COM21-HCXOC3-MIB
100 objects
This is the Com21 ComController Oc3 MIB module. COM21 Part# 005-0025-00
Imported Objects
| COM21-HCX-MIB | com21 com21Hcx com21Traps |
| COM21-HCXALM-MIB | hcxAlmSeverity hcxEventLogTime |
| SNMPv2-SMI | Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1141.2.90 | Identitycom21HcxOc3 | This is the Com21 ComController Oc3 MIB module. COM21 Part# 005-0025-00 | ||
| 1.3.6.1.4.1.1141.2.91 | Nodecom21HcxOc3UnitGroup | |||
| 1.3.6.1.4.1.1141.2.91.1 | Tablecom21HcxOc3UnitTable | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.91.1.1 | Rowcom21HcxOc3UnitEntry | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.91.1.1.1 | ColumnhcxOc3UnitShelfId | read-only | current | contains the associated shelf id. |
| 1.3.6.1.4.1.1141.2.91.1.1.2 | ColumnhcxOc3UnitSlotId | read-only | current | contains associated slot id. |
| 1.3.6.1.4.1.1141.2.91.1.1.3 | ColumnhcxOc3HardwareVersion | read-only | current | contains the hardware version of the Oc3 card. Will contain empty string if card has not been inserted in the slot. |
| 1.3.6.1.4.1.1141.2.91.1.1.4 | ColumnhcxOc3BootVersion | read-only | current | contains the version of the Oc3 card boot ROM. Will contain empty string if card has not been inserted in the slot. |
| 1.3.6.1.4.1.1141.2.91.1.1.5 | ColumnhcxOc3UnitPrimServState | read-only | current | contains primary service state of the Oc3 Unit. |
| 1.3.6.1.4.1.1141.2.91.1.1.6 | ColumnhcxOc3UnitSecServState | read-only | current | contains a string defining the secondary service states of the Oc3 Unit. The substrings supported by the Oc3 Unit shall be: UNEQ - unequipped. |
| 1.3.6.1.4.1.1141.2.91.1.1.7 | ColumnhcxOc3RestartAction | read-write | current | The Oc3 Unit Restart Action is an active-value. The setting of this attribute to restart(2) causes the Oc3 card to reset and download a new image. |
| 1.3.6.1.4.1.1141.2.91.1.1.8 | ColumnhcxOc3TestStatusLed | read-only | current | The Oc3 Test Status LED is a read-only attribute which describes the condition of the Oc3 Test Status light emitting diode located on the Oc3 board. A value of… |
| 1.3.6.1.4.1.1141.2.91.1.1.9 | ColumnhcxOc3FaultStatusLed | read-only | current | The Oc3 Fault Status LED is a read-only attribute which describes the condition of the Oc3 Fault Status light emitting diode located on the Oc3 board. A value … |
| 1.3.6.1.4.1.1141.2.91.1.1.10 | ColumnhcxOc3SerialNumber | read-only | current | contains the serial number of the Oc3 card. Will contain empty string if card has not been inserted in the slot. |
| 1.3.6.1.4.1.1141.2.91.1.1.11 | ColumnhcxOc3SyncClkConfigure | read-write | current | This attribute allows to configure the Oc3 card as the primary or secondary source for network clock. This attribute is valid only if networkClk is selected in… |
| 1.3.6.1.4.1.1141.2.92 | Nodecom21HcxOc3PortGroup | |||
| 1.3.6.1.4.1.1141.2.92.1 | Tablecom21HcxOc3PortTable | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.92.1.1 | Rowcom21HcxOc3PortEntry | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.92.1.1.1 | ColumnhcxOc3PortShelfId | read-only | current | contains shelf in which this Oc3 port is located. |
| 1.3.6.1.4.1.1141.2.92.1.1.2 | ColumnhcxOc3PortSlotId | read-only | current | contains slot in which this Oc3 port is located. |
| 1.3.6.1.4.1.1141.2.92.1.1.3 | ColumnhcxOc3PortId | read-only | current | contains port Id Oc3 port. |
| 1.3.6.1.4.1.1141.2.92.1.1.4 | ColumnhcxOc3PortPrimServState | read-only | current | contains primary service state of the Oc3 Unit. This state shall be effected by the hcxOc3PortState attribute. |
| 1.3.6.1.4.1.1141.2.92.1.1.5 | ColumnhcxOc3PortSecServState | read-only | current | contains a string defining the secondary service states of the Oc3 Unit. The substrings supported by the Oc3 Unit shall be: MT - offline, set by hcxOc3, FAULT … |
| 1.3.6.1.4.1.1141.2.92.1.1.6 | ColumnhcxOc3MaxBandwidth | read-write | current | This attribute defines the maximum output payload bandwidth associated with the Oc3 port. Defined in thousands of bps. From 0 to 22222. This value shall be che… |
| 1.3.6.1.4.1.1141.2.92.1.1.7 | ColumnhcxOc3AggrDnStrmCbrRate | read-only | current | This attribute specifies the aggregate of all ComPort downstream CBR rates configured on the Oc3 port This includes both acquired and unacquired ComPorts. Defi… |
| 1.3.6.1.4.1.1141.2.92.1.1.8 | ColumnhcxOc3AggrDnStrmPcrRate | read-only | current | This attribute specifies the aggregate of all ComPort downstream PCR rates configured on the Oc3 port This includes both acquired and unacquired ComPorts. Defi… |
| 1.3.6.1.4.1.1141.2.92.1.1.9 | ColumnhcxOc3AggrUpStrmCbrRate | read-only | current | This attribute specifies the aggregate of all ComPort upstream CBR rates configured on the Oc3 port This includes both acquired and unacquired ComPorts. Define… |
| 1.3.6.1.4.1.1141.2.92.1.1.10 | ColumnhcxOc3AggrUpStrmMinRate | read-only | current | This attribute specifies the aggregate of all ComPort upstream minimum PCR rates on the Oc3 port This includes both acquired and unacquired ComPorts. Defined i… |
| 1.3.6.1.4.1.1141.2.92.1.1.11 | ColumnhcxOc3AggrUpStrmMaxRate | read-only | current | This attribute specifies the aggregate of all ComPort upstream maximum cell rates on the Oc3 port This includes both acquired and unacquired ComPorts. Defined … |
| 1.3.6.1.4.1.1141.2.92.1.1.12 | ColumnhcxOc3AgeTime | read-write | current | This attribute defines, in seconds, the aging time for non-accessed entries in the Bridge mapping table. The default shall be 300secs. If this set to 0, then a… |
| 1.3.6.1.4.1.1141.2.92.1.1.13 | ColumnhcxOc3PortConfigState | read-write | current | The Oc3 Port State is an active-value. The Oc3 port will default to offline, in which case no traffic shall be passed. Default offline. |
| 1.3.6.1.4.1.1141.2.92.1.1.14 | ColumnhcxOc3PortRestartAction | read-write | current | The Oc3 Port Restart Action is an active-value. The setting of this attribute to restart(2) causes the Oc3 port to reset and download a new image. |
| 1.3.6.1.4.1.1141.2.92.1.1.15 | ColumnhcxOc3PortDiagTestAction | read-write | current | This attribute is used to invoke the internal Oc3 card diagnostic test. In order to activate this test, the card must be placed in the test state. |
| 1.3.6.1.4.1.1141.2.92.1.1.16 | ColumnhcxOc3PortDiagTestResult | read-only | current | This attribute contains the result of the last Oc3 port diagnostic test. |
| 1.3.6.1.4.1.1141.2.92.1.1.17 | ColumnhcxOc3PortLOSLed | read-only | current | The OC3 Loss Of Signal LED indicates whether a Loss of Signal is present on the WAN side of the OC3 port. |
| 1.3.6.1.4.1.1141.2.92.1.1.18 | ColumnhcxOc3AggrActDnStrmCbrRate | read-only | current | This attribute specifies the aggregate of all ComPort downstream CBR rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined in Kbps. |
| 1.3.6.1.4.1.1141.2.92.1.1.19 | ColumnhcxOc3AggrActDnStrmPcrRate | read-only | current | This attribute specifies the aggregate of all ComPort downstream PCR rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined in Kbps. |
| 1.3.6.1.4.1.1141.2.92.1.1.20 | ColumnhcxOc3AggrActUpStrmCbrRate | read-only | current | This attribute specifies the aggregate of all ComPort upstream CBR rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined in bits p… |
| 1.3.6.1.4.1.1141.2.92.1.1.21 | ColumnhcxOc3AggrActUpStrmMinRate | read-only | current | This attribute specifies the aggregate of all ComPort upstream minimum PCR rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined i… |
| 1.3.6.1.4.1.1141.2.92.1.1.22 | ColumnhcxOc3AggrActUpStrmMaxRate | read-only | current | This attribute specifies the aggregate of all ComPort upstream maximum cell rates active on the Oc3 port (VLAN). This includes only acquired ComPorts. Defined … |
| 1.3.6.1.4.1.1141.2.92.1.1.23 | ColumnhcxOc3PortIpAddr | read-write | current | IP Address associated with this ethernet port. This is a future item for telephone return support. |
| 1.3.6.1.4.1.1141.2.92.1.1.24 | ColumnhcxOc3PortIpMask | read-write | current | IP mask associated with port. Default is ff.ff.ff.ff. This is a future item for telephone return support. |
| 1.3.6.1.4.1.1141.2.92.1.1.25 | ColumnhcxOc3PortMacAddr | read-only | current | MAC address associated with port. |
| 1.3.6.1.4.1.1141.2.92.1.1.26 | ColumnhcxOc3Port1483EncapEnbl | read-write | current | This attribute is used to Enable/Disable 1483 Encapsulation on the Oc3Port. If enabled, then all Ethernet packets received by the Oc3Port should be 1483 Encaps… |
| 1.3.6.1.4.1.1141.2.92.1.1.27 | ColumnhcxOc3PortSectionLOS | read-only | current | This attribute indicates whether Section Loss of Signal is present at the OC3 Port. Default: off. |
| 1.3.6.1.4.1.1141.2.92.1.1.28 | ColumnhcxOc3PortSectionLOF | read-only | current | This attribute indicates whether Section Loss of Frame is present at the OC3 Port. Default: off. |
| 1.3.6.1.4.1.1141.2.92.1.1.29 | ColumnhcxOc3PortLineAIS | read-only | current | This attribute indicates whether Line Alarm Indication Signal is detected by the OC3 Port Default: off. |
| 1.3.6.1.4.1.1141.2.92.1.1.30 | ColumnhcxOc3PortLineRDI | read-only | current | This attribute indicates whether Line Remote Defect Indication is detected by the OC3 Port Default: off. |
| 1.3.6.1.4.1.1141.2.92.1.1.31 | ColumnhcxOc3PortPathRDI | read-only | current | This attribute indicates whether Path Remote Defect Indication is detected by the OC3 Port Default: off. |
| 1.3.6.1.4.1.1141.2.92.1.1.32 | ColumnhcxOc3PortAggrVoiceRate | read-only | current | This attribute specifies the aggregate Rate of all Voice Channels configured on this Port. A voice channel is considered configured on this Port if: a ComPort … |
| 1.3.6.1.4.1.1141.2.92.1.1.33 | ColumnhcxOc3PortAggrActVoiceRate | read-only | current | This attribute specifies the aggregate Rate of all Voice Channels Active on this Port. A voice channel is considered Active on this Port if: a ComPort is confi… |
| 1.3.6.1.4.1.1141.2.92.1.1.34 | ColumnhcxOc3PortLOFLed | read-only | current | The OC3 Loss Of Frame LED indicates whether a Loss of Frame is present on the WAN side of the OC3 port. |
| 1.3.6.1.4.1.1141.2.93 | Nodecom21HcxOc3VccGroup | |||
| 1.3.6.1.4.1.1141.2.93.1 | Tablecom21HcxOc3VccTable | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.93.1.1 | Rowcom21HcxOc3VccEntry | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.93.1.1.1 | ColumnhcxOc3VccShelfId | read-only | current | Specifies the Shelf where this Entry exists. |
| 1.3.6.1.4.1.1141.2.93.1.1.2 | ColumnhcxOc3VccSlotId | read-only | current | Specifies the Slot where this Entry exists. |
| 1.3.6.1.4.1.1141.2.93.1.1.3 | ColumnhcxOc3VccPortId | read-only | current | Specifies the Port where this Entry exists. |
| 1.3.6.1.4.1.1141.2.93.1.1.4 | ColumnhcxOc3VccVpi | read-only | current | Specifies the Vpi where this Entry exists. |
| 1.3.6.1.4.1.1141.2.93.1.1.5 | ColumnhcxOc3VccVci | read-only | current | Specifies the Vci where this Entry exists. |
| 1.3.6.1.4.1.1141.2.93.1.1.6 | ColumnhcxOc3VccType | read-only | current | Specifies whether this VCC is used to transport data or voice. |
| 1.3.6.1.4.1.1141.2.94 | Nodecom21HcxOc3StatsGroup | |||
| 1.3.6.1.4.1.1141.2.94.1 | Tablecom21HcxOc3StatsTable | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.94.1.1 | Rowcom21HcxOc3StatsEntry | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.94.1.1.1 | ColumnhcxOc3StatsShelfId | read-only | current | Specifies the Shelf where this Entry exists. |
| 1.3.6.1.4.1.1141.2.94.1.1.2 | ColumnhcxOc3StatsSlotId | read-only | current | Specifies the Slot where this Entry exists. |
| 1.3.6.1.4.1.1141.2.94.1.1.3 | ColumnhcxOc3StatsPortId | read-only | current | Specifies the Port where this Entry exists. |
| 1.3.6.1.4.1.1141.2.94.1.1.4 | ColumnhcxOc3StatsCurrSectionBIPErr | read-only | current | This attributes displays the number of Section Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period. |
| 1.3.6.1.4.1.1141.2.94.1.1.5 | ColumnhcxOc3StatsCurrLineBIPErr | read-only | current | This attributes displays the number of Line Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period. |
| 1.3.6.1.4.1.1141.2.94.1.1.6 | ColumnhcxOc3StatsCurrPathBIPErr | read-only | current | This attributes displays the number of Path Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period. |
| 1.3.6.1.4.1.1141.2.94.1.1.7 | ColumnhcxOc3StatsCurrLineFEndBlockErr | read-only | current | This attributes displays the number of Far End Line Block Errors reported by the OC3 Port in the current 15-minute period. |
| 1.3.6.1.4.1.1141.2.94.1.1.8 | ColumnhcxOc3StatsCurrPathFEndBlockErr | read-only | current | This attributes displays the number of Far End Path Block Errors reported by the OC3 Port in the current 15-minute period. |
| 1.3.6.1.4.1.1141.2.94.1.1.9 | ColumnhcxOc3StatsPrevSectionBIPErr | read-only | current | This attributes displays the number of Section Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period. |
| 1.3.6.1.4.1.1141.2.94.1.1.10 | ColumnhcxOc3StatsPrevLineBIPErr | read-only | current | This attributes displays the number of Line Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period. |
| 1.3.6.1.4.1.1141.2.94.1.1.11 | ColumnhcxOc3StatsPrevPathBIPErr | read-only | current | This attributes displays the number of Path Byte Interleaved Parity Errors reported by the OC3 Port in the current 15-minute period. |
| 1.3.6.1.4.1.1141.2.94.1.1.12 | ColumnhcxOc3StatsPrevLineFEndBlockErr | read-only | current | This attributes displays the number of Far End Line Block Errors reported by the OC3 Port in the current 15-minute period. |
| 1.3.6.1.4.1.1141.2.94.1.1.13 | ColumnhcxOc3StatsPrevPathFEndBlockErr | read-only | current | This attributes displays the number of Far End Path Block Errors reported by the OC3 Port in the current 15-minute period. |
| 1.3.6.1.4.1.1141.2.94.1.1.14 | ColumnhcxOc3StatsClear | read-write | current | This attribute is used to clear the all OC3 Stats statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to… |
| 1.3.6.1.4.1.1141.4.150 | NotificationhcxOc3UnitPrimStateChange | current | This trap is generated whenever a change in the the hcxOc3UnitPrimServState occurs. This an event with no clear condition. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.151 | NotificationhcxOc3UnitSecStateChange | current | This trap is generated whenever a change in the the hcxOc3UnitSecServState occurs. This an event with no clear condition. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.152 | NotificationhcxOc3TestStatusLedChange | current | generated whenever there is a change in test LED status. This an event with no clear condition. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.153 | NotificationhcxOc3FaultStatusLedChange | current | generated whenever there is a change in the Fault LED status. This an event with no clear condition. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.154 | NotificationhcxOc3PortPrimStateChange | current | This trap is generated whenever a change in the the hcxOc3PortPrimServState occurs. This an event with no clear condition. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.155 | NotificationhcxOc3PortSecStateChange | current | This trap is generated whenever a change in the the hcxOc3PortSecServState occurs. This an event with no clear condition. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.156 | NotificationhcxOc3PortDiagTestComplete | current | This notification is generated whenever the Oc3 port internal diagnostic tests are completed. Event only, no clear. Only severity allowed is WARNING. | |
| 1.3.6.1.4.1.1141.4.157 | NotificationhcxOc3OperationFailure | current | This notification is generated by the CC whenever an Oc3 port fails to respond correctly to a request. This failure could indicate either a resource problem or… | |
| 1.3.6.1.4.1.1141.4.158 | NotificationhcxOc3PortLOSLedChange | current | generated whenever there is a change in the LOS LED status. This an event with no clear condition. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.159 | NotificationhcxOc3PortSectionLOSDetected | current | generated whenever Loss of Signal is detected at the OC3 Port. Alarm Severity: MAJOR | |
| 1.3.6.1.4.1.1141.4.160 | NotificationhcxOc3PortSectionLOSClear | current | generated whenever Loss of Signal is Cleared at the OC3 Port. Alarm Severity: CLEAR | |
| 1.3.6.1.4.1.1141.4.161 | NotificationhcxOc3PortSectionLOFDetected | current | generated whenever Loss of Frame is detected at the OC3 Port. Alarm Severity: MAJOR | |
| 1.3.6.1.4.1.1141.4.162 | NotificationhcxOc3PortSectionLOFClear | current | generated whenever Loss of Frame is cleared at the OC3 Port. Alarm Severity: CLEAR | |
| 1.3.6.1.4.1.1141.4.163 | NotificationhcxOc3PortLineAISDetected | current | generated whenever AIS is detected at the OC3 Port. Alarm Severity: MAJOR | |
| 1.3.6.1.4.1.1141.4.164 | NotificationhcxOc3PortLineAISClear | current | generated whenever AIS is cleared at the OC3 Port. Alarm Severity: CLEAR | |
| 1.3.6.1.4.1.1141.4.165 | NotificationhcxOc3PortLineRDIDetected | current | generated whenever Line Remote Defect Indication is detected at the OC3 Port. Alarm Severity: MAJOR | |
| 1.3.6.1.4.1.1141.4.166 | NotificationhcxOc3PortLineRDIClear | current | generated whenever Line Remote Defect Indication is cleared at the OC3 Port. Alarm Severity: CLEAR | |
| 1.3.6.1.4.1.1141.4.167 | NotificationhcxOc3PortPathRDIDetected | current | generated whenever Path Remote Defect Indication is detected at the OC3 Port. Alarm Severity: MAJOR | |
| 1.3.6.1.4.1.1141.4.168 | NotificationhcxOc3PortPathRDIClear | current | generated whenever Path Remote Defect Indication is cleared at the OC3 Port. Alarm Severity: CLEAR | |
| 1.3.6.1.4.1.1141.4.169 | NotificationhcxOc3PortLOFLedChange | current | generated whenever there is a change in the LOF LED status. This an event with no clear condition. Only severity is WARNING. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Com21RowStatus | INTEGER { active(1), create(2), destroy(3), deactive(4) } | ||
| PrimServiceState | INTEGER { is(1), oos(2) } |