Definition 0 Transmit to be cancelled 4 Transmit in operation 8 Buffer available to subchannel 9 Subchannel ready to acc… |
| 1.3.6.1.4.1.333.1.14.2.1.4.1.4 | ColumncntsctRxStatus | read-only | mandatory | Bit value for the receive status. Bit Definition 0 Receive operation begun from host 1 Receive enabled/disabled 2 Cancel current receive message sequence 3 Pen… |
| 1.3.6.1.4.1.333.1.14.2.1.4.1.5 | ColumncntsctSubChanStatus | read-only | mandatory | Bit value for the device subchannel status. Bit Definition 0 Subchannel is allocated 1 Subchannel is established 2 Subchannel is sharable 3 Subchannel has dedi… |
| 1.3.6.1.4.1.333.1.14.2.1.4.1.6 | ColumncntsctState | read-only | mandatory | Bit value for the subchannel state. Bit Definition 0 Wait flag 1 Subchannel busy 2 Pending command retry 3 Pending completion status 4 Pending unsolicited stat… |
| 1.3.6.1.4.1.333.1.14.2.1.4.1.7 | ColumncntsctRxCredit | read-only | mandatory | Current receive buffer credit. |
| 1.3.6.1.4.1.333.1.14.2.1.4.1.8 | ColumncntsctRxMsgs | read-only | mandatory | Receive message count. |
| 1.3.6.1.4.1.333.1.14.2.1.4.1.9 | ColumncntsctRxMsgBytes | read-only | mandatory | Receive message byte count. |
| 1.3.6.1.4.1.333.1.14.2.1.4.1.10 | ColumncntsctRxDataBytes | read-only | mandatory | Receive data byte count. |
| 1.3.6.1.4.1.333.1.14.2.1.4.1.11 | ColumncntsctTxMsgs | read-only | mandatory | Transmit message count. |
| 1.3.6.1.4.1.333.1.14.2.1.4.1.12 | ColumncntsctTxMsgBytes | read-only | mandatory | Transmit message byte count. |
| 1.3.6.1.4.1.333.1.14.2.1.4.1.13 | ColumncntsctTxDataBytes | read-only | mandatory | Transmit data byte count. |
| 1.3.6.1.4.1.333.1.14.2.1.4.1.14 | ColumncntsctTxErrMsgs | read-only | mandatory | Transmit error message count. |
| 1.3.6.1.4.1.333.1.14.2.1.4.1.15 | ColumncntsctTotalBytes | read-only | mandatory | Total number of bytes transmitted and received for this subchannel. |
| 1.3.6.1.4.1.333.1.14.2.1.4.1.16 | ColumncntsctDrecPid | read-only | mandatory | Channel PID name. |
| 1.3.6.1.4.1.333.1.14.2.1.4.1.17 | ColumncntsctDrecTask | read-only | mandatory | Device specific driver task name. |