MIB Viewer

COM21-HCXCC-MIB

41 objects
This is the Com21 ComController Common Control Unit MIB module. COM21 Part# 005-0025-00
Imported Objects
COM21-HCX-MIBcom21 com21Hcx com21Traps
COM21-HCXALM-MIBhcxAlmSeverity hcxEventLogTime
SNMPv2-SMIGauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCDisplayString
OIDNameAccessStatusDescription
1.3.6.1.4.1.1141.2.60Identitycom21HcxCcThis is the Com21 ComController Common Control Unit MIB module. COM21 Part# 005-0025-00
1.3.6.1.4.1.1141.2.61Nodecom21HcxCcUnitGroup
1.3.6.1.4.1.1141.2.61.1ScalarhcxCcShelfIdread-onlycurrentcontains the associated shelf id.
1.3.6.1.4.1.1141.2.61.2ScalarhcxCcSlotIdread-onlycurrentcontains the Common Controller slot id.
1.3.6.1.4.1.1141.2.61.3ScalarhcxCcHardwareVersionread-onlycurrentcontains the hardware version of the CC card.
1.3.6.1.4.1.1141.2.61.4ScalarhcxCcBootVersionread-onlycurrentcontains the version of the CC card boot ROM.
1.3.6.1.4.1.1141.2.61.6ScalarhcxSoftwareRevisionread-onlycurrentThe Common Controller Software Revision is a display string value which contains the software revision of the currently loaded COM21 Common Controller software…
1.3.6.1.4.1.1141.2.61.7ScalarhcxControlPrimServStateread-onlycurrentcontains primary service state of the Common Controller. This attribute indicates the overall service state of the Controller. OOS indicates that complete serv…
1.3.6.1.4.1.1141.2.61.8ScalarhcxControlSecServStateread-onlycurrentcontains a string defining the secondary service states of the Common Controller. The states supported by the com21HcxControlGroup are: FAN - indicates Fan Fai…
1.3.6.1.4.1.1141.2.61.9ScalarhcxCcDiagTestActionread-writecurrentThis attribute is used to invoke the internal Common Controller diagnostic test. In order to activate this test, the card must be placed in the test state.
1.3.6.1.4.1.1141.2.61.10ScalarhcxCcDiagTestResultread-onlycurrentThis attribute contains the result of the last CC card diagnostic test.
1.3.6.1.4.1.1141.2.61.11ScalarhcxCcTestStatusLedread-onlycurrentThe CC Test Status LED is a read-only attribute which describes the condition of the CC Test Status light emitting diode located on the CC. This indicates that…
1.3.6.1.4.1.1141.2.61.12ScalarhcxCcFaultStatusLedread-onlycurrentThe Ethernet Fault Status LED is a read-only attribute which describes the condition of the ComController Ethernet Fault Status light emitting diode located on…
1.3.6.1.4.1.1141.2.61.13ScalarhcxCcEtherLinkStatusLedread-onlycurrentThe Ethernet Link Status LED is a read-only attribute which describes the condition of the CC Ethernet Link Status light emitting diode located on the CC board…
1.3.6.1.4.1.1141.2.61.14ScalarhcxCcFlashBackupPeriodread-writecurrentThe period (in seconds) at which the CC shall automatically backup any configuration data to flash. This must be a multiple of 5 seconds upto 15 minutes. Defau…
1.3.6.1.4.1.1141.2.61.15ScalarhcxCcFlashBackupActionread-writecurrentThis attribute is used to invoke the Common Controller to save all configuration data to flash.
1.3.6.1.4.1.1141.2.61.16ScalarhcxCcFlashBackupResultread-onlycurrentThis attribute contains the result of the last CC user directed flash backup.
1.3.6.1.4.1.1141.2.61.17ScalarhcxSwitchSoftwareRevisionread-onlycurrentsoftware revision of the image loaded on the embedded ATM switch. In the case of the compact ComController this attribute refers to the boot software version.
1.3.6.1.4.1.1141.2.61.18ScalarhcxSwitchHardwareRevisionread-onlycurrenthardware revision of the embedded ATM switch. This attribute is only applicable for the compact ComController.
1.3.6.1.4.1.1141.2.61.19ScalarhcxSwitchSerialNumberread-onlycurrentserial number of the embedded ATM switch. This attribute is only applicable for the compact ComController.
1.3.6.1.4.1.1141.2.61.20ScalarhcxNtpv3Controlread-writecurrentthis attribute controls the NTPv3 feature. This features should NOT be enabled if NMAPS is in use. The timer servers are specified via com21HcxCcNtpGroup. Defa…
1.3.6.1.4.1.1141.2.61.21ScalarhcxDiskFaultStateread-onlycurrentthis attribute describes the fault state of the PCMCIA disk.
1.3.6.1.4.1.1141.2.61.22ScalarhcxDiskIdentifierread-onlycurrentthis attribute indentifies the type of PCMCIA device.
1.3.6.1.4.1.1141.2.61.23ScalarhcxMibVersionread-onlycurrentthis attribute specifies the MIB version used by CC.
1.3.6.1.4.1.1141.2.62Nodecom21HcxCcNtpGroup
1.3.6.1.4.1.1141.2.62.1Tablecom21HcxCcNtpTablenot-accessiblecurrent.
1.3.6.1.4.1.1141.2.62.1.1Rowcom21HcxCcNtpEntrynot-accessiblecurrent.
1.3.6.1.4.1.1141.2.62.1.1.1ColumnhcxCcNtpServerIndexread-onlycurrentthis attribute defines both the index of the address entry. The CC shall attempt to access each in order starting with index 1.
1.3.6.1.4.1.1141.2.62.1.1.2ColumnhcxCcNtpServerAddressread-writecurrentthis attribute defines both the IP address of a time server.
1.3.6.1.4.1.1141.2.62.1.1.3ColumnhcxCcNtpServerAddrStatusread-createcurrentUsed to delete or create an entry.
1.3.6.1.4.1.1141.4.10NotificationhcxControlPrimServStateChangecurrentgenerated whenever hcxControlPrimaryServiceState changes value. This an event with no clear condition. Only severity is WARNING.
1.3.6.1.4.1.1141.4.11NotificationhcxControlSecServStateChangecurrentgenerated whenever hcxControlSecondaryServiceState changes value. This an event with no clear condition. Only severity is WARNING.
1.3.6.1.4.1.1141.4.12NotificationhcxCcDiagTestCompletecurrentThis notification is generated whenever the CC card internal diagnostic tests are completed. Event only, no clear. Only severity allowed is WARNING.
1.3.6.1.4.1.1141.4.13NotificationhcxCcTestStatusLedChangecurrentgenerated whenever there is a change in test LED status. This an event with no clear condition. Only severity is WARNING.
1.3.6.1.4.1.1141.4.14NotificationhcxCcFaultStatusLedChangecurrentgenerated whenever there is a change in the Fault LED status. This an event with no clear condition. Only severity is WARNING.
1.3.6.1.4.1.1141.4.15NotificationhcxCcEtherLinkStatusLedChangecurrentgenerated whenever there is a change in link LED status. This an event with no clear condition. Only severity is WARNING.
1.3.6.1.4.1.1141.4.16NotificationhcxCcFlashBackupCompletecurrentThis notification is generated whenever the CC card completes a user directed flash backup of configuration. Only severity allowed is WARNING.
1.3.6.1.4.1.1141.4.17NotificationhcxDiskAccessFailurecurrentgenerated whenever there is a failure to access the PCMCIA disk. Default severity is MAJOR.
1.3.6.1.4.1.1141.4.18NotificationhcxDiskAccessFailClearcurrentgenerated whenever a previously reported disk failure is cleared. Severity is CLEARED.
Type Definitions
NameSyntaxStatusDescription
Com21RowStatusINTEGER { active(1), create(2), destroy(3), deactive(4) }
PrimServiceStateINTEGER { is(1), oos(2) }