COM21-HCXSTU-MIB
128 objects
This is the Com21 ComPort Control MIB module. All data defined in this MIB is held upon the ComController. COM21 Part# 005-0025-00
Imported Objects
| COM21-HCX-MIB | com21 com21Hcx com21Traps |
| COM21-HCXALM-MIB | hcxAlmSeverity hcxEventLogTime |
| RFC1155-SMI | Gauge |
| SNMPv2-SMI | Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1141.2.50 | Identitycom21HcxStu | This is the Com21 ComPort Control MIB module. All data defined in this MIB is held upon the ComController. COM21 Part# 005-0025-00 | ||
| 1.3.6.1.4.1.1141.2.51 | Nodecom21HcxStuStatusGroup | |||
| 1.3.6.1.4.1.1141.2.51.1 | Tablecom21HcxStuStatusTable | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.51.1.1 | Rowcom21HcxStuStatusEntry | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.51.1.1.1 | ColumnhcxStuStatusMacAddr | read-only | current | Contains IEEE 802 medium access control address of the ComPort device. |
| 1.3.6.1.4.1.1141.2.51.1.1.2 | ColumnhcxStuConfigured | read-create | current | This attribute defines the configured state of the ComPort. This value will be set to true when the NMAPS creates a new entry. If this value is false, the hcxS… |
| 1.3.6.1.4.1.1141.2.51.1.1.3 | ColumnhcxStuAcquired | read-only | current | This attribute defines the acquired state of the ComPort. Note that is state is set once an ComPort can be managed. We could have a condition were an ComPort i… |
| 1.3.6.1.4.1.1141.2.51.1.1.4 | ColumnhcxStuAcqFailInfo | read-only | current | This attribute provides secondary information related to an ComPort acquisition. If there is a failure in the system that prevents a user from receiving full s… |
| 1.3.6.1.4.1.1141.2.51.1.1.5 | ColumnhcxStuAuthorized | read-write | current | This attribute defines the verified state of the ComPort. This state can only be set by the NMAPS. If this attribute is false, then all cells rates shall be se… |
| 1.3.6.1.4.1.1141.2.51.1.1.6 | ColumnhcxStuLedFlashTest | read-write | current | Used to invoke an ComPort LED test. Setting the the attribute to start will invoke test. Setting to stop will terminate the test. When reading this attribute, … |
| 1.3.6.1.4.1.1141.2.51.1.1.7 | ColumnhcxStuUpstreamTest | read-write | current | Used to invoke an ComPort Upstream RF test. Setting the attribute to start will invoke test. Setting to stop will terminate the test. When reading this attribu… |
| 1.3.6.1.4.1.1141.2.51.1.1.8 | ColumnhcxStuVlanId | read-write | current | This attribute defines the virtual LAN id associated with the ComPort. No default, must be set. Note, in the case of an acquired but unconfigured ComPort, a va… |
| 1.3.6.1.4.1.1141.2.51.1.1.9 | ColumnhcxStuRxShelfId | read-only | current | This attribute specifies the shelf id associated with the RX the ComPort is currently assigned to. If ComPort is unacquired then the value shall be 0. |
| 1.3.6.1.4.1.1141.2.51.1.1.10 | ColumnhcxStuRxSlotId | read-only | current | This attribute specifies the slot id of the RX card to which the ComPort is currently assigned. If ComPort is unacquired then the value shall be 0. |
| 1.3.6.1.4.1.1141.2.51.1.1.11 | ColumnhcxStuRxPortId | read-only | current | This attribute specifies the RX port to which the ComPort is assigned. Presently only one port supported. If the ComPort is unacquired then the attribute shall… |
| 1.3.6.1.4.1.1141.2.51.1.1.12 | ColumnhcxStuServiceType | read-write | current | This attribute defines the Service Type associated with the ComPort. This equals the associated hcxServiceTypeId attribute. The default shall be 0, indicating … |
| 1.3.6.1.4.1.1141.2.51.1.1.14 | ColumnhcxStuConfSwImage | read-write | current | Contains the configured software image to be downloaded to the ComPort. The Common Controller download process shall check this value when a download is reques… |
| 1.3.6.1.4.1.1141.2.51.1.1.15 | ColumnhcxStuPingTestAction | read-write | current | Used to invoke a ping of the ComPort. Sends an OAM Ping message. When the user reads this attribute a nil response shall be given if no test is active and exec… |
| 1.3.6.1.4.1.1141.2.51.1.1.16 | ColumnhcxStuPingTestResult | read-only | current | contains result of last ping test. invalid is returned if ping test cannot be run. Examples being an unacquired ComPort or a ComPort. |
| 1.3.6.1.4.1.1141.2.51.1.1.17 | ColumnhcxStuEthTestAction | read-write | current | This attribute is used to invoke the ComPort Ethernet test. If lpBkTest is selected, the ComController will place the ComPort in the loopback state, transmit a… |
| 1.3.6.1.4.1.1141.2.51.1.1.18 | ColumnhcxStuEthTestResult | read-only | current | This attribute contains the result of the last ComPort test. |
| 1.3.6.1.4.1.1141.2.51.1.1.19 | ColumnhcxStuRetPathSelect | read-write | current | This attribute specifies the return path mode of the ComPort. Default is two way cable. |
| 1.3.6.1.4.1.1141.2.51.1.1.20 | ColumnhcxStuEth8022Filter | read-write | current | This attribute is used to control the filtering of 802.2 Ethernet packets for a specific ComPORT. When this is enabled (true), all Ethernet packets of this typ… |
| 1.3.6.1.4.1.1141.2.51.1.1.21 | ColumnhcxStuDnstrmFwdCntrl | read-write | current | This attribute is used to control the forwarding of packets downstream which where received in the upstream from a specific ComPORT. If set to true, then the d… |
| 1.3.6.1.4.1.1141.2.51.1.1.22 | ColumnhcxStuStatsCollect | read-write | current | This attribute is used to control whether statistics are collected periodically from the ComPort. Default is enable for two-way ComPorts and disable for ComPor… |
| 1.3.6.1.4.1.1141.2.51.1.1.23 | ColumnhcxStuPowerRangeState | read-only | current | This attribute describes the power ranging state of the ComPort. An unacquired ComPort or one operating within the power specifications shall have a state of n… |
| 1.3.6.1.4.1.1141.2.51.1.1.24 | ColumnhcxStuRpmIPortId | read-only | current | This attribute specifies the RPM I-Port to which the ComPort is associated. 0 will be reported if the ComPort has never been acquired or is not connected via a… |
| 1.3.6.1.4.1.1141.2.51.1.1.25 | ColumnhcxStuEthLpbkTestUpRate | read-only | current | This attribute contains the rate recorded for the last loopback test. Will be 0 if test failed. |
| 1.3.6.1.4.1.1141.2.51.1.1.26 | ColumnhcxStuEthLpbkTestLatency | read-only | current | This attribute contains the round trip packet latency recorded by the last loopback test. Again 0 if test failed. |
| 1.3.6.1.4.1.1141.2.51.1.1.27 | ColumnhcxStuModelName | read-only | current | This attribute defines the ComPort Model Type read from the ComPort. Prior to the acquisition of the ComPort for the first time, this attribute will be uniniti… |
| 1.3.6.1.4.1.1141.2.51.1.1.28 | ColumnhcxStuEthTestDnRate | read-only | current | This attribute contains the downstream rate (in bps) recorded by the last hcxStuEthTestAction test. 0 if test failed. |
| 1.3.6.1.4.1.1141.2.51.1.1.30 | ColumnhcxStuEthLpbkTestDuration | read-write | current | This attribute specifies the duration of the loopback test in seconds. Default is 5 seconds. |
| 1.3.6.1.4.1.1141.2.52 | Nodecom21HcxStuSrcIpAddrGroup | |||
| 1.3.6.1.4.1.1141.2.52.1 | Tablecom21HcxStuSrcIpAddrTable | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.52.1.1 | Rowcom21HcxStuSrcIpAddrEntry | not-accessible | current | Holds the IP addresses and associated masks for ARP filtering. There are 8 addresses per ComPort. |
| 1.3.6.1.4.1.1141.2.52.1.1.1 | ColumnhcxStuSrcIpAddrMacAddr | read-only | current | Contains IEEE 802 medium access control address of the ComPort device. |
| 1.3.6.1.4.1.1141.2.52.1.1.2 | ColumnhcxStuSrcIpAddrIPAddr | read-write | current | allowable IP Address for ComPort. Default 0.0.0.0. |
| 1.3.6.1.4.1.1141.2.52.1.1.3 | ColumnhcxStuSrcIpAddrIPMask | read-write | current | IP mask for ComPort. Default is ff.ff.ff.ff. |
| 1.3.6.1.4.1.1141.2.52.1.1.4 | ColumnhcxStuSrcIpAddrUserMacAddr | read-write | current | allowable MAC Address for ComPort. Default is 0:0:0:0:0:0 |
| 1.3.6.1.4.1.1141.2.52.1.1.5 | ColumnhcxStuSrcIpAddrIPStatus | read-create | current | Used to delete or create an entry. |
| 1.3.6.1.4.1.1141.2.52.1.1.6 | ColumnhcxStuSrcIpAddrEtherIPAddr | read-write | current | IP address of Ethernet Interface on users PC. Applicable only to telephone return. |
| 1.3.6.1.4.1.1141.2.52.1.1.7 | ColumnhcxStuSrcIpAddrEntryId | read-only | current | Contains table entry id. |
| 1.3.6.1.4.1.1141.2.52.1.1.8 | ColumnhcxStuSrcIpAddrType | read-only | current | This attribute indicates if the specified IP address/mask combination is Statically configured by NMAPS or dynamically learnt via DHCP |
| 1.3.6.1.4.1.1141.2.52.1.1.9 | ColumnhcxStuSrcIpAddrLeaseTimer | read-only | current | This attribute indicates the lease timer value associated with a dynamically learnt IP address |
| 1.3.6.1.4.1.1141.2.53 | Nodecom21HcxStuIpFiltGroup | |||
| 1.3.6.1.4.1.1141.2.53.1 | Tablecom21HcxStuIpFiltTable | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.53.1.1 | Rowcom21HcxStuIpFiltEntry | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.53.1.1.1 | ColumnhcxStuIpFiltMacAddr | read-only | current | Contains IEEE 802 medium access control address of the ComPort device. |
| 1.3.6.1.4.1.1141.2.53.1.1.2 | ColumnhcxStuIpArpFiltEnable | read-write | current | Specifies whether ARP authentication filtering should be enabled for this ComPort. This filter is applicable to 10BT, 100BT, and OC3 cards. It filters traffic … |
| 1.3.6.1.4.1.1141.2.53.1.1.3 | ColumnhcxStuIpArpFiltInvalidAddr | read-only | current | Contains the last invalid IP Address used by the ComPort. This value is cleared on the quarter hour. |
| 1.3.6.1.4.1.1141.2.53.1.1.4 | ColumnhcxStuIpArpFiltBadServAddr | read-only | current | Contains the last ComController Server IP Address used by the ComPort. This value is cleared on the quarter hour. |
| 1.3.6.1.4.1.1141.2.53.1.1.5 | ColumnhcxStuIpSrcFiltEnable | read-write | current | Specifies whether IP source address filtering should be enabled for this ComPort. This filter is applicable to 100BT, and OC3 cards. It is not applicable to 10… |
| 1.3.6.1.4.1.1141.2.53.1.1.6 | ColumnhcxStuIpDstFiltEnable | read-write | current | Specifies whether IP destination address filtering should be enabled for this ComPort. This filter is applicable to 100BT, and OC3 cards. It is not applicable … |
| 1.3.6.1.4.1.1141.2.53.1.1.7 | ColumnhcxStuIpBootpReqFiltEnbl | read-write | deprecated | Allows enabling or disabling BOOTP Request Filter for this STU. Default: FALSE |
| 1.3.6.1.4.1.1141.2.53.1.1.8 | ColumnhcxStuIpBootpReplyFiltEnbl | read-write | current | Specifies whether BOOTP replies, or DHCPOFFER, or DHCPACK packets should be filtered for this ComPort. This filter is applicable to 100BT, and OC3 cards. It it… |
| 1.3.6.1.4.1.1141.2.53.1.1.9 | ColumnhcxStuIpDhcpSnoopFiltEnbl | read-write | current | Specifies whether DHCP snooping should be enabled for this ComPort. This filter is applicable to 100BT, and OC3 cards. It is not applicable to 10BT card. It sn… |
| 1.3.6.1.4.1.1141.2.53.1.1.10 | ColumnhcxStuL2SnapFiltEnbl | read-write | current | Specifies whether SNAP-encoded IEEE 802.3 packets should be filtered for this ComPort. This filter is applicable to 100BT, and OC3 cards. It is not applicable … |
| 1.3.6.1.4.1.1141.2.53.1.1.11 | ColumnhcxStuL2NonSnapFiltEnbl | read-write | current | Specifies whether non-SNAP-encoded IEEE 802.3 packets should be filtered for this ComPort. This filter is applicable to 10BT, 100BT, and OC3 cards. It filters … |
| 1.3.6.1.4.1.1141.2.53.1.1.12 | ColumnhcxStuL2EnetFiltEnbl | read-write | deprecated | Specifies whether Ethernet packets should be filtered for this ComPort. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It… |
| 1.3.6.1.4.1.1141.2.53.1.1.13 | ColumnhcxStuL2ArpIpv4FiltEnbl | read-write | deprecated | Specifies whether ARP packets should be filtered for this ComPort. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filt… |
| 1.3.6.1.4.1.1141.2.53.1.1.14 | ColumnhcxStuL2Ipv4FiltEnbl | read-write | deprecated | Specifies whether IPv4 packets should be filtered for this ComPort. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It fil… |
| 1.3.6.1.4.1.1141.2.53.1.1.15 | ColumnhcxStuL2Ipv6FiltEnbl | read-write | deprecated | Specifies whether IPv6 packets should be filtered for this ComPort. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It fil… |
| 1.3.6.1.4.1.1141.2.53.1.1.16 | ColumnhcxStuL2IpxFiltEnbl | read-write | deprecated | Specifies whether IPX packets should be filtered for this ComPort. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. It filt… |
| 1.3.6.1.4.1.1141.2.53.1.1.17 | ColumnhcxStuL2AppletalkFiltEnbl | read-write | deprecated | Specifies whether AppleTalk packets should be filtered for this ComPort. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT card. I… |
| 1.3.6.1.4.1.1141.2.53.1.1.18 | ColumnhcxStuL2OthersFiltEnbl | read-write | deprecated | Specifies whether all layer 2 packets that are none of the above (ARP, IPv4, IPv6, IPX, AppleTalk) should be filtered for this ComPort. This filter is applicab… |
| 1.3.6.1.4.1.1141.2.53.1.1.19 | ColumnhcxStuIpNetbiosFiltEnbl | read-write | current | Specifies whether NetBIOS-over-IP packets should be filtered for this ComPort. This filter is applicable to 100BT and OC3 cards. It is not applicable to 10BT c… |
| 1.3.6.1.4.1.1141.2.55 | Nodecom21HcxStuIpFiltStatsGroup | |||
| 1.3.6.1.4.1.1141.2.55.1 | Tablecom21HcxStuIpFiltStatsTable | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.55.1.1 | Rowcom21HcxStuIpFiltStatsEntry | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.55.1.1.1 | ColumnhcxStuIpFiltStatsMacAddr | read-only | current | Contains IEEE 802 medium access control address of the ComPort device. |
| 1.3.6.1.4.1.1141.2.55.1.1.2 | ColumnhcxStuIpCurrArpFiltStat | read-only | current | Contains the number of ARP packets from this ComPort dropped due to authentication filtering in the current 15 minute collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.3 | ColumnhcxStuIpCurrSrcFiltStat | read-only | current | Contains the number of IP packets from this ComPort dropped due to source address filtering in the current 15 minute collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.4 | ColumnhcxStuIpCurrDstFiltStat | read-only | current | Contains the number of IP packets from this ComPort dropped due to destination address filtering in the current 15 minute collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.5 | ColumnhcxStuIpCurrBootpReqFiltStat | read-only | current | Contains the number of bootp Req packets from this ComPort dropped due to filtering in the current 15 minute collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.6 | ColumnhcxStuIpCurrBootpReplyFiltStat | read-only | current | Contains the number of bootp Reply packets from this ComPort dropped due to filtering in the current 15 minute collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.7 | ColumnhcxStuIpCurrDhcpSnoopFiltStat | read-only | current | Contains the number of DHCP Ack packets from this ComPort snooped due to filtering in the current 15 minute collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.8 | ColumnhcxStuIpPrevArpFiltStat | read-only | current | Contains the number of ARP packets from this ComPort dropped due to authentication filtering in the previous 15 minute collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.9 | ColumnhcxStuIpPrevSrcFiltStat | read-only | current | Contains the number of IP packets from this ComPort dropped due to source address filtering in the previous 15 minute collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.10 | ColumnhcxStuIpPrevDstFiltStat | read-only | current | Contains the number of IP packets from this ComPort dropped due to destination address filtering in the previous 15 minute collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.11 | ColumnhcxStuIpPrevBootpReqFiltStat | read-only | current | Contains the number of bootp Req packets from this ComPort dropped due to filtering in the previous 15 minute collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.12 | ColumnhcxStuIpPrevBootpReplyFiltStat | read-only | current | Contains the number of bootp Reply packets from this ComPort dropped due to filtering in the previous 15 minute collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.13 | ColumnhcxStuIpPrevDhcpSnoopFiltStat | read-only | current | Contains the number of DHCP Ack packets from this ComPort snooped due to filtering in the previous 15 minute collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.14 | ColumnhcxStuIpClearStats | read-write | current | This attribute is used to clear all IP Filter statistics counters in this group. This operation is only possible if the hcxStatsControl attribute is set to wra… |
| 1.3.6.1.4.1.1141.2.55.1.1.15 | ColumnhcxStuL2CurrSnapFiltStat | read-only | current | Contains the number of SNAP-encoded IEEE 802.3 packets filtered in the current 15 min collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.16 | ColumnhcxStuL2CurrNonSnapFiltStat | read-only | current | Contains the number of non-SNAP-encoded IEEE 802.3 packets filtered in the current 15 min collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.17 | ColumnhcxStuL2CurrEnetFiltStat | read-only | deprecated | Contains the number of Ethernet packets filtered in the current 15 min collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.18 | ColumnhcxStuL2CurrArpIpv4FiltStat | read-only | deprecated | Contains the number of ARP for IPv4 packets filtered in the current 15 min collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.19 | ColumnhcxStuL2CurrIpv4FiltStat | read-only | deprecated | Contains the number of IPv4 packets filtered in the current 15 min collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.20 | ColumnhcxStuL2CurrIpv6FiltStat | read-only | deprecated | Contains the number of IPv6 packets filtered in the current 15 min collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.21 | ColumnhcxStuL2CurrIpxFiltStat | read-only | deprecated | Contains the number of IPX packets filtered in the current 15 min collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.22 | ColumnhcxStuL2CurrAppletalkFiltStat | read-only | deprecated | Contains the number of Appletalk packets filtered in the current 15 min collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.23 | ColumnhcxStuL2CurrOthersFiltStat | read-only | deprecated | Contains the number of packets that are non of the above that are filtered in the current 15 min collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.24 | ColumnhcxStuIpCurrNetbiosFiltStat | read-only | current | Contains the number of Netbios packets filtered in the current 15 min collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.25 | ColumnhcxStuL2PrevSnapFiltStat | read-only | current | Contains the number of SNAP-encoded IEEE 802.3 packets filtered in the previous 15 min collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.26 | ColumnhcxStuL2PrevNonSnapFiltStat | read-only | current | Contains the number of non-SNAP-encoded IEEE 802.3 packets filtered in the previous 15 min collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.27 | ColumnhcxStuL2PrevEnetFiltStat | read-only | deprecated | Contains the number of Ethernet packets filtered in the previous 15 min collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.28 | ColumnhcxStuL2PrevArpIpv4FiltStat | read-only | deprecated | Contains the number of ARP for IPv4 packets filtered in the previous 15 min collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.29 | ColumnhcxStuL2PrevIpv4FiltStat | read-only | deprecated | Contains the number of IPv4 packets filtered in the previous 15 min collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.30 | ColumnhcxStuL2PrevIpv6FiltStat | read-only | deprecated | Contains the number of IPv6 packets filtered in the previous 15 min collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.31 | ColumnhcxStuL2PrevIpxFiltStat | read-only | deprecated | Contains the number of IPX packets filtered in the previous 15 min collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.32 | ColumnhcxStuL2PrevAppletalkFiltStat | read-only | deprecated | Contains the number of Appletalk packets filtered in the previous 15 min collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.33 | ColumnhcxStuL2PrevOthersFiltStat | read-only | deprecated | Contains the number of packets that are non of the above that are filtered in the previous 15 min collection period. |
| 1.3.6.1.4.1.1141.2.55.1.1.34 | ColumnhcxStuIpPrevNetbiosFiltStat | read-only | current | Contains the number of Netbios packets filtered in the previous 15 min collection period. |
| 1.3.6.1.4.1.1141.2.57 | Nodecom21HcxStuDstIpAddrGroup | |||
| 1.3.6.1.4.1.1141.2.57.1 | Tablecom21HcxStuDstIpAddrTable | not-accessible | current | . |
| 1.3.6.1.4.1.1141.2.57.1.1 | Rowcom21HcxStuDstIpAddrEntry | not-accessible | current | Holds the IP addresses and associated masks for ARP filtering. There are 8 addresses per ComPort. |
| 1.3.6.1.4.1.1141.2.57.1.1.1 | ColumnhcxStuDstIpAddrMacAddr | read-only | current | Contains IEEE 802 medium access control address of the ComPort device. |
| 1.3.6.1.4.1.1141.2.57.1.1.2 | ColumnhcxStuDstIpAddrIPAddr | read-write | current | allowable IP Address for ComPort. Default 0.0.0.0. |
| 1.3.6.1.4.1.1141.2.57.1.1.3 | ColumnhcxStuDstIpAddrIPMask | read-write | current | IP mask for ComPort. Default is ff.ff.ff.ff. |
| 1.3.6.1.4.1.1141.2.57.1.1.4 | ColumnhcxStuDstIpAddrIPStatus | read-create | current | Used to delete or create an entry. |
| 1.3.6.1.4.1.1141.2.57.1.1.5 | ColumnhcxStuDstIpAddrEntryId | read-only | current | Contains table entry id. |
| 1.3.6.1.4.1.1141.4.90 | NotificationhcxStuAcqEvent | current | This trap is issued only when the acquisition trap is enabled via the hcxStuAcqTrapEnable attribute. Severity WARNING. | |
| 1.3.6.1.4.1.1141.4.91 | NotificationhcxStuDeacqEvent | current | This trap is issued only when the acquisition trap is enabled via the hcxStuAcqTrapEnable attribute. Severity WARNING. | |
| 1.3.6.1.4.1.1141.4.100 | NotificationhcxIncompSwVersion | current | This trap is issued if the configured sw version (in hcxStuConfSwImage) is not applicable to the hw version/hw options reported by the ComPort. This an event w… | |
| 1.3.6.1.4.1.1141.4.101 | NotificationhcxUnavailSwVersion | current | This trap is issued if the configured image cannot be located on the ComController. This an event with no clear condition. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.102 | NotificationhcxStuPingTestComplete | current | This trap is issued when the ping test is completed. This an event with no clear condition. Only severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.103 | NotificationhcxStuEthTestComplete | current | This notification is generated whenever the ComPort loopback test is completed. This shall either be completed after reception of looped back packet(s) or afte… | |
| 1.3.6.1.4.1.1141.4.104 | NotificationhcxStuAcqRangeFail | current | This trap is issued if an RX card reports a failure to range a previously acquired ComPort. Note that the ComPort states are defined in the proxy ComPort MIB. … | |
| 1.3.6.1.4.1.1141.4.105 | NotificationhcxStuAcqOnlineFail | current | This trap is issued if an RX card successfully acquires an ComPort, but the ComPort cannot be placed online due to a ComController or ComPort failure. Only sev… | |
| 1.3.6.1.4.1.1141.4.106 | NotificationhcxStuArpInvalidAddr | current | this trap is generated whenever an invalid ARP IP source address is detected. Severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.107 | NotificationhcxStuArpBadServerAddr | current | this trap is generated whenever the ComPort is detected as utilizing a reserved server address as its source IP address. Severity is WARNING. | |
| 1.3.6.1.4.1.1141.4.108 | NotificationhcxStuRangFailPowerLow | current | This trap is generated when the RX card cannot set a ComPort's power level correctly - the ComPort has too low a power level. This alarm is generated once and … | |
| 1.3.6.1.4.1.1141.4.109 | NotificationhcxStuRangFailPowerHigh | current | This trap is generated when the RX card cannot set a ComPort's power level correctly - the ComPort has too high a power level. This alarm is generated once and… | |
| 1.3.6.1.4.1.1141.4.140 | NotificationhcxStuRangFailLowClear | current | This trap is generated when the RX card successful ranges a ComPort that was previously reported as in the low power state or when a ComPort in that state is d… | |
| 1.3.6.1.4.1.1141.4.141 | NotificationhcxStuRangFailHighClear | current | This trap is generated when the RX card successful ranges a ComPort that was previously reported as in the high power state or when a ComPort in that state is … |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Com21RowStatus | INTEGER { active(1), create(2), destroy(3), deactive(4) } | ||
| FrequencyKhz | INTEGER (0..800000) | ||
| StuGain | INTEGER (18..58) |